[PATCH 3.12 00/58] 3.12.57-stable review

[PATCH 3.12 00/58] 3.12.57-stable review

[Jiri Slaby]

This is the start of the stable review cycle for the 3.12.57 release.
There are 58 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Mar 18 10:38:57 CET 2016.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	http://kernel.org/pub/linux/kernel/people/jirislaby/stable-review/patch-3.12.57-rc1.xz
and the diffstat can be found below.

thanks,
js

===============


Al Cooper (1):
  usb: Add connected retry on resume for non SS devices

Andreas Schwab (1):
  powerpc: Fix dedotify for binutils >= 2.26

Andy Lutomirski (1):
  x86/entry/compat: Add missing CLAC to entry_INT80_32

Arnd Bergmann (1):
  libata: fix HDIO_GET_32BIT ioctl

Daniele Palmas (1):
  USB: serial: option: add support for Telit LE922 PID 0x1045

David Woodhouse (2):
  jffs2: Fix page lock / f->sem deadlock
  Fix directory hardlinks from deleted directories

Felix Fietkau (1):
  mac80211: minstrel_ht: set default tx aggregation timeout to 0

Hannes Frederic Sowa (1):
  unix: correctly track in-flight fds in sending process user_struct

Harvey Hunt (1):
  libata: Align ata_device's id on a cacheline

Jason Andryuk (1):
  lib/ucs2_string: Correct ucs2 -> utf8 conversion

Jiri Slaby (1):
  Revert "drm/radeon: hold reference to fences in radeon_sa_bo_new"

Johannes Berg (1):
  wext: fix message delay/ordering

Justin Maggard (1):
  cifs: fix out-of-bounds access in lease parsing

Konrad Rzeszutek Wilk (6):
  xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI
    or MSI-X enabled
  xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has
    MSI or MSI-X enabled
  xen/pciback: Do not install an IRQ handler for MSI interrupts.
  xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has
    MSI(X) enabled.
  xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.
  xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY

Konstantin Shkolnyy (3):
  USB: cp210x: flush device queues at close
  USB: cp210x: relocate private data from USB interface to port
  USB: cp210x: work around cp2108 GET_LINE_CTL bug

Maciej W. Rozycki (1):
  MIPS: traps: Fix SIGFPE information leak from `do_ov' and
    `do_trap_or_bp'

Marcelo Tosatti (1):
  KVM: x86: move steal time initialization to vcpu entry time

Matt Fleming (1):
  efi: Add pstore variables to the deletion whitelist

Michal Marek (1):
  genksyms: Handle string literals with spaces in reference files

NeilBrown (1):
  nfsd: fix problem with setting ACL on directories

Oliver Neukum (1):
  [media] usbvision fix overflow of interfaces array

Pavel Shilovsky (1):
  CIFS: Fix SMB2+ interim response processing for read requests

Peter Jones (5):
  lib/ucs2_string: Add ucs2 -> utf8 helper functions
  efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
  efi: Do variable name validation tests in utf8
  efi: Make our variable validation list include the guid
  efi: Make efivarfs entries immutable by default

Radim Krčmář (1):
  KVM: VMX: disable PEBS before a guest entry

Richard Weinberger (1):
  ubi: Fix out of bounds write in volume update code

Rusty Russell (1):
  modules: fix longstanding /proc/kallsyms vs module insertion race.

Steven Rostedt (Red Hat) (1):
  tracing: Fix check for cpu online when event is disabled

Suravee Suthikulpanit (1):
  iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered

Takashi Iwai (10):
  ALSA: ctl: Fix ioctls for X32 ABI
  ALSA: rawmidi: Fix ioctls X32 ABI
  ALSA: timer: Fix ioctls for X32 ABI
  ALSA: seq: oss: Don't drain at closing a client
  ALSA: hdspm: Fix wrong boolean ctl value accesses
  ALSA: hdsp: Fix wrong boolean ctl value accesses
  ALSA: hdspm: Fix zero-division
  ALSA: timer: Fix broken compat timer user status ioctl
  ASoC: wm8994: Fix enum ctl accesses in a wrong type
  ASoC: wm8958: Fix enum ctl accesses in a wrong type

Thomas Betker (1):
  Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"

Timothy Pearson (1):
  drm/ast: Fix incorrect register check for DRAM width

Todd E Brandt (1):
  PM / sleep / x86: Fix crash on graph trace through x86 suspend

Vasu Dev (2):
  ixgbe: use correct FCoE DDP max check
  ixgbe: fix broken PFC with X550

Vittorio Alfieri (1):
  USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

Yegor Yefremov (1):
  USB: serial: option: add support for Quectel UC20

willy tarreau (1):
  unix: properly account for FDs passed over unix sockets

 Documentation/filesystems/efivarfs.txt             |   7 +
 arch/mips/kernel/traps.c                           |  13 +-
 arch/powerpc/kernel/module_64.c                    |   2 +-
 arch/x86/ia32/ia32entry.S                          |   1 +
 arch/x86/kernel/acpi/sleep.c                       |   7 +
 arch/x86/kvm/vmx.c                                 |   7 +
 arch/x86/kvm/x86.c                                 |   9 +-
 drivers/ata/libata-scsi.c                          |  11 +-
 drivers/firmware/efi/efivars.c                     |  34 ++---
 drivers/firmware/efi/vars.c                        | 164 +++++++++++++++------
 drivers/gpu/drm/ast/ast_main.c                     |   2 +-
 drivers/gpu/drm/radeon/radeon_sa.c                 |   5 -
 drivers/iommu/amd_iommu_init.c                     |  34 +++--
 drivers/media/usb/usbvision/usbvision-video.c      |   7 +
 drivers/mtd/ubi/upd.c                              |   2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c |   6 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c      |   4 +-
 drivers/usb/core/hub.c                             |  16 +-
 drivers/usb/serial/cp210x.c                        | 129 +++++++++++++---
 drivers/usb/serial/option.c                        |   5 +
 drivers/xen/xen-pciback/pciback_ops.c              |  61 ++++++--
 fs/cifs/cifssmb.c                                  |  21 ++-
 fs/cifs/smb2pdu.c                                  |  24 +--
 fs/efivarfs/file.c                                 |  71 +++++++++
 fs/efivarfs/inode.c                                |  30 ++--
 fs/efivarfs/internal.h                             |   3 +-
 fs/efivarfs/super.c                                |  16 +-
 fs/jffs2/README.Locking                            |   5 +-
 fs/jffs2/build.c                                   |  75 +++++++---
 fs/jffs2/file.c                                    |  39 +++--
 fs/jffs2/gc.c                                      |  17 ++-
 fs/jffs2/nodelist.h                                |   6 +-
 fs/nfsd/vfs.c                                      |   2 +-
 include/linux/ata.h                                |   4 +-
 include/linux/efi.h                                |   9 +-
 include/linux/libata.h                             |   2 +-
 include/linux/module.h                             |  17 ++-
 include/linux/sched.h                              |   1 +
 include/linux/tracepoint.h                         |  17 ++-
 include/linux/ucs2_string.h                        |   4 +
 include/net/af_unix.h                              |   4 +-
 include/net/scm.h                                  |   1 +
 kernel/module.c                                    | 111 ++++++++------
 lib/ucs2_string.c                                  |  62 ++++++++
 net/core/scm.c                                     |   7 +
 net/mac80211/rc80211_minstrel_ht.c                 |   2 +-
 net/unix/af_unix.c                                 |  26 +++-
 net/unix/garbage.c                                 |  20 ++-
 net/wireless/wext-core.c                           |  51 +++++--
 scripts/genksyms/genksyms.c                        |   6 +-
 sound/core/control_compat.c                        |  90 +++++++++--
 sound/core/rawmidi_compat.c                        |  53 +++++++
 sound/core/seq/oss/seq_oss.c                       |   2 -
 sound/core/seq/oss/seq_oss_device.h                |   1 -
 sound/core/seq/oss/seq_oss_init.c                  |  17 ---
 sound/core/timer_compat.c                          |  18 ++-
 sound/pci/rme9652/hdsp.c                           |   4 +-
 sound/pci/rme9652/hdspm.c                          |  16 +-
 sound/soc/codecs/wm8958-dsp2.c                     |   8 +-
 sound/soc/codecs/wm8994.c                          |   4 +-
 tools/testing/selftests/efivarfs/efivarfs.sh       |  19 ++-
 tools/testing/selftests/efivarfs/open-unlink.c     |  72 ++++++++-
 62 files changed, 1098 insertions(+), 385 deletions(-)

-- 
2.7.3

[PATCH 3.12 01/58] nfsd: fix problem with setting ACL on directories

[Jiri Slaby]

From: NeilBrown <neilb@suse.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

This is a regression of 3.12 stable commit
ba1816b40a87a3f3c4ca9cd54a593a10d87bd391 (nfsd: fix NFS regression).

If a non-inherited ACL is set on a directory, nfsd will try to set the Posix
default ACL to NULL.  This gets converted to "" by generic_setxattr().
As "" is not a valid posix acl attribute value, this results in an error.

So instead of setting the xattr to NULL, remove it.

Fixes: ba1816b40a ("nfsd: fix NFS regression")
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Sergio Gelato <Sergio.Gelato@astro.su.se>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/nfsd/vfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index fafac65804d6..e5f146c7c871 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -510,7 +510,7 @@ set_nfsv4_acl_one(struct dentry *dentry, struct posix_acl *pacl, char *key)
 	int error = 0;
 
 	if (!pacl)
-		return vfs_setxattr(dentry, key, NULL, 0, 0);
+		return vfs_removexattr(dentry, key);
 
 	buflen = posix_acl_xattr_size(pacl->a_count);
 	buf = kmalloc(buflen, GFP_KERNEL);
-- 
2.7.3

Re: [PATCH 3.12 01/58] nfsd: fix problem with setting ACL on directories

[Sergio Gelato]

* Jiri Slaby [2016-03-16 11:58:46 +0100]:
> From: NeilBrown <neilb@suse.com>
> 
> 3.12-stable review patch.  If anyone has any objections, please let me know.

> If a non-inherited ACL is set on a directory, nfsd will try to set the Posix
> default ACL to NULL.  This gets converted to "" by generic_setxattr().
> As "" is not a valid posix acl attribute value, this results in an error.
> 
> So instead of setting the xattr to NULL, remove it.

There is similar code in nfsd_set_posix_acl() further down in the same source
file which skips the vfs_removexattr() call for default ACLs on non-directories
(there shouldn't be too many of these) and ignores ENODATA returns from
vfs_removexattr(). Are these precautions guaranteed to be unnecessary here in
set_nfsv4_acl_one() ?

> Fixes: ba1816b40a ("nfsd: fix NFS regression")
> Signed-off-by: NeilBrown <neilb@suse.com>
> Cc: Sergio Gelato <Sergio.Gelato@astro.su.se>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> ---
>  fs/nfsd/vfs.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
> index fafac65804d6..e5f146c7c871 100644
> --- a/fs/nfsd/vfs.c
> +++ b/fs/nfsd/vfs.c
> @@ -510,7 +510,7 @@ set_nfsv4_acl_one(struct dentry *dentry, struct posix_acl *pacl, char *key)
>  	int error = 0;
>  
>  	if (!pacl)
> -		return vfs_setxattr(dentry, key, NULL, 0, 0);
> +		return vfs_removexattr(dentry, key);
>  
>  	buflen = posix_acl_xattr_size(pacl->a_count);
>  	buf = kmalloc(buflen, GFP_KERNEL);
> -- 
> 2.7.3
> 

Re: [PATCH 3.12 01/58] nfsd: fix problem with setting ACL on directories

[NeilBrown]

[-- Attachment #1: Type: text/plain, Size: 1935 bytes --]

On Wed, Mar 16 2016, Sergio Gelato wrote:

> * Jiri Slaby [2016-03-16 11:58:46 +0100]:
>> From: NeilBrown <neilb@suse.com>
>> 
>> 3.12-stable review patch.  If anyone has any objections, please let me know.
>
>> If a non-inherited ACL is set on a directory, nfsd will try to set the Posix
>> default ACL to NULL.  This gets converted to "" by generic_setxattr().
>> As "" is not a valid posix acl attribute value, this results in an error.
>> 
>> So instead of setting the xattr to NULL, remove it.
>
> There is similar code in nfsd_set_posix_acl() further down in the same source
> file which skips the vfs_removexattr() call for default ACLs on non-directories
> (there shouldn't be too many of these) and ignores ENODATA returns from
> vfs_removexattr(). Are these precautions guaranteed to be unnecessary here in
> set_nfsv4_acl_one() ?

Those are not precautions, they are optimisations.  The vfs_removexattr
call would not be harmful, but would be unnecessary.
So we don't need to worry about that for set_nfsv4_acl_one - we only
apply optimisations to -stable if they are very significant.

Thanks,
NeilBrown


>
>> Fixes: ba1816b40a ("nfsd: fix NFS regression")
>> Signed-off-by: NeilBrown <neilb@suse.com>
>> Cc: Sergio Gelato <Sergio.Gelato@astro.su.se>
>> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
>> ---
>>  fs/nfsd/vfs.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> 
>> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
>> index fafac65804d6..e5f146c7c871 100644
>> --- a/fs/nfsd/vfs.c
>> +++ b/fs/nfsd/vfs.c
>> @@ -510,7 +510,7 @@ set_nfsv4_acl_one(struct dentry *dentry, struct posix_acl *pacl, char *key)
>>  	int error = 0;
>>  
>>  	if (!pacl)
>> -		return vfs_setxattr(dentry, key, NULL, 0, 0);
>> +		return vfs_removexattr(dentry, key);
>>  
>>  	buflen = posix_acl_xattr_size(pacl->a_count);
>>  	buf = kmalloc(buflen, GFP_KERNEL);
>> -- 
>> 2.7.3
>> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]

[PATCH 3.12 02/58] unix: properly account for FDs passed over unix sockets

[Jiri Slaby]

From: willy tarreau <w@1wt.eu>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

[ Upstream commit 712f4aad406bb1ed67f3f98d04c044191f0ff593 ]

It is possible for a process to allocate and accumulate far more FDs than
the process' limit by sending them over a unix socket then closing them
to keep the process' fd count low.

This change addresses this problem by keeping track of the number of FDs
in flight per user and preventing non-privileged processes from having
more FDs in flight than their configured FD limit.

Cc: Michal Kubecek <mkubecek@suse.com>
Reported-by: socketpair@gmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Mitigates: CVE-2013-4312 (Linux 2.0+)
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/sched.h |  1 +
 net/unix/af_unix.c    | 24 ++++++++++++++++++++----
 net/unix/garbage.c    | 16 ++++++++++++----
 3 files changed, 33 insertions(+), 8 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index a4d7d19fc338..3ecea51ea060 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -664,6 +664,7 @@ struct user_struct {
 	unsigned long mq_bytes;	/* How many bytes can be allocated to mqueue? */
 #endif
 	unsigned long locked_shm; /* How many pages of mlocked shm ? */
+	unsigned long unix_inflight;	/* How many files in flight in unix sockets */
 
 #ifdef CONFIG_KEYS
 	struct key *uid_keyring;	/* UID specific keyring */
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index c5536b7d8ce4..758edb3bd10b 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1484,6 +1484,21 @@ static void unix_destruct_scm(struct sk_buff *skb)
 	sock_wfree(skb);
 }
 
+/*
+ * The "user->unix_inflight" variable is protected by the garbage
+ * collection lock, and we just read it locklessly here. If you go
+ * over the limit, there might be a tiny race in actually noticing
+ * it across threads. Tough.
+ */
+static inline bool too_many_unix_fds(struct task_struct *p)
+{
+	struct user_struct *user = current_user();
+
+	if (unlikely(user->unix_inflight > task_rlimit(p, RLIMIT_NOFILE)))
+		return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN);
+	return false;
+}
+
 #define MAX_RECURSION_LEVEL 4
 
 static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
@@ -1492,6 +1507,9 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 	unsigned char max_level = 0;
 	int unix_sock_count = 0;
 
+	if (too_many_unix_fds(current))
+		return -ETOOMANYREFS;
+
 	for (i = scm->fp->count - 1; i >= 0; i--) {
 		struct sock *sk = unix_get_socket(scm->fp->fp[i]);
 
@@ -1513,10 +1531,8 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 	if (!UNIXCB(skb).fp)
 		return -ENOMEM;
 
-	if (unix_sock_count) {
-		for (i = scm->fp->count - 1; i >= 0; i--)
-			unix_inflight(scm->fp->fp[i]);
-	}
+	for (i = scm->fp->count - 1; i >= 0; i--)
+		unix_inflight(scm->fp->fp[i]);
 	return max_level;
 }
 
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 9bc73f87f64a..06730fe6ad9d 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -125,9 +125,12 @@ struct sock *unix_get_socket(struct file *filp)
 void unix_inflight(struct file *fp)
 {
 	struct sock *s = unix_get_socket(fp);
+
+	spin_lock(&unix_gc_lock);
+
 	if (s) {
 		struct unix_sock *u = unix_sk(s);
-		spin_lock(&unix_gc_lock);
+
 		if (atomic_long_inc_return(&u->inflight) == 1) {
 			BUG_ON(!list_empty(&u->link));
 			list_add_tail(&u->link, &gc_inflight_list);
@@ -135,22 +138,27 @@ void unix_inflight(struct file *fp)
 			BUG_ON(list_empty(&u->link));
 		}
 		unix_tot_inflight++;
-		spin_unlock(&unix_gc_lock);
 	}
+	fp->f_cred->user->unix_inflight++;
+	spin_unlock(&unix_gc_lock);
 }
 
 void unix_notinflight(struct file *fp)
 {
 	struct sock *s = unix_get_socket(fp);
+
+	spin_lock(&unix_gc_lock);
+
 	if (s) {
 		struct unix_sock *u = unix_sk(s);
-		spin_lock(&unix_gc_lock);
+
 		BUG_ON(list_empty(&u->link));
 		if (atomic_long_dec_and_test(&u->inflight))
 			list_del_init(&u->link);
 		unix_tot_inflight--;
-		spin_unlock(&unix_gc_lock);
 	}
+	fp->f_cred->user->unix_inflight--;
+	spin_unlock(&unix_gc_lock);
 }
 
 static void scan_inflight(struct sock *x, void (*func)(struct unix_sock *),
-- 
2.7.3

[PATCH 3.12 03/58] unix: correctly track in-flight fds in sending process user_struct

[Jiri Slaby]

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 415e3d3e90ce9e18727e8843ae343eda5a58fad6 upstream.

The commit referenced in the Fixes tag incorrectly accounted the number
of in-flight fds over a unix domain socket to the original opener
of the file-descriptor. This allows another process to arbitrary
deplete the original file-openers resource limit for the maximum of
open files. Instead the sending processes and its struct cred should
be credited.

To do so, we add a reference counted struct user_struct pointer to the
scm_fp_list and use it to account for the number of inflight unix fds.

Fixes: 712f4aad406bb1 ("unix: properly account for FDs passed over unix sockets")
Reported-by: David Herrmann <dh.herrmann@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Michal Kubecek <mkubecek@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/net/af_unix.h | 4 ++--
 include/net/scm.h     | 1 +
 net/core/scm.c        | 7 +++++++
 net/unix/af_unix.c    | 4 ++--
 net/unix/garbage.c    | 8 ++++----
 5 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index e830c3dff61a..7bb69c9c3c43 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -6,8 +6,8 @@
 #include <linux/mutex.h>
 #include <net/sock.h>
 
-void unix_inflight(struct file *fp);
-void unix_notinflight(struct file *fp);
+void unix_inflight(struct user_struct *user, struct file *fp);
+void unix_notinflight(struct user_struct *user, struct file *fp);
 void unix_gc(void);
 void wait_for_unix_gc(void);
 struct sock *unix_get_socket(struct file *filp);
diff --git a/include/net/scm.h b/include/net/scm.h
index 8de2d37d2077..d00cd43a990c 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -21,6 +21,7 @@ struct scm_creds {
 struct scm_fp_list {
 	short			count;
 	short			max;
+	struct user_struct	*user;
 	struct file		*fp[SCM_MAX_FD];
 };
 
diff --git a/net/core/scm.c b/net/core/scm.c
index d30eb057fa7b..cad57a1390dd 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -87,6 +87,7 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
 		*fplp = fpl;
 		fpl->count = 0;
 		fpl->max = SCM_MAX_FD;
+		fpl->user = NULL;
 	}
 	fpp = &fpl->fp[fpl->count];
 
@@ -107,6 +108,10 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
 		*fpp++ = file;
 		fpl->count++;
 	}
+
+	if (!fpl->user)
+		fpl->user = get_uid(current_user());
+
 	return num;
 }
 
@@ -119,6 +124,7 @@ void __scm_destroy(struct scm_cookie *scm)
 		scm->fp = NULL;
 		for (i=fpl->count-1; i>=0; i--)
 			fput(fpl->fp[i]);
+		free_uid(fpl->user);
 		kfree(fpl);
 	}
 }
@@ -337,6 +343,7 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl)
 		for (i = 0; i < fpl->count; i++)
 			get_file(fpl->fp[i]);
 		new_fpl->max = new_fpl->count;
+		new_fpl->user = get_uid(fpl->user);
 	}
 	return new_fpl;
 }
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 758edb3bd10b..3974413f78e7 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1467,7 +1467,7 @@ static void unix_detach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 	UNIXCB(skb).fp = NULL;
 
 	for (i = scm->fp->count-1; i >= 0; i--)
-		unix_notinflight(scm->fp->fp[i]);
+		unix_notinflight(scm->fp->user, scm->fp->fp[i]);
 }
 
 static void unix_destruct_scm(struct sk_buff *skb)
@@ -1532,7 +1532,7 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 		return -ENOMEM;
 
 	for (i = scm->fp->count - 1; i >= 0; i--)
-		unix_inflight(scm->fp->fp[i]);
+		unix_inflight(scm->fp->user, scm->fp->fp[i]);
 	return max_level;
 }
 
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 06730fe6ad9d..a72182d6750f 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -122,7 +122,7 @@ struct sock *unix_get_socket(struct file *filp)
  *	descriptor if it is for an AF_UNIX socket.
  */
 
-void unix_inflight(struct file *fp)
+void unix_inflight(struct user_struct *user, struct file *fp)
 {
 	struct sock *s = unix_get_socket(fp);
 
@@ -139,11 +139,11 @@ void unix_inflight(struct file *fp)
 		}
 		unix_tot_inflight++;
 	}
-	fp->f_cred->user->unix_inflight++;
+	user->unix_inflight++;
 	spin_unlock(&unix_gc_lock);
 }
 
-void unix_notinflight(struct file *fp)
+void unix_notinflight(struct user_struct *user, struct file *fp)
 {
 	struct sock *s = unix_get_socket(fp);
 
@@ -157,7 +157,7 @@ void unix_notinflight(struct file *fp)
 			list_del_init(&u->link);
 		unix_tot_inflight--;
 	}
-	fp->f_cred->user->unix_inflight--;
+	user->unix_inflight--;
 	spin_unlock(&unix_gc_lock);
 }
 
-- 
2.7.3

[PATCH 3.12 04/58] USB: cp210x: flush device queues at close

[Jiri Slaby]

From: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit ebfb319bb601e501f77809a83b0b69b529c22a8d upstream.

Flush all device queues at close in order to work around a cp2108 Tx
queue bug.

Occasionally, writing data and immediately closing the port makes cp2108
stop responding. The device has to be unplugged to clear the error.
The failure is induced by shutting down the device while its Tx queue
still has unsent data. This condition is avoided by issuing PURGE command
from the close() callback.

This change is applied to all cp210x devices. Clearing internal queues on
close is generally good.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
[johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/cp210x.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f288f3c1f5e2..9bd71e00954f 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -304,6 +304,14 @@ static struct usb_serial_driver * const serial_drivers[] = {
 #define CONTROL_WRITE_RTS	0x0200
 
 /*
+ * CP210X_PURGE - 16 bits passed in wValue of USB request.
+ * SiLabs app note AN571 gives a strange description of the 4 bits:
+ * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
+ * writing 1 to all, however, purges cp2108 well enough to avoid the hang.
+ */
+#define PURGE_ALL		0x000f
+
+/*
  * cp210x_get_config
  * Reads from the CP210x configuration registers
  * 'size' is specified in bytes.
@@ -482,7 +490,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void cp210x_close(struct usb_serial_port *port)
 {
+	unsigned int purge_ctl;
+
 	usb_serial_generic_close(port);
+
+	/* Clear both queues; cp2108 needs this to avoid an occasional hang */
+	purge_ctl = PURGE_ALL;
+	cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2);
+
 	cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
 }
 
-- 
2.7.3

[PATCH 3.12 05/58] USB: cp210x: relocate private data from USB interface to port

[Jiri Slaby]

From: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit e2ae67a3b55188b0342522d8139acf013feb2a69 upstream.

This change is preparation for implementing a cp2108 bug workaround.
The workaround requires storing some private data. Right now the data is
attached to the USB interface and allocated in the attach() callback.
The bug detection requires USB I/O which is done easier from port_probe()
callback rather than attach(). Since the USB access functions take port
as a parameter, and since the private data is used exclusively by these
functions, it can be allocated in port_probe(). Also, all cp210x devices
have exactly 1 port per USB iterface, so moving private data from the USB
interface to port is trivial.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/cp210x.c | 43 +++++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 9bd71e00954f..296488511bd6 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -43,8 +43,8 @@ static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
 static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
-static int cp210x_startup(struct usb_serial *);
-static void cp210x_release(struct usb_serial *);
+static int cp210x_port_probe(struct usb_serial_port *);
+static int cp210x_port_remove(struct usb_serial_port *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 
 static const struct usb_device_id id_table[] = {
@@ -200,7 +200,7 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-struct cp210x_serial_private {
+struct cp210x_port_private {
 	__u8			bInterfaceNumber;
 };
 
@@ -219,8 +219,8 @@ static struct usb_serial_driver cp210x_device = {
 	.set_termios		= cp210x_set_termios,
 	.tiocmget		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
-	.attach			= cp210x_startup,
-	.release		= cp210x_release,
+	.port_probe		= cp210x_port_probe,
+	.port_remove		= cp210x_port_remove,
 	.dtr_rts		= cp210x_dtr_rts
 };
 
@@ -322,7 +322,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -338,7 +338,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
-				spriv->bInterfaceNumber, buf, size,
+				port_priv->bInterfaceNumber, buf, size,
 				USB_CTRL_GET_TIMEOUT);
 
 	/* Convert data into an array of integers */
@@ -369,7 +369,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -390,13 +390,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
-				spriv->bInterfaceNumber, buf, size,
+				port_priv->bInterfaceNumber, buf, size,
 				USB_CTRL_SET_TIMEOUT);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_INTERFACE, data[0],
-				spriv->bInterfaceNumber, NULL, 0,
+				port_priv->bInterfaceNumber, NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
 	}
 
@@ -885,29 +885,32 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
 	cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
 }
 
-static int cp210x_startup(struct usb_serial *serial)
+static int cp210x_port_probe(struct usb_serial_port *port)
 {
+	struct usb_serial *serial = port->serial;
 	struct usb_host_interface *cur_altsetting;
-	struct cp210x_serial_private *spriv;
+	struct cp210x_port_private *port_priv;
 
-	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
-	if (!spriv)
+	port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+	if (!port_priv)
 		return -ENOMEM;
 
 	cur_altsetting = serial->interface->cur_altsetting;
-	spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
+	port_priv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
 
-	usb_set_serial_data(serial, spriv);
+	usb_set_serial_port_data(port, port_priv);
 
 	return 0;
 }
 
-static void cp210x_release(struct usb_serial *serial)
+static int cp210x_port_remove(struct usb_serial_port *port)
 {
-	struct cp210x_serial_private *spriv;
+	struct cp210x_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(port);
+	kfree(port_priv);
 
-	spriv = usb_get_serial_data(serial);
-	kfree(spriv);
+	return 0;
 }
 
 module_usb_serial_driver(serial_drivers, id_table);
-- 
2.7.3

[PATCH 3.12 06/58] USB: cp210x: work around cp2108 GET_LINE_CTL bug

[Jiri Slaby]

From: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit d0bf1ff0ae322aca59b00b9a2ad121d35a77e78f upstream.

Add helper to access line-control register in order to work around a
cp2108 GET_LINE_CTL bug.

cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped.
However, SET_LINE_CTL functions properly. When the driver tries to modify
the register, it reads it, modifies some bits and writes back. Because the
read bytes were swapped, this often results in an invalid value to be
written. In turn, this causes cp2108 respond with a stall. The stall
sometimes doesn't clear properly and cp2108 starts responding to following
valid commands also with stalls, effectively failing.

Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
[johan: amend commit message, modify probe error handling ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/cp210x.c | 70 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 66 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 296488511bd6..13c3aa352ebe 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -202,6 +202,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct cp210x_port_private {
 	__u8			bInterfaceNumber;
+	bool			has_swapped_line_ctl;
 };
 
 static struct usb_serial_driver cp210x_device = {
@@ -426,6 +427,60 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
 }
 
 /*
+ * Detect CP2108 GET_LINE_CTL bug and activate workaround.
+ * Write a known good value 0x800, read it back.
+ * If it comes back swapped the bug is detected.
+ * Preserve the original register value.
+ */
+static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	unsigned int line_ctl_save;
+	unsigned int line_ctl_test;
+	int err;
+
+	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2);
+	if (err)
+		return err;
+
+	line_ctl_test = 0x800;
+	err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2);
+	if (err)
+		return err;
+
+	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2);
+	if (err)
+		return err;
+
+	if (line_ctl_test == 8) {
+		port_priv->has_swapped_line_ctl = true;
+		line_ctl_save = swab16((u16)line_ctl_save);
+	}
+
+	return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2);
+}
+
+/*
+ * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL)
+ * to workaround cp2108 bug and get correct value.
+ */
+static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl)
+{
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int err;
+
+	err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2);
+	if (err)
+		return err;
+
+	/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
+	if (port_priv->has_swapped_line_ctl)
+		*ctl = swab16((u16)(*ctl));
+
+	return 0;
+}
+
+/*
  * cp210x_quantise_baudrate
  * Quantises the baud rate as per AN205 Table 1
  */
@@ -542,7 +597,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 
 	cflag = *cflagp;
 
-	cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+	cp210x_get_line_ctl(port, &bits);
 	cflag &= ~CSIZE;
 	switch (bits & BITS_DATA_MASK) {
 	case BITS_DATA_5:
@@ -710,7 +765,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+		cp210x_get_line_ctl(port, &bits);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
 		case CS5:
@@ -744,7 +799,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 
 	if ((cflag     & (PARENB|PARODD|CMSPAR)) !=
 	    (old_cflag & (PARENB|PARODD|CMSPAR))) {
-		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+		cp210x_get_line_ctl(port, &bits);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
 			if (cflag & CMSPAR) {
@@ -770,7 +825,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
-		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
+		cp210x_get_line_ctl(port, &bits);
 		bits &= ~BITS_STOP_MASK;
 		if (cflag & CSTOPB) {
 			bits |= BITS_STOP_2;
@@ -890,6 +945,7 @@ static int cp210x_port_probe(struct usb_serial_port *port)
 	struct usb_serial *serial = port->serial;
 	struct usb_host_interface *cur_altsetting;
 	struct cp210x_port_private *port_priv;
+	int ret;
 
 	port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
 	if (!port_priv)
@@ -900,6 +956,12 @@ static int cp210x_port_probe(struct usb_serial_port *port)
 
 	usb_set_serial_port_data(port, port_priv);
 
+	ret = cp210x_detect_swapped_line_ctl(port);
+	if (ret) {
+		kfree(port_priv);
+		return ret;
+	}
+
 	return 0;
 }
 
-- 
2.7.3

[PATCH 3.12 07/58] [media] usbvision fix overflow of interfaces array

[Jiri Slaby]

From: Oliver Neukum <oneukum@suse.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 588afcc1c0e45358159090d95bf7b246fb67565f upstream.

This fixes the crash reported in:
http://seclists.org/bugtraq/2015/Oct/35
The interface number needs a sanity check.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/media/usb/usbvision/usbvision-video.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index ea5ec8ed67a7..3cf12da58787 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -1538,6 +1538,13 @@ static int usbvision_probe(struct usb_interface *intf,
 	printk(KERN_INFO "%s: %s found\n", __func__,
 				usbvision_device_data[model].model_string);
 
+	/*
+	 * this is a security check.
+	 * an exploit using an incorrect bInterfaceNumber is known
+	 */
+	if (ifnum >= USB_MAXINTERFACES || !dev->actconfig->interface[ifnum])
+		return -ENODEV;
+
 	if (usbvision_device_data[model].interface >= 0)
 		interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
 	else
-- 
2.7.3

[PATCH 3.12 08/58] usb: Add connected retry on resume for non SS devices

[Jiri Slaby]

From: Al Cooper <alcooperx@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 6b82b1223e3b14afd89d167795671a9f4f77b2f0 upstream.

Currently usb_port_resume waits for up to 2 seconds for CONNECT
status for SS devices only. This change will do the same thing for
non-SS devices even though the reason is a little different. This
will fix an issue where VBUS is turned off during system wide
"suspend to ram" and some 2.0 devices take greater than the current
max of 100ms to show connected after VBUS is enabled. This is most
commonly seen on hard drive based devices and USB3.0 devices plugged
into a 2.0 only port.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/core/hub.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3afe47870e95..a7de5daae6d3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3167,7 +3167,7 @@ static int finish_port_resume(struct usb_device *udev)
 /*
  * There are some SS USB devices which take longer time for link training.
  * XHCI specs 4.19.4 says that when Link training is successful, port
- * sets CSC bit to 1. So if SW reads port status before successful link
+ * sets CCS bit to 1. So if SW reads port status before successful link
  * training, then it will not find device to be present.
  * USB Analyzer log with such buggy devices show that in some cases
  * device switch on the RX termination after long delay of host enabling
@@ -3178,14 +3178,17 @@ static int finish_port_resume(struct usb_device *udev)
  * routine implements a 2000 ms timeout for link training. If in a case
  * link trains before timeout, loop will exit earlier.
  *
+ * There are also some 2.0 hard drive based devices and 3.0 thumb
+ * drives that, when plugged into a 2.0 only port, take a long
+ * time to set CCS after VBUS enable.
+ *
  * FIXME: If a device was connected before suspend, but was removed
  * while system was asleep, then the loop in the following routine will
  * only exit at timeout.
  *
- * This routine should only be called when persist is enabled for a SS
- * device.
+ * This routine should only be called when persist is enabled.
  */
-static int wait_for_ss_port_enable(struct usb_device *udev,
+static int wait_for_connected(struct usb_device *udev,
 		struct usb_hub *hub, int *port1,
 		u16 *portchange, u16 *portstatus)
 {
@@ -3198,6 +3201,7 @@ static int wait_for_ss_port_enable(struct usb_device *udev,
 		delay_ms += 20;
 		status = hub_port_status(hub, *port1, portstatus, portchange);
 	}
+	dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms);
 	return status;
 }
 
@@ -3303,8 +3307,8 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	clear_bit(port1, hub->busy_bits);
 
-	if (udev->persist_enabled && hub_is_superspeed(hub->hdev))
-		status = wait_for_ss_port_enable(udev, hub, &port1, &portchange,
+	if (udev->persist_enabled)
+		status = wait_for_connected(udev, hub, &port1, &portchange,
 				&portstatus);
 
 	status = check_port_resume_type(udev,
-- 
2.7.3

[PATCH 3.12 09/58] ixgbe: use correct FCoE DDP max check

[Jiri Slaby]

From: Vasu Dev <vasu.dev@intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit f10166aba2def9bc6443290231c60f7e2f70129b upstream.

Use fcoe_ddp_xid from netdev as this is correctly set for different
device IDs to avoid DDP skip error on X550 as "xid=0x20b out-of-range"

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index f58db453a97e..68bdcb138334 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -75,7 +75,7 @@ int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
 	if (!netdev)
 		goto out_ddp_put;
 
-	if (xid >= IXGBE_FCOE_DDP_MAX)
+	if (xid >= netdev->fcoe_ddp_xid)
 		goto out_ddp_put;
 
 	adapter = netdev_priv(netdev);
@@ -150,7 +150,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 		return 0;
 
 	adapter = netdev_priv(netdev);
-	if (xid >= IXGBE_FCOE_DDP_MAX) {
+	if (xid >= netdev->fcoe_ddp_xid) {
 		e_warn(drv, "xid=0x%x out-of-range\n", xid);
 		return 0;
 	}
-- 
2.7.3

[PATCH 3.12 10/58] ixgbe: fix broken PFC with X550

[Jiri Slaby]

From: Vasu Dev <vasu.dev@intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit cb78cf12d6e90f57f6e7d090867ef19b6a189dde upstream.

PFC is configuration is skipped for X550 devices due to a incorrect
device id check, fixing that to include X550 PFC configuration.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
index 05e23b80b5e3..a5cc8a674e06 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
@@ -222,13 +222,13 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc)
 	reg |= IXGBE_MFLCN_DPF;
 
 	/*
-	 * X540 supports per TC Rx priority flow control.  So
-	 * clear all TCs and only enable those that should be
+	 * X540 & X550 supports per TC Rx priority flow control.
+	 * So clear all TCs and only enable those that should be
 	 * enabled.
 	 */
 	reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
 
-	if (hw->mac.type == ixgbe_mac_X540)
+	if (hw->mac.type >= ixgbe_mac_X540)
 		reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
 
 	if (pfc_en)
-- 
2.7.3

[PATCH 3.12 11/58] genksyms: Handle string literals with spaces in reference files

[Jiri Slaby]

From: Michal Marek <mmarek@suse.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit a78f70e8d65e88b9f631d073f68cb26dcd746298 upstream.

The reference files use spaces to separate tokens, however, we must
preserve spaces inside string literals. Currently the only case in the
tree is struct edac_raw_error_desc in <linux/edac.h>:

$ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes
$ mv drivers/edac/amd64_edac.{symtypes,symref}
$ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes
drivers/edac/amd64_edac.c:527: warning: amd64_get_dram_hole_info: modversion changed because of changes in struct edac_raw_error_desc

Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 scripts/genksyms/genksyms.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index 88632df4381b..dafaf96e0a34 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -423,13 +423,15 @@ static struct string_list *read_node(FILE *f)
 	struct string_list node = {
 		.string = buffer,
 		.tag = SYM_NORMAL };
-	int c;
+	int c, in_string = 0;
 
 	while ((c = fgetc(f)) != EOF) {
-		if (c == ' ') {
+		if (!in_string && c == ' ') {
 			if (node.string == buffer)
 				continue;
 			break;
+		} else if (c == '"') {
+			in_string = !in_string;
 		} else if (c == '\n') {
 			if (node.string == buffer)
 				return NULL;
-- 
2.7.3

[PATCH 3.12 12/58] cifs: fix out-of-bounds access in lease parsing

[Jiri Slaby]

From: Justin Maggard <jmaggard10@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit deb7deff2f00bdbbcb3d560dad2a89ef37df837d upstream.

When opening a file, SMB2_open() attempts to parse the lease state from the
SMB2 CREATE Response.  However, the parsing code was not careful to ensure
that the create contexts are not empty or invalid, which can lead to out-
of-bounds memory access.  This can be seen easily by trying
to read a file from a OSX 10.11 SMB3 server.  Here is sample crash output:

BUG: unable to handle kernel paging request at ffff8800a1a77cc6
IP: [<ffffffff8828a734>] SMB2_open+0x804/0x960
PGD 8f77067 PUD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 3 PID: 2876 Comm: cp Not tainted 4.5.0-rc3.x86_64.1+ #14
Hardware name: NETGEAR ReadyNAS 314          /ReadyNAS 314          , BIOS 4.6.5 10/11/2012
task: ffff880073cdc080 ti: ffff88005b31c000 task.ti: ffff88005b31c000
RIP: 0010:[<ffffffff8828a734>]  [<ffffffff8828a734>] SMB2_open+0x804/0x960
RSP: 0018:ffff88005b31fa08  EFLAGS: 00010282
RAX: 0000000000000015 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff88007eb8c8b0
RBP: ffff88005b31fad8 R08: 666666203d206363 R09: 6131613030383866
R10: 3030383866666666 R11: 00000000000002b0 R12: ffff8800660fd800
R13: ffff8800a1a77cc2 R14: 00000000424d53fe R15: ffff88005f5a28c0
FS:  00007f7c8a2897c0(0000) GS:ffff88007eb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff8800a1a77cc6 CR3: 000000005b281000 CR4: 00000000000006e0
Stack:
 ffff88005b31fa70 ffffffff88278789 00000000000001d3 ffff88005f5a2a80
 ffffffff00000003 ffff88005d029d00 ffff88006fde05a0 0000000000000000
 ffff88005b31fc78 ffff88006fde0780 ffff88005b31fb2f 0000000100000fe0
Call Trace:
 [<ffffffff88278789>] ? cifsConvertToUTF16+0x159/0x2d0
 [<ffffffff8828cf68>] smb2_open_file+0x98/0x210
 [<ffffffff8811e80c>] ? __kmalloc+0x1c/0xe0
 [<ffffffff882685f4>] cifs_open+0x2a4/0x720
 [<ffffffff88122cef>] do_dentry_open+0x1ff/0x310
 [<ffffffff88268350>] ? cifsFileInfo_get+0x30/0x30
 [<ffffffff88123d92>] vfs_open+0x52/0x60
 [<ffffffff88131dd0>] path_openat+0x170/0xf70
 [<ffffffff88097d48>] ? remove_wait_queue+0x48/0x50
 [<ffffffff88133a29>] do_filp_open+0x79/0xd0
 [<ffffffff8813f2ca>] ? __alloc_fd+0x3a/0x170
 [<ffffffff881240c4>] do_sys_open+0x114/0x1e0
 [<ffffffff881241a9>] SyS_open+0x19/0x20
 [<ffffffff8896e257>] entry_SYSCALL_64_fastpath+0x12/0x6a
Code: 4d 8d 6c 07 04 31 c0 4c 89 ee e8 47 6f e5 ff 31 c9 41 89 ce 44 89 f1 48 c7 c7 28 b1 bd 88 31 c0 49 01 cd 4c 89 ee e8 2b 6f e5 ff <45> 0f b7 75 04 48 c7 c7 31 b1 bd 88 31 c0 4d 01 ee 4c 89 f6 e8
RIP  [<ffffffff8828a734>] SMB2_open+0x804/0x960
 RSP <ffff88005b31fa08>
CR2: ffff8800a1a77cc6
---[ end trace d9f69ba64feee469 ]---

Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/cifs/smb2pdu.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 1bf0ba805ef5..a47ac835145b 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1000,21 +1000,25 @@ parse_lease_state(struct TCP_Server_Info *server, struct smb2_create_rsp *rsp,
 {
 	char *data_offset;
 	struct create_context *cc;
-	unsigned int next = 0;
+	unsigned int next;
+	unsigned int remaining;
 	char *name;
 
 	data_offset = (char *)rsp + 4 + le32_to_cpu(rsp->CreateContextsOffset);
+	remaining = le32_to_cpu(rsp->CreateContextsLength);
 	cc = (struct create_context *)data_offset;
-	do {
-		cc = (struct create_context *)((char *)cc + next);
+	while (remaining >= sizeof(struct create_context)) {
 		name = le16_to_cpu(cc->NameOffset) + (char *)cc;
-		if (le16_to_cpu(cc->NameLength) != 4 ||
-		    strncmp(name, "RqLs", 4)) {
-			next = le32_to_cpu(cc->Next);
-			continue;
-		}
-		return server->ops->parse_lease_buf(cc, epoch);
-	} while (next != 0);
+		if (le16_to_cpu(cc->NameLength) == 4 &&
+		    strncmp(name, "RqLs", 4) == 0)
+			return server->ops->parse_lease_buf(cc, epoch);
+
+		next = le32_to_cpu(cc->Next);
+		if (!next)
+			break;
+		remaining -= next;
+		cc = (struct create_context *)((char *)cc + next);
+	}
 
 	return 0;
 }
-- 
2.7.3

[PATCH 3.12 13/58] CIFS: Fix SMB2+ interim response processing for read requests

[Jiri Slaby]

From: Pavel Shilovsky <pshilovsky@samba.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 6cc3b24235929b54acd5ecc987ef11a425bd209e upstream.

For interim responses we only need to parse a header and update
a number credits. Now it is done for all SMB2+ command except
SMB2_READ which is wrong. Fix this by adding such processing.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/cifs/cifssmb.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index ea938a8bf240..f53a6e8204d8 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1378,11 +1378,10 @@ openRetry:
  * current bigbuf.
  */
 static int
-cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid)
+discard_remaining_data(struct TCP_Server_Info *server)
 {
 	unsigned int rfclen = get_rfc1002_length(server->smallbuf);
 	int remaining = rfclen + 4 - server->total_read;
-	struct cifs_readdata *rdata = mid->callback_data;
 
 	while (remaining > 0) {
 		int length;
@@ -1396,10 +1395,20 @@ cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid)
 		remaining -= length;
 	}
 
-	dequeue_mid(mid, rdata->result);
 	return 0;
 }
 
+static int
+cifs_readv_discard(struct TCP_Server_Info *server, struct mid_q_entry *mid)
+{
+	int length;
+	struct cifs_readdata *rdata = mid->callback_data;
+
+	length = discard_remaining_data(server);
+	dequeue_mid(mid, rdata->result);
+	return length;
+}
+
 int
 cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid)
 {
@@ -1428,6 +1437,12 @@ cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid)
 		return length;
 	server->total_read += length;
 
+	if (server->ops->is_status_pending &&
+	    server->ops->is_status_pending(buf, server, 0)) {
+		discard_remaining_data(server);
+		return -1;
+	}
+
 	/* Was the SMB read successful? */
 	rdata->result = server->ops->map_error(buf, false);
 	if (rdata->result != 0) {
-- 
2.7.3

[PATCH 3.12 14/58] iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered

[Jiri Slaby]

From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 38e45d02ea9f194b89d6bf41e52ccafc8e2c2b47 upstream.

The setup code for the performance counters in the AMD IOMMU driver
tests whether the counters can be written. It tests to setup a counter
for device 00:00.0, which fails on systems where this particular device
is not covered by the IOMMU.

Fix this by not relying on device 00:00.0 but only on the IOMMU being
present.

Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/iommu/amd_iommu_init.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 8f798be6e398..9afa397df661 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -227,6 +227,10 @@ static enum iommu_init_state init_state = IOMMU_START_STATE;
 static int amd_iommu_enable_interrupts(void);
 static int __init iommu_go_to_state(enum iommu_init_state state);
 
+static int iommu_pc_get_set_reg_val(struct amd_iommu *iommu,
+				    u8 bank, u8 cntr, u8 fxn,
+				    u64 *value, bool is_write);
+
 static inline void update_last_devid(u16 devid)
 {
 	if (devid > amd_iommu_last_bdf)
@@ -1183,8 +1187,8 @@ static void init_iommu_perf_ctr(struct amd_iommu *iommu)
 	amd_iommu_pc_present = true;
 
 	/* Check if the performance counters can be written to */
-	if ((0 != amd_iommu_pc_get_set_reg_val(0, 0, 0, 0, &val, true)) ||
-	    (0 != amd_iommu_pc_get_set_reg_val(0, 0, 0, 0, &val2, false)) ||
+	if ((0 != iommu_pc_get_set_reg_val(iommu, 0, 0, 0, &val, true)) ||
+	    (0 != iommu_pc_get_set_reg_val(iommu, 0, 0, 0, &val2, false)) ||
 	    (val != val2)) {
 		pr_err("AMD-Vi: Unable to write to IOMMU perf counter.\n");
 		amd_iommu_pc_present = false;
@@ -2315,22 +2319,15 @@ u8 amd_iommu_pc_get_max_counters(u16 devid)
 }
 EXPORT_SYMBOL(amd_iommu_pc_get_max_counters);
 
-int amd_iommu_pc_get_set_reg_val(u16 devid, u8 bank, u8 cntr, u8 fxn,
+static int iommu_pc_get_set_reg_val(struct amd_iommu *iommu,
+				    u8 bank, u8 cntr, u8 fxn,
 				    u64 *value, bool is_write)
 {
-	struct amd_iommu *iommu;
 	u32 offset;
 	u32 max_offset_lim;
 
-	/* Make sure the IOMMU PC resource is available */
-	if (!amd_iommu_pc_present)
-		return -ENODEV;
-
-	/* Locate the iommu associated with the device ID */
-	iommu = amd_iommu_rlookup_table[devid];
-
 	/* Check for valid iommu and pc register indexing */
-	if (WARN_ON((iommu == NULL) || (fxn > 0x28) || (fxn & 7)))
+	if (WARN_ON((fxn > 0x28) || (fxn & 7)))
 		return -ENODEV;
 
 	offset = (u32)(((0x40|bank) << 12) | (cntr << 8) | fxn);
@@ -2354,3 +2351,16 @@ int amd_iommu_pc_get_set_reg_val(u16 devid, u8 bank, u8 cntr, u8 fxn,
 	return 0;
 }
 EXPORT_SYMBOL(amd_iommu_pc_get_set_reg_val);
+
+int amd_iommu_pc_get_set_reg_val(u16 devid, u8 bank, u8 cntr, u8 fxn,
+				    u64 *value, bool is_write)
+{
+	struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+
+	/* Make sure the IOMMU PC resource is available */
+	if (!amd_iommu_pc_present || iommu == NULL)
+		return -ENODEV;
+
+	return iommu_pc_get_set_reg_val(iommu, bank, cntr, fxn,
+					value, is_write);
+}
-- 
2.7.3

[PATCH 3.12 15/58] x86/entry/compat: Add missing CLAC to entry_INT80_32

[Jiri Slaby]

From: Andy Lutomirski <luto@kernel.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 3d44d51bd339766f0178f0cf2e8d048b4a4872aa upstream.

This doesn't seem to fix a regression -- I don't think the CLAC was
ever there.

I double-checked in a debugger: entries through the int80 gate do
not automatically clear AC.

Stable maintainers: I can provide a backport to 4.3 and earlier if
needed.  This needs to be backported all the way to 3.10.

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 63bcff2a307b ("x86, smap: Add STAC and CLAC instructions to control user space access")
Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ kamal: backport to 3.10 through 3.19-stable: file rename; context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/x86/ia32/ia32entry.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 92a2e9333620..b74ac9c5710b 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -422,6 +422,7 @@ ENTRY(ia32_syscall)
 	/*CFI_REL_OFFSET	cs,CS-RIP*/
 	CFI_REL_OFFSET	rip,RIP-RIP
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	ASM_CLAC			/* Do this early to minimize exposure */
 	SWAPGS
 	/*
 	 * No need to follow this irqs on/off section: the syscall
-- 
2.7.3

[PATCH 3.12 16/58] drm/ast: Fix incorrect register check for DRAM width

[Jiri Slaby]

From: Timothy Pearson <tpearson@raptorengineeringinc.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 2d02b8bdba322b527c5f5168ce1ca10c2d982a78 upstream.

During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.

Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.

Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/gpu/drm/ast/ast_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index 48f7ad1497c2..88fc3a5fa7c4 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -124,7 +124,7 @@ static int ast_get_dram_info(struct drm_device *dev)
 	} while (ast_read32(ast, 0x10000) != 0x01);
 	data = ast_read32(ast, 0x10004);
 
-	if (data & 0x400)
+	if (data & 0x40)
 		ast->dram_bus_width = 16;
 	else
 		ast->dram_bus_width = 32;
-- 
2.7.3

[PATCH 3.12 17/58] libata: fix HDIO_GET_32BIT ioctl

[Jiri Slaby]

From: Arnd Bergmann <arnd@arndb.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 287e6611ab1eac76c2c5ebf6e345e04c80ca9c61 upstream.

As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
work correctly in compat mode with libata.

I have investigated the issue further and found multiple problems
that all appeared with the same commit that originally introduced
HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy
a 'long' variable containing either 0 or 1 to user space.

The problems with this are:

* On big-endian machines, this will always write a zero because it
  stores the wrong byte into user space.

* In compat mode, the upper three bytes of the variable are updated
  by the compat_hdio_ioctl() function, but they now contain
  uninitialized stack data.

* The hdparm tool calling this ioctl uses a 'static long' variable
  to store the result. This means at least the upper bytes are
  initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT
  would fill them with data that remains stale when the low byte
  is overwritten. Fortunately libata doesn't implement any of the
  affected ioctl commands, so this would only happen when we query
  both an IDE and an ATA device in the same command such as
  "hdparm -N -c /dev/hda /dev/sda"

* The libata code for unknown reasons started using ATA_IOC_GET_IO32
  and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT,
  while the ioctl commands that were added later use the normal
  HDIO_* names. This is harmless but rather confusing.

This addresses all four issues by changing the code to use put_user()
on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem
does, and by clarifying the names of the ioctl commands.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Soohoon Lee <Soohoon.Lee@f5.com>
Tested-by: Soohoon Lee <Soohoon.Lee@f5.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/ata/libata-scsi.c | 11 +++++------
 include/linux/ata.h       |  4 ++--
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 6fecf0bde105..1e82d2a1e205 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -674,19 +674,18 @@ static int ata_ioc32(struct ata_port *ap)
 int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
 		     int cmd, void __user *arg)
 {
-	int val = -EINVAL, rc = -EINVAL;
+	unsigned long val;
+	int rc = -EINVAL;
 	unsigned long flags;
 
 	switch (cmd) {
-	case ATA_IOC_GET_IO32:
+	case HDIO_GET_32BIT:
 		spin_lock_irqsave(ap->lock, flags);
 		val = ata_ioc32(ap);
 		spin_unlock_irqrestore(ap->lock, flags);
-		if (copy_to_user(arg, &val, 1))
-			return -EFAULT;
-		return 0;
+		return put_user(val, (unsigned long __user *)arg);
 
-	case ATA_IOC_SET_IO32:
+	case HDIO_SET_32BIT:
 		val = (unsigned long) arg;
 		rc = 0;
 		spin_lock_irqsave(ap->lock, flags);
diff --git a/include/linux/ata.h b/include/linux/ata.h
index bf4c69ca76df..72588a69b916 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -477,8 +477,8 @@ enum ata_tf_protocols {
 };
 
 enum ata_ioctls {
-	ATA_IOC_GET_IO32	= 0x309,
-	ATA_IOC_SET_IO32	= 0x324,
+	ATA_IOC_GET_IO32	= 0x309, /* HDIO_GET_32BIT */
+	ATA_IOC_SET_IO32	= 0x324, /* HDIO_SET_32BIT */
 };
 
 /* core structures */
-- 
2.7.3

[PATCH 3.12 18/58] libata: Align ata_device's id on a cacheline

[Jiri Slaby]

From: Harvey Hunt <harvey.hunt@imgtec.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 4ee34ea3a12396f35b26d90a094c75db95080baa upstream.

The id buffer in ata_device is a DMA target, but it isn't explicitly
cacheline aligned. Due to this, adjacent fields can be overwritten with
stale data from memory on non coherent architectures. As a result, the
kernel is sometimes unable to communicate with an ATA device.

Fix this by ensuring that the id buffer is cacheline aligned.

This issue is similar to that fixed by Commit 84bda12af31f
("libata: align ap->sector_buf").

Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/linux/libata.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/libata.h b/include/linux/libata.h
index 189c9ff97b29..a445209be917 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -712,7 +712,7 @@ struct ata_device {
 	union {
 		u16		id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
 		u32		gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
-	};
+	} ____cacheline_aligned;
 
 	/* DEVSLP Timing Variables from Identify Device Data Log */
 	u8			devslp_timing[ATA_LOG_DEVSLP_SIZE];
-- 
2.7.3

[PATCH 3.12 19/58] PM / sleep / x86: Fix crash on graph trace through x86 suspend

[Jiri Slaby]

From: Todd E Brandt <todd.e.brandt@linux.intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 92f9e179a702a6adbc11e2fedc76ecd6ffc9e3f7 upstream.

Pause/unpause graph tracing around do_suspend_lowlevel as it has
inconsistent call/return info after it jumps to the wakeup vector.
The graph trace buffer will otherwise become misaligned and
may eventually crash and hang on suspend.

To reproduce the issue and test the fix:
Run a function_graph trace over suspend/resume and set the graph
function to suspend_devices_and_enter. This consistently hangs the
system without this fix.

Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/x86/kernel/acpi/sleep.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 33120100ff5e..06bd995071de 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -16,6 +16,7 @@
 #include <asm/cacheflush.h>
 #include <asm/realmode.h>
 
+#include <linux/ftrace.h>
 #include "../../realmode/rm/wakeup.h"
 #include "sleep.h"
 
@@ -96,7 +97,13 @@ int x86_acpi_suspend_lowlevel(void)
        saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
+	/*
+	 * Pause/unpause graph tracing around do_suspend_lowlevel as it has
+	 * inconsistent call/return info after it jumps to the wakeup vector.
+	 */
+	pause_graph_tracing();
 	do_suspend_lowlevel();
+	unpause_graph_tracing();
 	return 0;
 }
 
-- 
2.7.3

[PATCH 3.12 20/58] Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"

[Jiri Slaby]

From: Thomas Betker <thomas.betker@rohde-schwarz.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 157078f64b8a9cd7011b6b900b2f2498df850748 upstream.

This reverts commit 5ffd3412ae55
("jffs2: Fix lock acquisition order bug in jffs2_write_begin").

The commit modified jffs2_write_begin() to remove a deadlock with
jffs2_garbage_collect_live(), but this introduced new deadlocks found
by multiple users. page_lock() actually has to be called before
mutex_lock(&c->alloc_sem) or mutex_lock(&f->sem) because
jffs2_write_end() and jffs2_readpage() are called with the page locked,
and they acquire c->alloc_sem and f->sem, resp.

In other words, the lock order in jffs2_write_begin() was correct, and
it is the jffs2_garbage_collect_live() path that has to be changed.

Revert the commit to get rid of the new deadlocks, and to clear the way
for a better fix of the original deadlock.

Reported-by: Deng Chao <deng.chao1@zte.com.cn>
Reported-by: Ming Liu <liu.ming50@gmail.com>
Reported-by: wangzaiwei <wangzaiwei@top-vision.cn>
Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/jffs2/file.c | 39 ++++++++++++++++++---------------------
 1 file changed, 18 insertions(+), 21 deletions(-)

diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 1506673c087e..60ef3fb707ff 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -138,39 +138,33 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 	struct page *pg;
 	struct inode *inode = mapping->host;
 	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
-	struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
-	struct jffs2_raw_inode ri;
-	uint32_t alloc_len = 0;
 	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
 	uint32_t pageofs = index << PAGE_CACHE_SHIFT;
 	int ret = 0;
 
-	jffs2_dbg(1, "%s()\n", __func__);
-
-	if (pageofs > inode->i_size) {
-		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
-					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
-		if (ret)
-			return ret;
-	}
-
-	mutex_lock(&f->sem);
 	pg = grab_cache_page_write_begin(mapping, index, flags);
-	if (!pg) {
-		if (alloc_len)
-			jffs2_complete_reservation(c);
-		mutex_unlock(&f->sem);
+	if (!pg)
 		return -ENOMEM;
-	}
 	*pagep = pg;
 
-	if (alloc_len) {
+	jffs2_dbg(1, "%s()\n", __func__);
+
+	if (pageofs > inode->i_size) {
 		/* Make new hole frag from old EOF to new page */
+		struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
+		struct jffs2_raw_inode ri;
 		struct jffs2_full_dnode *fn;
+		uint32_t alloc_len;
 
 		jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n",
 			  (unsigned int)inode->i_size, pageofs);
 
+		ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
+					  ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
+		if (ret)
+			goto out_page;
+
+		mutex_lock(&f->sem);
 		memset(&ri, 0, sizeof(ri));
 
 		ri.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
@@ -197,6 +191,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 		if (IS_ERR(fn)) {
 			ret = PTR_ERR(fn);
 			jffs2_complete_reservation(c);
+			mutex_unlock(&f->sem);
 			goto out_page;
 		}
 		ret = jffs2_add_full_dnode_to_inode(c, f, fn);
@@ -211,10 +206,12 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 			jffs2_mark_node_obsolete(c, fn->raw);
 			jffs2_free_full_dnode(fn);
 			jffs2_complete_reservation(c);
+			mutex_unlock(&f->sem);
 			goto out_page;
 		}
 		jffs2_complete_reservation(c);
 		inode->i_size = pageofs;
+		mutex_unlock(&f->sem);
 	}
 
 	/*
@@ -223,18 +220,18 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
 	 * case of a short-copy.
 	 */
 	if (!PageUptodate(pg)) {
+		mutex_lock(&f->sem);
 		ret = jffs2_do_readpage_nolock(inode, pg);
+		mutex_unlock(&f->sem);
 		if (ret)
 			goto out_page;
 	}
-	mutex_unlock(&f->sem);
 	jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
 	return ret;
 
 out_page:
 	unlock_page(pg);
 	page_cache_release(pg);
-	mutex_unlock(&f->sem);
 	return ret;
 }
 
-- 
2.7.3

[PATCH 3.12 21/58] jffs2: Fix page lock / f->sem deadlock

[Jiri Slaby]

From: David Woodhouse <David.Woodhouse@intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 49e91e7079febe59a20ca885a87dd1c54240d0f1 upstream.

With this fix, all code paths should now be obtaining the page lock before
f->sem.

Reported-by: Szabó Tamás <sztomi89@gmail.com>
Tested-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/jffs2/README.Locking |  5 +----
 fs/jffs2/gc.c           | 17 ++++++++++-------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/fs/jffs2/README.Locking b/fs/jffs2/README.Locking
index 3ea36554107f..8918ac905a3b 100644
--- a/fs/jffs2/README.Locking
+++ b/fs/jffs2/README.Locking
@@ -2,10 +2,6 @@
 	JFFS2 LOCKING DOCUMENTATION
 	---------------------------
 
-At least theoretically, JFFS2 does not require the Big Kernel Lock
-(BKL), which was always helpfully obtained for it by Linux 2.4 VFS
-code. It has its own locking, as described below.
-
 This document attempts to describe the existing locking rules for
 JFFS2. It is not expected to remain perfectly up to date, but ought to
 be fairly close.
@@ -69,6 +65,7 @@ Ordering constraints:
 	   any f->sem held.
 	2. Never attempt to lock two file mutexes in one thread.
 	   No ordering rules have been made for doing so.
+	3. Never lock a page cache page with f->sem held.
 
 
 	erase_completion_lock spinlock
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 5a2dec2b064c..95d5880a63ee 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -1296,14 +1296,17 @@ static int jffs2_garbage_collect_dnode(struct jffs2_sb_info *c, struct jffs2_era
 		BUG_ON(start > orig_start);
 	}
 
-	/* First, use readpage() to read the appropriate page into the page cache */
-	/* Q: What happens if we actually try to GC the _same_ page for which commit_write()
-	 *    triggered garbage collection in the first place?
-	 * A: I _think_ it's OK. read_cache_page shouldn't deadlock, we'll write out the
-	 *    page OK. We'll actually write it out again in commit_write, which is a little
-	 *    suboptimal, but at least we're correct.
-	 */
+	/* The rules state that we must obtain the page lock *before* f->sem, so
+	 * drop f->sem temporarily. Since we also hold c->alloc_sem, nothing's
+	 * actually going to *change* so we're safe; we only allow reading.
+	 *
+	 * It is important to note that jffs2_write_begin() will ensure that its
+	 * page is marked Uptodate before allocating space. That means that if we
+	 * end up here trying to GC the *same* page that jffs2_write_begin() is
+	 * trying to write out, read_cache_page() will not deadlock. */
+	mutex_unlock(&f->sem);
 	pg_ptr = jffs2_gc_fetch_page(c, f, start, &pg);
+	mutex_lock(&f->sem);
 
 	if (IS_ERR(pg_ptr)) {
 		pr_warn("read_cache_page() returned error: %ld\n",
-- 
2.7.3

[PATCH 3.12 22/58] Fix directory hardlinks from deleted directories

[Jiri Slaby]

From: David Woodhouse <David.Woodhouse@intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit be629c62a603e5935f8177fd8a19e014100a259e upstream.

When a directory is deleted, we don't take too much care about killing off
all the dirents that belong to it — on the basis that on remount, the scan
will conclude that the directory is dead anyway.

This doesn't work though, when the deleted directory contained a child
directory which was moved *out*. In the early stages of the fs build
we can then end up with an apparent hard link, with the child directory
appearing both in its true location, and as a child of the original
directory which are this stage of the mount process we don't *yet* know
is defunct.

To resolve this, take out the early special-casing of the "directories
shall not have hard links" rule in jffs2_build_inode_pass1(), and let the
normal nlink processing happen for directories as well as other inodes.

Then later in the build process we can set ic->pino_nlink to the parent
inode#, as is required for directories during normal operaton, instead
of the nlink. And complain only *then* about hard links which are still
in evidence even after killing off all the unreachable paths.

Reported-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 fs/jffs2/build.c    | 75 ++++++++++++++++++++++++++++++++++++++++-------------
 fs/jffs2/nodelist.h |  6 ++++-
 2 files changed, 62 insertions(+), 19 deletions(-)

diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
index a3750f902adc..c1f04947d7dc 100644
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -49,7 +49,8 @@ next_inode(int *i, struct jffs2_inode_cache *ic, struct jffs2_sb_info *c)
 
 
 static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
-				    struct jffs2_inode_cache *ic)
+				    struct jffs2_inode_cache *ic,
+				    int *dir_hardlinks)
 {
 	struct jffs2_full_dirent *fd;
 
@@ -68,19 +69,21 @@ static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
 			dbg_fsbuild("child \"%s\" (ino #%u) of dir ino #%u doesn't exist!\n",
 				  fd->name, fd->ino, ic->ino);
 			jffs2_mark_node_obsolete(c, fd->raw);
+			/* Clear the ic/raw union so it doesn't cause problems later. */
+			fd->ic = NULL;
 			continue;
 		}
 
+		/* From this point, fd->raw is no longer used so we can set fd->ic */
+		fd->ic = child_ic;
+		child_ic->pino_nlink++;
+		/* If we appear (at this stage) to have hard-linked directories,
+		 * set a flag to trigger a scan later */
 		if (fd->type == DT_DIR) {
-			if (child_ic->pino_nlink) {
-				JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u appears to be a hard link\n",
-					    fd->name, fd->ino, ic->ino);
-				/* TODO: What do we do about it? */
-			} else {
-				child_ic->pino_nlink = ic->ino;
-			}
-		} else
-			child_ic->pino_nlink++;
+			child_ic->flags |= INO_FLAGS_IS_DIR;
+			if (child_ic->pino_nlink > 1)
+				*dir_hardlinks = 1;
+		}
 
 		dbg_fsbuild("increased nlink for child \"%s\" (ino #%u)\n", fd->name, fd->ino);
 		/* Can't free scan_dents so far. We might need them in pass 2 */
@@ -94,8 +97,7 @@ static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
 */
 static int jffs2_build_filesystem(struct jffs2_sb_info *c)
 {
-	int ret;
-	int i;
+	int ret, i, dir_hardlinks = 0;
 	struct jffs2_inode_cache *ic;
 	struct jffs2_full_dirent *fd;
 	struct jffs2_full_dirent *dead_fds = NULL;
@@ -119,7 +121,7 @@ static int jffs2_build_filesystem(struct jffs2_sb_info *c)
 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
 	for_each_inode(i, c, ic) {
 		if (ic->scan_dents) {
-			jffs2_build_inode_pass1(c, ic);
+			jffs2_build_inode_pass1(c, ic, &dir_hardlinks);
 			cond_resched();
 		}
 	}
@@ -155,6 +157,20 @@ static int jffs2_build_filesystem(struct jffs2_sb_info *c)
 	}
 
 	dbg_fsbuild("pass 2a complete\n");
+
+	if (dir_hardlinks) {
+		/* If we detected directory hardlinks earlier, *hopefully*
+		 * they are gone now because some of the links were from
+		 * dead directories which still had some old dirents lying
+		 * around and not yet garbage-collected, but which have
+		 * been discarded above. So clear the pino_nlink field
+		 * in each directory, so that the final scan below can
+		 * print appropriate warnings. */
+		for_each_inode(i, c, ic) {
+			if (ic->flags & INO_FLAGS_IS_DIR)
+				ic->pino_nlink = 0;
+		}
+	}
 	dbg_fsbuild("freeing temporary data structures\n");
 
 	/* Finally, we can scan again and free the dirent structs */
@@ -162,6 +178,33 @@ static int jffs2_build_filesystem(struct jffs2_sb_info *c)
 		while(ic->scan_dents) {
 			fd = ic->scan_dents;
 			ic->scan_dents = fd->next;
+			/* We do use the pino_nlink field to count nlink of
+			 * directories during fs build, so set it to the
+			 * parent ino# now. Now that there's hopefully only
+			 * one. */
+			if (fd->type == DT_DIR) {
+				if (!fd->ic) {
+					/* We'll have complained about it and marked the coresponding
+					   raw node obsolete already. Just skip it. */
+					continue;
+				}
+
+				/* We *have* to have set this in jffs2_build_inode_pass1() */
+				BUG_ON(!(fd->ic->flags & INO_FLAGS_IS_DIR));
+
+				/* We clear ic->pino_nlink ∀ directories' ic *only* if dir_hardlinks
+				 * is set. Otherwise, we know this should never trigger anyway, so
+				 * we don't do the check. And ic->pino_nlink still contains the nlink
+				 * value (which is 1). */
+				if (dir_hardlinks && fd->ic->pino_nlink) {
+					JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u is also hard linked from dir ino #%u\n",
+						    fd->name, fd->ino, ic->ino, fd->ic->pino_nlink);
+					/* Should we unlink it from its previous parent? */
+				}
+
+				/* For directories, ic->pino_nlink holds that parent inode # */
+				fd->ic->pino_nlink = ic->ino;
+			}
 			jffs2_free_full_dirent(fd);
 		}
 		ic->scan_dents = NULL;
@@ -240,11 +283,7 @@ static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *c,
 
 			/* Reduce nlink of the child. If it's now zero, stick it on the
 			   dead_fds list to be cleaned up later. Else just free the fd */
-
-			if (fd->type == DT_DIR)
-				child_ic->pino_nlink = 0;
-			else
-				child_ic->pino_nlink--;
+			child_ic->pino_nlink--;
 
 			if (!child_ic->pino_nlink) {
 				dbg_fsbuild("inode #%u (\"%s\") now has no links; adding to dead_fds list.\n",
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
index fa35ff79ab35..0637271f3770 100644
--- a/fs/jffs2/nodelist.h
+++ b/fs/jffs2/nodelist.h
@@ -194,6 +194,7 @@ struct jffs2_inode_cache {
 #define INO_STATE_CLEARING	6	/* In clear_inode() */
 
 #define INO_FLAGS_XATTR_CHECKED	0x01	/* has no duplicate xattr_ref */
+#define INO_FLAGS_IS_DIR	0x02	/* is a directory */
 
 #define RAWNODE_CLASS_INODE_CACHE	0
 #define RAWNODE_CLASS_XATTR_DATUM	1
@@ -249,7 +250,10 @@ struct jffs2_readinode_info
 
 struct jffs2_full_dirent
 {
-	struct jffs2_raw_node_ref *raw;
+	union {
+		struct jffs2_raw_node_ref *raw;
+		struct jffs2_inode_cache *ic; /* Just during part of build */
+	};
 	struct jffs2_full_dirent *next;
 	uint32_t version;
 	uint32_t ino; /* == zero for unlink */
-- 
2.7.3

[PATCH 3.12 23/58] ALSA: ctl: Fix ioctls for X32 ABI

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 6236d8bb2afcfe71b88ecea554e0dc638090a45f upstream.

The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32.  Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array.  This ends up with the
unknown ioctl (ENOTTY) error.

The fix is to add the compat entries for the new aligned struct.

Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/core/control_compat.c | 90 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 74 insertions(+), 16 deletions(-)

diff --git a/sound/core/control_compat.c b/sound/core/control_compat.c
index 2bb95a7a8809..c14565bde887 100644
--- a/sound/core/control_compat.c
+++ b/sound/core/control_compat.c
@@ -170,6 +170,19 @@ struct snd_ctl_elem_value32 {
         unsigned char reserved[128];
 };
 
+#ifdef CONFIG_X86_X32
+/* x32 has a different alignment for 64bit values from ia32 */
+struct snd_ctl_elem_value_x32 {
+	struct snd_ctl_elem_id id;
+	unsigned int indirect;	/* bit-field causes misalignment */
+	union {
+		s32 integer[128];
+		unsigned char data[512];
+		s64 integer64[64];
+	} value;
+	unsigned char reserved[128];
+};
+#endif /* CONFIG_X86_X32 */
 
 /* get the value type and count of the control */
 static int get_ctl_type(struct snd_card *card, struct snd_ctl_elem_id *id,
@@ -219,9 +232,11 @@ static int get_elem_size(int type, int count)
 
 static int copy_ctl_value_from_user(struct snd_card *card,
 				    struct snd_ctl_elem_value *data,
-				    struct snd_ctl_elem_value32 __user *data32,
+				    void __user *userdata,
+				    void __user *valuep,
 				    int *typep, int *countp)
 {
+	struct snd_ctl_elem_value32 __user *data32 = userdata;
 	int i, type, size;
 	int uninitialized_var(count);
 	unsigned int indirect;
@@ -239,8 +254,9 @@ static int copy_ctl_value_from_user(struct snd_card *card,
 	if (type == SNDRV_CTL_ELEM_TYPE_BOOLEAN ||
 	    type == SNDRV_CTL_ELEM_TYPE_INTEGER) {
 		for (i = 0; i < count; i++) {
+			s32 __user *intp = valuep;
 			int val;
-			if (get_user(val, &data32->value.integer[i]))
+			if (get_user(val, &intp[i]))
 				return -EFAULT;
 			data->value.integer.value[i] = val;
 		}
@@ -250,8 +266,7 @@ static int copy_ctl_value_from_user(struct snd_card *card,
 			printk(KERN_ERR "snd_ioctl32_ctl_elem_value: unknown type %d\n", type);
 			return -EINVAL;
 		}
-		if (copy_from_user(data->value.bytes.data,
-				   data32->value.data, size))
+		if (copy_from_user(data->value.bytes.data, valuep, size))
 			return -EFAULT;
 	}
 
@@ -261,7 +276,8 @@ static int copy_ctl_value_from_user(struct snd_card *card,
 }
 
 /* restore the value to 32bit */
-static int copy_ctl_value_to_user(struct snd_ctl_elem_value32 __user *data32,
+static int copy_ctl_value_to_user(void __user *userdata,
+				  void __user *valuep,
 				  struct snd_ctl_elem_value *data,
 				  int type, int count)
 {
@@ -270,22 +286,22 @@ static int copy_ctl_value_to_user(struct snd_ctl_elem_value32 __user *data32,
 	if (type == SNDRV_CTL_ELEM_TYPE_BOOLEAN ||
 	    type == SNDRV_CTL_ELEM_TYPE_INTEGER) {
 		for (i = 0; i < count; i++) {
+			s32 __user *intp = valuep;
 			int val;
 			val = data->value.integer.value[i];
-			if (put_user(val, &data32->value.integer[i]))
+			if (put_user(val, &intp[i]))
 				return -EFAULT;
 		}
 	} else {
 		size = get_elem_size(type, count);
-		if (copy_to_user(data32->value.data,
-				 data->value.bytes.data, size))
+		if (copy_to_user(valuep, data->value.bytes.data, size))
 			return -EFAULT;
 	}
 	return 0;
 }
 
-static int snd_ctl_elem_read_user_compat(struct snd_card *card, 
-					 struct snd_ctl_elem_value32 __user *data32)
+static int ctl_elem_read_user(struct snd_card *card,
+			      void __user *userdata, void __user *valuep)
 {
 	struct snd_ctl_elem_value *data;
 	int err, type, count;
@@ -294,7 +310,9 @@ static int snd_ctl_elem_read_user_compat(struct snd_card *card,
 	if (data == NULL)
 		return -ENOMEM;
 
-	if ((err = copy_ctl_value_from_user(card, data, data32, &type, &count)) < 0)
+	err = copy_ctl_value_from_user(card, data, userdata, valuep,
+				       &type, &count);
+	if (err < 0)
 		goto error;
 
 	snd_power_lock(card);
@@ -303,14 +321,15 @@ static int snd_ctl_elem_read_user_compat(struct snd_card *card,
 		err = snd_ctl_elem_read(card, data);
 	snd_power_unlock(card);
 	if (err >= 0)
-		err = copy_ctl_value_to_user(data32, data, type, count);
+		err = copy_ctl_value_to_user(userdata, valuep, data,
+					     type, count);
  error:
 	kfree(data);
 	return err;
 }
 
-static int snd_ctl_elem_write_user_compat(struct snd_ctl_file *file,
-					  struct snd_ctl_elem_value32 __user *data32)
+static int ctl_elem_write_user(struct snd_ctl_file *file,
+			       void __user *userdata, void __user *valuep)
 {
 	struct snd_ctl_elem_value *data;
 	struct snd_card *card = file->card;
@@ -320,7 +339,9 @@ static int snd_ctl_elem_write_user_compat(struct snd_ctl_file *file,
 	if (data == NULL)
 		return -ENOMEM;
 
-	if ((err = copy_ctl_value_from_user(card, data, data32, &type, &count)) < 0)
+	err = copy_ctl_value_from_user(card, data, userdata, valuep,
+				       &type, &count);
+	if (err < 0)
 		goto error;
 
 	snd_power_lock(card);
@@ -329,12 +350,39 @@ static int snd_ctl_elem_write_user_compat(struct snd_ctl_file *file,
 		err = snd_ctl_elem_write(card, file, data);
 	snd_power_unlock(card);
 	if (err >= 0)
-		err = copy_ctl_value_to_user(data32, data, type, count);
+		err = copy_ctl_value_to_user(userdata, valuep, data,
+					     type, count);
  error:
 	kfree(data);
 	return err;
 }
 
+static int snd_ctl_elem_read_user_compat(struct snd_card *card,
+					 struct snd_ctl_elem_value32 __user *data32)
+{
+	return ctl_elem_read_user(card, data32, &data32->value);
+}
+
+static int snd_ctl_elem_write_user_compat(struct snd_ctl_file *file,
+					  struct snd_ctl_elem_value32 __user *data32)
+{
+	return ctl_elem_write_user(file, data32, &data32->value);
+}
+
+#ifdef CONFIG_X86_X32
+static int snd_ctl_elem_read_user_x32(struct snd_card *card,
+				      struct snd_ctl_elem_value_x32 __user *data32)
+{
+	return ctl_elem_read_user(card, data32, &data32->value);
+}
+
+static int snd_ctl_elem_write_user_x32(struct snd_ctl_file *file,
+				       struct snd_ctl_elem_value_x32 __user *data32)
+{
+	return ctl_elem_write_user(file, data32, &data32->value);
+}
+#endif /* CONFIG_X86_X32 */
+
 /* add or replace a user control */
 static int snd_ctl_elem_add_compat(struct snd_ctl_file *file,
 				   struct snd_ctl_elem_info32 __user *data32,
@@ -393,6 +441,10 @@ enum {
 	SNDRV_CTL_IOCTL_ELEM_WRITE32 = _IOWR('U', 0x13, struct snd_ctl_elem_value32),
 	SNDRV_CTL_IOCTL_ELEM_ADD32 = _IOWR('U', 0x17, struct snd_ctl_elem_info32),
 	SNDRV_CTL_IOCTL_ELEM_REPLACE32 = _IOWR('U', 0x18, struct snd_ctl_elem_info32),
+#ifdef CONFIG_X86_X32
+	SNDRV_CTL_IOCTL_ELEM_READ_X32 = _IOWR('U', 0x12, struct snd_ctl_elem_value_x32),
+	SNDRV_CTL_IOCTL_ELEM_WRITE_X32 = _IOWR('U', 0x13, struct snd_ctl_elem_value_x32),
+#endif /* CONFIG_X86_X32 */
 };
 
 static inline long snd_ctl_ioctl_compat(struct file *file, unsigned int cmd, unsigned long arg)
@@ -431,6 +483,12 @@ static inline long snd_ctl_ioctl_compat(struct file *file, unsigned int cmd, uns
 		return snd_ctl_elem_add_compat(ctl, argp, 0);
 	case SNDRV_CTL_IOCTL_ELEM_REPLACE32:
 		return snd_ctl_elem_add_compat(ctl, argp, 1);
+#ifdef CONFIG_X86_X32
+	case SNDRV_CTL_IOCTL_ELEM_READ_X32:
+		return snd_ctl_elem_read_user_x32(ctl->card, argp);
+	case SNDRV_CTL_IOCTL_ELEM_WRITE_X32:
+		return snd_ctl_elem_write_user_x32(ctl, argp);
+#endif /* CONFIG_X86_X32 */
 	}
 
 	down_read(&snd_ioctl_rwsem);
-- 
2.7.3

[PATCH 3.12 24/58] ALSA: rawmidi: Fix ioctls X32 ABI

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 2251fbbc1539f05b0b206b37a602d5776be37252 upstream.

Like the previous fixes for ctl and PCM, we need a fix for
incompatible X32 ABI regarding the rawmidi: namely, struct
snd_rawmidi_status has the timespec, and the size and the alignment on
X32 differ from IA32.

This patch fixes the incompatible ioctl for X32.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/core/rawmidi_compat.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/sound/core/rawmidi_compat.c b/sound/core/rawmidi_compat.c
index 5268c1f58c25..09a89094dcf7 100644
--- a/sound/core/rawmidi_compat.c
+++ b/sound/core/rawmidi_compat.c
@@ -94,9 +94,58 @@ static int snd_rawmidi_ioctl_status_compat(struct snd_rawmidi_file *rfile,
 	return 0;
 }
 
+#ifdef CONFIG_X86_X32
+/* X32 ABI has 64bit timespec and 64bit alignment */
+struct snd_rawmidi_status_x32 {
+	s32 stream;
+	u32 rsvd; /* alignment */
+	struct timespec tstamp;
+	u32 avail;
+	u32 xruns;
+	unsigned char reserved[16];
+} __attribute__((packed));
+
+#define put_timespec(src, dst) copy_to_user(dst, src, sizeof(*dst))
+
+static int snd_rawmidi_ioctl_status_x32(struct snd_rawmidi_file *rfile,
+					struct snd_rawmidi_status_x32 __user *src)
+{
+	int err;
+	struct snd_rawmidi_status status;
+
+	if (rfile->output == NULL)
+		return -EINVAL;
+	if (get_user(status.stream, &src->stream))
+		return -EFAULT;
+
+	switch (status.stream) {
+	case SNDRV_RAWMIDI_STREAM_OUTPUT:
+		err = snd_rawmidi_output_status(rfile->output, &status);
+		break;
+	case SNDRV_RAWMIDI_STREAM_INPUT:
+		err = snd_rawmidi_input_status(rfile->input, &status);
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (err < 0)
+		return err;
+
+	if (put_timespec(&status.tstamp, &src->tstamp) ||
+	    put_user(status.avail, &src->avail) ||
+	    put_user(status.xruns, &src->xruns))
+		return -EFAULT;
+
+	return 0;
+}
+#endif /* CONFIG_X86_X32 */
+
 enum {
 	SNDRV_RAWMIDI_IOCTL_PARAMS32 = _IOWR('W', 0x10, struct snd_rawmidi_params32),
 	SNDRV_RAWMIDI_IOCTL_STATUS32 = _IOWR('W', 0x20, struct snd_rawmidi_status32),
+#ifdef CONFIG_X86_X32
+	SNDRV_RAWMIDI_IOCTL_STATUS_X32 = _IOWR('W', 0x20, struct snd_rawmidi_status_x32),
+#endif /* CONFIG_X86_X32 */
 };
 
 static long snd_rawmidi_ioctl_compat(struct file *file, unsigned int cmd, unsigned long arg)
@@ -115,6 +164,10 @@ static long snd_rawmidi_ioctl_compat(struct file *file, unsigned int cmd, unsign
 		return snd_rawmidi_ioctl_params_compat(rfile, argp);
 	case SNDRV_RAWMIDI_IOCTL_STATUS32:
 		return snd_rawmidi_ioctl_status_compat(rfile, argp);
+#ifdef CONFIG_X86_X32
+	case SNDRV_RAWMIDI_IOCTL_STATUS_X32:
+		return snd_rawmidi_ioctl_status_x32(rfile, argp);
+#endif /* CONFIG_X86_X32 */
 	}
 	return -ENOIOCTLCMD;
 }
-- 
2.7.3

[PATCH 3.12 25/58] ALSA: timer: Fix ioctls for X32 ABI

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit b24e7ad1fdc22177eb3e51584e1cfcb45d818488 upstream.

X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes
incompatible with IA32.  This results in NOTTY error when the ioctl is
issued.

Meanwhile, this struct in X32 is essentially identical with the one in
X86-64, so we can just bypassing to the existing code for this
specific compat ioctl.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/core/timer_compat.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/core/timer_compat.c b/sound/core/timer_compat.c
index e05802ae6e1b..1314b732bff3 100644
--- a/sound/core/timer_compat.c
+++ b/sound/core/timer_compat.c
@@ -88,12 +88,21 @@ static int snd_timer_user_status_compat(struct file *file,
 	return 0;
 }
 
+#ifdef CONFIG_X86_X32
+/* X32 ABI has the same struct as x86-64 */
+#define snd_timer_user_status_x32(file, s) \
+	snd_timer_user_status(file, s)
+#endif /* CONFIG_X86_X32 */
+
 /*
  */
 
 enum {
 	SNDRV_TIMER_IOCTL_INFO32 = _IOR('T', 0x11, struct snd_timer_info32),
 	SNDRV_TIMER_IOCTL_STATUS32 = _IOW('T', 0x14, struct snd_timer_status32),
+#ifdef CONFIG_X86_X32
+	SNDRV_TIMER_IOCTL_STATUS_X32 = _IOW('T', 0x14, struct snd_timer_status),
+#endif /* CONFIG_X86_X32 */
 };
 
 static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, unsigned long arg)
@@ -122,6 +131,10 @@ static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, uns
 		return snd_timer_user_info_compat(file, argp);
 	case SNDRV_TIMER_IOCTL_STATUS32:
 		return snd_timer_user_status_compat(file, argp);
+#ifdef CONFIG_X86_X32
+	case SNDRV_TIMER_IOCTL_STATUS_X32:
+		return snd_timer_user_status_x32(file, argp);
+#endif /* CONFIG_X86_X32 */
 	}
 	return -ENOIOCTLCMD;
 }
-- 
2.7.3

[PATCH 3.12 26/58] ALSA: seq: oss: Don't drain at closing a client

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 197b958c1e76a575d77038cc98b4bebc2134279f upstream.

The OSS sequencer client tries to drain the pending events at
releasing.  Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future.  Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
future.

Back to history, the draining feature was implemented at the time we
misinterpreted POSIX definition for blocking file operation.
Actually, such a behavior is superfluous at release, and we should
just release the device as is instead of keeping it up forever.

This patch just removes the draining call that may block the release
for too long time unexpectedly.

BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/core/seq/oss/seq_oss.c        |  2 --
 sound/core/seq/oss/seq_oss_device.h |  1 -
 sound/core/seq/oss/seq_oss_init.c   | 17 -----------------
 3 files changed, 20 deletions(-)

diff --git a/sound/core/seq/oss/seq_oss.c b/sound/core/seq/oss/seq_oss.c
index 8d4d5e853efe..ab774954c985 100644
--- a/sound/core/seq/oss/seq_oss.c
+++ b/sound/core/seq/oss/seq_oss.c
@@ -150,8 +150,6 @@ odev_release(struct inode *inode, struct file *file)
 	if ((dp = file->private_data) == NULL)
 		return 0;
 
-	snd_seq_oss_drain_write(dp);
-
 	mutex_lock(&register_mutex);
 	snd_seq_oss_release(dp);
 	mutex_unlock(&register_mutex);
diff --git a/sound/core/seq/oss/seq_oss_device.h b/sound/core/seq/oss/seq_oss_device.h
index c0154a959d55..2464112b08ad 100644
--- a/sound/core/seq/oss/seq_oss_device.h
+++ b/sound/core/seq/oss/seq_oss_device.h
@@ -131,7 +131,6 @@ int snd_seq_oss_write(struct seq_oss_devinfo *dp, const char __user *buf, int co
 unsigned int snd_seq_oss_poll(struct seq_oss_devinfo *dp, struct file *file, poll_table * wait);
 
 void snd_seq_oss_reset(struct seq_oss_devinfo *dp);
-void snd_seq_oss_drain_write(struct seq_oss_devinfo *dp);
 
 /* */
 void snd_seq_oss_process_queue(struct seq_oss_devinfo *dp, abstime_t time);
diff --git a/sound/core/seq/oss/seq_oss_init.c b/sound/core/seq/oss/seq_oss_init.c
index b3f39b5ed742..f9e09e458227 100644
--- a/sound/core/seq/oss/seq_oss_init.c
+++ b/sound/core/seq/oss/seq_oss_init.c
@@ -457,23 +457,6 @@ snd_seq_oss_release(struct seq_oss_devinfo *dp)
 
 
 /*
- * Wait until the queue is empty (if we don't have nonblock)
- */
-void
-snd_seq_oss_drain_write(struct seq_oss_devinfo *dp)
-{
-	if (! dp->timer->running)
-		return;
-	if (is_write_mode(dp->file_mode) && !is_nonblock_mode(dp->file_mode) &&
-	    dp->writeq) {
-		debug_printk(("syncing..\n"));
-		while (snd_seq_oss_writeq_sync(dp->writeq))
-			;
-	}
-}
-
-
-/*
  * reset sequencer devices
  */
 void
-- 
2.7.3

[PATCH 3.12 27/58] ALSA: hdspm: Fix wrong boolean ctl value accesses

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 537e48136295c5860a92138c5ea3959b9542868b upstream.

snd-hdspm driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements.  This patch fixes them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/pci/rme9652/hdspm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 9585e316a5c6..fd72c7226a36 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -2270,7 +2270,7 @@ static int snd_hdspm_put_system_sample_rate(struct snd_kcontrol *kcontrol,
 {
 	struct hdspm *hdspm = snd_kcontrol_chip(kcontrol);
 
-	hdspm_set_dds_value(hdspm, ucontrol->value.enumerated.item[0]);
+	hdspm_set_dds_value(hdspm, ucontrol->value.integer.value[0]);
 	return 0;
 }
 
@@ -4474,7 +4474,7 @@ static int snd_hdspm_get_tco_word_term(struct snd_kcontrol *kcontrol,
 {
 	struct hdspm *hdspm = snd_kcontrol_chip(kcontrol);
 
-	ucontrol->value.enumerated.item[0] = hdspm->tco->term;
+	ucontrol->value.integer.value[0] = hdspm->tco->term;
 
 	return 0;
 }
@@ -4485,8 +4485,8 @@ static int snd_hdspm_put_tco_word_term(struct snd_kcontrol *kcontrol,
 {
 	struct hdspm *hdspm = snd_kcontrol_chip(kcontrol);
 
-	if (hdspm->tco->term != ucontrol->value.enumerated.item[0]) {
-		hdspm->tco->term = ucontrol->value.enumerated.item[0];
+	if (hdspm->tco->term != ucontrol->value.integer.value[0]) {
+		hdspm->tco->term = ucontrol->value.integer.value[0];
 
 		hdspm_tco_write(hdspm);
 
-- 
2.7.3

[PATCH 3.12 28/58] ALSA: hdsp: Fix wrong boolean ctl value accesses

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit eab3c4db193f5fcccf70e884de9a922ca2c63d80 upstream.

snd-hdsp driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements.  This patch fixes them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/pci/rme9652/hdsp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index f59a321a6d6a..a15e4e9b2774 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -2923,7 +2923,7 @@ static int snd_hdsp_get_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl
 {
 	struct hdsp *hdsp = snd_kcontrol_chip(kcontrol);
 
-	ucontrol->value.enumerated.item[0] = hdsp_dds_offset(hdsp);
+	ucontrol->value.integer.value[0] = hdsp_dds_offset(hdsp);
 	return 0;
 }
 
@@ -2935,7 +2935,7 @@ static int snd_hdsp_put_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl
 
 	if (!snd_hdsp_use_is_exclusive(hdsp))
 		return -EBUSY;
-	val = ucontrol->value.enumerated.item[0];
+	val = ucontrol->value.integer.value[0];
 	spin_lock_irq(&hdsp->lock);
 	if (val != hdsp_dds_offset(hdsp))
 		change = (hdsp_set_dds_offset(hdsp, val) == 0) ? 1 : 0;
-- 
2.7.3

[PATCH 3.12 29/58] ALSA: hdspm: Fix zero-division

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit c1099c3294c2344110085a38c50e478a5992b368 upstream.

HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code.  This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/pci/rme9652/hdspm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index fd72c7226a36..2f5565be9347 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -1602,6 +1602,9 @@ static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
 {
 	u64 n;
 
+	if (snd_BUG_ON(rate <= 0))
+		return;
+
 	if (rate >= 112000)
 		rate /= 4;
 	else if (rate >= 56000)
@@ -2224,6 +2227,8 @@ static int hdspm_get_system_sample_rate(struct hdspm *hdspm)
 		} else {
 			/* slave mode, return external sample rate */
 			rate = hdspm_external_sample_rate(hdspm);
+			if (!rate)
+				rate = hdspm->system_sample_rate;
 		}
 	}
 
@@ -2269,7 +2274,10 @@ static int snd_hdspm_put_system_sample_rate(struct snd_kcontrol *kcontrol,
 					    ucontrol)
 {
 	struct hdspm *hdspm = snd_kcontrol_chip(kcontrol);
+	int rate = ucontrol->value.integer.value[0];
 
+	if (rate < 27000 || rate > 207000)
+		return -EINVAL;
 	hdspm_set_dds_value(hdspm, ucontrol->value.integer.value[0]);
 	return 0;
 }
-- 
2.7.3

[PATCH 3.12 30/58] ALSA: timer: Fix broken compat timer user status ioctl

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 3a72494ac2a3bd229db941d51e7efe2f6ccd947b upstream.

The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one.  This patch addresses
it to return the proper struct.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/core/timer_compat.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/core/timer_compat.c b/sound/core/timer_compat.c
index 1314b732bff3..2e908225d754 100644
--- a/sound/core/timer_compat.c
+++ b/sound/core/timer_compat.c
@@ -70,13 +70,14 @@ static int snd_timer_user_status_compat(struct file *file,
 					struct snd_timer_status32 __user *_status)
 {
 	struct snd_timer_user *tu;
-	struct snd_timer_status status;
+	struct snd_timer_status32 status;
 	
 	tu = file->private_data;
 	if (snd_BUG_ON(!tu->timeri))
 		return -ENXIO;
 	memset(&status, 0, sizeof(status));
-	status.tstamp = tu->tstamp;
+	status.tstamp.tv_sec = tu->tstamp.tv_sec;
+	status.tstamp.tv_nsec = tu->tstamp.tv_nsec;
 	status.resolution = snd_timer_resolution(tu->timeri);
 	status.lost = tu->timeri->lost;
 	status.overrun = tu->overrun;
-- 
2.7.3

[PATCH 3.12 31/58] USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder

[Jiri Slaby]

From: Vittorio Alfieri <vittorio88@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 3c4c615d70c8cbdc8ba8c79ed702640930652a79 upstream.

The Parrot NMEA GPS Flight Recorder is a USB composite device
consisting of hub, flash storage, and cp210x usb to serial chip.
It is an accessory to the mass-produced Parrot AR Drone 2.
The device emits standard NMEA messages which make the it compatible
with NMEA compatible software. It was tested using gpsd version 3.11-3
as an NMEA interpreter and using the official Parrot Flight Recorder.

Signed-off-by: Vittorio Alfieri <vittorio88@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 13c3aa352ebe..26bcd501f314 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -164,6 +164,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
-- 
2.7.3

[PATCH 3.12 32/58] USB: serial: option: add support for Telit LE922 PID 0x1045

[Jiri Slaby]

From: Daniele Palmas <dnlplm@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 5deef5551c77e488922cc4bf4bc76df63be650d0 upstream.

This patch adds support for 0x1045 PID of Telit LE922.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9bab34cf01d4..ed5f2cda23c5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -271,6 +271,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_UE910_V2			0x1012
 #define TELIT_PRODUCT_LE922_USBCFG0		0x1042
 #define TELIT_PRODUCT_LE922_USBCFG3		0x1043
+#define TELIT_PRODUCT_LE922_USBCFG5		0x1045
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
 
@@ -1191,6 +1192,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
 		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
-- 
2.7.3

[PATCH 3.12 33/58] USB: serial: option: add support for Quectel UC20

[Jiri Slaby]

From: Yegor Yefremov <yegorslists@googlemail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit c0992d0f54847d0d1d85c60fcaa054f175ab1ccd upstream.

Add support for Quectel UC20 and blacklist the QMI interface.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ed5f2cda23c5..24366a2afea6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1141,6 +1141,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9003), /* Quectel UC20 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
-- 
2.7.3

[PATCH 3.12 34/58] MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'

[Jiri Slaby]

From: "Maciej W. Rozycki" <macro@imgtec.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit e723e3f7f9591b79e8c56b3d7c5a204a9c571b55 upstream.

Avoid sending a partially initialised `siginfo_t' structure along SIGFPE
signals issued from `do_ov' and `do_trap_or_bp', leading to information
leaking from the kernel stack.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/mips/kernel/traps.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 524841f02803..45c2cb00e180 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -681,15 +681,15 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
 asmlinkage void do_ov(struct pt_regs *regs)
 {
 	enum ctx_state prev_state;
-	siginfo_t info;
+	siginfo_t info = {
+		.si_signo = SIGFPE,
+		.si_code = FPE_INTOVF,
+		.si_addr = (void __user *)regs->cp0_epc,
+	};
 
 	prev_state = exception_enter();
 	die_if_kernel("Integer overflow", regs);
 
-	info.si_code = FPE_INTOVF;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
 	exception_exit(prev_state);
 }
@@ -790,7 +790,7 @@ out:
 static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	const char *str)
 {
-	siginfo_t info;
+	siginfo_t info = { 0 };
 	char b[40];
 
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
@@ -817,7 +817,6 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 		else
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
-		info.si_errno = 0;
 		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;
-- 
2.7.3

[PATCH 3.12 35/58] ubi: Fix out of bounds write in volume update code

[Jiri Slaby]

From: Richard Weinberger <richard@nod.at>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit e4f6daac20332448529b11f09388f1d55ef2084c upstream.

ubi_start_leb_change() allocates too few bytes.
ubi_more_leb_change_data() will write up to req->upd_bytes +
ubi->min_io_size bytes.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/mtd/ubi/upd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 2a1b6e037e1a..0134ba32a057 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -193,7 +193,7 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	vol->changing_leb = 1;
 	vol->ch_lnum = req->lnum;
 
-	vol->upd_buf = vmalloc(req->bytes);
+	vol->upd_buf = vmalloc(ALIGN((int)req->bytes, ubi->min_io_size));
 	if (!vol->upd_buf)
 		return -ENOMEM;
 
-- 
2.7.3

[PATCH 3.12 36/58] Revert "drm/radeon: hold reference to fences in radeon_sa_bo_new"

[Jiri Slaby]

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

This reverts commit 40df18b49e7fe4ec9ab93f68c33661ee291149bd, commit
f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb upstream.

It causes oopses:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffffa010345d>] radeon_fence_ref+0xd/0x50 [radeon]

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: Christian König <christian.koenig@amd.com>
---
 drivers/gpu/drm/radeon/radeon_sa.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_sa.c b/drivers/gpu/drm/radeon/radeon_sa.c
index bb166849aa6e..f0bac68254b7 100644
--- a/drivers/gpu/drm/radeon/radeon_sa.c
+++ b/drivers/gpu/drm/radeon/radeon_sa.c
@@ -349,13 +349,8 @@ int radeon_sa_bo_new(struct radeon_device *rdev,
 			/* see if we can skip over some allocations */
 		} while (radeon_sa_bo_next_hole(sa_manager, fences, tries));
 
-		for (i = 0; i < RADEON_NUM_RINGS; ++i)
-			radeon_fence_ref(fences[i]);
-
 		spin_unlock(&sa_manager->wq.lock);
 		r = radeon_fence_wait_any(rdev, fences, false);
-		for (i = 0; i < RADEON_NUM_RINGS; ++i)
-			radeon_fence_unref(&fences[i]);
 		spin_lock(&sa_manager->wq.lock);
 		/* if we have nothing to wait for block */
 		if (r == -ENOENT && block) {
-- 
2.7.3

Re: [PATCH 3.12 36/58] Revert "drm/radeon: hold reference to fences in radeon_sa_bo_new"

[Nicolai Hähnle]

This is fine. Please consider applying the corrected backport that I 
sent around yesterday.

Apologies for the mess - an unfortunate interaction with older code, 
plus then some stable branches already reverted the original backport 
while others didn't. The best way forward right now is to revert the 
original backport (as indicated in your mail) and apply the fixed one.

Thanks,
Nicolai

On 16.03.2016 05:59, Jiri Slaby wrote:
> 3.12-stable review patch.  If anyone has any objections, please let me know.
>
> ===============
>
> This reverts commit 40df18b49e7fe4ec9ab93f68c33661ee291149bd, commit
> f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb upstream.
>
> It causes oopses:
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> IP: [<ffffffffa010345d>] radeon_fence_ref+0xd/0x50 [radeon]
>
> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
> Cc: Nicolai Hähnle <nicolai.haehnle@amd.com>
> Cc: Christian König <christian.koenig@amd.com>
> ---
>   drivers/gpu/drm/radeon/radeon_sa.c | 5 -----
>   1 file changed, 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_sa.c b/drivers/gpu/drm/radeon/radeon_sa.c
> index bb166849aa6e..f0bac68254b7 100644
> --- a/drivers/gpu/drm/radeon/radeon_sa.c
> +++ b/drivers/gpu/drm/radeon/radeon_sa.c
> @@ -349,13 +349,8 @@ int radeon_sa_bo_new(struct radeon_device *rdev,
>   			/* see if we can skip over some allocations */
>   		} while (radeon_sa_bo_next_hole(sa_manager, fences, tries));
>
> -		for (i = 0; i < RADEON_NUM_RINGS; ++i)
> -			radeon_fence_ref(fences[i]);
> -
>   		spin_unlock(&sa_manager->wq.lock);
>   		r = radeon_fence_wait_any(rdev, fences, false);
> -		for (i = 0; i < RADEON_NUM_RINGS; ++i)
> -			radeon_fence_unref(&fences[i]);
>   		spin_lock(&sa_manager->wq.lock);
>   		/* if we have nothing to wait for block */
>   		if (r == -ENOENT && block) {
>

[PATCH 3.12 37/58] KVM: VMX: disable PEBS before a guest entry

[Jiri Slaby]

From: Radim Krčmář <rkrcmar@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 7099e2e1f4d9051f31bbfa5803adf954bb5d76ef upstream.

Linux guests on Haswell (and also SandyBridge and Broadwell, at least)
would crash if you decided to run a host command that uses PEBS, like
  perf record -e 'cpu/mem-stores/pp' -a

This happens because KVM is using VMX MSR switching to disable PEBS, but
SDM [2015-12] 18.4.4.4 Re-configuring PEBS Facilities explains why it
isn't safe:
  When software needs to reconfigure PEBS facilities, it should allow a
  quiescent period between stopping the prior event counting and setting
  up a new PEBS event. The quiescent period is to allow any latent
  residual PEBS records to complete its capture at their previously
  specified buffer address (provided by IA32_DS_AREA).

There might not be a quiescent period after the MSR switch, so a CPU
ends up using host's MSR_IA32_DS_AREA to access an area in guest's
memory.  (Or MSR switching is just buggy on some models.)

The guest can learn something about the host this way:
If the guest doesn't map address pointed by MSR_IA32_DS_AREA, it results
in #PF where we leak host's MSR_IA32_DS_AREA through CR2.

After that, a malicious guest can map and configure memory where
MSR_IA32_DS_AREA is pointing and can therefore get an output from
host's tracing.

This is not a critical leak as the host must initiate with PEBS tracing
and I have not been able to get a record from more than one instruction
before vmentry in vmx_vcpu_run() (that place has most registers already
overwritten with guest's).

We could disable PEBS just few instructions before vmentry, but
disabling it earlier shouldn't affect host tracing too much.
We also don't need to switch MSR_IA32_PEBS_ENABLE on VMENTRY, but that
optimization isn't worth its code, IMO.

(If you are implementing PEBS for guests, be sure to handle the case
 where both host and guest enable PEBS, because this patch doesn't.)

Fixes: 26a4f3c08de4 ("perf/x86: disable PEBS on a guest entry.")
Reported-by: Jiří Olša <jolsa@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/x86/kvm/vmx.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 53fede68963d..9e439266554d 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1492,6 +1492,13 @@ static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
 			return;
 		}
 		break;
+	case MSR_IA32_PEBS_ENABLE:
+		/* PEBS needs a quiescent period after being disabled (to write
+		 * a record).  Disabling PEBS through VMX MSR swapping doesn't
+		 * provide that period, so a CPU could write host's record into
+		 * guest's memory.
+		 */
+		wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
 	}
 
 	for (i = 0; i < m->nr; ++i)
-- 
2.7.3

[PATCH 3.12 38/58] tracing: Fix check for cpu online when event is disabled

[Jiri Slaby]

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit dc17147de328a74bbdee67c1bf37d2f1992de756 upstream.

Commit f37755490fe9b ("tracepoints: Do not trace when cpu is offline") added
a check to make sure that tracepoints only get called when the cpu is
online, as it uses rcu_read_lock_sched() for protection.

Commit 3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints
are disabled") added lockdep checks (including rcu checks) for events that
are not enabled to catch possible RCU issues that would only be triggered if
a trace event was enabled. Commit f37755490fe9b only stopped the warnings
when the trace event was enabled but did not prevent warnings if the trace
event was called when disabled.

To fix this, the cpu online check is moved to where the condition is added
to the trace event. This will place the cpu online check in all places that
it may be used now and in the future.

Fixes: f37755490fe9b ("tracepoints: Do not trace when cpu is offline")
Fixes: 3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints are disabled")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/tracepoint.h | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index c1248996006f..9ff9ca22cfb7 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -129,9 +129,6 @@ static inline void tracepoint_synchronize_unregister(void)
 		void *it_func;						\
 		void *__data;						\
 									\
-		if (!cpu_online(raw_smp_processor_id()))		\
-			return;						\
-									\
 		if (!(cond))						\
 			return;						\
 		prercu;							\
@@ -265,15 +262,19 @@ static inline void tracepoint_synchronize_unregister(void)
  * "void *__data, proto" as the callback prototype.
  */
 #define DECLARE_TRACE_NOARGS(name)					\
-		__DECLARE_TRACE(name, void, , 1, void *__data, __data)
+	__DECLARE_TRACE(name, void, ,					\
+			cpu_online(raw_smp_processor_id()),		\
+			void *__data, __data)
 
 #define DECLARE_TRACE(name, proto, args)				\
-		__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), 1,	\
-				PARAMS(void *__data, proto),		\
-				PARAMS(__data, args))
+	__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),		\
+			cpu_online(raw_smp_processor_id()),		\
+			PARAMS(void *__data, proto),			\
+			PARAMS(__data, args))
 
 #define DECLARE_TRACE_CONDITION(name, proto, args, cond)		\
-	__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), PARAMS(cond), \
+	__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),		\
+			cpu_online(raw_smp_processor_id()) && (PARAMS(cond)), \
 			PARAMS(void *__data, proto),			\
 			PARAMS(__data, args))
 
-- 
2.7.3

[PATCH 3.12 39/58] ASoC: wm8994: Fix enum ctl accesses in a wrong type

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 8019c0b37cd5a87107808300a496388b777225bf upstream.

The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in
wm8994 codec driver are enum ctls, while the current driver accesses
wrongly via value.integer.value[].  They have to be via
value.enumerated.item[] instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/soc/codecs/wm8994.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index d495d019f18b..84e9533ca436 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -360,7 +360,7 @@ static int wm8994_put_drc_enum(struct snd_kcontrol *kcontrol,
 	struct wm8994 *control = wm8994->wm8994;
 	struct wm8994_pdata *pdata = &control->pdata;
 	int drc = wm8994_get_drc(kcontrol->id.name);
-	int value = ucontrol->value.integer.value[0];
+	int value = ucontrol->value.enumerated.item[0];
 
 	if (drc < 0)
 		return drc;
@@ -467,7 +467,7 @@ static int wm8994_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
 	struct wm8994 *control = wm8994->wm8994;
 	struct wm8994_pdata *pdata = &control->pdata;
 	int block = wm8994_get_retune_mobile_block(kcontrol->id.name);
-	int value = ucontrol->value.integer.value[0];
+	int value = ucontrol->value.enumerated.item[0];
 
 	if (block < 0)
 		return block;
-- 
2.7.3

[PATCH 3.12 40/58] ASoC: wm8958: Fix enum ctl accesses in a wrong type

[Jiri Slaby]

From: Takashi Iwai <tiwai@suse.de>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit d0784829ae3b0beeb69b476f017d5c8a2eb95198 upstream.

"MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in
wm8958 codec driver are enum, while the current driver accesses
wrongly via value.integer.value[].  They have to be via
value.enumerated.item[] instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 sound/soc/codecs/wm8958-dsp2.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c
index 754f88e1fdab..4892966fc1b8 100644
--- a/sound/soc/codecs/wm8958-dsp2.c
+++ b/sound/soc/codecs/wm8958-dsp2.c
@@ -459,7 +459,7 @@ static int wm8958_put_mbc_enum(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct wm8994 *control = wm8994->wm8994;
-	int value = ucontrol->value.integer.value[0];
+	int value = ucontrol->value.enumerated.item[0];
 	int reg;
 
 	/* Don't allow on the fly reconfiguration */
@@ -549,7 +549,7 @@ static int wm8958_put_vss_enum(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct wm8994 *control = wm8994->wm8994;
-	int value = ucontrol->value.integer.value[0];
+	int value = ucontrol->value.enumerated.item[0];
 	int reg;
 
 	/* Don't allow on the fly reconfiguration */
@@ -582,7 +582,7 @@ static int wm8958_put_vss_hpf_enum(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct wm8994 *control = wm8994->wm8994;
-	int value = ucontrol->value.integer.value[0];
+	int value = ucontrol->value.enumerated.item[0];
 	int reg;
 
 	/* Don't allow on the fly reconfiguration */
@@ -749,7 +749,7 @@ static int wm8958_put_enh_eq_enum(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct wm8994 *control = wm8994->wm8994;
-	int value = ucontrol->value.integer.value[0];
+	int value = ucontrol->value.enumerated.item[0];
 	int reg;
 
 	/* Don't allow on the fly reconfiguration */
-- 
2.7.3

[PATCH 3.12 41/58] wext: fix message delay/ordering

[Jiri Slaby]

From: Johannes Berg <johannes.berg@intel.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 8bf862739a7786ae72409220914df960a0aa80d8 upstream.

Beniamino reported that he was getting an RTM_NEWLINK message for a
given interface, after the RTM_DELLINK for it. It turns out that the
message is a wireless extensions message, which was sent because the
interface had been connected and disconnection while it was deleted
caused a wext message.

For its netlink messages, wext uses RTM_NEWLINK, but the message is
without all the regular rtnetlink attributes, so "ip monitor link"
prints just rudimentary information:

5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
Deleted 5: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
    link/ether 02:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
5: wlan1: <BROADCAST,MULTICAST,UP>
    link/ether
(from my hwsim reproduction)

This can cause userspace to get confused since it doesn't expect an
RTM_NEWLINK message after RTM_DELLINK.

The reason for this is that wext schedules a worker to send out the
messages, and the scheduling delay can cause the messages to get out
to userspace in different order.

To fix this, have wext register a netdevice notifier and flush out
any pending messages when netdevice state changes. This fixes any
ordering whenever the original message wasn't sent by a notifier
itself.

Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 net/wireless/wext-core.c | 51 +++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 40 insertions(+), 11 deletions(-)

diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
index c8717c1d082e..87dd619fb2e9 100644
--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -342,6 +342,39 @@ static const int compat_event_type_size[] = {
 
 /* IW event code */
 
+static void wireless_nlevent_flush(void)
+{
+	struct sk_buff *skb;
+	struct net *net;
+
+	ASSERT_RTNL();
+
+	for_each_net(net) {
+		while ((skb = skb_dequeue(&net->wext_nlevents)))
+			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
+				    GFP_KERNEL);
+	}
+}
+
+static int wext_netdev_notifier_call(struct notifier_block *nb,
+				     unsigned long state, void *ptr)
+{
+	/*
+	 * When a netdev changes state in any way, flush all pending messages
+	 * to avoid them going out in a strange order, e.g. RTM_NEWLINK after
+	 * RTM_DELLINK, or with IFF_UP after without IFF_UP during dev_close()
+	 * or similar - all of which could otherwise happen due to delays from
+	 * schedule_work().
+	 */
+	wireless_nlevent_flush();
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block wext_netdev_notifier = {
+	.notifier_call = wext_netdev_notifier_call,
+};
+
 static int __net_init wext_pernet_init(struct net *net)
 {
 	skb_queue_head_init(&net->wext_nlevents);
@@ -360,7 +393,12 @@ static struct pernet_operations wext_pernet_ops = {
 
 static int __init wireless_nlevent_init(void)
 {
-	return register_pernet_subsys(&wext_pernet_ops);
+	int err = register_pernet_subsys(&wext_pernet_ops);
+
+	if (err)
+		return err;
+
+	return register_netdevice_notifier(&wext_netdev_notifier);
 }
 
 subsys_initcall(wireless_nlevent_init);
@@ -368,17 +406,8 @@ subsys_initcall(wireless_nlevent_init);
 /* Process events generated by the wireless layer or the driver. */
 static void wireless_nlevent_process(struct work_struct *work)
 {
-	struct sk_buff *skb;
-	struct net *net;
-
 	rtnl_lock();
-
-	for_each_net(net) {
-		while ((skb = skb_dequeue(&net->wext_nlevents)))
-			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
-				    GFP_KERNEL);
-	}
-
+	wireless_nlevent_flush();
 	rtnl_unlock();
 }
 
-- 
2.7.3

[PATCH 3.12 42/58] mac80211: minstrel_ht: set default tx aggregation timeout to 0

[Jiri Slaby]

From: Felix Fietkau <nbd@openwrt.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 7a36b930e6ed4702c866dc74a5ad07318a57c688 upstream.

The value 5000 was put here with the addition of the timeout field to
ieee80211_start_tx_ba_session. It was originally added in mac80211 to
save resources for drivers like iwlwifi, which only supports a limited
number of concurrent aggregation sessions.

Since iwlwifi does not use minstrel_ht and other drivers don't need
this, 0 is a better default - especially since there have been
recent reports of aggregation setup related issues reproduced with
ath9k. This should improve stability without causing any adverse
effects.

Acked-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 net/mac80211/rc80211_minstrel_ht.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 7c323f27ba23..96b6dc0155de 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -454,7 +454,7 @@ minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb)
 	if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO)
 		return;
 
-	ieee80211_start_tx_ba_session(pubsta, tid, 5000);
+	ieee80211_start_tx_ba_session(pubsta, tid, 0);
 }
 
 static void
-- 
2.7.3

[PATCH 3.12 43/58] powerpc: Fix dedotify for binutils >= 2.26

[Jiri Slaby]

From: Andreas Schwab <schwab@linux-m68k.org>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit f15838e9cac8f78f0cc506529bb9d3b9fa589c1f upstream.

Since binutils 2.26 BFD is doing suffix merging on STRTAB sections.  But
dedotify modifies the symbol names in place, which can also modify
unrelated symbols with a name that matches a suffix of a dotted name.  To
remove the leading dot of a symbol name we can just increment the pointer
into the STRTAB section instead.

Backport to all stables to avoid breakage when people update their
binutils - mpe.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/powerpc/kernel/module_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 6ee59a0eb268..48b4cf6b2a24 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -192,7 +192,7 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 		if (syms[i].st_shndx == SHN_UNDEF) {
 			char *name = strtab + syms[i].st_name;
 			if (name[0] == '.')
-				memmove(name, name+1, strlen(name));
+				syms[i].st_name++;
 		}
 	}
 }
-- 
2.7.3

[PATCH 3.12 44/58] KVM: x86: move steal time initialization to vcpu entry time

[Jiri Slaby]

From: Marcelo Tosatti <mtosatti@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 7cae2bedcbd4680b155999655e49c27b9cf020fa upstream.

As reported at https://bugs.launchpad.net/qemu/+bug/1494350,
it is possible to have vcpu->arch.st.last_steal initialized
from a thread other than vcpu thread, say the iothread, via
KVM_SET_MSRS.

Which can cause an overflow later (when subtracting from vcpu threads
sched_info.run_delay).

To avoid that, move steal time accumulation to vcpu entry time,
before copying steal time data to guest.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 arch/x86/kvm/x86.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d3691ab6d6a0..356e78f2ad1a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1978,6 +1978,8 @@ static void accumulate_steal_time(struct kvm_vcpu *vcpu)
 
 static void record_steal_time(struct kvm_vcpu *vcpu)
 {
+	accumulate_steal_time(vcpu);
+
 	if (!(vcpu->arch.st.msr_val & KVM_MSR_ENABLED))
 		return;
 
@@ -2111,12 +2113,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (!(data & KVM_MSR_ENABLED))
 			break;
 
-		vcpu->arch.st.last_steal = current->sched_info.run_delay;
-
-		preempt_disable();
-		accumulate_steal_time(vcpu);
-		preempt_enable();
-
 		kvm_make_request(KVM_REQ_STEAL_UPDATE, vcpu);
 
 		break;
@@ -2795,7 +2791,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		vcpu->cpu = cpu;
 	}
 
-	accumulate_steal_time(vcpu);
 	kvm_make_request(KVM_REQ_STEAL_UPDATE, vcpu);
 }
 
-- 
2.7.3

[PATCH 3.12 45/58] lib/ucs2_string: Add ucs2 -> utf8 helper functions

[Jiri Slaby]

From: Peter Jones <pjones@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 73500267c930baadadb0d02284909731baf151f7 upstream.

This adds ucs2_utf8size(), which tells us how big our ucs2 string is in
bytes, and ucs2_as_utf8, which translates from ucs2 to utf8..

Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/linux/ucs2_string.h |  4 +++
 lib/ucs2_string.c           | 62 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+)

diff --git a/include/linux/ucs2_string.h b/include/linux/ucs2_string.h
index cbb20afdbc01..bb679b48f408 100644
--- a/include/linux/ucs2_string.h
+++ b/include/linux/ucs2_string.h
@@ -11,4 +11,8 @@ unsigned long ucs2_strlen(const ucs2_char_t *s);
 unsigned long ucs2_strsize(const ucs2_char_t *data, unsigned long maxlength);
 int ucs2_strncmp(const ucs2_char_t *a, const ucs2_char_t *b, size_t len);
 
+unsigned long ucs2_utf8size(const ucs2_char_t *src);
+unsigned long ucs2_as_utf8(u8 *dest, const ucs2_char_t *src,
+			   unsigned long maxlength);
+
 #endif /* _LINUX_UCS2_STRING_H_ */
diff --git a/lib/ucs2_string.c b/lib/ucs2_string.c
index 6f500ef2301d..17dd74e21ef9 100644
--- a/lib/ucs2_string.c
+++ b/lib/ucs2_string.c
@@ -49,3 +49,65 @@ ucs2_strncmp(const ucs2_char_t *a, const ucs2_char_t *b, size_t len)
         }
 }
 EXPORT_SYMBOL(ucs2_strncmp);
+
+unsigned long
+ucs2_utf8size(const ucs2_char_t *src)
+{
+	unsigned long i;
+	unsigned long j = 0;
+
+	for (i = 0; i < ucs2_strlen(src); i++) {
+		u16 c = src[i];
+
+		if (c > 0x800)
+			j += 3;
+		else if (c > 0x80)
+			j += 2;
+		else
+			j += 1;
+	}
+
+	return j;
+}
+EXPORT_SYMBOL(ucs2_utf8size);
+
+/*
+ * copy at most maxlength bytes of whole utf8 characters to dest from the
+ * ucs2 string src.
+ *
+ * The return value is the number of characters copied, not including the
+ * final NUL character.
+ */
+unsigned long
+ucs2_as_utf8(u8 *dest, const ucs2_char_t *src, unsigned long maxlength)
+{
+	unsigned int i;
+	unsigned long j = 0;
+	unsigned long limit = ucs2_strnlen(src, maxlength);
+
+	for (i = 0; maxlength && i < limit; i++) {
+		u16 c = src[i];
+
+		if (c > 0x800) {
+			if (maxlength < 3)
+				break;
+			maxlength -= 3;
+			dest[j++] = 0xe0 | (c & 0xf000) >> 12;
+			dest[j++] = 0x80 | (c & 0x0fc0) >> 8;
+			dest[j++] = 0x80 | (c & 0x003f);
+		} else if (c > 0x80) {
+			if (maxlength < 2)
+				break;
+			maxlength -= 2;
+			dest[j++] = 0xc0 | (c & 0xfe0) >> 5;
+			dest[j++] = 0x80 | (c & 0x01f);
+		} else {
+			maxlength -= 1;
+			dest[j++] = c & 0x7f;
+		}
+	}
+	if (maxlength)
+		dest[j] = '\0';
+	return j;
+}
+EXPORT_SYMBOL(ucs2_as_utf8);
-- 
2.7.3

[PATCH 3.12 46/58] efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version

[Jiri Slaby]

From: Peter Jones <pjones@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit e0d64e6a880e64545ad7d55786aa84ab76bac475 upstream.

Translate EFI's UCS-2 variable names to UTF-8 instead of just assuming
all variable names fit in ASCII.

Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/firmware/efi/efivars.c | 28 ++++++++++------------------
 fs/efivarfs/super.c            |  7 +++----
 2 files changed, 13 insertions(+), 22 deletions(-)

diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c
index 8c5a61ae03ea..0d33f42de731 100644
--- a/drivers/firmware/efi/efivars.c
+++ b/drivers/firmware/efi/efivars.c
@@ -409,35 +409,27 @@ efivar_create_sysfs_entry(struct efivar_entry *new_var)
 {
 	int i, short_name_size;
 	char *short_name;
-	unsigned long variable_name_size;
-	efi_char16_t *variable_name;
-
-	variable_name = new_var->var.VariableName;
-	variable_name_size = ucs2_strlen(variable_name) * sizeof(efi_char16_t);
+	unsigned long utf8_name_size;
+	efi_char16_t *variable_name = new_var->var.VariableName;
 
 	/*
-	 * Length of the variable bytes in ASCII, plus the '-' separator,
+	 * Length of the variable bytes in UTF8, plus the '-' separator,
 	 * plus the GUID, plus trailing NUL
 	 */
-	short_name_size = variable_name_size / sizeof(efi_char16_t)
-				+ 1 + EFI_VARIABLE_GUID_LEN + 1;
-
-	short_name = kzalloc(short_name_size, GFP_KERNEL);
+	utf8_name_size = ucs2_utf8size(variable_name);
+	short_name_size = utf8_name_size + 1 + EFI_VARIABLE_GUID_LEN + 1;
 
+	short_name = kmalloc(short_name_size, GFP_KERNEL);
 	if (!short_name)
 		return 1;
 
-	/* Convert Unicode to normal chars (assume top bits are 0),
-	   ala UTF-8 */
-	for (i=0; i < (int)(variable_name_size / sizeof(efi_char16_t)); i++) {
-		short_name[i] = variable_name[i] & 0xFF;
-	}
+	ucs2_as_utf8(short_name, variable_name, short_name_size);
+
 	/* This is ugly, but necessary to separate one vendor's
 	   private variables from another's.         */
-
-	*(short_name + strlen(short_name)) = '-';
+	short_name[utf8_name_size] = '-';
 	efi_guid_unparse(&new_var->var.VendorGuid,
-			 short_name + strlen(short_name));
+			 short_name + utf8_name_size + 1);
 
 	new_var->kobj.kset = efivars_kset;
 
diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c
index a8766b880c07..d4918a056504 100644
--- a/fs/efivarfs/super.c
+++ b/fs/efivarfs/super.c
@@ -127,7 +127,7 @@ static int efivarfs_callback(efi_char16_t *name16, efi_guid_t vendor,
 	struct dentry *dentry, *root = sb->s_root;
 	unsigned long size = 0;
 	char *name;
-	int len, i;
+	int len;
 	int err = -ENOMEM;
 
 	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
@@ -137,15 +137,14 @@ static int efivarfs_callback(efi_char16_t *name16, efi_guid_t vendor,
 	memcpy(entry->var.VariableName, name16, name_size);
 	memcpy(&(entry->var.VendorGuid), &vendor, sizeof(efi_guid_t));
 
-	len = ucs2_strlen(entry->var.VariableName);
+	len = ucs2_utf8size(entry->var.VariableName);
 
 	/* name, plus '-', plus GUID, plus NUL*/
 	name = kmalloc(len + 1 + EFI_VARIABLE_GUID_LEN + 1, GFP_KERNEL);
 	if (!name)
 		goto fail;
 
-	for (i = 0; i < len; i++)
-		name[i] = entry->var.VariableName[i] & 0xFF;
+	ucs2_as_utf8(name, entry->var.VariableName, len);
 
 	name[len] = '-';
 
-- 
2.7.3

[PATCH 3.12 47/58] efi: Do variable name validation tests in utf8

[Jiri Slaby]

From: Peter Jones <pjones@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 3dcb1f55dfc7631695e69df4a0d589ce5274bd07 upstream.

Actually translate from ucs2 to utf8 before doing the test, and then
test against our other utf8 data, instead of fudging it.

Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/firmware/efi/efivars.c |  4 +--
 drivers/firmware/efi/vars.c    | 58 +++++++++++++++++++++++++-----------------
 include/linux/efi.h            |  6 +++--
 3 files changed, 40 insertions(+), 28 deletions(-)

diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c
index 0d33f42de731..b4d5eeb78ffd 100644
--- a/drivers/firmware/efi/efivars.c
+++ b/drivers/firmware/efi/efivars.c
@@ -219,7 +219,7 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
 	}
 
 	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
-	    efivar_validate(new_var, new_var->Data, new_var->DataSize) == false) {
+	    efivar_validate(new_var->VariableName, new_var->Data, new_var->DataSize) == false) {
 		printk(KERN_ERR "efivars: Malformed variable content\n");
 		return -EINVAL;
 	}
@@ -334,7 +334,7 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
 		return -EACCES;
 
 	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
-	    efivar_validate(new_var, new_var->Data, new_var->DataSize) == false) {
+	    efivar_validate(new_var->VariableName, new_var->Data, new_var->DataSize) == false) {
 		printk(KERN_ERR "efivars: Malformed variable content\n");
 		return -EINVAL;
 	}
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index e6125522860a..aad48b99553f 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -42,7 +42,7 @@ DECLARE_WORK(efivar_work, NULL);
 EXPORT_SYMBOL_GPL(efivar_work);
 
 static bool
-validate_device_path(struct efi_variable *var, int match, u8 *buffer,
+validate_device_path(efi_char16_t *var_name, int match, u8 *buffer,
 		     unsigned long len)
 {
 	struct efi_generic_dev_path *node;
@@ -75,7 +75,7 @@ validate_device_path(struct efi_variable *var, int match, u8 *buffer,
 }
 
 static bool
-validate_boot_order(struct efi_variable *var, int match, u8 *buffer,
+validate_boot_order(efi_char16_t *var_name, int match, u8 *buffer,
 		    unsigned long len)
 {
 	/* An array of 16-bit integers */
@@ -86,18 +86,18 @@ validate_boot_order(struct efi_variable *var, int match, u8 *buffer,
 }
 
 static bool
-validate_load_option(struct efi_variable *var, int match, u8 *buffer,
+validate_load_option(efi_char16_t *var_name, int match, u8 *buffer,
 		     unsigned long len)
 {
 	u16 filepathlength;
 	int i, desclength = 0, namelen;
 
-	namelen = ucs2_strnlen(var->VariableName, sizeof(var->VariableName));
+	namelen = ucs2_strnlen(var_name, EFI_VAR_NAME_LEN);
 
 	/* Either "Boot" or "Driver" followed by four digits of hex */
 	for (i = match; i < match+4; i++) {
-		if (var->VariableName[i] > 127 ||
-		    hex_to_bin(var->VariableName[i] & 0xff) < 0)
+		if (var_name[i] > 127 ||
+		    hex_to_bin(var_name[i] & 0xff) < 0)
 			return true;
 	}
 
@@ -132,12 +132,12 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer,
 	/*
 	 * And, finally, check the filepath
 	 */
-	return validate_device_path(var, match, buffer + desclength + 6,
+	return validate_device_path(var_name, match, buffer + desclength + 6,
 				    filepathlength);
 }
 
 static bool
-validate_uint16(struct efi_variable *var, int match, u8 *buffer,
+validate_uint16(efi_char16_t *var_name, int match, u8 *buffer,
 		unsigned long len)
 {
 	/* A single 16-bit integer */
@@ -148,7 +148,7 @@ validate_uint16(struct efi_variable *var, int match, u8 *buffer,
 }
 
 static bool
-validate_ascii_string(struct efi_variable *var, int match, u8 *buffer,
+validate_ascii_string(efi_char16_t *var_name, int match, u8 *buffer,
 		      unsigned long len)
 {
 	int i;
@@ -166,7 +166,7 @@ validate_ascii_string(struct efi_variable *var, int match, u8 *buffer,
 
 struct variable_validate {
 	char *name;
-	bool (*validate)(struct efi_variable *var, int match, u8 *data,
+	bool (*validate)(efi_char16_t *var_name, int match, u8 *data,
 			 unsigned long len);
 };
 
@@ -189,10 +189,19 @@ static const struct variable_validate variable_validate[] = {
 };
 
 bool
-efivar_validate(struct efi_variable *var, u8 *data, unsigned long len)
+efivar_validate(efi_char16_t *var_name, u8 *data, unsigned long data_size)
 {
 	int i;
-	u16 *unicode_name = var->VariableName;
+	unsigned long utf8_size;
+	u8 *utf8_name;
+
+	utf8_size = ucs2_utf8size(var_name);
+	utf8_name = kmalloc(utf8_size + 1, GFP_KERNEL);
+	if (!utf8_name)
+		return false;
+
+	ucs2_as_utf8(utf8_name, var_name, utf8_size);
+	utf8_name[utf8_size] = '\0';
 
 	for (i = 0; variable_validate[i].validate != NULL; i++) {
 		const char *name = variable_validate[i].name;
@@ -200,28 +209,29 @@ efivar_validate(struct efi_variable *var, u8 *data, unsigned long len)
 
 		for (match = 0; ; match++) {
 			char c = name[match];
-			u16 u = unicode_name[match];
-
-			/* All special variables are plain ascii */
-			if (u > 127)
-				return true;
+			char u = utf8_name[match];
 
 			/* Wildcard in the matching name means we've matched */
-			if (c == '*')
-				return variable_validate[i].validate(var,
-							     match, data, len);
+			if (c == '*') {
+				kfree(utf8_name);
+				return variable_validate[i].validate(var_name,
+							match, data, data_size);
+			}
 
 			/* Case sensitive match */
 			if (c != u)
 				break;
 
 			/* Reached the end of the string while matching */
-			if (!c)
-				return variable_validate[i].validate(var,
-							     match, data, len);
+			if (!c) {
+				kfree(utf8_name);
+				return variable_validate[i].validate(var_name,
+							match, data, data_size);
+			}
 		}
 	}
 
+	kfree(utf8_name);
 	return true;
 }
 EXPORT_SYMBOL_GPL(efivar_validate);
@@ -805,7 +815,7 @@ int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes,
 
 	*set = false;
 
-	if (efivar_validate(&entry->var, data, *size) == false)
+	if (efivar_validate(name, data, *size) == false)
 		return -EINVAL;
 
 	/*
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 094ddd0f5d1c..68a4410fc9e6 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -769,8 +769,10 @@ struct efivars {
  * and we use a page for reading/writing.
  */
 
+#define EFI_VAR_NAME_LEN	1024
+
 struct efi_variable {
-	efi_char16_t  VariableName[1024/sizeof(efi_char16_t)];
+	efi_char16_t  VariableName[EFI_VAR_NAME_LEN/sizeof(efi_char16_t)];
 	efi_guid_t    VendorGuid;
 	unsigned long DataSize;
 	__u8          Data[1024];
@@ -834,7 +836,7 @@ int efivar_entry_iter(int (*func)(struct efivar_entry *, void *),
 struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid,
 				       struct list_head *head, bool remove);
 
-bool efivar_validate(struct efi_variable *var, u8 *data, unsigned long len);
+bool efivar_validate(efi_char16_t *var_name, u8 *data, unsigned long len);
 
 extern struct work_struct efivar_work;
 void efivar_run_worker(void);
-- 
2.7.3

[PATCH 3.12 48/58] efi: Make our variable validation list include the guid

[Jiri Slaby]

From: Peter Jones <pjones@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 8282f5d9c17fe15a9e658c06e3f343efae1a2a2f upstream.

All the variables in this list so far are defined to be in the global
namespace in the UEFI spec, so this just further ensures we're
validating the variables we think we are.

Including the guid for entries will become more important in future
patches when we decide whether or not to allow deletion of variables
based on presence in this list.

Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/firmware/efi/efivars.c |  6 +++--
 drivers/firmware/efi/vars.c    | 52 +++++++++++++++++++++++++++---------------
 include/linux/efi.h            |  3 ++-
 3 files changed, 39 insertions(+), 22 deletions(-)

diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c
index b4d5eeb78ffd..d363009f8feb 100644
--- a/drivers/firmware/efi/efivars.c
+++ b/drivers/firmware/efi/efivars.c
@@ -219,7 +219,8 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
 	}
 
 	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
-	    efivar_validate(new_var->VariableName, new_var->Data, new_var->DataSize) == false) {
+	    efivar_validate(new_var->VendorGuid, new_var->VariableName,
+			    new_var->Data, new_var->DataSize) == false) {
 		printk(KERN_ERR "efivars: Malformed variable content\n");
 		return -EINVAL;
 	}
@@ -334,7 +335,8 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
 		return -EACCES;
 
 	if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 ||
-	    efivar_validate(new_var->VariableName, new_var->Data, new_var->DataSize) == false) {
+	    efivar_validate(new_var->VendorGuid, new_var->VariableName,
+			    new_var->Data, new_var->DataSize) == false) {
 		printk(KERN_ERR "efivars: Malformed variable content\n");
 		return -EINVAL;
 	}
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index aad48b99553f..ce0ead43f7e1 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -165,31 +165,42 @@ validate_ascii_string(efi_char16_t *var_name, int match, u8 *buffer,
 }
 
 struct variable_validate {
+	efi_guid_t vendor;
 	char *name;
 	bool (*validate)(efi_char16_t *var_name, int match, u8 *data,
 			 unsigned long len);
 };
 
+/*
+ * This is the list of variables we need to validate.
+ *
+ * If it has a validate() method that's not NULL, it'll go into the
+ * validation routine.  If not, it is assumed valid.
+ *
+ * Note that it's sorted by {vendor,name}, but globbed names must come after
+ * any other name with the same prefix.
+ */
 static const struct variable_validate variable_validate[] = {
-	{ "BootNext", validate_uint16 },
-	{ "BootOrder", validate_boot_order },
-	{ "DriverOrder", validate_boot_order },
-	{ "Boot*", validate_load_option },
-	{ "Driver*", validate_load_option },
-	{ "ConIn", validate_device_path },
-	{ "ConInDev", validate_device_path },
-	{ "ConOut", validate_device_path },
-	{ "ConOutDev", validate_device_path },
-	{ "ErrOut", validate_device_path },
-	{ "ErrOutDev", validate_device_path },
-	{ "Timeout", validate_uint16 },
-	{ "Lang", validate_ascii_string },
-	{ "PlatformLang", validate_ascii_string },
-	{ "", NULL },
+	{ EFI_GLOBAL_VARIABLE_GUID, "BootNext", validate_uint16 },
+	{ EFI_GLOBAL_VARIABLE_GUID, "BootOrder", validate_boot_order },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Boot*", validate_load_option },
+	{ EFI_GLOBAL_VARIABLE_GUID, "DriverOrder", validate_boot_order },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Driver*", validate_load_option },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConIn", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConInDev", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConOut", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConOutDev", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ErrOut", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ErrOutDev", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Lang", validate_ascii_string },
+	{ EFI_GLOBAL_VARIABLE_GUID, "PlatformLang", validate_ascii_string },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Timeout", validate_uint16 },
+	{ NULL_GUID, "", NULL },
 };
 
 bool
-efivar_validate(efi_char16_t *var_name, u8 *data, unsigned long data_size)
+efivar_validate(efi_guid_t vendor, efi_char16_t *var_name, u8 *data,
+		unsigned long data_size)
 {
 	int i;
 	unsigned long utf8_size;
@@ -203,9 +214,12 @@ efivar_validate(efi_char16_t *var_name, u8 *data, unsigned long data_size)
 	ucs2_as_utf8(utf8_name, var_name, utf8_size);
 	utf8_name[utf8_size] = '\0';
 
-	for (i = 0; variable_validate[i].validate != NULL; i++) {
+	for (i = 0; variable_validate[i].name[0] != '\0'; i++) {
 		const char *name = variable_validate[i].name;
-		int match;
+		int match = 0;
+
+		if (efi_guidcmp(vendor, variable_validate[i].vendor))
+			continue;
 
 		for (match = 0; ; match++) {
 			char c = name[match];
@@ -815,7 +829,7 @@ int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes,
 
 	*set = false;
 
-	if (efivar_validate(name, data, *size) == false)
+	if (efivar_validate(*vendor, name, data, *size) == false)
 		return -EINVAL;
 
 	/*
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 68a4410fc9e6..49582e8a4680 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -836,7 +836,8 @@ int efivar_entry_iter(int (*func)(struct efivar_entry *, void *),
 struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid,
 				       struct list_head *head, bool remove);
 
-bool efivar_validate(efi_char16_t *var_name, u8 *data, unsigned long len);
+bool efivar_validate(efi_guid_t vendor, efi_char16_t *var_name, u8 *data,
+		     unsigned long data_size);
 
 extern struct work_struct efivar_work;
 void efivar_run_worker(void);
-- 
2.7.3

[PATCH 3.12 49/58] efi: Make efivarfs entries immutable by default

[Jiri Slaby]

From: Peter Jones <pjones@redhat.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit ed8b0de5a33d2a2557dce7f9429dca8cb5bc5879 upstream.

"rm -rf" is bricking some peoples' laptops because of variables being
used to store non-reinitializable firmware driver data that's required
to POST the hardware.

These are 100% bugs, and they need to be fixed, but in the mean time it
shouldn't be easy to *accidentally* brick machines.

We have to have delete working, and picking which variables do and don't
work for deletion is quite intractable, so instead make everything
immutable by default (except for a whitelist), and make tools that
aren't quite so broad-spectrum unset the immutable flag.

Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 Documentation/filesystems/efivarfs.txt         |  7 +++
 drivers/firmware/efi/vars.c                    | 87 +++++++++++++++++++-------
 fs/efivarfs/file.c                             | 71 +++++++++++++++++++++
 fs/efivarfs/inode.c                            | 30 +++++----
 fs/efivarfs/internal.h                         |  3 +-
 fs/efivarfs/super.c                            |  9 ++-
 include/linux/efi.h                            |  2 +
 tools/testing/selftests/efivarfs/efivarfs.sh   | 19 +++++-
 tools/testing/selftests/efivarfs/open-unlink.c | 72 ++++++++++++++++++++-
 9 files changed, 259 insertions(+), 41 deletions(-)

diff --git a/Documentation/filesystems/efivarfs.txt b/Documentation/filesystems/efivarfs.txt
index c477af086e65..686a64bba775 100644
--- a/Documentation/filesystems/efivarfs.txt
+++ b/Documentation/filesystems/efivarfs.txt
@@ -14,3 +14,10 @@ filesystem.
 efivarfs is typically mounted like this,
 
 	mount -t efivarfs none /sys/firmware/efi/efivars
+
+Due to the presence of numerous firmware bugs where removing non-standard
+UEFI variables causes the system firmware to fail to POST, efivarfs
+files that are not well-known standardized variables are created
+as immutable files.  This doesn't prevent removal - "chattr -i" will work -
+but it does prevent this kind of failure from being accomplished
+accidentally.
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index ce0ead43f7e1..ab68e57172aa 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -172,10 +172,12 @@ struct variable_validate {
 };
 
 /*
- * This is the list of variables we need to validate.
+ * This is the list of variables we need to validate, as well as the
+ * whitelist for what we think is safe not to default to immutable.
  *
  * If it has a validate() method that's not NULL, it'll go into the
- * validation routine.  If not, it is assumed valid.
+ * validation routine.  If not, it is assumed valid, but still used for
+ * whitelisting.
  *
  * Note that it's sorted by {vendor,name}, but globbed names must come after
  * any other name with the same prefix.
@@ -193,11 +195,37 @@ static const struct variable_validate variable_validate[] = {
 	{ EFI_GLOBAL_VARIABLE_GUID, "ErrOut", validate_device_path },
 	{ EFI_GLOBAL_VARIABLE_GUID, "ErrOutDev", validate_device_path },
 	{ EFI_GLOBAL_VARIABLE_GUID, "Lang", validate_ascii_string },
+	{ EFI_GLOBAL_VARIABLE_GUID, "OsIndications", NULL },
 	{ EFI_GLOBAL_VARIABLE_GUID, "PlatformLang", validate_ascii_string },
 	{ EFI_GLOBAL_VARIABLE_GUID, "Timeout", validate_uint16 },
 	{ NULL_GUID, "", NULL },
 };
 
+static bool
+variable_matches(const char *var_name, size_t len, const char *match_name,
+		 int *match)
+{
+	for (*match = 0; ; (*match)++) {
+		char c = match_name[*match];
+		char u = var_name[*match];
+
+		/* Wildcard in the matching name means we've matched */
+		if (c == '*')
+			return true;
+
+		/* Case sensitive match */
+		if (!c && *match == len)
+			return true;
+
+		if (c != u)
+			return false;
+
+		if (!c)
+			return true;
+	}
+	return true;
+}
+
 bool
 efivar_validate(efi_guid_t vendor, efi_char16_t *var_name, u8 *data,
 		unsigned long data_size)
@@ -221,35 +249,48 @@ efivar_validate(efi_guid_t vendor, efi_char16_t *var_name, u8 *data,
 		if (efi_guidcmp(vendor, variable_validate[i].vendor))
 			continue;
 
-		for (match = 0; ; match++) {
-			char c = name[match];
-			char u = utf8_name[match];
-
-			/* Wildcard in the matching name means we've matched */
-			if (c == '*') {
-				kfree(utf8_name);
-				return variable_validate[i].validate(var_name,
-							match, data, data_size);
-			}
-
-			/* Case sensitive match */
-			if (c != u)
+		if (variable_matches(utf8_name, utf8_size+1, name, &match)) {
+			if (variable_validate[i].validate == NULL)
 				break;
-
-			/* Reached the end of the string while matching */
-			if (!c) {
-				kfree(utf8_name);
-				return variable_validate[i].validate(var_name,
-							match, data, data_size);
-			}
+			kfree(utf8_name);
+			return variable_validate[i].validate(var_name, match,
+							     data, data_size);
 		}
 	}
-
 	kfree(utf8_name);
 	return true;
 }
 EXPORT_SYMBOL_GPL(efivar_validate);
 
+bool
+efivar_variable_is_removable(efi_guid_t vendor, const char *var_name,
+			     size_t len)
+{
+	int i;
+	bool found = false;
+	int match = 0;
+
+	/*
+	 * Check if our variable is in the validated variables list
+	 */
+	for (i = 0; variable_validate[i].name[0] != '\0'; i++) {
+		if (efi_guidcmp(variable_validate[i].vendor, vendor))
+			continue;
+
+		if (variable_matches(var_name, len,
+				     variable_validate[i].name, &match)) {
+			found = true;
+			break;
+		}
+	}
+
+	/*
+	 * If it's in our list, it is removable.
+	 */
+	return found;
+}
+EXPORT_SYMBOL_GPL(efivar_variable_is_removable);
+
 static efi_status_t
 check_var_size(u32 attributes, unsigned long size)
 {
diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c
index 8dd524f32284..08f105a06fbf 100644
--- a/fs/efivarfs/file.c
+++ b/fs/efivarfs/file.c
@@ -10,6 +10,7 @@
 #include <linux/efi.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/mount.h>
 
 #include "internal.h"
 
@@ -108,9 +109,79 @@ out_free:
 	return size;
 }
 
+static int
+efivarfs_ioc_getxflags(struct file *file, void __user *arg)
+{
+	struct inode *inode = file->f_mapping->host;
+	unsigned int i_flags;
+	unsigned int flags = 0;
+
+	i_flags = inode->i_flags;
+	if (i_flags & S_IMMUTABLE)
+		flags |= FS_IMMUTABLE_FL;
+
+	if (copy_to_user(arg, &flags, sizeof(flags)))
+		return -EFAULT;
+	return 0;
+}
+
+static int
+efivarfs_ioc_setxflags(struct file *file, void __user *arg)
+{
+	struct inode *inode = file->f_mapping->host;
+	unsigned int flags;
+	unsigned int i_flags = 0;
+	int error;
+
+	if (!inode_owner_or_capable(inode))
+		return -EACCES;
+
+	if (copy_from_user(&flags, arg, sizeof(flags)))
+		return -EFAULT;
+
+	if (flags & ~FS_IMMUTABLE_FL)
+		return -EOPNOTSUPP;
+
+	if (!capable(CAP_LINUX_IMMUTABLE))
+		return -EPERM;
+
+	if (flags & FS_IMMUTABLE_FL)
+		i_flags |= S_IMMUTABLE;
+
+
+	error = mnt_want_write_file(file);
+	if (error)
+		return error;
+
+	mutex_lock(&inode->i_mutex);
+	inode->i_flags &= ~S_IMMUTABLE;
+	inode->i_flags |= i_flags;
+	mutex_unlock(&inode->i_mutex);
+
+	mnt_drop_write_file(file);
+
+	return 0;
+}
+
+long
+efivarfs_file_ioctl(struct file *file, unsigned int cmd, unsigned long p)
+{
+	void __user *arg = (void __user *)p;
+
+	switch (cmd) {
+	case FS_IOC_GETFLAGS:
+		return efivarfs_ioc_getxflags(file, arg);
+	case FS_IOC_SETFLAGS:
+		return efivarfs_ioc_setxflags(file, arg);
+	}
+
+	return -ENOTTY;
+}
+
 const struct file_operations efivarfs_file_operations = {
 	.open	= simple_open,
 	.read	= efivarfs_file_read,
 	.write	= efivarfs_file_write,
 	.llseek	= no_llseek,
+	.unlocked_ioctl = efivarfs_file_ioctl,
 };
diff --git a/fs/efivarfs/inode.c b/fs/efivarfs/inode.c
index 07ab49745e31..7e7318f10575 100644
--- a/fs/efivarfs/inode.c
+++ b/fs/efivarfs/inode.c
@@ -15,7 +15,8 @@
 #include "internal.h"
 
 struct inode *efivarfs_get_inode(struct super_block *sb,
-				const struct inode *dir, int mode, dev_t dev)
+				const struct inode *dir, int mode,
+				dev_t dev, bool is_removable)
 {
 	struct inode *inode = new_inode(sb);
 
@@ -23,6 +24,7 @@ struct inode *efivarfs_get_inode(struct super_block *sb,
 		inode->i_ino = get_next_ino();
 		inode->i_mode = mode;
 		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+		inode->i_flags = is_removable ? 0 : S_IMMUTABLE;
 		switch (mode & S_IFMT) {
 		case S_IFREG:
 			inode->i_fop = &efivarfs_file_operations;
@@ -102,22 +104,17 @@ static void efivarfs_hex_to_guid(const char *str, efi_guid_t *guid)
 static int efivarfs_create(struct inode *dir, struct dentry *dentry,
 			  umode_t mode, bool excl)
 {
-	struct inode *inode;
+	struct inode *inode = NULL;
 	struct efivar_entry *var;
 	int namelen, i = 0, err = 0;
+	bool is_removable = false;
 
 	if (!efivarfs_valid_name(dentry->d_name.name, dentry->d_name.len))
 		return -EINVAL;
 
-	inode = efivarfs_get_inode(dir->i_sb, dir, mode, 0);
-	if (!inode)
-		return -ENOMEM;
-
 	var = kzalloc(sizeof(struct efivar_entry), GFP_KERNEL);
-	if (!var) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!var)
+		return -ENOMEM;
 
 	/* length of the variable name itself: remove GUID and separator */
 	namelen = dentry->d_name.len - EFI_VARIABLE_GUID_LEN - 1;
@@ -125,6 +122,16 @@ static int efivarfs_create(struct inode *dir, struct dentry *dentry,
 	efivarfs_hex_to_guid(dentry->d_name.name + namelen + 1,
 			&var->var.VendorGuid);
 
+	if (efivar_variable_is_removable(var->var.VendorGuid,
+					 dentry->d_name.name, namelen))
+		is_removable = true;
+
+	inode = efivarfs_get_inode(dir->i_sb, dir, mode, 0, is_removable);
+	if (!inode) {
+		err = -ENOMEM;
+		goto out;
+	}
+
 	for (i = 0; i < namelen; i++)
 		var->var.VariableName[i] = dentry->d_name.name[i];
 
@@ -138,7 +145,8 @@ static int efivarfs_create(struct inode *dir, struct dentry *dentry,
 out:
 	if (err) {
 		kfree(var);
-		iput(inode);
+		if (inode)
+			iput(inode);
 	}
 	return err;
 }
diff --git a/fs/efivarfs/internal.h b/fs/efivarfs/internal.h
index b5ff16addb7c..b4505188e799 100644
--- a/fs/efivarfs/internal.h
+++ b/fs/efivarfs/internal.h
@@ -15,7 +15,8 @@ extern const struct file_operations efivarfs_file_operations;
 extern const struct inode_operations efivarfs_dir_inode_operations;
 extern bool efivarfs_valid_name(const char *str, int len);
 extern struct inode *efivarfs_get_inode(struct super_block *sb,
-			const struct inode *dir, int mode, dev_t dev);
+			const struct inode *dir, int mode, dev_t dev,
+			bool is_removable);
 
 extern struct list_head efivarfs_list;
 
diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c
index d4918a056504..a2ba231e0b67 100644
--- a/fs/efivarfs/super.c
+++ b/fs/efivarfs/super.c
@@ -129,6 +129,7 @@ static int efivarfs_callback(efi_char16_t *name16, efi_guid_t vendor,
 	char *name;
 	int len;
 	int err = -ENOMEM;
+	bool is_removable = false;
 
 	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry)
@@ -146,13 +147,17 @@ static int efivarfs_callback(efi_char16_t *name16, efi_guid_t vendor,
 
 	ucs2_as_utf8(name, entry->var.VariableName, len);
 
+	if (efivar_variable_is_removable(entry->var.VendorGuid, name, len))
+		is_removable = true;
+
 	name[len] = '-';
 
 	efi_guid_unparse(&entry->var.VendorGuid, name + len + 1);
 
 	name[len + EFI_VARIABLE_GUID_LEN+1] = '\0';
 
-	inode = efivarfs_get_inode(sb, root->d_inode, S_IFREG | 0644, 0);
+	inode = efivarfs_get_inode(sb, root->d_inode, S_IFREG | 0644, 0,
+				   is_removable);
 	if (!inode)
 		goto fail_name;
 
@@ -208,7 +213,7 @@ static int efivarfs_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_d_op		= &efivarfs_d_ops;
 	sb->s_time_gran         = 1;
 
-	inode = efivarfs_get_inode(sb, NULL, S_IFDIR | 0755, 0);
+	inode = efivarfs_get_inode(sb, NULL, S_IFDIR | 0755, 0, true);
 	if (!inode)
 		return -ENOMEM;
 	inode->i_op = &efivarfs_dir_inode_operations;
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 49582e8a4680..f38969a074ff 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -838,6 +838,8 @@ struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid,
 
 bool efivar_validate(efi_guid_t vendor, efi_char16_t *var_name, u8 *data,
 		     unsigned long data_size);
+bool efivar_variable_is_removable(efi_guid_t vendor, const char *name,
+				  size_t len);
 
 extern struct work_struct efivar_work;
 void efivar_run_worker(void);
diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh
index 77edcdcc016b..057278448515 100644
--- a/tools/testing/selftests/efivarfs/efivarfs.sh
+++ b/tools/testing/selftests/efivarfs/efivarfs.sh
@@ -88,7 +88,11 @@ test_delete()
 		exit 1
 	fi
 
-	rm $file
+	rm $file 2>/dev/null
+	if [ $? -ne 0 ]; then
+		chattr -i $file
+		rm $file
+	fi
 
 	if [ -e $file ]; then
 		echo "$file couldn't be deleted" >&2
@@ -111,6 +115,7 @@ test_zero_size_delete()
 		exit 1
 	fi
 
+	chattr -i $file
 	printf "$attrs" > $file
 
 	if [ -e $file ]; then
@@ -141,7 +146,11 @@ test_valid_filenames()
 			echo "$file could not be created" >&2
 			ret=1
 		else
-			rm $file
+			rm $file 2>/dev/null
+			if [ $? -ne 0 ]; then
+				chattr -i $file
+				rm $file
+			fi
 		fi
 	done
 
@@ -174,7 +183,11 @@ test_invalid_filenames()
 
 		if [ -e $file ]; then
 			echo "Creating $file should have failed" >&2
-			rm $file
+			rm $file 2>/dev/null
+			if [ $? -ne 0 ]; then
+				chattr -i $file
+				rm $file
+			fi
 			ret=1
 		fi
 	done
diff --git a/tools/testing/selftests/efivarfs/open-unlink.c b/tools/testing/selftests/efivarfs/open-unlink.c
index 8c0764407b3c..4af74f733036 100644
--- a/tools/testing/selftests/efivarfs/open-unlink.c
+++ b/tools/testing/selftests/efivarfs/open-unlink.c
@@ -1,10 +1,68 @@
+#include <errno.h>
 #include <stdio.h>
 #include <stdint.h>
 #include <stdlib.h>
 #include <unistd.h>
+#include <sys/ioctl.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <fcntl.h>
+#include <linux/fs.h>
+
+static int set_immutable(const char *path, int immutable)
+{
+	unsigned int flags;
+	int fd;
+	int rc;
+	int error;
+
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		return fd;
+
+	rc = ioctl(fd, FS_IOC_GETFLAGS, &flags);
+	if (rc < 0) {
+		error = errno;
+		close(fd);
+		errno = error;
+		return rc;
+	}
+
+	if (immutable)
+		flags |= FS_IMMUTABLE_FL;
+	else
+		flags &= ~FS_IMMUTABLE_FL;
+
+	rc = ioctl(fd, FS_IOC_SETFLAGS, &flags);
+	error = errno;
+	close(fd);
+	errno = error;
+	return rc;
+}
+
+static int get_immutable(const char *path)
+{
+	unsigned int flags;
+	int fd;
+	int rc;
+	int error;
+
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		return fd;
+
+	rc = ioctl(fd, FS_IOC_GETFLAGS, &flags);
+	if (rc < 0) {
+		error = errno;
+		close(fd);
+		errno = error;
+		return rc;
+	}
+	close(fd);
+	if (flags & FS_IMMUTABLE_FL)
+		return 1;
+	return 0;
+}
 
 int main(int argc, char **argv)
 {
@@ -27,7 +85,7 @@ int main(int argc, char **argv)
 	buf[4] = 0;
 
 	/* create a test variable */
-	fd = open(path, O_WRONLY | O_CREAT);
+	fd = open(path, O_WRONLY | O_CREAT, 0600);
 	if (fd < 0) {
 		perror("open(O_WRONLY)");
 		return EXIT_FAILURE;
@@ -41,6 +99,18 @@ int main(int argc, char **argv)
 
 	close(fd);
 
+	rc = get_immutable(path);
+	if (rc < 0) {
+		perror("ioctl(FS_IOC_GETFLAGS)");
+		return EXIT_FAILURE;
+	} else if (rc) {
+		rc = set_immutable(path, 0);
+		if (rc < 0) {
+			perror("ioctl(FS_IOC_SETFLAGS)");
+			return EXIT_FAILURE;
+		}
+	}
+
 	fd = open(path, O_RDONLY);
 	if (fd < 0) {
 		perror("open");
-- 
2.7.3

[PATCH 3.12 50/58] efi: Add pstore variables to the deletion whitelist

[Jiri Slaby]

From: Matt Fleming <matt@codeblueprint.co.uk>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit e246eb568bc4cbbdd8a30a3c11151ff9b7ca7312 upstream.

Laszlo explains why this is a good idea,

 'This is because the pstore filesystem can be backed by UEFI variables,
  and (for example) a crash might dump the last kilobytes of the dmesg
  into a number of pstore entries, each entry backed by a separate UEFI
  variable in the above GUID namespace, and with a variable name
  according to the above pattern.

  Please see "drivers/firmware/efi/efi-pstore.c".

  While this patch series will not prevent the user from deleting those
  UEFI variables via the pstore filesystem (i.e., deleting a pstore fs
  entry will continue to delete the backing UEFI variable), I think it
  would be nice to preserve the possibility for the sysadmin to delete
  Linux-created UEFI variables that carry portions of the crash log,
  *without* having to mount the pstore filesystem.'

There's also no chance of causing machines to become bricked by
deleting these variables, which is the whole purpose of excluding
things from the whitelist.

Use the LINUX_EFI_CRASH_GUID guid and a wildcard '*' for the match so
that we don't have to update the string in the future if new variable
name formats are created for crash dump variables.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Tested-by: Peter Jones <pjones@redhat.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/firmware/efi/vars.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
index ab68e57172aa..4e2f46938bf0 100644
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -198,6 +198,7 @@ static const struct variable_validate variable_validate[] = {
 	{ EFI_GLOBAL_VARIABLE_GUID, "OsIndications", NULL },
 	{ EFI_GLOBAL_VARIABLE_GUID, "PlatformLang", validate_ascii_string },
 	{ EFI_GLOBAL_VARIABLE_GUID, "Timeout", validate_uint16 },
+	{ LINUX_EFI_CRASH_GUID, "*", NULL },
 	{ NULL_GUID, "", NULL },
 };
 
-- 
2.7.3

[PATCH 3.12 51/58] lib/ucs2_string: Correct ucs2 -> utf8 conversion

[Jiri Slaby]

From: Jason Andryuk <jandryuk@gmail.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit a68075908a37850918ad96b056acc9ac4ce1bd90 upstream.

The comparisons should be >= since 0x800 and 0x80 require an additional bit
to store.

For the 3 byte case, the existing shift would drop off 2 more bits than
intended.

For the 2 byte case, there should be 5 bits bits in byte 1, and 6 bits in
byte 2.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Matthew Garrett <mjg59@coreos.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 lib/ucs2_string.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/lib/ucs2_string.c b/lib/ucs2_string.c
index 17dd74e21ef9..f0b323abb4c6 100644
--- a/lib/ucs2_string.c
+++ b/lib/ucs2_string.c
@@ -59,9 +59,9 @@ ucs2_utf8size(const ucs2_char_t *src)
 	for (i = 0; i < ucs2_strlen(src); i++) {
 		u16 c = src[i];
 
-		if (c > 0x800)
+		if (c >= 0x800)
 			j += 3;
-		else if (c > 0x80)
+		else if (c >= 0x80)
 			j += 2;
 		else
 			j += 1;
@@ -88,19 +88,19 @@ ucs2_as_utf8(u8 *dest, const ucs2_char_t *src, unsigned long maxlength)
 	for (i = 0; maxlength && i < limit; i++) {
 		u16 c = src[i];
 
-		if (c > 0x800) {
+		if (c >= 0x800) {
 			if (maxlength < 3)
 				break;
 			maxlength -= 3;
 			dest[j++] = 0xe0 | (c & 0xf000) >> 12;
-			dest[j++] = 0x80 | (c & 0x0fc0) >> 8;
+			dest[j++] = 0x80 | (c & 0x0fc0) >> 6;
 			dest[j++] = 0x80 | (c & 0x003f);
-		} else if (c > 0x80) {
+		} else if (c >= 0x80) {
 			if (maxlength < 2)
 				break;
 			maxlength -= 2;
-			dest[j++] = 0xc0 | (c & 0xfe0) >> 5;
-			dest[j++] = 0x80 | (c & 0x01f);
+			dest[j++] = 0xc0 | (c & 0x7c0) >> 6;
+			dest[j++] = 0x80 | (c & 0x03f);
 		} else {
 			maxlength -= 1;
 			dest[j++] = c & 0x7f;
-- 
2.7.3

[PATCH 3.12 52/58] modules: fix longstanding /proc/kallsyms vs module insertion race.

[Jiri Slaby]

From: Rusty Russell <rusty@rustcorp.com.au>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 8244062ef1e54502ef55f54cced659913f244c3e upstream.

For CONFIG_KALLSYMS, we keep two symbol tables and two string tables.
There's one full copy, marked SHF_ALLOC and laid out at the end of the
module's init section.  There's also a cut-down version that only
contains core symbols and strings, and lives in the module's core
section.

After module init (and before we free the module memory), we switch
the mod->symtab, mod->num_symtab and mod->strtab to point to the core
versions.  We do this under the module_mutex.

However, kallsyms doesn't take the module_mutex: it uses
preempt_disable() and rcu tricks to walk through the modules, because
it's used in the oops path.  It's also used in /proc/kallsyms.
There's nothing atomic about the change of these variables, so we can
get the old (larger!) num_symtab and the new symtab pointer; in fact
this is what I saw when trying to reproduce.

By grouping these variables together, we can use a
carefully-dereferenced pointer to ensure we always get one or the
other (the free of the module init section is already done in an RCU
callback, so that's safe).  We allocate the init one at the end of the
module init section, and keep the core one inside the struct module
itself (it could also have been allocated at the end of the module
core, but that's probably overkill).

[ Rebased for 4.4-stable and older, because the following changes aren't
  in the older trees:
  - e0224418516b4d8a6c2160574bac18447c354ef0: adds arg to is_core_symbol
  - 7523e4dc5057e157212b4741abd6256e03404cf1: module_init/module_core/init_size/core_size
    become init_layout.base/core_layout.base/init_layout.size/core_layout.size.

  Original commit: 8244062ef1e54502ef55f54cced659913f244c3e
]

Reported-by: Weilong Chen <chenweilong@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 include/linux/module.h |  17 ++++----
 kernel/module.c        | 111 ++++++++++++++++++++++++++++++-------------------
 2 files changed, 78 insertions(+), 50 deletions(-)

diff --git a/include/linux/module.h b/include/linux/module.h
index 73c8c06c25bf..842ef3877d5b 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -223,6 +223,12 @@ struct module_ref {
 	unsigned long decs;
 } __attribute((aligned(2 * sizeof(unsigned long))));
 
+struct mod_kallsyms {
+	Elf_Sym *symtab;
+	unsigned int num_symtab;
+	char *strtab;
+};
+
 struct module
 {
 	enum module_state state;
@@ -311,14 +317,9 @@ struct module
 #endif
 
 #ifdef CONFIG_KALLSYMS
-	/*
-	 * We keep the symbol and string tables for kallsyms.
-	 * The core_* fields below are temporary, loader-only (they
-	 * could really be discarded after module init).
-	 */
-	Elf_Sym *symtab, *core_symtab;
-	unsigned int num_symtab, core_num_syms;
-	char *strtab, *core_strtab;
+	/* Protected by RCU and/or module_mutex: use rcu_dereference() */
+	struct mod_kallsyms *kallsyms;
+	struct mod_kallsyms core_kallsyms;
 
 	/* Section attributes */
 	struct module_sect_attrs *sect_attrs;
diff --git a/kernel/module.c b/kernel/module.c
index cb56e581062d..ec40f03aa473 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -180,6 +180,9 @@ struct load_info {
 	struct _ddebug *debug;
 	unsigned int num_debug;
 	bool sig_ok;
+#ifdef CONFIG_KALLSYMS
+	unsigned long mod_kallsyms_init_off;
+#endif
 	struct {
 		unsigned int sym, str, mod, vers, info, pcpu;
 	} index;
@@ -2362,8 +2365,20 @@ static void layout_symtab(struct module *mod, struct load_info *info)
 	strsect->sh_entsize = get_offset(mod, &mod->init_size, strsect,
 					 info->index.str) | INIT_OFFSET_MASK;
 	pr_debug("\t%s\n", info->secstrings + strsect->sh_name);
+
+	/* We'll tack temporary mod_kallsyms on the end. */
+	mod->init_size = ALIGN(mod->init_size,
+			       __alignof__(struct mod_kallsyms));
+	info->mod_kallsyms_init_off = mod->init_size;
+	mod->init_size += sizeof(struct mod_kallsyms);
+	mod->init_size = debug_align(mod->init_size);
 }
 
+/*
+ * We use the full symtab and strtab which layout_symtab arranged to
+ * be appended to the init section.  Later we switch to the cut-down
+ * core-only ones.
+ */
 static void add_kallsyms(struct module *mod, const struct load_info *info)
 {
 	unsigned int i, ndst;
@@ -2372,28 +2387,33 @@ static void add_kallsyms(struct module *mod, const struct load_info *info)
 	char *s;
 	Elf_Shdr *symsec = &info->sechdrs[info->index.sym];
 
-	mod->symtab = (void *)symsec->sh_addr;
-	mod->num_symtab = symsec->sh_size / sizeof(Elf_Sym);
+	/* Set up to point into init section. */
+	mod->kallsyms = mod->module_init + info->mod_kallsyms_init_off;
+
+	mod->kallsyms->symtab = (void *)symsec->sh_addr;
+	mod->kallsyms->num_symtab = symsec->sh_size / sizeof(Elf_Sym);
 	/* Make sure we get permanent strtab: don't use info->strtab. */
-	mod->strtab = (void *)info->sechdrs[info->index.str].sh_addr;
+	mod->kallsyms->strtab = (void *)info->sechdrs[info->index.str].sh_addr;
 
 	/* Set types up while we still have access to sections. */
-	for (i = 0; i < mod->num_symtab; i++)
-		mod->symtab[i].st_info = elf_type(&mod->symtab[i], info);
-
-	mod->core_symtab = dst = mod->module_core + info->symoffs;
-	mod->core_strtab = s = mod->module_core + info->stroffs;
-	src = mod->symtab;
-	for (ndst = i = 0; i < mod->num_symtab; i++) {
+	for (i = 0; i < mod->kallsyms->num_symtab; i++)
+		mod->kallsyms->symtab[i].st_info
+			= elf_type(&mod->kallsyms->symtab[i], info);
+
+	/* Now populate the cut down core kallsyms for after init. */
+	mod->core_kallsyms.symtab = dst = mod->module_core + info->symoffs;
+	mod->core_kallsyms.strtab = s = mod->module_core + info->stroffs;
+	src = mod->kallsyms->symtab;
+	for (ndst = i = 0; i < mod->kallsyms->num_symtab; i++) {
 		if (i == 0 ||
 		    is_core_symbol(src+i, info->sechdrs, info->hdr->e_shnum)) {
 			dst[ndst] = src[i];
-			dst[ndst++].st_name = s - mod->core_strtab;
-			s += strlcpy(s, &mod->strtab[src[i].st_name],
+			dst[ndst++].st_name = s - mod->core_kallsyms.strtab;
+			s += strlcpy(s, &mod->kallsyms->strtab[src[i].st_name],
 				     KSYM_NAME_LEN) + 1;
 		}
 	}
-	mod->core_num_syms = ndst;
+	mod->core_kallsyms.num_symtab = ndst;
 }
 #else
 static inline void layout_symtab(struct module *mod, struct load_info *info)
@@ -3107,9 +3127,8 @@ static int do_init_module(struct module *mod)
 	module_put(mod);
 	trim_init_extable(mod);
 #ifdef CONFIG_KALLSYMS
-	mod->num_symtab = mod->core_num_syms;
-	mod->symtab = mod->core_symtab;
-	mod->strtab = mod->core_strtab;
+	/* Switch to core kallsyms now init is done: kallsyms may be walking! */
+	rcu_assign_pointer(mod->kallsyms, &mod->core_kallsyms);
 #endif
 	unset_module_init_ro_nx(mod);
 	module_free(mod, mod->module_init);
@@ -3425,9 +3444,9 @@ static inline int is_arm_mapping_symbol(const char *str)
 	       && (str[2] == '\0' || str[2] == '.');
 }
 
-static const char *symname(struct module *mod, unsigned int symnum)
+static const char *symname(struct mod_kallsyms *kallsyms, unsigned int symnum)
 {
-	return mod->strtab + mod->symtab[symnum].st_name;
+	return kallsyms->strtab + kallsyms->symtab[symnum].st_name;
 }
 
 static const char *get_ksymbol(struct module *mod,
@@ -3437,6 +3456,7 @@ static const char *get_ksymbol(struct module *mod,
 {
 	unsigned int i, best = 0;
 	unsigned long nextval;
+	struct mod_kallsyms *kallsyms = rcu_dereference_sched(mod->kallsyms);
 
 	/* At worse, next value is at end of module */
 	if (within_module_init(addr, mod))
@@ -3446,32 +3466,32 @@ static const char *get_ksymbol(struct module *mod,
 
 	/* Scan for closest preceding symbol, and next symbol. (ELF
 	   starts real symbols at 1). */
-	for (i = 1; i < mod->num_symtab; i++) {
-		if (mod->symtab[i].st_shndx == SHN_UNDEF)
+	for (i = 1; i < kallsyms->num_symtab; i++) {
+		if (kallsyms->symtab[i].st_shndx == SHN_UNDEF)
 			continue;
 
 		/* We ignore unnamed symbols: they're uninformative
 		 * and inserted at a whim. */
-		if (*symname(mod, i) == '\0'
-		    || is_arm_mapping_symbol(symname(mod, i)))
+		if (*symname(kallsyms, i) == '\0'
+		    || is_arm_mapping_symbol(symname(kallsyms, i)))
 			continue;
 
-		if (mod->symtab[i].st_value <= addr
-		    && mod->symtab[i].st_value > mod->symtab[best].st_value)
+		if (kallsyms->symtab[i].st_value <= addr
+		    && kallsyms->symtab[i].st_value > kallsyms->symtab[best].st_value)
 			best = i;
-		if (mod->symtab[i].st_value > addr
-		    && mod->symtab[i].st_value < nextval)
-			nextval = mod->symtab[i].st_value;
+		if (kallsyms->symtab[i].st_value > addr
+		    && kallsyms->symtab[i].st_value < nextval)
+			nextval = kallsyms->symtab[i].st_value;
 	}
 
 	if (!best)
 		return NULL;
 
 	if (size)
-		*size = nextval - mod->symtab[best].st_value;
+		*size = nextval - kallsyms->symtab[best].st_value;
 	if (offset)
-		*offset = addr - mod->symtab[best].st_value;
-	return symname(mod, best);
+		*offset = addr - kallsyms->symtab[best].st_value;
+	return symname(kallsyms, best);
 }
 
 /* For kallsyms to ask for address resolution.  NULL means not found.  Careful
@@ -3567,18 +3587,21 @@ int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
 
 	preempt_disable();
 	list_for_each_entry_rcu(mod, &modules, list) {
+		struct mod_kallsyms *kallsyms;
+
 		if (mod->state == MODULE_STATE_UNFORMED)
 			continue;
-		if (symnum < mod->num_symtab) {
-			*value = mod->symtab[symnum].st_value;
-			*type = mod->symtab[symnum].st_info;
-			strlcpy(name, symname(mod, symnum), KSYM_NAME_LEN);
+		kallsyms = rcu_dereference_sched(mod->kallsyms);
+		if (symnum < kallsyms->num_symtab) {
+			*value = kallsyms->symtab[symnum].st_value;
+			*type = kallsyms->symtab[symnum].st_info;
+			strlcpy(name, symname(kallsyms, symnum), KSYM_NAME_LEN);
 			strlcpy(module_name, mod->name, MODULE_NAME_LEN);
 			*exported = is_exported(name, *value, mod);
 			preempt_enable();
 			return 0;
 		}
-		symnum -= mod->num_symtab;
+		symnum -= kallsyms->num_symtab;
 	}
 	preempt_enable();
 	return -ERANGE;
@@ -3587,11 +3610,12 @@ int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
 static unsigned long mod_find_symname(struct module *mod, const char *name)
 {
 	unsigned int i;
+	struct mod_kallsyms *kallsyms = rcu_dereference_sched(mod->kallsyms);
 
-	for (i = 0; i < mod->num_symtab; i++)
-		if (strcmp(name, symname(mod, i)) == 0 &&
-		    mod->symtab[i].st_info != 'U')
-			return mod->symtab[i].st_value;
+	for (i = 0; i < kallsyms->num_symtab; i++)
+		if (strcmp(name, symname(kallsyms, i)) == 0 &&
+		    kallsyms->symtab[i].st_info != 'U')
+			return kallsyms->symtab[i].st_value;
 	return 0;
 }
 
@@ -3628,11 +3652,14 @@ int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,
 	int ret;
 
 	list_for_each_entry(mod, &modules, list) {
+		/* We hold module_mutex: no need for rcu_dereference_sched */
+		struct mod_kallsyms *kallsyms = mod->kallsyms;
+
 		if (mod->state == MODULE_STATE_UNFORMED)
 			continue;
-		for (i = 0; i < mod->num_symtab; i++) {
-			ret = fn(data, symname(mod, i),
-				 mod, mod->symtab[i].st_value);
+		for (i = 0; i < kallsyms->num_symtab; i++) {
+			ret = fn(data, symname(kallsyms, i),
+				 mod, kallsyms->symtab[i].st_value);
 			if (ret != 0)
 				return ret;
 		}
-- 
2.7.3

[PATCH 3.12 53/58] xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled

[Jiri Slaby]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 56441f3c8e5bd45aab10dd9f8c505dd4bec03b0d upstream.

The guest sequence of:

 a) XEN_PCI_OP_enable_msi
 b) XEN_PCI_OP_enable_msi
 c) XEN_PCI_OP_disable_msi

results in hitting an BUG_ON condition in the msi.c code.

The MSI code uses an dev->msi_list to which it adds MSI entries.
Under the above conditions an BUG_ON() can be hit. The device
passed in the guest MUST have MSI capability.

The a) adds the entry to the dev->msi_list and sets msi_enabled.
The b) adds a second entry but adding in to SysFS fails (duplicate entry)
and deletes all of the entries from msi_list and returns (with msi_enabled
is still set).  c) pci_disable_msi passes the msi_enabled checks and hits:

BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));

and blows up.

The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard
against that. The check for msix_enabled is not stricly neccessary.

This is part of XSA-157.

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/xen/xen-pciback/pciback_ops.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 64eb0cd8b8af..37452734af98 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -144,7 +144,12 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev,
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI\n", pci_name(dev));
 
-	status = pci_enable_msi(dev);
+	if (dev->msi_enabled)
+		status = -EALREADY;
+	else if (dev->msix_enabled)
+		status = -ENXIO;
+	else
+		status = pci_enable_msi(dev);
 
 	if (status) {
 		pr_warn_ratelimited("%s: error enabling MSI for guest %u: err %d\n",
-- 
2.7.3

[PATCH 3.12 54/58] xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled

[Jiri Slaby]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 5e0ce1455c09dd61d029b8ad45d82e1ac0b6c4c9 upstream.

The guest sequence of:

  a) XEN_PCI_OP_enable_msix
  b) XEN_PCI_OP_enable_msix

results in hitting an NULL pointer due to using freed pointers.

The device passed in the guest MUST have MSI-X capability.

The a) constructs and SysFS representation of MSI and MSI groups.
The b) adds a second set of them but adding in to SysFS fails (duplicate entry).
'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that
in a) pdev->msi_irq_groups is still set) and also free's ALL of the
MSI-X entries of the device (the ones allocated in step a) and b)).

The unwind code: 'free_msi_irqs' deletes all the entries and tries to
delete the pdev->msi_irq_groups (which hasn't been set to NULL).
However the pointers in the SysFS are already freed and we hit an
NULL pointer further on when 'strlen' is attempted on a freed pointer.

The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard
against that. The check for msi_enabled is not stricly neccessary.

This is part of XSA-157

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/xen/xen-pciback/pciback_ops.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 37452734af98..32cbafcece76 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -206,9 +206,16 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n",
 		       pci_name(dev));
+
 	if (op->value > SH_INFO_MAX_VEC)
 		return -EINVAL;
 
+	if (dev->msix_enabled)
+		return -EALREADY;
+
+	if (dev->msi_enabled)
+		return -ENXIO;
+
 	entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL);
 	if (entries == NULL)
 		return -ENOMEM;
-- 
2.7.3

[PATCH 3.12 55/58] xen/pciback: Do not install an IRQ handler for MSI interrupts.

[Jiri Slaby]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit a396f3a210c3a61e94d6b87ec05a75d0be2a60d0 upstream.

Otherwise an guest can subvert the generic MSI code to trigger
an BUG_ON condition during MSI interrupt freeing:

 for (i = 0; i < entry->nvec_used; i++)
        BUG_ON(irq_has_action(entry->irq + i));

Xen PCI backed installs an IRQ handler (request_irq) for
the dev->irq whenever the guest writes PCI_COMMAND_MEMORY
(or PCI_COMMAND_IO) to the PCI_COMMAND register. This is
done in case the device has legacy interrupts the GSI line
is shared by the backend devices.

To subvert the backend the guest needs to make the backend
to change the dev->irq from the GSI to the MSI interrupt line,
make the backend allocate an interrupt handler, and then command
the backend to free the MSI interrupt and hit the BUG_ON.

Since the backend only calls 'request_irq' when the guest
writes to the PCI_COMMAND register the guest needs to call
XEN_PCI_OP_enable_msi before any other operation. This will
cause the generic MSI code to setup an MSI entry and
populate dev->irq with the new PIRQ value.

Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY
and cause the backend to setup an IRQ handler for dev->irq
(which instead of the GSI value has the MSI pirq). See
'xen_pcibk_control_isr'.

Then the guest disables the MSI: XEN_PCI_OP_disable_msi
which ends up triggering the BUG_ON condition in 'free_msi_irqs'
as there is an IRQ handler for the entry->irq (dev->irq).

Note that this cannot be done using MSI-X as the generic
code does not over-write dev->irq with the MSI-X PIRQ values.

The patch inhibits setting up the IRQ handler if MSI or
MSI-X (for symmetry reasons) code had been called successfully.

P.S.
Xen PCIBack when it sets up the device for the guest consumption
ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device).
XSA-120 addendum patch removed that - however when upstreaming said
addendum we found that it caused issues with qemu upstream. That
has now been fixed in qemu upstream.

This is part of XSA-157

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/xen/xen-pciback/pciback_ops.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 32cbafcece76..dc939671ba5f 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -70,6 +70,13 @@ static void xen_pcibk_control_isr(struct pci_dev *dev, int reset)
 		enable ? "enable" : "disable");
 
 	if (enable) {
+		/*
+		 * The MSI or MSI-X should not have an IRQ handler. Otherwise
+		 * if the guest terminates we BUG_ON in free_msi_irqs.
+		 */
+		if (dev->msi_enabled || dev->msix_enabled)
+			goto out;
+
 		rc = request_irq(dev_data->irq,
 				xen_pcibk_guest_interrupt, IRQF_SHARED,
 				dev_data->irq_name, dev);
-- 
2.7.3

[PATCH 3.12 56/58] xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled.

[Jiri Slaby]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 7cfb905b9638982862f0331b36ccaaca5d383b49 upstream.

Otherwise just continue on, returning the same values as
previously (return of 0, and op->result has the PIRQ value).

This does not change the behavior of XEN_PCI_OP_disable_msi[|x].

The pci_disable_msi or pci_disable_msix have the checks for
msi_enabled or msix_enabled so they will error out immediately.

However the guest can still call these operations and cause
us to disable the 'ack_intr'. That means the backend IRQ handler
for the legacy interrupt will not respond to interrupts anymore.

This will lead to (if the device is causing an interrupt storm)
for the Linux generic code to disable the interrupt line.

Naturally this will only happen if the device in question
is plugged in on the motherboard on shared level interrupt GSI.

This is part of XSA-157

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/xen/xen-pciback/pciback_ops.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index dc939671ba5f..2dddd370ef61 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -185,20 +185,23 @@ static
 int xen_pcibk_disable_msi(struct xen_pcibk_device *pdev,
 			  struct pci_dev *dev, struct xen_pci_op *op)
 {
-	struct xen_pcibk_dev_data *dev_data;
-
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: disable MSI\n",
 		       pci_name(dev));
-	pci_disable_msi(dev);
 
+	if (dev->msi_enabled) {
+		struct xen_pcibk_dev_data *dev_data;
+
+		pci_disable_msi(dev);
+
+		dev_data = pci_get_drvdata(dev);
+		if (dev_data)
+			dev_data->ack_intr = 1;
+	}
 	op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0;
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: MSI: %d\n", pci_name(dev),
 			op->value);
-	dev_data = pci_get_drvdata(dev);
-	if (dev_data)
-		dev_data->ack_intr = 1;
 	return 0;
 }
 
@@ -264,23 +267,27 @@ static
 int xen_pcibk_disable_msix(struct xen_pcibk_device *pdev,
 			   struct pci_dev *dev, struct xen_pci_op *op)
 {
-	struct xen_pcibk_dev_data *dev_data;
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: disable MSI-X\n",
 			pci_name(dev));
-	pci_disable_msix(dev);
 
+	if (dev->msix_enabled) {
+		struct xen_pcibk_dev_data *dev_data;
+
+		pci_disable_msix(dev);
+
+		dev_data = pci_get_drvdata(dev);
+		if (dev_data)
+			dev_data->ack_intr = 1;
+	}
 	/*
 	 * SR-IOV devices (which don't have any legacy IRQ) have
 	 * an undefined IRQ value of zero.
 	 */
 	op->value = dev->irq ? xen_pirq_from_irq(dev->irq) : 0;
 	if (unlikely(verbose_request))
-		printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n", pci_name(dev),
-			op->value);
-	dev_data = pci_get_drvdata(dev);
-	if (dev_data)
-		dev_data->ack_intr = 1;
+		printk(KERN_DEBUG DRV_NAME ": %s: MSI-X: %d\n",
+		       pci_name(dev), op->value);
 	return 0;
 }
 #endif
-- 
2.7.3

[PATCH 3.12 57/58] xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.

[Jiri Slaby]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 upstream.

commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way")
teaches us that dealing with MSI-X can be troublesome.

Further checks in the MSI-X architecture shows that if the
PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we
may not be able to access the BAR (since they are memory regions).

Since the MSI-X tables are located in there.. that can lead
to us causing PCIe errors. Inhibit us performing any
operation on the MSI-X unless the MEMORY bit is set.

Note that Xen hypervisor with:
"x86/MSI-X: access MSI-X table only after having enabled MSI-X"
will return:
xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3!

When the generic MSI code tries to setup the PIRQ without
MEMORY bit set. Which means with later versions of Xen
(4.6) this patch is not neccessary.

This is part of XSA-157

Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/xen/xen-pciback/pciback_ops.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 2dddd370ef61..1f6ee5a6f6ee 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -212,6 +212,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	struct xen_pcibk_dev_data *dev_data;
 	int i, result;
 	struct msix_entry *entries;
+	u16 cmd;
 
 	if (unlikely(verbose_request))
 		printk(KERN_DEBUG DRV_NAME ": %s: enable MSI-X\n",
@@ -223,7 +224,12 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	if (dev->msix_enabled)
 		return -EALREADY;
 
-	if (dev->msi_enabled)
+	/*
+	 * PCI_COMMAND_MEMORY must be enabled, otherwise we may not be able
+	 * to access the BARs where the MSI-X entries reside.
+	 */
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	if (dev->msi_enabled || !(cmd & PCI_COMMAND_MEMORY))
 		return -ENXIO;
 
 	entries = kmalloc(op->value * sizeof(*entries), GFP_KERNEL);
-- 
2.7.3

[PATCH 3.12 58/58] xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY

[Jiri Slaby]

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 8d47065f7d1980dde52abb874b301054f3013602 upstream.

Commit 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 (xen/pciback: Don't
allow MSI-X ops if PCI_COMMAND_MEMORY is not set) prevented enabling
MSI-X on passed-through virtual functions, because it checked the VF
for PCI_COMMAND_MEMORY but this is not a valid bit for VFs.

Instead, check the physical function for PCI_COMMAND_MEMORY.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/xen/xen-pciback/pciback_ops.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 1f6ee5a6f6ee..1199d147dcde 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -227,8 +227,9 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	/*
 	 * PCI_COMMAND_MEMORY must be enabled, otherwise we may not be able
 	 * to access the BARs where the MSI-X entries reside.
+	 * But VF devices are unique in which the PF needs to be checked.
 	 */
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	pci_read_config_word(pci_physfn(dev), PCI_COMMAND, &cmd);
 	if (dev->msi_enabled || !(cmd & PCI_COMMAND_MEMORY))
 		return -ENXIO;
 
-- 
2.7.3

Re: [PATCH 3.12 00/58] 3.12.57-stable review

[Shuah Khan]

On 03/16/2016 04:58 AM, Jiri Slaby wrote:
> This is the start of the stable review cycle for the 3.12.57 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Mar 18 10:38:57 CET 2016.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	http://kernel.org/pub/linux/kernel/people/jirislaby/stable-review/patch-3.12.57-rc1.xz
> and the diffstat can be found below.
> 

Compiled and booted on my test system. No dmesg regressions,

thanks,
-- Shuah

-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 3.12 00/58] 3.12.57-stable review

[Jiri Slaby]

On 03/16/2016, 04:41 PM, Shuah Khan wrote:
> On 03/16/2016 04:58 AM, Jiri Slaby wrote:
>> This is the start of the stable review cycle for the 3.12.57 release.
>> There are 58 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Fri Mar 18 10:38:57 CET 2016.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> 	http://kernel.org/pub/linux/kernel/people/jirislaby/stable-review/patch-3.12.57-rc1.xz
>> and the diffstat can be found below.
>>
> 
> Compiled and booted on my test system. No dmesg regressions,

Great, thanks!

-- 
js
suse labs

Re: [PATCH 3.12 00/58] 3.12.57-stable review

[Guenter Roeck]

On Wed, Mar 16, 2016 at 11:58:08AM +0100, Jiri Slaby wrote:
> This is the start of the stable review cycle for the 3.12.57 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Mar 18 10:38:57 CET 2016.
> Anything received after that time might be too late.
> 

Build results:
	total: 124 pass: 124 fail: 0
Qemu test results:
	total: 79 pass: 79 fail: 0

Details are available at http://kerneltests.org/builders.

One oddity: My build points to v3.12.56-53-g4eb8683, ie there are only 53
patches, not 58, in my build. A manual branch update did not change that.
Any idea what might cause that ?

I am picking up the changes from
git://git.kernel.org/pub/scm/linux/kernel/git/jirislaby/linux-stable.git,
branch stable-3.12-queue. Is that still correct ?

Thanks,
Guenter

Re: [PATCH 3.12 00/58] 3.12.57-stable review

[Jiri Slaby]

On 03/16/2016, 06:58 PM, Guenter Roeck wrote:
> One oddity: My build points to v3.12.56-53-g4eb8683, ie there are only 53
> patches, not 58, in my build. A manual branch update did not change that.
> Any idea what might cause that ?
> 
> I am picking up the changes from
> git://git.kernel.org/pub/scm/linux/kernel/git/jirislaby/linux-stable.git,
> branch stable-3.12-queue. Is that still correct ?

Oops, I forgot to push the qeueu, sorry. Now fixed.

thanks,
-- 
js
suse labs

Re: [PATCH 3.12 00/58] 3.12.57-stable review

[Guenter Roeck]

On 03/16/2016 11:16 AM, Jiri Slaby wrote:
> On 03/16/2016, 06:58 PM, Guenter Roeck wrote:
>> One oddity: My build points to v3.12.56-53-g4eb8683, ie there are only 53
>> patches, not 58, in my build. A manual branch update did not change that.
>> Any idea what might cause that ?
>>
>> I am picking up the changes from
>> git://git.kernel.org/pub/scm/linux/kernel/git/jirislaby/linux-stable.git,
>> branch stable-3.12-queue. Is that still correct ?
>
> Oops, I forgot to push the qeueu, sorry. Now fixed.
>

Now the build reference is v3.12.56-62-gceed939, but everything still builds fine,
so we should be ok.

Thanks,
Guenter

Re: [PATCH 3.12 00/58] 3.12.57-stable review

[Jiri Slaby]

On 03/17/2016, 04:23 AM, Guenter Roeck wrote:
> On 03/16/2016 11:16 AM, Jiri Slaby wrote:
>> On 03/16/2016, 06:58 PM, Guenter Roeck wrote:
>>> One oddity: My build points to v3.12.56-53-g4eb8683, ie there are
>>> only 53
>>> patches, not 58, in my build. A manual branch update did not change
>>> that.
>>> Any idea what might cause that ?
>>>
>>> I am picking up the changes from
>>> git://git.kernel.org/pub/scm/linux/kernel/git/jirislaby/linux-stable.git,
>>>
>>> branch stable-3.12-queue. Is that still correct ?
>>
>> Oops, I forgot to push the qeueu, sorry. Now fixed.
>>
> 
> Now the build reference is v3.12.56-62-gceed939, but everything still
> builds fine,
> so we should be ok.

Nice, thanks!


-- 
js
suse labs