* [PATCH 1/1] usb: xhci: fix possible wild pointer
@ 2016-12-02 2:29 Lu Baolu
2016-12-02 4:18 ` Baolin Wang
2016-12-02 13:39 ` Mathias Nyman
0 siblings, 2 replies; 6+ messages in thread
From: Lu Baolu @ 2016-12-02 2:29 UTC (permalink / raw)
To: Mathias Nyman; +Cc: linux-usb, linux-kernel, Lu Baolu, stable
handle_cmd_completion() frees a command structure which might
be still referenced by xhci->current_cmd. This might cause
problem when xhci->current_cmd is accessed after that.
A real-life case could be like this. The host takes a very long
time to respond to a command, and the command timer is fired at
the same time when the command completion event arrives. The
command completion handler frees xhci->current_cmd before the
timer function can grab xhci->lock. Afterward, timer function
grabs the lock and go ahead with checking and setting members
of xhci->current_cmd.
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bdf6b13..13e05f6 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1267,14 +1267,16 @@ void xhci_handle_command_timeout(unsigned long data)
bool second_timeout = false;
xhci = (struct xhci_hcd *) data;
- /* mark this command to be cancelled */
spin_lock_irqsave(&xhci->lock, flags);
- if (xhci->current_cmd) {
- if (xhci->current_cmd->status == COMP_CMD_ABORT)
- second_timeout = true;
- xhci->current_cmd->status = COMP_CMD_ABORT;
+ if (!xhci->current_cmd) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
}
+ if (xhci->current_cmd->status == COMP_CMD_ABORT)
+ second_timeout = true;
+ xhci->current_cmd->status = COMP_CMD_ABORT;
+
/* Make sure command ring is running before aborting it */
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
@@ -1422,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
xhci->current_cmd = list_entry(cmd->cmd_list.next,
struct xhci_command, cmd_list);
mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ } else if (xhci->current_cmd == cmd) {
+ xhci->current_cmd = NULL;
+ } else {
+ xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
}
event_handled:
--
2.1.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: xhci: fix possible wild pointer
2016-12-02 2:29 [PATCH 1/1] usb: xhci: fix possible wild pointer Lu Baolu
@ 2016-12-02 4:18 ` Baolin Wang
2016-12-02 4:40 ` Lu Baolu
2016-12-02 13:39 ` Mathias Nyman
1 sibling, 1 reply; 6+ messages in thread
From: Baolin Wang @ 2016-12-02 4:18 UTC (permalink / raw)
To: Lu Baolu; +Cc: Mathias Nyman, USB, LKML, stable
On 2 December 2016 at 10:29, Lu Baolu <baolu.lu@linux.intel.com> wrote:
> handle_cmd_completion() frees a command structure which might
> be still referenced by xhci->current_cmd. This might cause
> problem when xhci->current_cmd is accessed after that.
>
> A real-life case could be like this. The host takes a very long
> time to respond to a command, and the command timer is fired at
> the same time when the command completion event arrives. The
> command completion handler frees xhci->current_cmd before the
> timer function can grab xhci->lock. Afterward, timer function
> grabs the lock and go ahead with checking and setting members
> of xhci->current_cmd.
>
> Cc: <stable@vger.kernel.org> # v3.16+
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Nice catch. I was also curious where set xhci->current_cmd to be NULL
when current command is freed.
