* [PATCH 4.1 01/11] x86/boot: Fix overflow warning with 32-bit binutils
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 02/11] perf: Fix ring_buffer_attach() RCU sync, again Greg Kroah-Hartman
` (11 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Matz, Borislav Petkov,
Andrew Morton, Borislav Petkov, H. Peter Anvin, Linus Torvalds,
Peter Zijlstra, Thomas Gleixner, Ingo Molnar
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <bp@alien8.de>
commit 04c17341b42699a5859a8afa05e64ba08a4e5235 upstream.
When building the kernel with 32-bit binutils built with support
only for the i386 target, we get the following warning:
arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31)
The problem is that in that case, binutils' internal type
representation is 32-bit wide and the shift range overflows.
In order to fix this, manipulate the shift expression which
creates the 4GiB constant to not overflow the shift count.
Suggested-by: Michael Matz <matz@suse.de>
Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/head_32.S | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -62,9 +62,16 @@
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
-/* Number of possible pages in the lowmem region */
-LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
-
+/*
+ * Number of possible pages in the lowmem region.
+ *
+ * We shift 2 by 31 instead of 1 by 32 to the left in order to avoid a
+ * gas warning about overflowing shift count when gas has been compiled
+ * with only a host target support using a 32-bit type for internal
+ * representation.
+ */
+LOWMEM_PAGES = (((2<<31) - __PAGE_OFFSET) >> PAGE_SHIFT)
+
/* Enough space to fit pagetables for the low memory linear map */
MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 02/11] perf: Fix ring_buffer_attach() RCU sync, again
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 01/11] x86/boot: Fix overflow warning with 32-bit binutils Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 03/11] perf/x86: Add more Broadwell model numbers Greg Kroah-Hartman
` (10 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleg Nesterov, Peter Zijlstra (Intel),
Alexander Shishkin, Andrew Morton, Andy Lutomirski,
Borislav Petkov, Brian Gerst, Denys Vlasenko, H. Peter Anvin,
Linus Torvalds, Paul E. McKenney, Thomas Gleixner, dave, der.herr,
josh, tj, Ingo Molnar
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit 2f993cf093643b98477c421fa2b9a98dcc940323 upstream.
While looking for other users of get_state/cond_sync. I Found
ring_buffer_attach() and it looks obviously buggy?
Don't we need to ensure that we have "synchronize" _between_
list_del() and list_add() ?
IOW. Suppose that ring_buffer_attach() preempts right_after
get_state_synchronize_rcu() and gp completes before spin_lock().
In this case cond_synchronize_rcu() does nothing and we reuse
->rb_entry without waiting for gp in between?
It also moves the ->rcu_pending check under "if (rb)", to make it
more readable imo.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: josh@joshtriplett.org
Cc: tj@kernel.org
Fixes: b69cf53640da ("perf: Fix a race between ring_buffer_detach() and ring_buffer_attach()")
Link: http://lkml.kernel.org/r/20150530200425.GA15748@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/events/core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4331,20 +4331,20 @@ static void ring_buffer_attach(struct pe
WARN_ON_ONCE(event->rcu_pending);
old_rb = event->rb;
- event->rcu_batches = get_state_synchronize_rcu();
- event->rcu_pending = 1;
-
spin_lock_irqsave(&old_rb->event_lock, flags);
list_del_rcu(&event->rb_entry);
spin_unlock_irqrestore(&old_rb->event_lock, flags);
- }
- if (event->rcu_pending && rb) {
- cond_synchronize_rcu(event->rcu_batches);
- event->rcu_pending = 0;
+ event->rcu_batches = get_state_synchronize_rcu();
+ event->rcu_pending = 1;
}
if (rb) {
+ if (event->rcu_pending) {
+ cond_synchronize_rcu(event->rcu_batches);
+ event->rcu_pending = 0;
+ }
+
spin_lock_irqsave(&rb->event_lock, flags);
list_add_rcu(&event->rb_entry, &rb->event_list);
spin_unlock_irqrestore(&rb->event_lock, flags);
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 03/11] perf/x86: Add more Broadwell model numbers
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 01/11] x86/boot: Fix overflow warning with 32-bit binutils Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 02/11] perf: Fix ring_buffer_attach() RCU sync, again Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 04/11] perf/x86/intel/bts: Fix DS area sharing with x86_pmu events Greg Kroah-Hartman
` (9 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andi Kleen, Peter Zijlstra (Intel),
Andrew Morton, Andy Lutomirski, Borislav Petkov, Brian Gerst,
Denys Vlasenko, H. Peter Anvin, Linus Torvalds, Oleg Nesterov,
Thomas Gleixner, Ingo Molnar
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andi Kleen <ak@linux.intel.com>
commit 4b36f1a4139c9284df74c0f5d7655603d67807df upstream.
This patch adds additional model numbers for Broadwell to perf.
Support for Broadwell with Iris Pro (Intel Core i7-57xxC)
and support for Broadwell Server Xeon.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1434055942-28253-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/perf_event_intel.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -3253,6 +3253,8 @@ __init int intel_pmu_init(void)
case 61: /* 14nm Broadwell Core-M */
case 86: /* 14nm Broadwell Xeon D */
+ case 71: /* 14nm Broadwell + GT3e (Intel Iris Pro graphics) */
+ case 79: /* 14nm Broadwell Server */
x86_pmu.late_ack = true;
memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 04/11] perf/x86/intel/bts: Fix DS area sharing with x86_pmu events
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 03/11] perf/x86: Add more Broadwell model numbers Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 05/11] perf/x86: Honor the architectural performance monitoring version Greg Kroah-Hartman
` (8 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Shishkin,
Peter Zijlstra (Intel), Andrew Morton, Andy Lutomirski,
Borislav Petkov, Brian Gerst, Denys Vlasenko, H. Peter Anvin,
Linus Torvalds, Oleg Nesterov, Thomas Gleixner, acme,
adrian.hunter, Ingo Molnar
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <alexander.shishkin@linux.intel.com>
commit 6b099d9b040b0f3d0aec05b560d7caf879af5077 upstream.
Currently, the intel_bts driver relies on the DS area allocated by the x86_pmu
code in its event_init() path, which is a bug: creating a BTS event while
no x86_pmu events are present results in a NULL pointer dereference.
The same DS area is also used by PEBS sampling, which makes it quite a bit
trickier to have a separate one for intel_bts' purposes.
This patch makes intel_bts driver use the same DS allocation and reference
counting code as x86_pmu to make sure it is always present when either
intel_bts or x86_pmu need it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Link: http://lkml.kernel.org/r/1434024837-9916-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/perf_event.c | 52 ++++++++++++++++++-----------
arch/x86/kernel/cpu/perf_event.h | 4 ++
arch/x86/kernel/cpu/perf_event_intel_bts.c | 9 +++++
3 files changed, 46 insertions(+), 19 deletions(-)
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -270,11 +270,7 @@ msr_fail:
static void hw_perf_event_destroy(struct perf_event *event)
{
- if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) {
- release_pmc_hardware();
- release_ds_buffers();
- mutex_unlock(&pmc_reserve_mutex);
- }
+ x86_release_hardware();
}
void hw_perf_lbr_event_destroy(struct perf_event *event)
@@ -324,6 +320,35 @@ set_ext_hw_attr(struct hw_perf_event *hw
return x86_pmu_extra_regs(val, event);
}
+int x86_reserve_hardware(void)
+{
+ int err = 0;
+
+ if (!atomic_inc_not_zero(&active_events)) {
+ mutex_lock(&pmc_reserve_mutex);
+ if (atomic_read(&active_events) == 0) {
+ if (!reserve_pmc_hardware())
+ err = -EBUSY;
+ else
+ reserve_ds_buffers();
+ }
+ if (!err)
+ atomic_inc(&active_events);
+ mutex_unlock(&pmc_reserve_mutex);
+ }
+
+ return err;
+}
+
+void x86_release_hardware(void)
+{
+ if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) {
+ release_pmc_hardware();
+ release_ds_buffers();
+ mutex_unlock(&pmc_reserve_mutex);
+ }
+}
+
/*
* Check if we can create event of a certain type (that no conflicting events
* are present).
@@ -336,9 +361,10 @@ int x86_add_exclusive(unsigned int what)
return 0;
mutex_lock(&pmc_reserve_mutex);
- for (i = 0; i < ARRAY_SIZE(x86_pmu.lbr_exclusive); i++)
+ for (i = 0; i < ARRAY_SIZE(x86_pmu.lbr_exclusive); i++) {
if (i != what && atomic_read(&x86_pmu.lbr_exclusive[i]))
goto out;
+ }
atomic_inc(&x86_pmu.lbr_exclusive[what]);
ret = 0;
@@ -527,19 +553,7 @@ static int __x86_pmu_event_init(struct p
if (!x86_pmu_initialized())
return -ENODEV;
- err = 0;
- if (!atomic_inc_not_zero(&active_events)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_read(&active_events) == 0) {
- if (!reserve_pmc_hardware())
- err = -EBUSY;
- else
- reserve_ds_buffers();
- }
- if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmc_reserve_mutex);
- }
+ err = x86_reserve_hardware();
if (err)
return err;
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -703,6 +703,10 @@ int x86_add_exclusive(unsigned int what)
void x86_del_exclusive(unsigned int what);
+int x86_reserve_hardware(void);
+
+void x86_release_hardware(void);
+
void hw_perf_lbr_event_destroy(struct perf_event *event);
int x86_setup_perfctr(struct perf_event *event);
--- a/arch/x86/kernel/cpu/perf_event_intel_bts.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_bts.c
@@ -483,17 +483,26 @@ static int bts_event_add(struct perf_eve
static void bts_event_destroy(struct perf_event *event)
{
+ x86_release_hardware();
x86_del_exclusive(x86_lbr_exclusive_bts);
}
static int bts_event_init(struct perf_event *event)
{
+ int ret;
+
if (event->attr.type != bts_pmu.type)
return -ENOENT;
if (x86_add_exclusive(x86_lbr_exclusive_bts))
return -EBUSY;
+ ret = x86_reserve_hardware();
+ if (ret) {
+ x86_del_exclusive(x86_lbr_exclusive_bts);
+ return ret;
+ }
+
event->destroy = bts_event_destroy;
return 0;
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 05/11] perf/x86: Honor the architectural performance monitoring version
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 04/11] perf/x86/intel/bts: Fix DS area sharing with x86_pmu events Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 06/11] perf tools: Fix build breakage if prefix= is specified Greg Kroah-Hartman
` (7 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Imre Palik, Peter Zijlstra (Intel),
Andrew Morton, Andy Lutomirski, Anthony Liguori,
Arnaldo Carvalho de Melo, Borislav Petkov, Brian Gerst,
Denys Vlasenko, H. Peter Anvin, Linus Torvalds, Oleg Nesterov,
Paul Mackerras, Thomas Gleixner, Ingo Molnar
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Palik, Imre" <imrep@amazon.de>
commit 2c33645d366d13b969d936b68b9f4875b1fdddea upstream.
Architectural performance monitoring, version 1, doesn't support fixed counters.
Currently, even if a hypervisor advertises support for architectural
performance monitoring version 1, perf may still try to use the fixed
counters, as the constraints are set up based on the CPU model.
This patch ensures that perf honors the architectural performance monitoring
version returned by CPUID, and it only uses the fixed counters for version 2
and above.
(Some of the ideas in this patch came from Peter Zijlstra.)
Signed-off-by: Imre Palik <imrep@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433767609-1039-1-git-send-email-imrep.amz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/perf_event_intel.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -3324,13 +3324,13 @@ __init int intel_pmu_init(void)
* counter, so do not extend mask to generic counters
*/
for_each_event_constraint(c, x86_pmu.event_constraints) {
- if (c->cmask != FIXED_EVENT_FLAGS
- || c->idxmsk64 == INTEL_PMC_MSK_FIXED_REF_CYCLES) {
- continue;
+ if (c->cmask == FIXED_EVENT_FLAGS
+ && c->idxmsk64 != INTEL_PMC_MSK_FIXED_REF_CYCLES) {
+ c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
}
-
- c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
- c->weight += x86_pmu.num_counters;
+ c->idxmsk64 &=
+ ~(~0UL << (INTEL_PMC_IDX_FIXED + x86_pmu.num_counters_fixed));
+ c->weight = hweight64(c->idxmsk64);
}
}
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 06/11] perf tools: Fix build breakage if prefix= is specified
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 05/11] perf/x86: Honor the architectural performance monitoring version Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 07/11] Bluetooth: ath3k: Add support of 04ca:300d AR3012 device Greg Kroah-Hartman
` (6 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Jiri Olsa, David Ahern,
Arnaldo Carvalho de Melo
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner <lukas@wunner.de>
commit 75e84ab906ef8935cff3df3d8929f1bafea81599 upstream.
Invoking Makefile.perf with prefix= breaks the build since Makefile.perf
hands that variable down to Makefile.build where it overrides
prefix := $(subst ./,,$(OUTPUT)$(dir)/)
leading to errors like this:
No rule to make target '/usrabspath.o', needed by '/usrlibperf-in.o'
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Fixes: c819e2cf2eb6f65d3208d195d7a0edef6108d5
Link: http://lkml.kernel.org/r/5582c48a.84a22b0a.a918.5285SMTPIN_ADDED_MISSING@mx.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/build/Makefile.build | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/tools/build/Makefile.build
+++ b/tools/build/Makefile.build
@@ -94,12 +94,12 @@ obj-y := $(patsubst %/, %/$(obj)-
subdir-obj-y := $(filter %/$(obj)-in.o, $(obj-y))
# '$(OUTPUT)/dir' prefix to all objects
-prefix := $(subst ./,,$(OUTPUT)$(dir)/)
-obj-y := $(addprefix $(prefix),$(obj-y))
-subdir-obj-y := $(addprefix $(prefix),$(subdir-obj-y))
+objprefix := $(subst ./,,$(OUTPUT)$(dir)/)
+obj-y := $(addprefix $(objprefix),$(obj-y))
+subdir-obj-y := $(addprefix $(objprefix),$(subdir-obj-y))
# Final '$(obj)-in.o' object
-in-target := $(prefix)$(obj)-in.o
+in-target := $(objprefix)$(obj)-in.o
PHONY += $(subdir-y)
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 07/11] Bluetooth: ath3k: Add support of 04ca:300d AR3012 device
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 06/11] perf tools: Fix build breakage if prefix= is specified Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 08/11] ath3k: Add support of 0489:e076 " Greg Kroah-Hartman
` (5 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Tunin, Marcel Holtmann
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Tunin <hanipouspilot@gmail.com>
commit 7e730c7f3d1f39c25cf5f7cf70c0ff4c28d7bec7 upstream.
BugLink: https://bugs.launchpad.net/bugs/1394368
This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/ that are not included in linux-firmware yet.
T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=300d Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -88,6 +88,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x04CA, 0x3007) },
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x04CA, 0x300b) },
+ { USB_DEVICE(0x04CA, 0x300d) },
{ USB_DEVICE(0x04CA, 0x300f) },
{ USB_DEVICE(0x04CA, 0x3010) },
{ USB_DEVICE(0x0930, 0x0219) },
@@ -145,6 +146,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -186,6 +186,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 08/11] ath3k: Add support of 0489:e076 AR3012 device
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 07/11] Bluetooth: ath3k: Add support of 04ca:300d AR3012 device Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 09/11] ath3k: add support of 13d3:3474 " Greg Kroah-Hartman
` (4 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Tunin, Marcel Holtmann
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Tunin <hanipouspilot@gmail.com>
commit 692c062e7c282164fd7cda68077f79dafd176eaf upstream.
BugLink: https://bugs.launchpad.net/bugs/1462614
This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/ that are not included in linux-firmware yet.
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e076 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe05f) },
+ { USB_DEVICE(0x0489, 0xe076) },
{ USB_DEVICE(0x0489, 0xe078) },
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -138,6 +139,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -178,6 +178,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 09/11] ath3k: add support of 13d3:3474 AR3012 device
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 08/11] ath3k: Add support of 0489:e076 " Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 1:09 ` [PATCH 4.1 11/11] cdc-acm: Add support of ATOL FPrint fiscal printers Greg Kroah-Hartman
` (3 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Tunin, Marcel Holtmann
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Tunin <hanipouspilot@gmail.com>
commit 0d0cef6183aec0fb6d0c9f00a09ff51ee086bbe2 upstream.
BugLink: https://bugs.launchpad.net/bugs/1427680
This device requires new firmware files
AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
/lib/firmware/ar3k/ that are not included in linux-firmware yet.
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3474 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -115,6 +115,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3423) },
{ USB_DEVICE(0x13d3, 0x3432) },
+ { USB_DEVICE(0x13d3, 0x3474) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -174,6 +175,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -213,6 +213,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 4.1 11/11] cdc-acm: Add support of ATOL FPrint fiscal printers
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 09/11] ath3k: add support of 13d3:3474 " Greg Kroah-Hartman
@ 2015-06-27 1:09 ` Greg Kroah-Hartman
2015-06-27 3:13 ` [PATCH 4.1 00/11] 4.1.1-stable review Shuah Khan
` (2 subsequent siblings)
12 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 1:09 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexey Sokolov
4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Sokolov <sokolov@7pikes.com>
commit 15bf722e6f6c0b884521a0363204532e849deb7f upstream.
ATOL FPrint fiscal printers require usb_clear_halt to be executed
to work properly. Add quirk to fix the issue.
Signed-off-by: Alexey Sokolov <sokolov@7pikes.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/class/cdc-acm.c | 9 +++++++++
drivers/usb/class/cdc-acm.h | 1 +
2 files changed, 10 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1477,6 +1477,11 @@ skip_countries:
goto alloc_fail8;
}
+ if (quirks & CLEAR_HALT_CONDITIONS) {
+ usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress));
+ usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress));
+ }
+
return 0;
alloc_fail8:
if (acm->country_codes) {
@@ -1756,6 +1761,10 @@ static const struct usb_device_id acm_id
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+ .driver_info = CLEAR_HALT_CONDITIONS,
+ },
+
/* Nokia S60 phones expose two ACM channels. The first is
* a modem and is picked up by the standard AT-command
* information below. The second is 'vendor-specific' but
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -133,3 +133,4 @@ struct acm {
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
#define QUIRK_CONTROL_LINE_STATE BIT(6)
+#define CLEAR_HALT_CONDITIONS BIT(7)
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 4.1 00/11] 4.1.1-stable review
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2015-06-27 1:09 ` [PATCH 4.1 11/11] cdc-acm: Add support of ATOL FPrint fiscal printers Greg Kroah-Hartman
@ 2015-06-27 3:13 ` Shuah Khan
2015-06-27 15:37 ` Greg Kroah-Hartman
2015-06-27 6:07 ` Guenter Roeck
2015-06-27 8:18 ` Sudip Mukherjee
12 siblings, 1 reply; 17+ messages in thread
From: Shuah Khan @ 2015-06-27 3:13 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel; +Cc: torvalds, akpm, linux, shuah.kh, stable
On 06/26/2015 07:09 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.1.1 release.
