Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1

[Nicolas Ferre <nicolas.ferre@atmel.com>]

Le 03/04/2015 23:56, Olof Johansson a �crit :
> On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote:
>> On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
>>> Le 31/03/2015 10:56, Nicolas Ferre a �crit :
>>>> After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
>>>> the macb1 interface refuses to work properly because it tries
>>>> to cling to address 0 which isn't able to communicate in broadcast with
>>>> the mac anymore. The micrel phy on the board is actually configured
>>>> to show up at address 1.
>>>> Adding the phy node and its real address fixes the issue.
>>>>
>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>> Cc: Johan Hovold <johan@kernel.org>
>>>> Cc: <stable@vger.kernel.org> #3.19
>>>> ---
>>>
>>> Arnd, Olof, Kevin,
>>>
>>> It seems late but, is it possible to queue this patch as a 4.0 fixes?
>>>
>>> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
>>> by u-boot previously.
>>
>> Sure, resend it to arm@kernel.org.
>
> Nevermind, I ended up picking it up from the list. Applied.

Cool: thanks Olof!

Bye,

-- 
Nicolas Ferre