From: Takashi Iwai <tiwai@suse.de>
To: David Rhodes <david.rhodes@cirrus.com>,
Richard Fitzgerald <rf@opensource.cirrus.com>,
Stefan Binding <sbinding@opensource.cirrus.com>,
Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: "Cássio Gabriel" <cassiogabrielcontato@gmail.com>,
"Takashi Iwai" <tiwai@suse.com>,
"Jaroslav Kysela" <perex@perex.cz>,
linux-sound@vger.kernel.org, patches@opensource.cirrus.com,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH RESEND] ALSA: hda/cs35l41: Fix firmware load work teardown
Date: Fri, 15 May 2026 11:07:14 +0200 [thread overview]
Message-ID: <87mry1t519.wl-tiwai@suse.de> (raw)
In-Reply-To: <20260511-alsa-hda-cs35l41-fw-work-teardown-v1-1-1184e9bc4f25@gmail.com>
On Mon, 11 May 2026 06:29:34 +0200,
Cássio Gabriel wrote:
>
> cs35l41_hda creates ALSA controls whose private data points at the
> cs35l41_hda object. The firmware load control can also queue
> fw_load_work.
>
> Those controls are not removed on component unbind, and device remove
> only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
> skipped when halo_initialized is false. With firmware_autostart
> disabled, a firmware load can be requested before the DSP has been
> initialized. If the component or device is removed before the queued
> work runs, the worker can run after teardown and dereference driver
> state that is no longer valid.
>
> Track the created controls and remove them on unbind so no new control
> callback can reach the driver data or queue more work. Then cancel
> fw_load_work to drain any request that was already queued. Also cancel
> the work unconditionally during device remove before runtime PM teardown.
>
> Fixes: 47ceabd99a28 ("ALSA: hda: cs35l41: Support Firmware switching and reloading")
> Fixes: 4c870513fbb0 ("ALSA: hda: cs35l41: Add read-only ALSA control for forced mute")
> Cc: stable@vger.kernel.org
> Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Cirrus people, could you take a look? I'd like to let this better
reviewed since it's non-trivial changes.
thanks,
Takashi
> ---
> sound/hda/codecs/side-codecs/cs35l41_hda.c | 77 +++++++++++++++++++++---------
> sound/hda/codecs/side-codecs/cs35l41_hda.h | 5 ++
> 2 files changed, 60 insertions(+), 22 deletions(-)
>
> diff --git a/sound/hda/codecs/side-codecs/cs35l41_hda.c b/sound/hda/codecs/side-codecs/cs35l41_hda.c
> index b64890006bb7..7f18be0ccf5a 100644
> --- a/sound/hda/codecs/side-codecs/cs35l41_hda.c
> +++ b/sound/hda/codecs/side-codecs/cs35l41_hda.c
> @@ -1325,6 +1325,43 @@ static int cs35l41_fw_type_ctl_info(struct snd_kcontrol *kcontrol, struct snd_ct
> return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(cs35l41_hda_fw_ids), cs35l41_hda_fw_ids);
> }
>
> +static void cs35l41_remove_controls(struct cs35l41_hda *cs35l41)
> +{
> + if (!cs35l41->codec)
> + return;
> +
> + snd_ctl_remove(cs35l41->codec->card, cs35l41->mute_override_ctl);
> + cs35l41->mute_override_ctl = NULL;
> +
> + snd_ctl_remove(cs35l41->codec->card, cs35l41->fw_load_ctl);
> + cs35l41->fw_load_ctl = NULL;
> +
> + snd_ctl_remove(cs35l41->codec->card, cs35l41->fw_type_ctl);
> + cs35l41->fw_type_ctl = NULL;
> +}
> +
> +static int cs35l41_add_control(struct cs35l41_hda *cs35l41,
> + struct snd_kcontrol_new *ctl,
> + struct snd_kcontrol **kctl)
> +{
> + int ret;
> +
> + *kctl = snd_ctl_new1(ctl, cs35l41);
> + if (!*kctl)
> + return -ENOMEM;
> +
> + ret = snd_ctl_add(cs35l41->codec->card, *kctl);
> + if (ret) {
> + dev_err(cs35l41->dev, "Failed to add KControl %s = %d\n", ctl->name, ret);
> + *kctl = NULL;
> + return ret;
> + }
> +
> + dev_dbg(cs35l41->dev, "Added Control %s\n", ctl->name);
> +
> + return 0;
> +}
> +
> static int cs35l41_create_controls(struct cs35l41_hda *cs35l41)
> {
> char fw_type_ctl_name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
> @@ -1360,32 +1397,23 @@ static int cs35l41_create_controls(struct cs35l41_hda *cs35l41)
> scnprintf(mute_override_ctl_name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s Forced Mute Status",
> cs35l41->amp_name);
>
> - ret = snd_ctl_add(cs35l41->codec->card, snd_ctl_new1(&fw_type_ctl, cs35l41));
> - if (ret) {
> - dev_err(cs35l41->dev, "Failed to add KControl %s = %d\n", fw_type_ctl.name, ret);
> - return ret;
> - }
> -
> - dev_dbg(cs35l41->dev, "Added Control %s\n", fw_type_ctl.name);
> -
> - ret = snd_ctl_add(cs35l41->codec->card, snd_ctl_new1(&fw_load_ctl, cs35l41));
> - if (ret) {
> - dev_err(cs35l41->dev, "Failed to add KControl %s = %d\n", fw_load_ctl.name, ret);
> - return ret;
> - }
> -
> - dev_dbg(cs35l41->dev, "Added Control %s\n", fw_load_ctl.name);
> + ret = cs35l41_add_control(cs35l41, &fw_type_ctl, &cs35l41->fw_type_ctl);
> + if (ret)
> + goto err;
>
> - ret = snd_ctl_add(cs35l41->codec->card, snd_ctl_new1(&mute_override_ctl, cs35l41));
> - if (ret) {
> - dev_err(cs35l41->dev, "Failed to add KControl %s = %d\n", mute_override_ctl.name,
> - ret);
> - return ret;
> - }
> + ret = cs35l41_add_control(cs35l41, &fw_load_ctl, &cs35l41->fw_load_ctl);
> + if (ret)
> + goto err;
>
> - dev_dbg(cs35l41->dev, "Added Control %s\n", mute_override_ctl.name);
> + ret = cs35l41_add_control(cs35l41, &mute_override_ctl, &cs35l41->mute_override_ctl);
> + if (ret)
> + goto err;
>
> return 0;
> +
> +err:
> + cs35l41_remove_controls(cs35l41);
> + return ret;
> }
>
> static bool cs35l41_dsm_supported(acpi_handle handle, unsigned int commands)
> @@ -1522,6 +1550,10 @@ static void cs35l41_hda_unbind(struct device *dev, struct device *master, void *
> device_link_remove(&cs35l41->codec->core.dev, cs35l41->dev);
> unlock_system_sleep(sleep_flags);
> memset(comp, 0, sizeof(*comp));
> +
> + cs35l41_remove_controls(cs35l41);
> + cancel_work_sync(&cs35l41->fw_load_work);
> + cs35l41->codec = NULL;
> }
> }
>
> @@ -2058,6 +2090,7 @@ void cs35l41_hda_remove(struct device *dev)
> struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
>
> component_del(cs35l41->dev, &cs35l41_hda_comp_ops);
> + cancel_work_sync(&cs35l41->fw_load_work);
>
> pm_runtime_get_sync(cs35l41->dev);
> pm_runtime_dont_use_autosuspend(cs35l41->dev);
> diff --git a/sound/hda/codecs/side-codecs/cs35l41_hda.h b/sound/hda/codecs/side-codecs/cs35l41_hda.h
> index 7d003c598e93..56ec07c0bb74 100644
> --- a/sound/hda/codecs/side-codecs/cs35l41_hda.h
> +++ b/sound/hda/codecs/side-codecs/cs35l41_hda.h
> @@ -57,6 +57,8 @@ enum control_bus {
> SPI
> };
>
> +struct snd_kcontrol;
> +
> struct cs35l41_hda {
> struct device *dev;
> struct regmap *regmap;
> @@ -75,6 +77,9 @@ struct cs35l41_hda {
> int speaker_id;
> struct mutex fw_mutex;
> struct work_struct fw_load_work;
> + struct snd_kcontrol *fw_type_ctl;
> + struct snd_kcontrol *fw_load_ctl;
> + struct snd_kcontrol *mute_override_ctl;
>
> struct regmap_irq_chip_data *irq_data;
> bool firmware_running;
>
> ---
> base-commit: 1bc46462f4c09f8d429ae8ec17f92886d604659f
> change-id: 20260421-alsa-hda-cs35l41-fw-work-teardown-48cdba14a9cd
>
> Best regards,
> --
> Cássio Gabriel <cassiogabrielcontato@gmail.com>
> --
> Cássio Gabriel <cassiogabrielcontato@gmail.com>
>
next prev parent reply other threads:[~2026-05-15 9:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 4:29 [PATCH RESEND] ALSA: hda/cs35l41: Fix firmware load work teardown Cássio Gabriel
2026-05-15 9:07 ` Takashi Iwai [this message]
2026-05-15 10:12 ` Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mry1t519.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=cassiogabrielcontato@gmail.com \
--cc=david.rhodes@cirrus.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=rf@opensource.cirrus.com \
--cc=sbinding@opensource.cirrus.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=vitalyr@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox