From: Felipe Balbi <felipe.balbi@linux.intel.com>
To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
mathias.nyman@intel.com, gregkh@linuxfoundation.org
Cc: linux-usb@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
stable@vger.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: Re: [PATCH v3] usb: host: xhci-rcar: Avoid long wait in xhci_reset()
Date: Fri, 06 May 2016 10:54:27 +0300 [thread overview]
Message-ID: <8737pvipu4.fsf@intel.com> (raw)
In-Reply-To: <1462515611-6972-1-git-send-email-yoshihiro.shimoda.uh@renesas.com>
[-- Attachment #1: Type: text/plain, Size: 2365 bytes --]
Hi,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> writes:
> The firmware of R-Car USB 3.0 host controller will control the reset.
> So, if the xhci driver doesn't do firmware downloading (e.g. kernel
> configuration is CONFIG_USB_XHCI_PLATFORM=y and CONFIG_USB_XHCI_RCAR
> is not set), the reset of USB 3.0 host controller doesn't work
> correctly. Then, the host controller will cause long wait in
> xhci_reset() because the CMD_RESET bit of op_regs->command is not
> cleared for 10 seconds.
>
> So, this patch modifies the Kconfig to enable both CONFIG_USB_XHCI_PLATFORM
> and CONFIG_USB_XHCI_RCAR.
>
> Fixes: 4ac8918f3a7 (usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers)
> Cc: <stable@vger.kernel.org> # v3.17+
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
looks good to me, thanks :)
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
> ---
> Changes from v2:
> - Modify the Kconfig instead of xhci-rcar.h
> http://www.spinics.net/lists/linux-usb/msg139681.html
> http://www.spinics.net/lists/linux-usb/msg139722.html
>
> Changes from v1:
> - Revise the commit log.
> http://www.spinics.net/lists/stable/msg130007.html
>
> drivers/usb/host/Kconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 3050b18..e9d4dde 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -35,6 +35,7 @@ config USB_XHCI_PCI
>
> config USB_XHCI_PLATFORM
> tristate "Generic xHCI driver for a platform device"
> + select USB_XHCI_RCAR if ARCH_RENESAS
> ---help---
> Adds an xHCI host driver for a generic platform device, which
> provides a memory space and an irq.
> @@ -63,7 +64,7 @@ config USB_XHCI_MVEBU
>
> config USB_XHCI_RCAR
> tristate "xHCI support for Renesas R-Car SoCs"
> - select USB_XHCI_PLATFORM
> + depends on USB_XHCI_PLATFORM
> depends on ARCH_RENESAS || COMPILE_TEST
> ---help---
> Say 'Y' to enable the support for the xHCI host controller
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]
prev parent reply other threads:[~2016-05-06 7:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 6:20 [PATCH v3] usb: host: xhci-rcar: Avoid long wait in xhci_reset() Yoshihiro Shimoda
2016-05-06 7:54 ` Felipe Balbi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8737pvipu4.fsf@intel.com \
--to=felipe.balbi@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=stable@vger.kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox