stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
To: "Michał Winiarski" <michal.winiarski@intel.com>,
	intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org, Chris Wilson <chris@chris-wilson.co.uk>,
	Mika Kuoppala <mika.kuoppala@intel.com>
Subject: Re: [PATCH v4] drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno write
Date: Wed, 13 Apr 2016 15:09:21 +0300	[thread overview]
Message-ID: <570E36F1.8020309@linux.intel.com> (raw)
In-Reply-To: <1460469115-26002-1-git-send-email-michal.winiarski@intel.com>



On 04/12/2016 04:51 PM, Michał Winiarski wrote:
> We started to use PIPE_CONTROL to write render ring seqno in order to
> combat seqno write vs interrupt generation problems. This was introduced
> by commit 7c17d377374d ("drm/i915: Use ordered seqno write interrupt
> generation on gen8+ execlists").
> 
> On gen8+ size of PIPE_CONTROL with Post Sync Operation should be
> 6 dwords. When we're using older 5-dword variant it's possible to
> observe inconsistent values written by PIPE_CONTROL with Post
> Sync Operation from user batches, resulting in rendering corruptions.
> 
> v2: Fix BAT failures
> v3: Comments on alignment and thrashing high dword of seqno (Chris)
> v4: Updated commit msg (Mika)
> 
> Testcase: igt/gem_pipe_control_store_loop/*-qword-write
> Issue: VIZ-7393
> Cc: stable@vger.kernel.org
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>

Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>


> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_lrc.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index 0d6dc5e..30abe53 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -1945,15 +1945,18 @@ static int gen8_emit_request_render(struct drm_i915_gem_request *request)
>  	struct intel_ringbuffer *ringbuf = request->ringbuf;
>  	int ret;
>  
> -	ret = intel_logical_ring_begin(request, 6 + WA_TAIL_DWORDS);
> +	ret = intel_logical_ring_begin(request, 8 + WA_TAIL_DWORDS);
>  	if (ret)
>  		return ret;
>  
> +	/* We're using qword write, seqno should be aligned to 8 bytes. */
> +	BUILD_BUG_ON(I915_GEM_HWS_INDEX & 1);
> +
>  	/* w/a for post sync ops following a GPGPU operation we
>  	 * need a prior CS_STALL, which is emitted by the flush
>  	 * following the batch.
>  	 */
> -	intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(5));
> +	intel_logical_ring_emit(ringbuf, GFX_OP_PIPE_CONTROL(6));
>  	intel_logical_ring_emit(ringbuf,
>  				(PIPE_CONTROL_GLOBAL_GTT_IVB |
>  				 PIPE_CONTROL_CS_STALL |
> @@ -1961,7 +1964,10 @@ static int gen8_emit_request_render(struct drm_i915_gem_request *request)
>  	intel_logical_ring_emit(ringbuf, hws_seqno_address(request->engine));
>  	intel_logical_ring_emit(ringbuf, 0);
>  	intel_logical_ring_emit(ringbuf, i915_gem_request_get_seqno(request));
> +	/* We're thrashing one dword of HWS. */
> +	intel_logical_ring_emit(ringbuf, 0);
>  	intel_logical_ring_emit(ringbuf, MI_USER_INTERRUPT);
> +	intel_logical_ring_emit(ringbuf, MI_NOOP);
>  	return intel_logical_ring_advance_and_submit(request);
>  }
>  
> 

  parent reply	other threads:[~2016-04-13 12:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-12 13:51 [PATCH v4] drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno write Michał Winiarski
2016-04-12 13:58 ` [Intel-gfx] " Mika Kuoppala
2016-04-12 15:16   ` Chris Wilson
2016-04-13 12:09 ` Abdiel Janulgue [this message]
2016-04-13 12:48   ` Mika Kuoppala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=570E36F1.8020309@linux.intel.com \
    --to=abdiel.janulgue@linux.intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=michal.winiarski@intel.com \
    --cc=mika.kuoppala@intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).