Tested-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index bdf6b13..13e05f6 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -1267,14 +1267,16 @@ void xhci_handle_command_timeout(unsigned long data)
> bool second_timeout = false;
> xhci = (struct xhci_hcd *) data;
>
> - /* mark this command to be cancelled */
> spin_lock_irqsave(&xhci->lock, flags);
> - if (xhci->current_cmd) {
> - if (xhci->current_cmd->status == COMP_CMD_ABORT)
> - second_timeout = true;
> - xhci->current_cmd->status = COMP_CMD_ABORT;
> + if (!xhci->current_cmd) {
> + spin_unlock_irqrestore(&xhci->lock, flags);
> + return;
> }
>
> + if (xhci->current_cmd->status == COMP_CMD_ABORT)
> + second_timeout = true;
> + xhci->current_cmd->status = COMP_CMD_ABORT;
> +
> /* Make sure command ring is running before aborting it */
> hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
> if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
> @@ -1422,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
> xhci->current_cmd = list_entry(cmd->cmd_list.next,
> struct xhci_command, cmd_list);
> mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
> + } else if (xhci->current_cmd == cmd) {
> + xhci->current_cmd = NULL;
> + } else {
> + xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
> }
>
> event_handled:
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Baolin.wang
Best Regards
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: xhci: fix possible wild pointer
2016-12-02 4:18 ` Baolin Wang
@ 2016-12-02 4:40 ` Lu Baolu
2016-12-02 4:48 ` Baolin Wang
0 siblings, 1 reply; 6+ messages in thread
From: Lu Baolu @ 2016-12-02 4:40 UTC (permalink / raw)
To: Baolin Wang; +Cc: Mathias Nyman, USB, LKML, stable
Hi,
On 12/02/2016 12:18 PM, Baolin Wang wrote:
> On 2 December 2016 at 10:29, Lu Baolu <baolu.lu@linux.intel.com> wrote:
>> handle_cmd_completion() frees a command structure which might
>> be still referenced by xhci->current_cmd. This might cause
>> problem when xhci->current_cmd is accessed after that.
>>
>> A real-life case could be like this. The host takes a very long
>> time to respond to a command, and the command timer is fired at
>> the same time when the command completion event arrives. The
>> command completion handler frees xhci->current_cmd before the
>> timer function can grab xhci->lock. Afterward, timer function
>> grabs the lock and go ahead with checking and setting members
>> of xhci->current_cmd.
>>
>> Cc: <stable@vger.kernel.org> # v3.16+
>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> Nice catch. I was also curious where set xhci->current_cmd to be NULL
> when current command is freed.
Below code does:
xhci->current_cmd = list_entry(cmd->cmd_list.next,
struct xhci_command, cmd_list);
mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
+ } else if (xhci->current_cmd == cmd) {
+ xhci->current_cmd = NULL;
+ } else {
+ xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
}
Best regards,
Lu Baolu
> Tested-by: Baolin Wang <baolin.wang@linaro.org>
>
>> ---
>> drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
>> 1 file changed, 11 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>> index bdf6b13..13e05f6 100644
>> --- a/drivers/usb/host/xhci-ring.c
>> +++ b/drivers/usb/host/xhci-ring.c
>> @@ -1267,14 +1267,16 @@ void xhci_handle_command_timeout(unsigned long data)
>> bool second_timeout = false;
>> xhci = (struct xhci_hcd *) data;
>>
>> - /* mark this command to be cancelled */
>> spin_lock_irqsave(&xhci->lock, flags);
>> - if (xhci->current_cmd) {
>> - if (xhci->current_cmd->status == COMP_CMD_ABORT)
>> - second_timeout = true;
>> - xhci->current_cmd->status = COMP_CMD_ABORT;
>> + if (!xhci->current_cmd) {
>> + spin_unlock_irqrestore(&xhci->lock, flags);
>> + return;
>> }
>>
>> + if (xhci->current_cmd->status == COMP_CMD_ABORT)
>> + second_timeout = true;
>> + xhci->current_cmd->status = COMP_CMD_ABORT;
>> +
>> /* Make sure command ring is running before aborting it */
>> hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
>> if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
>> @@ -1422,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
>> xhci->current_cmd = list_entry(cmd->cmd_list.next,
>> struct xhci_command, cmd_list);
>> mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
>> + } else if (xhci->current_cmd == cmd) {
>> + xhci->current_cmd = NULL;
>> + } else {
>> + xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
>> }
>>
>> event_handled:
>> --
>> 2.1.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: xhci: fix possible wild pointer
2016-12-02 4:40 ` Lu Baolu
@ 2016-12-02 4:48 ` Baolin Wang
0 siblings, 0 replies; 6+ messages in thread
From: Baolin Wang @ 2016-12-02 4:48 UTC (permalink / raw)
To: Lu Baolu; +Cc: Mathias Nyman, USB, LKML, stable
On 2 December 2016 at 12:40, Lu Baolu <baolu.lu@linux.intel.com> wrote:
> Hi,
>
> On 12/02/2016 12:18 PM, Baolin Wang wrote:
>> On 2 December 2016 at 10:29, Lu Baolu <baolu.lu@linux.intel.com> wrote:
>>> handle_cmd_completion() frees a command structure which might
>>> be still referenced by xhci->current_cmd. This might cause
>>> problem when xhci->current_cmd is accessed after that.
>>>
>>> A real-life case could be like this. The host takes a very long
>>> time to respond to a command, and the command timer is fired at
>>> the same time when the command completion event arrives. The
>>> command completion handler frees xhci->current_cmd before the
>>> timer function can grab xhci->lock. Afterward, timer function
>>> grabs the lock and go ahead with checking and setting members
>>> of xhci->current_cmd.
>>>
>>> Cc: <stable@vger.kernel.org> # v3.16+
>>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>> Nice catch. I was also curious where set xhci->current_cmd to be NULL
>> when current command is freed.
>
> Below code does:
Yes, I just means you did that, but the original code did not. Sorry
for confusing.
>
> xhci->current_cmd = list_entry(cmd->cmd_list.next,
> struct xhci_command, cmd_list);
> mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
> + } else if (xhci->current_cmd == cmd) {
> + xhci->current_cmd = NULL;
> + } else {
> + xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
> }
>
>
> Best regards,
> Lu Baolu
>
>> Tested-by: Baolin Wang <baolin.wang@linaro.org>
>>
>>> ---
>>> drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
>>> 1 file changed, 11 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>>> index bdf6b13..13e05f6 100644
>>> --- a/drivers/usb/host/xhci-ring.c
>>> +++ b/drivers/usb/host/xhci-ring.c
>>> @@ -1267,14 +1267,16 @@ void xhci_handle_command_timeout(unsigned long data)
>>> bool second_timeout = false;
>>> xhci = (struct xhci_hcd *) data;
>>>
>>> - /* mark this command to be cancelled */
>>> spin_lock_irqsave(&xhci->lock, flags);
>>> - if (xhci->current_cmd) {
>>> - if (xhci->current_cmd->status == COMP_CMD_ABORT)
>>> - second_timeout = true;
>>> - xhci->current_cmd->status = COMP_CMD_ABORT;
>>> + if (!xhci->current_cmd) {
>>> + spin_unlock_irqrestore(&xhci->lock, flags);
>>> + return;
>>> }
>>>
>>> + if (xhci->current_cmd->status == COMP_CMD_ABORT)
>>> + second_timeout = true;
>>> + xhci->current_cmd->status = COMP_CMD_ABORT;
>>> +
>>> /* Make sure command ring is running before aborting it */
>>> hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
>>> if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
>>> @@ -1422,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
>>> xhci->current_cmd = list_entry(cmd->cmd_list.next,
>>> struct xhci_command, cmd_list);
>>> mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
>>> + } else if (xhci->current_cmd == cmd) {
>>> + xhci->current_cmd = NULL;
>>> + } else {
>>> + xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
>>> }
>>>
>>> event_handled:
>>> --
>>> 2.1.4
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>
--
Baolin.wang
Best Regards
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: xhci: fix possible wild pointer
2016-12-02 2:29 [PATCH 1/1] usb: xhci: fix possible wild pointer Lu Baolu
2016-12-02 4:18 ` Baolin Wang
@ 2016-12-02 13:39 ` Mathias Nyman
2016-12-05 9:07 ` Lu Baolu
1 sibling, 1 reply; 6+ messages in thread
From: Mathias Nyman @ 2016-12-02 13:39 UTC (permalink / raw)
To: Lu Baolu; +Cc: linux-usb, linux-kernel, stable
On 02.12.2016 04:29, Lu Baolu wrote:
> handle_cmd_completion() frees a command structure which might
> be still referenced by xhci->current_cmd. This might cause
> problem when xhci->current_cmd is accessed after that.
>
> A real-life case could be like this. The host takes a very long
> time to respond to a command, and the command timer is fired at
> the same time when the command completion event arrives. The
> command completion handler frees xhci->current_cmd before the
> timer function can grab xhci->lock. Afterward, timer function
> grabs the lock and go ahead with checking and setting members
> of xhci->current_cmd.
>
> Cc: <stable@vger.kernel.org> # v3.16+
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> ---
> drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index bdf6b13..13e05f6 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -1267,14 +1267,16 @@ void xhci_handle_command_timeout(unsigned long data)
> bool second_timeout = false;
> xhci = (struct xhci_hcd *) data;
>
> - /* mark this command to be cancelled */
> spin_lock_irqsave(&xhci->lock, flags);
> - if (xhci->current_cmd) {
> - if (xhci->current_cmd->status == COMP_CMD_ABORT)
> - second_timeout = true;
> - xhci->current_cmd->status = COMP_CMD_ABORT;
> + if (!xhci->current_cmd) {
> + spin_unlock_irqrestore(&xhci->lock, flags);
> + return;
> }
>
> + if (xhci->current_cmd->status == COMP_CMD_ABORT)
> + second_timeout = true;
> + xhci->current_cmd->status = COMP_CMD_ABORT;
> +
> /* Make sure command ring is running before aborting it */
> hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
> if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
> @@ -1422,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
> xhci->current_cmd = list_entry(cmd->cmd_list.next,
> struct xhci_command, cmd_list);
> mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
> + } else if (xhci->current_cmd == cmd) {
> + xhci->current_cmd = NULL;
> + } else {
> + xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
> }
>
> event_handled:
>
Thanks,
I might do some tweaking to (or remove) the warn message when applying if
that is ok
-Mathias
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: xhci: fix possible wild pointer
2016-12-02 13:39 ` Mathias Nyman
@ 2016-12-05 9:07 ` Lu Baolu
0 siblings, 0 replies; 6+ messages in thread
From: Lu Baolu @ 2016-12-05 9:07 UTC (permalink / raw)
To: Mathias Nyman; +Cc: linux-usb, linux-kernel, stable
Hi,
On 12/02/2016 09:39 PM, Mathias Nyman wrote:
> On 02.12.2016 04:29, Lu Baolu wrote:
>> handle_cmd_completion() frees a command structure which might
>> be still referenced by xhci->current_cmd. This might cause
>> problem when xhci->current_cmd is accessed after that.
>>
>> A real-life case could be like this. The host takes a very long
>> time to respond to a command, and the command timer is fired at
>> the same time when the command completion event arrives. The
>> command completion handler frees xhci->current_cmd before the
>> timer function can grab xhci->lock. Afterward, timer function
>> grabs the lock and go ahead with checking and setting members
>> of xhci->current_cmd.
>>
>> Cc: <stable@vger.kernel.org> # v3.16+
>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>> ---
>> drivers/usb/host/xhci-ring.c | 16 +++++++++++-----
>> 1 file changed, 11 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>> index bdf6b13..13e05f6 100644
>> --- a/drivers/usb/host/xhci-ring.c
>> +++ b/drivers/usb/host/xhci-ring.c
>> @@ -1267,14 +1267,16 @@ void xhci_handle_command_timeout(unsigned long data)
>> bool second_timeout = false;
>> xhci = (struct xhci_hcd *) data;
>>
>> - /* mark this command to be cancelled */
>> spin_lock_irqsave(&xhci->lock, flags);
>> - if (xhci->current_cmd) {
>> - if (xhci->current_cmd->status == COMP_CMD_ABORT)
>> - second_timeout = true;
>> - xhci->current_cmd->status = COMP_CMD_ABORT;
>> + if (!xhci->current_cmd) {
>> + spin_unlock_irqrestore(&xhci->lock, flags);
>> + return;
>> }
>>
>> + if (xhci->current_cmd->status == COMP_CMD_ABORT)
>> + second_timeout = true;
>> + xhci->current_cmd->status = COMP_CMD_ABORT;
>> +
>> /* Make sure command ring is running before aborting it */
>> hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
>> if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
>> @@ -1422,6 +1424,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
>> xhci->current_cmd = list_entry(cmd->cmd_list.next,
>> struct xhci_command, cmd_list);
>> mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT);
>> + } else if (xhci->current_cmd == cmd) {
>> + xhci->current_cmd = NULL;
>> + } else {
>> + xhci_warn(xhci, "WARN current_cmd doesn't match command\n");
>> }
>>
>> event_handled:
>>
>
> Thanks,
>
> I might do some tweaking to (or remove) the warn message when applying if
> that is ok
Sure.
>
> -Mathias
>
Best regards,
Lu Baolu
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-12-05 9:37 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-02 2:29 [PATCH 1/1] usb: xhci: fix possible wild pointer Lu Baolu
2016-12-02 4:18 ` Baolin Wang
2016-12-02 4:40 ` Lu Baolu
2016-12-02 4:48 ` Baolin Wang
2016-12-02 13:39 ` Mathias Nyman
2016-12-05 9:07 ` Lu Baolu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).