> There are 11 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Mon Jun 29 01:08:53 UTC 2015.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.1-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 4.1 00/11] 4.1.1-stable review
2015-06-27 3:13 ` [PATCH 4.1 00/11] 4.1.1-stable review Shuah Khan
@ 2015-06-27 15:37 ` Greg Kroah-Hartman
0 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 15:37 UTC (permalink / raw)
To: Shuah Khan; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Fri, Jun 26, 2015 at 09:13:38PM -0600, Shuah Khan wrote:
> On 06/26/2015 07:09 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.1.1 release.
> > There are 11 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Mon Jun 29 01:08:53 UTC 2015.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.1.1-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 4.1 00/11] 4.1.1-stable review
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2015-06-27 3:13 ` [PATCH 4.1 00/11] 4.1.1-stable review Shuah Khan
@ 2015-06-27 6:07 ` Guenter Roeck
2015-06-27 15:38 ` Greg Kroah-Hartman
2015-06-27 8:18 ` Sudip Mukherjee
12 siblings, 1 reply; 17+ messages in thread
From: Guenter Roeck @ 2015-06-27 6:07 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel; +Cc: torvalds, akpm, shuah.kh, stable
On 06/26/2015 06:09 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.1.1 release.
> There are 11 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Mon Jun 29 01:08:53 UTC 2015.
> Anything received after that time might be too late.
>
Build results:
total: 124 pass: 124 fail: 0
Qemu test results:
total: 31 pass: 31 fail: 0
Details are available at http://server.roeck-us.net:8010/builders.
Guenter
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 4.1 00/11] 4.1.1-stable review
2015-06-27 6:07 ` Guenter Roeck
@ 2015-06-27 15:38 ` Greg Kroah-Hartman
0 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 15:38 UTC (permalink / raw)
To: Guenter Roeck; +Cc: linux-kernel, torvalds, akpm, shuah.kh, stable
On Fri, Jun 26, 2015 at 11:07:11PM -0700, Guenter Roeck wrote:
> On 06/26/2015 06:09 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 4.1.1 release.
> >There are 11 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Mon Jun 29 01:08:53 UTC 2015.
> >Anything received after that time might be too late.
> >
>
> Build results:
> total: 124 pass: 124 fail: 0
> Qemu test results:
> total: 31 pass: 31 fail: 0
>
> Details are available at http://server.roeck-us.net:8010/builders.
Yeah, I didn't break anything!
thanks for reporting all of these for all 4 trees, much appreciated.
greg k-h
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 4.1 00/11] 4.1.1-stable review
2015-06-27 1:09 [PATCH 4.1 00/11] 4.1.1-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2015-06-27 6:07 ` Guenter Roeck
@ 2015-06-27 8:18 ` Sudip Mukherjee
2015-06-27 15:38 ` Greg Kroah-Hartman
12 siblings, 1 reply; 17+ messages in thread
From: Sudip Mukherjee @ 2015-06-27 8:18 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Fri, Jun 26, 2015 at 06:09:03PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.1.1 release.
> There are 11 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Mon Jun 29 01:08:53 UTC 2015.
> Anything received after that time might be too late.
Compiled and booted on x86_32. No errors in dmesg.
regards
sudip
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 4.1 00/11] 4.1.1-stable review
2015-06-27 8:18 ` Sudip Mukherjee
@ 2015-06-27 15:38 ` Greg Kroah-Hartman
0 siblings, 0 replies; 17+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-27 15:38 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 27, 2015 at 01:48:44PM +0530, Sudip Mukherjee wrote:
> On Fri, Jun 26, 2015 at 06:09:03PM -0700, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.1.1 release.
> > There are 11 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Mon Jun 29 01:08:53 UTC 2015.
> > Anything received after that time might be too late.
> Compiled and booted on x86_32. No errors in dmesg.
Thanks for testing all 4 of these and letting me know.
greg k-h
^ permalink raw reply [flat|nested] 17+ messages in thread