* [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible [not found] <20230819004356.1454718-1-Liam.Howlett@oracle.com> @ 2023-08-19 0:43 ` Liam R. Howlett 2023-08-29 16:42 ` Geert Uytterhoeven 2023-08-30 19:49 ` Andreas Schwab 0 siblings, 2 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-08-19 0:43 UTC (permalink / raw) To: Andrew Morton; +Cc: maple-tree, linux-mm, linux-kernel, Liam R. Howlett, stable The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution. During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code: Writer: reader: mas_wr_append set end pivot updates end metata Detects write to last slot last slot write is to start of slot store current contents in slot overwrite old end pivot mas_next_slot(): read end metadata read old end pivot return with incorrect range store new value Alternatively: Writer: reader: mas_wr_append set end pivot updates end metata Detects write to last slot last lost write to end of slot store value mas_next_slot(): read end metadata read old end pivot read new end pivot return with incorrect range set old end pivot There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action. Fixes: 54a611b60590 ("Maple Tree: add new data structure") Cc: stable@vger.kernel.org Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> --- lib/maple_tree.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/lib/maple_tree.c b/lib/maple_tree.c index ffb9d15bd815..05d5db255c39 100644 --- a/lib/maple_tree.c +++ b/lib/maple_tree.c @@ -4107,6 +4107,10 @@ static inline unsigned char mas_wr_new_end(struct ma_wr_state *wr_mas) * mas_wr_append: Attempt to append * @wr_mas: the maple write state * + * This is currently unsafe in rcu mode since the end of the node may be cached + * by readers while the node contents may be updated which could result in + * inaccurate information. + * * Return: True if appended, false otherwise */ static inline bool mas_wr_append(struct ma_wr_state *wr_mas, @@ -4116,6 +4120,9 @@ static inline bool mas_wr_append(struct ma_wr_state *wr_mas, struct ma_state *mas = wr_mas->mas; unsigned char node_pivots = mt_pivots[wr_mas->type]; + if (mt_in_rcu(mas->tree)) + return false; + if (mas->offset != wr_mas->node_end) return false; -- 2.39.2 ^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-19 0:43 ` [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible Liam R. Howlett @ 2023-08-29 16:42 ` Geert Uytterhoeven 2023-08-31 5:39 ` Michael Ellerman ` (2 more replies) 2023-08-30 19:49 ` Andreas Schwab 1 sibling, 3 replies; 43+ messages in thread From: Geert Uytterhoeven @ 2023-08-29 16:42 UTC (permalink / raw) To: Liam R. Howlett Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc Hi Liam, On Fri, 18 Aug 2023, Liam R. Howlett wrote: > The current implementation of append may cause duplicate data and/or > incorrect ranges to be returned to a reader during an update. Although > this has not been reported or seen, disable the append write operation > while the tree is in rcu mode out of an abundance of caution. > > During the analysis of the mas_next_slot() the following was > artificially created by separating the writer and reader code: > > Writer: reader: > mas_wr_append > set end pivot > updates end metata > Detects write to last slot > last slot write is to start of slot > store current contents in slot > overwrite old end pivot > mas_next_slot(): > read end metadata > read old end pivot > return with incorrect range > store new value > > Alternatively: > > Writer: reader: > mas_wr_append > set end pivot > updates end metata > Detects write to last slot > last lost write to end of slot > store value > mas_next_slot(): > read end metadata > read old end pivot > read new end pivot > return with incorrect range > set old end pivot > > There may be other accesses that are not safe since we are now updating > both metadata and pointers, so disabling append if there could be rcu > readers is the safest action. > > Fixes: 54a611b60590 ("Maple Tree: add new data structure") > Cc: stable@vger.kernel.org > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable. On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning: clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns /soc/timer@e803b000: used for clocksource /soc/timer@e803c000: used for clock events +------------[ cut here ]------------ +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 +Interrupts were enabled early +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 +Hardware name: Generic R7S9210 (Flattened Device Tree) + unwind_backtrace from show_stack+0x10/0x14 + show_stack from dump_stack_lvl+0x24/0x3c + dump_stack_lvl from __warn+0x74/0xb8 + __warn from warn_slowpath_fmt+0x78/0xb0 + warn_slowpath_fmt from start_kernel+0x2f0/0x480 + start_kernel from 0x0 +---[ end trace 0000000000000000 ]--- Console: colour dummy device 80x30 printk: console [tty0] enabled Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000) Reverting this commit fixes the issue. RCU-related configs: $ grep RCU .config # RCU Subsystem CONFIG_TINY_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_TINY_SRCU=y # end of RCU Subsystem # RCU Debugging # CONFIG_RCU_SCALE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_REF_SCALE_TEST is not set # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # end of RCU Debugging CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, as CONFIG_* is reserved for kernel configuration options). I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration. Do you have a clue? Thanks! > --- a/lib/maple_tree.c > +++ b/lib/maple_tree.c > @@ -4107,6 +4107,10 @@ static inline unsigned char mas_wr_new_end(struct ma_wr_state *wr_mas) > * mas_wr_append: Attempt to append > * @wr_mas: the maple write state > * > + * This is currently unsafe in rcu mode since the end of the node may be cached > + * by readers while the node contents may be updated which could result in > + * inaccurate information. > + * > * Return: True if appended, false otherwise > */ > static inline bool mas_wr_append(struct ma_wr_state *wr_mas, > @@ -4116,6 +4120,9 @@ static inline bool mas_wr_append(struct ma_wr_state *wr_mas, > struct ma_state *mas = wr_mas->mas; > unsigned char node_pivots = mt_pivots[wr_mas->type]; > > + if (mt_in_rcu(mas->tree)) > + return false; > + > if (mas->offset != wr_mas->node_end) > return false; > > -- > 2.39.2 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-29 16:42 ` Geert Uytterhoeven @ 2023-08-31 5:39 ` Michael Ellerman 2023-08-31 8:25 ` Geert Uytterhoeven 2023-09-06 15:23 ` Liam R. Howlett 2023-09-11 12:27 ` Linux regression tracking #adding (Thorsten Leemhuis) 2 siblings, 1 reply; 43+ messages in thread From: Michael Ellerman @ 2023-08-31 5:39 UTC (permalink / raw) To: Geert Uytterhoeven, Liam R. Howlett Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc Geert Uytterhoeven <geert@linux-m68k.org> writes: > Hi Liam, > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: >> The current implementation of append may cause duplicate data and/or >> incorrect ranges to be returned to a reader during an update. Although >> this has not been reported or seen, disable the append write operation >> while the tree is in rcu mode out of an abundance of caution. >> >> During the analysis of the mas_next_slot() the following was >> artificially created by separating the writer and reader code: >> >> Writer: reader: >> mas_wr_append >> set end pivot >> updates end metata >> Detects write to last slot >> last slot write is to start of slot >> store current contents in slot >> overwrite old end pivot >> mas_next_slot(): >> read end metadata >> read old end pivot >> return with incorrect range >> store new value >> >> Alternatively: >> >> Writer: reader: >> mas_wr_append >> set end pivot >> updates end metata >> Detects write to last slot >> last lost write to end of slot >> store value >> mas_next_slot(): >> read end metadata >> read old end pivot >> read new end pivot >> return with incorrect range >> set old end pivot >> >> There may be other accesses that are not safe since we are now updating >> both metadata and pointers, so disabling append if there could be rcu >> readers is the safest action. >> >> Fixes: 54a611b60590 ("Maple Tree: add new data structure") >> Cc: stable@vger.kernel.org >> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > ("maple_tree: disable mas_wr_append() when other readers are > possible") in v6.5, and is being backported to stable. > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > following warning: > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > /soc/timer@e803b000: used for clocksource > /soc/timer@e803c000: used for clock events > +------------[ cut here ]------------ > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > +Interrupts were enabled early ... > > I do not see this issue on any other platform > (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > RCU configuration. There's something similar on pmac32 / mac99. > Do you have a clue? It seems something in the maple tree code is setting TIF_NEED_RESCHED, and that causes a subsequent call to cond_resched() to call schedule() and enable interrupts. On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. But I don't see why. cheers ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-31 5:39 ` Michael Ellerman @ 2023-08-31 8:25 ` Geert Uytterhoeven 2023-08-31 8:45 ` Peng Zhang 0 siblings, 1 reply; 43+ messages in thread From: Geert Uytterhoeven @ 2023-08-31 8:25 UTC (permalink / raw) To: Michael Ellerman Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc Hi Michael, On Thu, Aug 31, 2023 at 7:39 AM Michael Ellerman <mpe@ellerman.id.au> wrote: > Geert Uytterhoeven <geert@linux-m68k.org> writes: > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > >> The current implementation of append may cause duplicate data and/or > >> incorrect ranges to be returned to a reader during an update. Although > >> this has not been reported or seen, disable the append write operation > >> while the tree is in rcu mode out of an abundance of caution. > >> > >> During the analysis of the mas_next_slot() the following was > >> artificially created by separating the writer and reader code: > >> > >> Writer: reader: > >> mas_wr_append > >> set end pivot > >> updates end metata > >> Detects write to last slot > >> last slot write is to start of slot > >> store current contents in slot > >> overwrite old end pivot > >> mas_next_slot(): > >> read end metadata > >> read old end pivot > >> return with incorrect range > >> store new value > >> > >> Alternatively: > >> > >> Writer: reader: > >> mas_wr_append > >> set end pivot > >> updates end metata > >> Detects write to last slot > >> last lost write to end of slot > >> store value > >> mas_next_slot(): > >> read end metadata > >> read old end pivot > >> read new end pivot > >> return with incorrect range > >> set old end pivot > >> > >> There may be other accesses that are not safe since we are now updating > >> both metadata and pointers, so disabling append if there could be rcu > >> readers is the safest action. > >> > >> Fixes: 54a611b60590 ("Maple Tree: add new data structure") > >> Cc: stable@vger.kernel.org > >> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > > ("maple_tree: disable mas_wr_append() when other readers are > > possible") in v6.5, and is being backported to stable. > > > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > > following warning: > > > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > > /soc/timer@e803b000: used for clocksource > > /soc/timer@e803c000: used for clock events > > +------------[ cut here ]------------ > > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > > +Interrupts were enabled early > ... > > > > I do not see this issue on any other platform > > (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > > RCU configuration. > > There's something similar on pmac32 / mac99. > > > Do you have a clue? > > It seems something in the maple tree code is setting TIF_NEED_RESCHED, > and that causes a subsequent call to cond_resched() to call schedule() > and enable interrupts. > > On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. > But I don't see why. Enabling CONFIG_DEBUG_ATOMIC_SLEEP on RZ/A1 and RZ/A2 does fix the problem. But there must be more to it, as some of my test configs had it enabled, and others hadn't, while only RZ/A showed the issue. I tried disabling it on R-Car M2-W (arm32) and R-Car H3 (arm64), and that did not cause the problem to happen... Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-31 8:25 ` Geert Uytterhoeven @ 2023-08-31 8:45 ` Peng Zhang 2023-08-31 9:43 ` Geert Uytterhoeven 0 siblings, 1 reply; 43+ messages in thread From: Peng Zhang @ 2023-08-31 8:45 UTC (permalink / raw) To: Geert Uytterhoeven, Michael Ellerman Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc 在 2023/8/31 16:25, Geert Uytterhoeven 写道: > Hi Michael, > > On Thu, Aug 31, 2023 at 7:39 AM Michael Ellerman <mpe@ellerman.id.au> wrote: >> Geert Uytterhoeven <geert@linux-m68k.org> writes: >>> On Fri, 18 Aug 2023, Liam R. Howlett wrote: >>>> The current implementation of append may cause duplicate data and/or >>>> incorrect ranges to be returned to a reader during an update. Although >>>> this has not been reported or seen, disable the append write operation >>>> while the tree is in rcu mode out of an abundance of caution. >>>> >>>> During the analysis of the mas_next_slot() the following was >>>> artificially created by separating the writer and reader code: >>>> >>>> Writer: reader: >>>> mas_wr_append >>>> set end pivot >>>> updates end metata >>>> Detects write to last slot >>>> last slot write is to start of slot >>>> store current contents in slot >>>> overwrite old end pivot >>>> mas_next_slot(): >>>> read end metadata >>>> read old end pivot >>>> return with incorrect range >>>> store new value >>>> >>>> Alternatively: >>>> >>>> Writer: reader: >>>> mas_wr_append >>>> set end pivot >>>> updates end metata >>>> Detects write to last slot >>>> last lost write to end of slot >>>> store value >>>> mas_next_slot(): >>>> read end metadata >>>> read old end pivot >>>> read new end pivot >>>> return with incorrect range >>>> set old end pivot >>>> >>>> There may be other accesses that are not safe since we are now updating >>>> both metadata and pointers, so disabling append if there could be rcu >>>> readers is the safest action. >>>> >>>> Fixes: 54a611b60590 ("Maple Tree: add new data structure") >>>> Cc: stable@vger.kernel.org >>>> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> >>> >>> Thanks for your patch, which is now commit cfeb6ae8bcb96ccf >>> ("maple_tree: disable mas_wr_append() when other readers are >>> possible") in v6.5, and is being backported to stable. >>> >>> On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the >>> following warning: >>> >>> clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns >>> sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns >>> /soc/timer@e803b000: used for clocksource >>> /soc/timer@e803c000: used for clock events >>> +------------[ cut here ]------------ >>> +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 >>> +Interrupts were enabled early >> ... >>> >>> I do not see this issue on any other platform >>> (arm/arm64/risc-v/mips/sh/m68k), several of them use the same >>> RCU configuration. >> >> There's something similar on pmac32 / mac99. >> >>> Do you have a clue? >> >> It seems something in the maple tree code is setting TIF_NEED_RESCHED, >> and that causes a subsequent call to cond_resched() to call schedule() >> and enable interrupts. >> >> On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. >> But I don't see why. > > Enabling CONFIG_DEBUG_ATOMIC_SLEEP on RZ/A1 and RZ/A2 does > fix the problem. > But there must be more to it, as some of my test configs had it enabled, > and others hadn't, while only RZ/A showed the issue. > I tried disabling it on R-Car M2-W (arm32) and R-Car H3 (arm64), and > that did not cause the problem to happen... I guess this patch triggers a potential problem with the maple tree. I don't have the environment to trigger the problem. Can you apply the following patch to see if the problem still exists? This can help locate the root cause. At least narrow down the scope of the code that has bug. Thanks. diff --git a/lib/maple_tree.c b/lib/maple_tree.c index f723024e1426..1b4b6f6e3095 100644 --- a/lib/maple_tree.c +++ b/lib/maple_tree.c @@ -4351,9 +4351,6 @@ static inline void mas_wr_modify(struct ma_wr_state *wr_mas) if (new_end == wr_mas->node_end && mas_wr_slot_store(wr_mas)) return; - if (mas_wr_node_store(wr_mas, new_end)) - return; - if (mas_is_err(mas)) return; > > Gr{oetje,eeting}s, > > Geert > ^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-31 8:45 ` Peng Zhang @ 2023-08-31 9:43 ` Geert Uytterhoeven 0 siblings, 0 replies; 43+ messages in thread From: Geert Uytterhoeven @ 2023-08-31 9:43 UTC (permalink / raw) To: Peng Zhang Cc: Michael Ellerman, Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc Hi Peng, On Thu, Aug 31, 2023 at 10:45 AM Peng Zhang <zhangpeng.00@bytedance.com> wrote: > 在 2023/8/31 16:25, Geert Uytterhoeven 写道: > > On Thu, Aug 31, 2023 at 7:39 AM Michael Ellerman <mpe@ellerman.id.au> wrote: > >> Geert Uytterhoeven <geert@linux-m68k.org> writes: > >>> On Fri, 18 Aug 2023, Liam R. Howlett wrote: > >>>> The current implementation of append may cause duplicate data and/or > >>>> incorrect ranges to be returned to a reader during an update. Although > >>>> this has not been reported or seen, disable the append write operation > >>>> while the tree is in rcu mode out of an abundance of caution. > >>>> > >>>> During the analysis of the mas_next_slot() the following was > >>>> artificially created by separating the writer and reader code: > >>>> > >>>> Writer: reader: > >>>> mas_wr_append > >>>> set end pivot > >>>> updates end metata > >>>> Detects write to last slot > >>>> last slot write is to start of slot > >>>> store current contents in slot > >>>> overwrite old end pivot > >>>> mas_next_slot(): > >>>> read end metadata > >>>> read old end pivot > >>>> return with incorrect range > >>>> store new value > >>>> > >>>> Alternatively: > >>>> > >>>> Writer: reader: > >>>> mas_wr_append > >>>> set end pivot > >>>> updates end metata > >>>> Detects write to last slot > >>>> last lost write to end of slot > >>>> store value > >>>> mas_next_slot(): > >>>> read end metadata > >>>> read old end pivot > >>>> read new end pivot > >>>> return with incorrect range > >>>> set old end pivot > >>>> > >>>> There may be other accesses that are not safe since we are now updating > >>>> both metadata and pointers, so disabling append if there could be rcu > >>>> readers is the safest action. > >>>> > >>>> Fixes: 54a611b60590 ("Maple Tree: add new data structure") > >>>> Cc: stable@vger.kernel.org > >>>> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > >>> > >>> Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > >>> ("maple_tree: disable mas_wr_append() when other readers are > >>> possible") in v6.5, and is being backported to stable. > >>> > >>> On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > >>> following warning: > >>> > >>> clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > >>> sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > >>> /soc/timer@e803b000: used for clocksource > >>> /soc/timer@e803c000: used for clock events > >>> +------------[ cut here ]------------ > >>> +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > >>> +Interrupts were enabled early > >> ... > >>> > >>> I do not see this issue on any other platform > >>> (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > >>> RCU configuration. > >> > >> There's something similar on pmac32 / mac99. > >> > >>> Do you have a clue? > >> > >> It seems something in the maple tree code is setting TIF_NEED_RESCHED, > >> and that causes a subsequent call to cond_resched() to call schedule() > >> and enable interrupts. > >> > >> On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. > >> But I don't see why. > > > > Enabling CONFIG_DEBUG_ATOMIC_SLEEP on RZ/A1 and RZ/A2 does > > fix the problem. > > But there must be more to it, as some of my test configs had it enabled, > > and others hadn't, while only RZ/A showed the issue. > > I tried disabling it on R-Car M2-W (arm32) and R-Car H3 (arm64), and > > that did not cause the problem to happen... > > I guess this patch triggers a potential problem with the maple tree. > I don't have the environment to trigger the problem. Can you apply the > following patch to see if the problem still exists? This can help locate > the root cause. At least narrow down the scope of the code that has bug. Thanks for your suggestion! > diff --git a/lib/maple_tree.c b/lib/maple_tree.c > index f723024e1426..1b4b6f6e3095 100644 > --- a/lib/maple_tree.c > +++ b/lib/maple_tree.c > @@ -4351,9 +4351,6 @@ static inline void mas_wr_modify(struct > ma_wr_state *wr_mas) > if (new_end == wr_mas->node_end && mas_wr_slot_store(wr_mas)) > return; > > - if (mas_wr_node_store(wr_mas, new_end)) > - return; > - > if (mas_is_err(mas)) > return; Unfortunately removing these lines does not help. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-29 16:42 ` Geert Uytterhoeven 2023-08-31 5:39 ` Michael Ellerman @ 2023-09-06 15:23 ` Liam R. Howlett 2023-09-06 17:23 ` Paul E. McKenney 2023-09-06 19:06 ` Geert Uytterhoeven 2023-09-11 12:27 ` Linux regression tracking #adding (Thorsten Leemhuis) 2 siblings, 2 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-06 15:23 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni, Paul E. McKenney [-- Attachment #1: Type: text/plain, Size: 4337 bytes --] (Adding Paul & Shanker to Cc list.. please see below for why) Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment. * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > Hi Liam, > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > The current implementation of append may cause duplicate data and/or > > incorrect ranges to be returned to a reader during an update. Although > > this has not been reported or seen, disable the append write operation > > while the tree is in rcu mode out of an abundance of caution. ... > > > > Fixes: 54a611b60590 ("Maple Tree: add new data structure") > > Cc: stable@vger.kernel.org > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > ("maple_tree: disable mas_wr_append() when other readers are > possible") in v6.5, and is being backported to stable. > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > following warning: > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > /soc/timer@e803b000: used for clocksource > /soc/timer@e803c000: used for clock events > +------------[ cut here ]------------ > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > +Interrupts were enabled early Note that the maple tree is involved in tracking the interrupts, see kernel/irq/irqdesc.c irq_insert_desc(), etc. > +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 I cannot find commit id 99b80d6b92b5. > +Hardware name: Generic R7S9210 (Flattened Device Tree) > + unwind_backtrace from show_stack+0x10/0x14 > + show_stack from dump_stack_lvl+0x24/0x3c > + dump_stack_lvl from __warn+0x74/0xb8 > + __warn from warn_slowpath_fmt+0x78/0xb0 > + warn_slowpath_fmt from start_kernel+0x2f0/0x480 > + start_kernel from 0x0 > +---[ end trace 0000000000000000 ]--- > Console: colour dummy device 80x30 > printk: console [tty0] enabled > Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000) > > Reverting this commit fixes the issue. I have set up testing with qemu for powerpc 32b, and reverting this patch does not fix it for me. Did you revert the patch or bisect to the issue? It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is as follows: qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048 -hda powerpc32.img -nographic -kernel <file> > > RCU-related configs: > > $ grep RCU .config > # RCU Subsystem > CONFIG_TINY_RCU=y > # CONFIG_RCU_EXPERT is not set > CONFIG_TINY_SRCU=y > # end of RCU Subsystem > # RCU Debugging > # CONFIG_RCU_SCALE_TEST is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_RCU_REF_SCALE_TEST is not set > # CONFIG_RCU_TRACE is not set > # CONFIG_RCU_EQS_DEBUG is not set > # end of RCU Debugging I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration. > > CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, > as CONFIG_* is reserved for kernel configuration options). Thanks, I'll add it to my list of work. > > I do not see this issue on any other platform > (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > RCU configuration. > > Do you have a clue? It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning. I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that? I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case? Thanks, Liam [-- Attachment #2: config-3.16.0-6-powerpc --] [-- Type: text/plain, Size: 200900 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/powerpc 6.5.0-rc4 Kernel Configuration # CONFIG_CC_VERSION_TEXT="powerpc-linux-gnu-gcc (Debian 13.2.0-2) 13.2.0" CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=130200 CONFIG_CLANG_VERSION=0 CONFIG_AS_IS_GNU=y CONFIG_AS_VERSION=24100 CONFIG_LD_IS_BFD=y CONFIG_LD_VERSION=24100 CONFIG_LLD_VERSION=0 CONFIG_CC_CAN_LINK=y CONFIG_CC_CAN_LINK_STATIC=y CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=124 CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y # # General setup # CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set # CONFIG_WERROR is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_BUILD_SALT="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_XZ is not set CONFIG_DEFAULT_INIT="" CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_WATCH_QUEUE is not set CONFIG_CROSS_MEMORY_ATTACH=y # CONFIG_USELIB is not set CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y CONFIG_AUDITSYSCALL=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_IRQ_INJECTION=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set # end of IRQ subsystem CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # end of Timers subsystem CONFIG_BPF=y CONFIG_HAVE_EBPF_JIT=y CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y # # BPF subsystem # # CONFIG_BPF_SYSCALL is not set # CONFIG_BPF_JIT is not set # end of BPF subsystem CONFIG_PREEMPT_VOLUNTARY_BUILD=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y # CONFIG_PSI is not set # end of CPU/Task time and stats accounting # # RCU Subsystem # CONFIG_TINY_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_TINY_SRCU=y CONFIG_TASKS_RCU_GENERIC=y CONFIG_TASKS_RUDE_RCU=y CONFIG_RCU_NEED_SEGCBLIST=y # end of RCU Subsystem # CONFIG_IKCONFIG is not set # CONFIG_IKHEADERS is not set CONFIG_LOG_BUF_SHIFT=17 # CONFIG_PRINTK_INDEX is not set # # Scheduler features # # end of Scheduler features CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC11_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_CGROUPS=y CONFIG_PAGE_COUNTER=y # CONFIG_CGROUP_FAVOR_DYNMODS is not set CONFIG_MEMCG=y CONFIG_MEMCG_KMEM=y CONFIG_BLK_CGROUP=y CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set # CONFIG_CGROUP_PIDS is not set # CONFIG_CGROUP_RDMA is not set CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y # CONFIG_CGROUP_MISC is not set # CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_TIME_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y CONFIG_RD_ZSTD=y # CONFIG_BOOT_CONFIG is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y # CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set CONFIG_LD_ORPHAN_WARN=y CONFIG_LD_ORPHAN_WARN_LEVEL="warn" CONFIG_SYSCTL=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_SELFTEST is not set # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_KCMP=y CONFIG_RSEQ=y CONFIG_CACHESTAT_SYSCALL=y # CONFIG_DEBUG_RSEQ is not set # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # CONFIG_PC104 is not set # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # end of Kernel Performance Events And Counters CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y # end of General setup CONFIG_PPC32=y # CONFIG_PPC64 is not set # # Processor support # CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set CONFIG_PPC_BOOK3S_603=y CONFIG_PPC_BOOK3S_604=y CONFIG_POWERPC_CPU=y # CONFIG_E300C2_CPU is not set # CONFIG_E300C3_CPU is not set # CONFIG_G4_CPU is not set # CONFIG_TOOLCHAIN_DEFAULT_CPU is not set CONFIG_TARGET_CPU_BOOL=y CONFIG_TARGET_CPU="powerpc" CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU_REGS=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_KUEP=y CONFIG_PPC_KUAP=y # CONFIG_PPC_KUAP_DEBUG is not set CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_PMU_SYSFS is not set CONFIG_PPC_PERF_CTRS=y # CONFIG_SMP is not set CONFIG_NR_CPUS=1 # end of Processor support CONFIG_VDSO32=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_32BIT=y CONFIG_MMU=y CONFIG_ARCH_MMAP_RND_BITS_MAX=17 CONFIG_ARCH_MMAP_RND_BITS_MIN=11 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 CONFIG_NR_IRQS=512 CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_PANIC_TIMEOUT=0 CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_HAS_ADD_PAGES=y # CONFIG_PPC_PCI_OF_BUS_MAP is not set CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_PGTABLE_LEVELS=2 CONFIG_PPC_MSI_BITMAP=y # # Platform support # # CONFIG_SCOM_DEBUGFS is not set CONFIG_PPC_CHRP=y # CONFIG_PPC_MPC512x is not set CONFIG_PPC_MPC52xx=y # CONFIG_PPC_MPC5200_SIMPLE is not set CONFIG_PPC_EFIKA=y # CONFIG_PPC_LITE5200 is not set # CONFIG_PPC_MEDIA5200 is not set CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_PMAC=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set # CONFIG_AMIGAONE is not set CONFIG_KVM_GUEST=y CONFIG_EPAPR_PARAVIRT=y CONFIG_PPC_HASH_MMU_NATIVE=y CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_MPIC=y # CONFIG_MPIC_MSGR is not set CONFIG_PPC_I8259=y CONFIG_PPC_RTAS=y CONFIG_RTAS_ERROR_LOGGING=y CONFIG_PPC_RTAS_DAEMON=y CONFIG_RTAS_PROC=y CONFIG_PPC_MPC106=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPU frequency scaling drivers # # CONFIG_CPUFREQ_DT is not set # CONFIG_CPUFREQ_DT_PLATDEV is not set CONFIG_CPU_FREQ_PMAC=y # end of CPU Frequency scaling # # CPUIdle driver # # # CPU Idle # # CONFIG_CPU_IDLE is not set # end of CPU Idle # end of CPUIdle driver CONFIG_TAU=y # CONFIG_TAU_INT is not set # CONFIG_TAU_AVERAGE is not set # CONFIG_GEN_RTC is not set # end of Platform support # # Kernel options # CONFIG_HIGHMEM=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_PPC_4K_PAGES=y CONFIG_PAGE_SIZE_4KB=y CONFIG_PPC_PAGE_SHIFT=12 CONFIG_THREAD_SHIFT=13 CONFIG_DATA_SHIFT=12 CONFIG_ARCH_FORCE_MAX_ORDER=10 CONFIG_CMDLINE="console=ttyS0,9600 console=tty0" CONFIG_CMDLINE_FROM_BOOTLOADER=y # CONFIG_CMDLINE_EXTEND is not set # CONFIG_CMDLINE_FORCE is not set CONFIG_EXTRA_TARGETS="" CONFIG_ARCH_WANTS_FREEZER_CONTROL=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_SUSPEND_SKIP_SYNC is not set CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y CONFIG_HIBERNATION_SNAPSHOT_DEV=y CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_USERSPACE_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_PM_SLEEP_DEBUG=y CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set # end of Kernel options CONFIG_ISA_DMA_API=y # # Bus options # # CONFIG_ISA is not set CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y # CONFIG_FSL_LBC is not set # end of Bus options # # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xb0000000 # end of Advanced setup CONFIG_PPC_LIB_RHEAP=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM_BOOK3S_32 is not set CONFIG_HAVE_LIVEPATCH=y # # General architecture-dependent options # CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y # CONFIG_STATIC_KEYS_SELFTEST is not set # CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=y CONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_MMU_GATHER_PAGE_SIZE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y CONFIG_MMU_LAZY_TLB_REFCOUNT=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=y CONFIG_SECCOMP_FILTER=y # CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_LTO_NONE=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING_USER=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_ARCH_MMAP_RND_BITS=11 CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_HAVE_OBJTOOL=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_HAVE_ARCH_NVRAM_OPS=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND=y CONFIG_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET=y # CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y CONFIG_ARCH_HAS_PHYS_TO_DMA=y # CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_HAVE_STATIC_CALL=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_SPLIT_ARG64=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y # end of GCOV-based kernel profiling CONFIG_HAVE_GCC_PLUGINS=y CONFIG_FUNCTION_ALIGNMENT=0 # end of General architecture-dependent options CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_DEBUG is not set CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set CONFIG_MODVERSIONS=y CONFIG_ASM_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set CONFIG_MODULE_COMPRESS_NONE=y # CONFIG_MODULE_COMPRESS_GZIP is not set # CONFIG_MODULE_COMPRESS_XZ is not set # CONFIG_MODULE_COMPRESS_ZSTD is not set # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe" # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_CGROUP_PUNT_BIO=y CONFIG_BLK_DEV_BSG_COMMON=y CONFIG_BLK_ICQ=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=m # CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_DEV_THROTTLING_LOW is not set # CONFIG_BLK_WBT is not set # CONFIG_BLK_CGROUP_IOLATENCY is not set # CONFIG_BLK_CGROUP_IOCOST is not set # CONFIG_BLK_CGROUP_IOPRIO is not set CONFIG_BLK_DEBUG_FS=y # CONFIG_BLK_SED_OPAL is not set # CONFIG_BLK_INLINE_ENCRYPTION is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # end of Partition Types CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y CONFIG_BLK_PM=y CONFIG_BLOCK_HOLDER_DEPRECATED=y CONFIG_BLK_MQ_STACKING=y # # IO Schedulers # CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y CONFIG_IOSCHED_BFQ=m CONFIG_BFQ_GROUP_IOSCHED=y # CONFIG_BFQ_CGROUP_DEBUG is not set # end of IO Schedulers CONFIG_ASN1=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y CONFIG_FREEZER=y # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y # end of Executable file formats # # Memory Management options # CONFIG_ZPOOL=y CONFIG_SWAP=y CONFIG_ZSWAP=y # CONFIG_ZSWAP_DEFAULT_ON is not set # CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y # CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y # CONFIG_Z3FOLD is not set CONFIG_ZSMALLOC=y # CONFIG_ZSMALLOC_STAT is not set CONFIG_ZSMALLOC_CHAIN_SIZE=8 # # SLAB allocator options # # CONFIG_SLAB_DEPRECATED is not set CONFIG_SLUB=y # CONFIG_SLUB_TINY is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set # CONFIG_SLAB_FREELIST_HARDENED is not set # CONFIG_SLUB_STATS is not set # end of SLAB allocator options # CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set # CONFIG_COMPAT_BRK is not set CONFIG_FLATMEM=y CONFIG_HAVE_FAST_GUP=y CONFIG_ARCH_KEEP_MEMBLOCK=y CONFIG_EXCLUSIVE_SYSTEM_RAM=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MEMORY_BALLOON=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 CONFIG_PAGE_REPORTING=y CONFIG_MIGRATION=y CONFIG_BOUNCE=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NEED_PER_CPU_KM=y CONFIG_FRONTSWAP=y # CONFIG_CMA is not set CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_IDLE_PAGE_TRACKING is not set CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y CONFIG_ZONE_DMA=y CONFIG_HMM_MIRROR=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_TEST is not set # CONFIG_DMAPOOL_TEST is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y CONFIG_KMAP_LOCAL=y # CONFIG_ANON_VMA_NAME is not set # CONFIG_USERFAULTFD is not set # CONFIG_LRU_GEN is not set CONFIG_LOCK_MM_AND_FIND_VMA=y # # Data Access Monitoring # # CONFIG_DAMON is not set # end of Data Access Monitoring # end of Memory Management options CONFIG_NET=y CONFIG_NET_INGRESS=y CONFIG_NET_EGRESS=y CONFIG_NET_REDIRECT=y CONFIG_SKB_EXTENSIONS=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=m CONFIG_UNIX=y CONFIG_UNIX_SCM=y CONFIG_AF_UNIX_OOB=y CONFIG_UNIX_DIAG=m # CONFIG_TLS is not set CONFIG_XFRM=y CONFIG_XFRM_ALGO=m CONFIG_XFRM_USER=m # CONFIG_XFRM_INTERFACE is not set CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_AH=m CONFIG_XFRM_ESP=m CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y # CONFIG_SMC is not set CONFIG_NET_HANDSHAKE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_FIB_TRIE_STATS=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_CLASSID=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IP_TUNNEL=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE_COMMON=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_NET_UDP_TUNNEL=m # CONFIG_NET_FOU is not set # CONFIG_NET_FOU_IP_TUNNELS is not set CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_ESP_OFFLOAD is not set # CONFIG_INET_ESPINTCP is not set CONFIG_INET_IPCOMP=m CONFIG_INET_TABLE_PERTURB_ORDER=16 CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_INET_UDP_DIAG=m # CONFIG_INET_RAW_DIAG is not set # CONFIG_INET_DIAG_DESTROY is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m # CONFIG_TCP_CONG_NV is not set CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_TCP_CONG_DCTCP is not set # CONFIG_TCP_CONG_CDG is not set # CONFIG_TCP_CONG_BBR is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m # CONFIG_INET6_ESP_OFFLOAD is not set # CONFIG_INET6_ESPINTCP is not set CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=y # CONFIG_IPV6_ILA is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_VTI=m CONFIG_IPV6_SIT=m CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_GRE=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_IPV6_PIMSM_V2=y # CONFIG_IPV6_SEG6_LWTUNNEL is not set # CONFIG_IPV6_SEG6_HMAC is not set # CONFIG_IPV6_RPL_LWTUNNEL is not set # CONFIG_IPV6_IOAM6_LWTUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_MPTCP is not set CONFIG_NETWORK_SECMARK=y CONFIG_NET_PTP_CLASSIFY=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=m # # Core Netfilter Configuration # CONFIG_NETFILTER_INGRESS=y CONFIG_NETFILTER_EGRESS=y CONFIG_NETFILTER_SKIP_EGRESS=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_FAMILY_BRIDGE=y CONFIG_NETFILTER_FAMILY_ARP=y # CONFIG_NETFILTER_NETLINK_HOOK is not set CONFIG_NETFILTER_NETLINK_ACCT=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NETFILTER_NETLINK_OSF=m CONFIG_NF_CONNTRACK=m CONFIG_NF_LOG_SYSLOG=m CONFIG_NETFILTER_CONNCOUNT=m CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_ZONES=y CONFIG_NF_CONNTRACK_PROCFS=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CONNTRACK_TIMEOUT=y CONFIG_NF_CONNTRACK_TIMESTAMP=y CONFIG_NF_CONNTRACK_LABELS=y CONFIG_NF_CONNTRACK_OVS=y CONFIG_NF_CT_PROTO_DCCP=y CONFIG_NF_CT_PROTO_GRE=y CONFIG_NF_CT_PROTO_SCTP=y CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_BROADCAST=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m CONFIG_NF_CT_NETLINK_TIMEOUT=m # CONFIG_NETFILTER_NETLINK_GLUE_CT is not set CONFIG_NF_NAT=m CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_SIP=m CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_REDIRECT=y CONFIG_NF_NAT_OVS=y CONFIG_NETFILTER_SYNPROXY=m CONFIG_NF_TABLES=m # CONFIG_NF_TABLES_INET is not set # CONFIG_NF_TABLES_NETDEV is not set # CONFIG_NFT_NUMGEN is not set CONFIG_NFT_CT=m # CONFIG_NFT_CONNLIMIT is not set CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m # CONFIG_NFT_MASQ is not set # CONFIG_NFT_REDIR is not set # CONFIG_NFT_TUNNEL is not set CONFIG_NFT_QUEUE=m # CONFIG_NFT_QUOTA is not set CONFIG_NFT_REJECT=m CONFIG_NFT_COMPAT=m CONFIG_NFT_HASH=m # CONFIG_NFT_XFRM is not set # CONFIG_NFT_SOCKET is not set # CONFIG_NFT_OSF is not set # CONFIG_NFT_TPROXY is not set # CONFIG_NFT_SYNPROXY is not set # CONFIG_NF_FLOW_TABLE is not set CONFIG_NETFILTER_XTABLES=m # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=m CONFIG_NETFILTER_XT_CONNMARK=m CONFIG_NETFILTER_XT_SET=m # # Xtables targets # CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_CT=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_HMARK=m CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m # CONFIG_NETFILTER_XT_NAT is not set CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m # CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CGROUP=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_CPU=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ECN=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPCOMP=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_IPVS=m CONFIG_NETFILTER_XT_MATCH_L2TP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_NFACCT=m CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m # end of Core Netfilter Configuration CONFIG_IP_SET=m CONFIG_IP_SET_MAX=256 CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set CONFIG_IP_SET_HASH_NETPORTNET=m CONFIG_IP_SET_HASH_NET=m CONFIG_IP_SET_HASH_NETNET=m CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m CONFIG_IP_VS_IPV6=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y CONFIG_IP_VS_PROTO_SCTP=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m # CONFIG_IP_VS_FO is not set # CONFIG_IP_VS_OVF is not set CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m # CONFIG_IP_VS_MH is not set CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # CONFIG_IP_VS_TWOS is not set # # IPVS SH scheduler # CONFIG_IP_VS_SH_TAB_BITS=8 # # IPVS MH scheduler # CONFIG_IP_VS_MH_TAB_INDEX=12 # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IP_VS_NFCT=y CONFIG_IP_VS_PE_SIP=m # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_SOCKET_IPV4=m CONFIG_NF_TPROXY_IPV4=m # CONFIG_NF_TABLES_IPV4 is not set # CONFIG_NF_TABLES_ARP is not set CONFIG_NF_DUP_IPV4=m # CONFIG_NF_LOG_ARP is not set # CONFIG_NF_LOG_IPV4 is not set CONFIG_NF_REJECT_IPV4=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_SYNPROXY=m # CONFIG_IP_NF_NAT is not set CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # CONFIG_NF_SOCKET_IPV6=m CONFIG_NF_TPROXY_IPV6=m # CONFIG_NF_TABLES_IPV6 is not set CONFIG_NF_DUP_IPV6=m CONFIG_NF_REJECT_IPV6=m CONFIG_NF_LOG_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m # CONFIG_IP6_NF_MATCH_SRH is not set CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_TARGET_SYNPROXY=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m # CONFIG_IP6_NF_NAT is not set # end of IPv6: Netfilter Configuration CONFIG_NF_DEFRAG_IPV6=m CONFIG_NF_TABLES_BRIDGE=m CONFIG_NFT_BRIDGE_META=m # CONFIG_NFT_BRIDGE_REJECT is not set # CONFIG_NF_CONNTRACK_BRIDGE is not set CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_NFLOG=m # CONFIG_BPFILTER is not set CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m # # DCCP CCIDs Configuration # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_TFRC_LIB=y # end of DCCP CCIDs Configuration # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set # end of DCCP Kernel Hacking CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m # CONFIG_RDS_DEBUG is not set CONFIG_TIPC=m CONFIG_TIPC_MEDIA_IB=y CONFIG_TIPC_MEDIA_UDP=y CONFIG_TIPC_CRYPTO=y CONFIG_TIPC_DIAG=m CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_L2TP_V3=y CONFIG_L2TP_IP=m CONFIG_L2TP_ETH=m CONFIG_STP=m CONFIG_GARP=m CONFIG_MRP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y # CONFIG_BRIDGE_MRP is not set # CONFIG_BRIDGE_CFM is not set # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y CONFIG_LLC=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y # CONFIG_X25 is not set CONFIG_LAPB=m CONFIG_PHONET=m # CONFIG_6LOWPAN is not set CONFIG_IEEE802154=m # CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m # CONFIG_MAC802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m # CONFIG_NET_SCH_CBS is not set # CONFIG_NET_SCH_ETF is not set CONFIG_NET_SCH_MQPRIO_LIB=m # CONFIG_NET_SCH_TAPRIO is not set CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m # CONFIG_NET_SCH_SKBPRIO is not set CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_QFQ=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_FQ_CODEL=m # CONFIG_NET_SCH_CAKE is not set CONFIG_NET_SCH_FQ=m CONFIG_NET_SCH_HHF=m CONFIG_NET_SCH_PIE=m # CONFIG_NET_SCH_FQ_PIE is not set CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_PLUG=m # CONFIG_NET_SCH_ETS is not set # CONFIG_NET_SCH_DEFAULT is not set # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=m CONFIG_NET_CLS_BPF=m # CONFIG_NET_CLS_FLOWER is not set # CONFIG_NET_CLS_MATCHALL is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_EMATCH_CANID=m CONFIG_NET_EMATCH_IPSET=m # CONFIG_NET_EMATCH_IPT is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m # CONFIG_NET_ACT_SAMPLE is not set CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m # CONFIG_NET_ACT_MPLS is not set # CONFIG_NET_ACT_VLAN is not set # CONFIG_NET_ACT_BPF is not set # CONFIG_NET_ACT_CONNMARK is not set # CONFIG_NET_ACT_CTINFO is not set # CONFIG_NET_ACT_SKBMOD is not set # CONFIG_NET_ACT_IFE is not set # CONFIG_NET_ACT_TUNNEL_KEY is not set # CONFIG_NET_ACT_GATE is not set # CONFIG_NET_TC_SKB_EXT is not set CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=m CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_BATMAN_V=y CONFIG_BATMAN_ADV_BLA=y CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y CONFIG_BATMAN_ADV_MCAST=y # CONFIG_BATMAN_ADV_DEBUG is not set # CONFIG_BATMAN_ADV_TRACING is not set CONFIG_OPENVSWITCH=m CONFIG_OPENVSWITCH_GRE=m CONFIG_OPENVSWITCH_VXLAN=m # CONFIG_VSOCKETS is not set CONFIG_NETLINK_DIAG=m CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=y # CONFIG_MPLS_ROUTING is not set CONFIG_NET_NSH=m # CONFIG_HSR is not set # CONFIG_NET_SWITCHDEV is not set # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_QRTR is not set # CONFIG_NET_NCSI is not set CONFIG_MAX_SKB_FRAGS=17 CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # # Network testing # CONFIG_NET_PKTGEN=m CONFIG_NET_DROP_MONITOR=m # end of Network testing # end of Networking options CONFIG_HAMRADIO=y # # Packet Radio protocols # CONFIG_AX25=m CONFIG_AX25_DAMA_SLAVE=y CONFIG_NETROM=m CONFIG_ROSE=m # # AX.25 network device drivers # CONFIG_MKISS=m CONFIG_6PACK=m CONFIG_BPQETHER=m CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_BAYCOM_EPP=m CONFIG_YAM=m # end of AX.25 network device drivers CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m # CONFIG_CAN_J1939 is not set # CONFIG_CAN_ISOTP is not set CONFIG_BT=m CONFIG_BT_BREDR=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m # CONFIG_BT_HS is not set CONFIG_BT_LE=y CONFIG_BT_LE_L2CAP_ECRED=y # CONFIG_BT_LEDS is not set # CONFIG_BT_MSFTEXT is not set # CONFIG_BT_AOSPEXT is not set CONFIG_BT_DEBUGFS=y # CONFIG_BT_SELFTEST is not set # # Bluetooth device drivers # CONFIG_BT_INTEL=m CONFIG_BT_BCM=m CONFIG_BT_RTL=m CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set CONFIG_BT_HCIBTUSB_POLL_SYNC=y CONFIG_BT_HCIBTUSB_BCM=y # CONFIG_BT_HCIBTUSB_MTK is not set CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y # CONFIG_BT_HCIUART_INTEL is not set # CONFIG_BT_HCIUART_AG6XX is not set CONFIG_BT_HCIBCM203X=m # CONFIG_BT_HCIBCM4377 is not set CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m CONFIG_BT_ATH3K=m # CONFIG_BT_MTKSDIO is not set CONFIG_BT_HCIRSI=m # CONFIG_BT_VIRTIO is not set # end of Bluetooth device drivers CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_IPV6 is not set # CONFIG_AF_RXRPC_INJECT_LOSS is not set # CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set # CONFIG_AF_RXRPC_DEBUG is not set # CONFIG_RXKAD is not set # CONFIG_RXPERF is not set # CONFIG_AF_KCM is not set # CONFIG_MCTP is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set CONFIG_CFG80211_CRDA_SUPPORT=y CONFIG_CFG80211_WEXT=y CONFIG_CFG80211_WEXT_EXPORT=y CONFIG_LIB80211=m CONFIG_LIB80211_CRYPT_WEP=m CONFIG_LIB80211_CRYPT_CCMP=m CONFIG_LIB80211_CRYPT_TKIP=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 CONFIG_RFKILL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y # CONFIG_RFKILL_GPIO is not set CONFIG_NET_9P=m CONFIG_NET_9P_FD=m CONFIG_NET_9P_VIRTIO=m CONFIG_NET_9P_RDMA=m # CONFIG_NET_9P_DEBUG is not set # CONFIG_CAIF is not set CONFIG_CEPH_LIB=m # CONFIG_CEPH_LIB_PRETTYDEBUG is not set # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set CONFIG_NFC=m CONFIG_NFC_DIGITAL=m # CONFIG_NFC_NCI is not set # CONFIG_NFC_HCI is not set # # Near Field Communication (NFC) devices # # CONFIG_NFC_TRF7970A is not set CONFIG_NFC_SIM=m CONFIG_NFC_PORT100=m # CONFIG_NFC_PN533_USB is not set # CONFIG_NFC_PN533_I2C is not set # CONFIG_NFC_ST95HF is not set # end of Near Field Communication (NFC) devices # CONFIG_PSAMPLE is not set # CONFIG_NET_IFE is not set # CONFIG_LWTUNNEL is not set CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y CONFIG_NET_SELFTESTS=m CONFIG_NET_DEVLINK=y CONFIG_PAGE_POOL=y # CONFIG_PAGE_POOL_STATS is not set CONFIG_FAILOVER=m CONFIG_ETHTOOL_NETLINK=y # # Device Drivers # CONFIG_HAVE_PCI=y CONFIG_FORCE_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCIEAER_INJECT=m # CONFIG_PCIE_ECRC is not set CONFIG_PCIEASPM=y CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PME=y # CONFIG_PCIE_DPC is not set # CONFIG_PCIE_PTM is not set CONFIG_PCI_MSI=y CONFIG_PCI_MSI_ARCH_FALLBACKS=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_REALLOC_ENABLE_AUTO=y CONFIG_PCI_STUB=m # CONFIG_PCI_PF_STUB is not set CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y # CONFIG_PCI_PRI is not set # CONFIG_PCI_PASID is not set # CONFIG_PCIE_BUS_TUNE_OFF is not set CONFIG_PCIE_BUS_DEFAULT=y # CONFIG_PCIE_BUS_SAFE is not set # CONFIG_PCIE_BUS_PERFORMANCE is not set # CONFIG_PCIE_BUS_PEER2PEER is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_HOTPLUG_PCI is not set # # PCI controller drivers # # CONFIG_PCI_FTPCI100 is not set # CONFIG_PCI_HOST_GENERIC is not set # CONFIG_PCIE_MICROCHIP_HOST is not set # CONFIG_PCIE_XILINX is not set # # Cadence-based PCIe controllers # # CONFIG_PCIE_CADENCE_PLAT_HOST is not set # CONFIG_PCI_J721E_HOST is not set # end of Cadence-based PCIe controllers # # DesignWare-based PCIe controllers # # CONFIG_PCI_MESON is not set # CONFIG_PCIE_DW_PLAT_HOST is not set # end of DesignWare-based PCIe controllers # # Mobiveil-based PCIe controllers # # end of Mobiveil-based PCIe controllers # end of PCI controller drivers # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set # end of PCI Endpoint # # PCI switch controller drivers # # CONFIG_PCI_SW_SWITCHTEC is not set # end of PCI switch controller drivers # CONFIG_CXL_BUS is not set CONFIG_PCCARD=m CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=y # CONFIG_RAPIDIO is not set # # Generic Driver Options # CONFIG_AUXILIARY_BUS=y CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y # CONFIG_DEVTMPFS_MOUNT is not set # CONFIG_DEVTMPFS_SAFE is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # # Firmware loader # CONFIG_FW_LOADER=y CONFIG_FW_LOADER_DEBUG=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_FW_LOADER_USER_HELPER is not set # CONFIG_FW_LOADER_COMPRESS is not set CONFIG_FW_CACHE=y # CONFIG_FW_UPLOAD is not set # end of Firmware loader CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=m CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set # end of Generic Driver Options # # Bus devices # # CONFIG_MOXTET is not set # CONFIG_MHI_BUS is not set # CONFIG_MHI_BUS_EP is not set # end of Bus devices CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # # Firmware Drivers # # # ARM System Control and Management Interface Protocol # # end of ARM System Control and Management Interface Protocol # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_FW_CFG_SYSFS is not set # CONFIG_GOOGLE_FIRMWARE is not set # # Tegra firmware driver # # end of Tegra firmware driver # end of Firmware Drivers # CONFIG_GNSS is not set # CONFIG_MTD is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_KOBJ=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=m CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_FD_RAWCMD is not set CONFIG_MAC_FLOPPY=y CONFIG_CDROM=m CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m CONFIG_ZRAM=m CONFIG_ZRAM_DEF_COMP_LZORLE=y # CONFIG_ZRAM_DEF_COMP_LZ4 is not set # CONFIG_ZRAM_DEF_COMP_LZO is not set # CONFIG_ZRAM_DEF_COMP_LZ4HC is not set CONFIG_ZRAM_DEF_COMP="lzo-rle" # CONFIG_ZRAM_WRITEBACK is not set # CONFIG_ZRAM_MEMORY_TRACKING is not set # CONFIG_ZRAM_MULTI_COMP is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_DRBD=m # CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=m CONFIG_BLK_DEV_RBD=m # CONFIG_BLK_DEV_UBLK is not set # # NVME Support # CONFIG_NVME_CORE=m CONFIG_BLK_DEV_NVME=m # CONFIG_NVME_MULTIPATH is not set # CONFIG_NVME_VERBOSE_ERRORS is not set # CONFIG_NVME_HWMON is not set # CONFIG_NVME_RDMA is not set # CONFIG_NVME_FC is not set # CONFIG_NVME_TCP is not set # CONFIG_NVME_AUTH is not set # CONFIG_NVME_TARGET is not set # end of NVME Support # # Misc devices # CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m # CONFIG_DUMMY_IRQ is not set CONFIG_PHANTOM=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m CONFIG_ENCLOSURE_SERVICES=m CONFIG_HP_ILO=m CONFIG_APDS9802ALS=m CONFIG_ISL29003=m CONFIG_ISL29020=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_BH1770=m CONFIG_SENSORS_APDS990X=m CONFIG_HMC6352=m CONFIG_DS1682=m # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_DW_XDATA_PCIE is not set # CONFIG_PCI_ENDPOINT_TEST is not set # CONFIG_XILINX_SDFEC is not set # CONFIG_OPEN_DICE is not set # CONFIG_VCPU_STALL_DETECTOR is not set CONFIG_C2PORT=m # # EEPROM support # CONFIG_EEPROM_AT24=m CONFIG_EEPROM_AT25=m CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set # CONFIG_EEPROM_EE1004 is not set # end of EEPROM support CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # end of Texas Instruments shared transport line discipline # CONFIG_SENSORS_LIS3_SPI is not set CONFIG_SENSORS_LIS3_I2C=m CONFIG_ALTERA_STAPL=m # CONFIG_ECHO is not set # CONFIG_BCM_VK is not set # CONFIG_MISC_ALCOR_PCI is not set # CONFIG_MISC_RTSX_PCI is not set # CONFIG_MISC_RTSX_USB is not set # CONFIG_UACCE is not set # CONFIG_PVPANIC is not set # CONFIG_GP_PCI1XXXX is not set # end of Misc devices # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=m CONFIG_SCSI_COMMON=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_NETLINK=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=m CONFIG_BLK_DEV_BSG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=m # end of SCSI Transports CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m CONFIG_SCSI_BNX2X_FCOE=m CONFIG_BE2ISCSI=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_HPSA=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_3W_SAS=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC94XX=m # CONFIG_AIC94XX_DEBUG is not set CONFIG_SCSI_MVSAS=m # CONFIG_SCSI_MVSAS_DEBUG is not set # CONFIG_SCSI_MVSAS_TASKLET is not set CONFIG_SCSI_MVUMI=m CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_ARCMSR=m CONFIG_SCSI_ESAS2R=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=m CONFIG_SCSI_MPT3SAS=m CONFIG_SCSI_MPT2SAS_MAX_SGE=128 CONFIG_SCSI_MPT3SAS_MAX_SGE=128 CONFIG_SCSI_MPT2SAS=m # CONFIG_SCSI_MPI3MR is not set # CONFIG_SCSI_SMARTPQI is not set CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_FLASHPOINT is not set # CONFIG_SCSI_MYRB is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set CONFIG_SCSI_DMX3191D=m # CONFIG_SCSI_FDOMAIN_PCI is not set CONFIG_SCSI_IPS=m # CONFIG_SCSI_INITIO is not set CONFIG_SCSI_INIA100=m # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_STEX=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA_FC=m CONFIG_TCM_QLA2XXX=m # CONFIG_TCM_QLA2XXX_DEBUG is not set CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_LPFC_DEBUG_FS is not set # CONFIG_SCSI_EFCT is not set CONFIG_SCSI_DC395x=m # CONFIG_SCSI_AM53C974 is not set CONFIG_SCSI_NSP32=m # CONFIG_SCSI_WD719X is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SCSI_MESH=m CONFIG_SCSI_MESH_SYNC_RATE=5 CONFIG_SCSI_MESH_RESET_DELAY_MS=4000 CONFIG_SCSI_MAC53C94=m CONFIG_SCSI_PMCRAID=m CONFIG_SCSI_PM8001=m CONFIG_SCSI_BFA_FC=m CONFIG_SCSI_VIRTIO=m CONFIG_SCSI_CHELSIO_FCOE=m CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_AHA152X=m # CONFIG_PCMCIA_FDOMAIN is not set CONFIG_PCMCIA_NINJA_SCSI=m CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m # CONFIG_SCSI_DH is not set # end of SCSI device support CONFIG_ATA=y CONFIG_SATA_HOST=y CONFIG_PATA_TIMINGS=y CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_FORCE=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=m CONFIG_SATA_MOBILE_LPM_POLICY=0 # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_AHCI_DWC is not set # CONFIG_AHCI_CEVA is not set # CONFIG_SATA_INIC162X is not set CONFIG_SATA_ACARD_AHCI=m CONFIG_SATA_SIL24=m CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_SX4=m CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=m # CONFIG_SATA_DWC is not set CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SIL=m CONFIG_SATA_SIS=m CONFIG_SATA_SVW=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set CONFIG_PATA_ARTOP=m # CONFIG_PATA_ATIIXP is not set CONFIG_PATA_ATP867X=m CONFIG_PATA_CMD64X=m # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=m # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set CONFIG_PATA_IT8213=m CONFIG_PATA_IT821X=m CONFIG_PATA_JMICRON=m CONFIG_PATA_MACIO=y CONFIG_PATA_MARVELL=m CONFIG_PATA_MPC52xx=m CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=m CONFIG_PATA_NS87415=m # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set CONFIG_PATA_PDC2027X=m CONFIG_PATA_PDC_OLD=m # CONFIG_PATA_RADISYS is not set CONFIG_PATA_RDC=m CONFIG_PATA_SCH=m # CONFIG_PATA_SERVERWORKS is not set CONFIG_PATA_SIL680=m CONFIG_PATA_SIS=m CONFIG_PATA_TOSHIBA=m # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_VIA=m CONFIG_PATA_WINBOND=m # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set CONFIG_PATA_NS87410=m # CONFIG_PATA_OPTI is not set CONFIG_PATA_PCMCIA=m # CONFIG_PATA_OF_PLATFORM is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_PARPORT is not set # # Generic fallback / legacy drivers # CONFIG_ATA_GENERIC=m # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m # CONFIG_MD_CLUSTER is not set CONFIG_BCACHE=m # CONFIG_BCACHE_DEBUG is not set # CONFIG_BCACHE_CLOSURES_DEBUG is not set # CONFIG_BCACHE_ASYNC_REGISTRATION is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m # CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m # CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m # CONFIG_DM_WRITECACHE is not set CONFIG_DM_ERA=m # CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m # CONFIG_DM_MULTIPATH_HST is not set # CONFIG_DM_MULTIPATH_IOA is not set CONFIG_DM_DELAY=m # CONFIG_DM_DUST is not set CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m # CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m # CONFIG_DM_LOG_WRITES is not set # CONFIG_DM_INTEGRITY is not set # CONFIG_DM_AUDIT is not set CONFIG_TARGET_CORE=m CONFIG_TCM_IBLOCK=m CONFIG_TCM_FILEIO=m CONFIG_TCM_PSCSI=m # CONFIG_TCM_USER2 is not set CONFIG_LOOPBACK_TARGET=m CONFIG_TCM_FC=m CONFIG_ISCSI_TARGET=m # CONFIG_ISCSI_TARGET_CXGB4 is not set CONFIG_SBP_TARGET=m # CONFIG_REMOTE_TARGET is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m # CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m CONFIG_FIREWIRE_NET=m CONFIG_FIREWIRE_NOSY=m # end of IEEE 1394 (FireWire) support CONFIG_MACINTOSH_DRIVERS=y CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y CONFIG_ADB_PMU_EVENT=y CONFIG_ADB_PMU_LED=y # CONFIG_ADB_PMU_LED_DISK is not set # CONFIG_PMAC_APM_EMU is not set CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y # CONFIG_PMAC_BACKLIGHT_LEGACY is not set CONFIG_ADB_MACIO=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_THERM_WINDTUNNEL=m CONFIG_THERM_ADT746X=m CONFIG_WINDFARM=m CONFIG_ANSLCD=m CONFIG_PMAC_RACKMETER=m CONFIG_SENSORS_AMS=m CONFIG_SENSORS_AMS_PMU=y CONFIG_SENSORS_AMS_I2C=y CONFIG_NETDEVICES=y CONFIG_MII=m CONFIG_NET_CORE=y CONFIG_BONDING=m CONFIG_DUMMY=m # CONFIG_WIREGUARD is not set CONFIG_EQUALIZER=m CONFIG_NET_FC=y CONFIG_IFB=m CONFIG_NET_TEAM=m CONFIG_NET_TEAM_MODE_BROADCAST=m CONFIG_NET_TEAM_MODE_ROUNDROBIN=m CONFIG_NET_TEAM_MODE_RANDOM=m CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m # CONFIG_IPVLAN is not set CONFIG_VXLAN=m # CONFIG_GENEVE is not set # CONFIG_BAREUDP is not set # CONFIG_GTP is not set # CONFIG_AMT is not set # CONFIG_MACSEC is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NET_POLL_CONTROLLER=y CONFIG_TUN=m CONFIG_TAP=m # CONFIG_TUN_VNET_CROSS_LE is not set CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_NLMON=m CONFIG_SUNGEM_PHY=m CONFIG_ARCNET=m CONFIG_ARCNET_1201=m CONFIG_ARCNET_1051=m CONFIG_ARCNET_RAW=m CONFIG_ARCNET_CAP=m # CONFIG_ARCNET_COM90xx is not set CONFIG_ARCNET_COM90xxIO=m # CONFIG_ARCNET_RIM_I is not set CONFIG_ARCNET_COM20020=m CONFIG_ARCNET_COM20020_PCI=m CONFIG_ARCNET_COM20020_CS=m CONFIG_ATM_DRIVERS=y CONFIG_ATM_DUMMY=m CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m # CONFIG_ATM_ENI_DEBUG is not set # CONFIG_ATM_ENI_TUNE_BURST is not set CONFIG_ATM_NICSTAR=m CONFIG_ATM_NICSTAR_USE_SUNI=y CONFIG_ATM_NICSTAR_USE_IDT77105=y CONFIG_ATM_IDT77252=m # CONFIG_ATM_IDT77252_DEBUG is not set # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y CONFIG_ATM_IA=m # CONFIG_ATM_IA_DEBUG is not set CONFIG_ATM_FORE200E=m CONFIG_ATM_FORE200E_USE_TASKLET=y CONFIG_ATM_FORE200E_TX_RETRY=16 CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set CONFIG_ATM_SOLOS=m CONFIG_ETHERNET=y CONFIG_MDIO=m CONFIG_NET_VENDOR_3COM=y CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_3C589=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_NET_VENDOR_ADAPTEC=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_NET_VENDOR_AGERE=y # CONFIG_ET131X is not set CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_SLICOSS is not set CONFIG_NET_VENDOR_ALTEON=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_ALTERA_TSE is not set CONFIG_NET_VENDOR_AMAZON=y CONFIG_NET_VENDOR_AMD=y # CONFIG_AMD8111_ETH is not set CONFIG_PCNET32=m CONFIG_PCMCIA_NMCLAN=m CONFIG_NET_VENDOR_APPLE=y CONFIG_MACE=m # CONFIG_MACE_AAUI_PORT is not set CONFIG_BMAC=m CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_AQTION is not set # CONFIG_NET_VENDOR_ARC is not set CONFIG_NET_VENDOR_ASIX=y # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_ALX=m CONFIG_NET_VENDOR_BROADCOM=y CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y # CONFIG_BCMGENET is not set CONFIG_BNX2=m CONFIG_CNIC=m CONFIG_TIGON3=m CONFIG_TIGON3_HWMON=y CONFIG_BNX2X=m CONFIG_BNX2X_SRIOV=y # CONFIG_SYSTEMPORT is not set # CONFIG_BNXT is not set CONFIG_NET_VENDOR_CADENCE=y # CONFIG_MACB is not set CONFIG_NET_VENDOR_CAVIUM=y CONFIG_NET_VENDOR_CHELSIO=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3=m CONFIG_CHELSIO_T4=m # CONFIG_CHELSIO_T4_DCB is not set CONFIG_CHELSIO_T4VF=m CONFIG_CHELSIO_LIB=m CONFIG_CHELSIO_INLINE_CRYPTO=y CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m CONFIG_NET_VENDOR_CORTINA=y # CONFIG_GEMINI_ETHERNET is not set CONFIG_NET_VENDOR_DAVICOM=y # CONFIG_DM9051 is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_DEC=y CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_DE2104X_DSL=0 CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_ULI526X=m CONFIG_PCMCIA_XIRCOM=m CONFIG_NET_VENDOR_DLINK=y CONFIG_DL2K=m CONFIG_SUNDANCE=m CONFIG_SUNDANCE_MMIO=y CONFIG_NET_VENDOR_EMULEX=y CONFIG_BE2NET=m CONFIG_BE2NET_HWMON=y CONFIG_BE2NET_BE2=y CONFIG_BE2NET_BE3=y CONFIG_BE2NET_LANCER=y CONFIG_BE2NET_SKYHAWK=y CONFIG_NET_VENDOR_ENGLEDER=y # CONFIG_TSNEP is not set CONFIG_NET_VENDOR_EZCHIP=y # CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set CONFIG_NET_VENDOR_FREESCALE=y CONFIG_FEC_MPC52xx=m CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_FSL_PQ_MDIO is not set # CONFIG_FSL_XGMAC_MDIO is not set # CONFIG_GIANFAR is not set # CONFIG_FSL_ENETC is not set # CONFIG_FSL_ENETC_VF is not set # CONFIG_FSL_ENETC_IERB is not set # CONFIG_FSL_ENETC_MDIO is not set CONFIG_NET_VENDOR_FUJITSU=y CONFIG_PCMCIA_FMVJ18X=m CONFIG_NET_VENDOR_FUNGIBLE=y # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y CONFIG_NET_VENDOR_HUAWEI=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y CONFIG_E100=m CONFIG_E1000=m CONFIG_E1000E=m CONFIG_IGB=m CONFIG_IGB_HWMON=y CONFIG_IGBVF=m CONFIG_IXGBE=m CONFIG_IXGBE_HWMON=y CONFIG_IXGBE_DCB=y CONFIG_IXGBEVF=m CONFIG_I40E=m CONFIG_I40E_DCB=y CONFIG_IAVF=m CONFIG_I40EVF=m # CONFIG_ICE is not set # CONFIG_FM10K is not set # CONFIG_IGC is not set CONFIG_JME=m CONFIG_NET_VENDOR_ADI=y CONFIG_NET_VENDOR_LITEX=y # CONFIG_LITEX_LITEETH is not set CONFIG_NET_VENDOR_MARVELL=y CONFIG_MV643XX_ETH=m CONFIG_MVMDIO=m CONFIG_SKGE=m # CONFIG_SKGE_DEBUG is not set CONFIG_SKGE_GENESIS=y CONFIG_SKY2=m # CONFIG_SKY2_DEBUG is not set CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y CONFIG_MLX4_CORE=m CONFIG_MLX4_DEBUG=y CONFIG_MLX4_CORE_GEN2=y CONFIG_MLX5_CORE=m # CONFIG_MLX5_FPGA is not set # CONFIG_MLX5_CORE_EN is not set # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set CONFIG_KSZ884X_PCI=m CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set # CONFIG_ENCX24J600 is not set # CONFIG_LAN743X is not set # CONFIG_VCAP is not set CONFIG_NET_VENDOR_MICROSEMI=y CONFIG_NET_VENDOR_MICROSOFT=y CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m CONFIG_FEALNX=m CONFIG_NET_VENDOR_NI=y # CONFIG_NI_XGE_MANAGEMENT_ENET is not set CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NATSEMI=m CONFIG_NS83820=m CONFIG_NET_VENDOR_NETERION=y CONFIG_S2IO=m CONFIG_NET_VENDOR_NETRONOME=y # CONFIG_NFP is not set CONFIG_NET_VENDOR_8390=y CONFIG_PCMCIA_AXNET=m CONFIG_NE2K_PCI=m CONFIG_PCMCIA_PCNET=m CONFIG_NET_VENDOR_NVIDIA=y # CONFIG_FORCEDETH is not set CONFIG_NET_VENDOR_OKI=y # CONFIG_ETHOC is not set CONFIG_NET_VENDOR_PACKET_ENGINES=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_NET_VENDOR_PENSANDO=y CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_HWMON=y CONFIG_NETXEN_NIC=m # CONFIG_QED is not set CONFIG_NET_VENDOR_BROCADE=y CONFIG_BNA=m CONFIG_NET_VENDOR_QUALCOMM=y # CONFIG_QCA7000_SPI is not set # CONFIG_QCOM_EMAC is not set # CONFIG_RMNET is not set CONFIG_NET_VENDOR_RDC=y CONFIG_R6040=m CONFIG_NET_VENDOR_REALTEK=y CONFIG_8139CP=m CONFIG_8139TOO=m CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_R8169=m CONFIG_NET_VENDOR_RENESAS=y CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SAMSUNG=y # CONFIG_SXGBE_ETH is not set # CONFIG_NET_VENDOR_SEEQ is not set CONFIG_NET_VENDOR_SILAN=y CONFIG_SC92031=m CONFIG_NET_VENDOR_SIS=y CONFIG_SIS900=m CONFIG_SIS190=m CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_SFC=m CONFIG_SFC_MCDI_MON=y CONFIG_SFC_SRIOV=y CONFIG_SFC_MCDI_LOGGING=y # CONFIG_SFC_FALCON is not set # CONFIG_SFC_SIENA is not set CONFIG_NET_VENDOR_SMSC=y CONFIG_PCMCIA_SMC91C92=m CONFIG_EPIC100=m # CONFIG_SMSC911X is not set CONFIG_SMSC9420=m CONFIG_NET_VENDOR_SOCIONEXT=y CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set CONFIG_NET_VENDOR_SUN=y CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_CASSINI=m CONFIG_NIU=m CONFIG_NET_VENDOR_SYNOPSYS=y # CONFIG_DWC_XLGMAC is not set CONFIG_NET_VENDOR_TEHUTI=y CONFIG_TEHUTI=m CONFIG_NET_VENDOR_TI=y # CONFIG_TI_CPSW_PHY_SEL is not set CONFIG_TLAN=m CONFIG_NET_VENDOR_VERTEXCOM=y # CONFIG_MSE102X is not set CONFIG_NET_VENDOR_VIA=y CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_VELOCITY=m CONFIG_NET_VENDOR_WANGXUN=y # CONFIG_NGBE is not set # CONFIG_TXGBE is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_NET_VENDOR_XILINX=y # CONFIG_XILINX_EMACLITE is not set # CONFIG_XILINX_AXI_EMAC is not set # CONFIG_XILINX_LL_TEMAC is not set CONFIG_NET_VENDOR_XIRCOM=y CONFIG_PCMCIA_XIRC2PS=m CONFIG_FDDI=y CONFIG_DEFXX=m CONFIG_SKFP=m CONFIG_HIPPI=y # CONFIG_ROADRUNNER is not set CONFIG_PHYLINK=m CONFIG_PHYLIB=m CONFIG_SWPHY=y # CONFIG_LED_TRIGGER_PHY is not set CONFIG_PHYLIB_LEDS=y CONFIG_FIXED_PHY=m # CONFIG_SFP is not set # # MII PHY device drivers # CONFIG_AMD_PHY=m # CONFIG_ADIN_PHY is not set # CONFIG_ADIN1100_PHY is not set # CONFIG_AQUANTIA_PHY is not set CONFIG_AX88796B_PHY=m CONFIG_BROADCOM_PHY=m # CONFIG_BCM54140_PHY is not set # CONFIG_BCM7XXX_PHY is not set # CONFIG_BCM84881_PHY is not set CONFIG_BCM87XX_PHY=m CONFIG_BCM_NET_PHYLIB=m CONFIG_CICADA_PHY=m # CONFIG_CORTINA_PHY is not set CONFIG_DAVICOM_PHY=m CONFIG_ICPLUS_PHY=m CONFIG_LXT_PHY=m # CONFIG_INTEL_XWAY_PHY is not set CONFIG_LSI_ET1011C_PHY=m CONFIG_MARVELL_PHY=m # CONFIG_MARVELL_10G_PHY is not set # CONFIG_MARVELL_88X2222_PHY is not set # CONFIG_MAXLINEAR_GPHY is not set # CONFIG_MEDIATEK_GE_PHY is not set CONFIG_MICREL_PHY=m # CONFIG_MICROCHIP_T1S_PHY is not set # CONFIG_MICROCHIP_PHY is not set # CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_MOTORCOMM_PHY is not set CONFIG_NATIONAL_PHY=m # CONFIG_NXP_CBTX_PHY is not set # CONFIG_NXP_C45_TJA11XX_PHY is not set # CONFIG_NXP_TJA11XX_PHY is not set # CONFIG_NCN26000_PHY is not set CONFIG_QSEMI_PHY=m CONFIG_REALTEK_PHY=m # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set CONFIG_SMSC_PHY=m CONFIG_STE10XP=m # CONFIG_TERANETICS_PHY is not set # CONFIG_DP83822_PHY is not set # CONFIG_DP83TC811_PHY is not set # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set # CONFIG_DP83869_PHY is not set # CONFIG_DP83TD510_PHY is not set CONFIG_VITESSE_PHY=m # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_MICREL_KS8995MA is not set # CONFIG_PSE_CONTROLLER is not set CONFIG_CAN_DEV=m CONFIG_CAN_VCAN=m # CONFIG_CAN_VXCAN is not set CONFIG_CAN_NETLINK=y CONFIG_CAN_CALC_BITTIMING=y # CONFIG_CAN_CAN327 is not set # CONFIG_CAN_FLEXCAN is not set # CONFIG_CAN_GRCAN is not set # CONFIG_CAN_KVASER_PCIEFD is not set CONFIG_CAN_SLCAN=m # CONFIG_CAN_C_CAN is not set # CONFIG_CAN_CC770 is not set # CONFIG_CAN_CTUCANFD_PCI is not set # CONFIG_CAN_CTUCANFD_PLATFORM is not set # CONFIG_CAN_IFI_CANFD is not set # CONFIG_CAN_M_CAN is not set # CONFIG_CAN_MSCAN is not set # CONFIG_CAN_PEAK_PCIEFD is not set CONFIG_CAN_SJA1000=m CONFIG_CAN_EMS_PCI=m CONFIG_CAN_EMS_PCMCIA=m # CONFIG_CAN_F81601 is not set CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y CONFIG_CAN_PEAK_PCMCIA=m CONFIG_CAN_PLX_PCI=m CONFIG_CAN_SJA1000_ISA=m # CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_SOFTING=m CONFIG_CAN_SOFTING_CS=m # # CAN SPI interfaces # # CONFIG_CAN_HI311X is not set # CONFIG_CAN_MCP251X is not set # CONFIG_CAN_MCP251XFD is not set # end of CAN SPI interfaces # # CAN USB interfaces # CONFIG_CAN_8DEV_USB=m CONFIG_CAN_EMS_USB=m # CONFIG_CAN_ESD_USB is not set # CONFIG_CAN_ETAS_ES58X is not set # CONFIG_CAN_F81604 is not set CONFIG_CAN_GS_USB=m CONFIG_CAN_KVASER_USB=m # CONFIG_CAN_MCBA_USB is not set CONFIG_CAN_PEAK_USB=m # CONFIG_CAN_UCAN is not set # end of CAN USB interfaces # CONFIG_CAN_DEBUG_DEVICES is not set CONFIG_MDIO_DEVICE=m CONFIG_MDIO_BUS=m CONFIG_FWNODE_MDIO=m CONFIG_OF_MDIO=m CONFIG_MDIO_DEVRES=m # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BCM_UNIMAC is not set # CONFIG_MDIO_HISI_FEMAC is not set # CONFIG_MDIO_MVUSB is not set # CONFIG_MDIO_IPQ4019 is not set # # MDIO Multiplexers # # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # # PCS device drivers # # end of PCS device drivers # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPP_MULTILINK=y CONFIG_PPPOATM=m CONFIG_PPPOE=m # CONFIG_PPPOE_HASH_BITS_1 is not set # CONFIG_PPPOE_HASH_BITS_2 is not set CONFIG_PPPOE_HASH_BITS_4=y # CONFIG_PPPOE_HASH_BITS_8 is not set CONFIG_PPPOE_HASH_BITS=4 CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLHC=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y # # Host-side USB support is needed for USB Network Adapter support # CONFIG_USB_NET_DRIVERS=m CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=m # CONFIG_USB_LAN78XX is not set CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_AX88179_178A=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_CDC_EEM=m CONFIG_USB_NET_CDC_NCM=m CONFIG_USB_NET_HUAWEI_CDC_NCM=m CONFIG_USB_NET_CDC_MBIM=m CONFIG_USB_NET_DM9601=m CONFIG_USB_NET_SR9700=m CONFIG_USB_NET_SR9800=m CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET_ENABLE=m CONFIG_USB_NET_CDC_SUBSET=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=m CONFIG_USB_NET_CX82310_ETH=m CONFIG_USB_NET_KALMIA=m CONFIG_USB_NET_QMI_WWAN=m CONFIG_USB_HSO=m CONFIG_USB_NET_INT51X1=m CONFIG_USB_CDC_PHONET=m CONFIG_USB_IPHETH=m CONFIG_USB_SIERRA_NET=m CONFIG_USB_VL600=m # CONFIG_USB_NET_CH9200 is not set # CONFIG_USB_NET_AQC111 is not set CONFIG_USB_RTL8153_ECM=m CONFIG_WLAN=y CONFIG_WLAN_VENDOR_ADMTEK=y CONFIG_ADM8211=m CONFIG_ATH_COMMON=m CONFIG_WLAN_VENDOR_ATH=y # CONFIG_ATH_DEBUG is not set CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set # CONFIG_ATH5K_TRACER is not set CONFIG_ATH5K_PCI=y CONFIG_ATH9K_HW=m CONFIG_ATH9K_COMMON=m CONFIG_ATH9K_BTCOEX_SUPPORT=y CONFIG_ATH9K=m CONFIG_ATH9K_PCI=y # CONFIG_ATH9K_AHB is not set # CONFIG_ATH9K_DEBUGFS is not set # CONFIG_ATH9K_DYNACK is not set # CONFIG_ATH9K_WOW is not set CONFIG_ATH9K_RFKILL=y # CONFIG_ATH9K_CHANNEL_CONTEXT is not set CONFIG_ATH9K_PCOEM=y # CONFIG_ATH9K_PCI_NO_EEPROM is not set CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set # CONFIG_ATH9K_HWRNG is not set CONFIG_CARL9170=m CONFIG_CARL9170_LEDS=y CONFIG_CARL9170_WPC=y # CONFIG_CARL9170_HWRNG is not set CONFIG_ATH6KL=m CONFIG_ATH6KL_SDIO=m CONFIG_ATH6KL_USB=m # CONFIG_ATH6KL_DEBUG is not set # CONFIG_ATH6KL_TRACING is not set CONFIG_AR5523=m CONFIG_WIL6210=m CONFIG_WIL6210_ISR_COR=y CONFIG_WIL6210_TRACING=y CONFIG_WIL6210_DEBUGFS=y CONFIG_ATH10K=m CONFIG_ATH10K_CE=y CONFIG_ATH10K_PCI=m # CONFIG_ATH10K_SDIO is not set # CONFIG_ATH10K_USB is not set # CONFIG_ATH10K_DEBUG is not set # CONFIG_ATH10K_DEBUGFS is not set # CONFIG_ATH10K_TRACING is not set # CONFIG_WCN36XX is not set # CONFIG_ATH11K is not set # CONFIG_ATH12K is not set CONFIG_WLAN_VENDOR_ATMEL=y CONFIG_ATMEL=m # CONFIG_PCI_ATMEL is not set CONFIG_PCMCIA_ATMEL=m CONFIG_AT76C50X_USB=m CONFIG_WLAN_VENDOR_BROADCOM=y CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_SSB=y CONFIG_B43_BUSES_BCMA_AND_SSB=y # CONFIG_B43_BUSES_BCMA is not set # CONFIG_B43_BUSES_SSB is not set CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y CONFIG_B43_SDIO=y CONFIG_B43_BCMA_PIO=y CONFIG_B43_PIO=y CONFIG_B43_PHY_G=y CONFIG_B43_PHY_N=y CONFIG_B43_PHY_LP=y CONFIG_B43_PHY_HT=y CONFIG_B43_LEDS=y CONFIG_B43_HWRNG=y # CONFIG_B43_DEBUG is not set CONFIG_B43LEGACY=m CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y CONFIG_B43LEGACY_HWRNG=y CONFIG_B43LEGACY_DEBUG=y CONFIG_B43LEGACY_DMA=y CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_DMA_MODE is not set # CONFIG_B43LEGACY_PIO_MODE is not set CONFIG_BRCMUTIL=m CONFIG_BRCMSMAC=m # CONFIG_BRCMFMAC is not set # CONFIG_BRCM_TRACING is not set # CONFIG_BRCMDBG is not set CONFIG_WLAN_VENDOR_CISCO=y CONFIG_AIRO=m CONFIG_AIRO_CS=m CONFIG_WLAN_VENDOR_INTEL=y # CONFIG_IPW2100 is not set CONFIG_IPW2200=m CONFIG_IPW2200_MONITOR=y CONFIG_IPW2200_RADIOTAP=y CONFIG_IPW2200_PROMISCUOUS=y CONFIG_IPW2200_QOS=y # CONFIG_IPW2200_DEBUG is not set CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set CONFIG_IWLEGACY=m CONFIG_IWL4965=m CONFIG_IWL3945=m # # iwl3945 / iwl4965 Debugging Options # # CONFIG_IWLEGACY_DEBUG is not set # end of iwl3945 / iwl4965 Debugging Options CONFIG_IWLWIFI=m CONFIG_IWLWIFI_LEDS=y CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y # # Debugging Options # # CONFIG_IWLWIFI_DEBUG is not set # CONFIG_IWLWIFI_DEVICE_TRACING is not set # end of Debugging Options CONFIG_WLAN_VENDOR_INTERSIL=y CONFIG_HOSTAP=m CONFIG_HOSTAP_FIRMWARE=y # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set CONFIG_HOSTAP_PLX=m CONFIG_HOSTAP_PCI=m CONFIG_HOSTAP_CS=m CONFIG_HERMES=m # CONFIG_HERMES_PRISM is not set CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_APPLE_AIRPORT=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m CONFIG_ORINOCO_USB=m CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m # CONFIG_P54_SPI is not set CONFIG_P54_LEDS=y CONFIG_WLAN_VENDOR_MARVELL=y CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_CS=m CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_MESH=y CONFIG_LIBERTAS_THINFIRM=m # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set CONFIG_LIBERTAS_THINFIRM_USB=m CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_PCIE=m # CONFIG_MWIFIEX_USB is not set CONFIG_MWL8K=m CONFIG_WLAN_VENDOR_MEDIATEK=y # CONFIG_MT7601U is not set # CONFIG_MT76x0U is not set # CONFIG_MT76x0E is not set # CONFIG_MT76x2E is not set # CONFIG_MT76x2U is not set # CONFIG_MT7603E is not set # CONFIG_MT7615E is not set # CONFIG_MT7663U is not set # CONFIG_MT7663S is not set # CONFIG_MT7915E is not set # CONFIG_MT7921E is not set # CONFIG_MT7921S is not set # CONFIG_MT7921U is not set # CONFIG_MT7996E is not set CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set CONFIG_WLAN_VENDOR_PURELIFI=y # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m CONFIG_RT2800PCI=m CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y CONFIG_RT2800PCI_RT3290=y CONFIG_RT2500USB=m CONFIG_RT73USB=m CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y CONFIG_RT2800USB_RT3573=y CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_RT55XX=y # CONFIG_RT2800USB_UNKNOWN is not set CONFIG_RT2800_LIB=m CONFIG_RT2800_LIB_MMIO=m CONFIG_RT2X00_LIB_MMIO=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set CONFIG_WLAN_VENDOR_REALTEK=y CONFIG_RTL8180=m CONFIG_RTL8187=m CONFIG_RTL8187_LEDS=y CONFIG_RTL_CARDS=m CONFIG_RTL8192CE=m CONFIG_RTL8192SE=m CONFIG_RTL8192DE=m CONFIG_RTL8723AE=m CONFIG_RTL8723BE=m CONFIG_RTL8188EE=m # CONFIG_RTL8192EE is not set # CONFIG_RTL8821AE is not set CONFIG_RTL8192CU=m CONFIG_RTLWIFI=m CONFIG_RTLWIFI_PCI=m CONFIG_RTLWIFI_USB=m # CONFIG_RTLWIFI_DEBUG is not set CONFIG_RTL8192C_COMMON=m CONFIG_RTL8723_COMMON=m CONFIG_RTLBTCOEXIST=m # CONFIG_RTL8XXXU is not set # CONFIG_RTW88 is not set # CONFIG_RTW89 is not set CONFIG_WLAN_VENDOR_RSI=y CONFIG_RSI_91X=m CONFIG_RSI_DEBUGFS=y # CONFIG_RSI_SDIO is not set CONFIG_RSI_USB=m CONFIG_RSI_COEX=y CONFIG_WLAN_VENDOR_SILABS=y # CONFIG_WFX is not set CONFIG_WLAN_VENDOR_ST=y # CONFIG_CW1200 is not set CONFIG_WLAN_VENDOR_TI=y # CONFIG_WL1251 is not set # CONFIG_WL12XX is not set # CONFIG_WL18XX is not set # CONFIG_WLCORE is not set CONFIG_WLAN_VENDOR_ZYDAS=y CONFIG_USB_ZD1201=m CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_WLAN_VENDOR_QUANTENNA=y # CONFIG_QTNFMAC_PCIE is not set CONFIG_PCMCIA_RAYCS=m CONFIG_PCMCIA_WL3501=m CONFIG_USB_NET_RNDIS_WLAN=m CONFIG_MAC80211_HWSIM=m # CONFIG_VIRT_WIFI is not set CONFIG_WAN=y CONFIG_HDLC=m CONFIG_HDLC_RAW=m CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m # CONFIG_HDLC_X25 is not set CONFIG_PCI200SYN=m CONFIG_WANXL=m # CONFIG_PC300TOO is not set CONFIG_FARSYNC=m CONFIG_IEEE802154_DRIVERS=m # # Wireless WAN # # CONFIG_WWAN is not set # end of Wireless WAN CONFIG_VMXNET3=m # CONFIG_NETDEVSIM is not set CONFIG_NET_FAILOVER=m CONFIG_ISDN=y CONFIG_ISDN_CAPI=y CONFIG_CAPI_TRACE=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m # # mISDN hardware drivers # CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCUSB=m CONFIG_MISDN_AVMFRITZ=m CONFIG_MISDN_SPEEDFAX=m CONFIG_MISDN_INFINEON=m CONFIG_MISDN_W6692=m # CONFIG_MISDN_NETJET is not set CONFIG_MISDN_IPAC=m CONFIG_MISDN_ISAR=m # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_LEDS=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m CONFIG_INPUT_VIVALDIFMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADC is not set CONFIG_KEYBOARD_ADP5588=m # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=m # CONFIG_KEYBOARD_QT1050 is not set # CONFIG_KEYBOARD_QT1070 is not set CONFIG_KEYBOARD_QT2160=m # CONFIG_KEYBOARD_DLINK_DIR685 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set CONFIG_KEYBOARD_LM8323=m # CONFIG_KEYBOARD_LM8333 is not set CONFIG_KEYBOARD_MAX7359=m # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_KEYBOARD_OPENCORES=m # CONFIG_KEYBOARD_SAMSUNG is not set CONFIG_KEYBOARD_STOWAWAY=m # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_OMAP4 is not set # CONFIG_KEYBOARD_TM2_TOUCHKEY is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_CAP11XX is not set # CONFIG_KEYBOARD_BCM is not set # CONFIG_KEYBOARD_CYPRESS_SF is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_BYD=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y CONFIG_MOUSE_PS2_SENTELIC=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_PS2_SMBUS=y # CONFIG_MOUSE_SERIAL is not set CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_ELAN_I2C is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_MOUSE_SYNAPTICS_USB=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m # CONFIG_JOYSTICK_ADC is not set CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m CONFIG_JOYSTICK_GRIP=m CONFIG_JOYSTICK_GRIP_MP=m CONFIG_JOYSTICK_GUILLEMOT=m CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=m CONFIG_JOYSTICK_IFORCE_232=m CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m CONFIG_JOYSTICK_TWIDJOY=m CONFIG_JOYSTICK_ZHENHUA=m CONFIG_JOYSTICK_DB9=m CONFIG_JOYSTICK_GAMECON=m CONFIG_JOYSTICK_TURBOGRAFX=m # CONFIG_JOYSTICK_AS5011 is not set CONFIG_JOYSTICK_JOYDUMP=m CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y CONFIG_JOYSTICK_WALKERA0701=m # CONFIG_JOYSTICK_PSXPAD_SPI is not set # CONFIG_JOYSTICK_PXRC is not set # CONFIG_JOYSTICK_QWIIC is not set # CONFIG_JOYSTICK_FSIA6B is not set # CONFIG_JOYSTICK_SENSEHAT is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_HANWANG=m CONFIG_TABLET_USB_KBTAB=m # CONFIG_TABLET_USB_PEGASUS is not set # CONFIG_TABLET_SERIAL_WACOM4 is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_AD7877=m CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_ADC is not set # CONFIG_TOUCHSCREEN_AR1021_I2C is not set CONFIG_TOUCHSCREEN_ATMEL_MXT=m # CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_BU21029 is not set # CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set # CONFIG_TOUCHSCREEN_CY8CTMA140 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP5 is not set CONFIG_TOUCHSCREEN_DYNAPRO=m CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_EETI=m # CONFIG_TOUCHSCREEN_EGALAX is not set # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set # CONFIG_TOUCHSCREEN_EXC3000 is not set CONFIG_TOUCHSCREEN_FUJITSU=m # CONFIG_TOUCHSCREEN_GOODIX is not set # CONFIG_TOUCHSCREEN_HIDEEP is not set # CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set # CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_ILITEK is not set # CONFIG_TOUCHSCREEN_S6SY761 is not set CONFIG_TOUCHSCREEN_GUNZE=m # CONFIG_TOUCHSCREEN_EKTF2127 is not set # CONFIG_TOUCHSCREEN_ELAN is not set CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set CONFIG_TOUCHSCREEN_MCS5000=m # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set # CONFIG_TOUCHSCREEN_MSG2638 is not set CONFIG_TOUCHSCREEN_MTOUCH=m # CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set # CONFIG_TOUCHSCREEN_IMAGIS is not set # CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_PENMOUNT=m # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_TOUCHSCREEN_WM9705=y CONFIG_TOUCHSCREEN_WM9712=y CONFIG_TOUCHSCREEN_WM9713=y CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_TOUCHSCREEN_USB_JASTEC=y CONFIG_TOUCHSCREEN_USB_ELO=y CONFIG_TOUCHSCREEN_USB_E2I=y CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y CONFIG_TOUCHSCREEN_USB_NEXIO=y CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2004 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_TOUCHSCREEN_TSC2007_IIO is not set # CONFIG_TOUCHSCREEN_RM_TS is not set # CONFIG_TOUCHSCREEN_SILEAD is not set # CONFIG_TOUCHSCREEN_SIS_I2C is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_STMFTS is not set CONFIG_TOUCHSCREEN_SUR40=m # CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set # CONFIG_TOUCHSCREEN_SX8654 is not set CONFIG_TOUCHSCREEN_TPS6507X=m # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set # CONFIG_TOUCHSCREEN_IQS5XX is not set # CONFIG_TOUCHSCREEN_ZINITIX is not set # CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATMEL_CAPTOUCH is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_GPIO_BEEPER is not set # CONFIG_INPUT_GPIO_DECODER is not set # CONFIG_INPUT_GPIO_VIBRA is not set CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m # CONFIG_INPUT_KXTJ9 is not set CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_DA7280_HAPTICS is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_IQS269A is not set # CONFIG_INPUT_IQS626A is not set # CONFIG_INPUT_IQS7222 is not set # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set CONFIG_RMI4_CORE=m # CONFIG_RMI4_I2C is not set # CONFIG_RMI4_SPI is not set # CONFIG_RMI4_SMB is not set CONFIG_RMI4_F03=y CONFIG_RMI4_F03_SERIO=m CONFIG_RMI4_2D_SENSOR=y CONFIG_RMI4_F11=y CONFIG_RMI4_F12=y CONFIG_RMI4_F30=y # CONFIG_RMI4_F34 is not set # CONFIG_RMI4_F3A is not set # CONFIG_RMI4_F54 is not set # CONFIG_RMI4_F55 is not set # # Hardware I/O ports # CONFIG_SERIO=m CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_SERIO_I8042=m CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=m CONFIG_SERIO_RAW=m # CONFIG_SERIO_XILINX_XPS_PS2 is not set CONFIG_SERIO_ALTERA_PS2=m # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_SERIO_APBPS2 is not set # CONFIG_SERIO_GPIO_PS2 is not set # CONFIG_USERIO is not set CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m # end of Hardware I/O ports # end of Input device support # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_LEGACY_TIOCSTI=y CONFIG_LDISC_AUTOLOAD=y # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_16550A_VARIANTS=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCILIB=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_PCI1XXXX is not set CONFIG_SERIAL_8250_FSL=y # CONFIG_SERIAL_8250_DW is not set # CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_PERICOM=y # CONFIG_SERIAL_OF_PLATFORM is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_PMACZILOG=y # CONFIG_SERIAL_PMACZILOG_TTYS is not set CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_SERIAL_JSM=m # CONFIG_SERIAL_SIFIVE is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_SERIAL_ARC is not set CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_FSL_LINFLEXUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_SPRD is not set # end of Serial drivers CONFIG_SERIAL_MCTRL_GPIO=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_PPC_EPAPR_HV_BYTECHAN is not set CONFIG_IPWIRELESS=m CONFIG_N_GSM=m CONFIG_NOZOMI=m # CONFIG_NULL_TTY is not set CONFIG_HVC_DRIVER=y CONFIG_HVC_RTAS=y # CONFIG_HVC_UDBG is not set # CONFIG_SERIAL_DEV_BUS is not set # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set CONFIG_VIRTIO_CONSOLE=m CONFIG_IPMI_HANDLER=m CONFIG_IPMI_PLAT_DATA=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m # CONFIG_IPMI_SSIF is not set CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=m # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_BA431 is not set CONFIG_HW_RANDOM_VIRTIO=m # CONFIG_HW_RANDOM_CCTRNG is not set # CONFIG_HW_RANDOM_XIPHERA is not set CONFIG_APPLICOM=m CONFIG_DEVMEM=y CONFIG_NVRAM=y CONFIG_DEVPORT=y # CONFIG_TCG_TPM is not set # CONFIG_XILLYBUS is not set # CONFIG_XILLYUSB is not set # end of Character devices # # I2C support # CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX=m # # Multiplexer I2C Chip support # # CONFIG_I2C_ARB_GPIO_CHALLENGE is not set # CONFIG_I2C_MUX_GPIO is not set # CONFIG_I2C_MUX_GPMUX is not set # CONFIG_I2C_MUX_LTC4306 is not set # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_PCA954x is not set # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_MUX_MLXCPLD is not set # end of Multiplexer I2C Chip support CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set CONFIG_I2C_ISCH=m # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_NVIDIA_GPU is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # Mac SMBus host controller drivers # CONFIG_I2C_HYDRA=m CONFIG_I2C_POWERMAC=y # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set # CONFIG_I2C_DESIGNWARE_PLATFORM is not set # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=m CONFIG_I2C_OCORES=m CONFIG_I2C_PCA_PLATFORM=m # CONFIG_I2C_RK3X is not set CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=m # CONFIG_I2C_CP2615 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PCI1XXXX is not set CONFIG_I2C_ROBOTFUZZ_OSIF=m CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m CONFIG_I2C_VIPERBOARD=m # # Other I2C/SMBus bus drivers # # CONFIG_I2C_VIRTIO is not set # end of I2C Hardware Bus support # CONFIG_I2C_STUB is not set # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # end of I2C support # CONFIG_I3C is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # CONFIG_SPI_MEM is not set # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_AXI_SPI_ENGINE is not set CONFIG_SPI_BITBANG=m CONFIG_SPI_BUTTERFLY=m # CONFIG_SPI_CADENCE is not set # CONFIG_SPI_DESIGNWARE is not set # CONFIG_SPI_GPIO is not set CONFIG_SPI_LM70_LLP=m # CONFIG_SPI_MPC52xx is not set CONFIG_SPI_MPC52xx_PSC=m # CONFIG_SPI_FSL_SPI is not set # CONFIG_SPI_MICROCHIP_CORE is not set # CONFIG_SPI_MICROCHIP_CORE_QSPI is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PCI1XXXX is not set # CONFIG_SPI_PXA2XX is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_SIFIVE is not set # CONFIG_SPI_MXIC is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set # CONFIG_SPI_AMD is not set # # SPI Multiplexer support # # CONFIG_SPI_MUX is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set CONFIG_PPS=m # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set CONFIG_PPS_CLIENT_LDISC=m CONFIG_PPS_CLIENT_PARPORT=m # CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=m CONFIG_PTP_1588_CLOCK_OPTIONAL=m # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_IDT82P33 is not set # CONFIG_PTP_1588_CLOCK_IDTCM is not set # end of PTP clock support # CONFIG_PINCTRL is not set CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y CONFIG_GPIOLIB_IRQCHIP=y CONFIG_OF_GPIO_MM_GPIOCHIP=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set CONFIG_GPIO_CDEV=y CONFIG_GPIO_CDEV_V1=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set # CONFIG_GPIO_CADENCE is not set # CONFIG_GPIO_DWAPB is not set # CONFIG_GPIO_EXAR is not set # CONFIG_GPIO_FTGPIO010 is not set # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_GRGPIO is not set # CONFIG_GPIO_HLWD is not set # CONFIG_GPIO_MB86S7X is not set CONFIG_GPIO_MPC5200=y # CONFIG_GPIO_SIFIVE is not set # CONFIG_GPIO_XILINX is not set # CONFIG_GPIO_AMD_FCH is not set # end of Memory mapped GPIO drivers # # I2C GPIO expanders # # CONFIG_GPIO_ADNP is not set # CONFIG_GPIO_FXL6408 is not set # CONFIG_GPIO_GW_PLD is not set # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCA9570 is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_TPIC2810 is not set # end of I2C GPIO expanders # # MFD GPIO expanders # # end of MFD GPIO expanders # # PCI GPIO expanders # # CONFIG_GPIO_PCI_IDIO_16 is not set # CONFIG_GPIO_PCIE_IDIO_24 is not set # CONFIG_GPIO_RDC321X is not set # end of PCI GPIO expanders # # SPI GPIO expanders # # CONFIG_GPIO_74X164 is not set # CONFIG_GPIO_MAX3191X is not set # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set # end of SPI GPIO expanders # # USB GPIO expanders # # CONFIG_GPIO_VIPERBOARD is not set # end of USB GPIO expanders # # Virtual GPIO drivers # # CONFIG_GPIO_AGGREGATOR is not set # CONFIG_GPIO_LATCH is not set # CONFIG_GPIO_MOCKUP is not set # CONFIG_GPIO_VIRTIO is not set # CONFIG_GPIO_SIM is not set # end of Virtual GPIO drivers CONFIG_W1=m CONFIG_W1_CON=y # # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=m CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m # CONFIG_W1_MASTER_GPIO is not set # CONFIG_W1_MASTER_SGI is not set # end of 1-wire Bus Masters # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m # CONFIG_W1_SLAVE_DS2405 is not set # CONFIG_W1_SLAVE_DS2408 is not set # CONFIG_W1_SLAVE_DS2413 is not set # CONFIG_W1_SLAVE_DS2406 is not set # CONFIG_W1_SLAVE_DS2423 is not set # CONFIG_W1_SLAVE_DS2805 is not set # CONFIG_W1_SLAVE_DS2430 is not set CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2438 is not set # CONFIG_W1_SLAVE_DS250X is not set # CONFIG_W1_SLAVE_DS2780 is not set # CONFIG_W1_SLAVE_DS2781 is not set # CONFIG_W1_SLAVE_DS28E04 is not set # CONFIG_W1_SLAVE_DS28E17 is not set # end of 1-wire Slaves # CONFIG_POWER_RESET is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_POWER_SUPPLY_HWMON=y # CONFIG_GENERIC_ADC_BATTERY is not set # CONFIG_IP5XXX_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_CHARGER_ADP5061 is not set # CONFIG_BATTERY_CW2015 is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set CONFIG_BATTERY_PMU=m # CONFIG_BATTERY_SAMSUNG_SDI is not set # CONFIG_BATTERY_SBS is not set # CONFIG_CHARGER_SBS is not set # CONFIG_MANAGER_SBS is not set # CONFIG_BATTERY_BQ27XXX is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_BATTERY_MAX1721X is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_GPIO is not set # CONFIG_CHARGER_LT3651 is not set # CONFIG_CHARGER_LTC4162L is not set # CONFIG_CHARGER_DETECTOR_MAX14656 is not set # CONFIG_CHARGER_MAX77976 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_BQ24257 is not set # CONFIG_CHARGER_BQ24735 is not set # CONFIG_CHARGER_BQ2515X is not set # CONFIG_CHARGER_BQ25890 is not set # CONFIG_CHARGER_BQ25980 is not set # CONFIG_CHARGER_BQ256XX is not set # CONFIG_BATTERY_GAUGE_LTC2941 is not set # CONFIG_BATTERY_GOLDFISH is not set # CONFIG_BATTERY_RT5033 is not set # CONFIG_CHARGER_RT9455 is not set # CONFIG_CHARGER_BD99954 is not set # CONFIG_BATTERY_UG3105 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_AD7314 is not set CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m # CONFIG_SENSORS_ADM1177 is not set CONFIG_SENSORS_ADM9240=m # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m # CONFIG_SENSORS_AHT10 is not set # CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set # CONFIG_SENSORS_AS370 is not set CONFIG_SENSORS_ASC7621=m # CONFIG_SENSORS_AXI_FAN_CONTROL is not set CONFIG_SENSORS_ATXP1=m # CONFIG_SENSORS_CORSAIR_CPRO is not set # CONFIG_SENSORS_CORSAIR_PSU is not set # CONFIG_SENSORS_DRIVETEMP is not set CONFIG_SENSORS_DS620=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F75375S=m # CONFIG_SENSORS_FTSTEUTATES is not set CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m # CONFIG_SENSORS_IIO_HWMON is not set CONFIG_SENSORS_JC42=m # CONFIG_SENSORS_POWR1220 is not set CONFIG_SENSORS_LINEAGE=m # CONFIG_SENSORS_LTC2945 is not set # CONFIG_SENSORS_LTC2947_I2C is not set # CONFIG_SENSORS_LTC2947_SPI is not set # CONFIG_SENSORS_LTC2990 is not set # CONFIG_SENSORS_LTC2992 is not set CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m # CONFIG_SENSORS_LTC4222 is not set CONFIG_SENSORS_LTC4245=m # CONFIG_SENSORS_LTC4260 is not set CONFIG_SENSORS_LTC4261=m CONFIG_SENSORS_MAX1111=m # CONFIG_SENSORS_MAX127 is not set CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX31722 is not set # CONFIG_SENSORS_MAX31730 is not set # CONFIG_SENSORS_MAX31760 is not set # CONFIG_MAX31827 is not set # CONFIG_SENSORS_MAX6620 is not set # CONFIG_SENSORS_MAX6621 is not set CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6650=m # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MAX31790 is not set # CONFIG_SENSORS_MC34VR500 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_TC654 is not set # CONFIG_SENSORS_TPS23861 is not set # CONFIG_SENSORS_MR75203 is not set CONFIG_SENSORS_ADCXX=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM70=m CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m # CONFIG_SENSORS_LM95234 is not set CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_NTC_THERMISTOR=m # CONFIG_SENSORS_NCT6775_I2C is not set # CONFIG_SENSORS_NCT7802 is not set # CONFIG_SENSORS_NCT7904 is not set # CONFIG_SENSORS_NPCM7XX is not set # CONFIG_SENSORS_NZXT_KRAKEN2 is not set # CONFIG_SENSORS_NZXT_SMART2 is not set # CONFIG_SENSORS_OCC_P8_I2C is not set CONFIG_SENSORS_PCF8591=m # CONFIG_PMBUS is not set # CONFIG_SENSORS_SBTSI is not set # CONFIG_SENSORS_SBRMI is not set # CONFIG_SENSORS_SHT15 is not set CONFIG_SENSORS_SHT21=m # CONFIG_SENSORS_SHT3x is not set # CONFIG_SENSORS_SHT4x is not set # CONFIG_SENSORS_SHTC1 is not set CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_EMC1403=m CONFIG_SENSORS_EMC2103=m # CONFIG_SENSORS_EMC2305 is not set CONFIG_SENSORS_EMC6W201=m CONFIG_SENSORS_SMSC47M192=m # CONFIG_SENSORS_STTS751 is not set CONFIG_SENSORS_SMM665=m # CONFIG_SENSORS_ADC128D818 is not set CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_INA238 is not set # CONFIG_SENSORS_INA3221 is not set # CONFIG_SENSORS_TC74 is not set CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m # CONFIG_SENSORS_TMP103 is not set # CONFIG_SENSORS_TMP108 is not set CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m # CONFIG_SENSORS_TMP464 is not set # CONFIG_SENSORS_TMP513 is not set CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT8231=m # CONFIG_SENSORS_W83773G is not set CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83795=m # CONFIG_SENSORS_W83795_FANCTRL is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y CONFIG_WATCHDOG_OPEN_TIMEOUT=0 # CONFIG_WATCHDOG_SYSFS is not set # CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set # # Watchdog Pretimeout Governors # # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_GPIO_WATCHDOG is not set # CONFIG_XILINX_WATCHDOG is not set # CONFIG_ZIIRAVE_WATCHDOG is not set # CONFIG_CADENCE_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_MPC5200_WDT is not set # CONFIG_MEN_A21_WDT is not set CONFIG_WATCHDOG_RTAS=m # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y CONFIG_SSB_SDIOHOST_POSSIBLE=y CONFIG_SSB_SDIOHOST=y CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_SSB_DRIVER_GPIO is not set CONFIG_BCMA_POSSIBLE=y CONFIG_BCMA=m CONFIG_BCMA_BLOCKIO=y CONFIG_BCMA_HOST_PCI_POSSIBLE=y CONFIG_BCMA_HOST_PCI=y # CONFIG_BCMA_HOST_SOC is not set CONFIG_BCMA_DRIVER_PCI=y # CONFIG_BCMA_DRIVER_GMAC_CMN is not set # CONFIG_BCMA_DRIVER_GPIO is not set # CONFIG_BCMA_DEBUG is not set # # Multifunction device drivers # CONFIG_MFD_CORE=m # CONFIG_MFD_ACT8945A is not set # CONFIG_MFD_AS3711 is not set # CONFIG_MFD_SMPRO is not set # CONFIG_MFD_AS3722 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_AAT2870_CORE is not set # CONFIG_MFD_ATMEL_FLEXCOM is not set # CONFIG_MFD_ATMEL_HLCDC is not set # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_BD9571MWV is not set # CONFIG_MFD_AXP20X_I2C is not set # CONFIG_MFD_MADERA is not set # CONFIG_MFD_MAX5970 is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_DA9062 is not set # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_DA9150 is not set # CONFIG_MFD_DLN2 is not set # CONFIG_MFD_GATEWORKS_GSC is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_MP2629 is not set # CONFIG_MFD_HI6421_PMIC is not set # CONFIG_LPC_ICH is not set CONFIG_LPC_SCH=m # CONFIG_MFD_IQS62X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_MAX14577 is not set # CONFIG_MFD_MAX77541 is not set # CONFIG_MFD_MAX77620 is not set # CONFIG_MFD_MAX77650 is not set # CONFIG_MFD_MAX77686 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX77714 is not set # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6360 is not set # CONFIG_MFD_MT6370 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set # CONFIG_MFD_OCELOT is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_CPCAP is not set CONFIG_MFD_VIPERBOARD=m # CONFIG_MFD_NTXEC is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_SY7636A is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RT4831 is not set # CONFIG_MFD_RT5033 is not set # CONFIG_MFD_RT5120 is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_RK8XX_I2C is not set # CONFIG_MFD_RK8XX_SPI is not set # CONFIG_MFD_RN5T618 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SKY81452 is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_TI_LMU is not set # CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65086 is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TI_LP873X is not set # CONFIG_MFD_TI_LP87565 is not set # CONFIG_MFD_TPS65218 is not set # CONFIG_MFD_TPS65219 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_TPS6594_I2C is not set # CONFIG_MFD_TPS6594_SPI is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TQMX86 is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_LOCHNAGAR is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_ROHM_BD718XX is not set # CONFIG_MFD_ROHM_BD71828 is not set # CONFIG_MFD_ROHM_BD957XMUF is not set # CONFIG_MFD_STPMIC1 is not set # CONFIG_MFD_STMFX is not set # CONFIG_MFD_ATC260X_I2C is not set # CONFIG_MFD_QCOM_PM8008 is not set # CONFIG_MFD_INTEL_M10_BMC_SPI is not set # CONFIG_MFD_RSMU_I2C is not set # CONFIG_MFD_RSMU_SPI is not set # end of Multifunction device drivers # CONFIG_REGULATOR is not set CONFIG_RC_CORE=m # CONFIG_LIRC is not set CONFIG_RC_MAP=m CONFIG_RC_DECODERS=y # CONFIG_IR_IMON_DECODER is not set CONFIG_IR_JVC_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_NEC_DECODER=m CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m # CONFIG_IR_RCMM_DECODER is not set CONFIG_IR_SANYO_DECODER=m CONFIG_IR_SHARP_DECODER=m CONFIG_IR_SONY_DECODER=m # CONFIG_IR_XMP_DECODER is not set CONFIG_RC_DEVICES=y # CONFIG_IR_GPIO_CIR is not set # CONFIG_IR_HIX5HD2 is not set # CONFIG_IR_IGORPLUGUSB is not set CONFIG_IR_IGUANA=m CONFIG_IR_IMON=m # CONFIG_IR_IMON_RAW is not set CONFIG_IR_MCEUSB=m CONFIG_IR_REDRAT3=m # CONFIG_IR_SERIAL is not set CONFIG_IR_STREAMZAP=m # CONFIG_IR_TOY is not set CONFIG_IR_TTUSBIR=m CONFIG_RC_ATI_REMOTE=m CONFIG_RC_LOOPBACK=m # CONFIG_RC_XBOX_DVD is not set # # CEC support # CONFIG_MEDIA_CEC_SUPPORT=y # CONFIG_CEC_CH7322 is not set # CONFIG_USB_PULSE8_CEC is not set # CONFIG_USB_RAINSHADOW_CEC is not set # end of CEC support CONFIG_MEDIA_SUPPORT=m # CONFIG_MEDIA_SUPPORT_FILTER is not set CONFIG_MEDIA_SUBDRV_AUTOSELECT=y # # Media device types # CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_SDR_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_MEDIA_TEST_SUPPORT=y # end of Media device types # # Media core support # CONFIG_VIDEO_DEV=m CONFIG_MEDIA_CONTROLLER=y CONFIG_DVB_CORE=m # end of Media core support # # Video4Linux options # CONFIG_VIDEO_V4L2_I2C=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m CONFIG_V4L2_FWNODE=m CONFIG_V4L2_ASYNC=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m # end of Video4Linux options # # Media controller options # CONFIG_MEDIA_CONTROLLER_DVB=y # end of Media controller options # # Digital TV options # # CONFIG_DVB_MMAP is not set CONFIG_DVB_NET=y CONFIG_DVB_MAX_ADAPTERS=8 CONFIG_DVB_DYNAMIC_MINORS=y # CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set # CONFIG_DVB_ULE_DEBUG is not set # end of Digital TV options # # Media drivers # # # Media drivers # CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # CONFIG_USB_GSPCA=m CONFIG_USB_GSPCA_BENQ=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_CPIA1=m CONFIG_USB_GSPCA_DTCS033=m CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m CONFIG_USB_GSPCA_JEILINJ=m CONFIG_USB_GSPCA_JL2005BCD=m CONFIG_USB_GSPCA_KINECT=m CONFIG_USB_GSPCA_KONICA=m CONFIG_USB_GSPCA_MARS=m CONFIG_USB_GSPCA_MR97310A=m CONFIG_USB_GSPCA_NW80X=m CONFIG_USB_GSPCA_OV519=m CONFIG_USB_GSPCA_OV534=m CONFIG_USB_GSPCA_OV534_9=m CONFIG_USB_GSPCA_PAC207=m CONFIG_USB_GSPCA_PAC7302=m CONFIG_USB_GSPCA_PAC7311=m CONFIG_USB_GSPCA_SE401=m CONFIG_USB_GSPCA_SN9C2028=m CONFIG_USB_GSPCA_SN9C20X=m CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m CONFIG_USB_GSPCA_SPCA1528=m CONFIG_USB_GSPCA_SPCA500=m CONFIG_USB_GSPCA_SPCA501=m CONFIG_USB_GSPCA_SPCA505=m CONFIG_USB_GSPCA_SPCA506=m CONFIG_USB_GSPCA_SPCA508=m CONFIG_USB_GSPCA_SPCA561=m CONFIG_USB_GSPCA_SQ905=m CONFIG_USB_GSPCA_SQ905C=m CONFIG_USB_GSPCA_SQ930X=m CONFIG_USB_GSPCA_STK014=m CONFIG_USB_GSPCA_STK1135=m CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TOPRO=m # CONFIG_USB_GSPCA_TOUPTEK is not set CONFIG_USB_GSPCA_TV8532=m CONFIG_USB_GSPCA_VC032X=m CONFIG_USB_GSPCA_VICAM=m CONFIG_USB_GSPCA_XIRLINK_CIT=m CONFIG_USB_GSPCA_ZC3XX=m CONFIG_USB_GL860=m CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_PWC_INPUT_EVDEV=y CONFIG_USB_S2255=m CONFIG_VIDEO_USBTV=m CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y # # Analog TV USB devices # # CONFIG_VIDEO_GO7007 is not set CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_STK1160=m # # Analog/digital TV USB devices # CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_AU0828_V4L2=y # CONFIG_VIDEO_AU0828_RC is not set CONFIG_VIDEO_CX231XX=m CONFIG_VIDEO_CX231XX_RC=y CONFIG_VIDEO_CX231XX_ALSA=m CONFIG_VIDEO_CX231XX_DVB=m # # Digital TV USB devices # # CONFIG_DVB_AS102 is not set CONFIG_DVB_B2C2_FLEXCOP_USB=m # CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set CONFIG_DVB_USB_V2=m CONFIG_DVB_USB_AF9015=m CONFIG_DVB_USB_AF9035=m CONFIG_DVB_USB_ANYSEE=m CONFIG_DVB_USB_AU6610=m CONFIG_DVB_USB_AZ6007=m CONFIG_DVB_USB_CE6230=m # CONFIG_DVB_USB_DVBSKY is not set CONFIG_DVB_USB_EC168=m CONFIG_DVB_USB_GL861=m CONFIG_DVB_USB_LME2510=m CONFIG_DVB_USB_MXL111SF=m CONFIG_DVB_USB_RTL28XXU=m # CONFIG_DVB_USB_ZD1301 is not set CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set CONFIG_DVB_USB_A800=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m CONFIG_DVB_USB_AZ6027=m CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_CXUSB=m # CONFIG_DVB_USB_CXUSB_ANALOG is not set CONFIG_DVB_USB_DIB0700=m CONFIG_DVB_USB_DIB3000MC=m CONFIG_DVB_USB_DIBUSB_MB=m CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y CONFIG_DVB_USB_DIBUSB_MC=m CONFIG_DVB_USB_DIGITV=m CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_DTV5100=m CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_GP8PSK=m CONFIG_DVB_USB_M920X=m CONFIG_DVB_USB_NOVA_T_USB2=m CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_PCTV452E=m CONFIG_DVB_USB_TECHNISAT_USB2=m CONFIG_DVB_USB_TTUSB2=m CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_VP702X=m CONFIG_DVB_USB_VP7045=m CONFIG_SMS_USB_DRV=m CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_V4L2=m CONFIG_VIDEO_EM28XX_ALSA=m CONFIG_VIDEO_EM28XX_DVB=m CONFIG_VIDEO_EM28XX_RC=m # # Software defined radio USB devices # # CONFIG_USB_AIRSPY is not set # CONFIG_USB_HACKRF is not set # CONFIG_USB_MSI2500 is not set CONFIG_MEDIA_PCI_SUPPORT=y # # Media capture support # # CONFIG_VIDEO_SOLO6X10 is not set # CONFIG_VIDEO_TW5864 is not set # CONFIG_VIDEO_TW68 is not set # CONFIG_VIDEO_TW686X is not set CONFIG_VIDEO_ZORAN=m # CONFIG_VIDEO_ZORAN_DC30 is not set # CONFIG_VIDEO_ZORAN_ZR36060 is not set # # Media capture/analog TV support # # CONFIG_VIDEO_DT3155 is not set CONFIG_VIDEO_IVTV=m CONFIG_VIDEO_IVTV_ALSA=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_MXB=m # # Media capture/analog/hybrid TV support # CONFIG_VIDEO_BT848=m CONFIG_DVB_BT8XX=m CONFIG_VIDEO_CX18=m CONFIG_VIDEO_CX18_ALSA=m CONFIG_VIDEO_CX23885=m CONFIG_MEDIA_ALTERA_CI=m # CONFIG_VIDEO_CX25821 is not set CONFIG_VIDEO_CX88=m CONFIG_VIDEO_CX88_ALSA=m CONFIG_VIDEO_CX88_BLACKBIRD=m CONFIG_VIDEO_CX88_DVB=m CONFIG_VIDEO_CX88_ENABLE_VP3054=y CONFIG_VIDEO_CX88_VP3054=m CONFIG_VIDEO_CX88_MPEG=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_RC=y CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_SAA7164=m # # Media digital TV PCI Adapters # CONFIG_DVB_B2C2_FLEXCOP_PCI=m # CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set CONFIG_DVB_DDBRIDGE=m # CONFIG_DVB_DDBRIDGE_MSIENABLE is not set CONFIG_DVB_DM1105=m CONFIG_MANTIS_CORE=m CONFIG_DVB_MANTIS=m CONFIG_DVB_HOPPER=m # CONFIG_DVB_NETUP_UNIDVB is not set CONFIG_DVB_NGENE=m CONFIG_DVB_PLUTO2=m CONFIG_DVB_PT1=m # CONFIG_DVB_PT3 is not set # CONFIG_DVB_SMIPCIE is not set CONFIG_DVB_BUDGET_CORE=m CONFIG_DVB_BUDGET=m CONFIG_DVB_BUDGET_CI=m CONFIG_DVB_BUDGET_AV=m CONFIG_RADIO_ADAPTERS=m CONFIG_RADIO_MAXIRADIO=m # CONFIG_RADIO_SAA7706H is not set CONFIG_RADIO_SHARK=m CONFIG_RADIO_SHARK2=m # CONFIG_RADIO_SI4713 is not set CONFIG_RADIO_TEA575X=m # CONFIG_RADIO_TEA5764 is not set # CONFIG_RADIO_TEF6862 is not set # CONFIG_RADIO_WL1273 is not set CONFIG_USB_DSBR=m CONFIG_USB_KEENE=m CONFIG_USB_MA901=m CONFIG_USB_MR800=m CONFIG_USB_RAREMONO=m CONFIG_RADIO_SI470X=m CONFIG_USB_SI470X=m # CONFIG_I2C_SI470X is not set CONFIG_MEDIA_PLATFORM_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y # CONFIG_SDR_PLATFORM_DRIVERS is not set # CONFIG_DVB_PLATFORM_DRIVERS is not set CONFIG_V4L_MEM2MEM_DRIVERS=y # CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set # CONFIG_VIDEO_MUX is not set # # Allegro DVT media platform drivers # # # Amlogic media platform drivers # # # Amphion drivers # # # Aspeed media platform drivers # # # Atmel media platform drivers # # # Cadence media platform drivers # # CONFIG_VIDEO_CADENCE_CSI2RX is not set # CONFIG_VIDEO_CADENCE_CSI2TX is not set # # Chips&Media media platform drivers # # # Intel media platform drivers # # # Marvell media platform drivers # CONFIG_VIDEO_CAFE_CCIC=m # # Mediatek media platform drivers # # # Microchip Technology, Inc. media platform drivers # # # NVidia media platform drivers # # # NXP media platform drivers # # # Qualcomm media platform drivers # # # Renesas media platform drivers # # # Rockchip media platform drivers # # # Samsung media platform drivers # # # STMicroelectronics media platform drivers # # # Sunxi media platform drivers # # # Texas Instruments drivers # # # Verisilicon media platform drivers # # # VIA media platform drivers # # # Xilinx media platform drivers # # CONFIG_VIDEO_XILINX is not set # # MMC/SDIO DVB adapters # CONFIG_SMS_SDIO_DRV=m CONFIG_V4L_TEST_DRIVERS=y # CONFIG_VIDEO_VIM2M is not set # CONFIG_VIDEO_VICODEC is not set # CONFIG_VIDEO_VIMC is not set # CONFIG_VIDEO_VIVID is not set # CONFIG_VIDEO_VISL is not set # CONFIG_DVB_TEST_DRIVERS is not set # # FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=m CONFIG_DVB_FIREDTV_INPUT=y CONFIG_MEDIA_COMMON_OPTIONS=y # # common driver options # CONFIG_CYPRESS_FIRMWARE=m CONFIG_TTPCI_EEPROM=m CONFIG_UVC_COMMON=m CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y # CONFIG_SMS_SIANO_DEBUGFS is not set CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_V4L2=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_DMA_CONTIG=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m CONFIG_VIDEOBUF2_DVB=m # end of Media drivers # # Media ancillary drivers # CONFIG_MEDIA_ATTACH=y # # IR I2C driver auto-selected by 'Autoselect ancillary drivers' # CONFIG_VIDEO_IR_I2C=m # # Camera sensor devices # # CONFIG_VIDEO_AR0521 is not set # CONFIG_VIDEO_HI556 is not set # CONFIG_VIDEO_HI846 is not set # CONFIG_VIDEO_HI847 is not set # CONFIG_VIDEO_IMX208 is not set # CONFIG_VIDEO_IMX214 is not set # CONFIG_VIDEO_IMX219 is not set # CONFIG_VIDEO_IMX258 is not set # CONFIG_VIDEO_IMX274 is not set # CONFIG_VIDEO_IMX290 is not set # CONFIG_VIDEO_IMX296 is not set # CONFIG_VIDEO_IMX319 is not set # CONFIG_VIDEO_IMX334 is not set # CONFIG_VIDEO_IMX335 is not set # CONFIG_VIDEO_IMX355 is not set # CONFIG_VIDEO_IMX412 is not set # CONFIG_VIDEO_IMX415 is not set # CONFIG_VIDEO_MT9M001 is not set # CONFIG_VIDEO_MT9M111 is not set # CONFIG_VIDEO_MT9P031 is not set # CONFIG_VIDEO_MT9T112 is not set CONFIG_VIDEO_MT9V011=m # CONFIG_VIDEO_MT9V032 is not set # CONFIG_VIDEO_MT9V111 is not set # CONFIG_VIDEO_OG01A1B is not set # CONFIG_VIDEO_OV01A10 is not set # CONFIG_VIDEO_OV02A10 is not set # CONFIG_VIDEO_OV08D10 is not set # CONFIG_VIDEO_OV08X40 is not set # CONFIG_VIDEO_OV13858 is not set # CONFIG_VIDEO_OV13B10 is not set CONFIG_VIDEO_OV2640=m # CONFIG_VIDEO_OV2659 is not set # CONFIG_VIDEO_OV2680 is not set # CONFIG_VIDEO_OV2685 is not set # CONFIG_VIDEO_OV4689 is not set # CONFIG_VIDEO_OV5640 is not set # CONFIG_VIDEO_OV5645 is not set # CONFIG_VIDEO_OV5647 is not set # CONFIG_VIDEO_OV5648 is not set # CONFIG_VIDEO_OV5670 is not set # CONFIG_VIDEO_OV5675 is not set # CONFIG_VIDEO_OV5693 is not set # CONFIG_VIDEO_OV5695 is not set # CONFIG_VIDEO_OV6650 is not set # CONFIG_VIDEO_OV7251 is not set # CONFIG_VIDEO_OV7640 is not set CONFIG_VIDEO_OV7670=m # CONFIG_VIDEO_OV772X is not set # CONFIG_VIDEO_OV7740 is not set # CONFIG_VIDEO_OV8856 is not set # CONFIG_VIDEO_OV8858 is not set # CONFIG_VIDEO_OV8865 is not set # CONFIG_VIDEO_OV9282 is not set # CONFIG_VIDEO_OV9640 is not set # CONFIG_VIDEO_OV9650 is not set # CONFIG_VIDEO_RDACM20 is not set # CONFIG_VIDEO_RDACM21 is not set # CONFIG_VIDEO_RJ54N1 is not set # CONFIG_VIDEO_S5C73M3 is not set # CONFIG_VIDEO_S5K5BAF is not set # CONFIG_VIDEO_S5K6A3 is not set # CONFIG_VIDEO_ST_VGXY61 is not set # CONFIG_VIDEO_CCS is not set # CONFIG_VIDEO_ET8EK8 is not set # end of Camera sensor devices # # Lens drivers # # CONFIG_VIDEO_AD5820 is not set # CONFIG_VIDEO_AK7375 is not set # CONFIG_VIDEO_DW9714 is not set # CONFIG_VIDEO_DW9768 is not set # CONFIG_VIDEO_DW9807_VCM is not set # end of Lens drivers # # Flash devices # # CONFIG_VIDEO_ADP1653 is not set # CONFIG_VIDEO_LM3560 is not set # CONFIG_VIDEO_LM3646 is not set # end of Flash devices # # Audio decoders, processors and mixers # CONFIG_VIDEO_CS3308=m CONFIG_VIDEO_CS5345=m CONFIG_VIDEO_CS53L32A=m CONFIG_VIDEO_MSP3400=m # CONFIG_VIDEO_SONY_BTF_MPX is not set CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_TDA9840=m CONFIG_VIDEO_TEA6415C=m CONFIG_VIDEO_TEA6420=m # CONFIG_VIDEO_TLV320AIC23B is not set CONFIG_VIDEO_TVAUDIO=m # CONFIG_VIDEO_UDA1342 is not set CONFIG_VIDEO_VP27SMPX=m CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_WM8775=m # end of Audio decoders, processors and mixers # # RDS decoders # CONFIG_VIDEO_SAA6588=m # end of RDS decoders # # Video decoders # # CONFIG_VIDEO_ADV7180 is not set # CONFIG_VIDEO_ADV7183 is not set # CONFIG_VIDEO_ADV748X is not set # CONFIG_VIDEO_ADV7604 is not set # CONFIG_VIDEO_ADV7842 is not set CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_BT866=m # CONFIG_VIDEO_ISL7998X is not set CONFIG_VIDEO_KS0127=m # CONFIG_VIDEO_MAX9286 is not set # CONFIG_VIDEO_ML86V7667 is not set CONFIG_VIDEO_SAA7110=m CONFIG_VIDEO_SAA711X=m # CONFIG_VIDEO_TC358743 is not set # CONFIG_VIDEO_TC358746 is not set # CONFIG_VIDEO_TVP514X is not set CONFIG_VIDEO_TVP5150=m # CONFIG_VIDEO_TVP7002 is not set # CONFIG_VIDEO_TW2804 is not set # CONFIG_VIDEO_TW9903 is not set # CONFIG_VIDEO_TW9906 is not set # CONFIG_VIDEO_TW9910 is not set CONFIG_VIDEO_VPX3220=m # # Video and audio decoders # CONFIG_VIDEO_SAA717X=m CONFIG_VIDEO_CX25840=m # end of Video decoders # # Video encoders # CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m # CONFIG_VIDEO_ADV7343 is not set # CONFIG_VIDEO_ADV7393 is not set # CONFIG_VIDEO_ADV7511 is not set # CONFIG_VIDEO_AK881X is not set CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m # CONFIG_VIDEO_THS8200 is not set # end of Video encoders # # Video improvement chips # CONFIG_VIDEO_UPD64031A=m CONFIG_VIDEO_UPD64083=m # end of Video improvement chips # # Audio/Video compression chips # CONFIG_VIDEO_SAA6752HS=m # end of Audio/Video compression chips # # SDR tuner chips # # CONFIG_SDR_MAX2175 is not set # end of SDR tuner chips # # Miscellaneous helper chips # # CONFIG_VIDEO_I2C is not set CONFIG_VIDEO_M52790=m # CONFIG_VIDEO_ST_MIPID02 is not set # CONFIG_VIDEO_THS7303 is not set # end of Miscellaneous helper chips # # Media SPI Adapters # # CONFIG_CXD2880_SPI_DRV is not set # CONFIG_VIDEO_GS1662 is not set # end of Media SPI Adapters CONFIG_MEDIA_TUNER=m # # Customize TV tuners # CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC0011=m CONFIG_MEDIA_TUNER_FC0012=m CONFIG_MEDIA_TUNER_FC0013=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_M88RS6000T=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_MEDIA_TUNER_MSI001 is not set CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2063=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_MT2266=m # CONFIG_MEDIA_TUNER_MXL301RF is not set CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_QM1D1B0004=m CONFIG_MEDIA_TUNER_QM1D1C0042=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_R820T=m CONFIG_MEDIA_TUNER_SI2157=m CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_MEDIA_TUNER_TDA18218=m CONFIG_MEDIA_TUNER_TDA18250=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_TUA9001=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_XC5000=m # end of Customize TV tuners # # Customise DVB Frontends # # # Multistandard (satellite) frontends # CONFIG_DVB_M88DS3103=m CONFIG_DVB_MXL5XX=m CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m CONFIG_DVB_STV090x=m CONFIG_DVB_STV0910=m CONFIG_DVB_STV6110x=m CONFIG_DVB_STV6111=m # # Multistandard (cable + terrestrial) frontends # CONFIG_DVB_DRXK=m CONFIG_DVB_MN88472=m CONFIG_DVB_MN88473=m CONFIG_DVB_SI2165=m CONFIG_DVB_TDA18271C2DD=m # # DVB-S (satellite) frontends # CONFIG_DVB_CX24110=m CONFIG_DVB_CX24116=m CONFIG_DVB_CX24117=m CONFIG_DVB_CX24120=m CONFIG_DVB_CX24123=m CONFIG_DVB_DS3000=m CONFIG_DVB_MB86A16=m CONFIG_DVB_MT312=m CONFIG_DVB_S5H1420=m CONFIG_DVB_SI21XX=m CONFIG_DVB_STB6000=m CONFIG_DVB_STV0288=m CONFIG_DVB_STV0299=m CONFIG_DVB_STV0900=m CONFIG_DVB_STV6110=m CONFIG_DVB_TDA10071=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA8261=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TS2020=m CONFIG_DVB_TUA6100=m CONFIG_DVB_TUNER_CX24113=m CONFIG_DVB_TUNER_ITD1000=m CONFIG_DVB_VES1X93=m CONFIG_DVB_ZL10036=m CONFIG_DVB_ZL10039=m # # DVB-T (terrestrial) frontends # CONFIG_DVB_AF9013=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m CONFIG_DVB_CXD2820R=m CONFIG_DVB_CXD2841ER=m CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m # CONFIG_DVB_DIB9000 is not set CONFIG_DVB_DRXD=m CONFIG_DVB_EC100=m CONFIG_DVB_GP8PSK_FE=m CONFIG_DVB_L64781=m CONFIG_DVB_MT352=m CONFIG_DVB_NXT6000=m CONFIG_DVB_RTL2830=m CONFIG_DVB_RTL2832=m CONFIG_DVB_RTL2832_SDR=m # CONFIG_DVB_S5H1432 is not set CONFIG_DVB_SI2168=m CONFIG_DVB_SP887X=m CONFIG_DVB_STV0367=m CONFIG_DVB_TDA10048=m CONFIG_DVB_TDA1004X=m # CONFIG_DVB_ZD1301_DEMOD is not set CONFIG_DVB_ZL10353=m # CONFIG_DVB_CXD2880 is not set # # DVB-C (cable) frontends # CONFIG_DVB_STV0297=m CONFIG_DVB_TDA10021=m CONFIG_DVB_TDA10023=m CONFIG_DVB_VES1820=m # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_AU8522=m CONFIG_DVB_AU8522_DTV=m CONFIG_DVB_AU8522_V4L=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LG2160=m CONFIG_DVB_LGDT3305=m CONFIG_DVB_LGDT3306A=m CONFIG_DVB_LGDT330X=m CONFIG_DVB_MXL692=m CONFIG_DVB_NXT200X=m CONFIG_DVB_OR51132=m CONFIG_DVB_OR51211=m CONFIG_DVB_S5H1409=m CONFIG_DVB_S5H1411=m # # ISDB-T (terrestrial) frontends # CONFIG_DVB_DIB8000=m CONFIG_DVB_MB86A20S=m CONFIG_DVB_S921=m # # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # # CONFIG_DVB_MN88443X is not set CONFIG_DVB_TC90522=m # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S # CONFIG_DVB_A8293=m CONFIG_DVB_AF9033=m # CONFIG_DVB_ASCOT2E is not set CONFIG_DVB_ATBM8830=m # CONFIG_DVB_HELENE is not set # CONFIG_DVB_HORUS3A is not set CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m CONFIG_DVB_ISL6423=m CONFIG_DVB_IX2505V=m # CONFIG_DVB_LGS8GL5 is not set CONFIG_DVB_LGS8GXX=m CONFIG_DVB_LNBH25=m # CONFIG_DVB_LNBH29 is not set CONFIG_DVB_LNBP21=m CONFIG_DVB_LNBP22=m CONFIG_DVB_M88RS2000=m CONFIG_DVB_TDA665x=m CONFIG_DVB_DRX39XYJ=m # # Common Interface (EN50221) controller drivers # CONFIG_DVB_CXD2099=m # CONFIG_DVB_SP2 is not set # end of Customise DVB Frontends # # Tools to develop new frontends # # CONFIG_DVB_DUMMY_FE is not set # end of Media ancillary drivers # # Graphics support # CONFIG_APERTURE_HELPERS=y CONFIG_VIDEO_CMDLINE=y CONFIG_VIDEO_NOMODESET=y CONFIG_AGP=y CONFIG_AGP_UNINORTH=y CONFIG_DRM=m CONFIG_DRM_KMS_HELPER=m # CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_DISPLAY_HELPER=m CONFIG_DRM_DISPLAY_DP_HELPER=y CONFIG_DRM_DISPLAY_HDMI_HELPER=y # CONFIG_DRM_DP_AUX_CHARDEV is not set # CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m CONFIG_DRM_VRAM_HELPER=m CONFIG_DRM_TTM_HELPER=m CONFIG_DRM_GEM_SHMEM_HELPER=m CONFIG_DRM_SUBALLOC_HELPER=m # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_I2C_NXP_TDA9950 is not set # end of I2C encoder or helper chips # # ARM devices # # CONFIG_DRM_KOMEDA is not set # end of ARM devices CONFIG_DRM_RADEON=m # CONFIG_DRM_RADEON_USERPTR is not set # CONFIG_DRM_AMDGPU is not set CONFIG_DRM_NOUVEAU=m CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 # CONFIG_NOUVEAU_DEBUG_MMU is not set # CONFIG_NOUVEAU_DEBUG_PUSH is not set CONFIG_DRM_NOUVEAU_BACKLIGHT=y # CONFIG_DRM_VGEM is not set # CONFIG_DRM_VKMS is not set CONFIG_DRM_UDL=m # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set CONFIG_DRM_QXL=m # CONFIG_DRM_VIRTIO_GPU is not set CONFIG_DRM_PANEL=y # # Display Panels # # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set # CONFIG_DRM_PANEL_AUO_A030JTN01 is not set # CONFIG_DRM_PANEL_LVDS is not set # CONFIG_DRM_PANEL_SIMPLE is not set # CONFIG_DRM_PANEL_EDP is not set # CONFIG_DRM_PANEL_ILITEK_IL9322 is not set # CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set # CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set # CONFIG_DRM_PANEL_LG_LB035Q02 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set # CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set # CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set # CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set # CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set # CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set # CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set # CONFIG_DRM_PANEL_SONY_ACX565AKM is not set # CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set # CONFIG_DRM_PANEL_TPO_TPG110 is not set # CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set # end of Display Panels CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # # CONFIG_DRM_CHIPONE_ICN6211 is not set # CONFIG_DRM_CHRONTEL_CH7033 is not set # CONFIG_DRM_DISPLAY_CONNECTOR is not set # CONFIG_DRM_ITE_IT6505 is not set # CONFIG_DRM_LONTIUM_LT8912B is not set # CONFIG_DRM_LONTIUM_LT9211 is not set # CONFIG_DRM_LONTIUM_LT9611 is not set # CONFIG_DRM_LONTIUM_LT9611UXC is not set # CONFIG_DRM_ITE_IT66121 is not set # CONFIG_DRM_LVDS_CODEC is not set # CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set # CONFIG_DRM_NWL_MIPI_DSI is not set # CONFIG_DRM_NXP_PTN3460 is not set # CONFIG_DRM_PARADE_PS8622 is not set # CONFIG_DRM_PARADE_PS8640 is not set # CONFIG_DRM_SAMSUNG_DSIM is not set # CONFIG_DRM_SIL_SII8620 is not set # CONFIG_DRM_SII902X is not set # CONFIG_DRM_SII9234 is not set # CONFIG_DRM_SIMPLE_BRIDGE is not set # CONFIG_DRM_THINE_THC63LVD1024 is not set # CONFIG_DRM_TOSHIBA_TC358762 is not set # CONFIG_DRM_TOSHIBA_TC358764 is not set # CONFIG_DRM_TOSHIBA_TC358767 is not set # CONFIG_DRM_TOSHIBA_TC358768 is not set # CONFIG_DRM_TOSHIBA_TC358775 is not set # CONFIG_DRM_TI_DLPC3433 is not set # CONFIG_DRM_TI_TFP410 is not set # CONFIG_DRM_TI_SN65DSI83 is not set # CONFIG_DRM_TI_SN65DSI86 is not set # CONFIG_DRM_TI_TPD12S015 is not set # CONFIG_DRM_ANALOGIX_ANX6345 is not set # CONFIG_DRM_ANALOGIX_ANX78XX is not set # CONFIG_DRM_ANALOGIX_ANX7625 is not set # CONFIG_DRM_I2C_ADV7511 is not set # CONFIG_DRM_CDNS_DSI is not set # CONFIG_DRM_CDNS_MHDP8546 is not set # end of Display Interface Bridges # CONFIG_DRM_ETNAVIV is not set # CONFIG_DRM_LOGICVC is not set # CONFIG_DRM_ARCPGU is not set CONFIG_DRM_BOCHS=m CONFIG_DRM_CIRRUS_QEMU=m # CONFIG_DRM_GM12U320 is not set # CONFIG_DRM_OFDRM is not set # CONFIG_DRM_PANEL_MIPI_DBI is not set # CONFIG_DRM_SIMPLEDRM is not set # CONFIG_TINYDRM_HX8357D is not set # CONFIG_TINYDRM_ILI9163 is not set # CONFIG_TINYDRM_ILI9225 is not set # CONFIG_TINYDRM_ILI9341 is not set # CONFIG_TINYDRM_ILI9486 is not set # CONFIG_TINYDRM_MI0283QT is not set # CONFIG_TINYDRM_REPAPER is not set # CONFIG_TINYDRM_ST7586 is not set # CONFIG_TINYDRM_ST7735R is not set # CONFIG_DRM_GUD is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_LEGACY is not set CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m # # Frame buffer Devices # CONFIG_FB_NOTIFY=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_IO_HELPERS=y CONFIG_FB_SYS_HELPERS=y CONFIG_FB_SYS_HELPERS_DEFERRED=y CONFIG_FB_SVGALIB=m CONFIG_FB_MACMODES=y CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # CONFIG_FB_CIRRUS=m # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y CONFIG_FB_CONTROL=y CONFIG_FB_PLATINUM=y CONFIG_FB_VALKYRIE=y CONFIG_FB_CT65550=y # CONFIG_FB_ASILIANT is not set CONFIG_FB_IMSTT=y # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set # CONFIG_FB_OPENCORES is not set CONFIG_FB_S1D13XXX=m # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=y CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y CONFIG_FB_S3=m CONFIG_FB_S3_DDC=y CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y CONFIG_FB_SAVAGE_ACCEL=y CONFIG_FB_SIS=y CONFIG_FB_SIS_300=y CONFIG_FB_SIS_315=y CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=y # CONFIG_FB_3DFX_ACCEL is not set CONFIG_FB_3DFX_I2C=y CONFIG_FB_VOODOO1=y CONFIG_FB_VT8623=m CONFIG_FB_TRIDENT=m CONFIG_FB_ARK=m CONFIG_FB_PM3=m # CONFIG_FB_CARMINE is not set CONFIG_FB_SMSCUFX=m CONFIG_FB_UDL=m CONFIG_FB_IBM_GXT4500=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set CONFIG_FB_MB862XX=m CONFIG_FB_MB862XX_PCI_GDC=y # CONFIG_FB_MB862XX_LIME is not set CONFIG_FB_MB862XX_I2C=y # CONFIG_FB_SIMPLE is not set # CONFIG_FB_SSD1307 is not set # CONFIG_FB_SM712 is not set # end of Frame buffer Devices # # Backlight & LCD device support # # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_KTD253 is not set # CONFIG_BACKLIGHT_KTZ8866 is not set # CONFIG_BACKLIGHT_QCOM_WLED is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_GPIO is not set # CONFIG_BACKLIGHT_LV5207LP is not set # CONFIG_BACKLIGHT_BD6107 is not set # CONFIG_BACKLIGHT_ARCXCNN is not set # CONFIG_BACKLIGHT_LED is not set # end of Backlight & LCD device support CONFIG_VGASTATE=m CONFIG_HDMI=y # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set # end of Console display driver support # CONFIG_LOGO is not set # end of Graphics support # CONFIG_DRM_ACCEL is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_SEQ_DEVICE=m CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_JACK_INPUT_DEV=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_PCM_TIMER=y CONFIG_SND_HRTIMER=m CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_PROC_FS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set CONFIG_SND_CTL_FAST_LOOKUP=y # CONFIG_SND_DEBUG is not set # CONFIG_SND_CTL_INPUT_VALIDATION is not set CONFIG_SND_VMASTER=y CONFIG_SND_CTL_LED=m CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m # CONFIG_SND_SEQUENCER_OSS is not set CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_SEQ_MIDI_EVENT=m CONFIG_SND_SEQ_MIDI=m CONFIG_SND_SEQ_MIDI_EMUL=m CONFIG_SND_SEQ_VIRMIDI=m # CONFIG_SND_SEQ_UMP is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_OPL3_LIB_SEQ=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set CONFIG_SND_ALOOP=m # CONFIG_SND_PCMTEST is not set CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set CONFIG_SND_MTS64=m # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_PORTMAN2X4=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 CONFIG_SND_SB_COMMON=m CONFIG_SND_PCI=y CONFIG_SND_AD1889=m CONFIG_SND_ALS300=m CONFIG_SND_ALS4000=m # CONFIG_SND_ALI5451 is not set CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m # CONFIG_SND_AW2 is not set CONFIG_SND_AZT3328=m CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=m CONFIG_SND_OXYGEN_LIB=m CONFIG_SND_OXYGEN=m CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CTXFI=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m CONFIG_SND_DARLA24=m CONFIG_SND_GINA24=m CONFIG_SND_LAYLA24=m CONFIG_SND_MONA=m CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m CONFIG_SND_INDIGOIOX=m CONFIG_SND_INDIGODJX=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m CONFIG_SND_ES1938=m CONFIG_SND_ES1968=m CONFIG_SND_ES1968_INPUT=y CONFIG_SND_ES1968_RADIO=y CONFIG_SND_FM801=m CONFIG_SND_FM801_TEA575X_BOOL=y CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set CONFIG_SND_KORG1212=m CONFIG_SND_LOLA=m CONFIG_SND_LX6464ES=m CONFIG_SND_MAESTRO3=m CONFIG_SND_MAESTRO3_INPUT=y CONFIG_SND_MIXART=m CONFIG_SND_NM256=m CONFIG_SND_PCXHR=m CONFIG_SND_RIPTIDE=m CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m CONFIG_SND_SONICVIBES=m CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VIRTUOSO=m CONFIG_SND_VX222=m CONFIG_SND_YMFPCI=m # # HD-Audio # CONFIG_SND_HDA=m CONFIG_SND_HDA_GENERIC_LEDS=y CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=m CONFIG_SND_HDA_CODEC_ANALOG=m CONFIG_SND_HDA_CODEC_SIGMATEL=m CONFIG_SND_HDA_CODEC_VIA=m CONFIG_SND_HDA_CODEC_HDMI=m CONFIG_SND_HDA_CODEC_CIRRUS=m # CONFIG_SND_HDA_CODEC_CS8409 is not set CONFIG_SND_HDA_CODEC_CONEXANT=m CONFIG_SND_HDA_CODEC_CA0110=m CONFIG_SND_HDA_CODEC_CA0132=m CONFIG_SND_HDA_CODEC_CA0132_DSP=y CONFIG_SND_HDA_CODEC_CMEDIA=m CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 # CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set # CONFIG_SND_HDA_CTL_DEV_ID is not set # end of HD-Audio CONFIG_SND_HDA_CORE=m CONFIG_SND_HDA_DSP_LOADER=y CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_PREALLOC_SIZE=64 CONFIG_SND_INTEL_DSP_CONFIG=m CONFIG_SND_PPC=y CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y CONFIG_SND_AOA=m CONFIG_SND_AOA_FABRIC_LAYOUT=m CONFIG_SND_AOA_ONYX=m CONFIG_SND_AOA_TAS=m CONFIG_SND_AOA_TOONIE=m CONFIG_SND_AOA_SOUNDBUS=m CONFIG_SND_AOA_SOUNDBUS_I2S=m CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_AUDIO_MIDI_V2 is not set CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y CONFIG_SND_USB_UA101=m CONFIG_SND_USB_USX2Y=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_6FIRE=m CONFIG_SND_USB_HIFACE=m CONFIG_SND_BCD2000=m # CONFIG_SND_USB_POD is not set # CONFIG_SND_USB_PODHD is not set # CONFIG_SND_USB_TONEPORT is not set # CONFIG_SND_USB_VARIAX is not set CONFIG_SND_FIREWIRE=y CONFIG_SND_FIREWIRE_LIB=m CONFIG_SND_DICE=m # CONFIG_SND_OXFW is not set CONFIG_SND_ISIGHT=m CONFIG_SND_FIREWORKS=m CONFIG_SND_BEBOB=m # CONFIG_SND_FIREWIRE_DIGI00X is not set # CONFIG_SND_FIREWIRE_TASCAM is not set # CONFIG_SND_FIREWIRE_MOTU is not set # CONFIG_SND_FIREFACE is not set CONFIG_SND_PCMCIA=y CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m # CONFIG_SND_SOC is not set CONFIG_SND_SYNTH_EMUX=m # CONFIG_SND_VIRTIO is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_BATTERY_STRENGTH is not set CONFIG_HIDRAW=y CONFIG_UHID=m CONFIG_HID_GENERIC=m # # Special HID drivers # CONFIG_HID_A4TECH=m # CONFIG_HID_ACCUTOUCH is not set CONFIG_HID_ACRUX=m CONFIG_HID_ACRUX_FF=y CONFIG_HID_APPLE=m CONFIG_HID_APPLEIR=m # CONFIG_HID_ASUS is not set CONFIG_HID_AUREAL=m CONFIG_HID_BELKIN=m # CONFIG_HID_BETOP_FF is not set # CONFIG_HID_BIGBEN_FF is not set CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m # CONFIG_HID_CORSAIR is not set # CONFIG_HID_COUGAR is not set # CONFIG_HID_MACALLY is not set CONFIG_HID_PRODIKEYS=m # CONFIG_HID_CMEDIA is not set # CONFIG_HID_CP2112 is not set # CONFIG_HID_CREATIVE_SB0540 is not set CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m # CONFIG_HID_ELAN is not set CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m # CONFIG_HID_EVISION is not set CONFIG_HID_EZKEY=m # CONFIG_HID_FT260 is not set # CONFIG_HID_GEMBIRD is not set # CONFIG_HID_GFRM is not set # CONFIG_HID_GLORIOUS is not set CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y # CONFIG_HID_VIVALDI is not set # CONFIG_HID_GT683R is not set CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=m CONFIG_HID_UCLOGIC=m CONFIG_HID_WALTOP=m # CONFIG_HID_VIEWSONIC is not set # CONFIG_HID_VRC2 is not set # CONFIG_HID_XIAOMI is not set CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m # CONFIG_HID_ITE is not set # CONFIG_HID_JABRA is not set CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m CONFIG_HID_LED=m # CONFIG_HID_LENOVO is not set # CONFIG_HID_LETSKETCH is not set CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m # CONFIG_HID_MALTRON is not set # CONFIG_HID_MAYFLASH is not set # CONFIG_HID_MEGAWORLD_FF is not set # CONFIG_HID_REDRAGON is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m # CONFIG_HID_NINTENDO is not set # CONFIG_HID_NTI is not set CONFIG_HID_NTRIG=m # CONFIG_HID_NVIDIA_SHIELD is not set CONFIG_HID_ORTEK=m CONFIG_HID_PANTHERLORD=m CONFIG_PANTHERLORD_FF=y # CONFIG_HID_PENMOUNT is not set CONFIG_HID_PETALYNX=m CONFIG_HID_PICOLCD=m CONFIG_HID_PICOLCD_FB=y CONFIG_HID_PICOLCD_BACKLIGHT=y CONFIG_HID_PICOLCD_LEDS=y CONFIG_HID_PICOLCD_CIR=y # CONFIG_HID_PLANTRONICS is not set # CONFIG_HID_PXRC is not set # CONFIG_HID_RAZER is not set CONFIG_HID_PRIMAX=m # CONFIG_HID_RETRODE is not set CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=m # CONFIG_HID_SEMITEK is not set # CONFIG_HID_SIGMAMICRO is not set CONFIG_HID_SONY=m CONFIG_SONY_FF=y CONFIG_HID_SPEEDLINK=m # CONFIG_HID_STEAM is not set CONFIG_HID_STEELSERIES=m CONFIG_HID_SUNPLUS=m CONFIG_HID_RMI=m CONFIG_HID_GREENASIA=m CONFIG_GREENASIA_FF=y CONFIG_HID_SMARTJOYPLUS=m CONFIG_SMARTJOYPLUS_FF=y CONFIG_HID_TIVO=m CONFIG_HID_TOPSEED=m # CONFIG_HID_TOPRE is not set CONFIG_HID_THINGM=m CONFIG_HID_THRUSTMASTER=m CONFIG_THRUSTMASTER_FF=y # CONFIG_HID_UDRAW_PS3 is not set # CONFIG_HID_U2FZERO is not set CONFIG_HID_WACOM=m CONFIG_HID_WIIMOTE=m CONFIG_HID_XINMO=m CONFIG_HID_ZEROPLUS=m CONFIG_ZEROPLUS_FF=y CONFIG_HID_ZYDACRON=m CONFIG_HID_SENSOR_HUB=m # CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set # CONFIG_HID_ALPS is not set # CONFIG_HID_MCP2221 is not set # end of Special HID drivers # # HID-BPF support # # end of HID-BPF support # # USB HID support # CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # end of USB HID Boot Protocol drivers # end of USB HID support # CONFIG_I2C_HID is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=m # CONFIG_USB_LED_TRIG is not set # CONFIG_USB_ULPI_BUS is not set # CONFIG_USB_CONN_GPIO is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=m CONFIG_USB_PCI=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_FEW_INIT_RETRIES is not set CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_PRODUCTLIST is not set # CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=m # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=m # CONFIG_USB_XHCI_DBGCAP is not set CONFIG_USB_XHCI_PCI=m # CONFIG_USB_XHCI_PCI_RENESAS is not set # CONFIG_USB_XHCI_PLATFORM is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=m # CONFIG_XPS_USB_HCD_XILINX is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=m # CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_HCD_PLATFORM is not set CONFIG_USB_UHCI_HCD=m CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_HCD_ISO is not set CONFIG_USB_SL811_CS=m # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_BCMA is not set # CONFIG_USB_HCD_SSB is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m CONFIG_USB_TMC=m # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_REALTEK=m CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_STORAGE_ENE_UB6250=m # CONFIG_USB_UAS is not set # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # CONFIG_USBIP_CORE is not set # # USB dual-mode controller drivers # # CONFIG_USB_CDNS_SUPPORT is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_DWC2 is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_AIRCABLE=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CH341=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_F81232=m # CONFIG_USB_SERIAL_F8153X is not set CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_IUU=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_METRO=m CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7715_PARPORT=y CONFIG_USB_SERIAL_MOS7840=m CONFIG_USB_SERIAL_MXUPORT=m CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_OTI6858=m CONFIG_USB_SERIAL_QCAUX=m CONFIG_USB_SERIAL_QUALCOMM=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_SERIAL_SAFE=m # CONFIG_USB_SERIAL_SAFE_PADDED is not set CONFIG_USB_SERIAL_SIERRAWIRELESS=m CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_SERIAL_OPTICON=m CONFIG_USB_SERIAL_XSENS_MT=m CONFIG_USB_SERIAL_WISHBONE=m CONFIG_USB_SERIAL_SSU100=m CONFIG_USB_SERIAL_QT2=m # CONFIG_USB_SERIAL_UPD78F0730 is not set # CONFIG_USB_SERIAL_XR is not set CONFIG_USB_SERIAL_DEBUG=m # # USB Miscellaneous drivers # # CONFIG_USB_USS720 is not set CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_APPLEDISPLAY=m # CONFIG_APPLE_MFI_FASTCHARGE is not set CONFIG_USB_SISUSBVGA=m CONFIG_USB_LD=m CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m CONFIG_USB_TEST=m CONFIG_USB_EHSET_TEST_FIXTURE=m CONFIG_USB_ISIGHTFW=m CONFIG_USB_YUREX=m CONFIG_USB_EZUSB_FX2=m # CONFIG_USB_HUB_USB251XB is not set # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set CONFIG_USB_CHAOSKEY=m # CONFIG_USB_ONBOARD_HUB is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # # USB Physical Layer drivers # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set # end of USB Physical Layer drivers # CONFIG_USB_GADGET is not set # CONFIG_TYPEC is not set # CONFIG_USB_ROLE_SWITCH is not set CONFIG_MMC=m CONFIG_PWRSEQ_EMMC=m # CONFIG_PWRSEQ_SD8787 is not set CONFIG_PWRSEQ_SIMPLE=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=256 CONFIG_SDIO_UART=m # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_DEBUG is not set CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y # CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_WBSD=m CONFIG_MMC_TIFM_SD=m # CONFIG_MMC_SPI is not set CONFIG_MMC_SDRICOH_CS=m CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m # CONFIG_MMC_USDHI6ROL0 is not set CONFIG_MMC_CQHCI=m # CONFIG_MMC_HSQ is not set # CONFIG_MMC_TOSHIBA_PCI is not set # CONFIG_MMC_MTK is not set CONFIG_SCSI_UFSHCD=m # CONFIG_SCSI_UFS_BSG is not set # CONFIG_SCSI_UFS_HPB is not set # CONFIG_SCSI_UFS_HWMON is not set CONFIG_SCSI_UFSHCD_PCI=m # CONFIG_SCSI_UFS_DWC_TC_PCI is not set # CONFIG_SCSI_UFSHCD_PLATFORM is not set CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set # # MemoryStick drivers # # CONFIG_MEMSTICK_UNSAFE_RESUME is not set CONFIG_MSPRO_BLOCK=m # CONFIG_MS_BLOCK is not set # # MemoryStick Host Controller Drivers # CONFIG_MEMSTICK_TIFM_MS=m CONFIG_MEMSTICK_JMICRON_38X=m CONFIG_MEMSTICK_R592=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # CONFIG_LEDS_CLASS_FLASH is not set # CONFIG_LEDS_CLASS_MULTICOLOR is not set # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set # # LED drivers # # CONFIG_LEDS_AN30259A is not set # CONFIG_LEDS_AW200XX is not set # CONFIG_LEDS_AW2013 is not set # CONFIG_LEDS_BCM6328 is not set # CONFIG_LEDS_BCM6358 is not set # CONFIG_LEDS_CR0014114 is not set # CONFIG_LEDS_EL15203000 is not set # CONFIG_LEDS_LM3530 is not set # CONFIG_LEDS_LM3532 is not set # CONFIG_LEDS_LM3642 is not set # CONFIG_LEDS_LM3692X is not set CONFIG_LEDS_PCA9532=m # CONFIG_LEDS_PCA9532_GPIO is not set # CONFIG_LEDS_GPIO is not set CONFIG_LEDS_LP3944=m # CONFIG_LEDS_LP3952 is not set # CONFIG_LEDS_LP50XX is not set # CONFIG_LEDS_LP55XX_COMMON is not set # CONFIG_LEDS_LP8860 is not set CONFIG_LEDS_PCA955X=m # CONFIG_LEDS_PCA955X_GPIO is not set # CONFIG_LEDS_PCA963X is not set CONFIG_LEDS_DAC124S085=m # CONFIG_LEDS_BD2606MVV is not set CONFIG_LEDS_BD2802=m # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_TLC591XX is not set # CONFIG_LEDS_LM355x is not set # CONFIG_LEDS_IS31FL319X is not set # CONFIG_LEDS_IS31FL32XX is not set # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # # CONFIG_LEDS_BLINKM is not set # CONFIG_LEDS_MLXREG is not set # CONFIG_LEDS_USER is not set # CONFIG_LEDS_SPI_BYTE is not set # CONFIG_LEDS_LM3697 is not set # # Flash and Torch LED drivers # # # RGB LED drivers # # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m # CONFIG_LEDS_TRIGGER_DISK is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_CPU=y # CONFIG_LEDS_TRIGGER_ACTIVITY is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_LEDS_TRIGGER_NETDEV is not set # CONFIG_LEDS_TRIGGER_PATTERN is not set CONFIG_LEDS_TRIGGER_AUDIO=m # CONFIG_LEDS_TRIGGER_TTY is not set # # Simple LED drivers # CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y # # Speakup console speech # CONFIG_SPEAKUP=m CONFIG_SPEAKUP_SYNTH_ACNTSA=m CONFIG_SPEAKUP_SYNTH_APOLLO=m CONFIG_SPEAKUP_SYNTH_AUDPTR=m CONFIG_SPEAKUP_SYNTH_BNS=m CONFIG_SPEAKUP_SYNTH_DECTLK=m CONFIG_SPEAKUP_SYNTH_DECEXT=m CONFIG_SPEAKUP_SYNTH_LTLK=m CONFIG_SPEAKUP_SYNTH_SOFT=m CONFIG_SPEAKUP_SYNTH_SPKOUT=m CONFIG_SPEAKUP_SYNTH_TXPRT=m CONFIG_SPEAKUP_SYNTH_DUMMY=m # end of Speakup console speech CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ON_DEMAND_PAGING=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y CONFIG_INFINIBAND_CXGB4=m CONFIG_MLX4_INFINIBAND=m CONFIG_MLX5_INFINIBAND=m CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_OCRDMA=m # CONFIG_INFINIBAND_VMWARE_PVRDMA is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_ISER=m CONFIG_INFINIBAND_ISERT=m # CONFIG_INFINIBAND_RTRS_CLIENT is not set # CONFIG_INFINIBAND_RTRS_SERVER is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_ABB5ZES3 is not set # CONFIG_RTC_DRV_ABEOZ9 is not set # CONFIG_RTC_DRV_ABX80X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_HYM8563 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_NCT3018Y is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_ISL12026 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF85063 is not set # CONFIG_RTC_DRV_PCF85363 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8010 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3028 is not set # CONFIG_RTC_DRV_RV3032 is not set # CONFIG_RTC_DRV_RV8803 is not set # CONFIG_RTC_DRV_SD3078 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1302 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6916 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RX4581 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_MCP795 is not set CONFIG_RTC_I2C_AND_SPI=y # # SPI and I2C RTC drivers # # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # CONFIG_RTC_DRV_RX6110 is not set # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=m # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1685_FAMILY is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_ZYNQMP is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_GENERIC=y # CONFIG_RTC_DRV_CADENCE is not set # CONFIG_RTC_DRV_FTRTC010 is not set # CONFIG_RTC_DRV_MPC5121 is not set # CONFIG_RTC_DRV_R7301 is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set # CONFIG_RTC_DRV_GOLDFISH is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y # CONFIG_ALTERA_MSGDMA is not set # CONFIG_DW_AXI_DMAC is not set # CONFIG_FSL_EDMA is not set # CONFIG_INTEL_IDMA64 is not set # CONFIG_PLX_DMA is not set # CONFIG_XILINX_XDMA is not set # CONFIG_XILINX_ZYNQMP_DPDMA is not set CONFIG_PPC_BESTCOMM=m CONFIG_PPC_BESTCOMM_ATA=m CONFIG_PPC_BESTCOMM_FEC=m # CONFIG_QCOM_HIDMA_MGMT is not set # CONFIG_QCOM_HIDMA is not set # CONFIG_DW_DMAC is not set # CONFIG_DW_DMAC_PCI is not set # CONFIG_DW_EDMA is not set # CONFIG_SF_PDMA is not set # # DMA Clients # # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # # DMABUF options # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set # CONFIG_DMABUF_MOVE_NOTIFY is not set # CONFIG_DMABUF_DEBUG is not set # CONFIG_DMABUF_SELFTESTS is not set # CONFIG_DMABUF_HEAPS is not set # CONFIG_DMABUF_SYSFS_STATS is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set # CONFIG_PANEL is not set CONFIG_UIO=m CONFIG_UIO_CIF=m # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_DMEM_GENIRQ is not set CONFIG_UIO_AEC=m CONFIG_UIO_SERCOS3=m CONFIG_UIO_PCI_GENERIC=m CONFIG_UIO_NETX=m # CONFIG_UIO_PRUSS is not set CONFIG_UIO_MF624=m # CONFIG_VFIO is not set CONFIG_VIRT_DRIVERS=y CONFIG_VIRTIO_ANCHOR=y CONFIG_VIRTIO=m CONFIG_VIRTIO_PCI_LIB=m CONFIG_VIRTIO_PCI_LIB_LEGACY=m CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_PCI_LEGACY=y CONFIG_VIRTIO_BALLOON=m # CONFIG_VIRTIO_INPUT is not set # CONFIG_VIRTIO_MMIO is not set # CONFIG_VDPA is not set CONFIG_VHOST_IOTLB=m CONFIG_VHOST_TASK=y CONFIG_VHOST=m CONFIG_VHOST_MENU=y CONFIG_VHOST_NET=m CONFIG_VHOST_SCSI=m # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set # # Microsoft Hyper-V guest support # # end of Microsoft Hyper-V guest support # CONFIG_GREYBUS is not set # CONFIG_COMEDI is not set CONFIG_STAGING=y # CONFIG_PRISM2_USB is not set # CONFIG_RTL8192U is not set # CONFIG_RTLLIB is not set # CONFIG_RTL8723BS is not set CONFIG_R8712U=m # CONFIG_RTS5208 is not set # CONFIG_VT6655 is not set # CONFIG_VT6656 is not set # # IIO staging drivers # # # Accelerometers # # CONFIG_ADIS16203 is not set # CONFIG_ADIS16240 is not set # end of Accelerometers # # Analog to digital converters # # CONFIG_AD7816 is not set # end of Analog to digital converters # # Analog digital bi-direction converters # # CONFIG_ADT7316 is not set # end of Analog digital bi-direction converters # # Direct Digital Synthesis # # CONFIG_AD9832 is not set # CONFIG_AD9834 is not set # end of Direct Digital Synthesis # # Network Analyzer, Impedance Converters # # CONFIG_AD5933 is not set # end of Network Analyzer, Impedance Converters # # Resolver to digital converters # # CONFIG_AD2S1210 is not set # end of Resolver to digital converters # end of IIO staging drivers # CONFIG_FB_SM750 is not set # CONFIG_STAGING_MEDIA is not set # CONFIG_STAGING_BOARD is not set # CONFIG_LTE_GDM724X is not set # CONFIG_FB_TFT is not set # CONFIG_KS7010 is not set # CONFIG_PI433 is not set # CONFIG_XIL_AXIS_FIFO is not set # CONFIG_FIELDBUS_DEV is not set CONFIG_QLGE=m # CONFIG_VME_BUS is not set # CONFIG_GOLDFISH is not set CONFIG_HAVE_CLK=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # CONFIG_LMK04832 is not set # CONFIG_COMMON_CLK_MAX9485 is not set # CONFIG_COMMON_CLK_SI5341 is not set # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_SI514 is not set # CONFIG_COMMON_CLK_SI544 is not set # CONFIG_COMMON_CLK_SI570 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_CDCE925 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set # CONFIG_COMMON_CLK_AXI_CLKGEN is not set # CONFIG_COMMON_CLK_RS9_PCIE is not set # CONFIG_COMMON_CLK_SI521XX is not set # CONFIG_COMMON_CLK_VC5 is not set # CONFIG_COMMON_CLK_VC7 is not set # CONFIG_COMMON_CLK_FIXED_MMIO is not set # CONFIG_XILINX_VCU is not set # CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # end of Clock Source drivers # CONFIG_MAILBOX is not set CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # # end of Generic IOMMU Pagetable Support # CONFIG_IOMMU_DEBUGFS is not set CONFIG_IOMMU_DEFAULT_DMA_STRICT=y # CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set CONFIG_OF_IOMMU=y # CONFIG_IOMMUFD is not set # # Remoteproc drivers # # CONFIG_REMOTEPROC is not set # end of Remoteproc drivers # # Rpmsg drivers # # CONFIG_RPMSG_VIRTIO is not set # end of Rpmsg drivers # CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # end of Amlogic SoC drivers # # Broadcom SoC drivers # # end of Broadcom SoC drivers # # NXP/Freescale QorIQ SoC drivers # # CONFIG_QUICC_ENGINE is not set # end of NXP/Freescale QorIQ SoC drivers # # fujitsu SoC drivers # # end of fujitsu SoC drivers # # i.MX SoC drivers # # end of i.MX SoC drivers # # Enable LiteX SoC Builder specific drivers # # CONFIG_LITEX_SOC_CONTROLLER is not set # end of Enable LiteX SoC Builder specific drivers # CONFIG_WPCM450_SOC is not set # # Qualcomm SoC drivers # # end of Qualcomm SoC drivers # CONFIG_SOC_TI is not set # # Xilinx SoC drivers # # end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # # CONFIG_PM_DEVFREQ_EVENT is not set # CONFIG_EXTCON is not set CONFIG_MEMORY=y CONFIG_IIO=m CONFIG_IIO_BUFFER=y # CONFIG_IIO_BUFFER_CB is not set # CONFIG_IIO_BUFFER_DMA is not set # CONFIG_IIO_BUFFER_DMAENGINE is not set # CONFIG_IIO_BUFFER_HW_CONSUMER is not set CONFIG_IIO_KFIFO_BUF=m CONFIG_IIO_TRIGGERED_BUFFER=m # CONFIG_IIO_CONFIGFS is not set CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_IIO_SW_DEVICE is not set # CONFIG_IIO_SW_TRIGGER is not set # CONFIG_IIO_TRIGGERED_EVENT is not set # # Accelerometers # # CONFIG_ADIS16201 is not set # CONFIG_ADIS16209 is not set # CONFIG_ADXL313_I2C is not set # CONFIG_ADXL313_SPI is not set # CONFIG_ADXL345_I2C is not set # CONFIG_ADXL345_SPI is not set # CONFIG_ADXL355_I2C is not set # CONFIG_ADXL355_SPI is not set # CONFIG_ADXL367_SPI is not set # CONFIG_ADXL367_I2C is not set # CONFIG_ADXL372_SPI is not set # CONFIG_ADXL372_I2C is not set # CONFIG_BMA180 is not set # CONFIG_BMA220 is not set # CONFIG_BMA400 is not set # CONFIG_BMC150_ACCEL is not set # CONFIG_BMI088_ACCEL is not set # CONFIG_DA280 is not set # CONFIG_DA311 is not set # CONFIG_DMARD06 is not set # CONFIG_DMARD09 is not set # CONFIG_DMARD10 is not set # CONFIG_FXLS8962AF_I2C is not set # CONFIG_FXLS8962AF_SPI is not set CONFIG_HID_SENSOR_ACCEL_3D=m # CONFIG_IIO_ST_ACCEL_3AXIS is not set # CONFIG_IIO_KX022A_SPI is not set # CONFIG_IIO_KX022A_I2C is not set # CONFIG_KXSD9 is not set # CONFIG_KXCJK1013 is not set # CONFIG_MC3230 is not set # CONFIG_MMA7455_I2C is not set # CONFIG_MMA7455_SPI is not set # CONFIG_MMA7660 is not set # CONFIG_MMA8452 is not set # CONFIG_MMA9551 is not set # CONFIG_MMA9553 is not set # CONFIG_MSA311 is not set # CONFIG_MXC4005 is not set # CONFIG_MXC6255 is not set # CONFIG_SCA3000 is not set # CONFIG_SCA3300 is not set # CONFIG_STK8312 is not set # CONFIG_STK8BA50 is not set # end of Accelerometers # # Analog to digital converters # # CONFIG_AD4130 is not set # CONFIG_AD7091R5 is not set # CONFIG_AD7124 is not set # CONFIG_AD7192 is not set # CONFIG_AD7266 is not set # CONFIG_AD7280 is not set # CONFIG_AD7291 is not set # CONFIG_AD7292 is not set # CONFIG_AD7298 is not set # CONFIG_AD7476 is not set # CONFIG_AD7606_IFACE_PARALLEL is not set # CONFIG_AD7606_IFACE_SPI is not set # CONFIG_AD7766 is not set # CONFIG_AD7768_1 is not set # CONFIG_AD7780 is not set # CONFIG_AD7791 is not set # CONFIG_AD7793 is not set # CONFIG_AD7887 is not set # CONFIG_AD7923 is not set # CONFIG_AD7949 is not set # CONFIG_AD799X is not set # CONFIG_ADI_AXI_ADC is not set # CONFIG_ENVELOPE_DETECTOR is not set # CONFIG_HI8435 is not set # CONFIG_HX711 is not set # CONFIG_INA2XX_ADC is not set # CONFIG_LTC2471 is not set # CONFIG_LTC2485 is not set # CONFIG_LTC2496 is not set # CONFIG_LTC2497 is not set # CONFIG_MAX1027 is not set # CONFIG_MAX11100 is not set # CONFIG_MAX1118 is not set # CONFIG_MAX11205 is not set # CONFIG_MAX11410 is not set # CONFIG_MAX1241 is not set # CONFIG_MAX1363 is not set # CONFIG_MAX9611 is not set # CONFIG_MCP320X is not set # CONFIG_MCP3422 is not set # CONFIG_MCP3911 is not set # CONFIG_NAU7802 is not set # CONFIG_RICHTEK_RTQ6056 is not set # CONFIG_SD_ADC_MODULATOR is not set # CONFIG_TI_ADC081C is not set # CONFIG_TI_ADC0832 is not set # CONFIG_TI_ADC084S021 is not set # CONFIG_TI_ADC12138 is not set # CONFIG_TI_ADC108S102 is not set # CONFIG_TI_ADC128S052 is not set # CONFIG_TI_ADC161S626 is not set # CONFIG_TI_ADS1015 is not set # CONFIG_TI_ADS7924 is not set # CONFIG_TI_ADS1100 is not set # CONFIG_TI_ADS7950 is not set # CONFIG_TI_ADS8344 is not set # CONFIG_TI_ADS8688 is not set # CONFIG_TI_ADS124S08 is not set # CONFIG_TI_ADS131E08 is not set # CONFIG_TI_LMP92064 is not set # CONFIG_TI_TLC4541 is not set # CONFIG_TI_TSC2046 is not set # CONFIG_VF610_ADC is not set CONFIG_VIPERBOARD_ADC=m # CONFIG_XILINX_XADC is not set # end of Analog to digital converters # # Analog to digital and digital to analog converters # # CONFIG_AD74115 is not set # CONFIG_AD74413R is not set # end of Analog to digital and digital to analog converters # # Analog Front Ends # # CONFIG_IIO_RESCALE is not set # end of Analog Front Ends # # Amplifiers # # CONFIG_AD8366 is not set # CONFIG_ADA4250 is not set # CONFIG_HMC425 is not set # end of Amplifiers # # Capacitance to digital converters # # CONFIG_AD7150 is not set # CONFIG_AD7746 is not set # end of Capacitance to digital converters # # Chemical Sensors # # CONFIG_ATLAS_PH_SENSOR is not set # CONFIG_ATLAS_EZO_SENSOR is not set # CONFIG_BME680 is not set # CONFIG_CCS811 is not set # CONFIG_IAQCORE is not set # CONFIG_SCD30_CORE is not set # CONFIG_SCD4X is not set # CONFIG_SENSIRION_SGP30 is not set # CONFIG_SENSIRION_SGP40 is not set # CONFIG_SPS30_I2C is not set # CONFIG_SENSEAIR_SUNRISE_CO2 is not set # CONFIG_VZ89X is not set # end of Chemical Sensors # # Hid Sensor IIO Common # CONFIG_HID_SENSOR_IIO_COMMON=m CONFIG_HID_SENSOR_IIO_TRIGGER=m # end of Hid Sensor IIO Common # # IIO SCMI Sensors # # end of IIO SCMI Sensors # # SSP Sensor Common # # CONFIG_IIO_SSP_SENSORHUB is not set # end of SSP Sensor Common # # Digital to analog converters # # CONFIG_AD3552R is not set # CONFIG_AD5064 is not set # CONFIG_AD5360 is not set # CONFIG_AD5380 is not set # CONFIG_AD5421 is not set # CONFIG_AD5446 is not set # CONFIG_AD5449 is not set # CONFIG_AD5592R is not set # CONFIG_AD5593R is not set # CONFIG_AD5504 is not set # CONFIG_AD5624R_SPI is not set # CONFIG_LTC2688 is not set # CONFIG_AD5686_SPI is not set # CONFIG_AD5696_I2C is not set # CONFIG_AD5755 is not set # CONFIG_AD5758 is not set # CONFIG_AD5761 is not set # CONFIG_AD5764 is not set # CONFIG_AD5766 is not set # CONFIG_AD5770R is not set # CONFIG_AD5791 is not set # CONFIG_AD7293 is not set # CONFIG_AD7303 is not set # CONFIG_AD8801 is not set # CONFIG_DPOT_DAC is not set # CONFIG_DS4424 is not set # CONFIG_LTC1660 is not set # CONFIG_LTC2632 is not set # CONFIG_M62332 is not set # CONFIG_MAX517 is not set # CONFIG_MAX5522 is not set # CONFIG_MAX5821 is not set # CONFIG_MCP4725 is not set # CONFIG_MCP4922 is not set # CONFIG_TI_DAC082S085 is not set # CONFIG_TI_DAC5571 is not set # CONFIG_TI_DAC7311 is not set # CONFIG_TI_DAC7612 is not set # CONFIG_VF610_DAC is not set # end of Digital to analog converters # # IIO dummy driver # # end of IIO dummy driver # # Filters # # end of Filters # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # # CONFIG_AD9523 is not set # end of Clock Generator/Distribution # # Phase-Locked Loop (PLL) frequency synthesizers # # CONFIG_ADF4350 is not set # CONFIG_ADF4371 is not set # CONFIG_ADF4377 is not set # CONFIG_ADMV1013 is not set # CONFIG_ADMV4420 is not set # CONFIG_ADRF6780 is not set # end of Phase-Locked Loop (PLL) frequency synthesizers # end of Frequency Synthesizers DDS/PLL # # Digital gyroscope sensors # # CONFIG_ADIS16080 is not set # CONFIG_ADIS16130 is not set # CONFIG_ADIS16136 is not set # CONFIG_ADIS16260 is not set # CONFIG_ADXRS290 is not set # CONFIG_ADXRS450 is not set # CONFIG_BMG160 is not set # CONFIG_FXAS21002C is not set CONFIG_HID_SENSOR_GYRO_3D=m # CONFIG_MPU3050_I2C is not set # CONFIG_IIO_ST_GYRO_3AXIS is not set # CONFIG_ITG3200 is not set # end of Digital gyroscope sensors # # Health Sensors # # # Heart Rate Monitors # # CONFIG_AFE4403 is not set # CONFIG_AFE4404 is not set # CONFIG_MAX30100 is not set # CONFIG_MAX30102 is not set # end of Heart Rate Monitors # end of Health Sensors # # Humidity sensors # # CONFIG_AM2315 is not set # CONFIG_DHT11 is not set # CONFIG_HDC100X is not set # CONFIG_HDC2010 is not set # CONFIG_HID_SENSOR_HUMIDITY is not set # CONFIG_HTS221 is not set # CONFIG_HTU21 is not set # CONFIG_SI7005 is not set # CONFIG_SI7020 is not set # end of Humidity sensors # # Inertial measurement units # # CONFIG_ADIS16400 is not set # CONFIG_ADIS16460 is not set # CONFIG_ADIS16475 is not set # CONFIG_ADIS16480 is not set # CONFIG_BMI160_I2C is not set # CONFIG_BMI160_SPI is not set # CONFIG_BOSCH_BNO055_I2C is not set # CONFIG_FXOS8700_I2C is not set # CONFIG_FXOS8700_SPI is not set # CONFIG_KMX61 is not set # CONFIG_INV_ICM42600_I2C is not set # CONFIG_INV_ICM42600_SPI is not set # CONFIG_INV_MPU6050_I2C is not set # CONFIG_INV_MPU6050_SPI is not set # CONFIG_IIO_ST_LSM6DSX is not set # CONFIG_IIO_ST_LSM9DS0 is not set # end of Inertial measurement units # # Light sensors # # CONFIG_ADJD_S311 is not set # CONFIG_ADUX1020 is not set # CONFIG_AL3010 is not set # CONFIG_AL3320A is not set # CONFIG_APDS9300 is not set # CONFIG_APDS9960 is not set # CONFIG_AS73211 is not set # CONFIG_BH1750 is not set # CONFIG_BH1780 is not set # CONFIG_CM32181 is not set # CONFIG_CM3232 is not set # CONFIG_CM3323 is not set # CONFIG_CM3605 is not set # CONFIG_CM36651 is not set # CONFIG_GP2AP002 is not set # CONFIG_GP2AP020A00F is not set # CONFIG_SENSORS_ISL29018 is not set # CONFIG_SENSORS_ISL29028 is not set # CONFIG_ISL29125 is not set CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m # CONFIG_JSA1212 is not set # CONFIG_ROHM_BU27008 is not set # CONFIG_ROHM_BU27034 is not set # CONFIG_RPR0521 is not set # CONFIG_LTR501 is not set # CONFIG_LTRF216A is not set # CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set # CONFIG_MAX44009 is not set # CONFIG_NOA1305 is not set # CONFIG_OPT3001 is not set # CONFIG_OPT4001 is not set # CONFIG_PA12203001 is not set # CONFIG_SI1133 is not set # CONFIG_SI1145 is not set # CONFIG_STK3310 is not set # CONFIG_ST_UVIS25 is not set # CONFIG_TCS3414 is not set # CONFIG_TCS3472 is not set # CONFIG_SENSORS_TSL2563 is not set # CONFIG_TSL2583 is not set # CONFIG_TSL2591 is not set # CONFIG_TSL2772 is not set # CONFIG_TSL4531 is not set # CONFIG_US5182D is not set # CONFIG_VCNL4000 is not set # CONFIG_VCNL4035 is not set # CONFIG_VEML6030 is not set # CONFIG_VEML6070 is not set # CONFIG_VL6180 is not set # CONFIG_ZOPT2201 is not set # end of Light sensors # # Magnetometer sensors # # CONFIG_AK8974 is not set # CONFIG_AK8975 is not set # CONFIG_AK09911 is not set # CONFIG_BMC150_MAGN_I2C is not set # CONFIG_BMC150_MAGN_SPI is not set # CONFIG_MAG3110 is not set CONFIG_HID_SENSOR_MAGNETOMETER_3D=m # CONFIG_MMC35240 is not set # CONFIG_IIO_ST_MAGN_3AXIS is not set # CONFIG_SENSORS_HMC5843_I2C is not set # CONFIG_SENSORS_HMC5843_SPI is not set # CONFIG_SENSORS_RM3100_I2C is not set # CONFIG_SENSORS_RM3100_SPI is not set # CONFIG_TI_TMAG5273 is not set # CONFIG_YAMAHA_YAS530 is not set # end of Magnetometer sensors # # Multiplexers # # CONFIG_IIO_MUX is not set # end of Multiplexers # # Inclinometer sensors # CONFIG_HID_SENSOR_INCLINOMETER_3D=m CONFIG_HID_SENSOR_DEVICE_ROTATION=m # end of Inclinometer sensors # # Triggers - standalone # # CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # end of Triggers - standalone # # Linear and angular position sensors # # CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set # end of Linear and angular position sensors # # Digital potentiometers # # CONFIG_AD5110 is not set # CONFIG_AD5272 is not set # CONFIG_DS1803 is not set # CONFIG_MAX5432 is not set # CONFIG_MAX5481 is not set # CONFIG_MAX5487 is not set # CONFIG_MCP4018 is not set # CONFIG_MCP4131 is not set # CONFIG_MCP4531 is not set # CONFIG_MCP41010 is not set # CONFIG_TPL0102 is not set # CONFIG_X9250 is not set # end of Digital potentiometers # # Digital potentiostats # # CONFIG_LMP91000 is not set # end of Digital potentiostats # # Pressure sensors # # CONFIG_ABP060MG is not set # CONFIG_BMP280 is not set # CONFIG_DLHL60D is not set # CONFIG_DPS310 is not set CONFIG_HID_SENSOR_PRESS=m # CONFIG_HP03 is not set # CONFIG_ICP10100 is not set # CONFIG_MPL115_I2C is not set # CONFIG_MPL115_SPI is not set # CONFIG_MPL3115 is not set # CONFIG_MPRLS0025PA is not set # CONFIG_MS5611 is not set # CONFIG_MS5637 is not set # CONFIG_IIO_ST_PRESS is not set # CONFIG_T5403 is not set # CONFIG_HP206C is not set # CONFIG_ZPA2326 is not set # end of Pressure sensors # # Lightning sensors # # CONFIG_AS3935 is not set # end of Lightning sensors # # Proximity and distance sensors # # CONFIG_ISL29501 is not set # CONFIG_LIDAR_LITE_V2 is not set # CONFIG_MB1232 is not set # CONFIG_PING is not set # CONFIG_RFD77402 is not set # CONFIG_SRF04 is not set # CONFIG_SX9310 is not set # CONFIG_SX9324 is not set # CONFIG_SX9360 is not set # CONFIG_SX9500 is not set # CONFIG_SRF08 is not set # CONFIG_VCNL3020 is not set # CONFIG_VL53L0X_I2C is not set # end of Proximity and distance sensors # # Resolver to digital converters # # CONFIG_AD2S90 is not set # CONFIG_AD2S1200 is not set # end of Resolver to digital converters # # Temperature sensors # # CONFIG_LTC2983 is not set # CONFIG_MAXIM_THERMOCOUPLE is not set # CONFIG_HID_SENSOR_TEMP is not set # CONFIG_MLX90614 is not set # CONFIG_MLX90632 is not set # CONFIG_TMP006 is not set # CONFIG_TMP007 is not set # CONFIG_TMP117 is not set # CONFIG_TSYS01 is not set # CONFIG_TSYS02D is not set # CONFIG_MAX30208 is not set # CONFIG_MAX31856 is not set # CONFIG_MAX31865 is not set # end of Temperature sensors # CONFIG_NTB is not set # CONFIG_PWM is not set # # IRQ chip support # CONFIG_IRQCHIP=y # CONFIG_AL_FIC is not set # CONFIG_XILINX_INTC is not set # end of IRQ chip support # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_PHY_CAN_TRANSCEIVER is not set # # PHY drivers for Broadcom platforms # # CONFIG_BCM_KONA_USB2_PHY is not set # end of PHY drivers for Broadcom platforms # CONFIG_PHY_CADENCE_TORRENT is not set # CONFIG_PHY_CADENCE_DPHY is not set # CONFIG_PHY_CADENCE_DPHY_RX is not set # CONFIG_PHY_CADENCE_SALVO is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_PHY_CPCAP_USB is not set # CONFIG_PHY_MAPPHONE_MDM6600 is not set # end of PHY Subsystem # CONFIG_POWERCAP is not set # CONFIG_MCB is not set # # Performance monitor support # # end of Performance monitor support CONFIG_RAS=y # CONFIG_USB4 is not set # # Android # # CONFIG_ANDROID_BINDER_IPC is not set # end of Android # CONFIG_DAX is not set CONFIG_NVMEM=y CONFIG_NVMEM_SYSFS=y # # Layout Types # # CONFIG_NVMEM_LAYOUT_SL28_VPD is not set # CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set # end of Layout Types # CONFIG_NVMEM_RMEM is not set # # HW tracing support # # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # end of HW tracing support # CONFIG_FPGA is not set # CONFIG_FSI is not set CONFIG_PM_OPP=y # CONFIG_SIOX is not set # CONFIG_SLIMBUS is not set # CONFIG_INTERCONNECT is not set # CONFIG_COUNTER is not set # CONFIG_MOST is not set # CONFIG_PECI is not set # CONFIG_HTE is not set # end of Device Drivers # # File systems # # CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_LEGACY_DIRECT_IO=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=m CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_XFS_FS=m CONFIG_XFS_SUPPORT_V4=y CONFIG_XFS_SUPPORT_ASCII_CI=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_XFS_ONLINE_SCRUB is not set # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set # CONFIG_BTRFS_FS_REF_VERIFY is not set CONFIG_NILFS2_FS=m CONFIG_F2FS_FS=m CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y CONFIG_F2FS_FS_SECURITY=y # CONFIG_F2FS_CHECK_FS is not set # CONFIG_F2FS_FAULT_INJECTION is not set # CONFIG_F2FS_FS_COMPRESSION is not set CONFIG_F2FS_IOSTAT=y # CONFIG_F2FS_UNFAIR_RWSEM is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y # CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set # CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y # CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=m CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_FUSE_FS=m CONFIG_CUSE=m # CONFIG_VIRTIO_FS is not set # CONFIG_OVERLAY_FS is not set # # Caches # CONFIG_NETFS_SUPPORT=m CONFIG_NETFS_STATS=y CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_DEBUG is not set CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_ERROR_INJECTION is not set # CONFIG_CACHEFILES_ONDEMAND is not set # end of Caches # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m # end of CD-ROM/DVD Filesystems # # DOS/FAT/EXFAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="utf8" # CONFIG_FAT_DEFAULT_UTF8 is not set # CONFIG_EXFAT_FS is not set CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # CONFIG_NTFS3_FS is not set # end of DOS/FAT/EXFAT/NT Filesystems # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_MEMFD_CREATE=y CONFIG_CONFIGFS_FS=m # end of Pseudo filesystems CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m CONFIG_ECRYPT_FS=m CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=m CONFIG_CRAMFS_BLOCKDEV=y CONFIG_SQUASHFS=m CONFIG_SQUASHFS_FILE_CACHE=y # CONFIG_SQUASHFS_FILE_DIRECT is not set CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE=y # CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set # CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y # CONFIG_SQUASHFS_LZ4 is not set CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_ZSTD is not set # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 CONFIG_VXFS_FS=m CONFIG_MINIX_FS=m CONFIG_OMFS_FS=m # CONFIG_HPFS_FS is not set CONFIG_QNX4FS_FS=m CONFIG_QNX6FS_FS=m # CONFIG_QNX6FS_DEBUG is not set CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_PSTORE is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set # CONFIG_EROFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m CONFIG_NFS_V3=m CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=m CONFIG_NFS_SWAP=y CONFIG_NFS_V4_1=y CONFIG_NFS_V4_2=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_PNFS_BLOCK=m CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_NFS_V4_SECURITY_LABEL=y CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DEBUG=y CONFIG_NFS_DISABLE_UDP_SUPPORT=y # CONFIG_NFS_V4_2_READ_PLUS is not set CONFIG_NFSD=m # CONFIG_NFSD_V2 is not set CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y # CONFIG_NFSD_BLOCKLAYOUT is not set # CONFIG_NFSD_SCSILAYOUT is not set # CONFIG_NFSD_FLEXFILELAYOUT is not set # CONFIG_NFSD_V4_2_INTER_SSC is not set # CONFIG_NFSD_V4_SECURITY_LABEL is not set CONFIG_GRACE_PERIOD=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_NFS_V4_2_SSC_HELPER=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_SUNRPC_SWAP=y CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_KRB5_CRYPTOSYSTEM=y # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_DES is not set CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set CONFIG_SUNRPC_DEBUG=y CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_CEPH_FS=m CONFIG_CEPH_FSCACHE=y CONFIG_CEPH_FS_POSIX_ACL=y # CONFIG_CEPH_FS_SECURITY_LABEL is not set CONFIG_CIFS=m CONFIG_CIFS_STATS2=y CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_DEBUG=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_DEBUG_DUMP_KEYS is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_SWN_UPCALL is not set # CONFIG_CIFS_SMB_DIRECT is not set CONFIG_CIFS_FSCACHE=y # CONFIG_SMB_SERVER is not set CONFIG_SMBFS=m CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set CONFIG_AFS_FSCACHE=y # CONFIG_AFS_DEBUG_CURSOR is not set CONFIG_9P_FS=m CONFIG_9P_FSCACHE=y CONFIG_9P_FS_POSIX_ACL=y CONFIG_9P_FS_SECURITY=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=m CONFIG_NLS_MAC_CYRILLIC=m CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=m CONFIG_NLS_MAC_INUIT=m CONFIG_NLS_MAC_ROMANIAN=m CONFIG_NLS_MAC_TURKISH=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # CONFIG_UNICODE is not set CONFIG_IO_WQ=y # end of File systems # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_REQUEST_CACHE is not set # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_TRUSTED_KEYS is not set # CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_INFINIBAND is not set CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_PATH=y CONFIG_LSM_MMAP_MIN_ADDR=32768 # CONFIG_HARDENED_USERCOPY is not set # CONFIG_FORTIFY_SOURCE is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y # CONFIG_SECURITY_SELINUX_BOOTPARAM is not set CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 # CONFIG_SECURITY_SMACK is not set CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 # CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" # CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set CONFIG_SECURITY_APPARMOR=y # CONFIG_SECURITY_APPARMOR_DEBUG is not set CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y # CONFIG_SECURITY_SAFESETID is not set # CONFIG_SECURITY_LOCKDOWN_LSM is not set # CONFIG_SECURITY_LANDLOCK is not set CONFIG_INTEGRITY=y # CONFIG_INTEGRITY_SIGNATURE is not set CONFIG_INTEGRITY_AUDIT=y # CONFIG_IMA is not set # CONFIG_EVM is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set # CONFIG_DEFAULT_SECURITY_APPARMOR is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,bpf" # # Kernel hardening options # # # Memory initialization # CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y # CONFIG_INIT_STACK_NONE is not set # CONFIG_INIT_STACK_ALL_PATTERN is not set CONFIG_INIT_STACK_ALL_ZERO=y # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y # CONFIG_ZERO_CALL_USED_REGS is not set # end of Memory initialization CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options # end of Security options CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_ASYNC_PQ=m CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_SIG2=y CONFIG_CRYPTO_SKCIPHER=m CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=m CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_KPP=m CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set # CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_NULL2=m # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m # end of Crypto core or helper # # Public-key cryptography # CONFIG_CRYPTO_RSA=y # CONFIG_CRYPTO_DH is not set CONFIG_CRYPTO_ECC=m CONFIG_CRYPTO_ECDH=m # CONFIG_CRYPTO_ECDSA is not set # CONFIG_CRYPTO_ECRDSA is not set # CONFIG_CRYPTO_SM2 is not set # CONFIG_CRYPTO_CURVE25519 is not set # end of Public-key cryptography # # Block ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_ARIA is not set CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m # CONFIG_CRYPTO_SM4_GENERIC is not set CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m # end of Block ciphers # # Length-preserving ciphers and modes # # CONFIG_CRYPTO_ADIANTUM is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_CHACHA20 is not set CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_CFB is not set CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_HCTR2 is not set # CONFIG_CRYPTO_KEYWRAP is not set CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_OFB is not set CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # end of Length-preserving ciphers and modes # # AEAD (authenticated encryption with associated data) ciphers # # CONFIG_CRYPTO_AEGIS128 is not set # CONFIG_CRYPTO_CHACHA20POLY1305 is not set CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_GENIV=m CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_ECHAINIV=m CONFIG_CRYPTO_ESSIV=m # end of AEAD (authenticated encryption with associated data) ciphers # # Hashes, digests, and MACs # CONFIG_CRYPTO_BLAKE2B=m CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_HMAC=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_POLY1305 is not set CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m # CONFIG_CRYPTO_SM3_GENERIC is not set # CONFIG_CRYPTO_STREEBOG is not set CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_XXHASH=m # end of Hashes, digests, and MACs # # CRCs (cyclic redundancy checks) # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRCT10DIF=m CONFIG_CRYPTO_CRC64_ROCKSOFT=m # end of CRCs (cyclic redundancy checks) # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_842 is not set CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m # CONFIG_CRYPTO_ZSTD is not set # end of Compression # # Random number generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_DRBG_MENU=m CONFIG_CRYPTO_DRBG_HMAC=y # CONFIG_CRYPTO_DRBG_HASH is not set # CONFIG_CRYPTO_DRBG_CTR is not set CONFIG_CRYPTO_DRBG=m CONFIG_CRYPTO_JITTERENTROPY=m # CONFIG_CRYPTO_JITTERENTROPY_TESTINTERFACE is not set # end of Random number generation # # Userspace interface # CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y # end of Userspace interface CONFIG_CRYPTO_HASH_INFO=y # # Accelerated Cryptographic Algorithms for CPU (powerpc) # # CONFIG_CRYPTO_MD5_PPC is not set CONFIG_CRYPTO_SHA1_PPC=m # end of Accelerated Cryptographic Algorithms for CPU (powerpc) CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y # CONFIG_CRYPTO_DEV_ATMEL_ECC is not set # CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set # CONFIG_CRYPTO_DEV_CHELSIO is not set # CONFIG_CRYPTO_DEV_VIRTIO is not set # CONFIG_CRYPTO_DEV_SAFEXCEL is not set # CONFIG_CRYPTO_DEV_CCREE is not set # CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set CONFIG_PKCS7_MESSAGE_PARSER=y # CONFIG_PKCS7_TEST_KEY is not set # CONFIG_SIGNED_PE_FILE_VERIFICATION is not set # CONFIG_FIPS_SIGNATURE_SELFTEST is not set # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set # end of Certificates for signature checking CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=m CONFIG_RAID6_PQ_BENCHMARK=y # CONFIG_PACKING is not set CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_CORDIC=m # CONFIG_PRIME_NUMBERS is not set CONFIG_RATIONAL=y CONFIG_GENERIC_PCI_IOMAP=y # # Crypto library routines # CONFIG_CRYPTO_LIB_UTILS=y CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_LIB_ARC4=m CONFIG_CRYPTO_LIB_GF128MUL=m CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y # CONFIG_CRYPTO_LIB_CHACHA is not set # CONFIG_CRYPTO_LIB_CURVE25519 is not set CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 # CONFIG_CRYPTO_LIB_POLY1305 is not set # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set CONFIG_CRYPTO_LIB_SHA1=y CONFIG_CRYPTO_LIB_SHA256=y # end of Crypto library routines CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC64_ROCKSOFT=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set CONFIG_CRC64=m # CONFIG_CRC4 is not set CONFIG_CRC7=m CONFIG_LIBCRC32C=m # CONFIG_CRC8 is not set CONFIG_XXHASH=y # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_COMPRESS=m CONFIG_LZ4HC_COMPRESS=m CONFIG_LZ4_DECOMPRESS=y CONFIG_ZSTD_COMMON=y CONFIG_ZSTD_COMPRESS=y CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set CONFIG_XZ_DEC_POWERPC=y # CONFIG_XZ_DEC_IA64 is not set # CONFIG_XZ_DEC_ARM is not set # CONFIG_XZ_DEC_ARMTHUMB is not set # CONFIG_XZ_DEC_SPARC is not set # CONFIG_XZ_DEC_MICROLZMA is not set CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_DECOMPRESS_ZSTD=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_BTREE=y CONFIG_INTERVAL_TREE=y CONFIG_XARRAY_MULTI=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_ARCH_DMA_DEFAULT_COHERENT=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_DMA_MAP_BENCHMARK is not set CONFIG_SGL_ALLOC=y CONFIG_CHECK_SIGNATURE=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_LRU_CACHE=m CONFIG_CLZ_TAB=y CONFIG_IRQ_POLL=y CONFIG_MPILIB=y CONFIG_DIMLIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_HAVE_GENERIC_VDSO=y CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_VDSO_TIME_NS=y CONFIG_FONT_SUPPORT=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_SG_POOL=y CONFIG_ARCH_HAS_PMEM_API=y CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y CONFIG_ARCH_STACKWALK=y CONFIG_STACKDEPOT=y CONFIG_SBITMAP=y # end of Library routines # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_TIME=y # CONFIG_PRINTK_CALLER is not set # CONFIG_STACKTRACE_BUILD_ID is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_DYNAMIC_DEBUG=y CONFIG_DYNAMIC_DEBUG_CORE=y CONFIG_SYMBOLIC_ERRNAME=y CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y # # Compile-time checks and compiler options # CONFIG_AS_HAS_NON_CONST_LEB128=y CONFIG_DEBUG_INFO_NONE=y # CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set # CONFIG_DEBUG_INFO_DWARF4 is not set # CONFIG_DEBUG_INFO_DWARF5 is not set CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_HEADERS_INSTALL is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set CONFIG_OBJTOOL=y # CONFIG_VMLINUX_MAP is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options # # Generic Kernel Debugging Instruments # CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" CONFIG_DEBUG_FS=y CONFIG_DEBUG_FS_ALLOW_ALL=y # CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set # CONFIG_DEBUG_FS_ALLOW_NONE is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KCSAN=y CONFIG_HAVE_KCSAN_COMPILER=y # CONFIG_KCSAN is not set # end of Generic Kernel Debugging Instruments # # Networking Debugging # # CONFIG_NET_DEV_REFCNT_TRACKER is not set # CONFIG_NET_NS_REFCNT_TRACKER is not set # CONFIG_DEBUG_NET is not set # end of Networking Debugging # # Memory Debugging # # CONFIG_PAGE_EXTENSION is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_PAGE_OWNER is not set # CONFIG_PAGE_POISONING is not set # CONFIG_DEBUG_PAGE_REF is not set CONFIG_GENERIC_PTDUMP=y # CONFIG_PTDUMP_DEBUGFS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SHRINKER_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_SCHED_STACK_END_CHECK is not set CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VM_PGTABLE is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_KMAP_LOCAL is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_HAVE_ARCH_KASAN=y CONFIG_HAVE_ARCH_KASAN_VMALLOC=y CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y # CONFIG_KASAN is not set CONFIG_HAVE_ARCH_KFENCE=y # CONFIG_KFENCE is not set # end of Memory Debugging # CONFIG_DEBUG_SHIRQ is not set # # Debug Oops, Lockups and Hangs # # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 # CONFIG_SOFTLOCKUP_DETECTOR is not set CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set # CONFIG_WQ_WATCHDOG is not set # CONFIG_WQ_CPU_INTENSIVE_REPORT is not set # CONFIG_TEST_LOCKUP is not set # end of Debug Oops, Lockups and Hangs # # Scheduler Debugging # CONFIG_SCHED_DEBUG=y CONFIG_SCHED_INFO=y # CONFIG_SCHEDSTATS is not set # end of Scheduler Debugging # CONFIG_DEBUG_TIMEKEEPING is not set # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set # CONFIG_WW_MUTEX_SELFTEST is not set # CONFIG_SCF_TORTURE_TEST is not set # end of Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_DEBUG_IRQFLAGS is not set CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set # # Debug kernel data structures # # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PLIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_DEBUG_MAPLE_TREE is not set # end of Debug kernel data structures # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_RCU_SCALE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_REF_SCALE_TEST is not set # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # end of RCU Debugging # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_CGROUP_REF is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_OBJTOOL_MCOUNT=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_BOOTTIME_TRACING is not set CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y # CONFIG_FUNCTION_PROFILER is not set CONFIG_STACK_TRACER=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_HWLAT_TRACER is not set # CONFIG_OSNOISE_TRACER is not set # CONFIG_TIMERLAT_TRACER is not set CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_BLK_DEV_IO_TRACE=y CONFIG_KPROBE_EVENTS=y # CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set CONFIG_UPROBE_EVENTS=y CONFIG_DYNAMIC_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_FTRACE_MCOUNT_RECORD=y CONFIG_FTRACE_MCOUNT_USE_OBJTOOL=y # CONFIG_SYNTH_EVENTS is not set # CONFIG_USER_EVENTS is not set # CONFIG_HIST_TRIGGERS is not set # CONFIG_TRACE_EVENT_INJECT is not set # CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set # CONFIG_FTRACE_RECORD_RECURSION is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set # CONFIG_KPROBE_EVENT_GEN_TEST is not set # CONFIG_RV is not set # CONFIG_SAMPLES is not set CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y # CONFIG_IO_STRICT_DEVMEM is not set # # powerpc Debugging # CONFIG_PPC_DISABLE_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set CONFIG_JUMP_LABEL_FEATURE_CHECKS=y # CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y CONFIG_XMON_DEFAULT_RO_MODE=y CONFIG_DEBUGGER=y # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set # end of powerpc Debugging # # Kernel Testing and Coverage # # CONFIG_KUNIT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FUNCTION_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set CONFIG_ARCH_HAS_KCOV=y CONFIG_CC_HAS_SANCOV_TRACE_PC=y # CONFIG_KCOV is not set CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_TEST_DHRY is not set # CONFIG_LKDTM is not set # CONFIG_TEST_MIN_HEAP is not set # CONFIG_TEST_DIV64 is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_TEST_REF_TRACKER is not set # CONFIG_RBTREE_TEST is not set # CONFIG_REED_SOLOMON_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_TEST_HEXDUMP is not set # CONFIG_STRING_SELFTEST is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_PRINTF is not set # CONFIG_TEST_SCANF is not set # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_UUID is not set # CONFIG_TEST_XARRAY is not set # CONFIG_TEST_MAPLE_TREE is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_TEST_IDA is not set # CONFIG_TEST_LKM is not set # CONFIG_TEST_BITOPS is not set # CONFIG_TEST_VMALLOC is not set # CONFIG_TEST_USER_COPY is not set # CONFIG_TEST_BPF is not set # CONFIG_TEST_BLACKHOLE_DEV is not set # CONFIG_FIND_BIT_BENCHMARK is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_SYSCTL is not set # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_STATIC_KEYS is not set # CONFIG_TEST_DYNAMIC_DEBUG is not set # CONFIG_TEST_KMOD is not set # CONFIG_TEST_MEMCAT_P is not set # CONFIG_TEST_MEMINIT is not set # CONFIG_TEST_FREE_PAGES is not set CONFIG_ARCH_USE_MEMTEST=y # CONFIG_MEMTEST is not set # end of Kernel Testing and Coverage # # Rust hacking # # end of Rust hacking # end of Kernel hacking ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-06 15:23 ` Liam R. Howlett @ 2023-09-06 17:23 ` Paul E. McKenney 2023-09-06 17:29 ` Liam R. Howlett 2023-09-06 19:06 ` Geert Uytterhoeven 1 sibling, 1 reply; 43+ messages in thread From: Paul E. McKenney @ 2023-09-06 17:23 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > (Adding Paul & Shanker to Cc list.. please see below for why) > > Apologies on the late response, I was away and have been struggling to > get a working PPC32 test environment. > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > Hi Liam, > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > The current implementation of append may cause duplicate data and/or > > > incorrect ranges to be returned to a reader during an update. Although > > > this has not been reported or seen, disable the append write operation > > > while the tree is in rcu mode out of an abundance of caution. > > ... > > > > > > Fixes: 54a611b60590 ("Maple Tree: add new data structure") > > > Cc: stable@vger.kernel.org > > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > > ("maple_tree: disable mas_wr_append() when other readers are > > possible") in v6.5, and is being backported to stable. > > > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > > following warning: > > > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > > /soc/timer@e803b000: used for clocksource > > /soc/timer@e803c000: used for clock events > > +------------[ cut here ]------------ > > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > > +Interrupts were enabled early > > Note that the maple tree is involved in tracking the interrupts, see > kernel/irq/irqdesc.c irq_insert_desc(), etc. > > > +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 > > I cannot find commit id 99b80d6b92b5. > > > +Hardware name: Generic R7S9210 (Flattened Device Tree) > > + unwind_backtrace from show_stack+0x10/0x14 > > + show_stack from dump_stack_lvl+0x24/0x3c > > + dump_stack_lvl from __warn+0x74/0xb8 > > + __warn from warn_slowpath_fmt+0x78/0xb0 > > + warn_slowpath_fmt from start_kernel+0x2f0/0x480 > > + start_kernel from 0x0 > > +---[ end trace 0000000000000000 ]--- > > Console: colour dummy device 80x30 > > printk: console [tty0] enabled > > Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000) > > > > Reverting this commit fixes the issue. > > I have set up testing with qemu for powerpc 32b, and reverting this > patch does not fix it for me. Did you revert the patch or bisect to the > issue? > > It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to > get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is > as follows: > > qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" > -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048 > -hda powerpc32.img -nographic -kernel <file> > > > > > > RCU-related configs: > > > > $ grep RCU .config > > # RCU Subsystem > > CONFIG_TINY_RCU=y > > # CONFIG_RCU_EXPERT is not set > > CONFIG_TINY_SRCU=y > > # end of RCU Subsystem > > # RCU Debugging > > # CONFIG_RCU_SCALE_TEST is not set > > # CONFIG_RCU_TORTURE_TEST is not set > > # CONFIG_RCU_REF_SCALE_TEST is not set > > # CONFIG_RCU_TRACE is not set > > # CONFIG_RCU_EQS_DEBUG is not set > > # end of RCU Debugging > > I used the configuration from debian 8 and ran 'make oldconfig' to build > my kernel. I have attached the configuration. > > > > > CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, > > as CONFIG_* is reserved for kernel configuration options). > > Thanks, I'll add it to my list of work. > > > > > I do not see this issue on any other platform > > (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > > RCU configuration. > > > > Do you have a clue? > > It appears to be something to do with struct maple_tree sparse_irqs. If > you drop the rcu flag from that maple tree, then my configuration boots > without the warning. > > I *think* this is because we will reuse a lot more nodes. And I *think* > the rcu flag is not needed, since there is a comment about reading the > tree being protected by the mutex sparse_irq_lock within the > kernel/irq/irqdesc.c file. Shanker, can you comment on that? > > I wonder if there is a limit to the number of RCU free events before > something is triggered to flush them out which could trigger IRQ > enabling? Paul, could this be the case? Are you asking if call_rcu() will re-enable interrupts in the following use case? local_irq_disable(); call_rcu(&p->rh, my_cb_func); local_irq_enable(); If so, the answer is "no" (and yes, there might be a bug, but then again I just double-checked). However, if interrupts are enabled across a call_rcu() invocation, it will do some additional work to encourage the grace period. Even if interrupts are disabled across a call_rcu() invocation, it will still do either a raise_softirq() or a wakeup, depending on configuration, to encourage the grace period. And in the case of call_rcu() from an interrupt handler, that raise_softirq() could result in the RCU_SOFTIRQ handler running upon return from that interrupt, and if there are a great many callbacks ready to invoke, this RCU_SOFTIRQ handler might take quite some time. Plus that handler could itself be interrupted. If long-running RCU_SOFTIRQ handlers are a problem, you can boot with rcutree.use_softirq=0, which puts that handler into a kthread, which in turn give the scheduler more control. However, this will also turn a lightweight raise_softirq() into a rather heavier weight wakeup. Choose wisely! ;-) Or am I missing your point? Thanx, Paul > Thanks, > Liam > > # > # Automatically generated file; DO NOT EDIT. > # Linux/powerpc 6.5.0-rc4 Kernel Configuration > # > CONFIG_CC_VERSION_TEXT="powerpc-linux-gnu-gcc (Debian 13.2.0-2) 13.2.0" > CONFIG_CC_IS_GCC=y > CONFIG_GCC_VERSION=130200 > CONFIG_CLANG_VERSION=0 > CONFIG_AS_IS_GNU=y > CONFIG_AS_VERSION=24100 > CONFIG_LD_IS_BFD=y > CONFIG_LD_VERSION=24100 > CONFIG_LLD_VERSION=0 > CONFIG_CC_CAN_LINK=y > CONFIG_CC_CAN_LINK_STATIC=y > CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y > CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y > CONFIG_CC_HAS_ASM_INLINE=y > CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y > CONFIG_PAHOLE_VERSION=124 > CONFIG_IRQ_WORK=y > CONFIG_BUILDTIME_TABLE_SORT=y > CONFIG_THREAD_INFO_IN_TASK=y > > # > # General setup > # > CONFIG_BROKEN_ON_SMP=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > # CONFIG_COMPILE_TEST is not set > # CONFIG_WERROR is not set > CONFIG_LOCALVERSION="" > # CONFIG_LOCALVERSION_AUTO is not set > CONFIG_BUILD_SALT="" > CONFIG_HAVE_KERNEL_GZIP=y > CONFIG_HAVE_KERNEL_XZ=y > CONFIG_KERNEL_GZIP=y > # CONFIG_KERNEL_XZ is not set > CONFIG_DEFAULT_INIT="" > CONFIG_DEFAULT_HOSTNAME="(none)" > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > CONFIG_POSIX_MQUEUE=y > CONFIG_POSIX_MQUEUE_SYSCTL=y > # CONFIG_WATCH_QUEUE is not set > CONFIG_CROSS_MEMORY_ATTACH=y > # CONFIG_USELIB is not set > CONFIG_AUDIT=y > CONFIG_HAVE_ARCH_AUDITSYSCALL=y > CONFIG_AUDITSYSCALL=y > > # > # IRQ subsystem > # > CONFIG_GENERIC_IRQ_SHOW=y > CONFIG_GENERIC_IRQ_SHOW_LEVEL=y > CONFIG_GENERIC_IRQ_INJECTION=y > CONFIG_IRQ_DOMAIN=y > CONFIG_IRQ_DOMAIN_HIERARCHY=y > CONFIG_GENERIC_MSI_IRQ=y > CONFIG_IRQ_FORCED_THREADING=y > CONFIG_SPARSE_IRQ=y > # CONFIG_GENERIC_IRQ_DEBUGFS is not set > # end of IRQ subsystem > > CONFIG_GENERIC_TIME_VSYSCALL=y > CONFIG_GENERIC_CLOCKEVENTS=y > CONFIG_GENERIC_CMOS_UPDATE=y > > # > # Timers subsystem > # > CONFIG_TICK_ONESHOT=y > CONFIG_NO_HZ_COMMON=y > # CONFIG_HZ_PERIODIC is not set > CONFIG_NO_HZ_IDLE=y > # CONFIG_NO_HZ is not set > CONFIG_HIGH_RES_TIMERS=y > # end of Timers subsystem > > CONFIG_BPF=y > CONFIG_HAVE_EBPF_JIT=y > CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y > > # > # BPF subsystem > # > # CONFIG_BPF_SYSCALL is not set > # CONFIG_BPF_JIT is not set > # end of BPF subsystem > > CONFIG_PREEMPT_VOLUNTARY_BUILD=y > # CONFIG_PREEMPT_NONE is not set > CONFIG_PREEMPT_VOLUNTARY=y > # CONFIG_PREEMPT is not set > > # > # CPU/Task time and stats accounting > # > CONFIG_TICK_CPU_ACCOUNTING=y > # CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set > # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set > # CONFIG_IRQ_TIME_ACCOUNTING is not set > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_BSD_PROCESS_ACCT_V3=y > CONFIG_TASKSTATS=y > CONFIG_TASK_DELAY_ACCT=y > CONFIG_TASK_XACCT=y > CONFIG_TASK_IO_ACCOUNTING=y > # CONFIG_PSI is not set > # end of CPU/Task time and stats accounting > > # > # RCU Subsystem > # > CONFIG_TINY_RCU=y > # CONFIG_RCU_EXPERT is not set > CONFIG_TINY_SRCU=y > CONFIG_TASKS_RCU_GENERIC=y > CONFIG_TASKS_RUDE_RCU=y > CONFIG_RCU_NEED_SEGCBLIST=y > # end of RCU Subsystem > > # CONFIG_IKCONFIG is not set > # CONFIG_IKHEADERS is not set > CONFIG_LOG_BUF_SHIFT=17 > # CONFIG_PRINTK_INDEX is not set > > # > # Scheduler features > # > # end of Scheduler features > > CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" > CONFIG_GCC11_NO_ARRAY_BOUNDS=y > CONFIG_CC_NO_ARRAY_BOUNDS=y > CONFIG_CGROUPS=y > CONFIG_PAGE_COUNTER=y > # CONFIG_CGROUP_FAVOR_DYNMODS is not set > CONFIG_MEMCG=y > CONFIG_MEMCG_KMEM=y > CONFIG_BLK_CGROUP=y > CONFIG_CGROUP_WRITEBACK=y > CONFIG_CGROUP_SCHED=y > CONFIG_FAIR_GROUP_SCHED=y > # CONFIG_CFS_BANDWIDTH is not set > # CONFIG_RT_GROUP_SCHED is not set > # CONFIG_CGROUP_PIDS is not set > # CONFIG_CGROUP_RDMA is not set > CONFIG_CGROUP_FREEZER=y > CONFIG_CGROUP_DEVICE=y > CONFIG_CGROUP_CPUACCT=y > CONFIG_CGROUP_PERF=y > # CONFIG_CGROUP_MISC is not set > # CONFIG_CGROUP_DEBUG is not set > CONFIG_SOCK_CGROUP_DATA=y > CONFIG_NAMESPACES=y > CONFIG_UTS_NS=y > CONFIG_TIME_NS=y > CONFIG_IPC_NS=y > CONFIG_USER_NS=y > CONFIG_PID_NS=y > CONFIG_NET_NS=y > CONFIG_CHECKPOINT_RESTORE=y > CONFIG_SCHED_AUTOGROUP=y > CONFIG_RELAY=y > CONFIG_BLK_DEV_INITRD=y > CONFIG_INITRAMFS_SOURCE="" > CONFIG_RD_GZIP=y > CONFIG_RD_BZIP2=y > CONFIG_RD_LZMA=y > CONFIG_RD_XZ=y > CONFIG_RD_LZO=y > CONFIG_RD_LZ4=y > CONFIG_RD_ZSTD=y > # CONFIG_BOOT_CONFIG is not set > CONFIG_INITRAMFS_PRESERVE_MTIME=y > CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y > # CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set > CONFIG_LD_ORPHAN_WARN=y > CONFIG_LD_ORPHAN_WARN_LEVEL="warn" > CONFIG_SYSCTL=y > CONFIG_SYSCTL_EXCEPTION_TRACE=y > CONFIG_HAVE_PCSPKR_PLATFORM=y > CONFIG_EXPERT=y > CONFIG_MULTIUSER=y > CONFIG_SGETMASK_SYSCALL=y > CONFIG_SYSFS_SYSCALL=y > CONFIG_FHANDLE=y > CONFIG_POSIX_TIMERS=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_PCSPKR_PLATFORM=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_FUTEX_PI=y > CONFIG_EPOLL=y > CONFIG_SIGNALFD=y > CONFIG_TIMERFD=y > CONFIG_EVENTFD=y > CONFIG_SHMEM=y > CONFIG_AIO=y > CONFIG_IO_URING=y > CONFIG_ADVISE_SYSCALLS=y > CONFIG_MEMBARRIER=y > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_SELFTEST is not set > # CONFIG_KALLSYMS_ALL is not set > CONFIG_KALLSYMS_BASE_RELATIVE=y > CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y > CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y > CONFIG_KCMP=y > CONFIG_RSEQ=y > CONFIG_CACHESTAT_SYSCALL=y > # CONFIG_DEBUG_RSEQ is not set > # CONFIG_EMBEDDED is not set > CONFIG_HAVE_PERF_EVENTS=y > # CONFIG_PC104 is not set > > # > # Kernel Performance Events And Counters > # > CONFIG_PERF_EVENTS=y > # end of Kernel Performance Events And Counters > > CONFIG_SYSTEM_DATA_VERIFICATION=y > CONFIG_PROFILING=y > CONFIG_TRACEPOINTS=y > # end of General setup > > CONFIG_PPC32=y > # CONFIG_PPC64 is not set > > # > # Processor support > # > CONFIG_PPC_BOOK3S_32=y > # CONFIG_PPC_85xx is not set > # CONFIG_PPC_8xx is not set > # CONFIG_40x is not set > # CONFIG_44x is not set > CONFIG_PPC_BOOK3S_603=y > CONFIG_PPC_BOOK3S_604=y > CONFIG_POWERPC_CPU=y > # CONFIG_E300C2_CPU is not set > # CONFIG_E300C3_CPU is not set > # CONFIG_G4_CPU is not set > # CONFIG_TOOLCHAIN_DEFAULT_CPU is not set > CONFIG_TARGET_CPU_BOOL=y > CONFIG_TARGET_CPU="powerpc" > CONFIG_PPC_BOOK3S=y > CONFIG_PPC_FPU_REGS=y > CONFIG_PPC_FPU=y > CONFIG_ALTIVEC=y > CONFIG_PPC_KUEP=y > CONFIG_PPC_KUAP=y > # CONFIG_PPC_KUAP_DEBUG is not set > CONFIG_PPC_HAVE_PMU_SUPPORT=y > # CONFIG_PMU_SYSFS is not set > CONFIG_PPC_PERF_CTRS=y > # CONFIG_SMP is not set > CONFIG_NR_CPUS=1 > # end of Processor support > > CONFIG_VDSO32=y > CONFIG_CPU_BIG_ENDIAN=y > CONFIG_32BIT=y > CONFIG_MMU=y > CONFIG_ARCH_MMAP_RND_BITS_MAX=17 > CONFIG_ARCH_MMAP_RND_BITS_MIN=11 > CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 > CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 > CONFIG_NR_IRQS=512 > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_LOCKDEP_SUPPORT=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_PPC=y > CONFIG_EARLY_PRINTK=y > CONFIG_PANIC_TIMEOUT=0 > CONFIG_SCHED_OMIT_FRAME_POINTER=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > CONFIG_PPC_UDBG_16550=y > CONFIG_AUDIT_ARCH=y > CONFIG_GENERIC_BUG=y > CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y > CONFIG_ARCH_HIBERNATION_POSSIBLE=y > CONFIG_ARCH_SUSPEND_POSSIBLE=y > CONFIG_ARCH_HAS_ADD_PAGES=y > # CONFIG_PPC_PCI_OF_BUS_MAP is not set > CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y > CONFIG_ARCH_SUPPORTS_UPROBES=y > CONFIG_PGTABLE_LEVELS=2 > CONFIG_PPC_MSI_BITMAP=y > > # > # Platform support > # > # CONFIG_SCOM_DEBUGFS is not set > CONFIG_PPC_CHRP=y > # CONFIG_PPC_MPC512x is not set > CONFIG_PPC_MPC52xx=y > # CONFIG_PPC_MPC5200_SIMPLE is not set > CONFIG_PPC_EFIKA=y > # CONFIG_PPC_LITE5200 is not set > # CONFIG_PPC_MEDIA5200 is not set > CONFIG_PPC_MPC5200_BUGFIX=y > CONFIG_PPC_PMAC=y > # CONFIG_PPC_82xx is not set > # CONFIG_PPC_83xx is not set > # CONFIG_PPC_86xx is not set > # CONFIG_EMBEDDED6xx is not set > # CONFIG_AMIGAONE is not set > CONFIG_KVM_GUEST=y > CONFIG_EPAPR_PARAVIRT=y > CONFIG_PPC_HASH_MMU_NATIVE=y > CONFIG_PPC_OF_BOOT_TRAMPOLINE=y > # CONFIG_UDBG_RTAS_CONSOLE is not set > CONFIG_MPIC=y > # CONFIG_MPIC_MSGR is not set > CONFIG_PPC_I8259=y > CONFIG_PPC_RTAS=y > CONFIG_RTAS_ERROR_LOGGING=y > CONFIG_PPC_RTAS_DAEMON=y > CONFIG_RTAS_PROC=y > CONFIG_PPC_MPC106=y > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_GOV_ATTR_SET=y > CONFIG_CPU_FREQ_GOV_COMMON=y > # CONFIG_CPU_FREQ_STAT is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > CONFIG_CPU_FREQ_GOV_USERSPACE=m > CONFIG_CPU_FREQ_GOV_ONDEMAND=m > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m > > # > # CPU frequency scaling drivers > # > # CONFIG_CPUFREQ_DT is not set > # CONFIG_CPUFREQ_DT_PLATDEV is not set > CONFIG_CPU_FREQ_PMAC=y > # end of CPU Frequency scaling > > # > # CPUIdle driver > # > > # > # CPU Idle > # > # CONFIG_CPU_IDLE is not set > # end of CPU Idle > # end of CPUIdle driver > > CONFIG_TAU=y > # CONFIG_TAU_INT is not set > # CONFIG_TAU_AVERAGE is not set > # CONFIG_GEN_RTC is not set > # end of Platform support > > # > # Kernel options > # > CONFIG_HIGHMEM=y > # CONFIG_HZ_100 is not set > CONFIG_HZ_250=y > # CONFIG_HZ_300 is not set > # CONFIG_HZ_1000 is not set > CONFIG_HZ=250 > CONFIG_SCHED_HRTICK=y > CONFIG_KEXEC=y > # CONFIG_CRASH_DUMP is not set > CONFIG_ARCH_FLATMEM_ENABLE=y > CONFIG_ILLEGAL_POINTER_VALUE=0 > CONFIG_PPC_4K_PAGES=y > CONFIG_PAGE_SIZE_4KB=y > CONFIG_PPC_PAGE_SHIFT=12 > CONFIG_THREAD_SHIFT=13 > CONFIG_DATA_SHIFT=12 > CONFIG_ARCH_FORCE_MAX_ORDER=10 > CONFIG_CMDLINE="console=ttyS0,9600 console=tty0" > CONFIG_CMDLINE_FROM_BOOTLOADER=y > # CONFIG_CMDLINE_EXTEND is not set > # CONFIG_CMDLINE_FORCE is not set > CONFIG_EXTRA_TARGETS="" > CONFIG_ARCH_WANTS_FREEZER_CONTROL=y > CONFIG_SUSPEND=y > CONFIG_SUSPEND_FREEZER=y > # CONFIG_SUSPEND_SKIP_SYNC is not set > CONFIG_HIBERNATE_CALLBACKS=y > CONFIG_HIBERNATION=y > CONFIG_HIBERNATION_SNAPSHOT_DEV=y > CONFIG_PM_STD_PARTITION="" > CONFIG_PM_SLEEP=y > # CONFIG_PM_AUTOSLEEP is not set > # CONFIG_PM_USERSPACE_AUTOSLEEP is not set > # CONFIG_PM_WAKELOCKS is not set > CONFIG_PM=y > CONFIG_PM_DEBUG=y > CONFIG_PM_ADVANCED_DEBUG=y > # CONFIG_PM_TEST_SUSPEND is not set > CONFIG_PM_SLEEP_DEBUG=y > CONFIG_PM_CLK=y > # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set > # end of Kernel options > > CONFIG_ISA_DMA_API=y > > # > # Bus options > # > # CONFIG_ISA is not set > CONFIG_GENERIC_ISA_DMA=y > CONFIG_PPC_INDIRECT_PCI=y > # CONFIG_FSL_LBC is not set > # end of Bus options > > # > # Advanced setup > # > # CONFIG_ADVANCED_OPTIONS is not set > > # > # Default settings for advanced configuration options are used > # > CONFIG_LOWMEM_SIZE=0x30000000 > CONFIG_PAGE_OFFSET=0xc0000000 > CONFIG_KERNEL_START=0xc0000000 > CONFIG_PHYSICAL_START=0x00000000 > CONFIG_TASK_SIZE=0xb0000000 > # end of Advanced setup > > CONFIG_PPC_LIB_RHEAP=y > CONFIG_VIRTUALIZATION=y > # CONFIG_KVM_BOOK3S_32 is not set > CONFIG_HAVE_LIVEPATCH=y > > # > # General architecture-dependent options > # > CONFIG_CRASH_CORE=y > CONFIG_KEXEC_CORE=y > CONFIG_KPROBES=y > CONFIG_JUMP_LABEL=y > # CONFIG_STATIC_KEYS_SELFTEST is not set > # CONFIG_STATIC_CALL_SELFTEST is not set > CONFIG_OPTPROBES=y > CONFIG_KPROBES_ON_FTRACE=y > CONFIG_UPROBES=y > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y > CONFIG_ARCH_USE_BUILTIN_BSWAP=y > CONFIG_KRETPROBES=y > CONFIG_HAVE_IOREMAP_PROT=y > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_HAVE_OPTPROBES=y > CONFIG_HAVE_KPROBES_ON_FTRACE=y > CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y > CONFIG_HAVE_NMI=y > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > CONFIG_HAVE_ARCH_TRACEHOOK=y > CONFIG_GENERIC_SMP_IDLE_THREAD=y > CONFIG_ARCH_HAS_FORTIFY_SOURCE=y > CONFIG_ARCH_HAS_SET_MEMORY=y > CONFIG_ARCH_32BIT_OFF_T=y > CONFIG_HAVE_ASM_MODVERSIONS=y > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y > CONFIG_HAVE_RSEQ=y > CONFIG_HAVE_HW_BREAKPOINT=y > CONFIG_HAVE_PERF_REGS=y > CONFIG_HAVE_PERF_USER_STACK_DUMP=y > CONFIG_HAVE_ARCH_JUMP_LABEL=y > CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y > CONFIG_MMU_GATHER_TABLE_FREE=y > CONFIG_MMU_GATHER_RCU_TABLE_FREE=y > CONFIG_MMU_GATHER_PAGE_SIZE=y > CONFIG_MMU_GATHER_MERGE_VMAS=y > CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y > CONFIG_MMU_LAZY_TLB_REFCOUNT=y > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y > CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y > CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y > CONFIG_HAVE_ARCH_SECCOMP=y > CONFIG_HAVE_ARCH_SECCOMP_FILTER=y > CONFIG_SECCOMP=y > CONFIG_SECCOMP_FILTER=y > # CONFIG_SECCOMP_CACHE_DEBUG is not set > CONFIG_HAVE_STACKPROTECTOR=y > CONFIG_STACKPROTECTOR=y > CONFIG_STACKPROTECTOR_STRONG=y > CONFIG_LTO_NONE=y > CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y > CONFIG_HAVE_CONTEXT_TRACKING_USER=y > CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y > CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y > CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y > CONFIG_HAVE_MOD_ARCH_SPECIFIC=y > CONFIG_MODULES_USE_ELF_RELA=y > CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y > CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y > CONFIG_SOFTIRQ_ON_OWN_STACK=y > CONFIG_ARCH_HAS_ELF_RANDOMIZE=y > CONFIG_HAVE_ARCH_MMAP_RND_BITS=y > CONFIG_ARCH_MMAP_RND_BITS=11 > CONFIG_PAGE_SIZE_LESS_THAN_64KB=y > CONFIG_PAGE_SIZE_LESS_THAN_256KB=y > CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y > CONFIG_HAVE_OBJTOOL=y > CONFIG_HAVE_RELIABLE_STACKTRACE=y > CONFIG_HAVE_ARCH_NVRAM_OPS=y > CONFIG_CLONE_BACKWARDS=y > CONFIG_OLD_SIGSUSPEND=y > CONFIG_OLD_SIGACTION=y > CONFIG_COMPAT_32BIT_TIME=y > CONFIG_HAVE_ARCH_VMAP_STACK=y > CONFIG_VMAP_STACK=y > CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y > CONFIG_RANDOMIZE_KSTACK_OFFSET=y > # CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set > CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y > CONFIG_ARCH_HAS_PHYS_TO_DMA=y > # CONFIG_LOCK_EVENT_COUNTS is not set > CONFIG_HAVE_STATIC_CALL=y > CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y > CONFIG_ARCH_SPLIT_ARG64=y > > # > # GCOV-based kernel profiling > # > # CONFIG_GCOV_KERNEL is not set > CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y > # end of GCOV-based kernel profiling > > CONFIG_HAVE_GCC_PLUGINS=y > CONFIG_FUNCTION_ALIGNMENT=0 > # end of General architecture-dependent options > > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > # CONFIG_MODULE_DEBUG is not set > CONFIG_MODULE_FORCE_LOAD=y > CONFIG_MODULE_UNLOAD=y > CONFIG_MODULE_FORCE_UNLOAD=y > # CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set > CONFIG_MODVERSIONS=y > CONFIG_ASM_MODVERSIONS=y > # CONFIG_MODULE_SRCVERSION_ALL is not set > # CONFIG_MODULE_SIG is not set > CONFIG_MODULE_COMPRESS_NONE=y > # CONFIG_MODULE_COMPRESS_GZIP is not set > # CONFIG_MODULE_COMPRESS_XZ is not set > # CONFIG_MODULE_COMPRESS_ZSTD is not set > # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set > CONFIG_MODPROBE_PATH="/sbin/modprobe" > # CONFIG_TRIM_UNUSED_KSYMS is not set > CONFIG_MODULES_TREE_LOOKUP=y > CONFIG_BLOCK=y > CONFIG_BLOCK_LEGACY_AUTOLOAD=y > CONFIG_BLK_CGROUP_RWSTAT=y > CONFIG_BLK_CGROUP_PUNT_BIO=y > CONFIG_BLK_DEV_BSG_COMMON=y > CONFIG_BLK_ICQ=y > CONFIG_BLK_DEV_BSGLIB=y > CONFIG_BLK_DEV_INTEGRITY=y > CONFIG_BLK_DEV_INTEGRITY_T10=m > # CONFIG_BLK_DEV_ZONED is not set > CONFIG_BLK_DEV_THROTTLING=y > # CONFIG_BLK_DEV_THROTTLING_LOW is not set > # CONFIG_BLK_WBT is not set > # CONFIG_BLK_CGROUP_IOLATENCY is not set > # CONFIG_BLK_CGROUP_IOCOST is not set > # CONFIG_BLK_CGROUP_IOPRIO is not set > CONFIG_BLK_DEBUG_FS=y > # CONFIG_BLK_SED_OPAL is not set > # CONFIG_BLK_INLINE_ENCRYPTION is not set > > # > # Partition Types > # > CONFIG_PARTITION_ADVANCED=y > # CONFIG_ACORN_PARTITION is not set > # CONFIG_AIX_PARTITION is not set > # CONFIG_OSF_PARTITION is not set > CONFIG_AMIGA_PARTITION=y > # CONFIG_ATARI_PARTITION is not set > CONFIG_MAC_PARTITION=y > CONFIG_MSDOS_PARTITION=y > # CONFIG_BSD_DISKLABEL is not set > # CONFIG_MINIX_SUBPARTITION is not set > # CONFIG_SOLARIS_X86_PARTITION is not set > # CONFIG_UNIXWARE_DISKLABEL is not set > # CONFIG_LDM_PARTITION is not set > # CONFIG_SGI_PARTITION is not set > # CONFIG_ULTRIX_PARTITION is not set > # CONFIG_SUN_PARTITION is not set > CONFIG_KARMA_PARTITION=y > CONFIG_EFI_PARTITION=y > # CONFIG_SYSV68_PARTITION is not set > # CONFIG_CMDLINE_PARTITION is not set > # end of Partition Types > > CONFIG_BLK_MQ_PCI=y > CONFIG_BLK_MQ_VIRTIO=y > CONFIG_BLK_PM=y > CONFIG_BLOCK_HOLDER_DEPRECATED=y > CONFIG_BLK_MQ_STACKING=y > > # > # IO Schedulers > # > CONFIG_MQ_IOSCHED_DEADLINE=y > CONFIG_MQ_IOSCHED_KYBER=y > CONFIG_IOSCHED_BFQ=m > CONFIG_BFQ_GROUP_IOSCHED=y > # CONFIG_BFQ_CGROUP_DEBUG is not set > # end of IO Schedulers > > CONFIG_ASN1=y > CONFIG_INLINE_SPIN_UNLOCK_IRQ=y > CONFIG_INLINE_READ_UNLOCK=y > CONFIG_INLINE_READ_UNLOCK_IRQ=y > CONFIG_INLINE_WRITE_UNLOCK=y > CONFIG_INLINE_WRITE_UNLOCK_IRQ=y > CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y > CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y > CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y > CONFIG_FREEZER=y > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > CONFIG_ELFCORE=y > CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y > CONFIG_BINFMT_SCRIPT=y > CONFIG_BINFMT_MISC=m > CONFIG_COREDUMP=y > # end of Executable file formats > > # > # Memory Management options > # > CONFIG_ZPOOL=y > CONFIG_SWAP=y > CONFIG_ZSWAP=y > # CONFIG_ZSWAP_DEFAULT_ON is not set > # CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set > CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set > CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" > CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y > # CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set > # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set > CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" > CONFIG_ZBUD=y > # CONFIG_Z3FOLD is not set > CONFIG_ZSMALLOC=y > # CONFIG_ZSMALLOC_STAT is not set > CONFIG_ZSMALLOC_CHAIN_SIZE=8 > > # > # SLAB allocator options > # > # CONFIG_SLAB_DEPRECATED is not set > CONFIG_SLUB=y > # CONFIG_SLUB_TINY is not set > CONFIG_SLAB_MERGE_DEFAULT=y > # CONFIG_SLAB_FREELIST_RANDOM is not set > # CONFIG_SLAB_FREELIST_HARDENED is not set > # CONFIG_SLUB_STATS is not set > # end of SLAB allocator options > > # CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set > # CONFIG_COMPAT_BRK is not set > CONFIG_FLATMEM=y > CONFIG_HAVE_FAST_GUP=y > CONFIG_ARCH_KEEP_MEMBLOCK=y > CONFIG_EXCLUSIVE_SYSTEM_RAM=y > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > CONFIG_MEMORY_BALLOON=y > CONFIG_BALLOON_COMPACTION=y > CONFIG_COMPACTION=y > CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 > CONFIG_PAGE_REPORTING=y > CONFIG_MIGRATION=y > CONFIG_BOUNCE=y > CONFIG_MMU_NOTIFIER=y > CONFIG_KSM=y > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 > CONFIG_NEED_PER_CPU_KM=y > CONFIG_FRONTSWAP=y > # CONFIG_CMA is not set > CONFIG_GENERIC_EARLY_IOREMAP=y > # CONFIG_IDLE_PAGE_TRACKING is not set > CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y > CONFIG_ZONE_DMA=y > CONFIG_HMM_MIRROR=y > CONFIG_VM_EVENT_COUNTERS=y > # CONFIG_PERCPU_STATS is not set > # CONFIG_GUP_TEST is not set > # CONFIG_DMAPOOL_TEST is not set > CONFIG_ARCH_HAS_PTE_SPECIAL=y > CONFIG_KMAP_LOCAL=y > # CONFIG_ANON_VMA_NAME is not set > # CONFIG_USERFAULTFD is not set > # CONFIG_LRU_GEN is not set > CONFIG_LOCK_MM_AND_FIND_VMA=y > > # > # Data Access Monitoring > # > # CONFIG_DAMON is not set > # end of Data Access Monitoring > # end of Memory Management options > > CONFIG_NET=y > CONFIG_NET_INGRESS=y > CONFIG_NET_EGRESS=y > CONFIG_NET_REDIRECT=y > CONFIG_SKB_EXTENSIONS=y > > # > # Networking options > # > CONFIG_PACKET=y > CONFIG_PACKET_DIAG=m > CONFIG_UNIX=y > CONFIG_UNIX_SCM=y > CONFIG_AF_UNIX_OOB=y > CONFIG_UNIX_DIAG=m > # CONFIG_TLS is not set > CONFIG_XFRM=y > CONFIG_XFRM_ALGO=m > CONFIG_XFRM_USER=m > # CONFIG_XFRM_INTERFACE is not set > CONFIG_XFRM_SUB_POLICY=y > CONFIG_XFRM_MIGRATE=y > # CONFIG_XFRM_STATISTICS is not set > CONFIG_XFRM_AH=m > CONFIG_XFRM_ESP=m > CONFIG_XFRM_IPCOMP=m > CONFIG_NET_KEY=m > CONFIG_NET_KEY_MIGRATE=y > # CONFIG_SMC is not set > CONFIG_NET_HANDSHAKE=y > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > CONFIG_IP_ADVANCED_ROUTER=y > CONFIG_IP_FIB_TRIE_STATS=y > CONFIG_IP_MULTIPLE_TABLES=y > CONFIG_IP_ROUTE_MULTIPATH=y > CONFIG_IP_ROUTE_VERBOSE=y > CONFIG_IP_ROUTE_CLASSID=y > # CONFIG_IP_PNP is not set > CONFIG_NET_IPIP=m > CONFIG_NET_IPGRE_DEMUX=m > CONFIG_NET_IP_TUNNEL=m > CONFIG_NET_IPGRE=m > CONFIG_NET_IPGRE_BROADCAST=y > CONFIG_IP_MROUTE_COMMON=y > CONFIG_IP_MROUTE=y > CONFIG_IP_MROUTE_MULTIPLE_TABLES=y > CONFIG_IP_PIMSM_V1=y > CONFIG_IP_PIMSM_V2=y > CONFIG_SYN_COOKIES=y > CONFIG_NET_IPVTI=m > CONFIG_NET_UDP_TUNNEL=m > # CONFIG_NET_FOU is not set > # CONFIG_NET_FOU_IP_TUNNELS is not set > CONFIG_INET_AH=m > CONFIG_INET_ESP=m > # CONFIG_INET_ESP_OFFLOAD is not set > # CONFIG_INET_ESPINTCP is not set > CONFIG_INET_IPCOMP=m > CONFIG_INET_TABLE_PERTURB_ORDER=16 > CONFIG_INET_XFRM_TUNNEL=m > CONFIG_INET_TUNNEL=m > CONFIG_INET_DIAG=m > CONFIG_INET_TCP_DIAG=m > CONFIG_INET_UDP_DIAG=m > # CONFIG_INET_RAW_DIAG is not set > # CONFIG_INET_DIAG_DESTROY is not set > CONFIG_TCP_CONG_ADVANCED=y > CONFIG_TCP_CONG_BIC=m > CONFIG_TCP_CONG_CUBIC=y > CONFIG_TCP_CONG_WESTWOOD=m > CONFIG_TCP_CONG_HTCP=m > CONFIG_TCP_CONG_HSTCP=m > CONFIG_TCP_CONG_HYBLA=m > CONFIG_TCP_CONG_VEGAS=m > # CONFIG_TCP_CONG_NV is not set > CONFIG_TCP_CONG_SCALABLE=m > CONFIG_TCP_CONG_LP=m > CONFIG_TCP_CONG_VENO=m > CONFIG_TCP_CONG_YEAH=m > CONFIG_TCP_CONG_ILLINOIS=m > # CONFIG_TCP_CONG_DCTCP is not set > # CONFIG_TCP_CONG_CDG is not set > # CONFIG_TCP_CONG_BBR is not set > CONFIG_DEFAULT_CUBIC=y > # CONFIG_DEFAULT_RENO is not set > CONFIG_DEFAULT_TCP_CONG="cubic" > CONFIG_TCP_MD5SIG=y > CONFIG_IPV6=y > CONFIG_IPV6_ROUTER_PREF=y > CONFIG_IPV6_ROUTE_INFO=y > CONFIG_IPV6_OPTIMISTIC_DAD=y > CONFIG_INET6_AH=m > CONFIG_INET6_ESP=m > # CONFIG_INET6_ESP_OFFLOAD is not set > # CONFIG_INET6_ESPINTCP is not set > CONFIG_INET6_IPCOMP=m > CONFIG_IPV6_MIP6=y > # CONFIG_IPV6_ILA is not set > CONFIG_INET6_XFRM_TUNNEL=m > CONFIG_INET6_TUNNEL=m > CONFIG_IPV6_VTI=m > CONFIG_IPV6_SIT=m > CONFIG_IPV6_SIT_6RD=y > CONFIG_IPV6_NDISC_NODETYPE=y > CONFIG_IPV6_TUNNEL=m > CONFIG_IPV6_GRE=m > CONFIG_IPV6_MULTIPLE_TABLES=y > CONFIG_IPV6_SUBTREES=y > CONFIG_IPV6_MROUTE=y > CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y > CONFIG_IPV6_PIMSM_V2=y > # CONFIG_IPV6_SEG6_LWTUNNEL is not set > # CONFIG_IPV6_SEG6_HMAC is not set > # CONFIG_IPV6_RPL_LWTUNNEL is not set > # CONFIG_IPV6_IOAM6_LWTUNNEL is not set > # CONFIG_NETLABEL is not set > # CONFIG_MPTCP is not set > CONFIG_NETWORK_SECMARK=y > CONFIG_NET_PTP_CLASSIFY=y > # CONFIG_NETWORK_PHY_TIMESTAMPING is not set > CONFIG_NETFILTER=y > CONFIG_NETFILTER_ADVANCED=y > CONFIG_BRIDGE_NETFILTER=m > > # > # Core Netfilter Configuration > # > CONFIG_NETFILTER_INGRESS=y > CONFIG_NETFILTER_EGRESS=y > CONFIG_NETFILTER_SKIP_EGRESS=y > CONFIG_NETFILTER_NETLINK=m > CONFIG_NETFILTER_FAMILY_BRIDGE=y > CONFIG_NETFILTER_FAMILY_ARP=y > # CONFIG_NETFILTER_NETLINK_HOOK is not set > CONFIG_NETFILTER_NETLINK_ACCT=m > CONFIG_NETFILTER_NETLINK_QUEUE=m > CONFIG_NETFILTER_NETLINK_LOG=m > CONFIG_NETFILTER_NETLINK_OSF=m > CONFIG_NF_CONNTRACK=m > CONFIG_NF_LOG_SYSLOG=m > CONFIG_NETFILTER_CONNCOUNT=m > CONFIG_NF_CONNTRACK_MARK=y > CONFIG_NF_CONNTRACK_SECMARK=y > CONFIG_NF_CONNTRACK_ZONES=y > CONFIG_NF_CONNTRACK_PROCFS=y > CONFIG_NF_CONNTRACK_EVENTS=y > CONFIG_NF_CONNTRACK_TIMEOUT=y > CONFIG_NF_CONNTRACK_TIMESTAMP=y > CONFIG_NF_CONNTRACK_LABELS=y > CONFIG_NF_CONNTRACK_OVS=y > CONFIG_NF_CT_PROTO_DCCP=y > CONFIG_NF_CT_PROTO_GRE=y > CONFIG_NF_CT_PROTO_SCTP=y > CONFIG_NF_CT_PROTO_UDPLITE=y > CONFIG_NF_CONNTRACK_AMANDA=m > CONFIG_NF_CONNTRACK_FTP=m > CONFIG_NF_CONNTRACK_H323=m > CONFIG_NF_CONNTRACK_IRC=m > CONFIG_NF_CONNTRACK_BROADCAST=m > CONFIG_NF_CONNTRACK_NETBIOS_NS=m > CONFIG_NF_CONNTRACK_SNMP=m > CONFIG_NF_CONNTRACK_PPTP=m > CONFIG_NF_CONNTRACK_SANE=m > CONFIG_NF_CONNTRACK_SIP=m > CONFIG_NF_CONNTRACK_TFTP=m > CONFIG_NF_CT_NETLINK=m > CONFIG_NF_CT_NETLINK_TIMEOUT=m > # CONFIG_NETFILTER_NETLINK_GLUE_CT is not set > CONFIG_NF_NAT=m > CONFIG_NF_NAT_AMANDA=m > CONFIG_NF_NAT_FTP=m > CONFIG_NF_NAT_IRC=m > CONFIG_NF_NAT_SIP=m > CONFIG_NF_NAT_TFTP=m > CONFIG_NF_NAT_REDIRECT=y > CONFIG_NF_NAT_OVS=y > CONFIG_NETFILTER_SYNPROXY=m > CONFIG_NF_TABLES=m > # CONFIG_NF_TABLES_INET is not set > # CONFIG_NF_TABLES_NETDEV is not set > # CONFIG_NFT_NUMGEN is not set > CONFIG_NFT_CT=m > # CONFIG_NFT_CONNLIMIT is not set > CONFIG_NFT_LOG=m > CONFIG_NFT_LIMIT=m > # CONFIG_NFT_MASQ is not set > # CONFIG_NFT_REDIR is not set > # CONFIG_NFT_TUNNEL is not set > CONFIG_NFT_QUEUE=m > # CONFIG_NFT_QUOTA is not set > CONFIG_NFT_REJECT=m > CONFIG_NFT_COMPAT=m > CONFIG_NFT_HASH=m > # CONFIG_NFT_XFRM is not set > # CONFIG_NFT_SOCKET is not set > # CONFIG_NFT_OSF is not set > # CONFIG_NFT_TPROXY is not set > # CONFIG_NFT_SYNPROXY is not set > # CONFIG_NF_FLOW_TABLE is not set > CONFIG_NETFILTER_XTABLES=m > > # > # Xtables combined modules > # > CONFIG_NETFILTER_XT_MARK=m > CONFIG_NETFILTER_XT_CONNMARK=m > CONFIG_NETFILTER_XT_SET=m > > # > # Xtables targets > # > CONFIG_NETFILTER_XT_TARGET_AUDIT=m > CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m > CONFIG_NETFILTER_XT_TARGET_CONNMARK=m > CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m > CONFIG_NETFILTER_XT_TARGET_CT=m > CONFIG_NETFILTER_XT_TARGET_DSCP=m > CONFIG_NETFILTER_XT_TARGET_HL=m > CONFIG_NETFILTER_XT_TARGET_HMARK=m > CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m > CONFIG_NETFILTER_XT_TARGET_LED=m > CONFIG_NETFILTER_XT_TARGET_LOG=m > CONFIG_NETFILTER_XT_TARGET_MARK=m > # CONFIG_NETFILTER_XT_NAT is not set > CONFIG_NETFILTER_XT_TARGET_NETMAP=m > CONFIG_NETFILTER_XT_TARGET_NFLOG=m > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m > # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set > CONFIG_NETFILTER_XT_TARGET_RATEEST=m > CONFIG_NETFILTER_XT_TARGET_REDIRECT=m > # CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set > CONFIG_NETFILTER_XT_TARGET_TEE=m > CONFIG_NETFILTER_XT_TARGET_TPROXY=m > CONFIG_NETFILTER_XT_TARGET_TRACE=m > CONFIG_NETFILTER_XT_TARGET_SECMARK=m > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m > CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m > > # > # Xtables matches > # > CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m > CONFIG_NETFILTER_XT_MATCH_BPF=m > CONFIG_NETFILTER_XT_MATCH_CGROUP=m > CONFIG_NETFILTER_XT_MATCH_CLUSTER=m > CONFIG_NETFILTER_XT_MATCH_COMMENT=m > CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m > CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m > CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m > CONFIG_NETFILTER_XT_MATCH_CONNMARK=m > CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m > CONFIG_NETFILTER_XT_MATCH_CPU=m > CONFIG_NETFILTER_XT_MATCH_DCCP=m > CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m > CONFIG_NETFILTER_XT_MATCH_DSCP=m > CONFIG_NETFILTER_XT_MATCH_ECN=m > CONFIG_NETFILTER_XT_MATCH_ESP=m > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m > CONFIG_NETFILTER_XT_MATCH_HELPER=m > CONFIG_NETFILTER_XT_MATCH_HL=m > CONFIG_NETFILTER_XT_MATCH_IPCOMP=m > CONFIG_NETFILTER_XT_MATCH_IPRANGE=m > CONFIG_NETFILTER_XT_MATCH_IPVS=m > CONFIG_NETFILTER_XT_MATCH_L2TP=m > CONFIG_NETFILTER_XT_MATCH_LENGTH=m > CONFIG_NETFILTER_XT_MATCH_LIMIT=m > CONFIG_NETFILTER_XT_MATCH_MAC=m > CONFIG_NETFILTER_XT_MATCH_MARK=m > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m > CONFIG_NETFILTER_XT_MATCH_NFACCT=m > CONFIG_NETFILTER_XT_MATCH_OSF=m > CONFIG_NETFILTER_XT_MATCH_OWNER=m > CONFIG_NETFILTER_XT_MATCH_POLICY=m > CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m > CONFIG_NETFILTER_XT_MATCH_QUOTA=m > CONFIG_NETFILTER_XT_MATCH_RATEEST=m > CONFIG_NETFILTER_XT_MATCH_REALM=m > CONFIG_NETFILTER_XT_MATCH_RECENT=m > CONFIG_NETFILTER_XT_MATCH_SCTP=m > CONFIG_NETFILTER_XT_MATCH_SOCKET=m > CONFIG_NETFILTER_XT_MATCH_STATE=m > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m > CONFIG_NETFILTER_XT_MATCH_STRING=m > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m > CONFIG_NETFILTER_XT_MATCH_TIME=m > CONFIG_NETFILTER_XT_MATCH_U32=m > # end of Core Netfilter Configuration > > CONFIG_IP_SET=m > CONFIG_IP_SET_MAX=256 > CONFIG_IP_SET_BITMAP_IP=m > CONFIG_IP_SET_BITMAP_IPMAC=m > CONFIG_IP_SET_BITMAP_PORT=m > CONFIG_IP_SET_HASH_IP=m > CONFIG_IP_SET_HASH_IPMARK=m > CONFIG_IP_SET_HASH_IPPORT=m > CONFIG_IP_SET_HASH_IPPORTIP=m > CONFIG_IP_SET_HASH_IPPORTNET=m > # CONFIG_IP_SET_HASH_IPMAC is not set > # CONFIG_IP_SET_HASH_MAC is not set > CONFIG_IP_SET_HASH_NETPORTNET=m > CONFIG_IP_SET_HASH_NET=m > CONFIG_IP_SET_HASH_NETNET=m > CONFIG_IP_SET_HASH_NETPORT=m > CONFIG_IP_SET_HASH_NETIFACE=m > CONFIG_IP_SET_LIST_SET=m > CONFIG_IP_VS=m > CONFIG_IP_VS_IPV6=y > # CONFIG_IP_VS_DEBUG is not set > CONFIG_IP_VS_TAB_BITS=12 > > # > # IPVS transport protocol load balancing support > # > CONFIG_IP_VS_PROTO_TCP=y > CONFIG_IP_VS_PROTO_UDP=y > CONFIG_IP_VS_PROTO_AH_ESP=y > CONFIG_IP_VS_PROTO_ESP=y > CONFIG_IP_VS_PROTO_AH=y > CONFIG_IP_VS_PROTO_SCTP=y > > # > # IPVS scheduler > # > CONFIG_IP_VS_RR=m > CONFIG_IP_VS_WRR=m > CONFIG_IP_VS_LC=m > CONFIG_IP_VS_WLC=m > # CONFIG_IP_VS_FO is not set > # CONFIG_IP_VS_OVF is not set > CONFIG_IP_VS_LBLC=m > CONFIG_IP_VS_LBLCR=m > CONFIG_IP_VS_DH=m > CONFIG_IP_VS_SH=m > # CONFIG_IP_VS_MH is not set > CONFIG_IP_VS_SED=m > CONFIG_IP_VS_NQ=m > # CONFIG_IP_VS_TWOS is not set > > # > # IPVS SH scheduler > # > CONFIG_IP_VS_SH_TAB_BITS=8 > > # > # IPVS MH scheduler > # > CONFIG_IP_VS_MH_TAB_INDEX=12 > > # > # IPVS application helper > # > CONFIG_IP_VS_FTP=m > CONFIG_IP_VS_NFCT=y > CONFIG_IP_VS_PE_SIP=m > > # > # IP: Netfilter Configuration > # > CONFIG_NF_DEFRAG_IPV4=m > CONFIG_NF_SOCKET_IPV4=m > CONFIG_NF_TPROXY_IPV4=m > # CONFIG_NF_TABLES_IPV4 is not set > # CONFIG_NF_TABLES_ARP is not set > CONFIG_NF_DUP_IPV4=m > # CONFIG_NF_LOG_ARP is not set > # CONFIG_NF_LOG_IPV4 is not set > CONFIG_NF_REJECT_IPV4=m > CONFIG_NF_NAT_SNMP_BASIC=m > CONFIG_NF_NAT_PPTP=m > CONFIG_NF_NAT_H323=m > CONFIG_IP_NF_IPTABLES=m > CONFIG_IP_NF_MATCH_AH=m > CONFIG_IP_NF_MATCH_ECN=m > CONFIG_IP_NF_MATCH_RPFILTER=m > CONFIG_IP_NF_MATCH_TTL=m > CONFIG_IP_NF_FILTER=m > CONFIG_IP_NF_TARGET_REJECT=m > CONFIG_IP_NF_TARGET_SYNPROXY=m > # CONFIG_IP_NF_NAT is not set > CONFIG_IP_NF_MANGLE=m > CONFIG_IP_NF_TARGET_ECN=m > CONFIG_IP_NF_TARGET_TTL=m > CONFIG_IP_NF_RAW=m > CONFIG_IP_NF_SECURITY=m > CONFIG_IP_NF_ARPTABLES=m > CONFIG_IP_NF_ARPFILTER=m > CONFIG_IP_NF_ARP_MANGLE=m > # end of IP: Netfilter Configuration > > # > # IPv6: Netfilter Configuration > # > CONFIG_NF_SOCKET_IPV6=m > CONFIG_NF_TPROXY_IPV6=m > # CONFIG_NF_TABLES_IPV6 is not set > CONFIG_NF_DUP_IPV6=m > CONFIG_NF_REJECT_IPV6=m > CONFIG_NF_LOG_IPV6=m > CONFIG_IP6_NF_IPTABLES=m > CONFIG_IP6_NF_MATCH_AH=m > CONFIG_IP6_NF_MATCH_EUI64=m > CONFIG_IP6_NF_MATCH_FRAG=m > CONFIG_IP6_NF_MATCH_OPTS=m > CONFIG_IP6_NF_MATCH_HL=m > CONFIG_IP6_NF_MATCH_IPV6HEADER=m > CONFIG_IP6_NF_MATCH_MH=m > CONFIG_IP6_NF_MATCH_RPFILTER=m > CONFIG_IP6_NF_MATCH_RT=m > # CONFIG_IP6_NF_MATCH_SRH is not set > CONFIG_IP6_NF_TARGET_HL=m > CONFIG_IP6_NF_FILTER=m > CONFIG_IP6_NF_TARGET_REJECT=m > CONFIG_IP6_NF_TARGET_SYNPROXY=m > CONFIG_IP6_NF_MANGLE=m > CONFIG_IP6_NF_RAW=m > CONFIG_IP6_NF_SECURITY=m > # CONFIG_IP6_NF_NAT is not set > # end of IPv6: Netfilter Configuration > > CONFIG_NF_DEFRAG_IPV6=m > CONFIG_NF_TABLES_BRIDGE=m > CONFIG_NFT_BRIDGE_META=m > # CONFIG_NFT_BRIDGE_REJECT is not set > # CONFIG_NF_CONNTRACK_BRIDGE is not set > CONFIG_BRIDGE_NF_EBTABLES=m > CONFIG_BRIDGE_EBT_BROUTE=m > CONFIG_BRIDGE_EBT_T_FILTER=m > CONFIG_BRIDGE_EBT_T_NAT=m > CONFIG_BRIDGE_EBT_802_3=m > CONFIG_BRIDGE_EBT_AMONG=m > CONFIG_BRIDGE_EBT_ARP=m > CONFIG_BRIDGE_EBT_IP=m > CONFIG_BRIDGE_EBT_IP6=m > CONFIG_BRIDGE_EBT_LIMIT=m > CONFIG_BRIDGE_EBT_MARK=m > CONFIG_BRIDGE_EBT_PKTTYPE=m > CONFIG_BRIDGE_EBT_STP=m > CONFIG_BRIDGE_EBT_VLAN=m > CONFIG_BRIDGE_EBT_ARPREPLY=m > CONFIG_BRIDGE_EBT_DNAT=m > CONFIG_BRIDGE_EBT_MARK_T=m > CONFIG_BRIDGE_EBT_REDIRECT=m > CONFIG_BRIDGE_EBT_SNAT=m > CONFIG_BRIDGE_EBT_LOG=m > CONFIG_BRIDGE_EBT_NFLOG=m > # CONFIG_BPFILTER is not set > CONFIG_IP_DCCP=m > CONFIG_INET_DCCP_DIAG=m > > # > # DCCP CCIDs Configuration > # > # CONFIG_IP_DCCP_CCID2_DEBUG is not set > CONFIG_IP_DCCP_CCID3=y > # CONFIG_IP_DCCP_CCID3_DEBUG is not set > CONFIG_IP_DCCP_TFRC_LIB=y > # end of DCCP CCIDs Configuration > > # > # DCCP Kernel Hacking > # > # CONFIG_IP_DCCP_DEBUG is not set > # end of DCCP Kernel Hacking > > CONFIG_IP_SCTP=m > # CONFIG_SCTP_DBG_OBJCNT is not set > CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y > # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set > # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set > CONFIG_SCTP_COOKIE_HMAC_MD5=y > CONFIG_SCTP_COOKIE_HMAC_SHA1=y > CONFIG_INET_SCTP_DIAG=m > CONFIG_RDS=m > CONFIG_RDS_RDMA=m > CONFIG_RDS_TCP=m > # CONFIG_RDS_DEBUG is not set > CONFIG_TIPC=m > CONFIG_TIPC_MEDIA_IB=y > CONFIG_TIPC_MEDIA_UDP=y > CONFIG_TIPC_CRYPTO=y > CONFIG_TIPC_DIAG=m > CONFIG_ATM=m > CONFIG_ATM_CLIP=m > # CONFIG_ATM_CLIP_NO_ICMP is not set > CONFIG_ATM_LANE=m > CONFIG_ATM_MPOA=m > CONFIG_ATM_BR2684=m > # CONFIG_ATM_BR2684_IPFILTER is not set > CONFIG_L2TP=m > CONFIG_L2TP_DEBUGFS=m > CONFIG_L2TP_V3=y > CONFIG_L2TP_IP=m > CONFIG_L2TP_ETH=m > CONFIG_STP=m > CONFIG_GARP=m > CONFIG_MRP=m > CONFIG_BRIDGE=m > CONFIG_BRIDGE_IGMP_SNOOPING=y > CONFIG_BRIDGE_VLAN_FILTERING=y > # CONFIG_BRIDGE_MRP is not set > # CONFIG_BRIDGE_CFM is not set > # CONFIG_NET_DSA is not set > CONFIG_VLAN_8021Q=m > CONFIG_VLAN_8021Q_GVRP=y > CONFIG_VLAN_8021Q_MVRP=y > CONFIG_LLC=m > CONFIG_LLC2=m > CONFIG_ATALK=m > CONFIG_DEV_APPLETALK=m > CONFIG_IPDDP=m > CONFIG_IPDDP_ENCAP=y > # CONFIG_X25 is not set > CONFIG_LAPB=m > CONFIG_PHONET=m > # CONFIG_6LOWPAN is not set > CONFIG_IEEE802154=m > # CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set > CONFIG_IEEE802154_SOCKET=m > # CONFIG_MAC802154 is not set > CONFIG_NET_SCHED=y > > # > # Queueing/Scheduling > # > CONFIG_NET_SCH_HTB=m > CONFIG_NET_SCH_HFSC=m > CONFIG_NET_SCH_PRIO=m > CONFIG_NET_SCH_MULTIQ=m > CONFIG_NET_SCH_RED=m > CONFIG_NET_SCH_SFB=m > CONFIG_NET_SCH_SFQ=m > CONFIG_NET_SCH_TEQL=m > CONFIG_NET_SCH_TBF=m > # CONFIG_NET_SCH_CBS is not set > # CONFIG_NET_SCH_ETF is not set > CONFIG_NET_SCH_MQPRIO_LIB=m > # CONFIG_NET_SCH_TAPRIO is not set > CONFIG_NET_SCH_GRED=m > CONFIG_NET_SCH_NETEM=m > CONFIG_NET_SCH_DRR=m > CONFIG_NET_SCH_MQPRIO=m > # CONFIG_NET_SCH_SKBPRIO is not set > CONFIG_NET_SCH_CHOKE=m > CONFIG_NET_SCH_QFQ=m > CONFIG_NET_SCH_CODEL=m > CONFIG_NET_SCH_FQ_CODEL=m > # CONFIG_NET_SCH_CAKE is not set > CONFIG_NET_SCH_FQ=m > CONFIG_NET_SCH_HHF=m > CONFIG_NET_SCH_PIE=m > # CONFIG_NET_SCH_FQ_PIE is not set > CONFIG_NET_SCH_INGRESS=m > CONFIG_NET_SCH_PLUG=m > # CONFIG_NET_SCH_ETS is not set > # CONFIG_NET_SCH_DEFAULT is not set > > # > # Classification > # > CONFIG_NET_CLS=y > CONFIG_NET_CLS_BASIC=m > CONFIG_NET_CLS_ROUTE4=m > CONFIG_NET_CLS_FW=m > CONFIG_NET_CLS_U32=m > CONFIG_CLS_U32_PERF=y > CONFIG_CLS_U32_MARK=y > CONFIG_NET_CLS_FLOW=m > CONFIG_NET_CLS_CGROUP=m > CONFIG_NET_CLS_BPF=m > # CONFIG_NET_CLS_FLOWER is not set > # CONFIG_NET_CLS_MATCHALL is not set > CONFIG_NET_EMATCH=y > CONFIG_NET_EMATCH_STACK=32 > CONFIG_NET_EMATCH_CMP=m > CONFIG_NET_EMATCH_NBYTE=m > CONFIG_NET_EMATCH_U32=m > CONFIG_NET_EMATCH_META=m > CONFIG_NET_EMATCH_TEXT=m > CONFIG_NET_EMATCH_CANID=m > CONFIG_NET_EMATCH_IPSET=m > # CONFIG_NET_EMATCH_IPT is not set > CONFIG_NET_CLS_ACT=y > CONFIG_NET_ACT_POLICE=m > CONFIG_NET_ACT_GACT=m > CONFIG_GACT_PROB=y > CONFIG_NET_ACT_MIRRED=m > # CONFIG_NET_ACT_SAMPLE is not set > CONFIG_NET_ACT_IPT=m > CONFIG_NET_ACT_NAT=m > CONFIG_NET_ACT_PEDIT=m > CONFIG_NET_ACT_SIMP=m > CONFIG_NET_ACT_SKBEDIT=m > CONFIG_NET_ACT_CSUM=m > # CONFIG_NET_ACT_MPLS is not set > # CONFIG_NET_ACT_VLAN is not set > # CONFIG_NET_ACT_BPF is not set > # CONFIG_NET_ACT_CONNMARK is not set > # CONFIG_NET_ACT_CTINFO is not set > # CONFIG_NET_ACT_SKBMOD is not set > # CONFIG_NET_ACT_IFE is not set > # CONFIG_NET_ACT_TUNNEL_KEY is not set > # CONFIG_NET_ACT_GATE is not set > # CONFIG_NET_TC_SKB_EXT is not set > CONFIG_NET_SCH_FIFO=y > CONFIG_DCB=y > CONFIG_DNS_RESOLVER=m > CONFIG_BATMAN_ADV=m > CONFIG_BATMAN_ADV_BATMAN_V=y > CONFIG_BATMAN_ADV_BLA=y > CONFIG_BATMAN_ADV_DAT=y > CONFIG_BATMAN_ADV_NC=y > CONFIG_BATMAN_ADV_MCAST=y > # CONFIG_BATMAN_ADV_DEBUG is not set > # CONFIG_BATMAN_ADV_TRACING is not set > CONFIG_OPENVSWITCH=m > CONFIG_OPENVSWITCH_GRE=m > CONFIG_OPENVSWITCH_VXLAN=m > # CONFIG_VSOCKETS is not set > CONFIG_NETLINK_DIAG=m > CONFIG_MPLS=y > CONFIG_NET_MPLS_GSO=y > # CONFIG_MPLS_ROUTING is not set > CONFIG_NET_NSH=m > # CONFIG_HSR is not set > # CONFIG_NET_SWITCHDEV is not set > # CONFIG_NET_L3_MASTER_DEV is not set > # CONFIG_QRTR is not set > # CONFIG_NET_NCSI is not set > CONFIG_MAX_SKB_FRAGS=17 > CONFIG_CGROUP_NET_PRIO=y > CONFIG_CGROUP_NET_CLASSID=y > CONFIG_NET_RX_BUSY_POLL=y > CONFIG_BQL=y > > # > # Network testing > # > CONFIG_NET_PKTGEN=m > CONFIG_NET_DROP_MONITOR=m > # end of Network testing > # end of Networking options > > CONFIG_HAMRADIO=y > > # > # Packet Radio protocols > # > CONFIG_AX25=m > CONFIG_AX25_DAMA_SLAVE=y > CONFIG_NETROM=m > CONFIG_ROSE=m > > # > # AX.25 network device drivers > # > CONFIG_MKISS=m > CONFIG_6PACK=m > CONFIG_BPQETHER=m > CONFIG_BAYCOM_SER_FDX=m > CONFIG_BAYCOM_SER_HDX=m > CONFIG_BAYCOM_PAR=m > CONFIG_BAYCOM_EPP=m > CONFIG_YAM=m > # end of AX.25 network device drivers > > CONFIG_CAN=m > CONFIG_CAN_RAW=m > CONFIG_CAN_BCM=m > CONFIG_CAN_GW=m > # CONFIG_CAN_J1939 is not set > # CONFIG_CAN_ISOTP is not set > CONFIG_BT=m > CONFIG_BT_BREDR=y > CONFIG_BT_RFCOMM=m > CONFIG_BT_RFCOMM_TTY=y > CONFIG_BT_BNEP=m > CONFIG_BT_BNEP_MC_FILTER=y > CONFIG_BT_BNEP_PROTO_FILTER=y > CONFIG_BT_CMTP=m > CONFIG_BT_HIDP=m > # CONFIG_BT_HS is not set > CONFIG_BT_LE=y > CONFIG_BT_LE_L2CAP_ECRED=y > # CONFIG_BT_LEDS is not set > # CONFIG_BT_MSFTEXT is not set > # CONFIG_BT_AOSPEXT is not set > CONFIG_BT_DEBUGFS=y > # CONFIG_BT_SELFTEST is not set > > # > # Bluetooth device drivers > # > CONFIG_BT_INTEL=m > CONFIG_BT_BCM=m > CONFIG_BT_RTL=m > CONFIG_BT_HCIBTUSB=m > # CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set > CONFIG_BT_HCIBTUSB_POLL_SYNC=y > CONFIG_BT_HCIBTUSB_BCM=y > # CONFIG_BT_HCIBTUSB_MTK is not set > CONFIG_BT_HCIBTUSB_RTL=y > CONFIG_BT_HCIBTSDIO=m > CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > CONFIG_BT_HCIUART_ATH3K=y > # CONFIG_BT_HCIUART_INTEL is not set > # CONFIG_BT_HCIUART_AG6XX is not set > CONFIG_BT_HCIBCM203X=m > # CONFIG_BT_HCIBCM4377 is not set > CONFIG_BT_HCIBPA10X=m > CONFIG_BT_HCIBFUSB=m > CONFIG_BT_HCIDTL1=m > CONFIG_BT_HCIBT3C=m > CONFIG_BT_HCIBLUECARD=m > CONFIG_BT_HCIVHCI=m > CONFIG_BT_MRVL=m > CONFIG_BT_MRVL_SDIO=m > CONFIG_BT_ATH3K=m > # CONFIG_BT_MTKSDIO is not set > CONFIG_BT_HCIRSI=m > # CONFIG_BT_VIRTIO is not set > # end of Bluetooth device drivers > > CONFIG_AF_RXRPC=m > # CONFIG_AF_RXRPC_IPV6 is not set > # CONFIG_AF_RXRPC_INJECT_LOSS is not set > # CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set > # CONFIG_AF_RXRPC_DEBUG is not set > # CONFIG_RXKAD is not set > # CONFIG_RXPERF is not set > # CONFIG_AF_KCM is not set > # CONFIG_MCTP is not set > CONFIG_FIB_RULES=y > CONFIG_WIRELESS=y > CONFIG_WIRELESS_EXT=y > CONFIG_WEXT_CORE=y > CONFIG_WEXT_PROC=y > CONFIG_WEXT_SPY=y > CONFIG_WEXT_PRIV=y > CONFIG_CFG80211=m > # CONFIG_NL80211_TESTMODE is not set > # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set > # CONFIG_CFG80211_CERTIFICATION_ONUS is not set > CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y > CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y > CONFIG_CFG80211_DEFAULT_PS=y > # CONFIG_CFG80211_DEBUGFS is not set > CONFIG_CFG80211_CRDA_SUPPORT=y > CONFIG_CFG80211_WEXT=y > CONFIG_CFG80211_WEXT_EXPORT=y > CONFIG_LIB80211=m > CONFIG_LIB80211_CRYPT_WEP=m > CONFIG_LIB80211_CRYPT_CCMP=m > CONFIG_LIB80211_CRYPT_TKIP=m > # CONFIG_LIB80211_DEBUG is not set > CONFIG_MAC80211=m > CONFIG_MAC80211_HAS_RC=y > CONFIG_MAC80211_RC_MINSTREL=y > CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y > CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" > CONFIG_MAC80211_MESH=y > CONFIG_MAC80211_LEDS=y > # CONFIG_MAC80211_DEBUGFS is not set > # CONFIG_MAC80211_MESSAGE_TRACING is not set > # CONFIG_MAC80211_DEBUG_MENU is not set > CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 > CONFIG_RFKILL=m > CONFIG_RFKILL_LEDS=y > CONFIG_RFKILL_INPUT=y > # CONFIG_RFKILL_GPIO is not set > CONFIG_NET_9P=m > CONFIG_NET_9P_FD=m > CONFIG_NET_9P_VIRTIO=m > CONFIG_NET_9P_RDMA=m > # CONFIG_NET_9P_DEBUG is not set > # CONFIG_CAIF is not set > CONFIG_CEPH_LIB=m > # CONFIG_CEPH_LIB_PRETTYDEBUG is not set > # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set > CONFIG_NFC=m > CONFIG_NFC_DIGITAL=m > # CONFIG_NFC_NCI is not set > # CONFIG_NFC_HCI is not set > > # > # Near Field Communication (NFC) devices > # > # CONFIG_NFC_TRF7970A is not set > CONFIG_NFC_SIM=m > CONFIG_NFC_PORT100=m > # CONFIG_NFC_PN533_USB is not set > # CONFIG_NFC_PN533_I2C is not set > # CONFIG_NFC_ST95HF is not set > # end of Near Field Communication (NFC) devices > > # CONFIG_PSAMPLE is not set > # CONFIG_NET_IFE is not set > # CONFIG_LWTUNNEL is not set > CONFIG_DST_CACHE=y > CONFIG_GRO_CELLS=y > CONFIG_NET_SELFTESTS=m > CONFIG_NET_DEVLINK=y > CONFIG_PAGE_POOL=y > # CONFIG_PAGE_POOL_STATS is not set > CONFIG_FAILOVER=m > CONFIG_ETHTOOL_NETLINK=y > > # > # Device Drivers > # > CONFIG_HAVE_PCI=y > CONFIG_FORCE_PCI=y > CONFIG_PCI=y > CONFIG_PCI_DOMAINS=y > CONFIG_PCI_SYSCALL=y > CONFIG_PCIEPORTBUS=y > CONFIG_PCIEAER=y > CONFIG_PCIEAER_INJECT=m > # CONFIG_PCIE_ECRC is not set > CONFIG_PCIEASPM=y > CONFIG_PCIEASPM_DEFAULT=y > # CONFIG_PCIEASPM_POWERSAVE is not set > # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set > # CONFIG_PCIEASPM_PERFORMANCE is not set > CONFIG_PCIE_PME=y > # CONFIG_PCIE_DPC is not set > # CONFIG_PCIE_PTM is not set > CONFIG_PCI_MSI=y > CONFIG_PCI_MSI_ARCH_FALLBACKS=y > CONFIG_PCI_QUIRKS=y > # CONFIG_PCI_DEBUG is not set > CONFIG_PCI_REALLOC_ENABLE_AUTO=y > CONFIG_PCI_STUB=m > # CONFIG_PCI_PF_STUB is not set > CONFIG_PCI_ATS=y > CONFIG_PCI_IOV=y > # CONFIG_PCI_PRI is not set > # CONFIG_PCI_PASID is not set > # CONFIG_PCIE_BUS_TUNE_OFF is not set > CONFIG_PCIE_BUS_DEFAULT=y > # CONFIG_PCIE_BUS_SAFE is not set > # CONFIG_PCIE_BUS_PERFORMANCE is not set > # CONFIG_PCIE_BUS_PEER2PEER is not set > CONFIG_VGA_ARB=y > CONFIG_VGA_ARB_MAX_GPUS=16 > # CONFIG_HOTPLUG_PCI is not set > > # > # PCI controller drivers > # > # CONFIG_PCI_FTPCI100 is not set > # CONFIG_PCI_HOST_GENERIC is not set > # CONFIG_PCIE_MICROCHIP_HOST is not set > # CONFIG_PCIE_XILINX is not set > > # > # Cadence-based PCIe controllers > # > # CONFIG_PCIE_CADENCE_PLAT_HOST is not set > # CONFIG_PCI_J721E_HOST is not set > # end of Cadence-based PCIe controllers > > # > # DesignWare-based PCIe controllers > # > # CONFIG_PCI_MESON is not set > # CONFIG_PCIE_DW_PLAT_HOST is not set > # end of DesignWare-based PCIe controllers > > # > # Mobiveil-based PCIe controllers > # > # end of Mobiveil-based PCIe controllers > # end of PCI controller drivers > > # > # PCI Endpoint > # > # CONFIG_PCI_ENDPOINT is not set > # end of PCI Endpoint > > # > # PCI switch controller drivers > # > # CONFIG_PCI_SW_SWITCHTEC is not set > # end of PCI switch controller drivers > > # CONFIG_CXL_BUS is not set > CONFIG_PCCARD=m > CONFIG_PCMCIA=m > CONFIG_PCMCIA_LOAD_CIS=y > CONFIG_CARDBUS=y > > # > # PC-card bridges > # > CONFIG_YENTA=m > CONFIG_YENTA_O2=y > CONFIG_YENTA_RICOH=y > CONFIG_YENTA_TI=y > CONFIG_YENTA_ENE_TUNE=y > CONFIG_YENTA_TOSHIBA=y > CONFIG_PD6729=m > CONFIG_I82092=m > CONFIG_PCCARD_NONSTATIC=y > # CONFIG_RAPIDIO is not set > > # > # Generic Driver Options > # > CONFIG_AUXILIARY_BUS=y > CONFIG_UEVENT_HELPER=y > CONFIG_UEVENT_HELPER_PATH="" > CONFIG_DEVTMPFS=y > # CONFIG_DEVTMPFS_MOUNT is not set > # CONFIG_DEVTMPFS_SAFE is not set > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > > # > # Firmware loader > # > CONFIG_FW_LOADER=y > CONFIG_FW_LOADER_DEBUG=y > CONFIG_EXTRA_FIRMWARE="" > # CONFIG_FW_LOADER_USER_HELPER is not set > # CONFIG_FW_LOADER_COMPRESS is not set > CONFIG_FW_CACHE=y > # CONFIG_FW_UPLOAD is not set > # end of Firmware loader > > CONFIG_WANT_DEV_COREDUMP=y > CONFIG_ALLOW_DEV_COREDUMP=y > CONFIG_DEV_COREDUMP=y > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set > # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set > CONFIG_GENERIC_CPU_AUTOPROBE=y > CONFIG_REGMAP=y > CONFIG_REGMAP_I2C=m > CONFIG_DMA_SHARED_BUFFER=y > # CONFIG_DMA_FENCE_TRACE is not set > # CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set > # end of Generic Driver Options > > # > # Bus devices > # > # CONFIG_MOXTET is not set > # CONFIG_MHI_BUS is not set > # CONFIG_MHI_BUS_EP is not set > # end of Bus devices > > CONFIG_CONNECTOR=y > CONFIG_PROC_EVENTS=y > > # > # Firmware Drivers > # > > # > # ARM System Control and Management Interface Protocol > # > # end of ARM System Control and Management Interface Protocol > > # CONFIG_FIRMWARE_MEMMAP is not set > # CONFIG_FW_CFG_SYSFS is not set > # CONFIG_GOOGLE_FIRMWARE is not set > > # > # Tegra firmware driver > # > # end of Tegra firmware driver > # end of Firmware Drivers > > # CONFIG_GNSS is not set > # CONFIG_MTD is not set > CONFIG_DTC=y > CONFIG_OF=y > # CONFIG_OF_UNITTEST is not set > CONFIG_OF_FLATTREE=y > CONFIG_OF_EARLY_FLATTREE=y > CONFIG_OF_KOBJ=y > CONFIG_OF_ADDRESS=y > CONFIG_OF_IRQ=y > CONFIG_OF_RESERVED_MEM=y > # CONFIG_OF_OVERLAY is not set > CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y > CONFIG_PARPORT=m > CONFIG_PARPORT_PC=m > CONFIG_PARPORT_SERIAL=m > # CONFIG_PARPORT_PC_FIFO is not set > # CONFIG_PARPORT_PC_SUPERIO is not set > CONFIG_PARPORT_PC_PCMCIA=m > CONFIG_PARPORT_1284=y > CONFIG_PARPORT_NOT_PC=y > CONFIG_BLK_DEV=y > CONFIG_BLK_DEV_NULL_BLK=m > CONFIG_BLK_DEV_FD=m > # CONFIG_BLK_DEV_FD_RAWCMD is not set > CONFIG_MAC_FLOPPY=y > CONFIG_CDROM=m > CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m > CONFIG_ZRAM=m > CONFIG_ZRAM_DEF_COMP_LZORLE=y > # CONFIG_ZRAM_DEF_COMP_LZ4 is not set > # CONFIG_ZRAM_DEF_COMP_LZO is not set > # CONFIG_ZRAM_DEF_COMP_LZ4HC is not set > CONFIG_ZRAM_DEF_COMP="lzo-rle" > # CONFIG_ZRAM_WRITEBACK is not set > # CONFIG_ZRAM_MEMORY_TRACKING is not set > # CONFIG_ZRAM_MULTI_COMP is not set > CONFIG_BLK_DEV_LOOP=m > CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 > CONFIG_BLK_DEV_DRBD=m > # CONFIG_DRBD_FAULT_INJECTION is not set > CONFIG_BLK_DEV_NBD=m > CONFIG_BLK_DEV_RAM=m > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=16384 > CONFIG_CDROM_PKTCDVD=m > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > # CONFIG_CDROM_PKTCDVD_WCACHE is not set > CONFIG_ATA_OVER_ETH=m > CONFIG_VIRTIO_BLK=m > CONFIG_BLK_DEV_RBD=m > # CONFIG_BLK_DEV_UBLK is not set > > # > # NVME Support > # > CONFIG_NVME_CORE=m > CONFIG_BLK_DEV_NVME=m > # CONFIG_NVME_MULTIPATH is not set > # CONFIG_NVME_VERBOSE_ERRORS is not set > # CONFIG_NVME_HWMON is not set > # CONFIG_NVME_RDMA is not set > # CONFIG_NVME_FC is not set > # CONFIG_NVME_TCP is not set > # CONFIG_NVME_AUTH is not set > # CONFIG_NVME_TARGET is not set > # end of NVME Support > > # > # Misc devices > # > CONFIG_SENSORS_LIS3LV02D=m > CONFIG_AD525X_DPOT=m > CONFIG_AD525X_DPOT_I2C=m > CONFIG_AD525X_DPOT_SPI=m > # CONFIG_DUMMY_IRQ is not set > CONFIG_PHANTOM=m > CONFIG_TIFM_CORE=m > CONFIG_TIFM_7XX1=m > CONFIG_ICS932S401=m > CONFIG_ENCLOSURE_SERVICES=m > CONFIG_HP_ILO=m > CONFIG_APDS9802ALS=m > CONFIG_ISL29003=m > CONFIG_ISL29020=m > CONFIG_SENSORS_TSL2550=m > CONFIG_SENSORS_BH1770=m > CONFIG_SENSORS_APDS990X=m > CONFIG_HMC6352=m > CONFIG_DS1682=m > # CONFIG_LATTICE_ECP3_CONFIG is not set > # CONFIG_SRAM is not set > # CONFIG_DW_XDATA_PCIE is not set > # CONFIG_PCI_ENDPOINT_TEST is not set > # CONFIG_XILINX_SDFEC is not set > # CONFIG_OPEN_DICE is not set > # CONFIG_VCPU_STALL_DETECTOR is not set > CONFIG_C2PORT=m > > # > # EEPROM support > # > CONFIG_EEPROM_AT24=m > CONFIG_EEPROM_AT25=m > CONFIG_EEPROM_LEGACY=m > CONFIG_EEPROM_MAX6875=m > CONFIG_EEPROM_93CX6=m > # CONFIG_EEPROM_93XX46 is not set > # CONFIG_EEPROM_IDT_89HPESX is not set > # CONFIG_EEPROM_EE1004 is not set > # end of EEPROM support > > CONFIG_CB710_CORE=m > # CONFIG_CB710_DEBUG is not set > CONFIG_CB710_DEBUG_ASSUMPTIONS=y > > # > # Texas Instruments shared transport line discipline > # > # CONFIG_TI_ST is not set > # end of Texas Instruments shared transport line discipline > > # CONFIG_SENSORS_LIS3_SPI is not set > CONFIG_SENSORS_LIS3_I2C=m > CONFIG_ALTERA_STAPL=m > # CONFIG_ECHO is not set > # CONFIG_BCM_VK is not set > # CONFIG_MISC_ALCOR_PCI is not set > # CONFIG_MISC_RTSX_PCI is not set > # CONFIG_MISC_RTSX_USB is not set > # CONFIG_UACCE is not set > # CONFIG_PVPANIC is not set > # CONFIG_GP_PCI1XXXX is not set > # end of Misc devices > > # > # SCSI device support > # > CONFIG_SCSI_MOD=y > CONFIG_RAID_ATTRS=m > CONFIG_SCSI_COMMON=y > CONFIG_SCSI=y > CONFIG_SCSI_DMA=y > CONFIG_SCSI_NETLINK=y > # CONFIG_SCSI_PROC_FS is not set > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > CONFIG_CHR_DEV_ST=m > CONFIG_BLK_DEV_SR=m > CONFIG_CHR_DEV_SG=m > CONFIG_BLK_DEV_BSG=y > CONFIG_CHR_DEV_SCH=m > CONFIG_SCSI_ENCLOSURE=m > CONFIG_SCSI_CONSTANTS=y > CONFIG_SCSI_LOGGING=y > CONFIG_SCSI_SCAN_ASYNC=y > > # > # SCSI Transports > # > CONFIG_SCSI_SPI_ATTRS=m > CONFIG_SCSI_FC_ATTRS=m > CONFIG_SCSI_ISCSI_ATTRS=m > CONFIG_SCSI_SAS_ATTRS=m > CONFIG_SCSI_SAS_LIBSAS=m > CONFIG_SCSI_SAS_ATA=y > CONFIG_SCSI_SAS_HOST_SMP=y > CONFIG_SCSI_SRP_ATTRS=m > # end of SCSI Transports > > CONFIG_SCSI_LOWLEVEL=y > CONFIG_ISCSI_TCP=m > CONFIG_ISCSI_BOOT_SYSFS=m > CONFIG_SCSI_CXGB3_ISCSI=m > CONFIG_SCSI_CXGB4_ISCSI=m > CONFIG_SCSI_BNX2_ISCSI=m > CONFIG_SCSI_BNX2X_FCOE=m > CONFIG_BE2ISCSI=m > CONFIG_BLK_DEV_3W_XXXX_RAID=m > CONFIG_SCSI_HPSA=m > CONFIG_SCSI_3W_9XXX=m > CONFIG_SCSI_3W_SAS=m > CONFIG_SCSI_ACARD=m > CONFIG_SCSI_AACRAID=m > CONFIG_SCSI_AIC7XXX=m > CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 > CONFIG_AIC7XXX_RESET_DELAY_MS=15000 > CONFIG_AIC7XXX_DEBUG_ENABLE=y > CONFIG_AIC7XXX_DEBUG_MASK=0 > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y > CONFIG_SCSI_AIC79XX=m > CONFIG_AIC79XX_CMDS_PER_DEVICE=32 > CONFIG_AIC79XX_RESET_DELAY_MS=15000 > CONFIG_AIC79XX_DEBUG_ENABLE=y > CONFIG_AIC79XX_DEBUG_MASK=0 > CONFIG_AIC79XX_REG_PRETTY_PRINT=y > CONFIG_SCSI_AIC94XX=m > # CONFIG_AIC94XX_DEBUG is not set > CONFIG_SCSI_MVSAS=m > # CONFIG_SCSI_MVSAS_DEBUG is not set > # CONFIG_SCSI_MVSAS_TASKLET is not set > CONFIG_SCSI_MVUMI=m > CONFIG_SCSI_ADVANSYS=m > CONFIG_SCSI_ARCMSR=m > CONFIG_SCSI_ESAS2R=m > CONFIG_MEGARAID_NEWGEN=y > CONFIG_MEGARAID_MM=m > CONFIG_MEGARAID_MAILBOX=m > # CONFIG_MEGARAID_LEGACY is not set > CONFIG_MEGARAID_SAS=m > CONFIG_SCSI_MPT3SAS=m > CONFIG_SCSI_MPT2SAS_MAX_SGE=128 > CONFIG_SCSI_MPT3SAS_MAX_SGE=128 > CONFIG_SCSI_MPT2SAS=m > # CONFIG_SCSI_MPI3MR is not set > # CONFIG_SCSI_SMARTPQI is not set > CONFIG_SCSI_HPTIOP=m > CONFIG_SCSI_BUSLOGIC=m > # CONFIG_SCSI_FLASHPOINT is not set > # CONFIG_SCSI_MYRB is not set > CONFIG_LIBFC=m > CONFIG_LIBFCOE=m > CONFIG_FCOE=m > # CONFIG_SCSI_SNIC is not set > CONFIG_SCSI_DMX3191D=m > # CONFIG_SCSI_FDOMAIN_PCI is not set > CONFIG_SCSI_IPS=m > # CONFIG_SCSI_INITIO is not set > CONFIG_SCSI_INIA100=m > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > CONFIG_SCSI_STEX=m > CONFIG_SCSI_SYM53C8XX_2=m > CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 > CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 > CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 > CONFIG_SCSI_SYM53C8XX_MMIO=y > CONFIG_SCSI_IPR=m > # CONFIG_SCSI_IPR_TRACE is not set > # CONFIG_SCSI_IPR_DUMP is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA_FC=m > CONFIG_TCM_QLA2XXX=m > # CONFIG_TCM_QLA2XXX_DEBUG is not set > CONFIG_SCSI_QLA_ISCSI=m > CONFIG_SCSI_LPFC=m > # CONFIG_SCSI_LPFC_DEBUG_FS is not set > # CONFIG_SCSI_EFCT is not set > CONFIG_SCSI_DC395x=m > # CONFIG_SCSI_AM53C974 is not set > CONFIG_SCSI_NSP32=m > # CONFIG_SCSI_WD719X is not set > # CONFIG_SCSI_DEBUG is not set > CONFIG_SCSI_MESH=m > CONFIG_SCSI_MESH_SYNC_RATE=5 > CONFIG_SCSI_MESH_RESET_DELAY_MS=4000 > CONFIG_SCSI_MAC53C94=m > CONFIG_SCSI_PMCRAID=m > CONFIG_SCSI_PM8001=m > CONFIG_SCSI_BFA_FC=m > CONFIG_SCSI_VIRTIO=m > CONFIG_SCSI_CHELSIO_FCOE=m > CONFIG_SCSI_LOWLEVEL_PCMCIA=y > CONFIG_PCMCIA_AHA152X=m > # CONFIG_PCMCIA_FDOMAIN is not set > CONFIG_PCMCIA_NINJA_SCSI=m > CONFIG_PCMCIA_QLOGIC=m > CONFIG_PCMCIA_SYM53C500=m > # CONFIG_SCSI_DH is not set > # end of SCSI device support > > CONFIG_ATA=y > CONFIG_SATA_HOST=y > CONFIG_PATA_TIMINGS=y > CONFIG_ATA_VERBOSE_ERROR=y > CONFIG_ATA_FORCE=y > CONFIG_SATA_PMP=y > > # > # Controllers with non-SFF native interface > # > CONFIG_SATA_AHCI=m > CONFIG_SATA_MOBILE_LPM_POLICY=0 > # CONFIG_SATA_AHCI_PLATFORM is not set > # CONFIG_AHCI_DWC is not set > # CONFIG_AHCI_CEVA is not set > # CONFIG_SATA_INIC162X is not set > CONFIG_SATA_ACARD_AHCI=m > CONFIG_SATA_SIL24=m > CONFIG_ATA_SFF=y > > # > # SFF controllers with custom DMA interface > # > CONFIG_PDC_ADMA=m > CONFIG_SATA_QSTOR=m > CONFIG_SATA_SX4=m > CONFIG_ATA_BMDMA=y > > # > # SATA SFF controllers with BMDMA > # > CONFIG_ATA_PIIX=m > # CONFIG_SATA_DWC is not set > CONFIG_SATA_MV=m > CONFIG_SATA_NV=m > CONFIG_SATA_PROMISE=m > CONFIG_SATA_SIL=m > CONFIG_SATA_SIS=m > CONFIG_SATA_SVW=m > CONFIG_SATA_ULI=m > CONFIG_SATA_VIA=m > CONFIG_SATA_VITESSE=m > > # > # PATA SFF controllers with BMDMA > # > # CONFIG_PATA_ALI is not set > # CONFIG_PATA_AMD is not set > CONFIG_PATA_ARTOP=m > # CONFIG_PATA_ATIIXP is not set > CONFIG_PATA_ATP867X=m > CONFIG_PATA_CMD64X=m > # CONFIG_PATA_CYPRESS is not set > # CONFIG_PATA_EFAR is not set > CONFIG_PATA_HPT366=m > CONFIG_PATA_HPT37X=m > # CONFIG_PATA_HPT3X2N is not set > # CONFIG_PATA_HPT3X3 is not set > CONFIG_PATA_IT8213=m > CONFIG_PATA_IT821X=m > CONFIG_PATA_JMICRON=m > CONFIG_PATA_MACIO=y > CONFIG_PATA_MARVELL=m > CONFIG_PATA_MPC52xx=m > CONFIG_PATA_NETCELL=m > CONFIG_PATA_NINJA32=m > CONFIG_PATA_NS87415=m > # CONFIG_PATA_OLDPIIX is not set > # CONFIG_PATA_OPTIDMA is not set > CONFIG_PATA_PDC2027X=m > CONFIG_PATA_PDC_OLD=m > # CONFIG_PATA_RADISYS is not set > CONFIG_PATA_RDC=m > CONFIG_PATA_SCH=m > # CONFIG_PATA_SERVERWORKS is not set > CONFIG_PATA_SIL680=m > CONFIG_PATA_SIS=m > CONFIG_PATA_TOSHIBA=m > # CONFIG_PATA_TRIFLEX is not set > CONFIG_PATA_VIA=m > CONFIG_PATA_WINBOND=m > > # > # PIO-only SFF controllers > # > # CONFIG_PATA_CMD640_PCI is not set > # CONFIG_PATA_MPIIX is not set > CONFIG_PATA_NS87410=m > # CONFIG_PATA_OPTI is not set > CONFIG_PATA_PCMCIA=m > # CONFIG_PATA_OF_PLATFORM is not set > # CONFIG_PATA_RZ1000 is not set > # CONFIG_PATA_PARPORT is not set > > # > # Generic fallback / legacy drivers > # > CONFIG_ATA_GENERIC=m > # CONFIG_PATA_LEGACY is not set > CONFIG_MD=y > CONFIG_BLK_DEV_MD=m > CONFIG_MD_LINEAR=m > CONFIG_MD_RAID0=m > CONFIG_MD_RAID1=m > CONFIG_MD_RAID10=m > CONFIG_MD_RAID456=m > CONFIG_MD_MULTIPATH=m > CONFIG_MD_FAULTY=m > # CONFIG_MD_CLUSTER is not set > CONFIG_BCACHE=m > # CONFIG_BCACHE_DEBUG is not set > # CONFIG_BCACHE_CLOSURES_DEBUG is not set > # CONFIG_BCACHE_ASYNC_REGISTRATION is not set > CONFIG_BLK_DEV_DM_BUILTIN=y > CONFIG_BLK_DEV_DM=m > # CONFIG_DM_DEBUG is not set > CONFIG_DM_BUFIO=m > # CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set > CONFIG_DM_BIO_PRISON=m > CONFIG_DM_PERSISTENT_DATA=m > # CONFIG_DM_UNSTRIPED is not set > CONFIG_DM_CRYPT=m > CONFIG_DM_SNAPSHOT=m > CONFIG_DM_THIN_PROVISIONING=m > CONFIG_DM_CACHE=m > CONFIG_DM_CACHE_SMQ=m > # CONFIG_DM_WRITECACHE is not set > CONFIG_DM_ERA=m > # CONFIG_DM_CLONE is not set > CONFIG_DM_MIRROR=m > CONFIG_DM_LOG_USERSPACE=m > CONFIG_DM_RAID=m > CONFIG_DM_ZERO=m > CONFIG_DM_MULTIPATH=m > CONFIG_DM_MULTIPATH_QL=m > CONFIG_DM_MULTIPATH_ST=m > # CONFIG_DM_MULTIPATH_HST is not set > # CONFIG_DM_MULTIPATH_IOA is not set > CONFIG_DM_DELAY=m > # CONFIG_DM_DUST is not set > CONFIG_DM_UEVENT=y > CONFIG_DM_FLAKEY=m > CONFIG_DM_VERITY=m > # CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set > # CONFIG_DM_VERITY_FEC is not set > CONFIG_DM_SWITCH=m > # CONFIG_DM_LOG_WRITES is not set > # CONFIG_DM_INTEGRITY is not set > # CONFIG_DM_AUDIT is not set > CONFIG_TARGET_CORE=m > CONFIG_TCM_IBLOCK=m > CONFIG_TCM_FILEIO=m > CONFIG_TCM_PSCSI=m > # CONFIG_TCM_USER2 is not set > CONFIG_LOOPBACK_TARGET=m > CONFIG_TCM_FC=m > CONFIG_ISCSI_TARGET=m > # CONFIG_ISCSI_TARGET_CXGB4 is not set > CONFIG_SBP_TARGET=m > # CONFIG_REMOTE_TARGET is not set > CONFIG_FUSION=y > CONFIG_FUSION_SPI=m > CONFIG_FUSION_FC=m > CONFIG_FUSION_SAS=m > CONFIG_FUSION_MAX_SGE=128 > CONFIG_FUSION_CTL=m > CONFIG_FUSION_LAN=m > # CONFIG_FUSION_LOGGING is not set > > # > # IEEE 1394 (FireWire) support > # > CONFIG_FIREWIRE=m > CONFIG_FIREWIRE_OHCI=m > CONFIG_FIREWIRE_SBP2=m > CONFIG_FIREWIRE_NET=m > CONFIG_FIREWIRE_NOSY=m > # end of IEEE 1394 (FireWire) support > > CONFIG_MACINTOSH_DRIVERS=y > CONFIG_ADB=y > CONFIG_ADB_CUDA=y > CONFIG_ADB_PMU=y > CONFIG_ADB_PMU_EVENT=y > CONFIG_ADB_PMU_LED=y > # CONFIG_ADB_PMU_LED_DISK is not set > # CONFIG_PMAC_APM_EMU is not set > CONFIG_PMAC_MEDIABAY=y > CONFIG_PMAC_BACKLIGHT=y > # CONFIG_PMAC_BACKLIGHT_LEGACY is not set > CONFIG_ADB_MACIO=y > CONFIG_INPUT_ADBHID=y > CONFIG_MAC_EMUMOUSEBTN=y > CONFIG_THERM_WINDTUNNEL=m > CONFIG_THERM_ADT746X=m > CONFIG_WINDFARM=m > CONFIG_ANSLCD=m > CONFIG_PMAC_RACKMETER=m > CONFIG_SENSORS_AMS=m > CONFIG_SENSORS_AMS_PMU=y > CONFIG_SENSORS_AMS_I2C=y > CONFIG_NETDEVICES=y > CONFIG_MII=m > CONFIG_NET_CORE=y > CONFIG_BONDING=m > CONFIG_DUMMY=m > # CONFIG_WIREGUARD is not set > CONFIG_EQUALIZER=m > CONFIG_NET_FC=y > CONFIG_IFB=m > CONFIG_NET_TEAM=m > CONFIG_NET_TEAM_MODE_BROADCAST=m > CONFIG_NET_TEAM_MODE_ROUNDROBIN=m > CONFIG_NET_TEAM_MODE_RANDOM=m > CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m > CONFIG_NET_TEAM_MODE_LOADBALANCE=m > CONFIG_MACVLAN=m > CONFIG_MACVTAP=m > # CONFIG_IPVLAN is not set > CONFIG_VXLAN=m > # CONFIG_GENEVE is not set > # CONFIG_BAREUDP is not set > # CONFIG_GTP is not set > # CONFIG_AMT is not set > # CONFIG_MACSEC is not set > CONFIG_NETCONSOLE=m > CONFIG_NETCONSOLE_DYNAMIC=y > CONFIG_NETPOLL=y > CONFIG_NET_POLL_CONTROLLER=y > CONFIG_TUN=m > CONFIG_TAP=m > # CONFIG_TUN_VNET_CROSS_LE is not set > CONFIG_VETH=m > CONFIG_VIRTIO_NET=m > CONFIG_NLMON=m > CONFIG_SUNGEM_PHY=m > CONFIG_ARCNET=m > CONFIG_ARCNET_1201=m > CONFIG_ARCNET_1051=m > CONFIG_ARCNET_RAW=m > CONFIG_ARCNET_CAP=m > # CONFIG_ARCNET_COM90xx is not set > CONFIG_ARCNET_COM90xxIO=m > # CONFIG_ARCNET_RIM_I is not set > CONFIG_ARCNET_COM20020=m > CONFIG_ARCNET_COM20020_PCI=m > CONFIG_ARCNET_COM20020_CS=m > CONFIG_ATM_DRIVERS=y > CONFIG_ATM_DUMMY=m > CONFIG_ATM_TCP=m > CONFIG_ATM_LANAI=m > CONFIG_ATM_ENI=m > # CONFIG_ATM_ENI_DEBUG is not set > # CONFIG_ATM_ENI_TUNE_BURST is not set > CONFIG_ATM_NICSTAR=m > CONFIG_ATM_NICSTAR_USE_SUNI=y > CONFIG_ATM_NICSTAR_USE_IDT77105=y > CONFIG_ATM_IDT77252=m > # CONFIG_ATM_IDT77252_DEBUG is not set > # CONFIG_ATM_IDT77252_RCV_ALL is not set > CONFIG_ATM_IDT77252_USE_SUNI=y > CONFIG_ATM_IA=m > # CONFIG_ATM_IA_DEBUG is not set > CONFIG_ATM_FORE200E=m > CONFIG_ATM_FORE200E_USE_TASKLET=y > CONFIG_ATM_FORE200E_TX_RETRY=16 > CONFIG_ATM_FORE200E_DEBUG=0 > CONFIG_ATM_HE=m > # CONFIG_ATM_HE_USE_SUNI is not set > CONFIG_ATM_SOLOS=m > CONFIG_ETHERNET=y > CONFIG_MDIO=m > CONFIG_NET_VENDOR_3COM=y > CONFIG_PCMCIA_3C574=m > CONFIG_PCMCIA_3C589=m > CONFIG_VORTEX=m > CONFIG_TYPHOON=m > CONFIG_NET_VENDOR_ADAPTEC=y > CONFIG_ADAPTEC_STARFIRE=m > CONFIG_NET_VENDOR_AGERE=y > # CONFIG_ET131X is not set > CONFIG_NET_VENDOR_ALACRITECH=y > # CONFIG_SLICOSS is not set > CONFIG_NET_VENDOR_ALTEON=y > CONFIG_ACENIC=m > # CONFIG_ACENIC_OMIT_TIGON_I is not set > # CONFIG_ALTERA_TSE is not set > CONFIG_NET_VENDOR_AMAZON=y > CONFIG_NET_VENDOR_AMD=y > # CONFIG_AMD8111_ETH is not set > CONFIG_PCNET32=m > CONFIG_PCMCIA_NMCLAN=m > CONFIG_NET_VENDOR_APPLE=y > CONFIG_MACE=m > # CONFIG_MACE_AAUI_PORT is not set > CONFIG_BMAC=m > CONFIG_NET_VENDOR_AQUANTIA=y > # CONFIG_AQTION is not set > # CONFIG_NET_VENDOR_ARC is not set > CONFIG_NET_VENDOR_ASIX=y > # CONFIG_SPI_AX88796C is not set > CONFIG_NET_VENDOR_ATHEROS=y > CONFIG_ATL2=m > CONFIG_ATL1=m > CONFIG_ATL1E=m > CONFIG_ATL1C=m > CONFIG_ALX=m > CONFIG_NET_VENDOR_BROADCOM=y > CONFIG_B44=m > CONFIG_B44_PCI_AUTOSELECT=y > CONFIG_B44_PCICORE_AUTOSELECT=y > CONFIG_B44_PCI=y > # CONFIG_BCMGENET is not set > CONFIG_BNX2=m > CONFIG_CNIC=m > CONFIG_TIGON3=m > CONFIG_TIGON3_HWMON=y > CONFIG_BNX2X=m > CONFIG_BNX2X_SRIOV=y > # CONFIG_SYSTEMPORT is not set > # CONFIG_BNXT is not set > CONFIG_NET_VENDOR_CADENCE=y > # CONFIG_MACB is not set > CONFIG_NET_VENDOR_CAVIUM=y > CONFIG_NET_VENDOR_CHELSIO=y > CONFIG_CHELSIO_T1=m > CONFIG_CHELSIO_T1_1G=y > CONFIG_CHELSIO_T3=m > CONFIG_CHELSIO_T4=m > # CONFIG_CHELSIO_T4_DCB is not set > CONFIG_CHELSIO_T4VF=m > CONFIG_CHELSIO_LIB=m > CONFIG_CHELSIO_INLINE_CRYPTO=y > CONFIG_NET_VENDOR_CISCO=y > CONFIG_ENIC=m > CONFIG_NET_VENDOR_CORTINA=y > # CONFIG_GEMINI_ETHERNET is not set > CONFIG_NET_VENDOR_DAVICOM=y > # CONFIG_DM9051 is not set > # CONFIG_DNET is not set > CONFIG_NET_VENDOR_DEC=y > CONFIG_NET_TULIP=y > CONFIG_DE2104X=m > CONFIG_DE2104X_DSL=0 > CONFIG_TULIP=m > # CONFIG_TULIP_MWI is not set > # CONFIG_TULIP_MMIO is not set > CONFIG_TULIP_NAPI=y > CONFIG_TULIP_NAPI_HW_MITIGATION=y > CONFIG_WINBOND_840=m > CONFIG_DM9102=m > CONFIG_ULI526X=m > CONFIG_PCMCIA_XIRCOM=m > CONFIG_NET_VENDOR_DLINK=y > CONFIG_DL2K=m > CONFIG_SUNDANCE=m > CONFIG_SUNDANCE_MMIO=y > CONFIG_NET_VENDOR_EMULEX=y > CONFIG_BE2NET=m > CONFIG_BE2NET_HWMON=y > CONFIG_BE2NET_BE2=y > CONFIG_BE2NET_BE3=y > CONFIG_BE2NET_LANCER=y > CONFIG_BE2NET_SKYHAWK=y > CONFIG_NET_VENDOR_ENGLEDER=y > # CONFIG_TSNEP is not set > CONFIG_NET_VENDOR_EZCHIP=y > # CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set > CONFIG_NET_VENDOR_FREESCALE=y > CONFIG_FEC_MPC52xx=m > CONFIG_FEC_MPC52xx_MDIO=y > # CONFIG_FSL_PQ_MDIO is not set > # CONFIG_FSL_XGMAC_MDIO is not set > # CONFIG_GIANFAR is not set > # CONFIG_FSL_ENETC is not set > # CONFIG_FSL_ENETC_VF is not set > # CONFIG_FSL_ENETC_IERB is not set > # CONFIG_FSL_ENETC_MDIO is not set > CONFIG_NET_VENDOR_FUJITSU=y > CONFIG_PCMCIA_FMVJ18X=m > CONFIG_NET_VENDOR_FUNGIBLE=y > # CONFIG_FUN_ETH is not set > CONFIG_NET_VENDOR_GOOGLE=y > CONFIG_NET_VENDOR_HUAWEI=y > CONFIG_NET_VENDOR_I825XX=y > CONFIG_NET_VENDOR_INTEL=y > CONFIG_E100=m > CONFIG_E1000=m > CONFIG_E1000E=m > CONFIG_IGB=m > CONFIG_IGB_HWMON=y > CONFIG_IGBVF=m > CONFIG_IXGBE=m > CONFIG_IXGBE_HWMON=y > CONFIG_IXGBE_DCB=y > CONFIG_IXGBEVF=m > CONFIG_I40E=m > CONFIG_I40E_DCB=y > CONFIG_IAVF=m > CONFIG_I40EVF=m > # CONFIG_ICE is not set > # CONFIG_FM10K is not set > # CONFIG_IGC is not set > CONFIG_JME=m > CONFIG_NET_VENDOR_ADI=y > CONFIG_NET_VENDOR_LITEX=y > # CONFIG_LITEX_LITEETH is not set > CONFIG_NET_VENDOR_MARVELL=y > CONFIG_MV643XX_ETH=m > CONFIG_MVMDIO=m > CONFIG_SKGE=m > # CONFIG_SKGE_DEBUG is not set > CONFIG_SKGE_GENESIS=y > CONFIG_SKY2=m > # CONFIG_SKY2_DEBUG is not set > CONFIG_NET_VENDOR_MELLANOX=y > CONFIG_MLX4_EN=m > CONFIG_MLX4_EN_DCB=y > CONFIG_MLX4_CORE=m > CONFIG_MLX4_DEBUG=y > CONFIG_MLX4_CORE_GEN2=y > CONFIG_MLX5_CORE=m > # CONFIG_MLX5_FPGA is not set > # CONFIG_MLX5_CORE_EN is not set > # CONFIG_MLXSW_CORE is not set > # CONFIG_MLXFW is not set > CONFIG_NET_VENDOR_MICREL=y > # CONFIG_KS8842 is not set > # CONFIG_KS8851 is not set > # CONFIG_KS8851_MLL is not set > CONFIG_KSZ884X_PCI=m > CONFIG_NET_VENDOR_MICROCHIP=y > # CONFIG_ENC28J60 is not set > # CONFIG_ENCX24J600 is not set > # CONFIG_LAN743X is not set > # CONFIG_VCAP is not set > CONFIG_NET_VENDOR_MICROSEMI=y > CONFIG_NET_VENDOR_MICROSOFT=y > CONFIG_NET_VENDOR_MYRI=y > CONFIG_MYRI10GE=m > CONFIG_FEALNX=m > CONFIG_NET_VENDOR_NI=y > # CONFIG_NI_XGE_MANAGEMENT_ENET is not set > CONFIG_NET_VENDOR_NATSEMI=y > CONFIG_NATSEMI=m > CONFIG_NS83820=m > CONFIG_NET_VENDOR_NETERION=y > CONFIG_S2IO=m > CONFIG_NET_VENDOR_NETRONOME=y > # CONFIG_NFP is not set > CONFIG_NET_VENDOR_8390=y > CONFIG_PCMCIA_AXNET=m > CONFIG_NE2K_PCI=m > CONFIG_PCMCIA_PCNET=m > CONFIG_NET_VENDOR_NVIDIA=y > # CONFIG_FORCEDETH is not set > CONFIG_NET_VENDOR_OKI=y > # CONFIG_ETHOC is not set > CONFIG_NET_VENDOR_PACKET_ENGINES=y > CONFIG_HAMACHI=m > CONFIG_YELLOWFIN=m > CONFIG_NET_VENDOR_PENSANDO=y > CONFIG_NET_VENDOR_QLOGIC=y > CONFIG_QLA3XXX=m > CONFIG_QLCNIC=m > CONFIG_QLCNIC_SRIOV=y > CONFIG_QLCNIC_DCB=y > CONFIG_QLCNIC_HWMON=y > CONFIG_NETXEN_NIC=m > # CONFIG_QED is not set > CONFIG_NET_VENDOR_BROCADE=y > CONFIG_BNA=m > CONFIG_NET_VENDOR_QUALCOMM=y > # CONFIG_QCA7000_SPI is not set > # CONFIG_QCOM_EMAC is not set > # CONFIG_RMNET is not set > CONFIG_NET_VENDOR_RDC=y > CONFIG_R6040=m > CONFIG_NET_VENDOR_REALTEK=y > CONFIG_8139CP=m > CONFIG_8139TOO=m > CONFIG_8139TOO_PIO=y > # CONFIG_8139TOO_TUNE_TWISTER is not set > CONFIG_8139TOO_8129=y > # CONFIG_8139_OLD_RX_RESET is not set > CONFIG_R8169=m > CONFIG_NET_VENDOR_RENESAS=y > CONFIG_NET_VENDOR_ROCKER=y > CONFIG_NET_VENDOR_SAMSUNG=y > # CONFIG_SXGBE_ETH is not set > # CONFIG_NET_VENDOR_SEEQ is not set > CONFIG_NET_VENDOR_SILAN=y > CONFIG_SC92031=m > CONFIG_NET_VENDOR_SIS=y > CONFIG_SIS900=m > CONFIG_SIS190=m > CONFIG_NET_VENDOR_SOLARFLARE=y > CONFIG_SFC=m > CONFIG_SFC_MCDI_MON=y > CONFIG_SFC_SRIOV=y > CONFIG_SFC_MCDI_LOGGING=y > # CONFIG_SFC_FALCON is not set > # CONFIG_SFC_SIENA is not set > CONFIG_NET_VENDOR_SMSC=y > CONFIG_PCMCIA_SMC91C92=m > CONFIG_EPIC100=m > # CONFIG_SMSC911X is not set > CONFIG_SMSC9420=m > CONFIG_NET_VENDOR_SOCIONEXT=y > CONFIG_NET_VENDOR_STMICRO=y > # CONFIG_STMMAC_ETH is not set > CONFIG_NET_VENDOR_SUN=y > CONFIG_HAPPYMEAL=m > CONFIG_SUNGEM=m > CONFIG_CASSINI=m > CONFIG_NIU=m > CONFIG_NET_VENDOR_SYNOPSYS=y > # CONFIG_DWC_XLGMAC is not set > CONFIG_NET_VENDOR_TEHUTI=y > CONFIG_TEHUTI=m > CONFIG_NET_VENDOR_TI=y > # CONFIG_TI_CPSW_PHY_SEL is not set > CONFIG_TLAN=m > CONFIG_NET_VENDOR_VERTEXCOM=y > # CONFIG_MSE102X is not set > CONFIG_NET_VENDOR_VIA=y > CONFIG_VIA_RHINE=m > CONFIG_VIA_RHINE_MMIO=y > CONFIG_VIA_VELOCITY=m > CONFIG_NET_VENDOR_WANGXUN=y > # CONFIG_NGBE is not set > # CONFIG_TXGBE is not set > CONFIG_NET_VENDOR_WIZNET=y > # CONFIG_WIZNET_W5100 is not set > # CONFIG_WIZNET_W5300 is not set > CONFIG_NET_VENDOR_XILINX=y > # CONFIG_XILINX_EMACLITE is not set > # CONFIG_XILINX_AXI_EMAC is not set > # CONFIG_XILINX_LL_TEMAC is not set > CONFIG_NET_VENDOR_XIRCOM=y > CONFIG_PCMCIA_XIRC2PS=m > CONFIG_FDDI=y > CONFIG_DEFXX=m > CONFIG_SKFP=m > CONFIG_HIPPI=y > # CONFIG_ROADRUNNER is not set > CONFIG_PHYLINK=m > CONFIG_PHYLIB=m > CONFIG_SWPHY=y > # CONFIG_LED_TRIGGER_PHY is not set > CONFIG_PHYLIB_LEDS=y > CONFIG_FIXED_PHY=m > # CONFIG_SFP is not set > > # > # MII PHY device drivers > # > CONFIG_AMD_PHY=m > # CONFIG_ADIN_PHY is not set > # CONFIG_ADIN1100_PHY is not set > # CONFIG_AQUANTIA_PHY is not set > CONFIG_AX88796B_PHY=m > CONFIG_BROADCOM_PHY=m > # CONFIG_BCM54140_PHY is not set > # CONFIG_BCM7XXX_PHY is not set > # CONFIG_BCM84881_PHY is not set > CONFIG_BCM87XX_PHY=m > CONFIG_BCM_NET_PHYLIB=m > CONFIG_CICADA_PHY=m > # CONFIG_CORTINA_PHY is not set > CONFIG_DAVICOM_PHY=m > CONFIG_ICPLUS_PHY=m > CONFIG_LXT_PHY=m > # CONFIG_INTEL_XWAY_PHY is not set > CONFIG_LSI_ET1011C_PHY=m > CONFIG_MARVELL_PHY=m > # CONFIG_MARVELL_10G_PHY is not set > # CONFIG_MARVELL_88X2222_PHY is not set > # CONFIG_MAXLINEAR_GPHY is not set > # CONFIG_MEDIATEK_GE_PHY is not set > CONFIG_MICREL_PHY=m > # CONFIG_MICROCHIP_T1S_PHY is not set > # CONFIG_MICROCHIP_PHY is not set > # CONFIG_MICROCHIP_T1_PHY is not set > # CONFIG_MICROSEMI_PHY is not set > # CONFIG_MOTORCOMM_PHY is not set > CONFIG_NATIONAL_PHY=m > # CONFIG_NXP_CBTX_PHY is not set > # CONFIG_NXP_C45_TJA11XX_PHY is not set > # CONFIG_NXP_TJA11XX_PHY is not set > # CONFIG_NCN26000_PHY is not set > CONFIG_QSEMI_PHY=m > CONFIG_REALTEK_PHY=m > # CONFIG_RENESAS_PHY is not set > # CONFIG_ROCKCHIP_PHY is not set > CONFIG_SMSC_PHY=m > CONFIG_STE10XP=m > # CONFIG_TERANETICS_PHY is not set > # CONFIG_DP83822_PHY is not set > # CONFIG_DP83TC811_PHY is not set > # CONFIG_DP83848_PHY is not set > # CONFIG_DP83867_PHY is not set > # CONFIG_DP83869_PHY is not set > # CONFIG_DP83TD510_PHY is not set > CONFIG_VITESSE_PHY=m > # CONFIG_XILINX_GMII2RGMII is not set > # CONFIG_MICREL_KS8995MA is not set > # CONFIG_PSE_CONTROLLER is not set > CONFIG_CAN_DEV=m > CONFIG_CAN_VCAN=m > # CONFIG_CAN_VXCAN is not set > CONFIG_CAN_NETLINK=y > CONFIG_CAN_CALC_BITTIMING=y > # CONFIG_CAN_CAN327 is not set > # CONFIG_CAN_FLEXCAN is not set > # CONFIG_CAN_GRCAN is not set > # CONFIG_CAN_KVASER_PCIEFD is not set > CONFIG_CAN_SLCAN=m > # CONFIG_CAN_C_CAN is not set > # CONFIG_CAN_CC770 is not set > # CONFIG_CAN_CTUCANFD_PCI is not set > # CONFIG_CAN_CTUCANFD_PLATFORM is not set > # CONFIG_CAN_IFI_CANFD is not set > # CONFIG_CAN_M_CAN is not set > # CONFIG_CAN_MSCAN is not set > # CONFIG_CAN_PEAK_PCIEFD is not set > CONFIG_CAN_SJA1000=m > CONFIG_CAN_EMS_PCI=m > CONFIG_CAN_EMS_PCMCIA=m > # CONFIG_CAN_F81601 is not set > CONFIG_CAN_KVASER_PCI=m > CONFIG_CAN_PEAK_PCI=m > CONFIG_CAN_PEAK_PCIEC=y > CONFIG_CAN_PEAK_PCMCIA=m > CONFIG_CAN_PLX_PCI=m > CONFIG_CAN_SJA1000_ISA=m > # CONFIG_CAN_SJA1000_PLATFORM is not set > CONFIG_CAN_SOFTING=m > CONFIG_CAN_SOFTING_CS=m > > # > # CAN SPI interfaces > # > # CONFIG_CAN_HI311X is not set > # CONFIG_CAN_MCP251X is not set > # CONFIG_CAN_MCP251XFD is not set > # end of CAN SPI interfaces > > # > # CAN USB interfaces > # > CONFIG_CAN_8DEV_USB=m > CONFIG_CAN_EMS_USB=m > # CONFIG_CAN_ESD_USB is not set > # CONFIG_CAN_ETAS_ES58X is not set > # CONFIG_CAN_F81604 is not set > CONFIG_CAN_GS_USB=m > CONFIG_CAN_KVASER_USB=m > # CONFIG_CAN_MCBA_USB is not set > CONFIG_CAN_PEAK_USB=m > # CONFIG_CAN_UCAN is not set > # end of CAN USB interfaces > > # CONFIG_CAN_DEBUG_DEVICES is not set > CONFIG_MDIO_DEVICE=m > CONFIG_MDIO_BUS=m > CONFIG_FWNODE_MDIO=m > CONFIG_OF_MDIO=m > CONFIG_MDIO_DEVRES=m > # CONFIG_MDIO_BITBANG is not set > # CONFIG_MDIO_BCM_UNIMAC is not set > # CONFIG_MDIO_HISI_FEMAC is not set > # CONFIG_MDIO_MVUSB is not set > # CONFIG_MDIO_IPQ4019 is not set > > # > # MDIO Multiplexers > # > # CONFIG_MDIO_BUS_MUX_GPIO is not set > # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set > # CONFIG_MDIO_BUS_MUX_MMIOREG is not set > > # > # PCS device drivers > # > # end of PCS device drivers > > # CONFIG_PLIP is not set > CONFIG_PPP=m > CONFIG_PPP_BSDCOMP=m > CONFIG_PPP_DEFLATE=m > CONFIG_PPP_FILTER=y > CONFIG_PPP_MPPE=m > CONFIG_PPP_MULTILINK=y > CONFIG_PPPOATM=m > CONFIG_PPPOE=m > # CONFIG_PPPOE_HASH_BITS_1 is not set > # CONFIG_PPPOE_HASH_BITS_2 is not set > CONFIG_PPPOE_HASH_BITS_4=y > # CONFIG_PPPOE_HASH_BITS_8 is not set > CONFIG_PPPOE_HASH_BITS=4 > CONFIG_PPTP=m > CONFIG_PPPOL2TP=m > CONFIG_PPP_ASYNC=m > CONFIG_PPP_SYNC_TTY=m > CONFIG_SLIP=m > CONFIG_SLHC=m > CONFIG_SLIP_COMPRESSED=y > CONFIG_SLIP_SMART=y > CONFIG_SLIP_MODE_SLIP6=y > > # > # Host-side USB support is needed for USB Network Adapter support > # > CONFIG_USB_NET_DRIVERS=m > CONFIG_USB_CATC=m > CONFIG_USB_KAWETH=m > CONFIG_USB_PEGASUS=m > CONFIG_USB_RTL8150=m > CONFIG_USB_RTL8152=m > # CONFIG_USB_LAN78XX is not set > CONFIG_USB_USBNET=m > CONFIG_USB_NET_AX8817X=m > CONFIG_USB_NET_AX88179_178A=m > CONFIG_USB_NET_CDCETHER=m > CONFIG_USB_NET_CDC_EEM=m > CONFIG_USB_NET_CDC_NCM=m > CONFIG_USB_NET_HUAWEI_CDC_NCM=m > CONFIG_USB_NET_CDC_MBIM=m > CONFIG_USB_NET_DM9601=m > CONFIG_USB_NET_SR9700=m > CONFIG_USB_NET_SR9800=m > CONFIG_USB_NET_SMSC75XX=m > CONFIG_USB_NET_SMSC95XX=m > CONFIG_USB_NET_GL620A=m > CONFIG_USB_NET_NET1080=m > CONFIG_USB_NET_PLUSB=m > CONFIG_USB_NET_MCS7830=m > CONFIG_USB_NET_RNDIS_HOST=m > CONFIG_USB_NET_CDC_SUBSET_ENABLE=m > CONFIG_USB_NET_CDC_SUBSET=m > CONFIG_USB_ALI_M5632=y > CONFIG_USB_AN2720=y > CONFIG_USB_BELKIN=y > CONFIG_USB_ARMLINUX=y > CONFIG_USB_EPSON2888=y > CONFIG_USB_KC2190=y > CONFIG_USB_NET_ZAURUS=m > CONFIG_USB_NET_CX82310_ETH=m > CONFIG_USB_NET_KALMIA=m > CONFIG_USB_NET_QMI_WWAN=m > CONFIG_USB_HSO=m > CONFIG_USB_NET_INT51X1=m > CONFIG_USB_CDC_PHONET=m > CONFIG_USB_IPHETH=m > CONFIG_USB_SIERRA_NET=m > CONFIG_USB_VL600=m > # CONFIG_USB_NET_CH9200 is not set > # CONFIG_USB_NET_AQC111 is not set > CONFIG_USB_RTL8153_ECM=m > CONFIG_WLAN=y > CONFIG_WLAN_VENDOR_ADMTEK=y > CONFIG_ADM8211=m > CONFIG_ATH_COMMON=m > CONFIG_WLAN_VENDOR_ATH=y > # CONFIG_ATH_DEBUG is not set > CONFIG_ATH5K=m > # CONFIG_ATH5K_DEBUG is not set > # CONFIG_ATH5K_TRACER is not set > CONFIG_ATH5K_PCI=y > CONFIG_ATH9K_HW=m > CONFIG_ATH9K_COMMON=m > CONFIG_ATH9K_BTCOEX_SUPPORT=y > CONFIG_ATH9K=m > CONFIG_ATH9K_PCI=y > # CONFIG_ATH9K_AHB is not set > # CONFIG_ATH9K_DEBUGFS is not set > # CONFIG_ATH9K_DYNACK is not set > # CONFIG_ATH9K_WOW is not set > CONFIG_ATH9K_RFKILL=y > # CONFIG_ATH9K_CHANNEL_CONTEXT is not set > CONFIG_ATH9K_PCOEM=y > # CONFIG_ATH9K_PCI_NO_EEPROM is not set > CONFIG_ATH9K_HTC=m > # CONFIG_ATH9K_HTC_DEBUGFS is not set > # CONFIG_ATH9K_HWRNG is not set > CONFIG_CARL9170=m > CONFIG_CARL9170_LEDS=y > CONFIG_CARL9170_WPC=y > # CONFIG_CARL9170_HWRNG is not set > CONFIG_ATH6KL=m > CONFIG_ATH6KL_SDIO=m > CONFIG_ATH6KL_USB=m > # CONFIG_ATH6KL_DEBUG is not set > # CONFIG_ATH6KL_TRACING is not set > CONFIG_AR5523=m > CONFIG_WIL6210=m > CONFIG_WIL6210_ISR_COR=y > CONFIG_WIL6210_TRACING=y > CONFIG_WIL6210_DEBUGFS=y > CONFIG_ATH10K=m > CONFIG_ATH10K_CE=y > CONFIG_ATH10K_PCI=m > # CONFIG_ATH10K_SDIO is not set > # CONFIG_ATH10K_USB is not set > # CONFIG_ATH10K_DEBUG is not set > # CONFIG_ATH10K_DEBUGFS is not set > # CONFIG_ATH10K_TRACING is not set > # CONFIG_WCN36XX is not set > # CONFIG_ATH11K is not set > # CONFIG_ATH12K is not set > CONFIG_WLAN_VENDOR_ATMEL=y > CONFIG_ATMEL=m > # CONFIG_PCI_ATMEL is not set > CONFIG_PCMCIA_ATMEL=m > CONFIG_AT76C50X_USB=m > CONFIG_WLAN_VENDOR_BROADCOM=y > CONFIG_B43=m > CONFIG_B43_BCMA=y > CONFIG_B43_SSB=y > CONFIG_B43_BUSES_BCMA_AND_SSB=y > # CONFIG_B43_BUSES_BCMA is not set > # CONFIG_B43_BUSES_SSB is not set > CONFIG_B43_PCI_AUTOSELECT=y > CONFIG_B43_PCICORE_AUTOSELECT=y > CONFIG_B43_SDIO=y > CONFIG_B43_BCMA_PIO=y > CONFIG_B43_PIO=y > CONFIG_B43_PHY_G=y > CONFIG_B43_PHY_N=y > CONFIG_B43_PHY_LP=y > CONFIG_B43_PHY_HT=y > CONFIG_B43_LEDS=y > CONFIG_B43_HWRNG=y > # CONFIG_B43_DEBUG is not set > CONFIG_B43LEGACY=m > CONFIG_B43LEGACY_PCI_AUTOSELECT=y > CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y > CONFIG_B43LEGACY_LEDS=y > CONFIG_B43LEGACY_HWRNG=y > CONFIG_B43LEGACY_DEBUG=y > CONFIG_B43LEGACY_DMA=y > CONFIG_B43LEGACY_PIO=y > CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y > # CONFIG_B43LEGACY_DMA_MODE is not set > # CONFIG_B43LEGACY_PIO_MODE is not set > CONFIG_BRCMUTIL=m > CONFIG_BRCMSMAC=m > # CONFIG_BRCMFMAC is not set > # CONFIG_BRCM_TRACING is not set > # CONFIG_BRCMDBG is not set > CONFIG_WLAN_VENDOR_CISCO=y > CONFIG_AIRO=m > CONFIG_AIRO_CS=m > CONFIG_WLAN_VENDOR_INTEL=y > # CONFIG_IPW2100 is not set > CONFIG_IPW2200=m > CONFIG_IPW2200_MONITOR=y > CONFIG_IPW2200_RADIOTAP=y > CONFIG_IPW2200_PROMISCUOUS=y > CONFIG_IPW2200_QOS=y > # CONFIG_IPW2200_DEBUG is not set > CONFIG_LIBIPW=m > # CONFIG_LIBIPW_DEBUG is not set > CONFIG_IWLEGACY=m > CONFIG_IWL4965=m > CONFIG_IWL3945=m > > # > # iwl3945 / iwl4965 Debugging Options > # > # CONFIG_IWLEGACY_DEBUG is not set > # end of iwl3945 / iwl4965 Debugging Options > > CONFIG_IWLWIFI=m > CONFIG_IWLWIFI_LEDS=y > CONFIG_IWLDVM=m > CONFIG_IWLMVM=m > CONFIG_IWLWIFI_OPMODE_MODULAR=y > > # > # Debugging Options > # > # CONFIG_IWLWIFI_DEBUG is not set > # CONFIG_IWLWIFI_DEVICE_TRACING is not set > # end of Debugging Options > > CONFIG_WLAN_VENDOR_INTERSIL=y > CONFIG_HOSTAP=m > CONFIG_HOSTAP_FIRMWARE=y > # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set > CONFIG_HOSTAP_PLX=m > CONFIG_HOSTAP_PCI=m > CONFIG_HOSTAP_CS=m > CONFIG_HERMES=m > # CONFIG_HERMES_PRISM is not set > CONFIG_HERMES_CACHE_FW_ON_INIT=y > CONFIG_APPLE_AIRPORT=m > CONFIG_PLX_HERMES=m > CONFIG_TMD_HERMES=m > CONFIG_NORTEL_HERMES=m > CONFIG_PCMCIA_HERMES=m > CONFIG_PCMCIA_SPECTRUM=m > CONFIG_ORINOCO_USB=m > CONFIG_P54_COMMON=m > CONFIG_P54_USB=m > CONFIG_P54_PCI=m > # CONFIG_P54_SPI is not set > CONFIG_P54_LEDS=y > CONFIG_WLAN_VENDOR_MARVELL=y > CONFIG_LIBERTAS=m > CONFIG_LIBERTAS_USB=m > CONFIG_LIBERTAS_CS=m > CONFIG_LIBERTAS_SDIO=m > # CONFIG_LIBERTAS_SPI is not set > # CONFIG_LIBERTAS_DEBUG is not set > CONFIG_LIBERTAS_MESH=y > CONFIG_LIBERTAS_THINFIRM=m > # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set > CONFIG_LIBERTAS_THINFIRM_USB=m > CONFIG_MWIFIEX=m > CONFIG_MWIFIEX_SDIO=m > CONFIG_MWIFIEX_PCIE=m > # CONFIG_MWIFIEX_USB is not set > CONFIG_MWL8K=m > CONFIG_WLAN_VENDOR_MEDIATEK=y > # CONFIG_MT7601U is not set > # CONFIG_MT76x0U is not set > # CONFIG_MT76x0E is not set > # CONFIG_MT76x2E is not set > # CONFIG_MT76x2U is not set > # CONFIG_MT7603E is not set > # CONFIG_MT7615E is not set > # CONFIG_MT7663U is not set > # CONFIG_MT7663S is not set > # CONFIG_MT7915E is not set > # CONFIG_MT7921E is not set > # CONFIG_MT7921S is not set > # CONFIG_MT7921U is not set > # CONFIG_MT7996E is not set > CONFIG_WLAN_VENDOR_MICROCHIP=y > # CONFIG_WILC1000_SDIO is not set > # CONFIG_WILC1000_SPI is not set > CONFIG_WLAN_VENDOR_PURELIFI=y > # CONFIG_PLFXLC is not set > CONFIG_WLAN_VENDOR_RALINK=y > CONFIG_RT2X00=m > CONFIG_RT2400PCI=m > CONFIG_RT2500PCI=m > CONFIG_RT61PCI=m > CONFIG_RT2800PCI=m > CONFIG_RT2800PCI_RT33XX=y > CONFIG_RT2800PCI_RT35XX=y > CONFIG_RT2800PCI_RT53XX=y > CONFIG_RT2800PCI_RT3290=y > CONFIG_RT2500USB=m > CONFIG_RT73USB=m > CONFIG_RT2800USB=m > CONFIG_RT2800USB_RT33XX=y > CONFIG_RT2800USB_RT35XX=y > CONFIG_RT2800USB_RT3573=y > CONFIG_RT2800USB_RT53XX=y > CONFIG_RT2800USB_RT55XX=y > # CONFIG_RT2800USB_UNKNOWN is not set > CONFIG_RT2800_LIB=m > CONFIG_RT2800_LIB_MMIO=m > CONFIG_RT2X00_LIB_MMIO=m > CONFIG_RT2X00_LIB_PCI=m > CONFIG_RT2X00_LIB_USB=m > CONFIG_RT2X00_LIB=m > CONFIG_RT2X00_LIB_FIRMWARE=y > CONFIG_RT2X00_LIB_CRYPTO=y > CONFIG_RT2X00_LIB_LEDS=y > # CONFIG_RT2X00_DEBUG is not set > CONFIG_WLAN_VENDOR_REALTEK=y > CONFIG_RTL8180=m > CONFIG_RTL8187=m > CONFIG_RTL8187_LEDS=y > CONFIG_RTL_CARDS=m > CONFIG_RTL8192CE=m > CONFIG_RTL8192SE=m > CONFIG_RTL8192DE=m > CONFIG_RTL8723AE=m > CONFIG_RTL8723BE=m > CONFIG_RTL8188EE=m > # CONFIG_RTL8192EE is not set > # CONFIG_RTL8821AE is not set > CONFIG_RTL8192CU=m > CONFIG_RTLWIFI=m > CONFIG_RTLWIFI_PCI=m > CONFIG_RTLWIFI_USB=m > # CONFIG_RTLWIFI_DEBUG is not set > CONFIG_RTL8192C_COMMON=m > CONFIG_RTL8723_COMMON=m > CONFIG_RTLBTCOEXIST=m > # CONFIG_RTL8XXXU is not set > # CONFIG_RTW88 is not set > # CONFIG_RTW89 is not set > CONFIG_WLAN_VENDOR_RSI=y > CONFIG_RSI_91X=m > CONFIG_RSI_DEBUGFS=y > # CONFIG_RSI_SDIO is not set > CONFIG_RSI_USB=m > CONFIG_RSI_COEX=y > CONFIG_WLAN_VENDOR_SILABS=y > # CONFIG_WFX is not set > CONFIG_WLAN_VENDOR_ST=y > # CONFIG_CW1200 is not set > CONFIG_WLAN_VENDOR_TI=y > # CONFIG_WL1251 is not set > # CONFIG_WL12XX is not set > # CONFIG_WL18XX is not set > # CONFIG_WLCORE is not set > CONFIG_WLAN_VENDOR_ZYDAS=y > CONFIG_USB_ZD1201=m > CONFIG_ZD1211RW=m > # CONFIG_ZD1211RW_DEBUG is not set > CONFIG_WLAN_VENDOR_QUANTENNA=y > # CONFIG_QTNFMAC_PCIE is not set > CONFIG_PCMCIA_RAYCS=m > CONFIG_PCMCIA_WL3501=m > CONFIG_USB_NET_RNDIS_WLAN=m > CONFIG_MAC80211_HWSIM=m > # CONFIG_VIRT_WIFI is not set > CONFIG_WAN=y > CONFIG_HDLC=m > CONFIG_HDLC_RAW=m > CONFIG_HDLC_RAW_ETH=m > CONFIG_HDLC_CISCO=m > CONFIG_HDLC_FR=m > CONFIG_HDLC_PPP=m > # CONFIG_HDLC_X25 is not set > CONFIG_PCI200SYN=m > CONFIG_WANXL=m > # CONFIG_PC300TOO is not set > CONFIG_FARSYNC=m > CONFIG_IEEE802154_DRIVERS=m > > # > # Wireless WAN > # > # CONFIG_WWAN is not set > # end of Wireless WAN > > CONFIG_VMXNET3=m > # CONFIG_NETDEVSIM is not set > CONFIG_NET_FAILOVER=m > CONFIG_ISDN=y > CONFIG_ISDN_CAPI=y > CONFIG_CAPI_TRACE=y > CONFIG_ISDN_CAPI_MIDDLEWARE=y > CONFIG_MISDN=m > CONFIG_MISDN_DSP=m > CONFIG_MISDN_L1OIP=m > > # > # mISDN hardware drivers > # > CONFIG_MISDN_HFCPCI=m > CONFIG_MISDN_HFCMULTI=m > CONFIG_MISDN_HFCUSB=m > CONFIG_MISDN_AVMFRITZ=m > CONFIG_MISDN_SPEEDFAX=m > CONFIG_MISDN_INFINEON=m > CONFIG_MISDN_W6692=m > # CONFIG_MISDN_NETJET is not set > CONFIG_MISDN_IPAC=m > CONFIG_MISDN_ISAR=m > > # > # Input device support > # > CONFIG_INPUT=y > CONFIG_INPUT_LEDS=y > CONFIG_INPUT_FF_MEMLESS=m > CONFIG_INPUT_SPARSEKMAP=m > CONFIG_INPUT_MATRIXKMAP=m > CONFIG_INPUT_VIVALDIFMAP=m > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > CONFIG_INPUT_JOYDEV=m > CONFIG_INPUT_EVDEV=m > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > # CONFIG_KEYBOARD_ADC is not set > CONFIG_KEYBOARD_ADP5588=m > # CONFIG_KEYBOARD_ADP5589 is not set > CONFIG_KEYBOARD_ATKBD=m > # CONFIG_KEYBOARD_QT1050 is not set > # CONFIG_KEYBOARD_QT1070 is not set > CONFIG_KEYBOARD_QT2160=m > # CONFIG_KEYBOARD_DLINK_DIR685 is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_GPIO is not set > # CONFIG_KEYBOARD_GPIO_POLLED is not set > # CONFIG_KEYBOARD_TCA6416 is not set > # CONFIG_KEYBOARD_TCA8418 is not set > # CONFIG_KEYBOARD_MATRIX is not set > CONFIG_KEYBOARD_LM8323=m > # CONFIG_KEYBOARD_LM8333 is not set > CONFIG_KEYBOARD_MAX7359=m > # CONFIG_KEYBOARD_MCS is not set > # CONFIG_KEYBOARD_MPR121 is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_KEYBOARD_OPENCORES=m > # CONFIG_KEYBOARD_SAMSUNG is not set > CONFIG_KEYBOARD_STOWAWAY=m > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_OMAP4 is not set > # CONFIG_KEYBOARD_TM2_TOUCHKEY is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_CAP11XX is not set > # CONFIG_KEYBOARD_BCM is not set > # CONFIG_KEYBOARD_CYPRESS_SF is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=m > CONFIG_MOUSE_PS2_ALPS=y > CONFIG_MOUSE_PS2_BYD=y > CONFIG_MOUSE_PS2_LOGIPS2PP=y > CONFIG_MOUSE_PS2_SYNAPTICS=y > CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y > CONFIG_MOUSE_PS2_CYPRESS=y > CONFIG_MOUSE_PS2_TRACKPOINT=y > CONFIG_MOUSE_PS2_ELANTECH=y > CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y > CONFIG_MOUSE_PS2_SENTELIC=y > # CONFIG_MOUSE_PS2_TOUCHKIT is not set > CONFIG_MOUSE_PS2_FOCALTECH=y > CONFIG_MOUSE_PS2_SMBUS=y > # CONFIG_MOUSE_SERIAL is not set > CONFIG_MOUSE_APPLETOUCH=m > CONFIG_MOUSE_BCM5974=m > # CONFIG_MOUSE_CYAPA is not set > # CONFIG_MOUSE_ELAN_I2C is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_MOUSE_GPIO is not set > CONFIG_MOUSE_SYNAPTICS_I2C=m > CONFIG_MOUSE_SYNAPTICS_USB=m > CONFIG_INPUT_JOYSTICK=y > CONFIG_JOYSTICK_ANALOG=m > CONFIG_JOYSTICK_A3D=m > # CONFIG_JOYSTICK_ADC is not set > CONFIG_JOYSTICK_ADI=m > CONFIG_JOYSTICK_COBRA=m > CONFIG_JOYSTICK_GF2K=m > CONFIG_JOYSTICK_GRIP=m > CONFIG_JOYSTICK_GRIP_MP=m > CONFIG_JOYSTICK_GUILLEMOT=m > CONFIG_JOYSTICK_INTERACT=m > CONFIG_JOYSTICK_SIDEWINDER=m > CONFIG_JOYSTICK_TMDC=m > CONFIG_JOYSTICK_IFORCE=m > CONFIG_JOYSTICK_IFORCE_USB=m > CONFIG_JOYSTICK_IFORCE_232=m > CONFIG_JOYSTICK_WARRIOR=m > CONFIG_JOYSTICK_MAGELLAN=m > CONFIG_JOYSTICK_SPACEORB=m > CONFIG_JOYSTICK_SPACEBALL=m > CONFIG_JOYSTICK_STINGER=m > CONFIG_JOYSTICK_TWIDJOY=m > CONFIG_JOYSTICK_ZHENHUA=m > CONFIG_JOYSTICK_DB9=m > CONFIG_JOYSTICK_GAMECON=m > CONFIG_JOYSTICK_TURBOGRAFX=m > # CONFIG_JOYSTICK_AS5011 is not set > CONFIG_JOYSTICK_JOYDUMP=m > CONFIG_JOYSTICK_XPAD=m > CONFIG_JOYSTICK_XPAD_FF=y > CONFIG_JOYSTICK_XPAD_LEDS=y > CONFIG_JOYSTICK_WALKERA0701=m > # CONFIG_JOYSTICK_PSXPAD_SPI is not set > # CONFIG_JOYSTICK_PXRC is not set > # CONFIG_JOYSTICK_QWIIC is not set > # CONFIG_JOYSTICK_FSIA6B is not set > # CONFIG_JOYSTICK_SENSEHAT is not set > CONFIG_INPUT_TABLET=y > CONFIG_TABLET_USB_ACECAD=m > CONFIG_TABLET_USB_AIPTEK=m > CONFIG_TABLET_USB_HANWANG=m > CONFIG_TABLET_USB_KBTAB=m > # CONFIG_TABLET_USB_PEGASUS is not set > # CONFIG_TABLET_SERIAL_WACOM4 is not set > CONFIG_INPUT_TOUCHSCREEN=y > CONFIG_TOUCHSCREEN_ADS7846=m > CONFIG_TOUCHSCREEN_AD7877=m > CONFIG_TOUCHSCREEN_AD7879=m > CONFIG_TOUCHSCREEN_AD7879_I2C=m > # CONFIG_TOUCHSCREEN_AD7879_SPI is not set > # CONFIG_TOUCHSCREEN_ADC is not set > # CONFIG_TOUCHSCREEN_AR1021_I2C is not set > CONFIG_TOUCHSCREEN_ATMEL_MXT=m > # CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set > # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set > # CONFIG_TOUCHSCREEN_BU21013 is not set > # CONFIG_TOUCHSCREEN_BU21029 is not set > # CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set > # CONFIG_TOUCHSCREEN_CY8CTMA140 is not set > # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set > # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set > # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set > # CONFIG_TOUCHSCREEN_CYTTSP5 is not set > CONFIG_TOUCHSCREEN_DYNAPRO=m > CONFIG_TOUCHSCREEN_HAMPSHIRE=m > CONFIG_TOUCHSCREEN_EETI=m > # CONFIG_TOUCHSCREEN_EGALAX is not set > # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set > # CONFIG_TOUCHSCREEN_EXC3000 is not set > CONFIG_TOUCHSCREEN_FUJITSU=m > # CONFIG_TOUCHSCREEN_GOODIX is not set > # CONFIG_TOUCHSCREEN_HIDEEP is not set > # CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set > # CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set > # CONFIG_TOUCHSCREEN_ILI210X is not set > # CONFIG_TOUCHSCREEN_ILITEK is not set > # CONFIG_TOUCHSCREEN_S6SY761 is not set > CONFIG_TOUCHSCREEN_GUNZE=m > # CONFIG_TOUCHSCREEN_EKTF2127 is not set > # CONFIG_TOUCHSCREEN_ELAN is not set > CONFIG_TOUCHSCREEN_ELO=m > CONFIG_TOUCHSCREEN_WACOM_W8001=m > # CONFIG_TOUCHSCREEN_WACOM_I2C is not set > # CONFIG_TOUCHSCREEN_MAX11801 is not set > CONFIG_TOUCHSCREEN_MCS5000=m > # CONFIG_TOUCHSCREEN_MMS114 is not set > # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set > # CONFIG_TOUCHSCREEN_MSG2638 is not set > CONFIG_TOUCHSCREEN_MTOUCH=m > # CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set > # CONFIG_TOUCHSCREEN_IMAGIS is not set > # CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set > CONFIG_TOUCHSCREEN_INEXIO=m > CONFIG_TOUCHSCREEN_PENMOUNT=m > # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set > CONFIG_TOUCHSCREEN_TOUCHRIGHT=m > CONFIG_TOUCHSCREEN_TOUCHWIN=m > # CONFIG_TOUCHSCREEN_PIXCIR is not set > # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set > CONFIG_TOUCHSCREEN_WM97XX=m > CONFIG_TOUCHSCREEN_WM9705=y > CONFIG_TOUCHSCREEN_WM9712=y > CONFIG_TOUCHSCREEN_WM9713=y > CONFIG_TOUCHSCREEN_USB_COMPOSITE=m > CONFIG_TOUCHSCREEN_USB_EGALAX=y > CONFIG_TOUCHSCREEN_USB_PANJIT=y > CONFIG_TOUCHSCREEN_USB_3M=y > CONFIG_TOUCHSCREEN_USB_ITM=y > CONFIG_TOUCHSCREEN_USB_ETURBO=y > CONFIG_TOUCHSCREEN_USB_GUNZE=y > CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y > CONFIG_TOUCHSCREEN_USB_IRTOUCH=y > CONFIG_TOUCHSCREEN_USB_IDEALTEK=y > CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y > CONFIG_TOUCHSCREEN_USB_GOTOP=y > CONFIG_TOUCHSCREEN_USB_JASTEC=y > CONFIG_TOUCHSCREEN_USB_ELO=y > CONFIG_TOUCHSCREEN_USB_E2I=y > CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y > CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y > CONFIG_TOUCHSCREEN_USB_NEXIO=y > CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y > CONFIG_TOUCHSCREEN_TOUCHIT213=m > # CONFIG_TOUCHSCREEN_TSC_SERIO is not set > # CONFIG_TOUCHSCREEN_TSC2004 is not set > # CONFIG_TOUCHSCREEN_TSC2005 is not set > CONFIG_TOUCHSCREEN_TSC2007=m > # CONFIG_TOUCHSCREEN_TSC2007_IIO is not set > # CONFIG_TOUCHSCREEN_RM_TS is not set > # CONFIG_TOUCHSCREEN_SILEAD is not set > # CONFIG_TOUCHSCREEN_SIS_I2C is not set > # CONFIG_TOUCHSCREEN_ST1232 is not set > # CONFIG_TOUCHSCREEN_STMFTS is not set > CONFIG_TOUCHSCREEN_SUR40=m > # CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set > # CONFIG_TOUCHSCREEN_SX8654 is not set > CONFIG_TOUCHSCREEN_TPS6507X=m > # CONFIG_TOUCHSCREEN_ZET6223 is not set > # CONFIG_TOUCHSCREEN_ZFORCE is not set > # CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set > # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set > # CONFIG_TOUCHSCREEN_IQS5XX is not set > # CONFIG_TOUCHSCREEN_ZINITIX is not set > # CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set > CONFIG_INPUT_MISC=y > # CONFIG_INPUT_AD714X is not set > # CONFIG_INPUT_ATMEL_CAPTOUCH is not set > # CONFIG_INPUT_BMA150 is not set > # CONFIG_INPUT_E3X0_BUTTON is not set > CONFIG_INPUT_PCSPKR=m > # CONFIG_INPUT_MMA8450 is not set > # CONFIG_INPUT_GPIO_BEEPER is not set > # CONFIG_INPUT_GPIO_DECODER is not set > # CONFIG_INPUT_GPIO_VIBRA is not set > CONFIG_INPUT_ATI_REMOTE2=m > CONFIG_INPUT_KEYSPAN_REMOTE=m > # CONFIG_INPUT_KXTJ9 is not set > CONFIG_INPUT_POWERMATE=m > CONFIG_INPUT_YEALINK=m > CONFIG_INPUT_CM109=m > CONFIG_INPUT_UINPUT=m > # CONFIG_INPUT_PCF8574 is not set > # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set > # CONFIG_INPUT_DA7280_HAPTICS is not set > # CONFIG_INPUT_ADXL34X is not set > # CONFIG_INPUT_IMS_PCU is not set > # CONFIG_INPUT_IQS269A is not set > # CONFIG_INPUT_IQS626A is not set > # CONFIG_INPUT_IQS7222 is not set > # CONFIG_INPUT_CMA3000 is not set > # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set > # CONFIG_INPUT_DRV260X_HAPTICS is not set > # CONFIG_INPUT_DRV2665_HAPTICS is not set > # CONFIG_INPUT_DRV2667_HAPTICS is not set > CONFIG_RMI4_CORE=m > # CONFIG_RMI4_I2C is not set > # CONFIG_RMI4_SPI is not set > # CONFIG_RMI4_SMB is not set > CONFIG_RMI4_F03=y > CONFIG_RMI4_F03_SERIO=m > CONFIG_RMI4_2D_SENSOR=y > CONFIG_RMI4_F11=y > CONFIG_RMI4_F12=y > CONFIG_RMI4_F30=y > # CONFIG_RMI4_F34 is not set > # CONFIG_RMI4_F3A is not set > # CONFIG_RMI4_F54 is not set > # CONFIG_RMI4_F55 is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=m > CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y > CONFIG_SERIO_I8042=m > CONFIG_SERIO_SERPORT=m > # CONFIG_SERIO_PARKBD is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=m > CONFIG_SERIO_RAW=m > # CONFIG_SERIO_XILINX_XPS_PS2 is not set > CONFIG_SERIO_ALTERA_PS2=m > # CONFIG_SERIO_PS2MULT is not set > # CONFIG_SERIO_ARC_PS2 is not set > # CONFIG_SERIO_APBPS2 is not set > # CONFIG_SERIO_GPIO_PS2 is not set > # CONFIG_USERIO is not set > CONFIG_GAMEPORT=m > CONFIG_GAMEPORT_NS558=m > CONFIG_GAMEPORT_L4=m > CONFIG_GAMEPORT_EMU10K1=m > CONFIG_GAMEPORT_FM801=m > # end of Hardware I/O ports > # end of Input device support > > # > # Character devices > # > CONFIG_TTY=y > CONFIG_VT=y > CONFIG_CONSOLE_TRANSLATIONS=y > CONFIG_VT_CONSOLE=y > CONFIG_VT_CONSOLE_SLEEP=y > CONFIG_HW_CONSOLE=y > CONFIG_VT_HW_CONSOLE_BINDING=y > CONFIG_UNIX98_PTYS=y > # CONFIG_LEGACY_PTYS is not set > CONFIG_LEGACY_TIOCSTI=y > CONFIG_LDISC_AUTOLOAD=y > > # > # Serial drivers > # > CONFIG_SERIAL_EARLYCON=y > CONFIG_SERIAL_8250=y > # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set > CONFIG_SERIAL_8250_16550A_VARIANTS=y > # CONFIG_SERIAL_8250_FINTEK is not set > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_DMA=y > CONFIG_SERIAL_8250_PCILIB=y > CONFIG_SERIAL_8250_PCI=y > CONFIG_SERIAL_8250_EXAR=y > CONFIG_SERIAL_8250_CS=m > CONFIG_SERIAL_8250_NR_UARTS=32 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > # CONFIG_SERIAL_8250_PCI1XXXX is not set > CONFIG_SERIAL_8250_FSL=y > # CONFIG_SERIAL_8250_DW is not set > # CONFIG_SERIAL_8250_RT288X is not set > CONFIG_SERIAL_8250_PERICOM=y > # CONFIG_SERIAL_OF_PLATFORM is not set > > # > # Non-8250 serial port support > # > # CONFIG_SERIAL_MAX3100 is not set > # CONFIG_SERIAL_MAX310X is not set > # CONFIG_SERIAL_UARTLITE is not set > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_SERIAL_PMACZILOG=y > # CONFIG_SERIAL_PMACZILOG_TTYS is not set > CONFIG_SERIAL_PMACZILOG_CONSOLE=y > CONFIG_SERIAL_MPC52xx=y > CONFIG_SERIAL_MPC52xx_CONSOLE=y > CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 > CONFIG_SERIAL_JSM=m > # CONFIG_SERIAL_SIFIVE is not set > # CONFIG_SERIAL_SCCNXP is not set > # CONFIG_SERIAL_SC16IS7XX is not set > # CONFIG_SERIAL_ALTERA_JTAGUART is not set > # CONFIG_SERIAL_ALTERA_UART is not set > # CONFIG_SERIAL_XILINX_PS_UART is not set > # CONFIG_SERIAL_ARC is not set > CONFIG_SERIAL_RP2=m > CONFIG_SERIAL_RP2_NR_UARTS=32 > # CONFIG_SERIAL_FSL_LPUART is not set > # CONFIG_SERIAL_FSL_LINFLEXUART is not set > # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set > # CONFIG_SERIAL_SPRD is not set > # end of Serial drivers > > CONFIG_SERIAL_MCTRL_GPIO=y > # CONFIG_SERIAL_NONSTANDARD is not set > # CONFIG_PPC_EPAPR_HV_BYTECHAN is not set > CONFIG_IPWIRELESS=m > CONFIG_N_GSM=m > CONFIG_NOZOMI=m > # CONFIG_NULL_TTY is not set > CONFIG_HVC_DRIVER=y > CONFIG_HVC_RTAS=y > # CONFIG_HVC_UDBG is not set > # CONFIG_SERIAL_DEV_BUS is not set > # CONFIG_TTY_PRINTK is not set > CONFIG_PRINTER=m > # CONFIG_LP_CONSOLE is not set > # CONFIG_PPDEV is not set > CONFIG_VIRTIO_CONSOLE=m > CONFIG_IPMI_HANDLER=m > CONFIG_IPMI_PLAT_DATA=y > # CONFIG_IPMI_PANIC_EVENT is not set > CONFIG_IPMI_DEVICE_INTERFACE=m > CONFIG_IPMI_SI=m > # CONFIG_IPMI_SSIF is not set > CONFIG_IPMI_WATCHDOG=m > CONFIG_IPMI_POWEROFF=m > CONFIG_HW_RANDOM=m > # CONFIG_HW_RANDOM_TIMERIOMEM is not set > # CONFIG_HW_RANDOM_BA431 is not set > CONFIG_HW_RANDOM_VIRTIO=m > # CONFIG_HW_RANDOM_CCTRNG is not set > # CONFIG_HW_RANDOM_XIPHERA is not set > CONFIG_APPLICOM=m > CONFIG_DEVMEM=y > CONFIG_NVRAM=y > CONFIG_DEVPORT=y > # CONFIG_TCG_TPM is not set > # CONFIG_XILLYBUS is not set > # CONFIG_XILLYUSB is not set > # end of Character devices > > # > # I2C support > # > CONFIG_I2C=y > CONFIG_I2C_BOARDINFO=y > CONFIG_I2C_COMPAT=y > CONFIG_I2C_CHARDEV=m > CONFIG_I2C_MUX=m > > # > # Multiplexer I2C Chip support > # > # CONFIG_I2C_ARB_GPIO_CHALLENGE is not set > # CONFIG_I2C_MUX_GPIO is not set > # CONFIG_I2C_MUX_GPMUX is not set > # CONFIG_I2C_MUX_LTC4306 is not set > # CONFIG_I2C_MUX_PCA9541 is not set > # CONFIG_I2C_MUX_PCA954x is not set > # CONFIG_I2C_MUX_REG is not set > # CONFIG_I2C_MUX_MLXCPLD is not set > # end of Multiplexer I2C Chip support > > CONFIG_I2C_HELPER_AUTO=y > CONFIG_I2C_ALGOBIT=y > CONFIG_I2C_ALGOPCA=m > > # > # I2C Hardware Bus support > # > > # > # PC SMBus host controller drivers > # > # CONFIG_I2C_ALI1535 is not set > # CONFIG_I2C_ALI1563 is not set > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > # CONFIG_I2C_I801 is not set > CONFIG_I2C_ISCH=m > # CONFIG_I2C_PIIX4 is not set > # CONFIG_I2C_NFORCE2 is not set > # CONFIG_I2C_NVIDIA_GPU is not set > CONFIG_I2C_SIS5595=m > CONFIG_I2C_SIS630=m > CONFIG_I2C_SIS96X=m > CONFIG_I2C_VIA=m > CONFIG_I2C_VIAPRO=m > > # > # Mac SMBus host controller drivers > # > CONFIG_I2C_HYDRA=m > CONFIG_I2C_POWERMAC=y > > # > # I2C system bus drivers (mostly embedded / system-on-chip) > # > # CONFIG_I2C_CBUS_GPIO is not set > # CONFIG_I2C_DESIGNWARE_PLATFORM is not set > # CONFIG_I2C_DESIGNWARE_PCI is not set > # CONFIG_I2C_EMEV2 is not set > # CONFIG_I2C_GPIO is not set > CONFIG_I2C_MPC=m > CONFIG_I2C_OCORES=m > CONFIG_I2C_PCA_PLATFORM=m > # CONFIG_I2C_RK3X is not set > CONFIG_I2C_SIMTEC=m > # CONFIG_I2C_XILINX is not set > > # > # External I2C/SMBus adapter drivers > # > CONFIG_I2C_DIOLAN_U2C=m > # CONFIG_I2C_CP2615 is not set > # CONFIG_I2C_PARPORT is not set > # CONFIG_I2C_PCI1XXXX is not set > CONFIG_I2C_ROBOTFUZZ_OSIF=m > CONFIG_I2C_TAOS_EVM=m > CONFIG_I2C_TINY_USB=m > CONFIG_I2C_VIPERBOARD=m > > # > # Other I2C/SMBus bus drivers > # > # CONFIG_I2C_VIRTIO is not set > # end of I2C Hardware Bus support > > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_SLAVE is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # end of I2C support > > # CONFIG_I3C is not set > CONFIG_SPI=y > # CONFIG_SPI_DEBUG is not set > CONFIG_SPI_MASTER=y > # CONFIG_SPI_MEM is not set > > # > # SPI Master Controller Drivers > # > # CONFIG_SPI_ALTERA is not set > # CONFIG_SPI_AXI_SPI_ENGINE is not set > CONFIG_SPI_BITBANG=m > CONFIG_SPI_BUTTERFLY=m > # CONFIG_SPI_CADENCE is not set > # CONFIG_SPI_DESIGNWARE is not set > # CONFIG_SPI_GPIO is not set > CONFIG_SPI_LM70_LLP=m > # CONFIG_SPI_MPC52xx is not set > CONFIG_SPI_MPC52xx_PSC=m > # CONFIG_SPI_FSL_SPI is not set > # CONFIG_SPI_MICROCHIP_CORE is not set > # CONFIG_SPI_MICROCHIP_CORE_QSPI is not set > # CONFIG_SPI_OC_TINY is not set > # CONFIG_SPI_PCI1XXXX is not set > # CONFIG_SPI_PXA2XX is not set > # CONFIG_SPI_SC18IS602 is not set > # CONFIG_SPI_SIFIVE is not set > # CONFIG_SPI_MXIC is not set > # CONFIG_SPI_XCOMM is not set > # CONFIG_SPI_XILINX is not set > # CONFIG_SPI_ZYNQMP_GQSPI is not set > # CONFIG_SPI_AMD is not set > > # > # SPI Multiplexer support > # > # CONFIG_SPI_MUX is not set > > # > # SPI Protocol Masters > # > # CONFIG_SPI_SPIDEV is not set > # CONFIG_SPI_LOOPBACK_TEST is not set > # CONFIG_SPI_TLE62X0 is not set > # CONFIG_SPI_SLAVE is not set > # CONFIG_SPMI is not set > # CONFIG_HSI is not set > CONFIG_PPS=m > # CONFIG_PPS_DEBUG is not set > > # > # PPS clients support > # > # CONFIG_PPS_CLIENT_KTIMER is not set > CONFIG_PPS_CLIENT_LDISC=m > CONFIG_PPS_CLIENT_PARPORT=m > # CONFIG_PPS_CLIENT_GPIO is not set > > # > # PPS generators support > # > > # > # PTP clock support > # > CONFIG_PTP_1588_CLOCK=m > CONFIG_PTP_1588_CLOCK_OPTIONAL=m > > # > # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. > # > # CONFIG_PTP_1588_CLOCK_IDT82P33 is not set > # CONFIG_PTP_1588_CLOCK_IDTCM is not set > # end of PTP clock support > > # CONFIG_PINCTRL is not set > CONFIG_GPIOLIB=y > CONFIG_GPIOLIB_FASTPATH_LIMIT=512 > CONFIG_OF_GPIO=y > CONFIG_GPIOLIB_IRQCHIP=y > CONFIG_OF_GPIO_MM_GPIOCHIP=y > # CONFIG_DEBUG_GPIO is not set > # CONFIG_GPIO_SYSFS is not set > CONFIG_GPIO_CDEV=y > CONFIG_GPIO_CDEV_V1=y > > # > # Memory mapped GPIO drivers > # > # CONFIG_GPIO_74XX_MMIO is not set > # CONFIG_GPIO_ALTERA is not set > # CONFIG_GPIO_CADENCE is not set > # CONFIG_GPIO_DWAPB is not set > # CONFIG_GPIO_EXAR is not set > # CONFIG_GPIO_FTGPIO010 is not set > # CONFIG_GPIO_GENERIC_PLATFORM is not set > # CONFIG_GPIO_GRGPIO is not set > # CONFIG_GPIO_HLWD is not set > # CONFIG_GPIO_MB86S7X is not set > CONFIG_GPIO_MPC5200=y > # CONFIG_GPIO_SIFIVE is not set > # CONFIG_GPIO_XILINX is not set > # CONFIG_GPIO_AMD_FCH is not set > # end of Memory mapped GPIO drivers > > # > # I2C GPIO expanders > # > # CONFIG_GPIO_ADNP is not set > # CONFIG_GPIO_FXL6408 is not set > # CONFIG_GPIO_GW_PLD is not set > # CONFIG_GPIO_MAX7300 is not set > # CONFIG_GPIO_MAX732X is not set > # CONFIG_GPIO_PCA953X is not set > # CONFIG_GPIO_PCA9570 is not set > # CONFIG_GPIO_PCF857X is not set > # CONFIG_GPIO_TPIC2810 is not set > # end of I2C GPIO expanders > > # > # MFD GPIO expanders > # > # end of MFD GPIO expanders > > # > # PCI GPIO expanders > # > # CONFIG_GPIO_PCI_IDIO_16 is not set > # CONFIG_GPIO_PCIE_IDIO_24 is not set > # CONFIG_GPIO_RDC321X is not set > # end of PCI GPIO expanders > > # > # SPI GPIO expanders > # > # CONFIG_GPIO_74X164 is not set > # CONFIG_GPIO_MAX3191X is not set > # CONFIG_GPIO_MAX7301 is not set > # CONFIG_GPIO_MC33880 is not set > # CONFIG_GPIO_PISOSR is not set > # CONFIG_GPIO_XRA1403 is not set > # end of SPI GPIO expanders > > # > # USB GPIO expanders > # > # CONFIG_GPIO_VIPERBOARD is not set > # end of USB GPIO expanders > > # > # Virtual GPIO drivers > # > # CONFIG_GPIO_AGGREGATOR is not set > # CONFIG_GPIO_LATCH is not set > # CONFIG_GPIO_MOCKUP is not set > # CONFIG_GPIO_VIRTIO is not set > # CONFIG_GPIO_SIM is not set > # end of Virtual GPIO drivers > > CONFIG_W1=m > CONFIG_W1_CON=y > > # > # 1-wire Bus Masters > # > CONFIG_W1_MASTER_MATROX=m > CONFIG_W1_MASTER_DS2490=m > CONFIG_W1_MASTER_DS2482=m > # CONFIG_W1_MASTER_GPIO is not set > # CONFIG_W1_MASTER_SGI is not set > # end of 1-wire Bus Masters > > # > # 1-wire Slaves > # > CONFIG_W1_SLAVE_THERM=m > CONFIG_W1_SLAVE_SMEM=m > # CONFIG_W1_SLAVE_DS2405 is not set > # CONFIG_W1_SLAVE_DS2408 is not set > # CONFIG_W1_SLAVE_DS2413 is not set > # CONFIG_W1_SLAVE_DS2406 is not set > # CONFIG_W1_SLAVE_DS2423 is not set > # CONFIG_W1_SLAVE_DS2805 is not set > # CONFIG_W1_SLAVE_DS2430 is not set > CONFIG_W1_SLAVE_DS2431=m > CONFIG_W1_SLAVE_DS2433=m > # CONFIG_W1_SLAVE_DS2433_CRC is not set > # CONFIG_W1_SLAVE_DS2438 is not set > # CONFIG_W1_SLAVE_DS250X is not set > # CONFIG_W1_SLAVE_DS2780 is not set > # CONFIG_W1_SLAVE_DS2781 is not set > # CONFIG_W1_SLAVE_DS28E04 is not set > # CONFIG_W1_SLAVE_DS28E17 is not set > # end of 1-wire Slaves > > # CONFIG_POWER_RESET is not set > CONFIG_POWER_SUPPLY=y > # CONFIG_POWER_SUPPLY_DEBUG is not set > CONFIG_POWER_SUPPLY_HWMON=y > # CONFIG_GENERIC_ADC_BATTERY is not set > # CONFIG_IP5XXX_POWER is not set > # CONFIG_TEST_POWER is not set > # CONFIG_CHARGER_ADP5061 is not set > # CONFIG_BATTERY_CW2015 is not set > # CONFIG_BATTERY_DS2760 is not set > # CONFIG_BATTERY_DS2780 is not set > # CONFIG_BATTERY_DS2781 is not set > # CONFIG_BATTERY_DS2782 is not set > CONFIG_BATTERY_PMU=m > # CONFIG_BATTERY_SAMSUNG_SDI is not set > # CONFIG_BATTERY_SBS is not set > # CONFIG_CHARGER_SBS is not set > # CONFIG_MANAGER_SBS is not set > # CONFIG_BATTERY_BQ27XXX is not set > # CONFIG_BATTERY_MAX17040 is not set > # CONFIG_BATTERY_MAX17042 is not set > # CONFIG_BATTERY_MAX1721X is not set > # CONFIG_CHARGER_MAX8903 is not set > # CONFIG_CHARGER_LP8727 is not set > # CONFIG_CHARGER_GPIO is not set > # CONFIG_CHARGER_LT3651 is not set > # CONFIG_CHARGER_LTC4162L is not set > # CONFIG_CHARGER_DETECTOR_MAX14656 is not set > # CONFIG_CHARGER_MAX77976 is not set > # CONFIG_CHARGER_BQ2415X is not set > # CONFIG_CHARGER_BQ24257 is not set > # CONFIG_CHARGER_BQ24735 is not set > # CONFIG_CHARGER_BQ2515X is not set > # CONFIG_CHARGER_BQ25890 is not set > # CONFIG_CHARGER_BQ25980 is not set > # CONFIG_CHARGER_BQ256XX is not set > # CONFIG_BATTERY_GAUGE_LTC2941 is not set > # CONFIG_BATTERY_GOLDFISH is not set > # CONFIG_BATTERY_RT5033 is not set > # CONFIG_CHARGER_RT9455 is not set > # CONFIG_CHARGER_BD99954 is not set > # CONFIG_BATTERY_UG3105 is not set > CONFIG_HWMON=y > CONFIG_HWMON_VID=m > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Native drivers > # > # CONFIG_SENSORS_AD7314 is not set > CONFIG_SENSORS_AD7414=m > CONFIG_SENSORS_AD7418=m > CONFIG_SENSORS_ADM1025=m > CONFIG_SENSORS_ADM1026=m > CONFIG_SENSORS_ADM1029=m > CONFIG_SENSORS_ADM1031=m > # CONFIG_SENSORS_ADM1177 is not set > CONFIG_SENSORS_ADM9240=m > # CONFIG_SENSORS_ADT7310 is not set > # CONFIG_SENSORS_ADT7410 is not set > CONFIG_SENSORS_ADT7411=m > CONFIG_SENSORS_ADT7462=m > CONFIG_SENSORS_ADT7470=m > CONFIG_SENSORS_ADT7475=m > # CONFIG_SENSORS_AHT10 is not set > # CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set > # CONFIG_SENSORS_AS370 is not set > CONFIG_SENSORS_ASC7621=m > # CONFIG_SENSORS_AXI_FAN_CONTROL is not set > CONFIG_SENSORS_ATXP1=m > # CONFIG_SENSORS_CORSAIR_CPRO is not set > # CONFIG_SENSORS_CORSAIR_PSU is not set > # CONFIG_SENSORS_DRIVETEMP is not set > CONFIG_SENSORS_DS620=m > CONFIG_SENSORS_DS1621=m > CONFIG_SENSORS_I5K_AMB=m > CONFIG_SENSORS_F75375S=m > # CONFIG_SENSORS_FTSTEUTATES is not set > CONFIG_SENSORS_GL518SM=m > CONFIG_SENSORS_GL520SM=m > CONFIG_SENSORS_G760A=m > # CONFIG_SENSORS_G762 is not set > # CONFIG_SENSORS_GPIO_FAN is not set > # CONFIG_SENSORS_HIH6130 is not set > CONFIG_SENSORS_IBMAEM=m > CONFIG_SENSORS_IBMPEX=m > # CONFIG_SENSORS_IIO_HWMON is not set > CONFIG_SENSORS_JC42=m > # CONFIG_SENSORS_POWR1220 is not set > CONFIG_SENSORS_LINEAGE=m > # CONFIG_SENSORS_LTC2945 is not set > # CONFIG_SENSORS_LTC2947_I2C is not set > # CONFIG_SENSORS_LTC2947_SPI is not set > # CONFIG_SENSORS_LTC2990 is not set > # CONFIG_SENSORS_LTC2992 is not set > CONFIG_SENSORS_LTC4151=m > CONFIG_SENSORS_LTC4215=m > # CONFIG_SENSORS_LTC4222 is not set > CONFIG_SENSORS_LTC4245=m > # CONFIG_SENSORS_LTC4260 is not set > CONFIG_SENSORS_LTC4261=m > CONFIG_SENSORS_MAX1111=m > # CONFIG_SENSORS_MAX127 is not set > CONFIG_SENSORS_MAX16065=m > CONFIG_SENSORS_MAX1619=m > CONFIG_SENSORS_MAX1668=m > # CONFIG_SENSORS_MAX197 is not set > # CONFIG_SENSORS_MAX31722 is not set > # CONFIG_SENSORS_MAX31730 is not set > # CONFIG_SENSORS_MAX31760 is not set > # CONFIG_MAX31827 is not set > # CONFIG_SENSORS_MAX6620 is not set > # CONFIG_SENSORS_MAX6621 is not set > CONFIG_SENSORS_MAX6639=m > CONFIG_SENSORS_MAX6650=m > # CONFIG_SENSORS_MAX6697 is not set > # CONFIG_SENSORS_MAX31790 is not set > # CONFIG_SENSORS_MC34VR500 is not set > # CONFIG_SENSORS_MCP3021 is not set > # CONFIG_SENSORS_TC654 is not set > # CONFIG_SENSORS_TPS23861 is not set > # CONFIG_SENSORS_MR75203 is not set > CONFIG_SENSORS_ADCXX=m > CONFIG_SENSORS_LM63=m > CONFIG_SENSORS_LM70=m > CONFIG_SENSORS_LM73=m > CONFIG_SENSORS_LM75=m > CONFIG_SENSORS_LM77=m > CONFIG_SENSORS_LM78=m > CONFIG_SENSORS_LM80=m > CONFIG_SENSORS_LM83=m > CONFIG_SENSORS_LM85=m > CONFIG_SENSORS_LM87=m > CONFIG_SENSORS_LM90=m > CONFIG_SENSORS_LM92=m > CONFIG_SENSORS_LM93=m > # CONFIG_SENSORS_LM95234 is not set > CONFIG_SENSORS_LM95241=m > CONFIG_SENSORS_LM95245=m > CONFIG_SENSORS_NTC_THERMISTOR=m > # CONFIG_SENSORS_NCT6775_I2C is not set > # CONFIG_SENSORS_NCT7802 is not set > # CONFIG_SENSORS_NCT7904 is not set > # CONFIG_SENSORS_NPCM7XX is not set > # CONFIG_SENSORS_NZXT_KRAKEN2 is not set > # CONFIG_SENSORS_NZXT_SMART2 is not set > # CONFIG_SENSORS_OCC_P8_I2C is not set > CONFIG_SENSORS_PCF8591=m > # CONFIG_PMBUS is not set > # CONFIG_SENSORS_SBTSI is not set > # CONFIG_SENSORS_SBRMI is not set > # CONFIG_SENSORS_SHT15 is not set > CONFIG_SENSORS_SHT21=m > # CONFIG_SENSORS_SHT3x is not set > # CONFIG_SENSORS_SHT4x is not set > # CONFIG_SENSORS_SHTC1 is not set > CONFIG_SENSORS_SIS5595=m > CONFIG_SENSORS_EMC1403=m > CONFIG_SENSORS_EMC2103=m > # CONFIG_SENSORS_EMC2305 is not set > CONFIG_SENSORS_EMC6W201=m > CONFIG_SENSORS_SMSC47M192=m > # CONFIG_SENSORS_STTS751 is not set > CONFIG_SENSORS_SMM665=m > # CONFIG_SENSORS_ADC128D818 is not set > CONFIG_SENSORS_ADS7828=m > CONFIG_SENSORS_ADS7871=m > CONFIG_SENSORS_AMC6821=m > # CONFIG_SENSORS_INA209 is not set > # CONFIG_SENSORS_INA2XX is not set > # CONFIG_SENSORS_INA238 is not set > # CONFIG_SENSORS_INA3221 is not set > # CONFIG_SENSORS_TC74 is not set > CONFIG_SENSORS_THMC50=m > CONFIG_SENSORS_TMP102=m > # CONFIG_SENSORS_TMP103 is not set > # CONFIG_SENSORS_TMP108 is not set > CONFIG_SENSORS_TMP401=m > CONFIG_SENSORS_TMP421=m > # CONFIG_SENSORS_TMP464 is not set > # CONFIG_SENSORS_TMP513 is not set > CONFIG_SENSORS_VIA686A=m > CONFIG_SENSORS_VT8231=m > # CONFIG_SENSORS_W83773G is not set > CONFIG_SENSORS_W83781D=m > CONFIG_SENSORS_W83791D=m > CONFIG_SENSORS_W83792D=m > CONFIG_SENSORS_W83793=m > CONFIG_SENSORS_W83795=m > # CONFIG_SENSORS_W83795_FANCTRL is not set > CONFIG_SENSORS_W83L785TS=m > CONFIG_SENSORS_W83L786NG=m > # CONFIG_THERMAL is not set > CONFIG_WATCHDOG=y > CONFIG_WATCHDOG_CORE=y > # CONFIG_WATCHDOG_NOWAYOUT is not set > CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y > CONFIG_WATCHDOG_OPEN_TIMEOUT=0 > # CONFIG_WATCHDOG_SYSFS is not set > # CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set > > # > # Watchdog Pretimeout Governors > # > # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set > > # > # Watchdog Device Drivers > # > CONFIG_SOFT_WATCHDOG=m > # CONFIG_GPIO_WATCHDOG is not set > # CONFIG_XILINX_WATCHDOG is not set > # CONFIG_ZIIRAVE_WATCHDOG is not set > # CONFIG_CADENCE_WATCHDOG is not set > # CONFIG_DW_WATCHDOG is not set > # CONFIG_MAX63XX_WATCHDOG is not set > # CONFIG_ALIM7101_WDT is not set > # CONFIG_I6300ESB_WDT is not set > # CONFIG_MPC5200_WDT is not set > # CONFIG_MEN_A21_WDT is not set > CONFIG_WATCHDOG_RTAS=m > > # > # PCI-based Watchdog Cards > # > CONFIG_PCIPCWATCHDOG=m > CONFIG_WDTPCI=m > > # > # USB-based Watchdog Cards > # > CONFIG_USBPCWATCHDOG=m > CONFIG_SSB_POSSIBLE=y > CONFIG_SSB=m > CONFIG_SSB_SPROM=y > CONFIG_SSB_BLOCKIO=y > CONFIG_SSB_PCIHOST_POSSIBLE=y > CONFIG_SSB_PCIHOST=y > CONFIG_SSB_B43_PCI_BRIDGE=y > CONFIG_SSB_PCMCIAHOST_POSSIBLE=y > CONFIG_SSB_PCMCIAHOST=y > CONFIG_SSB_SDIOHOST_POSSIBLE=y > CONFIG_SSB_SDIOHOST=y > CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y > CONFIG_SSB_DRIVER_PCICORE=y > # CONFIG_SSB_DRIVER_GPIO is not set > CONFIG_BCMA_POSSIBLE=y > CONFIG_BCMA=m > CONFIG_BCMA_BLOCKIO=y > CONFIG_BCMA_HOST_PCI_POSSIBLE=y > CONFIG_BCMA_HOST_PCI=y > # CONFIG_BCMA_HOST_SOC is not set > CONFIG_BCMA_DRIVER_PCI=y > # CONFIG_BCMA_DRIVER_GMAC_CMN is not set > # CONFIG_BCMA_DRIVER_GPIO is not set > # CONFIG_BCMA_DEBUG is not set > > # > # Multifunction device drivers > # > CONFIG_MFD_CORE=m > # CONFIG_MFD_ACT8945A is not set > # CONFIG_MFD_AS3711 is not set > # CONFIG_MFD_SMPRO is not set > # CONFIG_MFD_AS3722 is not set > # CONFIG_PMIC_ADP5520 is not set > # CONFIG_MFD_AAT2870_CORE is not set > # CONFIG_MFD_ATMEL_FLEXCOM is not set > # CONFIG_MFD_ATMEL_HLCDC is not set > # CONFIG_MFD_BCM590XX is not set > # CONFIG_MFD_BD9571MWV is not set > # CONFIG_MFD_AXP20X_I2C is not set > # CONFIG_MFD_MADERA is not set > # CONFIG_MFD_MAX5970 is not set > # CONFIG_PMIC_DA903X is not set > # CONFIG_MFD_DA9052_SPI is not set > # CONFIG_MFD_DA9052_I2C is not set > # CONFIG_MFD_DA9055 is not set > # CONFIG_MFD_DA9062 is not set > # CONFIG_MFD_DA9063 is not set > # CONFIG_MFD_DA9150 is not set > # CONFIG_MFD_DLN2 is not set > # CONFIG_MFD_GATEWORKS_GSC is not set > # CONFIG_MFD_MC13XXX_SPI is not set > # CONFIG_MFD_MC13XXX_I2C is not set > # CONFIG_MFD_MP2629 is not set > # CONFIG_MFD_HI6421_PMIC is not set > # CONFIG_LPC_ICH is not set > CONFIG_LPC_SCH=m > # CONFIG_MFD_IQS62X is not set > # CONFIG_MFD_JANZ_CMODIO is not set > # CONFIG_MFD_KEMPLD is not set > # CONFIG_MFD_88PM800 is not set > # CONFIG_MFD_88PM805 is not set > # CONFIG_MFD_88PM860X is not set > # CONFIG_MFD_MAX14577 is not set > # CONFIG_MFD_MAX77541 is not set > # CONFIG_MFD_MAX77620 is not set > # CONFIG_MFD_MAX77650 is not set > # CONFIG_MFD_MAX77686 is not set > # CONFIG_MFD_MAX77693 is not set > # CONFIG_MFD_MAX77714 is not set > # CONFIG_MFD_MAX77843 is not set > # CONFIG_MFD_MAX8907 is not set > # CONFIG_MFD_MAX8925 is not set > # CONFIG_MFD_MAX8997 is not set > # CONFIG_MFD_MAX8998 is not set > # CONFIG_MFD_MT6360 is not set > # CONFIG_MFD_MT6370 is not set > # CONFIG_MFD_MT6397 is not set > # CONFIG_MFD_MENF21BMC is not set > # CONFIG_MFD_OCELOT is not set > # CONFIG_EZX_PCAP is not set > # CONFIG_MFD_CPCAP is not set > CONFIG_MFD_VIPERBOARD=m > # CONFIG_MFD_NTXEC is not set > # CONFIG_MFD_RETU is not set > # CONFIG_MFD_PCF50633 is not set > # CONFIG_MFD_SY7636A is not set > # CONFIG_MFD_RDC321X is not set > # CONFIG_MFD_RT4831 is not set > # CONFIG_MFD_RT5033 is not set > # CONFIG_MFD_RT5120 is not set > # CONFIG_MFD_RC5T583 is not set > # CONFIG_MFD_RK8XX_I2C is not set > # CONFIG_MFD_RK8XX_SPI is not set > # CONFIG_MFD_RN5T618 is not set > # CONFIG_MFD_SEC_CORE is not set > # CONFIG_MFD_SI476X_CORE is not set > # CONFIG_MFD_SM501 is not set > # CONFIG_MFD_SKY81452 is not set > # CONFIG_MFD_STMPE is not set > # CONFIG_MFD_SYSCON is not set > # CONFIG_MFD_TI_AM335X_TSCADC is not set > # CONFIG_MFD_LP3943 is not set > # CONFIG_MFD_LP8788 is not set > # CONFIG_MFD_TI_LMU is not set > # CONFIG_MFD_PALMAS is not set > # CONFIG_TPS6105X is not set > # CONFIG_TPS65010 is not set > # CONFIG_TPS6507X is not set > # CONFIG_MFD_TPS65086 is not set > # CONFIG_MFD_TPS65090 is not set > # CONFIG_MFD_TPS65217 is not set > # CONFIG_MFD_TI_LP873X is not set > # CONFIG_MFD_TI_LP87565 is not set > # CONFIG_MFD_TPS65218 is not set > # CONFIG_MFD_TPS65219 is not set > # CONFIG_MFD_TPS6586X is not set > # CONFIG_MFD_TPS65910 is not set > # CONFIG_MFD_TPS65912_I2C is not set > # CONFIG_MFD_TPS65912_SPI is not set > # CONFIG_MFD_TPS6594_I2C is not set > # CONFIG_MFD_TPS6594_SPI is not set > # CONFIG_TWL4030_CORE is not set > # CONFIG_TWL6040_CORE is not set > # CONFIG_MFD_WL1273_CORE is not set > # CONFIG_MFD_LM3533 is not set > # CONFIG_MFD_TC3589X is not set > # CONFIG_MFD_TQMX86 is not set > # CONFIG_MFD_VX855 is not set > # CONFIG_MFD_LOCHNAGAR is not set > # CONFIG_MFD_ARIZONA_I2C is not set > # CONFIG_MFD_ARIZONA_SPI is not set > # CONFIG_MFD_WM8400 is not set > # CONFIG_MFD_WM831X_I2C is not set > # CONFIG_MFD_WM831X_SPI is not set > # CONFIG_MFD_WM8350_I2C is not set > # CONFIG_MFD_WM8994 is not set > # CONFIG_MFD_ROHM_BD718XX is not set > # CONFIG_MFD_ROHM_BD71828 is not set > # CONFIG_MFD_ROHM_BD957XMUF is not set > # CONFIG_MFD_STPMIC1 is not set > # CONFIG_MFD_STMFX is not set > # CONFIG_MFD_ATC260X_I2C is not set > # CONFIG_MFD_QCOM_PM8008 is not set > # CONFIG_MFD_INTEL_M10_BMC_SPI is not set > # CONFIG_MFD_RSMU_I2C is not set > # CONFIG_MFD_RSMU_SPI is not set > # end of Multifunction device drivers > > # CONFIG_REGULATOR is not set > CONFIG_RC_CORE=m > # CONFIG_LIRC is not set > CONFIG_RC_MAP=m > CONFIG_RC_DECODERS=y > # CONFIG_IR_IMON_DECODER is not set > CONFIG_IR_JVC_DECODER=m > CONFIG_IR_MCE_KBD_DECODER=m > CONFIG_IR_NEC_DECODER=m > CONFIG_IR_RC5_DECODER=m > CONFIG_IR_RC6_DECODER=m > # CONFIG_IR_RCMM_DECODER is not set > CONFIG_IR_SANYO_DECODER=m > CONFIG_IR_SHARP_DECODER=m > CONFIG_IR_SONY_DECODER=m > # CONFIG_IR_XMP_DECODER is not set > CONFIG_RC_DEVICES=y > # CONFIG_IR_GPIO_CIR is not set > # CONFIG_IR_HIX5HD2 is not set > # CONFIG_IR_IGORPLUGUSB is not set > CONFIG_IR_IGUANA=m > CONFIG_IR_IMON=m > # CONFIG_IR_IMON_RAW is not set > CONFIG_IR_MCEUSB=m > CONFIG_IR_REDRAT3=m > # CONFIG_IR_SERIAL is not set > CONFIG_IR_STREAMZAP=m > # CONFIG_IR_TOY is not set > CONFIG_IR_TTUSBIR=m > CONFIG_RC_ATI_REMOTE=m > CONFIG_RC_LOOPBACK=m > # CONFIG_RC_XBOX_DVD is not set > > # > # CEC support > # > CONFIG_MEDIA_CEC_SUPPORT=y > # CONFIG_CEC_CH7322 is not set > # CONFIG_USB_PULSE8_CEC is not set > # CONFIG_USB_RAINSHADOW_CEC is not set > # end of CEC support > > CONFIG_MEDIA_SUPPORT=m > # CONFIG_MEDIA_SUPPORT_FILTER is not set > CONFIG_MEDIA_SUBDRV_AUTOSELECT=y > > # > # Media device types > # > CONFIG_MEDIA_CAMERA_SUPPORT=y > CONFIG_MEDIA_ANALOG_TV_SUPPORT=y > CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y > CONFIG_MEDIA_RADIO_SUPPORT=y > CONFIG_MEDIA_SDR_SUPPORT=y > CONFIG_MEDIA_PLATFORM_SUPPORT=y > CONFIG_MEDIA_TEST_SUPPORT=y > # end of Media device types > > # > # Media core support > # > CONFIG_VIDEO_DEV=m > CONFIG_MEDIA_CONTROLLER=y > CONFIG_DVB_CORE=m > # end of Media core support > > # > # Video4Linux options > # > CONFIG_VIDEO_V4L2_I2C=y > # CONFIG_VIDEO_ADV_DEBUG is not set > # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set > CONFIG_VIDEO_TUNER=m > CONFIG_V4L2_FWNODE=m > CONFIG_V4L2_ASYNC=m > CONFIG_VIDEOBUF_GEN=m > CONFIG_VIDEOBUF_DMA_SG=m > # end of Video4Linux options > > # > # Media controller options > # > CONFIG_MEDIA_CONTROLLER_DVB=y > # end of Media controller options > > # > # Digital TV options > # > # CONFIG_DVB_MMAP is not set > CONFIG_DVB_NET=y > CONFIG_DVB_MAX_ADAPTERS=8 > CONFIG_DVB_DYNAMIC_MINORS=y > # CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set > # CONFIG_DVB_ULE_DEBUG is not set > # end of Digital TV options > > # > # Media drivers > # > > # > # Media drivers > # > CONFIG_MEDIA_USB_SUPPORT=y > > # > # Webcam devices > # > CONFIG_USB_GSPCA=m > CONFIG_USB_GSPCA_BENQ=m > CONFIG_USB_GSPCA_CONEX=m > CONFIG_USB_GSPCA_CPIA1=m > CONFIG_USB_GSPCA_DTCS033=m > CONFIG_USB_GSPCA_ETOMS=m > CONFIG_USB_GSPCA_FINEPIX=m > CONFIG_USB_GSPCA_JEILINJ=m > CONFIG_USB_GSPCA_JL2005BCD=m > CONFIG_USB_GSPCA_KINECT=m > CONFIG_USB_GSPCA_KONICA=m > CONFIG_USB_GSPCA_MARS=m > CONFIG_USB_GSPCA_MR97310A=m > CONFIG_USB_GSPCA_NW80X=m > CONFIG_USB_GSPCA_OV519=m > CONFIG_USB_GSPCA_OV534=m > CONFIG_USB_GSPCA_OV534_9=m > CONFIG_USB_GSPCA_PAC207=m > CONFIG_USB_GSPCA_PAC7302=m > CONFIG_USB_GSPCA_PAC7311=m > CONFIG_USB_GSPCA_SE401=m > CONFIG_USB_GSPCA_SN9C2028=m > CONFIG_USB_GSPCA_SN9C20X=m > CONFIG_USB_GSPCA_SONIXB=m > CONFIG_USB_GSPCA_SONIXJ=m > CONFIG_USB_GSPCA_SPCA1528=m > CONFIG_USB_GSPCA_SPCA500=m > CONFIG_USB_GSPCA_SPCA501=m > CONFIG_USB_GSPCA_SPCA505=m > CONFIG_USB_GSPCA_SPCA506=m > CONFIG_USB_GSPCA_SPCA508=m > CONFIG_USB_GSPCA_SPCA561=m > CONFIG_USB_GSPCA_SQ905=m > CONFIG_USB_GSPCA_SQ905C=m > CONFIG_USB_GSPCA_SQ930X=m > CONFIG_USB_GSPCA_STK014=m > CONFIG_USB_GSPCA_STK1135=m > CONFIG_USB_GSPCA_STV0680=m > CONFIG_USB_GSPCA_SUNPLUS=m > CONFIG_USB_GSPCA_T613=m > CONFIG_USB_GSPCA_TOPRO=m > # CONFIG_USB_GSPCA_TOUPTEK is not set > CONFIG_USB_GSPCA_TV8532=m > CONFIG_USB_GSPCA_VC032X=m > CONFIG_USB_GSPCA_VICAM=m > CONFIG_USB_GSPCA_XIRLINK_CIT=m > CONFIG_USB_GSPCA_ZC3XX=m > CONFIG_USB_GL860=m > CONFIG_USB_M5602=m > CONFIG_USB_STV06XX=m > CONFIG_USB_PWC=m > # CONFIG_USB_PWC_DEBUG is not set > CONFIG_USB_PWC_INPUT_EVDEV=y > CONFIG_USB_S2255=m > CONFIG_VIDEO_USBTV=m > CONFIG_USB_VIDEO_CLASS=m > CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y > > # > # Analog TV USB devices > # > # CONFIG_VIDEO_GO7007 is not set > CONFIG_VIDEO_HDPVR=m > CONFIG_VIDEO_PVRUSB2=m > CONFIG_VIDEO_PVRUSB2_SYSFS=y > CONFIG_VIDEO_PVRUSB2_DVB=y > # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set > CONFIG_VIDEO_STK1160=m > > # > # Analog/digital TV USB devices > # > CONFIG_VIDEO_AU0828=m > CONFIG_VIDEO_AU0828_V4L2=y > # CONFIG_VIDEO_AU0828_RC is not set > CONFIG_VIDEO_CX231XX=m > CONFIG_VIDEO_CX231XX_RC=y > CONFIG_VIDEO_CX231XX_ALSA=m > CONFIG_VIDEO_CX231XX_DVB=m > > # > # Digital TV USB devices > # > # CONFIG_DVB_AS102 is not set > CONFIG_DVB_B2C2_FLEXCOP_USB=m > # CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set > CONFIG_DVB_USB_V2=m > CONFIG_DVB_USB_AF9015=m > CONFIG_DVB_USB_AF9035=m > CONFIG_DVB_USB_ANYSEE=m > CONFIG_DVB_USB_AU6610=m > CONFIG_DVB_USB_AZ6007=m > CONFIG_DVB_USB_CE6230=m > # CONFIG_DVB_USB_DVBSKY is not set > CONFIG_DVB_USB_EC168=m > CONFIG_DVB_USB_GL861=m > CONFIG_DVB_USB_LME2510=m > CONFIG_DVB_USB_MXL111SF=m > CONFIG_DVB_USB_RTL28XXU=m > # CONFIG_DVB_USB_ZD1301 is not set > CONFIG_DVB_USB=m > # CONFIG_DVB_USB_DEBUG is not set > CONFIG_DVB_USB_A800=m > CONFIG_DVB_USB_AF9005=m > CONFIG_DVB_USB_AF9005_REMOTE=m > CONFIG_DVB_USB_AZ6027=m > CONFIG_DVB_USB_CINERGY_T2=m > CONFIG_DVB_USB_CXUSB=m > # CONFIG_DVB_USB_CXUSB_ANALOG is not set > CONFIG_DVB_USB_DIB0700=m > CONFIG_DVB_USB_DIB3000MC=m > CONFIG_DVB_USB_DIBUSB_MB=m > CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y > CONFIG_DVB_USB_DIBUSB_MC=m > CONFIG_DVB_USB_DIGITV=m > CONFIG_DVB_USB_DTT200U=m > CONFIG_DVB_USB_DTV5100=m > CONFIG_DVB_USB_DW2102=m > CONFIG_DVB_USB_GP8PSK=m > CONFIG_DVB_USB_M920X=m > CONFIG_DVB_USB_NOVA_T_USB2=m > CONFIG_DVB_USB_OPERA1=m > CONFIG_DVB_USB_PCTV452E=m > CONFIG_DVB_USB_TECHNISAT_USB2=m > CONFIG_DVB_USB_TTUSB2=m > CONFIG_DVB_USB_UMT_010=m > CONFIG_DVB_USB_VP702X=m > CONFIG_DVB_USB_VP7045=m > CONFIG_SMS_USB_DRV=m > CONFIG_DVB_TTUSB_BUDGET=m > CONFIG_DVB_TTUSB_DEC=m > > # > # Webcam, TV (analog/digital) USB devices > # > CONFIG_VIDEO_EM28XX=m > CONFIG_VIDEO_EM28XX_V4L2=m > CONFIG_VIDEO_EM28XX_ALSA=m > CONFIG_VIDEO_EM28XX_DVB=m > CONFIG_VIDEO_EM28XX_RC=m > > # > # Software defined radio USB devices > # > # CONFIG_USB_AIRSPY is not set > # CONFIG_USB_HACKRF is not set > # CONFIG_USB_MSI2500 is not set > CONFIG_MEDIA_PCI_SUPPORT=y > > # > # Media capture support > # > # CONFIG_VIDEO_SOLO6X10 is not set > # CONFIG_VIDEO_TW5864 is not set > # CONFIG_VIDEO_TW68 is not set > # CONFIG_VIDEO_TW686X is not set > CONFIG_VIDEO_ZORAN=m > # CONFIG_VIDEO_ZORAN_DC30 is not set > # CONFIG_VIDEO_ZORAN_ZR36060 is not set > > # > # Media capture/analog TV support > # > # CONFIG_VIDEO_DT3155 is not set > CONFIG_VIDEO_IVTV=m > CONFIG_VIDEO_IVTV_ALSA=m > CONFIG_VIDEO_FB_IVTV=m > CONFIG_VIDEO_HEXIUM_GEMINI=m > CONFIG_VIDEO_HEXIUM_ORION=m > CONFIG_VIDEO_MXB=m > > # > # Media capture/analog/hybrid TV support > # > CONFIG_VIDEO_BT848=m > CONFIG_DVB_BT8XX=m > CONFIG_VIDEO_CX18=m > CONFIG_VIDEO_CX18_ALSA=m > CONFIG_VIDEO_CX23885=m > CONFIG_MEDIA_ALTERA_CI=m > # CONFIG_VIDEO_CX25821 is not set > CONFIG_VIDEO_CX88=m > CONFIG_VIDEO_CX88_ALSA=m > CONFIG_VIDEO_CX88_BLACKBIRD=m > CONFIG_VIDEO_CX88_DVB=m > CONFIG_VIDEO_CX88_ENABLE_VP3054=y > CONFIG_VIDEO_CX88_VP3054=m > CONFIG_VIDEO_CX88_MPEG=m > CONFIG_VIDEO_SAA7134=m > CONFIG_VIDEO_SAA7134_ALSA=m > CONFIG_VIDEO_SAA7134_RC=y > CONFIG_VIDEO_SAA7134_DVB=m > CONFIG_VIDEO_SAA7164=m > > # > # Media digital TV PCI Adapters > # > CONFIG_DVB_B2C2_FLEXCOP_PCI=m > # CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set > CONFIG_DVB_DDBRIDGE=m > # CONFIG_DVB_DDBRIDGE_MSIENABLE is not set > CONFIG_DVB_DM1105=m > CONFIG_MANTIS_CORE=m > CONFIG_DVB_MANTIS=m > CONFIG_DVB_HOPPER=m > # CONFIG_DVB_NETUP_UNIDVB is not set > CONFIG_DVB_NGENE=m > CONFIG_DVB_PLUTO2=m > CONFIG_DVB_PT1=m > # CONFIG_DVB_PT3 is not set > # CONFIG_DVB_SMIPCIE is not set > CONFIG_DVB_BUDGET_CORE=m > CONFIG_DVB_BUDGET=m > CONFIG_DVB_BUDGET_CI=m > CONFIG_DVB_BUDGET_AV=m > CONFIG_RADIO_ADAPTERS=m > CONFIG_RADIO_MAXIRADIO=m > # CONFIG_RADIO_SAA7706H is not set > CONFIG_RADIO_SHARK=m > CONFIG_RADIO_SHARK2=m > # CONFIG_RADIO_SI4713 is not set > CONFIG_RADIO_TEA575X=m > # CONFIG_RADIO_TEA5764 is not set > # CONFIG_RADIO_TEF6862 is not set > # CONFIG_RADIO_WL1273 is not set > CONFIG_USB_DSBR=m > CONFIG_USB_KEENE=m > CONFIG_USB_MA901=m > CONFIG_USB_MR800=m > CONFIG_USB_RAREMONO=m > CONFIG_RADIO_SI470X=m > CONFIG_USB_SI470X=m > # CONFIG_I2C_SI470X is not set > CONFIG_MEDIA_PLATFORM_DRIVERS=y > CONFIG_V4L_PLATFORM_DRIVERS=y > # CONFIG_SDR_PLATFORM_DRIVERS is not set > # CONFIG_DVB_PLATFORM_DRIVERS is not set > CONFIG_V4L_MEM2MEM_DRIVERS=y > # CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set > # CONFIG_VIDEO_MUX is not set > > # > # Allegro DVT media platform drivers > # > > # > # Amlogic media platform drivers > # > > # > # Amphion drivers > # > > # > # Aspeed media platform drivers > # > > # > # Atmel media platform drivers > # > > # > # Cadence media platform drivers > # > # CONFIG_VIDEO_CADENCE_CSI2RX is not set > # CONFIG_VIDEO_CADENCE_CSI2TX is not set > > # > # Chips&Media media platform drivers > # > > # > # Intel media platform drivers > # > > # > # Marvell media platform drivers > # > CONFIG_VIDEO_CAFE_CCIC=m > > # > # Mediatek media platform drivers > # > > # > # Microchip Technology, Inc. media platform drivers > # > > # > # NVidia media platform drivers > # > > # > # NXP media platform drivers > # > > # > # Qualcomm media platform drivers > # > > # > # Renesas media platform drivers > # > > # > # Rockchip media platform drivers > # > > # > # Samsung media platform drivers > # > > # > # STMicroelectronics media platform drivers > # > > # > # Sunxi media platform drivers > # > > # > # Texas Instruments drivers > # > > # > # Verisilicon media platform drivers > # > > # > # VIA media platform drivers > # > > # > # Xilinx media platform drivers > # > # CONFIG_VIDEO_XILINX is not set > > # > # MMC/SDIO DVB adapters > # > CONFIG_SMS_SDIO_DRV=m > CONFIG_V4L_TEST_DRIVERS=y > # CONFIG_VIDEO_VIM2M is not set > # CONFIG_VIDEO_VICODEC is not set > # CONFIG_VIDEO_VIMC is not set > # CONFIG_VIDEO_VIVID is not set > # CONFIG_VIDEO_VISL is not set > # CONFIG_DVB_TEST_DRIVERS is not set > > # > # FireWire (IEEE 1394) Adapters > # > CONFIG_DVB_FIREDTV=m > CONFIG_DVB_FIREDTV_INPUT=y > CONFIG_MEDIA_COMMON_OPTIONS=y > > # > # common driver options > # > CONFIG_CYPRESS_FIRMWARE=m > CONFIG_TTPCI_EEPROM=m > CONFIG_UVC_COMMON=m > CONFIG_VIDEO_CX2341X=m > CONFIG_VIDEO_TVEEPROM=m > CONFIG_DVB_B2C2_FLEXCOP=m > CONFIG_VIDEO_SAA7146=m > CONFIG_VIDEO_SAA7146_VV=m > CONFIG_SMS_SIANO_MDTV=m > CONFIG_SMS_SIANO_RC=y > # CONFIG_SMS_SIANO_DEBUGFS is not set > CONFIG_VIDEOBUF2_CORE=m > CONFIG_VIDEOBUF2_V4L2=m > CONFIG_VIDEOBUF2_MEMOPS=m > CONFIG_VIDEOBUF2_DMA_CONTIG=m > CONFIG_VIDEOBUF2_VMALLOC=m > CONFIG_VIDEOBUF2_DMA_SG=m > CONFIG_VIDEOBUF2_DVB=m > # end of Media drivers > > # > # Media ancillary drivers > # > CONFIG_MEDIA_ATTACH=y > > # > # IR I2C driver auto-selected by 'Autoselect ancillary drivers' > # > CONFIG_VIDEO_IR_I2C=m > > # > # Camera sensor devices > # > # CONFIG_VIDEO_AR0521 is not set > # CONFIG_VIDEO_HI556 is not set > # CONFIG_VIDEO_HI846 is not set > # CONFIG_VIDEO_HI847 is not set > # CONFIG_VIDEO_IMX208 is not set > # CONFIG_VIDEO_IMX214 is not set > # CONFIG_VIDEO_IMX219 is not set > # CONFIG_VIDEO_IMX258 is not set > # CONFIG_VIDEO_IMX274 is not set > # CONFIG_VIDEO_IMX290 is not set > # CONFIG_VIDEO_IMX296 is not set > # CONFIG_VIDEO_IMX319 is not set > # CONFIG_VIDEO_IMX334 is not set > # CONFIG_VIDEO_IMX335 is not set > # CONFIG_VIDEO_IMX355 is not set > # CONFIG_VIDEO_IMX412 is not set > # CONFIG_VIDEO_IMX415 is not set > # CONFIG_VIDEO_MT9M001 is not set > # CONFIG_VIDEO_MT9M111 is not set > # CONFIG_VIDEO_MT9P031 is not set > # CONFIG_VIDEO_MT9T112 is not set > CONFIG_VIDEO_MT9V011=m > # CONFIG_VIDEO_MT9V032 is not set > # CONFIG_VIDEO_MT9V111 is not set > # CONFIG_VIDEO_OG01A1B is not set > # CONFIG_VIDEO_OV01A10 is not set > # CONFIG_VIDEO_OV02A10 is not set > # CONFIG_VIDEO_OV08D10 is not set > # CONFIG_VIDEO_OV08X40 is not set > # CONFIG_VIDEO_OV13858 is not set > # CONFIG_VIDEO_OV13B10 is not set > CONFIG_VIDEO_OV2640=m > # CONFIG_VIDEO_OV2659 is not set > # CONFIG_VIDEO_OV2680 is not set > # CONFIG_VIDEO_OV2685 is not set > # CONFIG_VIDEO_OV4689 is not set > # CONFIG_VIDEO_OV5640 is not set > # CONFIG_VIDEO_OV5645 is not set > # CONFIG_VIDEO_OV5647 is not set > # CONFIG_VIDEO_OV5648 is not set > # CONFIG_VIDEO_OV5670 is not set > # CONFIG_VIDEO_OV5675 is not set > # CONFIG_VIDEO_OV5693 is not set > # CONFIG_VIDEO_OV5695 is not set > # CONFIG_VIDEO_OV6650 is not set > # CONFIG_VIDEO_OV7251 is not set > # CONFIG_VIDEO_OV7640 is not set > CONFIG_VIDEO_OV7670=m > # CONFIG_VIDEO_OV772X is not set > # CONFIG_VIDEO_OV7740 is not set > # CONFIG_VIDEO_OV8856 is not set > # CONFIG_VIDEO_OV8858 is not set > # CONFIG_VIDEO_OV8865 is not set > # CONFIG_VIDEO_OV9282 is not set > # CONFIG_VIDEO_OV9640 is not set > # CONFIG_VIDEO_OV9650 is not set > # CONFIG_VIDEO_RDACM20 is not set > # CONFIG_VIDEO_RDACM21 is not set > # CONFIG_VIDEO_RJ54N1 is not set > # CONFIG_VIDEO_S5C73M3 is not set > # CONFIG_VIDEO_S5K5BAF is not set > # CONFIG_VIDEO_S5K6A3 is not set > # CONFIG_VIDEO_ST_VGXY61 is not set > # CONFIG_VIDEO_CCS is not set > # CONFIG_VIDEO_ET8EK8 is not set > # end of Camera sensor devices > > # > # Lens drivers > # > # CONFIG_VIDEO_AD5820 is not set > # CONFIG_VIDEO_AK7375 is not set > # CONFIG_VIDEO_DW9714 is not set > # CONFIG_VIDEO_DW9768 is not set > # CONFIG_VIDEO_DW9807_VCM is not set > # end of Lens drivers > > # > # Flash devices > # > # CONFIG_VIDEO_ADP1653 is not set > # CONFIG_VIDEO_LM3560 is not set > # CONFIG_VIDEO_LM3646 is not set > # end of Flash devices > > # > # Audio decoders, processors and mixers > # > CONFIG_VIDEO_CS3308=m > CONFIG_VIDEO_CS5345=m > CONFIG_VIDEO_CS53L32A=m > CONFIG_VIDEO_MSP3400=m > # CONFIG_VIDEO_SONY_BTF_MPX is not set > CONFIG_VIDEO_TDA7432=m > CONFIG_VIDEO_TDA9840=m > CONFIG_VIDEO_TEA6415C=m > CONFIG_VIDEO_TEA6420=m > # CONFIG_VIDEO_TLV320AIC23B is not set > CONFIG_VIDEO_TVAUDIO=m > # CONFIG_VIDEO_UDA1342 is not set > CONFIG_VIDEO_VP27SMPX=m > CONFIG_VIDEO_WM8739=m > CONFIG_VIDEO_WM8775=m > # end of Audio decoders, processors and mixers > > # > # RDS decoders > # > CONFIG_VIDEO_SAA6588=m > # end of RDS decoders > > # > # Video decoders > # > # CONFIG_VIDEO_ADV7180 is not set > # CONFIG_VIDEO_ADV7183 is not set > # CONFIG_VIDEO_ADV748X is not set > # CONFIG_VIDEO_ADV7604 is not set > # CONFIG_VIDEO_ADV7842 is not set > CONFIG_VIDEO_BT819=m > CONFIG_VIDEO_BT856=m > CONFIG_VIDEO_BT866=m > # CONFIG_VIDEO_ISL7998X is not set > CONFIG_VIDEO_KS0127=m > # CONFIG_VIDEO_MAX9286 is not set > # CONFIG_VIDEO_ML86V7667 is not set > CONFIG_VIDEO_SAA7110=m > CONFIG_VIDEO_SAA711X=m > # CONFIG_VIDEO_TC358743 is not set > # CONFIG_VIDEO_TC358746 is not set > # CONFIG_VIDEO_TVP514X is not set > CONFIG_VIDEO_TVP5150=m > # CONFIG_VIDEO_TVP7002 is not set > # CONFIG_VIDEO_TW2804 is not set > # CONFIG_VIDEO_TW9903 is not set > # CONFIG_VIDEO_TW9906 is not set > # CONFIG_VIDEO_TW9910 is not set > CONFIG_VIDEO_VPX3220=m > > # > # Video and audio decoders > # > CONFIG_VIDEO_SAA717X=m > CONFIG_VIDEO_CX25840=m > # end of Video decoders > > # > # Video encoders > # > CONFIG_VIDEO_ADV7170=m > CONFIG_VIDEO_ADV7175=m > # CONFIG_VIDEO_ADV7343 is not set > # CONFIG_VIDEO_ADV7393 is not set > # CONFIG_VIDEO_ADV7511 is not set > # CONFIG_VIDEO_AK881X is not set > CONFIG_VIDEO_SAA7127=m > CONFIG_VIDEO_SAA7185=m > # CONFIG_VIDEO_THS8200 is not set > # end of Video encoders > > # > # Video improvement chips > # > CONFIG_VIDEO_UPD64031A=m > CONFIG_VIDEO_UPD64083=m > # end of Video improvement chips > > # > # Audio/Video compression chips > # > CONFIG_VIDEO_SAA6752HS=m > # end of Audio/Video compression chips > > # > # SDR tuner chips > # > # CONFIG_SDR_MAX2175 is not set > # end of SDR tuner chips > > # > # Miscellaneous helper chips > # > # CONFIG_VIDEO_I2C is not set > CONFIG_VIDEO_M52790=m > # CONFIG_VIDEO_ST_MIPID02 is not set > # CONFIG_VIDEO_THS7303 is not set > # end of Miscellaneous helper chips > > # > # Media SPI Adapters > # > # CONFIG_CXD2880_SPI_DRV is not set > # CONFIG_VIDEO_GS1662 is not set > # end of Media SPI Adapters > > CONFIG_MEDIA_TUNER=m > > # > # Customize TV tuners > # > CONFIG_MEDIA_TUNER_E4000=m > CONFIG_MEDIA_TUNER_FC0011=m > CONFIG_MEDIA_TUNER_FC0012=m > CONFIG_MEDIA_TUNER_FC0013=m > CONFIG_MEDIA_TUNER_FC2580=m > CONFIG_MEDIA_TUNER_IT913X=m > CONFIG_MEDIA_TUNER_M88RS6000T=m > CONFIG_MEDIA_TUNER_MAX2165=m > CONFIG_MEDIA_TUNER_MC44S803=m > # CONFIG_MEDIA_TUNER_MSI001 is not set > CONFIG_MEDIA_TUNER_MT2060=m > CONFIG_MEDIA_TUNER_MT2063=m > CONFIG_MEDIA_TUNER_MT20XX=m > CONFIG_MEDIA_TUNER_MT2131=m > CONFIG_MEDIA_TUNER_MT2266=m > # CONFIG_MEDIA_TUNER_MXL301RF is not set > CONFIG_MEDIA_TUNER_MXL5005S=m > CONFIG_MEDIA_TUNER_MXL5007T=m > CONFIG_MEDIA_TUNER_QM1D1B0004=m > CONFIG_MEDIA_TUNER_QM1D1C0042=m > CONFIG_MEDIA_TUNER_QT1010=m > CONFIG_MEDIA_TUNER_R820T=m > CONFIG_MEDIA_TUNER_SI2157=m > CONFIG_MEDIA_TUNER_SIMPLE=m > CONFIG_MEDIA_TUNER_TDA18212=m > CONFIG_MEDIA_TUNER_TDA18218=m > CONFIG_MEDIA_TUNER_TDA18250=m > CONFIG_MEDIA_TUNER_TDA18271=m > CONFIG_MEDIA_TUNER_TDA827X=m > CONFIG_MEDIA_TUNER_TDA8290=m > CONFIG_MEDIA_TUNER_TDA9887=m > CONFIG_MEDIA_TUNER_TEA5761=m > CONFIG_MEDIA_TUNER_TEA5767=m > CONFIG_MEDIA_TUNER_TUA9001=m > CONFIG_MEDIA_TUNER_XC2028=m > CONFIG_MEDIA_TUNER_XC4000=m > CONFIG_MEDIA_TUNER_XC5000=m > # end of Customize TV tuners > > # > # Customise DVB Frontends > # > > # > # Multistandard (satellite) frontends > # > CONFIG_DVB_M88DS3103=m > CONFIG_DVB_MXL5XX=m > CONFIG_DVB_STB0899=m > CONFIG_DVB_STB6100=m > CONFIG_DVB_STV090x=m > CONFIG_DVB_STV0910=m > CONFIG_DVB_STV6110x=m > CONFIG_DVB_STV6111=m > > # > # Multistandard (cable + terrestrial) frontends > # > CONFIG_DVB_DRXK=m > CONFIG_DVB_MN88472=m > CONFIG_DVB_MN88473=m > CONFIG_DVB_SI2165=m > CONFIG_DVB_TDA18271C2DD=m > > # > # DVB-S (satellite) frontends > # > CONFIG_DVB_CX24110=m > CONFIG_DVB_CX24116=m > CONFIG_DVB_CX24117=m > CONFIG_DVB_CX24120=m > CONFIG_DVB_CX24123=m > CONFIG_DVB_DS3000=m > CONFIG_DVB_MB86A16=m > CONFIG_DVB_MT312=m > CONFIG_DVB_S5H1420=m > CONFIG_DVB_SI21XX=m > CONFIG_DVB_STB6000=m > CONFIG_DVB_STV0288=m > CONFIG_DVB_STV0299=m > CONFIG_DVB_STV0900=m > CONFIG_DVB_STV6110=m > CONFIG_DVB_TDA10071=m > CONFIG_DVB_TDA10086=m > CONFIG_DVB_TDA8083=m > CONFIG_DVB_TDA8261=m > CONFIG_DVB_TDA826X=m > CONFIG_DVB_TS2020=m > CONFIG_DVB_TUA6100=m > CONFIG_DVB_TUNER_CX24113=m > CONFIG_DVB_TUNER_ITD1000=m > CONFIG_DVB_VES1X93=m > CONFIG_DVB_ZL10036=m > CONFIG_DVB_ZL10039=m > > # > # DVB-T (terrestrial) frontends > # > CONFIG_DVB_AF9013=m > CONFIG_DVB_CX22700=m > CONFIG_DVB_CX22702=m > CONFIG_DVB_CXD2820R=m > CONFIG_DVB_CXD2841ER=m > CONFIG_DVB_DIB3000MB=m > CONFIG_DVB_DIB3000MC=m > CONFIG_DVB_DIB7000M=m > CONFIG_DVB_DIB7000P=m > # CONFIG_DVB_DIB9000 is not set > CONFIG_DVB_DRXD=m > CONFIG_DVB_EC100=m > CONFIG_DVB_GP8PSK_FE=m > CONFIG_DVB_L64781=m > CONFIG_DVB_MT352=m > CONFIG_DVB_NXT6000=m > CONFIG_DVB_RTL2830=m > CONFIG_DVB_RTL2832=m > CONFIG_DVB_RTL2832_SDR=m > # CONFIG_DVB_S5H1432 is not set > CONFIG_DVB_SI2168=m > CONFIG_DVB_SP887X=m > CONFIG_DVB_STV0367=m > CONFIG_DVB_TDA10048=m > CONFIG_DVB_TDA1004X=m > # CONFIG_DVB_ZD1301_DEMOD is not set > CONFIG_DVB_ZL10353=m > # CONFIG_DVB_CXD2880 is not set > > # > # DVB-C (cable) frontends > # > CONFIG_DVB_STV0297=m > CONFIG_DVB_TDA10021=m > CONFIG_DVB_TDA10023=m > CONFIG_DVB_VES1820=m > > # > # ATSC (North American/Korean Terrestrial/Cable DTV) frontends > # > CONFIG_DVB_AU8522=m > CONFIG_DVB_AU8522_DTV=m > CONFIG_DVB_AU8522_V4L=m > CONFIG_DVB_BCM3510=m > CONFIG_DVB_LG2160=m > CONFIG_DVB_LGDT3305=m > CONFIG_DVB_LGDT3306A=m > CONFIG_DVB_LGDT330X=m > CONFIG_DVB_MXL692=m > CONFIG_DVB_NXT200X=m > CONFIG_DVB_OR51132=m > CONFIG_DVB_OR51211=m > CONFIG_DVB_S5H1409=m > CONFIG_DVB_S5H1411=m > > # > # ISDB-T (terrestrial) frontends > # > CONFIG_DVB_DIB8000=m > CONFIG_DVB_MB86A20S=m > CONFIG_DVB_S921=m > > # > # ISDB-S (satellite) & ISDB-T (terrestrial) frontends > # > # CONFIG_DVB_MN88443X is not set > CONFIG_DVB_TC90522=m > > # > # Digital terrestrial only tuners/PLL > # > CONFIG_DVB_PLL=m > CONFIG_DVB_TUNER_DIB0070=m > CONFIG_DVB_TUNER_DIB0090=m > > # > # SEC control devices for DVB-S > # > CONFIG_DVB_A8293=m > CONFIG_DVB_AF9033=m > # CONFIG_DVB_ASCOT2E is not set > CONFIG_DVB_ATBM8830=m > # CONFIG_DVB_HELENE is not set > # CONFIG_DVB_HORUS3A is not set > CONFIG_DVB_ISL6405=m > CONFIG_DVB_ISL6421=m > CONFIG_DVB_ISL6423=m > CONFIG_DVB_IX2505V=m > # CONFIG_DVB_LGS8GL5 is not set > CONFIG_DVB_LGS8GXX=m > CONFIG_DVB_LNBH25=m > # CONFIG_DVB_LNBH29 is not set > CONFIG_DVB_LNBP21=m > CONFIG_DVB_LNBP22=m > CONFIG_DVB_M88RS2000=m > CONFIG_DVB_TDA665x=m > CONFIG_DVB_DRX39XYJ=m > > # > # Common Interface (EN50221) controller drivers > # > CONFIG_DVB_CXD2099=m > # CONFIG_DVB_SP2 is not set > # end of Customise DVB Frontends > > # > # Tools to develop new frontends > # > # CONFIG_DVB_DUMMY_FE is not set > # end of Media ancillary drivers > > # > # Graphics support > # > CONFIG_APERTURE_HELPERS=y > CONFIG_VIDEO_CMDLINE=y > CONFIG_VIDEO_NOMODESET=y > CONFIG_AGP=y > CONFIG_AGP_UNINORTH=y > CONFIG_DRM=m > CONFIG_DRM_KMS_HELPER=m > # CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set > # CONFIG_DRM_DEBUG_MODESET_LOCK is not set > CONFIG_DRM_FBDEV_EMULATION=y > CONFIG_DRM_FBDEV_OVERALLOC=100 > # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set > CONFIG_DRM_LOAD_EDID_FIRMWARE=y > CONFIG_DRM_DISPLAY_HELPER=m > CONFIG_DRM_DISPLAY_DP_HELPER=y > CONFIG_DRM_DISPLAY_HDMI_HELPER=y > # CONFIG_DRM_DP_AUX_CHARDEV is not set > # CONFIG_DRM_DP_CEC is not set > CONFIG_DRM_TTM=m > CONFIG_DRM_VRAM_HELPER=m > CONFIG_DRM_TTM_HELPER=m > CONFIG_DRM_GEM_SHMEM_HELPER=m > CONFIG_DRM_SUBALLOC_HELPER=m > > # > # I2C encoder or helper chips > # > CONFIG_DRM_I2C_CH7006=m > CONFIG_DRM_I2C_SIL164=m > # CONFIG_DRM_I2C_NXP_TDA998X is not set > # CONFIG_DRM_I2C_NXP_TDA9950 is not set > # end of I2C encoder or helper chips > > # > # ARM devices > # > # CONFIG_DRM_KOMEDA is not set > # end of ARM devices > > CONFIG_DRM_RADEON=m > # CONFIG_DRM_RADEON_USERPTR is not set > # CONFIG_DRM_AMDGPU is not set > CONFIG_DRM_NOUVEAU=m > CONFIG_NOUVEAU_DEBUG=5 > CONFIG_NOUVEAU_DEBUG_DEFAULT=3 > # CONFIG_NOUVEAU_DEBUG_MMU is not set > # CONFIG_NOUVEAU_DEBUG_PUSH is not set > CONFIG_DRM_NOUVEAU_BACKLIGHT=y > # CONFIG_DRM_VGEM is not set > # CONFIG_DRM_VKMS is not set > CONFIG_DRM_UDL=m > # CONFIG_DRM_AST is not set > # CONFIG_DRM_MGAG200 is not set > CONFIG_DRM_QXL=m > # CONFIG_DRM_VIRTIO_GPU is not set > CONFIG_DRM_PANEL=y > > # > # Display Panels > # > # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set > # CONFIG_DRM_PANEL_AUO_A030JTN01 is not set > # CONFIG_DRM_PANEL_LVDS is not set > # CONFIG_DRM_PANEL_SIMPLE is not set > # CONFIG_DRM_PANEL_EDP is not set > # CONFIG_DRM_PANEL_ILITEK_IL9322 is not set > # CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set > # CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set > # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set > # CONFIG_DRM_PANEL_LG_LB035Q02 is not set > # CONFIG_DRM_PANEL_LG_LG4573 is not set > # CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set > # CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set > # CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set > # CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set > # CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set > # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set > # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set > # CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set > # CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set > # CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set > # CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set > # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set > # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set > # CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set > # CONFIG_DRM_PANEL_SONY_ACX565AKM is not set > # CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set > # CONFIG_DRM_PANEL_TPO_TPG110 is not set > # CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set > # end of Display Panels > > CONFIG_DRM_BRIDGE=y > CONFIG_DRM_PANEL_BRIDGE=y > > # > # Display Interface Bridges > # > # CONFIG_DRM_CHIPONE_ICN6211 is not set > # CONFIG_DRM_CHRONTEL_CH7033 is not set > # CONFIG_DRM_DISPLAY_CONNECTOR is not set > # CONFIG_DRM_ITE_IT6505 is not set > # CONFIG_DRM_LONTIUM_LT8912B is not set > # CONFIG_DRM_LONTIUM_LT9211 is not set > # CONFIG_DRM_LONTIUM_LT9611 is not set > # CONFIG_DRM_LONTIUM_LT9611UXC is not set > # CONFIG_DRM_ITE_IT66121 is not set > # CONFIG_DRM_LVDS_CODEC is not set > # CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set > # CONFIG_DRM_NWL_MIPI_DSI is not set > # CONFIG_DRM_NXP_PTN3460 is not set > # CONFIG_DRM_PARADE_PS8622 is not set > # CONFIG_DRM_PARADE_PS8640 is not set > # CONFIG_DRM_SAMSUNG_DSIM is not set > # CONFIG_DRM_SIL_SII8620 is not set > # CONFIG_DRM_SII902X is not set > # CONFIG_DRM_SII9234 is not set > # CONFIG_DRM_SIMPLE_BRIDGE is not set > # CONFIG_DRM_THINE_THC63LVD1024 is not set > # CONFIG_DRM_TOSHIBA_TC358762 is not set > # CONFIG_DRM_TOSHIBA_TC358764 is not set > # CONFIG_DRM_TOSHIBA_TC358767 is not set > # CONFIG_DRM_TOSHIBA_TC358768 is not set > # CONFIG_DRM_TOSHIBA_TC358775 is not set > # CONFIG_DRM_TI_DLPC3433 is not set > # CONFIG_DRM_TI_TFP410 is not set > # CONFIG_DRM_TI_SN65DSI83 is not set > # CONFIG_DRM_TI_SN65DSI86 is not set > # CONFIG_DRM_TI_TPD12S015 is not set > # CONFIG_DRM_ANALOGIX_ANX6345 is not set > # CONFIG_DRM_ANALOGIX_ANX78XX is not set > # CONFIG_DRM_ANALOGIX_ANX7625 is not set > # CONFIG_DRM_I2C_ADV7511 is not set > # CONFIG_DRM_CDNS_DSI is not set > # CONFIG_DRM_CDNS_MHDP8546 is not set > # end of Display Interface Bridges > > # CONFIG_DRM_ETNAVIV is not set > # CONFIG_DRM_LOGICVC is not set > # CONFIG_DRM_ARCPGU is not set > CONFIG_DRM_BOCHS=m > CONFIG_DRM_CIRRUS_QEMU=m > # CONFIG_DRM_GM12U320 is not set > # CONFIG_DRM_OFDRM is not set > # CONFIG_DRM_PANEL_MIPI_DBI is not set > # CONFIG_DRM_SIMPLEDRM is not set > # CONFIG_TINYDRM_HX8357D is not set > # CONFIG_TINYDRM_ILI9163 is not set > # CONFIG_TINYDRM_ILI9225 is not set > # CONFIG_TINYDRM_ILI9341 is not set > # CONFIG_TINYDRM_ILI9486 is not set > # CONFIG_TINYDRM_MI0283QT is not set > # CONFIG_TINYDRM_REPAPER is not set > # CONFIG_TINYDRM_ST7586 is not set > # CONFIG_TINYDRM_ST7735R is not set > # CONFIG_DRM_GUD is not set > # CONFIG_DRM_SSD130X is not set > # CONFIG_DRM_LEGACY is not set > CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m > > # > # Frame buffer Devices > # > CONFIG_FB_NOTIFY=y > CONFIG_FB=y > CONFIG_FIRMWARE_EDID=y > CONFIG_FB_DDC=y > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > CONFIG_FB_SYS_FILLRECT=y > CONFIG_FB_SYS_COPYAREA=y > CONFIG_FB_SYS_IMAGEBLIT=y > # CONFIG_FB_FOREIGN_ENDIAN is not set > CONFIG_FB_SYS_FOPS=y > CONFIG_FB_DEFERRED_IO=y > CONFIG_FB_IO_HELPERS=y > CONFIG_FB_SYS_HELPERS=y > CONFIG_FB_SYS_HELPERS_DEFERRED=y > CONFIG_FB_SVGALIB=m > CONFIG_FB_MACMODES=y > CONFIG_FB_BACKLIGHT=y > CONFIG_FB_MODE_HELPERS=y > CONFIG_FB_TILEBLITTING=y > > # > # Frame buffer hardware drivers > # > CONFIG_FB_CIRRUS=m > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > CONFIG_FB_OF=y > CONFIG_FB_CONTROL=y > CONFIG_FB_PLATINUM=y > CONFIG_FB_VALKYRIE=y > CONFIG_FB_CT65550=y > # CONFIG_FB_ASILIANT is not set > CONFIG_FB_IMSTT=y > # CONFIG_FB_VGA16 is not set > # CONFIG_FB_UVESA is not set > # CONFIG_FB_OPENCORES is not set > CONFIG_FB_S1D13XXX=m > # CONFIG_FB_NVIDIA is not set > # CONFIG_FB_RIVA is not set > # CONFIG_FB_I740 is not set > CONFIG_FB_MATROX=y > CONFIG_FB_MATROX_MILLENIUM=y > CONFIG_FB_MATROX_MYSTIQUE=y > CONFIG_FB_MATROX_G=y > CONFIG_FB_MATROX_I2C=m > CONFIG_FB_MATROX_MAVEN=m > CONFIG_FB_RADEON=m > CONFIG_FB_RADEON_I2C=y > CONFIG_FB_RADEON_BACKLIGHT=y > # CONFIG_FB_RADEON_DEBUG is not set > CONFIG_FB_ATY128=y > CONFIG_FB_ATY128_BACKLIGHT=y > CONFIG_FB_ATY=y > CONFIG_FB_ATY_CT=y > CONFIG_FB_ATY_GENERIC_LCD=y > CONFIG_FB_ATY_GX=y > CONFIG_FB_ATY_BACKLIGHT=y > CONFIG_FB_S3=m > CONFIG_FB_S3_DDC=y > CONFIG_FB_SAVAGE=m > CONFIG_FB_SAVAGE_I2C=y > CONFIG_FB_SAVAGE_ACCEL=y > CONFIG_FB_SIS=y > CONFIG_FB_SIS_300=y > CONFIG_FB_SIS_315=y > CONFIG_FB_NEOMAGIC=m > CONFIG_FB_KYRO=m > CONFIG_FB_3DFX=y > # CONFIG_FB_3DFX_ACCEL is not set > CONFIG_FB_3DFX_I2C=y > CONFIG_FB_VOODOO1=y > CONFIG_FB_VT8623=m > CONFIG_FB_TRIDENT=m > CONFIG_FB_ARK=m > CONFIG_FB_PM3=m > # CONFIG_FB_CARMINE is not set > CONFIG_FB_SMSCUFX=m > CONFIG_FB_UDL=m > CONFIG_FB_IBM_GXT4500=m > # CONFIG_FB_VIRTUAL is not set > # CONFIG_FB_METRONOME is not set > CONFIG_FB_MB862XX=m > CONFIG_FB_MB862XX_PCI_GDC=y > # CONFIG_FB_MB862XX_LIME is not set > CONFIG_FB_MB862XX_I2C=y > # CONFIG_FB_SIMPLE is not set > # CONFIG_FB_SSD1307 is not set > # CONFIG_FB_SM712 is not set > # end of Frame buffer Devices > > # > # Backlight & LCD device support > # > # CONFIG_LCD_CLASS_DEVICE is not set > CONFIG_BACKLIGHT_CLASS_DEVICE=y > # CONFIG_BACKLIGHT_KTD253 is not set > # CONFIG_BACKLIGHT_KTZ8866 is not set > # CONFIG_BACKLIGHT_QCOM_WLED is not set > # CONFIG_BACKLIGHT_ADP8860 is not set > # CONFIG_BACKLIGHT_ADP8870 is not set > # CONFIG_BACKLIGHT_LM3639 is not set > # CONFIG_BACKLIGHT_GPIO is not set > # CONFIG_BACKLIGHT_LV5207LP is not set > # CONFIG_BACKLIGHT_BD6107 is not set > # CONFIG_BACKLIGHT_ARCXCNN is not set > # CONFIG_BACKLIGHT_LED is not set > # end of Backlight & LCD device support > > CONFIG_VGASTATE=m > CONFIG_HDMI=y > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_DUMMY_CONSOLE=y > CONFIG_DUMMY_CONSOLE_COLUMNS=80 > CONFIG_DUMMY_CONSOLE_ROWS=25 > CONFIG_FRAMEBUFFER_CONSOLE=y > # CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set > CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > # CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set > # end of Console display driver support > > # CONFIG_LOGO is not set > # end of Graphics support > > # CONFIG_DRM_ACCEL is not set > CONFIG_SOUND=m > CONFIG_SOUND_OSS_CORE=y > # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set > CONFIG_SND=m > CONFIG_SND_TIMER=m > CONFIG_SND_PCM=m > CONFIG_SND_HWDEP=m > CONFIG_SND_SEQ_DEVICE=m > CONFIG_SND_RAWMIDI=m > CONFIG_SND_JACK=y > CONFIG_SND_JACK_INPUT_DEV=y > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=m > CONFIG_SND_PCM_OSS=m > CONFIG_SND_PCM_OSS_PLUGINS=y > CONFIG_SND_PCM_TIMER=y > CONFIG_SND_HRTIMER=m > CONFIG_SND_DYNAMIC_MINORS=y > CONFIG_SND_MAX_CARDS=32 > CONFIG_SND_SUPPORT_OLD_API=y > CONFIG_SND_PROC_FS=y > CONFIG_SND_VERBOSE_PROCFS=y > # CONFIG_SND_VERBOSE_PRINTK is not set > CONFIG_SND_CTL_FAST_LOOKUP=y > # CONFIG_SND_DEBUG is not set > # CONFIG_SND_CTL_INPUT_VALIDATION is not set > CONFIG_SND_VMASTER=y > CONFIG_SND_CTL_LED=m > CONFIG_SND_SEQUENCER=m > CONFIG_SND_SEQ_DUMMY=m > # CONFIG_SND_SEQUENCER_OSS is not set > CONFIG_SND_SEQ_HRTIMER_DEFAULT=y > CONFIG_SND_SEQ_MIDI_EVENT=m > CONFIG_SND_SEQ_MIDI=m > CONFIG_SND_SEQ_MIDI_EMUL=m > CONFIG_SND_SEQ_VIRMIDI=m > # CONFIG_SND_SEQ_UMP is not set > CONFIG_SND_MPU401_UART=m > CONFIG_SND_OPL3_LIB=m > CONFIG_SND_OPL3_LIB_SEQ=m > CONFIG_SND_VX_LIB=m > CONFIG_SND_AC97_CODEC=m > CONFIG_SND_DRIVERS=y > # CONFIG_SND_DUMMY is not set > CONFIG_SND_ALOOP=m > # CONFIG_SND_PCMTEST is not set > CONFIG_SND_VIRMIDI=m > # CONFIG_SND_MTPAV is not set > CONFIG_SND_MTS64=m > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > CONFIG_SND_PORTMAN2X4=m > CONFIG_SND_AC97_POWER_SAVE=y > CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 > CONFIG_SND_SB_COMMON=m > CONFIG_SND_PCI=y > CONFIG_SND_AD1889=m > CONFIG_SND_ALS300=m > CONFIG_SND_ALS4000=m > # CONFIG_SND_ALI5451 is not set > CONFIG_SND_ATIIXP=m > CONFIG_SND_ATIIXP_MODEM=m > CONFIG_SND_AU8810=m > CONFIG_SND_AU8820=m > CONFIG_SND_AU8830=m > # CONFIG_SND_AW2 is not set > CONFIG_SND_AZT3328=m > CONFIG_SND_BT87X=m > # CONFIG_SND_BT87X_OVERCLOCK is not set > CONFIG_SND_CA0106=m > CONFIG_SND_CMIPCI=m > CONFIG_SND_OXYGEN_LIB=m > CONFIG_SND_OXYGEN=m > CONFIG_SND_CS4281=m > CONFIG_SND_CS46XX=m > CONFIG_SND_CS46XX_NEW_DSP=y > CONFIG_SND_CTXFI=m > CONFIG_SND_DARLA20=m > CONFIG_SND_GINA20=m > CONFIG_SND_LAYLA20=m > CONFIG_SND_DARLA24=m > CONFIG_SND_GINA24=m > CONFIG_SND_LAYLA24=m > CONFIG_SND_MONA=m > CONFIG_SND_MIA=m > CONFIG_SND_ECHO3G=m > CONFIG_SND_INDIGO=m > CONFIG_SND_INDIGOIO=m > CONFIG_SND_INDIGODJ=m > CONFIG_SND_INDIGOIOX=m > CONFIG_SND_INDIGODJX=m > CONFIG_SND_EMU10K1=m > CONFIG_SND_EMU10K1_SEQ=m > CONFIG_SND_EMU10K1X=m > CONFIG_SND_ENS1370=m > CONFIG_SND_ENS1371=m > CONFIG_SND_ES1938=m > CONFIG_SND_ES1968=m > CONFIG_SND_ES1968_INPUT=y > CONFIG_SND_ES1968_RADIO=y > CONFIG_SND_FM801=m > CONFIG_SND_FM801_TEA575X_BOOL=y > CONFIG_SND_HDSP=m > CONFIG_SND_HDSPM=m > CONFIG_SND_ICE1712=m > CONFIG_SND_ICE1724=m > # CONFIG_SND_INTEL8X0 is not set > # CONFIG_SND_INTEL8X0M is not set > CONFIG_SND_KORG1212=m > CONFIG_SND_LOLA=m > CONFIG_SND_LX6464ES=m > CONFIG_SND_MAESTRO3=m > CONFIG_SND_MAESTRO3_INPUT=y > CONFIG_SND_MIXART=m > CONFIG_SND_NM256=m > CONFIG_SND_PCXHR=m > CONFIG_SND_RIPTIDE=m > CONFIG_SND_RME32=m > CONFIG_SND_RME96=m > CONFIG_SND_RME9652=m > CONFIG_SND_SONICVIBES=m > CONFIG_SND_TRIDENT=m > CONFIG_SND_VIA82XX=m > CONFIG_SND_VIA82XX_MODEM=m > CONFIG_SND_VIRTUOSO=m > CONFIG_SND_VX222=m > CONFIG_SND_YMFPCI=m > > # > # HD-Audio > # > CONFIG_SND_HDA=m > CONFIG_SND_HDA_GENERIC_LEDS=y > CONFIG_SND_HDA_INTEL=m > CONFIG_SND_HDA_HWDEP=y > CONFIG_SND_HDA_RECONFIG=y > CONFIG_SND_HDA_INPUT_BEEP=y > CONFIG_SND_HDA_INPUT_BEEP_MODE=1 > CONFIG_SND_HDA_PATCH_LOADER=y > CONFIG_SND_HDA_CODEC_REALTEK=m > CONFIG_SND_HDA_CODEC_ANALOG=m > CONFIG_SND_HDA_CODEC_SIGMATEL=m > CONFIG_SND_HDA_CODEC_VIA=m > CONFIG_SND_HDA_CODEC_HDMI=m > CONFIG_SND_HDA_CODEC_CIRRUS=m > # CONFIG_SND_HDA_CODEC_CS8409 is not set > CONFIG_SND_HDA_CODEC_CONEXANT=m > CONFIG_SND_HDA_CODEC_CA0110=m > CONFIG_SND_HDA_CODEC_CA0132=m > CONFIG_SND_HDA_CODEC_CA0132_DSP=y > CONFIG_SND_HDA_CODEC_CMEDIA=m > CONFIG_SND_HDA_CODEC_SI3054=m > CONFIG_SND_HDA_GENERIC=m > CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 > # CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set > # CONFIG_SND_HDA_CTL_DEV_ID is not set > # end of HD-Audio > > CONFIG_SND_HDA_CORE=m > CONFIG_SND_HDA_DSP_LOADER=y > CONFIG_SND_HDA_COMPONENT=y > CONFIG_SND_HDA_PREALLOC_SIZE=64 > CONFIG_SND_INTEL_DSP_CONFIG=m > CONFIG_SND_PPC=y > CONFIG_SND_POWERMAC=m > CONFIG_SND_POWERMAC_AUTO_DRC=y > CONFIG_SND_AOA=m > CONFIG_SND_AOA_FABRIC_LAYOUT=m > CONFIG_SND_AOA_ONYX=m > CONFIG_SND_AOA_TAS=m > CONFIG_SND_AOA_TOONIE=m > CONFIG_SND_AOA_SOUNDBUS=m > CONFIG_SND_AOA_SOUNDBUS_I2S=m > CONFIG_SND_SPI=y > CONFIG_SND_USB=y > CONFIG_SND_USB_AUDIO=m > # CONFIG_SND_USB_AUDIO_MIDI_V2 is not set > CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y > CONFIG_SND_USB_UA101=m > CONFIG_SND_USB_USX2Y=m > CONFIG_SND_USB_CAIAQ=m > CONFIG_SND_USB_CAIAQ_INPUT=y > CONFIG_SND_USB_6FIRE=m > CONFIG_SND_USB_HIFACE=m > CONFIG_SND_BCD2000=m > # CONFIG_SND_USB_POD is not set > # CONFIG_SND_USB_PODHD is not set > # CONFIG_SND_USB_TONEPORT is not set > # CONFIG_SND_USB_VARIAX is not set > CONFIG_SND_FIREWIRE=y > CONFIG_SND_FIREWIRE_LIB=m > CONFIG_SND_DICE=m > # CONFIG_SND_OXFW is not set > CONFIG_SND_ISIGHT=m > CONFIG_SND_FIREWORKS=m > CONFIG_SND_BEBOB=m > # CONFIG_SND_FIREWIRE_DIGI00X is not set > # CONFIG_SND_FIREWIRE_TASCAM is not set > # CONFIG_SND_FIREWIRE_MOTU is not set > # CONFIG_SND_FIREFACE is not set > CONFIG_SND_PCMCIA=y > CONFIG_SND_VXPOCKET=m > CONFIG_SND_PDAUDIOCF=m > # CONFIG_SND_SOC is not set > CONFIG_SND_SYNTH_EMUX=m > # CONFIG_SND_VIRTIO is not set > CONFIG_AC97_BUS=m > CONFIG_HID_SUPPORT=y > CONFIG_HID=m > # CONFIG_HID_BATTERY_STRENGTH is not set > CONFIG_HIDRAW=y > CONFIG_UHID=m > CONFIG_HID_GENERIC=m > > # > # Special HID drivers > # > CONFIG_HID_A4TECH=m > # CONFIG_HID_ACCUTOUCH is not set > CONFIG_HID_ACRUX=m > CONFIG_HID_ACRUX_FF=y > CONFIG_HID_APPLE=m > CONFIG_HID_APPLEIR=m > # CONFIG_HID_ASUS is not set > CONFIG_HID_AUREAL=m > CONFIG_HID_BELKIN=m > # CONFIG_HID_BETOP_FF is not set > # CONFIG_HID_BIGBEN_FF is not set > CONFIG_HID_CHERRY=m > CONFIG_HID_CHICONY=m > # CONFIG_HID_CORSAIR is not set > # CONFIG_HID_COUGAR is not set > # CONFIG_HID_MACALLY is not set > CONFIG_HID_PRODIKEYS=m > # CONFIG_HID_CMEDIA is not set > # CONFIG_HID_CP2112 is not set > # CONFIG_HID_CREATIVE_SB0540 is not set > CONFIG_HID_CYPRESS=m > CONFIG_HID_DRAGONRISE=m > CONFIG_DRAGONRISE_FF=y > CONFIG_HID_EMS_FF=m > # CONFIG_HID_ELAN is not set > CONFIG_HID_ELECOM=m > CONFIG_HID_ELO=m > # CONFIG_HID_EVISION is not set > CONFIG_HID_EZKEY=m > # CONFIG_HID_FT260 is not set > # CONFIG_HID_GEMBIRD is not set > # CONFIG_HID_GFRM is not set > # CONFIG_HID_GLORIOUS is not set > CONFIG_HID_HOLTEK=m > CONFIG_HOLTEK_FF=y > # CONFIG_HID_VIVALDI is not set > # CONFIG_HID_GT683R is not set > CONFIG_HID_KEYTOUCH=m > CONFIG_HID_KYE=m > CONFIG_HID_UCLOGIC=m > CONFIG_HID_WALTOP=m > # CONFIG_HID_VIEWSONIC is not set > # CONFIG_HID_VRC2 is not set > # CONFIG_HID_XIAOMI is not set > CONFIG_HID_GYRATION=m > CONFIG_HID_ICADE=m > # CONFIG_HID_ITE is not set > # CONFIG_HID_JABRA is not set > CONFIG_HID_TWINHAN=m > CONFIG_HID_KENSINGTON=m > CONFIG_HID_LCPOWER=m > CONFIG_HID_LED=m > # CONFIG_HID_LENOVO is not set > # CONFIG_HID_LETSKETCH is not set > CONFIG_HID_LOGITECH=m > CONFIG_HID_LOGITECH_DJ=m > CONFIG_HID_LOGITECH_HIDPP=m > CONFIG_LOGITECH_FF=y > CONFIG_LOGIRUMBLEPAD2_FF=y > CONFIG_LOGIG940_FF=y > CONFIG_LOGIWHEELS_FF=y > CONFIG_HID_MAGICMOUSE=m > # CONFIG_HID_MALTRON is not set > # CONFIG_HID_MAYFLASH is not set > # CONFIG_HID_MEGAWORLD_FF is not set > # CONFIG_HID_REDRAGON is not set > CONFIG_HID_MICROSOFT=m > CONFIG_HID_MONTEREY=m > CONFIG_HID_MULTITOUCH=m > # CONFIG_HID_NINTENDO is not set > # CONFIG_HID_NTI is not set > CONFIG_HID_NTRIG=m > # CONFIG_HID_NVIDIA_SHIELD is not set > CONFIG_HID_ORTEK=m > CONFIG_HID_PANTHERLORD=m > CONFIG_PANTHERLORD_FF=y > # CONFIG_HID_PENMOUNT is not set > CONFIG_HID_PETALYNX=m > CONFIG_HID_PICOLCD=m > CONFIG_HID_PICOLCD_FB=y > CONFIG_HID_PICOLCD_BACKLIGHT=y > CONFIG_HID_PICOLCD_LEDS=y > CONFIG_HID_PICOLCD_CIR=y > # CONFIG_HID_PLANTRONICS is not set > # CONFIG_HID_PXRC is not set > # CONFIG_HID_RAZER is not set > CONFIG_HID_PRIMAX=m > # CONFIG_HID_RETRODE is not set > CONFIG_HID_ROCCAT=m > CONFIG_HID_SAITEK=m > CONFIG_HID_SAMSUNG=m > # CONFIG_HID_SEMITEK is not set > # CONFIG_HID_SIGMAMICRO is not set > CONFIG_HID_SONY=m > CONFIG_SONY_FF=y > CONFIG_HID_SPEEDLINK=m > # CONFIG_HID_STEAM is not set > CONFIG_HID_STEELSERIES=m > CONFIG_HID_SUNPLUS=m > CONFIG_HID_RMI=m > CONFIG_HID_GREENASIA=m > CONFIG_GREENASIA_FF=y > CONFIG_HID_SMARTJOYPLUS=m > CONFIG_SMARTJOYPLUS_FF=y > CONFIG_HID_TIVO=m > CONFIG_HID_TOPSEED=m > # CONFIG_HID_TOPRE is not set > CONFIG_HID_THINGM=m > CONFIG_HID_THRUSTMASTER=m > CONFIG_THRUSTMASTER_FF=y > # CONFIG_HID_UDRAW_PS3 is not set > # CONFIG_HID_U2FZERO is not set > CONFIG_HID_WACOM=m > CONFIG_HID_WIIMOTE=m > CONFIG_HID_XINMO=m > CONFIG_HID_ZEROPLUS=m > CONFIG_ZEROPLUS_FF=y > CONFIG_HID_ZYDACRON=m > CONFIG_HID_SENSOR_HUB=m > # CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set > # CONFIG_HID_ALPS is not set > # CONFIG_HID_MCP2221 is not set > # end of Special HID drivers > > # > # HID-BPF support > # > # end of HID-BPF support > > # > # USB HID support > # > CONFIG_USB_HID=m > CONFIG_HID_PID=y > CONFIG_USB_HIDDEV=y > > # > # USB HID Boot Protocol drivers > # > # CONFIG_USB_KBD is not set > # CONFIG_USB_MOUSE is not set > # end of USB HID Boot Protocol drivers > # end of USB HID support > > # CONFIG_I2C_HID is not set > CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y > CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_SUPPORT=y > CONFIG_USB_COMMON=m > # CONFIG_USB_LED_TRIG is not set > # CONFIG_USB_ULPI_BUS is not set > # CONFIG_USB_CONN_GPIO is not set > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB=m > CONFIG_USB_PCI=y > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > > # > # Miscellaneous USB options > # > CONFIG_USB_DEFAULT_PERSIST=y > # CONFIG_USB_FEW_INIT_RETRIES is not set > CONFIG_USB_DYNAMIC_MINORS=y > # CONFIG_USB_OTG is not set > # CONFIG_USB_OTG_PRODUCTLIST is not set > # CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set > # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set > CONFIG_USB_AUTOSUSPEND_DELAY=2 > CONFIG_USB_MON=m > > # > # USB Host Controller Drivers > # > # CONFIG_USB_C67X00_HCD is not set > CONFIG_USB_XHCI_HCD=m > # CONFIG_USB_XHCI_DBGCAP is not set > CONFIG_USB_XHCI_PCI=m > # CONFIG_USB_XHCI_PCI_RENESAS is not set > # CONFIG_USB_XHCI_PLATFORM is not set > CONFIG_USB_EHCI_HCD=m > CONFIG_USB_EHCI_ROOT_HUB_TT=y > CONFIG_USB_EHCI_TT_NEWSCHED=y > CONFIG_USB_EHCI_PCI=m > # CONFIG_XPS_USB_HCD_XILINX is not set > # CONFIG_USB_EHCI_FSL is not set > CONFIG_USB_EHCI_HCD_PPC_OF=y > # CONFIG_USB_EHCI_HCD_PLATFORM is not set > # CONFIG_USB_OXU210HP_HCD is not set > # CONFIG_USB_ISP116X_HCD is not set > # CONFIG_USB_MAX3421_HCD is not set > CONFIG_USB_OHCI_HCD=m > CONFIG_USB_OHCI_HCD_PPC_OF_BE=y > CONFIG_USB_OHCI_HCD_PPC_OF_LE=y > CONFIG_USB_OHCI_HCD_PPC_OF=y > CONFIG_USB_OHCI_HCD_PCI=m > # CONFIG_USB_OHCI_HCD_SSB is not set > # CONFIG_USB_OHCI_HCD_PLATFORM is not set > CONFIG_USB_UHCI_HCD=m > CONFIG_USB_SL811_HCD=m > # CONFIG_USB_SL811_HCD_ISO is not set > CONFIG_USB_SL811_CS=m > # CONFIG_USB_R8A66597_HCD is not set > # CONFIG_USB_HCD_BCMA is not set > # CONFIG_USB_HCD_SSB is not set > # CONFIG_USB_HCD_TEST_MODE is not set > > # > # USB Device Class drivers > # > CONFIG_USB_ACM=m > CONFIG_USB_PRINTER=m > CONFIG_USB_WDM=m > CONFIG_USB_TMC=m > > # > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may > # > > # > # also be needed; see USB_STORAGE Help for more info > # > CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > CONFIG_USB_STORAGE_REALTEK=m > CONFIG_REALTEK_AUTOPM=y > CONFIG_USB_STORAGE_DATAFAB=m > CONFIG_USB_STORAGE_FREECOM=m > CONFIG_USB_STORAGE_ISD200=m > CONFIG_USB_STORAGE_USBAT=m > CONFIG_USB_STORAGE_SDDR09=m > CONFIG_USB_STORAGE_SDDR55=m > CONFIG_USB_STORAGE_JUMPSHOT=m > CONFIG_USB_STORAGE_ALAUDA=m > CONFIG_USB_STORAGE_ONETOUCH=m > CONFIG_USB_STORAGE_KARMA=m > CONFIG_USB_STORAGE_CYPRESS_ATACB=m > CONFIG_USB_STORAGE_ENE_UB6250=m > # CONFIG_USB_UAS is not set > > # > # USB Imaging devices > # > CONFIG_USB_MDC800=m > CONFIG_USB_MICROTEK=m > # CONFIG_USBIP_CORE is not set > > # > # USB dual-mode controller drivers > # > # CONFIG_USB_CDNS_SUPPORT is not set > # CONFIG_USB_MUSB_HDRC is not set > # CONFIG_USB_DWC3 is not set > # CONFIG_USB_DWC2 is not set > # CONFIG_USB_CHIPIDEA is not set > # CONFIG_USB_ISP1760 is not set > > # > # USB port drivers > # > CONFIG_USB_SERIAL=m > CONFIG_USB_SERIAL_GENERIC=y > CONFIG_USB_SERIAL_SIMPLE=m > CONFIG_USB_SERIAL_AIRCABLE=m > CONFIG_USB_SERIAL_ARK3116=m > CONFIG_USB_SERIAL_BELKIN=m > CONFIG_USB_SERIAL_CH341=m > CONFIG_USB_SERIAL_WHITEHEAT=m > CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m > CONFIG_USB_SERIAL_CP210X=m > CONFIG_USB_SERIAL_CYPRESS_M8=m > CONFIG_USB_SERIAL_EMPEG=m > CONFIG_USB_SERIAL_FTDI_SIO=m > CONFIG_USB_SERIAL_VISOR=m > CONFIG_USB_SERIAL_IPAQ=m > CONFIG_USB_SERIAL_IR=m > CONFIG_USB_SERIAL_EDGEPORT=m > CONFIG_USB_SERIAL_EDGEPORT_TI=m > CONFIG_USB_SERIAL_F81232=m > # CONFIG_USB_SERIAL_F8153X is not set > CONFIG_USB_SERIAL_GARMIN=m > CONFIG_USB_SERIAL_IPW=m > CONFIG_USB_SERIAL_IUU=m > CONFIG_USB_SERIAL_KEYSPAN_PDA=m > CONFIG_USB_SERIAL_KEYSPAN=m > CONFIG_USB_SERIAL_KLSI=m > CONFIG_USB_SERIAL_KOBIL_SCT=m > CONFIG_USB_SERIAL_MCT_U232=m > CONFIG_USB_SERIAL_METRO=m > CONFIG_USB_SERIAL_MOS7720=m > CONFIG_USB_SERIAL_MOS7715_PARPORT=y > CONFIG_USB_SERIAL_MOS7840=m > CONFIG_USB_SERIAL_MXUPORT=m > CONFIG_USB_SERIAL_NAVMAN=m > CONFIG_USB_SERIAL_PL2303=m > CONFIG_USB_SERIAL_OTI6858=m > CONFIG_USB_SERIAL_QCAUX=m > CONFIG_USB_SERIAL_QUALCOMM=m > CONFIG_USB_SERIAL_SPCP8X5=m > CONFIG_USB_SERIAL_SAFE=m > # CONFIG_USB_SERIAL_SAFE_PADDED is not set > CONFIG_USB_SERIAL_SIERRAWIRELESS=m > CONFIG_USB_SERIAL_SYMBOL=m > CONFIG_USB_SERIAL_TI=m > CONFIG_USB_SERIAL_CYBERJACK=m > CONFIG_USB_SERIAL_WWAN=m > CONFIG_USB_SERIAL_OPTION=m > CONFIG_USB_SERIAL_OMNINET=m > CONFIG_USB_SERIAL_OPTICON=m > CONFIG_USB_SERIAL_XSENS_MT=m > CONFIG_USB_SERIAL_WISHBONE=m > CONFIG_USB_SERIAL_SSU100=m > CONFIG_USB_SERIAL_QT2=m > # CONFIG_USB_SERIAL_UPD78F0730 is not set > # CONFIG_USB_SERIAL_XR is not set > CONFIG_USB_SERIAL_DEBUG=m > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_USS720 is not set > CONFIG_USB_EMI62=m > CONFIG_USB_EMI26=m > CONFIG_USB_ADUTUX=m > CONFIG_USB_SEVSEG=m > CONFIG_USB_LEGOTOWER=m > CONFIG_USB_LCD=m > CONFIG_USB_CYPRESS_CY7C63=m > CONFIG_USB_CYTHERM=m > CONFIG_USB_IDMOUSE=m > CONFIG_USB_APPLEDISPLAY=m > # CONFIG_APPLE_MFI_FASTCHARGE is not set > CONFIG_USB_SISUSBVGA=m > CONFIG_USB_LD=m > CONFIG_USB_TRANCEVIBRATOR=m > CONFIG_USB_IOWARRIOR=m > CONFIG_USB_TEST=m > CONFIG_USB_EHSET_TEST_FIXTURE=m > CONFIG_USB_ISIGHTFW=m > CONFIG_USB_YUREX=m > CONFIG_USB_EZUSB_FX2=m > # CONFIG_USB_HUB_USB251XB is not set > # CONFIG_USB_HSIC_USB3503 is not set > # CONFIG_USB_HSIC_USB4604 is not set > # CONFIG_USB_LINK_LAYER_TEST is not set > CONFIG_USB_CHAOSKEY=m > # CONFIG_USB_ONBOARD_HUB is not set > CONFIG_USB_ATM=m > CONFIG_USB_SPEEDTOUCH=m > CONFIG_USB_CXACRU=m > CONFIG_USB_UEAGLEATM=m > CONFIG_USB_XUSBATM=m > > # > # USB Physical Layer drivers > # > # CONFIG_NOP_USB_XCEIV is not set > # CONFIG_USB_GPIO_VBUS is not set > # CONFIG_USB_ISP1301 is not set > # end of USB Physical Layer drivers > > # CONFIG_USB_GADGET is not set > # CONFIG_TYPEC is not set > # CONFIG_USB_ROLE_SWITCH is not set > CONFIG_MMC=m > CONFIG_PWRSEQ_EMMC=m > # CONFIG_PWRSEQ_SD8787 is not set > CONFIG_PWRSEQ_SIMPLE=m > CONFIG_MMC_BLOCK=m > CONFIG_MMC_BLOCK_MINORS=256 > CONFIG_SDIO_UART=m > # CONFIG_MMC_TEST is not set > > # > # MMC/SD/SDIO Host Controller Drivers > # > # CONFIG_MMC_DEBUG is not set > CONFIG_MMC_SDHCI=m > CONFIG_MMC_SDHCI_IO_ACCESSORS=y > CONFIG_MMC_SDHCI_PCI=m > CONFIG_MMC_RICOH_MMC=y > # CONFIG_MMC_SDHCI_PLTFM is not set > CONFIG_MMC_WBSD=m > CONFIG_MMC_TIFM_SD=m > # CONFIG_MMC_SPI is not set > CONFIG_MMC_SDRICOH_CS=m > CONFIG_MMC_CB710=m > CONFIG_MMC_VIA_SDMMC=m > CONFIG_MMC_VUB300=m > CONFIG_MMC_USHC=m > # CONFIG_MMC_USDHI6ROL0 is not set > CONFIG_MMC_CQHCI=m > # CONFIG_MMC_HSQ is not set > # CONFIG_MMC_TOSHIBA_PCI is not set > # CONFIG_MMC_MTK is not set > CONFIG_SCSI_UFSHCD=m > # CONFIG_SCSI_UFS_BSG is not set > # CONFIG_SCSI_UFS_HPB is not set > # CONFIG_SCSI_UFS_HWMON is not set > CONFIG_SCSI_UFSHCD_PCI=m > # CONFIG_SCSI_UFS_DWC_TC_PCI is not set > # CONFIG_SCSI_UFSHCD_PLATFORM is not set > CONFIG_MEMSTICK=m > # CONFIG_MEMSTICK_DEBUG is not set > > # > # MemoryStick drivers > # > # CONFIG_MEMSTICK_UNSAFE_RESUME is not set > CONFIG_MSPRO_BLOCK=m > # CONFIG_MS_BLOCK is not set > > # > # MemoryStick Host Controller Drivers > # > CONFIG_MEMSTICK_TIFM_MS=m > CONFIG_MEMSTICK_JMICRON_38X=m > CONFIG_MEMSTICK_R592=m > CONFIG_NEW_LEDS=y > CONFIG_LEDS_CLASS=y > # CONFIG_LEDS_CLASS_FLASH is not set > # CONFIG_LEDS_CLASS_MULTICOLOR is not set > # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set > > # > # LED drivers > # > # CONFIG_LEDS_AN30259A is not set > # CONFIG_LEDS_AW200XX is not set > # CONFIG_LEDS_AW2013 is not set > # CONFIG_LEDS_BCM6328 is not set > # CONFIG_LEDS_BCM6358 is not set > # CONFIG_LEDS_CR0014114 is not set > # CONFIG_LEDS_EL15203000 is not set > # CONFIG_LEDS_LM3530 is not set > # CONFIG_LEDS_LM3532 is not set > # CONFIG_LEDS_LM3642 is not set > # CONFIG_LEDS_LM3692X is not set > CONFIG_LEDS_PCA9532=m > # CONFIG_LEDS_PCA9532_GPIO is not set > # CONFIG_LEDS_GPIO is not set > CONFIG_LEDS_LP3944=m > # CONFIG_LEDS_LP3952 is not set > # CONFIG_LEDS_LP50XX is not set > # CONFIG_LEDS_LP55XX_COMMON is not set > # CONFIG_LEDS_LP8860 is not set > CONFIG_LEDS_PCA955X=m > # CONFIG_LEDS_PCA955X_GPIO is not set > # CONFIG_LEDS_PCA963X is not set > CONFIG_LEDS_DAC124S085=m > # CONFIG_LEDS_BD2606MVV is not set > CONFIG_LEDS_BD2802=m > # CONFIG_LEDS_LT3593 is not set > # CONFIG_LEDS_TCA6507 is not set > # CONFIG_LEDS_TLC591XX is not set > # CONFIG_LEDS_LM355x is not set > # CONFIG_LEDS_IS31FL319X is not set > # CONFIG_LEDS_IS31FL32XX is not set > > # > # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) > # > # CONFIG_LEDS_BLINKM is not set > # CONFIG_LEDS_MLXREG is not set > # CONFIG_LEDS_USER is not set > # CONFIG_LEDS_SPI_BYTE is not set > # CONFIG_LEDS_LM3697 is not set > > # > # Flash and Torch LED drivers > # > > # > # RGB LED drivers > # > > # > # LED Triggers > # > CONFIG_LEDS_TRIGGERS=y > CONFIG_LEDS_TRIGGER_TIMER=m > CONFIG_LEDS_TRIGGER_ONESHOT=m > # CONFIG_LEDS_TRIGGER_DISK is not set > CONFIG_LEDS_TRIGGER_HEARTBEAT=m > CONFIG_LEDS_TRIGGER_BACKLIGHT=m > CONFIG_LEDS_TRIGGER_CPU=y > # CONFIG_LEDS_TRIGGER_ACTIVITY is not set > CONFIG_LEDS_TRIGGER_DEFAULT_ON=m > > # > # iptables trigger is under Netfilter config (LED target) > # > CONFIG_LEDS_TRIGGER_TRANSIENT=m > CONFIG_LEDS_TRIGGER_CAMERA=m > # CONFIG_LEDS_TRIGGER_PANIC is not set > # CONFIG_LEDS_TRIGGER_NETDEV is not set > # CONFIG_LEDS_TRIGGER_PATTERN is not set > CONFIG_LEDS_TRIGGER_AUDIO=m > # CONFIG_LEDS_TRIGGER_TTY is not set > > # > # Simple LED drivers > # > CONFIG_ACCESSIBILITY=y > CONFIG_A11Y_BRAILLE_CONSOLE=y > > # > # Speakup console speech > # > CONFIG_SPEAKUP=m > CONFIG_SPEAKUP_SYNTH_ACNTSA=m > CONFIG_SPEAKUP_SYNTH_APOLLO=m > CONFIG_SPEAKUP_SYNTH_AUDPTR=m > CONFIG_SPEAKUP_SYNTH_BNS=m > CONFIG_SPEAKUP_SYNTH_DECTLK=m > CONFIG_SPEAKUP_SYNTH_DECEXT=m > CONFIG_SPEAKUP_SYNTH_LTLK=m > CONFIG_SPEAKUP_SYNTH_SOFT=m > CONFIG_SPEAKUP_SYNTH_SPKOUT=m > CONFIG_SPEAKUP_SYNTH_TXPRT=m > CONFIG_SPEAKUP_SYNTH_DUMMY=m > # end of Speakup console speech > > CONFIG_INFINIBAND=m > CONFIG_INFINIBAND_USER_MAD=m > CONFIG_INFINIBAND_USER_ACCESS=m > CONFIG_INFINIBAND_USER_MEM=y > CONFIG_INFINIBAND_ON_DEMAND_PAGING=y > CONFIG_INFINIBAND_ADDR_TRANS=y > CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y > CONFIG_INFINIBAND_CXGB4=m > CONFIG_MLX4_INFINIBAND=m > CONFIG_MLX5_INFINIBAND=m > CONFIG_INFINIBAND_MTHCA=m > CONFIG_INFINIBAND_MTHCA_DEBUG=y > CONFIG_INFINIBAND_OCRDMA=m > # CONFIG_INFINIBAND_VMWARE_PVRDMA is not set > CONFIG_INFINIBAND_IPOIB=m > CONFIG_INFINIBAND_IPOIB_CM=y > CONFIG_INFINIBAND_IPOIB_DEBUG=y > # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set > CONFIG_INFINIBAND_SRP=m > CONFIG_INFINIBAND_SRPT=m > CONFIG_INFINIBAND_ISER=m > CONFIG_INFINIBAND_ISERT=m > # CONFIG_INFINIBAND_RTRS_CLIENT is not set > # CONFIG_INFINIBAND_RTRS_SERVER is not set > CONFIG_EDAC_ATOMIC_SCRUB=y > CONFIG_EDAC_SUPPORT=y > # CONFIG_EDAC is not set > CONFIG_RTC_LIB=y > CONFIG_RTC_MC146818_LIB=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_HCTOSYS=y > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > CONFIG_RTC_SYSTOHC=y > CONFIG_RTC_SYSTOHC_DEVICE="rtc0" > # CONFIG_RTC_DEBUG is not set > CONFIG_RTC_NVMEM=y > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=y > CONFIG_RTC_INTF_PROC=y > CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > # CONFIG_RTC_DRV_TEST is not set > > # > # I2C RTC drivers > # > # CONFIG_RTC_DRV_ABB5ZES3 is not set > # CONFIG_RTC_DRV_ABEOZ9 is not set > # CONFIG_RTC_DRV_ABX80X is not set > # CONFIG_RTC_DRV_DS1307 is not set > # CONFIG_RTC_DRV_DS1374 is not set > # CONFIG_RTC_DRV_DS1672 is not set > # CONFIG_RTC_DRV_HYM8563 is not set > # CONFIG_RTC_DRV_MAX6900 is not set > # CONFIG_RTC_DRV_NCT3018Y is not set > # CONFIG_RTC_DRV_RS5C372 is not set > # CONFIG_RTC_DRV_ISL1208 is not set > # CONFIG_RTC_DRV_ISL12022 is not set > # CONFIG_RTC_DRV_ISL12026 is not set > # CONFIG_RTC_DRV_X1205 is not set > # CONFIG_RTC_DRV_PCF8523 is not set > # CONFIG_RTC_DRV_PCF85063 is not set > # CONFIG_RTC_DRV_PCF85363 is not set > # CONFIG_RTC_DRV_PCF8563 is not set > # CONFIG_RTC_DRV_PCF8583 is not set > # CONFIG_RTC_DRV_M41T80 is not set > # CONFIG_RTC_DRV_BQ32K is not set > # CONFIG_RTC_DRV_S35390A is not set > # CONFIG_RTC_DRV_FM3130 is not set > # CONFIG_RTC_DRV_RX8010 is not set > # CONFIG_RTC_DRV_RX8581 is not set > # CONFIG_RTC_DRV_RX8025 is not set > # CONFIG_RTC_DRV_EM3027 is not set > # CONFIG_RTC_DRV_RV3028 is not set > # CONFIG_RTC_DRV_RV3032 is not set > # CONFIG_RTC_DRV_RV8803 is not set > # CONFIG_RTC_DRV_SD3078 is not set > > # > # SPI RTC drivers > # > # CONFIG_RTC_DRV_M41T93 is not set > # CONFIG_RTC_DRV_M41T94 is not set > # CONFIG_RTC_DRV_DS1302 is not set > # CONFIG_RTC_DRV_DS1305 is not set > # CONFIG_RTC_DRV_DS1343 is not set > # CONFIG_RTC_DRV_DS1347 is not set > # CONFIG_RTC_DRV_DS1390 is not set > # CONFIG_RTC_DRV_MAX6916 is not set > # CONFIG_RTC_DRV_R9701 is not set > # CONFIG_RTC_DRV_RX4581 is not set > # CONFIG_RTC_DRV_RS5C348 is not set > # CONFIG_RTC_DRV_MAX6902 is not set > # CONFIG_RTC_DRV_PCF2123 is not set > # CONFIG_RTC_DRV_MCP795 is not set > CONFIG_RTC_I2C_AND_SPI=y > > # > # SPI and I2C RTC drivers > # > # CONFIG_RTC_DRV_DS3232 is not set > # CONFIG_RTC_DRV_PCF2127 is not set > # CONFIG_RTC_DRV_RV3029C2 is not set > # CONFIG_RTC_DRV_RX6110 is not set > > # > # Platform RTC drivers > # > CONFIG_RTC_DRV_CMOS=m > # CONFIG_RTC_DRV_DS1286 is not set > # CONFIG_RTC_DRV_DS1511 is not set > # CONFIG_RTC_DRV_DS1553 is not set > # CONFIG_RTC_DRV_DS1685_FAMILY is not set > # CONFIG_RTC_DRV_DS1742 is not set > # CONFIG_RTC_DRV_DS2404 is not set > # CONFIG_RTC_DRV_STK17TA8 is not set > # CONFIG_RTC_DRV_M48T86 is not set > # CONFIG_RTC_DRV_M48T35 is not set > # CONFIG_RTC_DRV_M48T59 is not set > # CONFIG_RTC_DRV_MSM6242 is not set > # CONFIG_RTC_DRV_BQ4802 is not set > # CONFIG_RTC_DRV_RP5C01 is not set > # CONFIG_RTC_DRV_ZYNQMP is not set > > # > # on-CPU RTC drivers > # > CONFIG_RTC_DRV_GENERIC=y > # CONFIG_RTC_DRV_CADENCE is not set > # CONFIG_RTC_DRV_FTRTC010 is not set > # CONFIG_RTC_DRV_MPC5121 is not set > # CONFIG_RTC_DRV_R7301 is not set > > # > # HID Sensor RTC drivers > # > # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set > # CONFIG_RTC_DRV_GOLDFISH is not set > CONFIG_DMADEVICES=y > # CONFIG_DMADEVICES_DEBUG is not set > > # > # DMA Devices > # > CONFIG_DMA_ENGINE=y > CONFIG_DMA_OF=y > # CONFIG_ALTERA_MSGDMA is not set > # CONFIG_DW_AXI_DMAC is not set > # CONFIG_FSL_EDMA is not set > # CONFIG_INTEL_IDMA64 is not set > # CONFIG_PLX_DMA is not set > # CONFIG_XILINX_XDMA is not set > # CONFIG_XILINX_ZYNQMP_DPDMA is not set > CONFIG_PPC_BESTCOMM=m > CONFIG_PPC_BESTCOMM_ATA=m > CONFIG_PPC_BESTCOMM_FEC=m > # CONFIG_QCOM_HIDMA_MGMT is not set > # CONFIG_QCOM_HIDMA is not set > # CONFIG_DW_DMAC is not set > # CONFIG_DW_DMAC_PCI is not set > # CONFIG_DW_EDMA is not set > # CONFIG_SF_PDMA is not set > > # > # DMA Clients > # > # CONFIG_ASYNC_TX_DMA is not set > # CONFIG_DMATEST is not set > > # > # DMABUF options > # > CONFIG_SYNC_FILE=y > # CONFIG_SW_SYNC is not set > # CONFIG_UDMABUF is not set > # CONFIG_DMABUF_MOVE_NOTIFY is not set > # CONFIG_DMABUF_DEBUG is not set > # CONFIG_DMABUF_SELFTESTS is not set > # CONFIG_DMABUF_HEAPS is not set > # CONFIG_DMABUF_SYSFS_STATS is not set > # end of DMABUF options > > # CONFIG_AUXDISPLAY is not set > # CONFIG_PANEL is not set > CONFIG_UIO=m > CONFIG_UIO_CIF=m > # CONFIG_UIO_PDRV_GENIRQ is not set > # CONFIG_UIO_DMEM_GENIRQ is not set > CONFIG_UIO_AEC=m > CONFIG_UIO_SERCOS3=m > CONFIG_UIO_PCI_GENERIC=m > CONFIG_UIO_NETX=m > # CONFIG_UIO_PRUSS is not set > CONFIG_UIO_MF624=m > # CONFIG_VFIO is not set > CONFIG_VIRT_DRIVERS=y > CONFIG_VIRTIO_ANCHOR=y > CONFIG_VIRTIO=m > CONFIG_VIRTIO_PCI_LIB=m > CONFIG_VIRTIO_PCI_LIB_LEGACY=m > CONFIG_VIRTIO_MENU=y > CONFIG_VIRTIO_PCI=m > CONFIG_VIRTIO_PCI_LEGACY=y > CONFIG_VIRTIO_BALLOON=m > # CONFIG_VIRTIO_INPUT is not set > # CONFIG_VIRTIO_MMIO is not set > # CONFIG_VDPA is not set > CONFIG_VHOST_IOTLB=m > CONFIG_VHOST_TASK=y > CONFIG_VHOST=m > CONFIG_VHOST_MENU=y > CONFIG_VHOST_NET=m > CONFIG_VHOST_SCSI=m > # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set > > # > # Microsoft Hyper-V guest support > # > # end of Microsoft Hyper-V guest support > > # CONFIG_GREYBUS is not set > # CONFIG_COMEDI is not set > CONFIG_STAGING=y > # CONFIG_PRISM2_USB is not set > # CONFIG_RTL8192U is not set > # CONFIG_RTLLIB is not set > # CONFIG_RTL8723BS is not set > CONFIG_R8712U=m > # CONFIG_RTS5208 is not set > # CONFIG_VT6655 is not set > # CONFIG_VT6656 is not set > > # > # IIO staging drivers > # > > # > # Accelerometers > # > # CONFIG_ADIS16203 is not set > # CONFIG_ADIS16240 is not set > # end of Accelerometers > > # > # Analog to digital converters > # > # CONFIG_AD7816 is not set > # end of Analog to digital converters > > # > # Analog digital bi-direction converters > # > # CONFIG_ADT7316 is not set > # end of Analog digital bi-direction converters > > # > # Direct Digital Synthesis > # > # CONFIG_AD9832 is not set > # CONFIG_AD9834 is not set > # end of Direct Digital Synthesis > > # > # Network Analyzer, Impedance Converters > # > # CONFIG_AD5933 is not set > # end of Network Analyzer, Impedance Converters > > # > # Resolver to digital converters > # > # CONFIG_AD2S1210 is not set > # end of Resolver to digital converters > # end of IIO staging drivers > > # CONFIG_FB_SM750 is not set > # CONFIG_STAGING_MEDIA is not set > # CONFIG_STAGING_BOARD is not set > # CONFIG_LTE_GDM724X is not set > # CONFIG_FB_TFT is not set > # CONFIG_KS7010 is not set > # CONFIG_PI433 is not set > # CONFIG_XIL_AXIS_FIFO is not set > # CONFIG_FIELDBUS_DEV is not set > CONFIG_QLGE=m > # CONFIG_VME_BUS is not set > # CONFIG_GOLDFISH is not set > CONFIG_HAVE_CLK=y > CONFIG_HAVE_CLK_PREPARE=y > CONFIG_COMMON_CLK=y > # CONFIG_LMK04832 is not set > # CONFIG_COMMON_CLK_MAX9485 is not set > # CONFIG_COMMON_CLK_SI5341 is not set > # CONFIG_COMMON_CLK_SI5351 is not set > # CONFIG_COMMON_CLK_SI514 is not set > # CONFIG_COMMON_CLK_SI544 is not set > # CONFIG_COMMON_CLK_SI570 is not set > # CONFIG_COMMON_CLK_CDCE706 is not set > # CONFIG_COMMON_CLK_CDCE925 is not set > # CONFIG_COMMON_CLK_CS2000_CP is not set > # CONFIG_COMMON_CLK_AXI_CLKGEN is not set > # CONFIG_COMMON_CLK_RS9_PCIE is not set > # CONFIG_COMMON_CLK_SI521XX is not set > # CONFIG_COMMON_CLK_VC5 is not set > # CONFIG_COMMON_CLK_VC7 is not set > # CONFIG_COMMON_CLK_FIXED_MMIO is not set > # CONFIG_XILINX_VCU is not set > # CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set > # CONFIG_HWSPINLOCK is not set > > # > # Clock Source drivers > # > CONFIG_I8253_LOCK=y > CONFIG_CLKBLD_I8253=y > # end of Clock Source drivers > > # CONFIG_MAILBOX is not set > CONFIG_IOMMU_API=y > CONFIG_IOMMU_SUPPORT=y > > # > # Generic IOMMU Pagetable Support > # > # end of Generic IOMMU Pagetable Support > > # CONFIG_IOMMU_DEBUGFS is not set > CONFIG_IOMMU_DEFAULT_DMA_STRICT=y > # CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set > # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set > CONFIG_OF_IOMMU=y > # CONFIG_IOMMUFD is not set > > # > # Remoteproc drivers > # > # CONFIG_REMOTEPROC is not set > # end of Remoteproc drivers > > # > # Rpmsg drivers > # > # CONFIG_RPMSG_VIRTIO is not set > # end of Rpmsg drivers > > # CONFIG_SOUNDWIRE is not set > > # > # SOC (System On Chip) specific Drivers > # > > # > # Amlogic SoC drivers > # > # end of Amlogic SoC drivers > > # > # Broadcom SoC drivers > # > # end of Broadcom SoC drivers > > # > # NXP/Freescale QorIQ SoC drivers > # > # CONFIG_QUICC_ENGINE is not set > # end of NXP/Freescale QorIQ SoC drivers > > # > # fujitsu SoC drivers > # > # end of fujitsu SoC drivers > > # > # i.MX SoC drivers > # > # end of i.MX SoC drivers > > # > # Enable LiteX SoC Builder specific drivers > # > # CONFIG_LITEX_SOC_CONTROLLER is not set > # end of Enable LiteX SoC Builder specific drivers > > # CONFIG_WPCM450_SOC is not set > > # > # Qualcomm SoC drivers > # > # end of Qualcomm SoC drivers > > # CONFIG_SOC_TI is not set > > # > # Xilinx SoC drivers > # > # end of Xilinx SoC drivers > # end of SOC (System On Chip) specific Drivers > > CONFIG_PM_DEVFREQ=y > > # > # DEVFREQ Governors > # > CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m > # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set > # CONFIG_DEVFREQ_GOV_POWERSAVE is not set > # CONFIG_DEVFREQ_GOV_USERSPACE is not set > # CONFIG_DEVFREQ_GOV_PASSIVE is not set > > # > # DEVFREQ Drivers > # > # CONFIG_PM_DEVFREQ_EVENT is not set > # CONFIG_EXTCON is not set > CONFIG_MEMORY=y > CONFIG_IIO=m > CONFIG_IIO_BUFFER=y > # CONFIG_IIO_BUFFER_CB is not set > # CONFIG_IIO_BUFFER_DMA is not set > # CONFIG_IIO_BUFFER_DMAENGINE is not set > # CONFIG_IIO_BUFFER_HW_CONSUMER is not set > CONFIG_IIO_KFIFO_BUF=m > CONFIG_IIO_TRIGGERED_BUFFER=m > # CONFIG_IIO_CONFIGFS is not set > CONFIG_IIO_TRIGGER=y > CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 > # CONFIG_IIO_SW_DEVICE is not set > # CONFIG_IIO_SW_TRIGGER is not set > # CONFIG_IIO_TRIGGERED_EVENT is not set > > # > # Accelerometers > # > # CONFIG_ADIS16201 is not set > # CONFIG_ADIS16209 is not set > # CONFIG_ADXL313_I2C is not set > # CONFIG_ADXL313_SPI is not set > # CONFIG_ADXL345_I2C is not set > # CONFIG_ADXL345_SPI is not set > # CONFIG_ADXL355_I2C is not set > # CONFIG_ADXL355_SPI is not set > # CONFIG_ADXL367_SPI is not set > # CONFIG_ADXL367_I2C is not set > # CONFIG_ADXL372_SPI is not set > # CONFIG_ADXL372_I2C is not set > # CONFIG_BMA180 is not set > # CONFIG_BMA220 is not set > # CONFIG_BMA400 is not set > # CONFIG_BMC150_ACCEL is not set > # CONFIG_BMI088_ACCEL is not set > # CONFIG_DA280 is not set > # CONFIG_DA311 is not set > # CONFIG_DMARD06 is not set > # CONFIG_DMARD09 is not set > # CONFIG_DMARD10 is not set > # CONFIG_FXLS8962AF_I2C is not set > # CONFIG_FXLS8962AF_SPI is not set > CONFIG_HID_SENSOR_ACCEL_3D=m > # CONFIG_IIO_ST_ACCEL_3AXIS is not set > # CONFIG_IIO_KX022A_SPI is not set > # CONFIG_IIO_KX022A_I2C is not set > # CONFIG_KXSD9 is not set > # CONFIG_KXCJK1013 is not set > # CONFIG_MC3230 is not set > # CONFIG_MMA7455_I2C is not set > # CONFIG_MMA7455_SPI is not set > # CONFIG_MMA7660 is not set > # CONFIG_MMA8452 is not set > # CONFIG_MMA9551 is not set > # CONFIG_MMA9553 is not set > # CONFIG_MSA311 is not set > # CONFIG_MXC4005 is not set > # CONFIG_MXC6255 is not set > # CONFIG_SCA3000 is not set > # CONFIG_SCA3300 is not set > # CONFIG_STK8312 is not set > # CONFIG_STK8BA50 is not set > # end of Accelerometers > > # > # Analog to digital converters > # > # CONFIG_AD4130 is not set > # CONFIG_AD7091R5 is not set > # CONFIG_AD7124 is not set > # CONFIG_AD7192 is not set > # CONFIG_AD7266 is not set > # CONFIG_AD7280 is not set > # CONFIG_AD7291 is not set > # CONFIG_AD7292 is not set > # CONFIG_AD7298 is not set > # CONFIG_AD7476 is not set > # CONFIG_AD7606_IFACE_PARALLEL is not set > # CONFIG_AD7606_IFACE_SPI is not set > # CONFIG_AD7766 is not set > # CONFIG_AD7768_1 is not set > # CONFIG_AD7780 is not set > # CONFIG_AD7791 is not set > # CONFIG_AD7793 is not set > # CONFIG_AD7887 is not set > # CONFIG_AD7923 is not set > # CONFIG_AD7949 is not set > # CONFIG_AD799X is not set > # CONFIG_ADI_AXI_ADC is not set > # CONFIG_ENVELOPE_DETECTOR is not set > # CONFIG_HI8435 is not set > # CONFIG_HX711 is not set > # CONFIG_INA2XX_ADC is not set > # CONFIG_LTC2471 is not set > # CONFIG_LTC2485 is not set > # CONFIG_LTC2496 is not set > # CONFIG_LTC2497 is not set > # CONFIG_MAX1027 is not set > # CONFIG_MAX11100 is not set > # CONFIG_MAX1118 is not set > # CONFIG_MAX11205 is not set > # CONFIG_MAX11410 is not set > # CONFIG_MAX1241 is not set > # CONFIG_MAX1363 is not set > # CONFIG_MAX9611 is not set > # CONFIG_MCP320X is not set > # CONFIG_MCP3422 is not set > # CONFIG_MCP3911 is not set > # CONFIG_NAU7802 is not set > # CONFIG_RICHTEK_RTQ6056 is not set > # CONFIG_SD_ADC_MODULATOR is not set > # CONFIG_TI_ADC081C is not set > # CONFIG_TI_ADC0832 is not set > # CONFIG_TI_ADC084S021 is not set > # CONFIG_TI_ADC12138 is not set > # CONFIG_TI_ADC108S102 is not set > # CONFIG_TI_ADC128S052 is not set > # CONFIG_TI_ADC161S626 is not set > # CONFIG_TI_ADS1015 is not set > # CONFIG_TI_ADS7924 is not set > # CONFIG_TI_ADS1100 is not set > # CONFIG_TI_ADS7950 is not set > # CONFIG_TI_ADS8344 is not set > # CONFIG_TI_ADS8688 is not set > # CONFIG_TI_ADS124S08 is not set > # CONFIG_TI_ADS131E08 is not set > # CONFIG_TI_LMP92064 is not set > # CONFIG_TI_TLC4541 is not set > # CONFIG_TI_TSC2046 is not set > # CONFIG_VF610_ADC is not set > CONFIG_VIPERBOARD_ADC=m > # CONFIG_XILINX_XADC is not set > # end of Analog to digital converters > > # > # Analog to digital and digital to analog converters > # > # CONFIG_AD74115 is not set > # CONFIG_AD74413R is not set > # end of Analog to digital and digital to analog converters > > # > # Analog Front Ends > # > # CONFIG_IIO_RESCALE is not set > # end of Analog Front Ends > > # > # Amplifiers > # > # CONFIG_AD8366 is not set > # CONFIG_ADA4250 is not set > # CONFIG_HMC425 is not set > # end of Amplifiers > > # > # Capacitance to digital converters > # > # CONFIG_AD7150 is not set > # CONFIG_AD7746 is not set > # end of Capacitance to digital converters > > # > # Chemical Sensors > # > # CONFIG_ATLAS_PH_SENSOR is not set > # CONFIG_ATLAS_EZO_SENSOR is not set > # CONFIG_BME680 is not set > # CONFIG_CCS811 is not set > # CONFIG_IAQCORE is not set > # CONFIG_SCD30_CORE is not set > # CONFIG_SCD4X is not set > # CONFIG_SENSIRION_SGP30 is not set > # CONFIG_SENSIRION_SGP40 is not set > # CONFIG_SPS30_I2C is not set > # CONFIG_SENSEAIR_SUNRISE_CO2 is not set > # CONFIG_VZ89X is not set > # end of Chemical Sensors > > # > # Hid Sensor IIO Common > # > CONFIG_HID_SENSOR_IIO_COMMON=m > CONFIG_HID_SENSOR_IIO_TRIGGER=m > # end of Hid Sensor IIO Common > > # > # IIO SCMI Sensors > # > # end of IIO SCMI Sensors > > # > # SSP Sensor Common > # > # CONFIG_IIO_SSP_SENSORHUB is not set > # end of SSP Sensor Common > > # > # Digital to analog converters > # > # CONFIG_AD3552R is not set > # CONFIG_AD5064 is not set > # CONFIG_AD5360 is not set > # CONFIG_AD5380 is not set > # CONFIG_AD5421 is not set > # CONFIG_AD5446 is not set > # CONFIG_AD5449 is not set > # CONFIG_AD5592R is not set > # CONFIG_AD5593R is not set > # CONFIG_AD5504 is not set > # CONFIG_AD5624R_SPI is not set > # CONFIG_LTC2688 is not set > # CONFIG_AD5686_SPI is not set > # CONFIG_AD5696_I2C is not set > # CONFIG_AD5755 is not set > # CONFIG_AD5758 is not set > # CONFIG_AD5761 is not set > # CONFIG_AD5764 is not set > # CONFIG_AD5766 is not set > # CONFIG_AD5770R is not set > # CONFIG_AD5791 is not set > # CONFIG_AD7293 is not set > # CONFIG_AD7303 is not set > # CONFIG_AD8801 is not set > # CONFIG_DPOT_DAC is not set > # CONFIG_DS4424 is not set > # CONFIG_LTC1660 is not set > # CONFIG_LTC2632 is not set > # CONFIG_M62332 is not set > # CONFIG_MAX517 is not set > # CONFIG_MAX5522 is not set > # CONFIG_MAX5821 is not set > # CONFIG_MCP4725 is not set > # CONFIG_MCP4922 is not set > # CONFIG_TI_DAC082S085 is not set > # CONFIG_TI_DAC5571 is not set > # CONFIG_TI_DAC7311 is not set > # CONFIG_TI_DAC7612 is not set > # CONFIG_VF610_DAC is not set > # end of Digital to analog converters > > # > # IIO dummy driver > # > # end of IIO dummy driver > > # > # Filters > # > # end of Filters > > # > # Frequency Synthesizers DDS/PLL > # > > # > # Clock Generator/Distribution > # > # CONFIG_AD9523 is not set > # end of Clock Generator/Distribution > > # > # Phase-Locked Loop (PLL) frequency synthesizers > # > # CONFIG_ADF4350 is not set > # CONFIG_ADF4371 is not set > # CONFIG_ADF4377 is not set > # CONFIG_ADMV1013 is not set > # CONFIG_ADMV4420 is not set > # CONFIG_ADRF6780 is not set > # end of Phase-Locked Loop (PLL) frequency synthesizers > # end of Frequency Synthesizers DDS/PLL > > # > # Digital gyroscope sensors > # > # CONFIG_ADIS16080 is not set > # CONFIG_ADIS16130 is not set > # CONFIG_ADIS16136 is not set > # CONFIG_ADIS16260 is not set > # CONFIG_ADXRS290 is not set > # CONFIG_ADXRS450 is not set > # CONFIG_BMG160 is not set > # CONFIG_FXAS21002C is not set > CONFIG_HID_SENSOR_GYRO_3D=m > # CONFIG_MPU3050_I2C is not set > # CONFIG_IIO_ST_GYRO_3AXIS is not set > # CONFIG_ITG3200 is not set > # end of Digital gyroscope sensors > > # > # Health Sensors > # > > # > # Heart Rate Monitors > # > # CONFIG_AFE4403 is not set > # CONFIG_AFE4404 is not set > # CONFIG_MAX30100 is not set > # CONFIG_MAX30102 is not set > # end of Heart Rate Monitors > # end of Health Sensors > > # > # Humidity sensors > # > # CONFIG_AM2315 is not set > # CONFIG_DHT11 is not set > # CONFIG_HDC100X is not set > # CONFIG_HDC2010 is not set > # CONFIG_HID_SENSOR_HUMIDITY is not set > # CONFIG_HTS221 is not set > # CONFIG_HTU21 is not set > # CONFIG_SI7005 is not set > # CONFIG_SI7020 is not set > # end of Humidity sensors > > # > # Inertial measurement units > # > # CONFIG_ADIS16400 is not set > # CONFIG_ADIS16460 is not set > # CONFIG_ADIS16475 is not set > # CONFIG_ADIS16480 is not set > # CONFIG_BMI160_I2C is not set > # CONFIG_BMI160_SPI is not set > # CONFIG_BOSCH_BNO055_I2C is not set > # CONFIG_FXOS8700_I2C is not set > # CONFIG_FXOS8700_SPI is not set > # CONFIG_KMX61 is not set > # CONFIG_INV_ICM42600_I2C is not set > # CONFIG_INV_ICM42600_SPI is not set > # CONFIG_INV_MPU6050_I2C is not set > # CONFIG_INV_MPU6050_SPI is not set > # CONFIG_IIO_ST_LSM6DSX is not set > # CONFIG_IIO_ST_LSM9DS0 is not set > # end of Inertial measurement units > > # > # Light sensors > # > # CONFIG_ADJD_S311 is not set > # CONFIG_ADUX1020 is not set > # CONFIG_AL3010 is not set > # CONFIG_AL3320A is not set > # CONFIG_APDS9300 is not set > # CONFIG_APDS9960 is not set > # CONFIG_AS73211 is not set > # CONFIG_BH1750 is not set > # CONFIG_BH1780 is not set > # CONFIG_CM32181 is not set > # CONFIG_CM3232 is not set > # CONFIG_CM3323 is not set > # CONFIG_CM3605 is not set > # CONFIG_CM36651 is not set > # CONFIG_GP2AP002 is not set > # CONFIG_GP2AP020A00F is not set > # CONFIG_SENSORS_ISL29018 is not set > # CONFIG_SENSORS_ISL29028 is not set > # CONFIG_ISL29125 is not set > CONFIG_HID_SENSOR_ALS=m > CONFIG_HID_SENSOR_PROX=m > # CONFIG_JSA1212 is not set > # CONFIG_ROHM_BU27008 is not set > # CONFIG_ROHM_BU27034 is not set > # CONFIG_RPR0521 is not set > # CONFIG_LTR501 is not set > # CONFIG_LTRF216A is not set > # CONFIG_LV0104CS is not set > # CONFIG_MAX44000 is not set > # CONFIG_MAX44009 is not set > # CONFIG_NOA1305 is not set > # CONFIG_OPT3001 is not set > # CONFIG_OPT4001 is not set > # CONFIG_PA12203001 is not set > # CONFIG_SI1133 is not set > # CONFIG_SI1145 is not set > # CONFIG_STK3310 is not set > # CONFIG_ST_UVIS25 is not set > # CONFIG_TCS3414 is not set > # CONFIG_TCS3472 is not set > # CONFIG_SENSORS_TSL2563 is not set > # CONFIG_TSL2583 is not set > # CONFIG_TSL2591 is not set > # CONFIG_TSL2772 is not set > # CONFIG_TSL4531 is not set > # CONFIG_US5182D is not set > # CONFIG_VCNL4000 is not set > # CONFIG_VCNL4035 is not set > # CONFIG_VEML6030 is not set > # CONFIG_VEML6070 is not set > # CONFIG_VL6180 is not set > # CONFIG_ZOPT2201 is not set > # end of Light sensors > > # > # Magnetometer sensors > # > # CONFIG_AK8974 is not set > # CONFIG_AK8975 is not set > # CONFIG_AK09911 is not set > # CONFIG_BMC150_MAGN_I2C is not set > # CONFIG_BMC150_MAGN_SPI is not set > # CONFIG_MAG3110 is not set > CONFIG_HID_SENSOR_MAGNETOMETER_3D=m > # CONFIG_MMC35240 is not set > # CONFIG_IIO_ST_MAGN_3AXIS is not set > # CONFIG_SENSORS_HMC5843_I2C is not set > # CONFIG_SENSORS_HMC5843_SPI is not set > # CONFIG_SENSORS_RM3100_I2C is not set > # CONFIG_SENSORS_RM3100_SPI is not set > # CONFIG_TI_TMAG5273 is not set > # CONFIG_YAMAHA_YAS530 is not set > # end of Magnetometer sensors > > # > # Multiplexers > # > # CONFIG_IIO_MUX is not set > # end of Multiplexers > > # > # Inclinometer sensors > # > CONFIG_HID_SENSOR_INCLINOMETER_3D=m > CONFIG_HID_SENSOR_DEVICE_ROTATION=m > # end of Inclinometer sensors > > # > # Triggers - standalone > # > # CONFIG_IIO_INTERRUPT_TRIGGER is not set > # CONFIG_IIO_SYSFS_TRIGGER is not set > # end of Triggers - standalone > > # > # Linear and angular position sensors > # > # CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE is not set > # end of Linear and angular position sensors > > # > # Digital potentiometers > # > # CONFIG_AD5110 is not set > # CONFIG_AD5272 is not set > # CONFIG_DS1803 is not set > # CONFIG_MAX5432 is not set > # CONFIG_MAX5481 is not set > # CONFIG_MAX5487 is not set > # CONFIG_MCP4018 is not set > # CONFIG_MCP4131 is not set > # CONFIG_MCP4531 is not set > # CONFIG_MCP41010 is not set > # CONFIG_TPL0102 is not set > # CONFIG_X9250 is not set > # end of Digital potentiometers > > # > # Digital potentiostats > # > # CONFIG_LMP91000 is not set > # end of Digital potentiostats > > # > # Pressure sensors > # > # CONFIG_ABP060MG is not set > # CONFIG_BMP280 is not set > # CONFIG_DLHL60D is not set > # CONFIG_DPS310 is not set > CONFIG_HID_SENSOR_PRESS=m > # CONFIG_HP03 is not set > # CONFIG_ICP10100 is not set > # CONFIG_MPL115_I2C is not set > # CONFIG_MPL115_SPI is not set > # CONFIG_MPL3115 is not set > # CONFIG_MPRLS0025PA is not set > # CONFIG_MS5611 is not set > # CONFIG_MS5637 is not set > # CONFIG_IIO_ST_PRESS is not set > # CONFIG_T5403 is not set > # CONFIG_HP206C is not set > # CONFIG_ZPA2326 is not set > # end of Pressure sensors > > # > # Lightning sensors > # > # CONFIG_AS3935 is not set > # end of Lightning sensors > > # > # Proximity and distance sensors > # > # CONFIG_ISL29501 is not set > # CONFIG_LIDAR_LITE_V2 is not set > # CONFIG_MB1232 is not set > # CONFIG_PING is not set > # CONFIG_RFD77402 is not set > # CONFIG_SRF04 is not set > # CONFIG_SX9310 is not set > # CONFIG_SX9324 is not set > # CONFIG_SX9360 is not set > # CONFIG_SX9500 is not set > # CONFIG_SRF08 is not set > # CONFIG_VCNL3020 is not set > # CONFIG_VL53L0X_I2C is not set > # end of Proximity and distance sensors > > # > # Resolver to digital converters > # > # CONFIG_AD2S90 is not set > # CONFIG_AD2S1200 is not set > # end of Resolver to digital converters > > # > # Temperature sensors > # > # CONFIG_LTC2983 is not set > # CONFIG_MAXIM_THERMOCOUPLE is not set > # CONFIG_HID_SENSOR_TEMP is not set > # CONFIG_MLX90614 is not set > # CONFIG_MLX90632 is not set > # CONFIG_TMP006 is not set > # CONFIG_TMP007 is not set > # CONFIG_TMP117 is not set > # CONFIG_TSYS01 is not set > # CONFIG_TSYS02D is not set > # CONFIG_MAX30208 is not set > # CONFIG_MAX31856 is not set > # CONFIG_MAX31865 is not set > # end of Temperature sensors > > # CONFIG_NTB is not set > # CONFIG_PWM is not set > > # > # IRQ chip support > # > CONFIG_IRQCHIP=y > # CONFIG_AL_FIC is not set > # CONFIG_XILINX_INTC is not set > # end of IRQ chip support > > # CONFIG_IPACK_BUS is not set > # CONFIG_RESET_CONTROLLER is not set > > # > # PHY Subsystem > # > CONFIG_GENERIC_PHY=y > # CONFIG_PHY_CAN_TRANSCEIVER is not set > > # > # PHY drivers for Broadcom platforms > # > # CONFIG_BCM_KONA_USB2_PHY is not set > # end of PHY drivers for Broadcom platforms > > # CONFIG_PHY_CADENCE_TORRENT is not set > # CONFIG_PHY_CADENCE_DPHY is not set > # CONFIG_PHY_CADENCE_DPHY_RX is not set > # CONFIG_PHY_CADENCE_SALVO is not set > # CONFIG_PHY_PXA_28NM_HSIC is not set > # CONFIG_PHY_PXA_28NM_USB2 is not set > # CONFIG_PHY_CPCAP_USB is not set > # CONFIG_PHY_MAPPHONE_MDM6600 is not set > # end of PHY Subsystem > > # CONFIG_POWERCAP is not set > # CONFIG_MCB is not set > > # > # Performance monitor support > # > # end of Performance monitor support > > CONFIG_RAS=y > # CONFIG_USB4 is not set > > # > # Android > # > # CONFIG_ANDROID_BINDER_IPC is not set > # end of Android > > # CONFIG_DAX is not set > CONFIG_NVMEM=y > CONFIG_NVMEM_SYSFS=y > > # > # Layout Types > # > # CONFIG_NVMEM_LAYOUT_SL28_VPD is not set > # CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set > # end of Layout Types > > # CONFIG_NVMEM_RMEM is not set > > # > # HW tracing support > # > # CONFIG_STM is not set > # CONFIG_INTEL_TH is not set > # end of HW tracing support > > # CONFIG_FPGA is not set > # CONFIG_FSI is not set > CONFIG_PM_OPP=y > # CONFIG_SIOX is not set > # CONFIG_SLIMBUS is not set > # CONFIG_INTERCONNECT is not set > # CONFIG_COUNTER is not set > # CONFIG_MOST is not set > # CONFIG_PECI is not set > # CONFIG_HTE is not set > # end of Device Drivers > > # > # File systems > # > # CONFIG_VALIDATE_FS_PARSER is not set > CONFIG_FS_IOMAP=y > CONFIG_LEGACY_DIRECT_IO=y > # CONFIG_EXT2_FS is not set > # CONFIG_EXT3_FS is not set > CONFIG_EXT4_FS=m > CONFIG_EXT4_USE_FOR_EXT2=y > CONFIG_EXT4_FS_POSIX_ACL=y > CONFIG_EXT4_FS_SECURITY=y > # CONFIG_EXT4_DEBUG is not set > CONFIG_JBD2=m > # CONFIG_JBD2_DEBUG is not set > CONFIG_FS_MBCACHE=m > CONFIG_REISERFS_FS=m > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > CONFIG_REISERFS_FS_XATTR=y > CONFIG_REISERFS_FS_POSIX_ACL=y > CONFIG_REISERFS_FS_SECURITY=y > CONFIG_JFS_FS=m > CONFIG_JFS_POSIX_ACL=y > CONFIG_JFS_SECURITY=y > # CONFIG_JFS_DEBUG is not set > # CONFIG_JFS_STATISTICS is not set > CONFIG_XFS_FS=m > CONFIG_XFS_SUPPORT_V4=y > CONFIG_XFS_SUPPORT_ASCII_CI=y > CONFIG_XFS_QUOTA=y > CONFIG_XFS_POSIX_ACL=y > CONFIG_XFS_RT=y > # CONFIG_XFS_ONLINE_SCRUB is not set > # CONFIG_XFS_WARN is not set > # CONFIG_XFS_DEBUG is not set > CONFIG_GFS2_FS=m > CONFIG_GFS2_FS_LOCKING_DLM=y > CONFIG_OCFS2_FS=m > CONFIG_OCFS2_FS_O2CB=m > CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m > CONFIG_OCFS2_FS_STATS=y > CONFIG_OCFS2_DEBUG_MASKLOG=y > # CONFIG_OCFS2_DEBUG_FS is not set > CONFIG_BTRFS_FS=m > CONFIG_BTRFS_FS_POSIX_ACL=y > # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set > # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set > # CONFIG_BTRFS_DEBUG is not set > # CONFIG_BTRFS_ASSERT is not set > # CONFIG_BTRFS_FS_REF_VERIFY is not set > CONFIG_NILFS2_FS=m > CONFIG_F2FS_FS=m > CONFIG_F2FS_STAT_FS=y > CONFIG_F2FS_FS_XATTR=y > CONFIG_F2FS_FS_POSIX_ACL=y > CONFIG_F2FS_FS_SECURITY=y > # CONFIG_F2FS_CHECK_FS is not set > # CONFIG_F2FS_FAULT_INJECTION is not set > # CONFIG_F2FS_FS_COMPRESSION is not set > CONFIG_F2FS_IOSTAT=y > # CONFIG_F2FS_UNFAIR_RWSEM is not set > CONFIG_FS_POSIX_ACL=y > CONFIG_EXPORTFS=y > # CONFIG_EXPORTFS_BLOCK_OPS is not set > CONFIG_FILE_LOCKING=y > # CONFIG_FS_ENCRYPTION is not set > # CONFIG_FS_VERITY is not set > CONFIG_FSNOTIFY=y > CONFIG_DNOTIFY=y > CONFIG_INOTIFY_USER=y > CONFIG_FANOTIFY=y > # CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set > CONFIG_QUOTA=y > CONFIG_QUOTA_NETLINK_INTERFACE=y > # CONFIG_QUOTA_DEBUG is not set > CONFIG_QUOTA_TREE=m > CONFIG_QFMT_V1=m > CONFIG_QFMT_V2=m > CONFIG_QUOTACTL=y > # CONFIG_AUTOFS_FS is not set > CONFIG_FUSE_FS=m > CONFIG_CUSE=m > # CONFIG_VIRTIO_FS is not set > # CONFIG_OVERLAY_FS is not set > > # > # Caches > # > CONFIG_NETFS_SUPPORT=m > CONFIG_NETFS_STATS=y > CONFIG_FSCACHE=m > CONFIG_FSCACHE_STATS=y > # CONFIG_FSCACHE_DEBUG is not set > CONFIG_CACHEFILES=m > # CONFIG_CACHEFILES_DEBUG is not set > # CONFIG_CACHEFILES_ERROR_INJECTION is not set > # CONFIG_CACHEFILES_ONDEMAND is not set > # end of Caches > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=m > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > CONFIG_UDF_FS=m > # end of CD-ROM/DVD Filesystems > > # > # DOS/FAT/EXFAT/NT Filesystems > # > CONFIG_FAT_FS=m > CONFIG_MSDOS_FS=m > CONFIG_VFAT_FS=m > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="utf8" > # CONFIG_FAT_DEFAULT_UTF8 is not set > # CONFIG_EXFAT_FS is not set > CONFIG_NTFS_FS=m > # CONFIG_NTFS_DEBUG is not set > CONFIG_NTFS_RW=y > # CONFIG_NTFS3_FS is not set > # end of DOS/FAT/EXFAT/NT Filesystems > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_PROC_SYSCTL=y > CONFIG_PROC_PAGE_MONITOR=y > CONFIG_PROC_CHILDREN=y > CONFIG_KERNFS=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > CONFIG_TMPFS_POSIX_ACL=y > CONFIG_TMPFS_XATTR=y > CONFIG_MEMFD_CREATE=y > CONFIG_CONFIGFS_FS=m > # end of Pseudo filesystems > > CONFIG_MISC_FILESYSTEMS=y > # CONFIG_ORANGEFS_FS is not set > CONFIG_ADFS_FS=m > # CONFIG_ADFS_FS_RW is not set > CONFIG_AFFS_FS=m > CONFIG_ECRYPT_FS=m > CONFIG_ECRYPT_FS_MESSAGING=y > CONFIG_HFS_FS=m > CONFIG_HFSPLUS_FS=m > CONFIG_BEFS_FS=m > # CONFIG_BEFS_DEBUG is not set > CONFIG_BFS_FS=m > CONFIG_EFS_FS=m > CONFIG_CRAMFS=m > CONFIG_CRAMFS_BLOCKDEV=y > CONFIG_SQUASHFS=m > CONFIG_SQUASHFS_FILE_CACHE=y > # CONFIG_SQUASHFS_FILE_DIRECT is not set > CONFIG_SQUASHFS_DECOMP_SINGLE=y > # CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set > CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE=y > # CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set > # CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU is not set > CONFIG_SQUASHFS_XATTR=y > CONFIG_SQUASHFS_ZLIB=y > # CONFIG_SQUASHFS_LZ4 is not set > CONFIG_SQUASHFS_LZO=y > CONFIG_SQUASHFS_XZ=y > # CONFIG_SQUASHFS_ZSTD is not set > # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set > # CONFIG_SQUASHFS_EMBEDDED is not set > CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 > CONFIG_VXFS_FS=m > CONFIG_MINIX_FS=m > CONFIG_OMFS_FS=m > # CONFIG_HPFS_FS is not set > CONFIG_QNX4FS_FS=m > CONFIG_QNX6FS_FS=m > # CONFIG_QNX6FS_DEBUG is not set > CONFIG_ROMFS_FS=m > CONFIG_ROMFS_BACKED_BY_BLOCK=y > CONFIG_ROMFS_ON_BLOCK=y > # CONFIG_PSTORE is not set > CONFIG_SYSV_FS=m > CONFIG_UFS_FS=m > # CONFIG_UFS_FS_WRITE is not set > # CONFIG_UFS_DEBUG is not set > # CONFIG_EROFS_FS is not set > CONFIG_NETWORK_FILESYSTEMS=y > CONFIG_NFS_FS=m > CONFIG_NFS_V2=m > CONFIG_NFS_V3=m > CONFIG_NFS_V3_ACL=y > CONFIG_NFS_V4=m > CONFIG_NFS_SWAP=y > CONFIG_NFS_V4_1=y > CONFIG_NFS_V4_2=y > CONFIG_PNFS_FILE_LAYOUT=m > CONFIG_PNFS_BLOCK=m > CONFIG_PNFS_FLEXFILE_LAYOUT=m > CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" > # CONFIG_NFS_V4_1_MIGRATION is not set > CONFIG_NFS_V4_SECURITY_LABEL=y > CONFIG_NFS_FSCACHE=y > # CONFIG_NFS_USE_LEGACY_DNS is not set > CONFIG_NFS_USE_KERNEL_DNS=y > CONFIG_NFS_DEBUG=y > CONFIG_NFS_DISABLE_UDP_SUPPORT=y > # CONFIG_NFS_V4_2_READ_PLUS is not set > CONFIG_NFSD=m > # CONFIG_NFSD_V2 is not set > CONFIG_NFSD_V3_ACL=y > CONFIG_NFSD_V4=y > # CONFIG_NFSD_BLOCKLAYOUT is not set > # CONFIG_NFSD_SCSILAYOUT is not set > # CONFIG_NFSD_FLEXFILELAYOUT is not set > # CONFIG_NFSD_V4_2_INTER_SSC is not set > # CONFIG_NFSD_V4_SECURITY_LABEL is not set > CONFIG_GRACE_PERIOD=m > CONFIG_LOCKD=m > CONFIG_LOCKD_V4=y > CONFIG_NFS_ACL_SUPPORT=m > CONFIG_NFS_COMMON=y > CONFIG_NFS_V4_2_SSC_HELPER=y > CONFIG_SUNRPC=m > CONFIG_SUNRPC_GSS=m > CONFIG_SUNRPC_BACKCHANNEL=y > CONFIG_SUNRPC_SWAP=y > CONFIG_RPCSEC_GSS_KRB5=m > CONFIG_RPCSEC_GSS_KRB5_CRYPTOSYSTEM=y > # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_DES is not set > CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y > # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set > # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set > CONFIG_SUNRPC_DEBUG=y > CONFIG_SUNRPC_XPRT_RDMA=m > CONFIG_CEPH_FS=m > CONFIG_CEPH_FSCACHE=y > CONFIG_CEPH_FS_POSIX_ACL=y > # CONFIG_CEPH_FS_SECURITY_LABEL is not set > CONFIG_CIFS=m > CONFIG_CIFS_STATS2=y > CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y > CONFIG_CIFS_UPCALL=y > CONFIG_CIFS_XATTR=y > CONFIG_CIFS_POSIX=y > CONFIG_CIFS_DEBUG=y > # CONFIG_CIFS_DEBUG2 is not set > # CONFIG_CIFS_DEBUG_DUMP_KEYS is not set > CONFIG_CIFS_DFS_UPCALL=y > # CONFIG_CIFS_SWN_UPCALL is not set > # CONFIG_CIFS_SMB_DIRECT is not set > CONFIG_CIFS_FSCACHE=y > # CONFIG_SMB_SERVER is not set > CONFIG_SMBFS=m > CONFIG_CODA_FS=m > CONFIG_AFS_FS=m > # CONFIG_AFS_DEBUG is not set > CONFIG_AFS_FSCACHE=y > # CONFIG_AFS_DEBUG_CURSOR is not set > CONFIG_9P_FS=m > CONFIG_9P_FSCACHE=y > CONFIG_9P_FS_POSIX_ACL=y > CONFIG_9P_FS_SECURITY=y > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="utf8" > CONFIG_NLS_CODEPAGE_437=m > CONFIG_NLS_CODEPAGE_737=m > CONFIG_NLS_CODEPAGE_775=m > CONFIG_NLS_CODEPAGE_850=m > CONFIG_NLS_CODEPAGE_852=m > CONFIG_NLS_CODEPAGE_855=m > CONFIG_NLS_CODEPAGE_857=m > CONFIG_NLS_CODEPAGE_860=m > CONFIG_NLS_CODEPAGE_861=m > CONFIG_NLS_CODEPAGE_862=m > CONFIG_NLS_CODEPAGE_863=m > CONFIG_NLS_CODEPAGE_864=m > CONFIG_NLS_CODEPAGE_865=m > CONFIG_NLS_CODEPAGE_866=m > CONFIG_NLS_CODEPAGE_869=m > CONFIG_NLS_CODEPAGE_936=m > CONFIG_NLS_CODEPAGE_950=m > CONFIG_NLS_CODEPAGE_932=m > CONFIG_NLS_CODEPAGE_949=m > CONFIG_NLS_CODEPAGE_874=m > CONFIG_NLS_ISO8859_8=m > CONFIG_NLS_CODEPAGE_1250=m > CONFIG_NLS_CODEPAGE_1251=m > CONFIG_NLS_ASCII=m > CONFIG_NLS_ISO8859_1=m > CONFIG_NLS_ISO8859_2=m > CONFIG_NLS_ISO8859_3=m > CONFIG_NLS_ISO8859_4=m > CONFIG_NLS_ISO8859_5=m > CONFIG_NLS_ISO8859_6=m > CONFIG_NLS_ISO8859_7=m > CONFIG_NLS_ISO8859_9=m > CONFIG_NLS_ISO8859_13=m > CONFIG_NLS_ISO8859_14=m > CONFIG_NLS_ISO8859_15=m > CONFIG_NLS_KOI8_R=m > CONFIG_NLS_KOI8_U=m > CONFIG_NLS_MAC_ROMAN=m > CONFIG_NLS_MAC_CELTIC=m > CONFIG_NLS_MAC_CENTEURO=m > CONFIG_NLS_MAC_CROATIAN=m > CONFIG_NLS_MAC_CYRILLIC=m > CONFIG_NLS_MAC_GAELIC=m > CONFIG_NLS_MAC_GREEK=m > CONFIG_NLS_MAC_ICELAND=m > CONFIG_NLS_MAC_INUIT=m > CONFIG_NLS_MAC_ROMANIAN=m > CONFIG_NLS_MAC_TURKISH=m > CONFIG_NLS_UTF8=m > CONFIG_DLM=m > CONFIG_DLM_DEBUG=y > # CONFIG_UNICODE is not set > CONFIG_IO_WQ=y > # end of File systems > > # > # Security options > # > CONFIG_KEYS=y > # CONFIG_KEYS_REQUEST_CACHE is not set > # CONFIG_PERSISTENT_KEYRINGS is not set > # CONFIG_TRUSTED_KEYS is not set > # CONFIG_ENCRYPTED_KEYS is not set > # CONFIG_KEY_DH_OPERATIONS is not set > # CONFIG_SECURITY_DMESG_RESTRICT is not set > CONFIG_SECURITY=y > CONFIG_SECURITYFS=y > CONFIG_SECURITY_NETWORK=y > # CONFIG_SECURITY_INFINIBAND is not set > CONFIG_SECURITY_NETWORK_XFRM=y > CONFIG_SECURITY_PATH=y > CONFIG_LSM_MMAP_MIN_ADDR=32768 > # CONFIG_HARDENED_USERCOPY is not set > # CONFIG_FORTIFY_SOURCE is not set > # CONFIG_STATIC_USERMODEHELPER is not set > CONFIG_SECURITY_SELINUX=y > # CONFIG_SECURITY_SELINUX_BOOTPARAM is not set > CONFIG_SECURITY_SELINUX_DEVELOP=y > CONFIG_SECURITY_SELINUX_AVC_STATS=y > CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 > CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 > # CONFIG_SECURITY_SMACK is not set > CONFIG_SECURITY_TOMOYO=y > CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 > CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 > # CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set > CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" > CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" > # CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set > CONFIG_SECURITY_APPARMOR=y > # CONFIG_SECURITY_APPARMOR_DEBUG is not set > CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y > CONFIG_SECURITY_APPARMOR_HASH=y > CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y > CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y > CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y > # CONFIG_SECURITY_LOADPIN is not set > CONFIG_SECURITY_YAMA=y > # CONFIG_SECURITY_SAFESETID is not set > # CONFIG_SECURITY_LOCKDOWN_LSM is not set > # CONFIG_SECURITY_LANDLOCK is not set > CONFIG_INTEGRITY=y > # CONFIG_INTEGRITY_SIGNATURE is not set > CONFIG_INTEGRITY_AUDIT=y > # CONFIG_IMA is not set > # CONFIG_EVM is not set > # CONFIG_DEFAULT_SECURITY_SELINUX is not set > # CONFIG_DEFAULT_SECURITY_TOMOYO is not set > # CONFIG_DEFAULT_SECURITY_APPARMOR is not set > CONFIG_DEFAULT_SECURITY_DAC=y > CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,bpf" > > # > # Kernel hardening options > # > > # > # Memory initialization > # > CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y > CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y > CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y > # CONFIG_INIT_STACK_NONE is not set > # CONFIG_INIT_STACK_ALL_PATTERN is not set > CONFIG_INIT_STACK_ALL_ZERO=y > # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set > # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set > CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y > # CONFIG_ZERO_CALL_USED_REGS is not set > # end of Memory initialization > > CONFIG_RANDSTRUCT_NONE=y > # end of Kernel hardening options > # end of Security options > > CONFIG_XOR_BLOCKS=m > CONFIG_ASYNC_CORE=m > CONFIG_ASYNC_MEMCPY=m > CONFIG_ASYNC_XOR=m > CONFIG_ASYNC_PQ=m > CONFIG_ASYNC_RAID6_RECOV=m > CONFIG_CRYPTO=y > > # > # Crypto core or helper > # > CONFIG_CRYPTO_ALGAPI=y > CONFIG_CRYPTO_ALGAPI2=y > CONFIG_CRYPTO_AEAD=m > CONFIG_CRYPTO_AEAD2=y > CONFIG_CRYPTO_SIG2=y > CONFIG_CRYPTO_SKCIPHER=m > CONFIG_CRYPTO_SKCIPHER2=y > CONFIG_CRYPTO_HASH=y > CONFIG_CRYPTO_HASH2=y > CONFIG_CRYPTO_RNG=m > CONFIG_CRYPTO_RNG2=y > CONFIG_CRYPTO_RNG_DEFAULT=m > CONFIG_CRYPTO_AKCIPHER2=y > CONFIG_CRYPTO_AKCIPHER=y > CONFIG_CRYPTO_KPP2=y > CONFIG_CRYPTO_KPP=m > CONFIG_CRYPTO_ACOMP2=y > CONFIG_CRYPTO_MANAGER=y > CONFIG_CRYPTO_MANAGER2=y > # CONFIG_CRYPTO_USER is not set > # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set > # CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set > CONFIG_CRYPTO_NULL=m > CONFIG_CRYPTO_NULL2=m > # CONFIG_CRYPTO_CRYPTD is not set > CONFIG_CRYPTO_AUTHENC=m > CONFIG_CRYPTO_TEST=m > # end of Crypto core or helper > > # > # Public-key cryptography > # > CONFIG_CRYPTO_RSA=y > # CONFIG_CRYPTO_DH is not set > CONFIG_CRYPTO_ECC=m > CONFIG_CRYPTO_ECDH=m > # CONFIG_CRYPTO_ECDSA is not set > # CONFIG_CRYPTO_ECRDSA is not set > # CONFIG_CRYPTO_SM2 is not set > # CONFIG_CRYPTO_CURVE25519 is not set > # end of Public-key cryptography > > # > # Block ciphers > # > CONFIG_CRYPTO_AES=y > # CONFIG_CRYPTO_AES_TI is not set > CONFIG_CRYPTO_ANUBIS=m > # CONFIG_CRYPTO_ARIA is not set > CONFIG_CRYPTO_BLOWFISH=m > CONFIG_CRYPTO_BLOWFISH_COMMON=m > CONFIG_CRYPTO_CAMELLIA=m > CONFIG_CRYPTO_CAST_COMMON=m > CONFIG_CRYPTO_CAST5=m > CONFIG_CRYPTO_CAST6=m > CONFIG_CRYPTO_DES=m > CONFIG_CRYPTO_FCRYPT=m > CONFIG_CRYPTO_KHAZAD=m > CONFIG_CRYPTO_SEED=m > CONFIG_CRYPTO_SERPENT=m > # CONFIG_CRYPTO_SM4_GENERIC is not set > CONFIG_CRYPTO_TEA=m > CONFIG_CRYPTO_TWOFISH=m > CONFIG_CRYPTO_TWOFISH_COMMON=m > # end of Block ciphers > > # > # Length-preserving ciphers and modes > # > # CONFIG_CRYPTO_ADIANTUM is not set > CONFIG_CRYPTO_ARC4=m > # CONFIG_CRYPTO_CHACHA20 is not set > CONFIG_CRYPTO_CBC=m > # CONFIG_CRYPTO_CFB is not set > CONFIG_CRYPTO_CTR=m > CONFIG_CRYPTO_CTS=m > CONFIG_CRYPTO_ECB=m > # CONFIG_CRYPTO_HCTR2 is not set > # CONFIG_CRYPTO_KEYWRAP is not set > CONFIG_CRYPTO_LRW=m > # CONFIG_CRYPTO_OFB is not set > CONFIG_CRYPTO_PCBC=m > CONFIG_CRYPTO_XTS=m > # end of Length-preserving ciphers and modes > > # > # AEAD (authenticated encryption with associated data) ciphers > # > # CONFIG_CRYPTO_AEGIS128 is not set > # CONFIG_CRYPTO_CHACHA20POLY1305 is not set > CONFIG_CRYPTO_CCM=m > CONFIG_CRYPTO_GCM=m > CONFIG_CRYPTO_GENIV=m > CONFIG_CRYPTO_SEQIV=m > CONFIG_CRYPTO_ECHAINIV=m > CONFIG_CRYPTO_ESSIV=m > # end of AEAD (authenticated encryption with associated data) ciphers > > # > # Hashes, digests, and MACs > # > CONFIG_CRYPTO_BLAKE2B=m > CONFIG_CRYPTO_CMAC=m > CONFIG_CRYPTO_GHASH=m > CONFIG_CRYPTO_HMAC=m > CONFIG_CRYPTO_MD4=m > CONFIG_CRYPTO_MD5=y > CONFIG_CRYPTO_MICHAEL_MIC=m > # CONFIG_CRYPTO_POLY1305 is not set > CONFIG_CRYPTO_RMD160=m > CONFIG_CRYPTO_SHA1=y > CONFIG_CRYPTO_SHA256=y > CONFIG_CRYPTO_SHA512=m > CONFIG_CRYPTO_SHA3=m > # CONFIG_CRYPTO_SM3_GENERIC is not set > # CONFIG_CRYPTO_STREEBOG is not set > CONFIG_CRYPTO_VMAC=m > CONFIG_CRYPTO_WP512=m > CONFIG_CRYPTO_XCBC=m > CONFIG_CRYPTO_XXHASH=m > # end of Hashes, digests, and MACs > > # > # CRCs (cyclic redundancy checks) > # > CONFIG_CRYPTO_CRC32C=m > CONFIG_CRYPTO_CRC32=m > CONFIG_CRYPTO_CRCT10DIF=m > CONFIG_CRYPTO_CRC64_ROCKSOFT=m > # end of CRCs (cyclic redundancy checks) > > # > # Compression > # > CONFIG_CRYPTO_DEFLATE=m > CONFIG_CRYPTO_LZO=y > # CONFIG_CRYPTO_842 is not set > CONFIG_CRYPTO_LZ4=m > CONFIG_CRYPTO_LZ4HC=m > # CONFIG_CRYPTO_ZSTD is not set > # end of Compression > > # > # Random number generation > # > CONFIG_CRYPTO_ANSI_CPRNG=m > CONFIG_CRYPTO_DRBG_MENU=m > CONFIG_CRYPTO_DRBG_HMAC=y > # CONFIG_CRYPTO_DRBG_HASH is not set > # CONFIG_CRYPTO_DRBG_CTR is not set > CONFIG_CRYPTO_DRBG=m > CONFIG_CRYPTO_JITTERENTROPY=m > # CONFIG_CRYPTO_JITTERENTROPY_TESTINTERFACE is not set > # end of Random number generation > > # > # Userspace interface > # > CONFIG_CRYPTO_USER_API=m > CONFIG_CRYPTO_USER_API_HASH=m > CONFIG_CRYPTO_USER_API_SKCIPHER=m > # CONFIG_CRYPTO_USER_API_RNG is not set > # CONFIG_CRYPTO_USER_API_AEAD is not set > CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y > # end of Userspace interface > > CONFIG_CRYPTO_HASH_INFO=y > > # > # Accelerated Cryptographic Algorithms for CPU (powerpc) > # > # CONFIG_CRYPTO_MD5_PPC is not set > CONFIG_CRYPTO_SHA1_PPC=m > # end of Accelerated Cryptographic Algorithms for CPU (powerpc) > > CONFIG_CRYPTO_HW=y > CONFIG_CRYPTO_DEV_HIFN_795X=m > CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y > # CONFIG_CRYPTO_DEV_ATMEL_ECC is not set > # CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set > # CONFIG_CRYPTO_DEV_CHELSIO is not set > # CONFIG_CRYPTO_DEV_VIRTIO is not set > # CONFIG_CRYPTO_DEV_SAFEXCEL is not set > # CONFIG_CRYPTO_DEV_CCREE is not set > # CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set > CONFIG_ASYMMETRIC_KEY_TYPE=y > CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y > CONFIG_X509_CERTIFICATE_PARSER=y > # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set > CONFIG_PKCS7_MESSAGE_PARSER=y > # CONFIG_PKCS7_TEST_KEY is not set > # CONFIG_SIGNED_PE_FILE_VERIFICATION is not set > # CONFIG_FIPS_SIGNATURE_SELFTEST is not set > > # > # Certificates for signature checking > # > CONFIG_SYSTEM_TRUSTED_KEYRING=y > CONFIG_SYSTEM_TRUSTED_KEYS="" > # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set > # CONFIG_SECONDARY_TRUSTED_KEYRING is not set > # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set > # end of Certificates for signature checking > > CONFIG_BINARY_PRINTF=y > > # > # Library routines > # > CONFIG_RAID6_PQ=m > CONFIG_RAID6_PQ_BENCHMARK=y > # CONFIG_PACKING is not set > CONFIG_BITREVERSE=y > CONFIG_GENERIC_STRNCPY_FROM_USER=y > CONFIG_GENERIC_STRNLEN_USER=y > CONFIG_GENERIC_NET_UTILS=y > CONFIG_CORDIC=m > # CONFIG_PRIME_NUMBERS is not set > CONFIG_RATIONAL=y > CONFIG_GENERIC_PCI_IOMAP=y > > # > # Crypto library routines > # > CONFIG_CRYPTO_LIB_UTILS=y > CONFIG_CRYPTO_LIB_AES=y > CONFIG_CRYPTO_LIB_ARC4=m > CONFIG_CRYPTO_LIB_GF128MUL=m > CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y > # CONFIG_CRYPTO_LIB_CHACHA is not set > # CONFIG_CRYPTO_LIB_CURVE25519 is not set > CONFIG_CRYPTO_LIB_DES=m > CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 > # CONFIG_CRYPTO_LIB_POLY1305 is not set > # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set > CONFIG_CRYPTO_LIB_SHA1=y > CONFIG_CRYPTO_LIB_SHA256=y > # end of Crypto library routines > > CONFIG_CRC_CCITT=m > CONFIG_CRC16=m > CONFIG_CRC_T10DIF=m > CONFIG_CRC64_ROCKSOFT=m > CONFIG_CRC_ITU_T=m > CONFIG_CRC32=y > # CONFIG_CRC32_SELFTEST is not set > CONFIG_CRC32_SLICEBY8=y > # CONFIG_CRC32_SLICEBY4 is not set > # CONFIG_CRC32_SARWATE is not set > # CONFIG_CRC32_BIT is not set > CONFIG_CRC64=m > # CONFIG_CRC4 is not set > CONFIG_CRC7=m > CONFIG_LIBCRC32C=m > # CONFIG_CRC8 is not set > CONFIG_XXHASH=y > # CONFIG_RANDOM32_SELFTEST is not set > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=m > CONFIG_LZO_COMPRESS=y > CONFIG_LZO_DECOMPRESS=y > CONFIG_LZ4_COMPRESS=m > CONFIG_LZ4HC_COMPRESS=m > CONFIG_LZ4_DECOMPRESS=y > CONFIG_ZSTD_COMMON=y > CONFIG_ZSTD_COMPRESS=y > CONFIG_ZSTD_DECOMPRESS=y > CONFIG_XZ_DEC=y > # CONFIG_XZ_DEC_X86 is not set > CONFIG_XZ_DEC_POWERPC=y > # CONFIG_XZ_DEC_IA64 is not set > # CONFIG_XZ_DEC_ARM is not set > # CONFIG_XZ_DEC_ARMTHUMB is not set > # CONFIG_XZ_DEC_SPARC is not set > # CONFIG_XZ_DEC_MICROLZMA is not set > CONFIG_XZ_DEC_BCJ=y > # CONFIG_XZ_DEC_TEST is not set > CONFIG_DECOMPRESS_GZIP=y > CONFIG_DECOMPRESS_BZIP2=y > CONFIG_DECOMPRESS_LZMA=y > CONFIG_DECOMPRESS_XZ=y > CONFIG_DECOMPRESS_LZO=y > CONFIG_DECOMPRESS_LZ4=y > CONFIG_DECOMPRESS_ZSTD=y > CONFIG_GENERIC_ALLOCATOR=y > CONFIG_TEXTSEARCH=y > CONFIG_TEXTSEARCH_KMP=m > CONFIG_TEXTSEARCH_BM=m > CONFIG_TEXTSEARCH_FSM=m > CONFIG_BTREE=y > CONFIG_INTERVAL_TREE=y > CONFIG_XARRAY_MULTI=y > CONFIG_ASSOCIATIVE_ARRAY=y > CONFIG_HAS_IOMEM=y > CONFIG_HAS_IOPORT=y > CONFIG_HAS_IOPORT_MAP=y > CONFIG_HAS_DMA=y > CONFIG_NEED_SG_DMA_LENGTH=y > CONFIG_DMA_DECLARE_COHERENT=y > CONFIG_ARCH_DMA_DEFAULT_COHERENT=y > # CONFIG_DMA_API_DEBUG is not set > # CONFIG_DMA_MAP_BENCHMARK is not set > CONFIG_SGL_ALLOC=y > CONFIG_CHECK_SIGNATURE=y > CONFIG_DQL=y > CONFIG_GLOB=y > # CONFIG_GLOB_SELFTEST is not set > CONFIG_NLATTR=y > CONFIG_GENERIC_ATOMIC64=y > CONFIG_LRU_CACHE=m > CONFIG_CLZ_TAB=y > CONFIG_IRQ_POLL=y > CONFIG_MPILIB=y > CONFIG_DIMLIB=y > CONFIG_LIBFDT=y > CONFIG_OID_REGISTRY=y > CONFIG_HAVE_GENERIC_VDSO=y > CONFIG_GENERIC_GETTIMEOFDAY=y > CONFIG_GENERIC_VDSO_TIME_NS=y > CONFIG_FONT_SUPPORT=y > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > CONFIG_SG_POOL=y > CONFIG_ARCH_HAS_PMEM_API=y > CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y > CONFIG_ARCH_STACKWALK=y > CONFIG_STACKDEPOT=y > CONFIG_SBITMAP=y > # end of Library routines > > # > # Kernel hacking > # > > # > # printk and dmesg options > # > CONFIG_PRINTK_TIME=y > # CONFIG_PRINTK_CALLER is not set > # CONFIG_STACKTRACE_BUILD_ID is not set > CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 > CONFIG_CONSOLE_LOGLEVEL_QUIET=4 > CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 > CONFIG_DYNAMIC_DEBUG=y > CONFIG_DYNAMIC_DEBUG_CORE=y > CONFIG_SYMBOLIC_ERRNAME=y > CONFIG_DEBUG_BUGVERBOSE=y > # end of printk and dmesg options > > CONFIG_DEBUG_KERNEL=y > CONFIG_DEBUG_MISC=y > > # > # Compile-time checks and compiler options > # > CONFIG_AS_HAS_NON_CONST_LEB128=y > CONFIG_DEBUG_INFO_NONE=y > # CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set > # CONFIG_DEBUG_INFO_DWARF4 is not set > # CONFIG_DEBUG_INFO_DWARF5 is not set > CONFIG_FRAME_WARN=1024 > CONFIG_STRIP_ASM_SYMS=y > # CONFIG_READABLE_ASM is not set > # CONFIG_HEADERS_INSTALL is not set > # CONFIG_DEBUG_SECTION_MISMATCH is not set > CONFIG_SECTION_MISMATCH_WARN_ONLY=y > # CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set > CONFIG_OBJTOOL=y > # CONFIG_VMLINUX_MAP is not set > # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set > # end of Compile-time checks and compiler options > > # > # Generic Kernel Debugging Instruments > # > CONFIG_MAGIC_SYSRQ=y > CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 > CONFIG_MAGIC_SYSRQ_SERIAL=y > CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" > CONFIG_DEBUG_FS=y > CONFIG_DEBUG_FS_ALLOW_ALL=y > # CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set > # CONFIG_DEBUG_FS_ALLOW_NONE is not set > CONFIG_HAVE_ARCH_KGDB=y > # CONFIG_KGDB is not set > CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y > # CONFIG_UBSAN is not set > CONFIG_HAVE_ARCH_KCSAN=y > CONFIG_HAVE_KCSAN_COMPILER=y > # CONFIG_KCSAN is not set > # end of Generic Kernel Debugging Instruments > > # > # Networking Debugging > # > # CONFIG_NET_DEV_REFCNT_TRACKER is not set > # CONFIG_NET_NS_REFCNT_TRACKER is not set > # CONFIG_DEBUG_NET is not set > # end of Networking Debugging > > # > # Memory Debugging > # > # CONFIG_PAGE_EXTENSION is not set > CONFIG_SLUB_DEBUG=y > # CONFIG_SLUB_DEBUG_ON is not set > # CONFIG_PAGE_OWNER is not set > # CONFIG_PAGE_POISONING is not set > # CONFIG_DEBUG_PAGE_REF is not set > CONFIG_GENERIC_PTDUMP=y > # CONFIG_PTDUMP_DEBUGFS is not set > CONFIG_HAVE_DEBUG_KMEMLEAK=y > # CONFIG_DEBUG_KMEMLEAK is not set > # CONFIG_DEBUG_OBJECTS is not set > # CONFIG_SHRINKER_DEBUG is not set > # CONFIG_DEBUG_STACK_USAGE is not set > # CONFIG_SCHED_STACK_END_CHECK is not set > CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y > # CONFIG_DEBUG_VM is not set > # CONFIG_DEBUG_VM_PGTABLE is not set > CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y > # CONFIG_DEBUG_VIRTUAL is not set > CONFIG_DEBUG_MEMORY_INIT=y > # CONFIG_DEBUG_KMAP_LOCAL is not set > # CONFIG_DEBUG_HIGHMEM is not set > CONFIG_HAVE_DEBUG_STACKOVERFLOW=y > # CONFIG_DEBUG_STACKOVERFLOW is not set > CONFIG_HAVE_ARCH_KASAN=y > CONFIG_HAVE_ARCH_KASAN_VMALLOC=y > CONFIG_CC_HAS_KASAN_GENERIC=y > CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y > # CONFIG_KASAN is not set > CONFIG_HAVE_ARCH_KFENCE=y > # CONFIG_KFENCE is not set > # end of Memory Debugging > > # CONFIG_DEBUG_SHIRQ is not set > > # > # Debug Oops, Lockups and Hangs > # > # CONFIG_PANIC_ON_OOPS is not set > CONFIG_PANIC_ON_OOPS_VALUE=0 > # CONFIG_SOFTLOCKUP_DETECTOR is not set > CONFIG_DETECT_HUNG_TASK=y > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 > # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set > # CONFIG_WQ_WATCHDOG is not set > # CONFIG_WQ_CPU_INTENSIVE_REPORT is not set > # CONFIG_TEST_LOCKUP is not set > # end of Debug Oops, Lockups and Hangs > > # > # Scheduler Debugging > # > CONFIG_SCHED_DEBUG=y > CONFIG_SCHED_INFO=y > # CONFIG_SCHEDSTATS is not set > # end of Scheduler Debugging > > # CONFIG_DEBUG_TIMEKEEPING is not set > > # > # Lock Debugging (spinlocks, mutexes, etc...) > # > CONFIG_LOCK_DEBUGGING_SUPPORT=y > # CONFIG_PROVE_LOCKING is not set > # CONFIG_LOCK_STAT is not set > # CONFIG_DEBUG_RT_MUTEXES is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_MUTEXES is not set > # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set > # CONFIG_DEBUG_RWSEMS is not set > # CONFIG_DEBUG_LOCK_ALLOC is not set > # CONFIG_DEBUG_ATOMIC_SLEEP is not set > # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set > # CONFIG_LOCK_TORTURE_TEST is not set > # CONFIG_WW_MUTEX_SELFTEST is not set > # CONFIG_SCF_TORTURE_TEST is not set > # end of Lock Debugging (spinlocks, mutexes, etc...) > > # CONFIG_DEBUG_IRQFLAGS is not set > CONFIG_STACKTRACE=y > # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set > # CONFIG_DEBUG_KOBJECT is not set > > # > # Debug kernel data structures > # > # CONFIG_DEBUG_LIST is not set > # CONFIG_DEBUG_PLIST is not set > # CONFIG_DEBUG_SG is not set > # CONFIG_DEBUG_NOTIFIERS is not set > # CONFIG_BUG_ON_DATA_CORRUPTION is not set > # CONFIG_DEBUG_MAPLE_TREE is not set > # end of Debug kernel data structures > > # CONFIG_DEBUG_CREDENTIALS is not set > > # > # RCU Debugging > # > # CONFIG_RCU_SCALE_TEST is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_RCU_REF_SCALE_TEST is not set > # CONFIG_RCU_TRACE is not set > # CONFIG_RCU_EQS_DEBUG is not set > # end of RCU Debugging > > # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set > # CONFIG_LATENCYTOP is not set > # CONFIG_DEBUG_CGROUP_REF is not set > CONFIG_NOP_TRACER=y > CONFIG_HAVE_FUNCTION_TRACER=y > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y > CONFIG_HAVE_DYNAMIC_FTRACE=y > CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y > CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y > CONFIG_HAVE_SYSCALL_TRACEPOINTS=y > CONFIG_HAVE_OBJTOOL_MCOUNT=y > CONFIG_HAVE_C_RECORDMCOUNT=y > CONFIG_TRACER_MAX_TRACE=y > CONFIG_TRACE_CLOCK=y > CONFIG_RING_BUFFER=y > CONFIG_EVENT_TRACING=y > CONFIG_CONTEXT_SWITCH_TRACER=y > CONFIG_TRACING=y > CONFIG_GENERIC_TRACER=y > CONFIG_TRACING_SUPPORT=y > CONFIG_FTRACE=y > # CONFIG_BOOTTIME_TRACING is not set > CONFIG_FUNCTION_TRACER=y > CONFIG_FUNCTION_GRAPH_TRACER=y > CONFIG_DYNAMIC_FTRACE=y > CONFIG_DYNAMIC_FTRACE_WITH_REGS=y > CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y > # CONFIG_FUNCTION_PROFILER is not set > CONFIG_STACK_TRACER=y > # CONFIG_IRQSOFF_TRACER is not set > # CONFIG_SCHED_TRACER is not set > # CONFIG_HWLAT_TRACER is not set > # CONFIG_OSNOISE_TRACER is not set > # CONFIG_TIMERLAT_TRACER is not set > CONFIG_FTRACE_SYSCALLS=y > CONFIG_TRACER_SNAPSHOT=y > # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set > CONFIG_BRANCH_PROFILE_NONE=y > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set > # CONFIG_PROFILE_ALL_BRANCHES is not set > CONFIG_BLK_DEV_IO_TRACE=y > CONFIG_KPROBE_EVENTS=y > # CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set > CONFIG_UPROBE_EVENTS=y > CONFIG_DYNAMIC_EVENTS=y > CONFIG_PROBE_EVENTS=y > CONFIG_FTRACE_MCOUNT_RECORD=y > CONFIG_FTRACE_MCOUNT_USE_OBJTOOL=y > # CONFIG_SYNTH_EVENTS is not set > # CONFIG_USER_EVENTS is not set > # CONFIG_HIST_TRIGGERS is not set > # CONFIG_TRACE_EVENT_INJECT is not set > # CONFIG_TRACEPOINT_BENCHMARK is not set > # CONFIG_RING_BUFFER_BENCHMARK is not set > # CONFIG_TRACE_EVAL_MAP_FILE is not set > # CONFIG_FTRACE_RECORD_RECURSION is not set > # CONFIG_FTRACE_STARTUP_TEST is not set > # CONFIG_RING_BUFFER_STARTUP_TEST is not set > # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set > # CONFIG_PREEMPTIRQ_DELAY_TEST is not set > # CONFIG_KPROBE_EVENT_GEN_TEST is not set > # CONFIG_RV is not set > # CONFIG_SAMPLES is not set > CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y > CONFIG_STRICT_DEVMEM=y > # CONFIG_IO_STRICT_DEVMEM is not set > > # > # powerpc Debugging > # > CONFIG_PPC_DISABLE_WERROR=y > CONFIG_PRINT_STACK_DEPTH=64 > # CONFIG_PPC_EMULATED_STATS is not set > # CONFIG_CODE_PATCHING_SELFTEST is not set > CONFIG_JUMP_LABEL_FEATURE_CHECKS=y > # CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG is not set > # CONFIG_FTR_FIXUP_SELFTEST is not set > # CONFIG_MSI_BITMAP_SELFTEST is not set > CONFIG_XMON=y > # CONFIG_XMON_DEFAULT is not set > CONFIG_XMON_DISASSEMBLY=y > CONFIG_XMON_DEFAULT_RO_MODE=y > CONFIG_DEBUGGER=y > # CONFIG_BDI_SWITCH is not set > CONFIG_BOOTX_TEXT=y > # CONFIG_PPC_EARLY_DEBUG is not set > # end of powerpc Debugging > > # > # Kernel Testing and Coverage > # > # CONFIG_KUNIT is not set > # CONFIG_NOTIFIER_ERROR_INJECTION is not set > # CONFIG_FUNCTION_ERROR_INJECTION is not set > # CONFIG_FAULT_INJECTION is not set > CONFIG_ARCH_HAS_KCOV=y > CONFIG_CC_HAS_SANCOV_TRACE_PC=y > # CONFIG_KCOV is not set > CONFIG_RUNTIME_TESTING_MENU=y > # CONFIG_TEST_DHRY is not set > # CONFIG_LKDTM is not set > # CONFIG_TEST_MIN_HEAP is not set > # CONFIG_TEST_DIV64 is not set > # CONFIG_BACKTRACE_SELF_TEST is not set > # CONFIG_TEST_REF_TRACKER is not set > # CONFIG_RBTREE_TEST is not set > # CONFIG_REED_SOLOMON_TEST is not set > # CONFIG_INTERVAL_TREE_TEST is not set > # CONFIG_PERCPU_TEST is not set > # CONFIG_ATOMIC64_SELFTEST is not set > # CONFIG_ASYNC_RAID6_TEST is not set > # CONFIG_TEST_HEXDUMP is not set > # CONFIG_STRING_SELFTEST is not set > # CONFIG_TEST_STRING_HELPERS is not set > # CONFIG_TEST_KSTRTOX is not set > # CONFIG_TEST_PRINTF is not set > # CONFIG_TEST_SCANF is not set > # CONFIG_TEST_BITMAP is not set > # CONFIG_TEST_UUID is not set > # CONFIG_TEST_XARRAY is not set > # CONFIG_TEST_MAPLE_TREE is not set > # CONFIG_TEST_RHASHTABLE is not set > # CONFIG_TEST_IDA is not set > # CONFIG_TEST_LKM is not set > # CONFIG_TEST_BITOPS is not set > # CONFIG_TEST_VMALLOC is not set > # CONFIG_TEST_USER_COPY is not set > # CONFIG_TEST_BPF is not set > # CONFIG_TEST_BLACKHOLE_DEV is not set > # CONFIG_FIND_BIT_BENCHMARK is not set > # CONFIG_TEST_FIRMWARE is not set > # CONFIG_TEST_SYSCTL is not set > # CONFIG_TEST_UDELAY is not set > # CONFIG_TEST_STATIC_KEYS is not set > # CONFIG_TEST_DYNAMIC_DEBUG is not set > # CONFIG_TEST_KMOD is not set > # CONFIG_TEST_MEMCAT_P is not set > # CONFIG_TEST_MEMINIT is not set > # CONFIG_TEST_FREE_PAGES is not set > CONFIG_ARCH_USE_MEMTEST=y > # CONFIG_MEMTEST is not set > # end of Kernel Testing and Coverage > > # > # Rust hacking > # > # end of Rust hacking > # end of Kernel hacking ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-06 17:23 ` Paul E. McKenney @ 2023-09-06 17:29 ` Liam R. Howlett 2023-09-06 18:02 ` Paul E. McKenney 0 siblings, 1 reply; 43+ messages in thread From: Liam R. Howlett @ 2023-09-06 17:29 UTC (permalink / raw) To: Paul E. McKenney Cc: Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > Apologies on the late response, I was away and have been struggling to > > get a working PPC32 test environment. > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > Hi Liam, > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > The current implementation of append may cause duplicate data and/or > > > > incorrect ranges to be returned to a reader during an update. Although > > > > this has not been reported or seen, disable the append write operation > > > > while the tree is in rcu mode out of an abundance of caution. > > > > ... > > > > > > > > Fixes: 54a611b60590 ("Maple Tree: add new data structure") > > > > Cc: stable@vger.kernel.org > > > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > > > > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > > > ("maple_tree: disable mas_wr_append() when other readers are > > > possible") in v6.5, and is being backported to stable. > > > > > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > > > following warning: > > > > > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > > > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > > > /soc/timer@e803b000: used for clocksource > > > /soc/timer@e803c000: used for clock events > > > +------------[ cut here ]------------ > > > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > > > +Interrupts were enabled early > > > > Note that the maple tree is involved in tracking the interrupts, see > > kernel/irq/irqdesc.c irq_insert_desc(), etc. > > > > > +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 > > > > I cannot find commit id 99b80d6b92b5. > > > > > +Hardware name: Generic R7S9210 (Flattened Device Tree) > > > + unwind_backtrace from show_stack+0x10/0x14 > > > + show_stack from dump_stack_lvl+0x24/0x3c > > > + dump_stack_lvl from __warn+0x74/0xb8 > > > + __warn from warn_slowpath_fmt+0x78/0xb0 > > > + warn_slowpath_fmt from start_kernel+0x2f0/0x480 > > > + start_kernel from 0x0 > > > +---[ end trace 0000000000000000 ]--- > > > Console: colour dummy device 80x30 > > > printk: console [tty0] enabled > > > Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000) > > > > > > Reverting this commit fixes the issue. > > > > I have set up testing with qemu for powerpc 32b, and reverting this > > patch does not fix it for me. Did you revert the patch or bisect to the > > issue? > > > > It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to > > get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is > > as follows: > > > > qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" > > -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048 > > -hda powerpc32.img -nographic -kernel <file> > > > > > > > > > > RCU-related configs: > > > > > > $ grep RCU .config > > > # RCU Subsystem > > > CONFIG_TINY_RCU=y > > > # CONFIG_RCU_EXPERT is not set > > > CONFIG_TINY_SRCU=y > > > # end of RCU Subsystem > > > # RCU Debugging > > > # CONFIG_RCU_SCALE_TEST is not set > > > # CONFIG_RCU_TORTURE_TEST is not set > > > # CONFIG_RCU_REF_SCALE_TEST is not set > > > # CONFIG_RCU_TRACE is not set > > > # CONFIG_RCU_EQS_DEBUG is not set > > > # end of RCU Debugging > > > > I used the configuration from debian 8 and ran 'make oldconfig' to build > > my kernel. I have attached the configuration. > > > > > > > > CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, > > > as CONFIG_* is reserved for kernel configuration options). > > > > Thanks, I'll add it to my list of work. > > > > > > > > I do not see this issue on any other platform > > > (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > > > RCU configuration. > > > > > > Do you have a clue? > > > > It appears to be something to do with struct maple_tree sparse_irqs. If > > you drop the rcu flag from that maple tree, then my configuration boots > > without the warning. > > > > I *think* this is because we will reuse a lot more nodes. And I *think* > > the rcu flag is not needed, since there is a comment about reading the > > tree being protected by the mutex sparse_irq_lock within the > > kernel/irq/irqdesc.c file. Shanker, can you comment on that? > > > > I wonder if there is a limit to the number of RCU free events before > > something is triggered to flush them out which could trigger IRQ > > enabling? Paul, could this be the case? > > Are you asking if call_rcu() will re-enable interrupts in the following > use case? > > local_irq_disable(); > call_rcu(&p->rh, my_cb_func); > local_irq_enable(); > > If so, the answer is "no" (and yes, there might be a bug, but then again > I just double-checked). However, if interrupts are enabled across a > call_rcu() invocation, it will do some additional work to encourage > the grace period. Even if interrupts are disabled across a call_rcu() > invocation, it will still do either a raise_softirq() or a wakeup, > depending on configuration, to encourage the grace period. And in > the case of call_rcu() from an interrupt handler, that raise_softirq() > could result in the RCU_SOFTIRQ handler running upon return from that > interrupt, and if there are a great many callbacks ready to invoke, > this RCU_SOFTIRQ handler might take quite some time. Plus that > handler could itself be interrupted. > > If long-running RCU_SOFTIRQ handlers are a problem, you can boot with > rcutree.use_softirq=0, which puts that handler into a kthread, which > in turn give the scheduler more control. However, this will also turn > a lightweight raise_softirq() into a rather heavier weight wakeup. > Choose wisely! ;-) > > Or am I missing your point? > This is very early in the boot sequence when interrupts have not been enabled. What we are seeing is a WARN_ON() that is triggered by interrupts being enabled before they should be enabled. I was wondering if, for example, I called call_rcu() a lot *before* interrupts were enabled, that something could trigger that would either enable interrupts or indicate the task needs rescheduling? Specifically the rescheduling part is suspect. I tracked down the call to a mutex_lock() which calls cond_resched(), so could rcu be 'encouraging' the rcu window by a reschedule request? Thanks, Liam ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-06 17:29 ` Liam R. Howlett @ 2023-09-06 18:02 ` Paul E. McKenney 2023-09-11 23:54 ` Liam R. Howlett 0 siblings, 1 reply; 43+ messages in thread From: Paul E. McKenney @ 2023-09-06 18:02 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > Apologies on the late response, I was away and have been struggling to > > > get a working PPC32 test environment. > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > Hi Liam, > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > The current implementation of append may cause duplicate data and/or > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > this has not been reported or seen, disable the append write operation > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > ... > > > > > > > > > > Fixes: 54a611b60590 ("Maple Tree: add new data structure") > > > > > Cc: stable@vger.kernel.org > > > > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > > > > > > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > > > > ("maple_tree: disable mas_wr_append() when other readers are > > > > possible") in v6.5, and is being backported to stable. > > > > > > > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > > > > following warning: > > > > > > > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > > > > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > > > > /soc/timer@e803b000: used for clocksource > > > > /soc/timer@e803c000: used for clock events > > > > +------------[ cut here ]------------ > > > > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > > > > +Interrupts were enabled early > > > > > > Note that the maple tree is involved in tracking the interrupts, see > > > kernel/irq/irqdesc.c irq_insert_desc(), etc. > > > > > > > +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 > > > > > > I cannot find commit id 99b80d6b92b5. > > > > > > > +Hardware name: Generic R7S9210 (Flattened Device Tree) > > > > + unwind_backtrace from show_stack+0x10/0x14 > > > > + show_stack from dump_stack_lvl+0x24/0x3c > > > > + dump_stack_lvl from __warn+0x74/0xb8 > > > > + __warn from warn_slowpath_fmt+0x78/0xb0 > > > > + warn_slowpath_fmt from start_kernel+0x2f0/0x480 > > > > + start_kernel from 0x0 > > > > +---[ end trace 0000000000000000 ]--- > > > > Console: colour dummy device 80x30 > > > > printk: console [tty0] enabled > > > > Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000) > > > > > > > > Reverting this commit fixes the issue. > > > > > > I have set up testing with qemu for powerpc 32b, and reverting this > > > patch does not fix it for me. Did you revert the patch or bisect to the > > > issue? > > > > > > It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to > > > get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is > > > as follows: > > > > > > qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" > > > -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048 > > > -hda powerpc32.img -nographic -kernel <file> > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > $ grep RCU .config > > > > # RCU Subsystem > > > > CONFIG_TINY_RCU=y > > > > # CONFIG_RCU_EXPERT is not set > > > > CONFIG_TINY_SRCU=y > > > > # end of RCU Subsystem > > > > # RCU Debugging > > > > # CONFIG_RCU_SCALE_TEST is not set > > > > # CONFIG_RCU_TORTURE_TEST is not set > > > > # CONFIG_RCU_REF_SCALE_TEST is not set > > > > # CONFIG_RCU_TRACE is not set > > > > # CONFIG_RCU_EQS_DEBUG is not set > > > > # end of RCU Debugging > > > > > > I used the configuration from debian 8 and ran 'make oldconfig' to build > > > my kernel. I have attached the configuration. > > > > > > > > > > > CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, > > > > as CONFIG_* is reserved for kernel configuration options). > > > > > > Thanks, I'll add it to my list of work. > > > > > > > > > > > I do not see this issue on any other platform > > > > (arm/arm64/risc-v/mips/sh/m68k), several of them use the same > > > > RCU configuration. > > > > > > > > Do you have a clue? > > > > > > It appears to be something to do with struct maple_tree sparse_irqs. If > > > you drop the rcu flag from that maple tree, then my configuration boots > > > without the warning. > > > > > > I *think* this is because we will reuse a lot more nodes. And I *think* > > > the rcu flag is not needed, since there is a comment about reading the > > > tree being protected by the mutex sparse_irq_lock within the > > > kernel/irq/irqdesc.c file. Shanker, can you comment on that? > > > > > > I wonder if there is a limit to the number of RCU free events before > > > something is triggered to flush them out which could trigger IRQ > > > enabling? Paul, could this be the case? > > > > Are you asking if call_rcu() will re-enable interrupts in the following > > use case? > > > > local_irq_disable(); > > call_rcu(&p->rh, my_cb_func); > > local_irq_enable(); > > > > If so, the answer is "no" (and yes, there might be a bug, but then again > > I just double-checked). However, if interrupts are enabled across a > > call_rcu() invocation, it will do some additional work to encourage > > the grace period. Even if interrupts are disabled across a call_rcu() > > invocation, it will still do either a raise_softirq() or a wakeup, > > depending on configuration, to encourage the grace period. And in > > the case of call_rcu() from an interrupt handler, that raise_softirq() > > could result in the RCU_SOFTIRQ handler running upon return from that > > interrupt, and if there are a great many callbacks ready to invoke, > > this RCU_SOFTIRQ handler might take quite some time. Plus that > > handler could itself be interrupted. > > > > If long-running RCU_SOFTIRQ handlers are a problem, you can boot with > > rcutree.use_softirq=0, which puts that handler into a kthread, which > > in turn give the scheduler more control. However, this will also turn > > a lightweight raise_softirq() into a rather heavier weight wakeup. > > Choose wisely! ;-) > > > > Or am I missing your point? > > This is very early in the boot sequence when interrupts have not been > enabled. What we are seeing is a WARN_ON() that is triggered by > interrupts being enabled before they should be enabled. > > I was wondering if, for example, I called call_rcu() a lot *before* > interrupts were enabled, that something could trigger that would either > enable interrupts or indicate the task needs rescheduling? You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU callback invocations won't happen until some time after the scheduler starts up. > Specifically the rescheduling part is suspect. I tracked down the call > to a mutex_lock() which calls cond_resched(), so could rcu be > 'encouraging' the rcu window by a reschedule request? During boot before interrupts are enabled, RCU has not yet spawned any of its kthreads. Therefore, all of its attempts to do wakeups would notice a NULL task_struct pointer and refrain from actually doing the wakeup. If it did do the wakeup, you would see a NULL-pointer exception. See for example, invoke_rcu_core_kthread(), though that won't happen unless you booted with rcutree.use_softirq=0. Besides, since when did doing a wakeup enable interrupts? That would make it hard to do wakeups from hardware interrupt handlers, not? But why not put some WARN_ON_ONCE(!irqs_disabled()) calls in the areas of greatest suspicion, starting from the stack trace generated by that mutex_lock()? A stray interrupt-enable could be pretty much anywhere. But where are those call_rcu() invocations? Before rcu_init()? Presumably before init is spawned and the early_init() calls. And what is the RCU-related Kconfig and boot-parameter setup? Thanx, Paul ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-06 18:02 ` Paul E. McKenney @ 2023-09-11 23:54 ` Liam R. Howlett 2023-09-12 8:14 ` Paul E. McKenney 2023-09-12 14:10 ` Matthew Wilcox 0 siblings, 2 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-11 23:54 UTC (permalink / raw) To: Paul E. McKenney Cc: Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > get a working PPC32 test environment. > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > Hi Liam, > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > this has not been reported or seen, disable the append write operation > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > ... > > > > > > ... > > > > > RCU-related configs: > > > > > > > > > > $ grep RCU .config > > > > > # RCU Subsystem > > > > > CONFIG_TINY_RCU=y > > > > > # CONFIG_RCU_EXPERT is not set > > > > > CONFIG_TINY_SRCU=y > > > > > # end of RCU Subsystem > > > > > # RCU Debugging > > > > > # CONFIG_RCU_SCALE_TEST is not set > > > > > # CONFIG_RCU_TORTURE_TEST is not set > > > > > # CONFIG_RCU_REF_SCALE_TEST is not set > > > > > # CONFIG_RCU_TRACE is not set > > > > > # CONFIG_RCU_EQS_DEBUG is not set > > > > > # end of RCU Debugging > > > > > > > > I used the configuration from debian 8 and ran 'make oldconfig' to build > > > > my kernel. I have attached the configuration. ... > > > > It appears to be something to do with struct maple_tree sparse_irqs. If > > > > you drop the rcu flag from that maple tree, then my configuration boots > > > > without the warning. > > > > > > > > I *think* this is because we will reuse a lot more nodes. And I *think* > > > > the rcu flag is not needed, since there is a comment about reading the > > > > tree being protected by the mutex sparse_irq_lock within the > > > > kernel/irq/irqdesc.c file. Shanker, can you comment on that? > > > > > > > > I wonder if there is a limit to the number of RCU free events before > > > > something is triggered to flush them out which could trigger IRQ > > > > enabling? Paul, could this be the case? > > > > > > Are you asking if call_rcu() will re-enable interrupts in the following > > > use case? > > > > > > local_irq_disable(); > > > call_rcu(&p->rh, my_cb_func); > > > local_irq_enable(); I am not. ... > > > > > > Or am I missing your point? > > > > This is very early in the boot sequence when interrupts have not been > > enabled. What we are seeing is a WARN_ON() that is triggered by > > interrupts being enabled before they should be enabled. > > > > I was wondering if, for example, I called call_rcu() a lot *before* > > interrupts were enabled, that something could trigger that would either > > enable interrupts or indicate the task needs rescheduling? > > You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU > callback invocations won't happen until some time after the scheduler > starts up. I am not, it's just a detection of IRQs being enabled early. > > > Specifically the rescheduling part is suspect. I tracked down the call > > to a mutex_lock() which calls cond_resched(), so could rcu be > > 'encouraging' the rcu window by a reschedule request? > > During boot before interrupts are enabled, RCU has not yet spawned any of > its kthreads. Therefore, all of its attempts to do wakeups would notice > a NULL task_struct pointer and refrain from actually doing the wakeup. > If it did do the wakeup, you would see a NULL-pointer exception. See > for example, invoke_rcu_core_kthread(), though that won't happen unless > you booted with rcutree.use_softirq=0. > > Besides, since when did doing a wakeup enable interrupts? That would > make it hard to do wakeups from hardware interrupt handlers, not? Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a cond_resched(). From what Michael said [1] in this thread, since something has already set TIF_NEED_RESCHED, it will eventually enable interrupts on us. I've traced this to running call_rcu() in kernel/rcu/tiny.c and is_idle_task(current) is true, which means rcu runs: /* force scheduling for rcu_qs() */ resched_cpu(0); the task is set idle in sched_init() -> init_idle() and never changed, afaict. Removing the RCU option from the maple tree in kernel/irq/irqdesc.c fixes the issue by avoiding the maple tree running call_rcu(). I am not sure on the locking of the tree so I feel this change may cause other issues...also it's before lockdep_init(), so any issue I introduce may not be detected. When CONFIG_DEBUG_ATOMIC_SLEEP is configured, it seems that rcu does the same thing, but the IRQs are not enabled on return. So, resched_cpu(0) is called, but the IRQs warning of enabled isn't triggered. I failed to find a reason why. I am not entirely sure what makes ppc32 different than other platforms in that the initial task is configured to an idle task and the first call to call_rcu (tiny!) would cause the observed behaviour. Non-tiny rcu calls (as I am sure you know, but others may not) kernel/rcu/tree.c which in turn calls __call_rcu_common(). That function is far more complex than the tiny version. Maybe it's part of why we see different behaviour based on platforms? I don't see an idle check in that version of call_rcu(). Or maybe PPC32 has something set incorrectly to cause this failure in early boot and I've just found something that needs to be set differently? > > But why not put some WARN_ON_ONCE(!irqs_disabled()) calls in the areas > of greatest suspicion, starting from the stack trace generated by that > mutex_lock()? A stray interrupt-enable could be pretty much anywhere. > > But where are those call_rcu() invocations? Before rcu_init()? During init_IRQ(), which is after rcu_init() but before rcu_init_nohz(), srcu_init(), and softirq_init() in init/main.c start_kernel(). > Presumably before init is spawned and the early_init() calls. > > And what is the RCU-related Kconfig and boot-parameter setup? The .config was attached to the email I sent, and it matches what was quoted above in the "RCU-related configs" section. [1] https://lore.kernel.org/linux-mm/87v8cv22jh.fsf@mail.lhotse/ ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-11 23:54 ` Liam R. Howlett @ 2023-09-12 8:14 ` Paul E. McKenney 2023-09-12 8:23 ` Geert Uytterhoeven 2023-09-12 14:37 ` Christophe Leroy 2023-09-12 14:10 ` Matthew Wilcox 1 sibling, 2 replies; 43+ messages in thread From: Paul E. McKenney @ 2023-09-12 8:14 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > get a working PPC32 test environment. > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > Hi Liam, > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > ... > > > > > > > > > ... > > > > > > > RCU-related configs: > > > > > > > > > > > > $ grep RCU .config > > > > > > # RCU Subsystem > > > > > > CONFIG_TINY_RCU=y I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/ However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code. TL;DR: 1. Try making the __setup_irq() function's call to mutex_lock() instead be as follows: if (!mutex_trylock(&desc->request_mutex)) mutex_lock(&desc->request_mutex); This might fail if __setup_irq() has other dependencies on a fully operational scheduler. 2. Move that ppc32 call to __setup_irq() much later, most definitely after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-) For more detail, please read on! > > > > > > # CONFIG_RCU_EXPERT is not set > > > > > > CONFIG_TINY_SRCU=y > > > > > > # end of RCU Subsystem > > > > > > # RCU Debugging > > > > > > # CONFIG_RCU_SCALE_TEST is not set > > > > > > # CONFIG_RCU_TORTURE_TEST is not set > > > > > > # CONFIG_RCU_REF_SCALE_TEST is not set > > > > > > # CONFIG_RCU_TRACE is not set > > > > > > # CONFIG_RCU_EQS_DEBUG is not set > > > > > > # end of RCU Debugging > > > > > > > > > > I used the configuration from debian 8 and ran 'make oldconfig' to build > > > > > my kernel. I have attached the configuration. > > ... > > > > > > It appears to be something to do with struct maple_tree sparse_irqs. If > > > > > you drop the rcu flag from that maple tree, then my configuration boots > > > > > without the warning. > > > > > > > > > > I *think* this is because we will reuse a lot more nodes. And I *think* > > > > > the rcu flag is not needed, since there is a comment about reading the > > > > > tree being protected by the mutex sparse_irq_lock within the > > > > > kernel/irq/irqdesc.c file. Shanker, can you comment on that? > > > > > > > > > > I wonder if there is a limit to the number of RCU free events before > > > > > something is triggered to flush them out which could trigger IRQ > > > > > enabling? Paul, could this be the case? > > > > > > > > Are you asking if call_rcu() will re-enable interrupts in the following > > > > use case? > > > > > > > > local_irq_disable(); > > > > call_rcu(&p->rh, my_cb_func); > > > > local_irq_enable(); > > I am not. > > ... > > > > > > > > > Or am I missing your point? > > > > > > This is very early in the boot sequence when interrupts have not been > > > enabled. What we are seeing is a WARN_ON() that is triggered by > > > interrupts being enabled before they should be enabled. > > > > > > I was wondering if, for example, I called call_rcu() a lot *before* > > > interrupts were enabled, that something could trigger that would either > > > enable interrupts or indicate the task needs rescheduling? > > > > You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU > > callback invocations won't happen until some time after the scheduler > > starts up. > > I am not, it's just a detection of IRQs being enabled early. > > > > > > Specifically the rescheduling part is suspect. I tracked down the call > > > to a mutex_lock() which calls cond_resched(), so could rcu be > > > 'encouraging' the rcu window by a reschedule request? > > > > During boot before interrupts are enabled, RCU has not yet spawned any of > > its kthreads. Therefore, all of its attempts to do wakeups would notice > > a NULL task_struct pointer and refrain from actually doing the wakeup. > > If it did do the wakeup, you would see a NULL-pointer exception. See > > for example, invoke_rcu_core_kthread(), though that won't happen unless > > you booted with rcutree.use_softirq=0. > > > > Besides, since when did doing a wakeup enable interrupts? That would > > make it hard to do wakeups from hardware interrupt handlers, not? > > Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a > cond_resched(). > > >From what Michael said [1] in this thread, since something has already > set TIF_NEED_RESCHED, it will eventually enable interrupts on us. > > I've traced this to running call_rcu() in kernel/rcu/tiny.c and > is_idle_task(current) is true, which means rcu runs: > /* force scheduling for rcu_qs() */ > resched_cpu(0); > > the task is set idle in sched_init() -> init_idle() and never changed, > afaict. Yes, because RCU eventually needs a context switch in order to make a grace period happen. And Maple Tree isn't the only thing invoking call_rcu() early, so this has been in place for a very long time. > Removing the RCU option from the maple tree in kernel/irq/irqdesc.c > fixes the issue by avoiding the maple tree running call_rcu(). I am not > sure on the locking of the tree so I feel this change may cause other > issues...also it's before lockdep_init(), so any issue I introduce may > not be detected. > > When CONFIG_DEBUG_ATOMIC_SLEEP is configured, it seems that rcu does the > same thing, but the IRQs are not enabled on return. So, resched_cpu(0) > is called, but the IRQs warning of enabled isn't triggered. I failed to > find a reason why. Here you mean IRQs being enabled upon return from __setup_irq(), correct? But yes, __setup_irq() does call mutex_lock(). Which will call preempt_schedule_common() via might_sleep() and __cond_resched(), even though that is clearly a very bad thing this early. And let's face it, the whole purpose of mutex_lock() is to block when needed. And a big purpose of that might_sleep() is to yell at people invoking this with interrupts disabled. And most of the wrappers around __setup_irq() look to be intended for much later, after interrupts have been enabled. One exception is setup_percpu_irq(), which says that it is for "the early boot process", whenever that might be. But this is only invoked from mips in v6.5. The __request_percpu_irq() function is wrappered by request_percpu_irq(), and its header comment suggests that it is to be called after there are multiple CPUs. I am not seeing a call that is obviously from ppc32, but there are a number of drivers using this with which I am unfamiliar. The request_percpu_nmi() has to be followed up on each CPU using prepare_percpu_nmi() and enable_percpu_nmi(), so it is not clear that it is useful to invoke this before interrupts are enabled. But this is used by ARM, not ppc32 from what I can see. So even though I am not seeing how ppc32 invokes __setup_irq() early, your testing clearly indicates that it is doing so. > I am not entirely sure what makes ppc32 different than other platforms > in that the initial task is configured to an idle task and the first > call to call_rcu (tiny!) would cause the observed behaviour. Maybe something like this in __setup_irq(), right before the mutex_lock()? WARN_ON_ONCE(irqs_disabled()); This will dump the stack trace showing how __setup_irq() is being invoked in early boot on ppc32. Again, given that __setup_irq() invokes mutex_lock(), invoking this function in its current form before interrupts have been enabled is a bad idea. > Non-tiny rcu calls (as I am sure you know, but others may not) > kernel/rcu/tree.c which in turn calls __call_rcu_common(). That > function is far more complex than the tiny version. Maybe it's part of > why we see different behaviour based on platforms? I don't see an idle > check in that version of call_rcu(). Tree RCU can rely on the grace-period kthread starting up later in boot. This kthread will handle any need for a grace period from early boot invocation of call_rcu(). Tiny RCU does not have such a kthread, hence the resched_cpu(). Which is fine, as long as nothing (incorrectly!) invokes a blocking operation before the scheduler has been initialized. > Or maybe PPC32 has something set incorrectly to cause this failure in > early boot and I've just found something that needs to be set > differently? This might be a failure of imagination on my part, but I certainly don't see why ppc32 should expect to get away with invoking __setup_irq() anywhere near that early! ;-) But if ppc32 cannot be adjusted so as to invoke __setup_irq() later, the following change to __setup_irq() might work: if (!mutex_trylock(&desc->request_mutex)) mutex_lock(&desc->request_mutex); The reason for "might" rather than "will" is that __setup_irq() might well have other dependencies on the scheduler being up and running. It would be cleaner for that ppc32 call to __setup_irq() to be moved later, after the scheduler is up and running. > > But why not put some WARN_ON_ONCE(!irqs_disabled()) calls in the areas > > of greatest suspicion, starting from the stack trace generated by that > > mutex_lock()? A stray interrupt-enable could be pretty much anywhere. > > > > But where are those call_rcu() invocations? Before rcu_init()? > > During init_IRQ(), which is after rcu_init() but before rcu_init_nohz(), > srcu_init(), and softirq_init() in init/main.c start_kernel(). That is a perfectly legal time and place for a call_rcu() invocation. It is also legal before rcu_init(), but it has to be late enough that things like per-CPU variables are accessible. Which is still very early. > > Presumably before init is spawned and the early_init() calls. > > > > And what is the RCU-related Kconfig and boot-parameter setup? > > The .config was attached to the email I sent, and it matches what was > quoted above in the "RCU-related configs" section. > > [1] https://lore.kernel.org/linux-mm/87v8cv22jh.fsf@mail.lhotse/ Again, apologies for having misread that .config snippet!!! Thanx, Paul ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 8:14 ` Paul E. McKenney @ 2023-09-12 8:23 ` Geert Uytterhoeven 2023-09-12 8:30 ` Paul E. McKenney 2023-09-12 14:37 ` Christophe Leroy 1 sibling, 1 reply; 43+ messages in thread From: Geert Uytterhoeven @ 2023-09-12 8:23 UTC (permalink / raw) To: paulmck Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni Hi Paul, On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > Hi Liam, > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > ... > > > > > > > > > > > > ... > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > # RCU Subsystem > > > > > > > CONFIG_TINY_RCU=y > > I must have been asleep last time I looked at this. I was looking at > Tree RCU. Please accept my apologies for my lapse. :-/ > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > have said the same thing, albeit after looking at a lot less RCU code. > > TL;DR: > > 1. Try making the __setup_irq() function's call to mutex_lock() > instead be as follows: > > if (!mutex_trylock(&desc->request_mutex)) > mutex_lock(&desc->request_mutex); > > This might fail if __setup_irq() has other dependencies on a > fully operational scheduler. > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > after interrupts have been enabled and the scheduler is fully > operational. Invoking mutex_lock() before that time is not a > good idea. ;-) There is no call to __setup_irq() from arch/powerpc/? Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems). I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^. Thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 8:23 ` Geert Uytterhoeven @ 2023-09-12 8:30 ` Paul E. McKenney 2023-09-12 8:34 ` Geert Uytterhoeven 0 siblings, 1 reply; 43+ messages in thread From: Paul E. McKenney @ 2023-09-12 8:30 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > Hi Paul, > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > ... > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > # RCU Subsystem > > > > > > > > CONFIG_TINY_RCU=y > > > > I must have been asleep last time I looked at this. I was looking at > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > have said the same thing, albeit after looking at a lot less RCU code. > > > > TL;DR: > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > instead be as follows: > > > > if (!mutex_trylock(&desc->request_mutex)) > > mutex_lock(&desc->request_mutex); > > > > This might fail if __setup_irq() has other dependencies on a > > fully operational scheduler. > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > after interrupts have been enabled and the scheduler is fully > > operational. Invoking mutex_lock() before that time is not a > > good idea. ;-) > > There is no call to __setup_irq() from arch/powerpc/? Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq(). Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-) > Note that there are (possibly different) issues seen on ppc32 and on arm32 > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > cfeb6ae8bcb96ccf^. I look forward to hearing what is the issue in both cases. Thanx, Paul > Thanks! > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 8:30 ` Paul E. McKenney @ 2023-09-12 8:34 ` Geert Uytterhoeven 2023-09-12 10:00 ` Paul E. McKenney 0 siblings, 1 reply; 43+ messages in thread From: Geert Uytterhoeven @ 2023-09-12 8:34 UTC (permalink / raw) To: paulmck Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni Hi Paul, On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > # RCU Subsystem > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > I must have been asleep last time I looked at this. I was looking at > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > TL;DR: > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > instead be as follows: > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > mutex_lock(&desc->request_mutex); > > > > > > This might fail if __setup_irq() has other dependencies on a > > > fully operational scheduler. > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > after interrupts have been enabled and the scheduler is fully > > > operational. Invoking mutex_lock() before that time is not a > > > good idea. ;-) > > > > There is no call to __setup_irq() from arch/powerpc/? > > Glad it is not just me, given that I didn't see a direct call, either. So > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > just before that mutex_lock() in __setup_irq(). > > Either way, invoking mutex_lock() early in boot before interrupts have > been enabled is a bad idea. ;-) I'll add that WARN_ON_ONCE() too, and will report back later today... > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > cfeb6ae8bcb96ccf^. > > I look forward to hearing what is the issue in both cases. For RZ/A, my problem report is https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ Thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 8:34 ` Geert Uytterhoeven @ 2023-09-12 10:00 ` Paul E. McKenney 2023-09-12 13:56 ` Liam R. Howlett 2023-09-13 13:14 ` Geert Uytterhoeven 0 siblings, 2 replies; 43+ messages in thread From: Paul E. McKenney @ 2023-09-12 10:00 UTC (permalink / raw) To: Geert Uytterhoeven Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > Hi Paul, > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > # RCU Subsystem > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > TL;DR: > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > instead be as follows: > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > mutex_lock(&desc->request_mutex); > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > fully operational scheduler. > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > after interrupts have been enabled and the scheduler is fully > > > > operational. Invoking mutex_lock() before that time is not a > > > > good idea. ;-) > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > just before that mutex_lock() in __setup_irq(). > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > been enabled is a bad idea. ;-) > > I'll add that WARN_ON_ONCE() too, and will report back later today... Thank you, looking forward to hearing the outcome! > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > cfeb6ae8bcb96ccf^. > > > > I look forward to hearing what is the issue in both cases. > > For RZ/A, my problem report is > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ Thank you, Geert! Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled? If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep(). Thanx, Paul ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 10:00 ` Paul E. McKenney @ 2023-09-12 13:56 ` Liam R. Howlett 2023-09-12 14:29 ` Liam R. Howlett 2023-09-12 15:07 ` Paul E. McKenney 2023-09-13 13:14 ` Geert Uytterhoeven 1 sibling, 2 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 13:56 UTC (permalink / raw) To: Paul E. McKenney Cc: Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > Hi Paul, > > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > TL;DR: > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > instead be as follows: > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > fully operational scheduler. > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > after interrupts have been enabled and the scheduler is fully > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > good idea. ;-) > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > just before that mutex_lock() in __setup_irq(). I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings: kernel/irq/manage.c:1587 __setup_irq: [ 0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable) [ 0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4 [ 0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8 [ 0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c [ 0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4 Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock. > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > been enabled is a bad idea. ;-) > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > Thank you, looking forward to hearing the outcome! > > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > cfeb6ae8bcb96ccf^. > > > > > > I look forward to hearing what is the issue in both cases. > > > > For RZ/A, my problem report is > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > Thank you, Geert! > > Huh. Is that patch you reverted causing Maple Tree or related code > to attempt to acquire mutexes in early boot before interrupts have > been enabled? > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > would be to put it at the beginning of mutex_lock(). Or for that matter > at the beginning of might_sleep(). Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu(). So my findings summarized: 1. My change to the maple tree makes call_rcu() more likely on early boot. 2. The initial thread setup is always set to idle state 3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current) 4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set. I don't know which of these things is "wrong". I also looked into the mtmsr register but decided to consult you lot about my findings in hopes that someone with more knowledge of the platform or early boot would alleviate the pain so that I could context switch or sleep :) I mean, an mtmsr bug seems like a leap even for the issues I create.. Regards, Liam ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 13:56 ` Liam R. Howlett @ 2023-09-12 14:29 ` Liam R. Howlett 2023-09-12 15:08 ` Paul E. McKenney 2023-09-12 15:07 ` Paul E. McKenney 1 sibling, 1 reply; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 14:29 UTC (permalink / raw) To: Paul E. McKenney, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Liam R. Howlett <Liam.Howlett@Oracle.com> [230912 09:56]: > * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > > Hi Paul, > > > > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > > > TL;DR: > > > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > > instead be as follows: > > > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > > fully operational scheduler. This changes where the interrupts become enabled, but doesn't stop it from happening. It still throws a WARN after init_IRQ(). I suspect it is not the way to proceed as there are probably many places that will need to be changed in both common and arch specific code. As soon as TIF_NEED_RESCHED is set, then all the checks will need to be altered. I think we either need to set the boot thread to !idle, avoid call_rcu() to set TIF_NEED_RESCHED (how was this working before? Do we need rcu for the IRQs?), or alter the boot order (note this is NOT arch or platform code here). I don't like any of these. I'd like another option, please? > > > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > > after interrupts have been enabled and the scheduler is fully > > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > > good idea. ;-) > > > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > > just before that mutex_lock() in __setup_irq(). Oh, and also: arch/powerpc/platforms/powermac/setup.c: .init_IRQ = pmac_pic_init, > > I had already found that this is the mutex lock that is enabling them. > I surrounded the mutex lock to ensure it was not enabled before, but was > after. Here is the findings: > > kernel/irq/manage.c:1587 __setup_irq: > [ 0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable) > [ 0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4 > [ 0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8 > [ 0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c > [ 0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4 > > Note your line number will be slightly different due to my debug. This > is the WARN _after_ the mutex lock. > > > > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > > been enabled is a bad idea. ;-) > > > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > > > Thank you, looking forward to hearing the outcome! > > > > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > > cfeb6ae8bcb96ccf^. > > > > > > > > I look forward to hearing what is the issue in both cases. > > > > > > For RZ/A, my problem report is > > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > > > Thank you, Geert! > > > > Huh. Is that patch you reverted causing Maple Tree or related code > > to attempt to acquire mutexes in early boot before interrupts have > > been enabled? > > > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > > would be to put it at the beginning of mutex_lock(). Or for that matter > > at the beginning of might_sleep(). > > Yeah, I put many WARN() calls through the code as well as tracking down > where TIF_NEED_RESCHED was set; the tiny.c call_rcu(). > > > So my findings summarized: > > 1. My change to the maple tree makes call_rcu() more likely on early boot. > 2. The initial thread setup is always set to idle state > 3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current) > 4. init_IRQ() takes a mutex lock which will enable the interrupts since > TIF_NEED_RESCHED is set. > > I don't know which of these things is "wrong". > > I also looked into the mtmsr register but decided to consult you lot > about my findings in hopes that someone with more knowledge of the > platform or early boot would alleviate the pain so that I could context > switch or sleep :) I mean, an mtmsr bug seems like a leap even for the > issues I create.. > > Regards, > Liam > > > -- > maple-tree mailing list > maple-tree@lists.infradead.org > https://lists.infradead.org/mailman/listinfo/maple-tree ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 14:29 ` Liam R. Howlett @ 2023-09-12 15:08 ` Paul E. McKenney 2023-09-12 15:27 ` Christophe Leroy 0 siblings, 1 reply; 43+ messages in thread From: Paul E. McKenney @ 2023-09-12 15:08 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Tue, Sep 12, 2023 at 10:29:30AM -0400, Liam R. Howlett wrote: > * Liam R. Howlett <Liam.Howlett@Oracle.com> [230912 09:56]: > > * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > > > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > > > Hi Paul, > > > > > > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > > > > > TL;DR: > > > > > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > > > instead be as follows: > > > > > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > > > fully operational scheduler. > > This changes where the interrupts become enabled, but doesn't stop it > from happening. It still throws a WARN after init_IRQ(). I suspect it > is not the way to proceed as there are probably many places that will > need to be changed in both common and arch specific code. As soon as > TIF_NEED_RESCHED is set, then all the checks will need to be altered. Thank you for trying it! > I think we either need to set the boot thread to !idle, avoid call_rcu() > to set TIF_NEED_RESCHED (how was this working before? Do we need rcu > for the IRQs?), or alter the boot order (note this is NOT arch or > platform code here). > > I don't like any of these. I'd like another option, please? My favorite is to move the interrupt enabling later, but Michael Ellerman would know better than would I about the feasibility of this. Thanx, Paul > > > > > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > > > after interrupts have been enabled and the scheduler is fully > > > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > > > good idea. ;-) > > > > > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > > > just before that mutex_lock() in __setup_irq(). > > Oh, and also: > arch/powerpc/platforms/powermac/setup.c: .init_IRQ = pmac_pic_init, > > > > > I had already found that this is the mutex lock that is enabling them. > > I surrounded the mutex lock to ensure it was not enabled before, but was > > after. Here is the findings: > > > > kernel/irq/manage.c:1587 __setup_irq: > > [ 0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable) > > [ 0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4 > > [ 0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8 > > [ 0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c > > [ 0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4 > > > > Note your line number will be slightly different due to my debug. This > > is the WARN _after_ the mutex lock. > > > > > > > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > > > been enabled is a bad idea. ;-) > > > > > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > > > > > Thank you, looking forward to hearing the outcome! > > > > > > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > > > cfeb6ae8bcb96ccf^. > > > > > > > > > > I look forward to hearing what is the issue in both cases. > > > > > > > > For RZ/A, my problem report is > > > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > > > > > Thank you, Geert! > > > > > > Huh. Is that patch you reverted causing Maple Tree or related code > > > to attempt to acquire mutexes in early boot before interrupts have > > > been enabled? > > > > > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > > > would be to put it at the beginning of mutex_lock(). Or for that matter > > > at the beginning of might_sleep(). > > > > Yeah, I put many WARN() calls through the code as well as tracking down > > where TIF_NEED_RESCHED was set; the tiny.c call_rcu(). > > > > > > So my findings summarized: > > > > 1. My change to the maple tree makes call_rcu() more likely on early boot. > > 2. The initial thread setup is always set to idle state > > 3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current) > > 4. init_IRQ() takes a mutex lock which will enable the interrupts since > > TIF_NEED_RESCHED is set. > > > > I don't know which of these things is "wrong". > > > > I also looked into the mtmsr register but decided to consult you lot > > about my findings in hopes that someone with more knowledge of the > > platform or early boot would alleviate the pain so that I could context > > switch or sleep :) I mean, an mtmsr bug seems like a leap even for the > > issues I create.. > > > > Regards, > > Liam > > > > > > -- > > maple-tree mailing list > > maple-tree@lists.infradead.org > > https://lists.infradead.org/mailman/listinfo/maple-tree ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 15:08 ` Paul E. McKenney @ 2023-09-12 15:27 ` Christophe Leroy 2023-09-12 15:49 ` Liam R. Howlett 0 siblings, 1 reply; 43+ messages in thread From: Christophe Leroy @ 2023-09-12 15:27 UTC (permalink / raw) To: paulmck@kernel.org, Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni Le 12/09/2023 à 17:08, Paul E. McKenney a écrit : > On Tue, Sep 12, 2023 at 10:29:30AM -0400, Liam R. Howlett wrote: >> * Liam R. Howlett <Liam.Howlett@Oracle.com> [230912 09:56]: >>> * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: >>>> On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: >>>>> Hi Paul, >>>>> >>>>> On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: >>>>>> On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: >>>>>>> On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: >>>>>>>> On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: >>>>>>>>> * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: >>>>>>>>>> On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: >>>>>>>>>>> * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: >>>>>>>>>>>> On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: >>>>>>>>>>>>> (Adding Paul & Shanker to Cc list.. please see below for why) >>>>>>>>>>>>> >>>>>>>>>>>>> Apologies on the late response, I was away and have been struggling to >>>>>>>>>>>>> get a working PPC32 test environment. >>>>>>>>>>>>> >>>>>>>>>>>>> * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: >>>>>>>>>>>>>> Hi Liam, >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Fri, 18 Aug 2023, Liam R. Howlett wrote: >>>>>>>>>>>>>>> The current implementation of append may cause duplicate data and/or >>>>>>>>>>>>>>> incorrect ranges to be returned to a reader during an update. Although >>>>>>>>>>>>>>> this has not been reported or seen, disable the append write operation >>>>>>>>>>>>>>> while the tree is in rcu mode out of an abundance of caution. >>>>>>>>>>>>> >>>>>>>>>>>>> ... >>>>>>>>>>>>>>> >>>>>>>>> >>>>>>>>> ... >>>>>>>>> >>>>>>>>>>>>>> RCU-related configs: >>>>>>>>>>>>>> >>>>>>>>>>>>>> $ grep RCU .config >>>>>>>>>>>>>> # RCU Subsystem >>>>>>>>>>>>>> CONFIG_TINY_RCU=y >>>>>>>> >>>>>>>> I must have been asleep last time I looked at this. I was looking at >>>>>>>> Tree RCU. Please accept my apologies for my lapse. :-/ >>>>>>>> >>>>>>>> However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would >>>>>>>> have said the same thing, albeit after looking at a lot less RCU code. >>>>>>>> >>>>>>>> TL;DR: >>>>>>>> >>>>>>>> 1. Try making the __setup_irq() function's call to mutex_lock() >>>>>>>> instead be as follows: >>>>>>>> >>>>>>>> if (!mutex_trylock(&desc->request_mutex)) >>>>>>>> mutex_lock(&desc->request_mutex); >>>>>>>> >>>>>>>> This might fail if __setup_irq() has other dependencies on a >>>>>>>> fully operational scheduler. >> >> This changes where the interrupts become enabled, but doesn't stop it >> from happening. It still throws a WARN after init_IRQ(). I suspect it >> is not the way to proceed as there are probably many places that will >> need to be changed in both common and arch specific code. As soon as >> TIF_NEED_RESCHED is set, then all the checks will need to be altered. > > Thank you for trying it! > >> I think we either need to set the boot thread to !idle, avoid call_rcu() >> to set TIF_NEED_RESCHED (how was this working before? Do we need rcu >> for the IRQs?), or alter the boot order (note this is NOT arch or >> platform code here). >> >> I don't like any of these. I'd like another option, please? > > My favorite is to move the interrupt enabling later, but Michael Ellerman > would know better than would I about the feasibility of this. > I digged into it a bit more, looks like IRQs get enabled by the call to cond_resched() in the loop in vm_area_alloc_pages(), which is called from powerpc's init_IRQ() fonction when allocating IRQ stacks. And IRQ stacks definitely need to be enabled before IRQs get enabled, so there's something wrong here isn't it ? Christophe ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 15:27 ` Christophe Leroy @ 2023-09-12 15:49 ` Liam R. Howlett 0 siblings, 0 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 15:49 UTC (permalink / raw) To: Christophe Leroy Cc: paulmck@kernel.org, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni * Christophe Leroy <christophe.leroy@csgroup.eu> [230912 11:27]: > > > Le 12/09/2023 à 17:08, Paul E. McKenney a écrit : > > On Tue, Sep 12, 2023 at 10:29:30AM -0400, Liam R. Howlett wrote: > >> * Liam R. Howlett <Liam.Howlett@Oracle.com> [230912 09:56]: > >>> * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > >>>> On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > >>>>> Hi Paul, > >>>>> > >>>>> On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > >>>>>> On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > >>>>>>> On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > >>>>>>>> On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > >>>>>>>>> * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > >>>>>>>>>> On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > >>>>>>>>>>> * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > >>>>>>>>>>>> On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > >>>>>>>>>>>>> (Adding Paul & Shanker to Cc list.. please see below for why) > >>>>>>>>>>>>> > >>>>>>>>>>>>> Apologies on the late response, I was away and have been struggling to > >>>>>>>>>>>>> get a working PPC32 test environment. > >>>>>>>>>>>>> > >>>>>>>>>>>>> * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > >>>>>>>>>>>>>> Hi Liam, > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> On Fri, 18 Aug 2023, Liam R. Howlett wrote: > >>>>>>>>>>>>>>> The current implementation of append may cause duplicate data and/or > >>>>>>>>>>>>>>> incorrect ranges to be returned to a reader during an update. Although > >>>>>>>>>>>>>>> this has not been reported or seen, disable the append write operation > >>>>>>>>>>>>>>> while the tree is in rcu mode out of an abundance of caution. > >>>>>>>>>>>>> > >>>>>>>>>>>>> ... > >>>>>>>>>>>>>>> > >>>>>>>>> > >>>>>>>>> ... > >>>>>>>>> > >>>>>>>>>>>>>> RCU-related configs: > >>>>>>>>>>>>>> > >>>>>>>>>>>>>> $ grep RCU .config > >>>>>>>>>>>>>> # RCU Subsystem > >>>>>>>>>>>>>> CONFIG_TINY_RCU=y > >>>>>>>> > >>>>>>>> I must have been asleep last time I looked at this. I was looking at > >>>>>>>> Tree RCU. Please accept my apologies for my lapse. :-/ > >>>>>>>> > >>>>>>>> However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > >>>>>>>> have said the same thing, albeit after looking at a lot less RCU code. > >>>>>>>> > >>>>>>>> TL;DR: > >>>>>>>> > >>>>>>>> 1. Try making the __setup_irq() function's call to mutex_lock() > >>>>>>>> instead be as follows: > >>>>>>>> > >>>>>>>> if (!mutex_trylock(&desc->request_mutex)) > >>>>>>>> mutex_lock(&desc->request_mutex); > >>>>>>>> > >>>>>>>> This might fail if __setup_irq() has other dependencies on a > >>>>>>>> fully operational scheduler. > >> > >> This changes where the interrupts become enabled, but doesn't stop it > >> from happening. It still throws a WARN after init_IRQ(). I suspect it > >> is not the way to proceed as there are probably many places that will > >> need to be changed in both common and arch specific code. As soon as > >> TIF_NEED_RESCHED is set, then all the checks will need to be altered. > > > > Thank you for trying it! > > > >> I think we either need to set the boot thread to !idle, avoid call_rcu() > >> to set TIF_NEED_RESCHED (how was this working before? Do we need rcu > >> for the IRQs?), or alter the boot order (note this is NOT arch or > >> platform code here). > >> > >> I don't like any of these. I'd like another option, please? > > > > My favorite is to move the interrupt enabling later, but Michael Ellerman > > would know better than would I about the feasibility of this. > > > > I digged into it a bit more, looks like IRQs get enabled by the call to > cond_resched() in the loop in vm_area_alloc_pages(), which is called > from powerpc's init_IRQ() fonction when allocating IRQ stacks. This is another location where the process will enable IRQs because TIF_NEED_RESCHED was set. > > And IRQ stacks definitely need to be enabled before IRQs get enabled, so > there's something wrong here isn't it ? ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 13:56 ` Liam R. Howlett 2023-09-12 14:29 ` Liam R. Howlett @ 2023-09-12 15:07 ` Paul E. McKenney 2023-09-12 15:44 ` Liam R. Howlett 1 sibling, 1 reply; 43+ messages in thread From: Paul E. McKenney @ 2023-09-12 15:07 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Tue, Sep 12, 2023 at 09:56:17AM -0400, Liam R. Howlett wrote: > * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > > Hi Paul, > > > > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > > > TL;DR: > > > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > > instead be as follows: > > > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > > fully operational scheduler. > > > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > > after interrupts have been enabled and the scheduler is fully > > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > > good idea. ;-) > > > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > > just before that mutex_lock() in __setup_irq(). > > I had already found that this is the mutex lock that is enabling them. > I surrounded the mutex lock to ensure it was not enabled before, but was > after. Here is the findings: > > kernel/irq/manage.c:1587 __setup_irq: > [ 0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable) > [ 0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4 > [ 0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8 > [ 0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c > [ 0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4 > > Note your line number will be slightly different due to my debug. This > is the WARN _after_ the mutex lock. > > > > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > > been enabled is a bad idea. ;-) > > > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > > > Thank you, looking forward to hearing the outcome! > > > > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > > cfeb6ae8bcb96ccf^. > > > > > > > > I look forward to hearing what is the issue in both cases. > > > > > > For RZ/A, my problem report is > > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > > > Thank you, Geert! > > > > Huh. Is that patch you reverted causing Maple Tree or related code > > to attempt to acquire mutexes in early boot before interrupts have > > been enabled? > > > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > > would be to put it at the beginning of mutex_lock(). Or for that matter > > at the beginning of might_sleep(). > > Yeah, I put many WARN() calls through the code as well as tracking down > where TIF_NEED_RESCHED was set; the tiny.c call_rcu(). > > > So my findings summarized: > > 1. My change to the maple tree makes call_rcu() more likely on early boot. > 2. The initial thread setup is always set to idle state > 3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current) > 4. init_IRQ() takes a mutex lock which will enable the interrupts since > TIF_NEED_RESCHED is set. > > I don't know which of these things is "wrong". Doing early-boot call_rcu() is OK. The initial thread eventually becomes the idle thread for the boot CPU. See rest_init() in init/main.c. I can certainly make Tiny call_rcu() refrain from invoking resched_cpu() during boot, as shown in the (untested) patch below. This might result in boot-time hangs, though. The thought of doing mutex_lock() before interrupts are enabled on the boot CPU strikes me as very wrong. Others might argue that the fact that __might_resched() explicitly avoids complaining when system_state is equal to SYSTEM_BOOTING constitutes evidence that such calls are OK. (Which might be why enabling debug suppressed the problem.) Except that if you actually try sleeping at that time, nothing good can possibly happen. So my question is why is it useful to setup interrupts that early, given that interrupts cannot possibly happen until the boot CPU enables them? > I also looked into the mtmsr register but decided to consult you lot > about my findings in hopes that someone with more knowledge of the > platform or early boot would alleviate the pain so that I could context > switch or sleep :) I mean, an mtmsr bug seems like a leap even for the > issues I create.. Stranger things have happened, but I agree that this would indeed be quite strange! ;-) Thanx, Paul ------------------------------------------------------------------------ diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c index fec804b79080..f00fb0855e4b 100644 --- a/kernel/rcu/tiny.c +++ b/kernel/rcu/tiny.c @@ -192,7 +192,7 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func) rcu_ctrlblk.curtail = &head->next; local_irq_restore(flags); - if (unlikely(is_idle_task(current))) { + if (unlikely(is_idle_task(current)) && system_state > SYSTEM_BOOTING) { /* force scheduling for rcu_qs() */ resched_cpu(0); } ^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 15:07 ` Paul E. McKenney @ 2023-09-12 15:44 ` Liam R. Howlett 2023-09-12 16:49 ` Paul E. McKenney 2023-09-12 17:09 ` Christophe Leroy 0 siblings, 2 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 15:44 UTC (permalink / raw) To: Paul E. McKenney Cc: Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Paul E. McKenney <paulmck@kernel.org> [230912 11:07]: > On Tue, Sep 12, 2023 at 09:56:17AM -0400, Liam R. Howlett wrote: > > * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > > > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > > > Hi Paul, > > > > > > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > > > > > TL;DR: > > > > > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > > > instead be as follows: > > > > > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > > > fully operational scheduler. > > > > > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > > > after interrupts have been enabled and the scheduler is fully > > > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > > > good idea. ;-) > > > > > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > > > just before that mutex_lock() in __setup_irq(). > > > > I had already found that this is the mutex lock that is enabling them. > > I surrounded the mutex lock to ensure it was not enabled before, but was > > after. Here is the findings: > > > > kernel/irq/manage.c:1587 __setup_irq: > > [ 0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable) > > [ 0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4 > > [ 0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8 > > [ 0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c > > [ 0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4 > > > > Note your line number will be slightly different due to my debug. This > > is the WARN _after_ the mutex lock. > > > > > > > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > > > been enabled is a bad idea. ;-) > > > > > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > > > > > Thank you, looking forward to hearing the outcome! > > > > > > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > > > cfeb6ae8bcb96ccf^. > > > > > > > > > > I look forward to hearing what is the issue in both cases. > > > > > > > > For RZ/A, my problem report is > > > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > > > > > Thank you, Geert! > > > > > > Huh. Is that patch you reverted causing Maple Tree or related code > > > to attempt to acquire mutexes in early boot before interrupts have > > > been enabled? > > > > > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > > > would be to put it at the beginning of mutex_lock(). Or for that matter > > > at the beginning of might_sleep(). > > > > Yeah, I put many WARN() calls through the code as well as tracking down > > where TIF_NEED_RESCHED was set; the tiny.c call_rcu(). > > > > > > So my findings summarized: > > > > 1. My change to the maple tree makes call_rcu() more likely on early boot. > > 2. The initial thread setup is always set to idle state > > 3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current) > > 4. init_IRQ() takes a mutex lock which will enable the interrupts since > > TIF_NEED_RESCHED is set. > > > > I don't know which of these things is "wrong". > > Doing early-boot call_rcu() is OK. > > The initial thread eventually becomes the idle thread for the boot CPU. > See rest_init() in init/main.c. > > I can certainly make Tiny call_rcu() refrain from invoking resched_cpu() > during boot, as shown in the (untested) patch below. This might result in > boot-time hangs, though. If we set the current thread as !idle, then we don't need to add overhead to every call_rcu(), and you've already tracked down where I need to change the flags back to idle. Patch below. > > The thought of doing mutex_lock() before interrupts are enabled on the > boot CPU strikes me as very wrong. Others might argue that the fact > that __might_resched() explicitly avoids complaining when system_state > is equal to SYSTEM_BOOTING constitutes evidence that such calls are OK. > (Which might be why enabling debug suppressed the problem.) Except that > if you actually try sleeping at that time, nothing good can possibly > happen. Does lockdep check for SYSTEM_BOOTING as well? That could be another reason? > > So my question is why is it useful to setup interrupts that early, given > that interrupts cannot possibly happen until the boot CPU enables them? I don't know for sure, but there are 'preallocated IRQs' which end up grouped 0-15, then I see another one added at 55 after the mpic console output. I suspect it's so that they can be added as they are discovered during early boot? The below is not fully tested, but qemu stops throwing the warning on boot and it doesn't add instructions to call_rcu(). ------------------------------------------------------------------------ diff --git a/init/main.c b/init/main.c index dbe1fe76be34..fd4739918a94 100644 --- a/init/main.c +++ b/init/main.c @@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void) */ rcu_read_lock(); tsk = find_task_by_pid_ns(pid, &init_pid_ns); - tsk->flags |= PF_NO_SETAFFINITY; + tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE; set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id())); rcu_read_unlock(); @@ -943,6 +943,7 @@ void start_kernel(void) * time - but meanwhile we still have a functioning scheduler. */ sched_init(); + current->flags &= ~PF_IDLE; if (WARN(!irqs_disabled(), "Interrupts were enabled *very* early, fixing it\n")) > ------------------------------------------------------------------------ > > diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c > index fec804b79080..f00fb0855e4b 100644 > --- a/kernel/rcu/tiny.c > +++ b/kernel/rcu/tiny.c > @@ -192,7 +192,7 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func) > rcu_ctrlblk.curtail = &head->next; > local_irq_restore(flags); > > - if (unlikely(is_idle_task(current))) { > + if (unlikely(is_idle_task(current)) && system_state > SYSTEM_BOOTING) { > /* force scheduling for rcu_qs() */ > resched_cpu(0); > } ^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 15:44 ` Liam R. Howlett @ 2023-09-12 16:49 ` Paul E. McKenney 2023-09-12 17:02 ` Christophe Leroy 2023-09-12 17:09 ` Christophe Leroy 1 sibling, 1 reply; 43+ messages in thread From: Paul E. McKenney @ 2023-09-12 16:49 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Tue, Sep 12, 2023 at 11:44:23AM -0400, Liam R. Howlett wrote: > * Paul E. McKenney <paulmck@kernel.org> [230912 11:07]: > > On Tue, Sep 12, 2023 at 09:56:17AM -0400, Liam R. Howlett wrote: > > > * Paul E. McKenney <paulmck@kernel.org> [230912 06:00]: > > > > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > > > > Hi Paul, > > > > > > > > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > > > > > > > TL;DR: > > > > > > > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > > > > instead be as follows: > > > > > > > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > > > > fully operational scheduler. > > > > > > > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > > > > after interrupts have been enabled and the scheduler is fully > > > > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > > > > good idea. ;-) > > > > > > > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > > > > just before that mutex_lock() in __setup_irq(). > > > > > > I had already found that this is the mutex lock that is enabling them. > > > I surrounded the mutex lock to ensure it was not enabled before, but was > > > after. Here is the findings: > > > > > > kernel/irq/manage.c:1587 __setup_irq: > > > [ 0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable) > > > [ 0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4 > > > [ 0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8 > > > [ 0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c > > > [ 0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4 > > > > > > Note your line number will be slightly different due to my debug. This > > > is the WARN _after_ the mutex lock. > > > > > > > > > > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > > > > been enabled is a bad idea. ;-) > > > > > > > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > > > > > > > Thank you, looking forward to hearing the outcome! > > > > > > > > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > > > > cfeb6ae8bcb96ccf^. > > > > > > > > > > > > I look forward to hearing what is the issue in both cases. > > > > > > > > > > For RZ/A, my problem report is > > > > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > > > > > > > Thank you, Geert! > > > > > > > > Huh. Is that patch you reverted causing Maple Tree or related code > > > > to attempt to acquire mutexes in early boot before interrupts have > > > > been enabled? > > > > > > > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > > > > would be to put it at the beginning of mutex_lock(). Or for that matter > > > > at the beginning of might_sleep(). > > > > > > Yeah, I put many WARN() calls through the code as well as tracking down > > > where TIF_NEED_RESCHED was set; the tiny.c call_rcu(). > > > > > > > > > So my findings summarized: > > > > > > 1. My change to the maple tree makes call_rcu() more likely on early boot. > > > 2. The initial thread setup is always set to idle state > > > 3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current) > > > 4. init_IRQ() takes a mutex lock which will enable the interrupts since > > > TIF_NEED_RESCHED is set. > > > > > > I don't know which of these things is "wrong". > > > > Doing early-boot call_rcu() is OK. > > > > The initial thread eventually becomes the idle thread for the boot CPU. > > See rest_init() in init/main.c. > > > > I can certainly make Tiny call_rcu() refrain from invoking resched_cpu() > > during boot, as shown in the (untested) patch below. This might result in > > boot-time hangs, though. > > If we set the current thread as !idle, then we don't need to add > overhead to every call_rcu(), and you've already tracked down where I > need to change the flags back to idle. Patch below. I personally like your patch way better than mine, but it will need both eyes and time on it. I wouldn't put it past someone to assume that the boot CPU is running the idle thread early in boot. :-/ > > The thought of doing mutex_lock() before interrupts are enabled on the > > boot CPU strikes me as very wrong. Others might argue that the fact > > that __might_resched() explicitly avoids complaining when system_state > > is equal to SYSTEM_BOOTING constitutes evidence that such calls are OK. > > (Which might be why enabling debug suppressed the problem.) Except that > > if you actually try sleeping at that time, nothing good can possibly > > happen. > > Does lockdep check for SYSTEM_BOOTING as well? That could be another > reason? Not from what I can see, but I could be missing something. > > So my question is why is it useful to setup interrupts that early, given > > that interrupts cannot possibly happen until the boot CPU enables them? > > I don't know for sure, but there are 'preallocated IRQs' which end up > grouped 0-15, then I see another one added at 55 after the mpic console > output. I suspect it's so that they can be added as they are discovered > during early boot? Christophe argues that the interrupt stacks must be allocated early on, and that this acquires a mutex. > The below is not fully tested, but qemu stops throwing the warning on > boot and it doesn't add instructions to call_rcu(). Two points in its favor! ;-) Thanx, Paul > ------------------------------------------------------------------------ > diff --git a/init/main.c b/init/main.c > index dbe1fe76be34..fd4739918a94 100644 > --- a/init/main.c > +++ b/init/main.c > @@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void) > */ > rcu_read_lock(); > tsk = find_task_by_pid_ns(pid, &init_pid_ns); > - tsk->flags |= PF_NO_SETAFFINITY; > + tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE; > set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id())); > rcu_read_unlock(); > > @@ -943,6 +943,7 @@ void start_kernel(void) > * time - but meanwhile we still have a functioning scheduler. > */ > sched_init(); > + current->flags &= ~PF_IDLE; > > if (WARN(!irqs_disabled(), > "Interrupts were enabled *very* early, fixing it\n")) > > > ------------------------------------------------------------------------ > > > > diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c > > index fec804b79080..f00fb0855e4b 100644 > > --- a/kernel/rcu/tiny.c > > +++ b/kernel/rcu/tiny.c > > @@ -192,7 +192,7 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func) > > rcu_ctrlblk.curtail = &head->next; > > local_irq_restore(flags); > > > > - if (unlikely(is_idle_task(current))) { > > + if (unlikely(is_idle_task(current)) && system_state > SYSTEM_BOOTING) { > > /* force scheduling for rcu_qs() */ > > resched_cpu(0); > > } ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 16:49 ` Paul E. McKenney @ 2023-09-12 17:02 ` Christophe Leroy 2023-09-13 6:33 ` Christophe Leroy 0 siblings, 1 reply; 43+ messages in thread From: Christophe Leroy @ 2023-09-12 17:02 UTC (permalink / raw) To: paulmck@kernel.org, Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni Le 12/09/2023 à 18:49, Paul E. McKenney a écrit : > On Tue, Sep 12, 2023 at 11:44:23AM -0400, Liam R. Howlett wrote: >>> So my question is why is it useful to setup interrupts that early, given >>> that interrupts cannot possibly happen until the boot CPU enables them? >> >> I don't know for sure, but there are 'preallocated IRQs' which end up >> grouped 0-15, then I see another one added at 55 after the mpic console >> output. I suspect it's so that they can be added as they are discovered >> during early boot? > > Christophe argues that the interrupt stacks must be allocated early > on, and that this acquires a mutex. > Well, we can probably allocate them later than it is today. In commit 547db12fd8a0 ("powerpc/32: Use vmapped stacks for interrupts") I already pushed the allocation at a later stage than it initialy was. We can probably do it later if it helps, however it definitely needs to be done before enabling IRQs for obvious reasons, so it is a problem that alloc_vm_stack() calling __vmalloc_node() enables IRQs. Christophe ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 17:02 ` Christophe Leroy @ 2023-09-13 6:33 ` Christophe Leroy 0 siblings, 0 replies; 43+ messages in thread From: Christophe Leroy @ 2023-09-13 6:33 UTC (permalink / raw) To: paulmck@kernel.org, Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni, Linux ARM Le 12/09/2023 à 19:02, Christophe Leroy a écrit : > > > Le 12/09/2023 à 18:49, Paul E. McKenney a écrit : >> On Tue, Sep 12, 2023 at 11:44:23AM -0400, Liam R. Howlett wrote: >>>> So my question is why is it useful to setup interrupts that early, given >>>> that interrupts cannot possibly happen until the boot CPU enables them? >>> >>> I don't know for sure, but there are 'preallocated IRQs' which end up >>> grouped 0-15, then I see another one added at 55 after the mpic console >>> output. I suspect it's so that they can be added as they are discovered >>> during early boot? >> >> Christophe argues that the interrupt stacks must be allocated early >> on, and that this acquires a mutex. >> > > Well, we can probably allocate them later than it is today. > > In commit 547db12fd8a0 ("powerpc/32: Use vmapped stacks for interrupts") > I already pushed the allocation at a later stage than it initialy was. > > We can probably do it later if it helps, however it definitely needs to > be done before enabling IRQs for obvious reasons, so it is a problem > that alloc_vm_stack() calling __vmalloc_node() enables IRQs. For FWIW, looks like arm32 is doing similar so the problem is likely to happen for them too. For that both CONFIG_IRQSTACKS and CONFIG_VMAP_STACK must be set it seems. Christophe ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 15:44 ` Liam R. Howlett 2023-09-12 16:49 ` Paul E. McKenney @ 2023-09-12 17:09 ` Christophe Leroy 2023-09-12 17:38 ` Liam R. Howlett 1 sibling, 1 reply; 43+ messages in thread From: Christophe Leroy @ 2023-09-12 17:09 UTC (permalink / raw) To: Liam R. Howlett, Paul E. McKenney, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni Le 12/09/2023 à 17:44, Liam R. Howlett a écrit : > diff --git a/init/main.c b/init/main.c > index dbe1fe76be34..fd4739918a94 100644 > --- a/init/main.c > +++ b/init/main.c > @@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void) > */ > rcu_read_lock(); > tsk = find_task_by_pid_ns(pid, &init_pid_ns); > - tsk->flags |= PF_NO_SETAFFINITY; > + tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE; Is it really what you want to do ? PF_NO_SETAFFINITY is 0x04000000 and PF_IDLE is 0x00000002 so PF_NO_SETAFFINITY & PF_IDLE is 0 Didn't you mean to do PF_NO_SETAFFINITY | PF_IDLE ? Regardless, with either change I don't get the warning anymore. > set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id())); > rcu_read_unlock(); > > @@ -943,6 +943,7 @@ void start_kernel(void) > * time - but meanwhile we still have a functioning scheduler. > */ > sched_init(); > + current->flags &= ~PF_IDLE; > > if (WARN(!irqs_disabled(), > "Interrupts were enabled *very* early, fixing it\n")) > ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 17:09 ` Christophe Leroy @ 2023-09-12 17:38 ` Liam R. Howlett 0 siblings, 0 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 17:38 UTC (permalink / raw) To: Christophe Leroy Cc: Paul E. McKenney, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni * Christophe Leroy <christophe.leroy@csgroup.eu> [230912 13:09]: > > > Le 12/09/2023 à 17:44, Liam R. Howlett a écrit : > > diff --git a/init/main.c b/init/main.c > > index dbe1fe76be34..fd4739918a94 100644 > > --- a/init/main.c > > +++ b/init/main.c > > @@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void) > > */ > > rcu_read_lock(); > > tsk = find_task_by_pid_ns(pid, &init_pid_ns); > > - tsk->flags |= PF_NO_SETAFFINITY; > > + tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE; > > Is it really what you want to do ? > > PF_NO_SETAFFINITY is 0x04000000 and PF_IDLE is 0x00000002 so > > PF_NO_SETAFFINITY & PF_IDLE is 0 > > > Didn't you mean to do PF_NO_SETAFFINITY | PF_IDLE ? Yes, certainly. > > > Regardless, with either change I don't get the warning anymore. I don't have it fully tested but we avoid getting the call_rcu() setting the TIF_... flag by avoiding the task having PF_IDLE set in the flags. I'm not entirely sure if I have added the set/clear in the best locations either. The largest concern I have is that this could potentially change arch or platfrom code if anything depends on this being idle. > > > > > set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id())); > > rcu_read_unlock(); > > > > @@ -943,6 +943,7 @@ void start_kernel(void) > > * time - but meanwhile we still have a functioning scheduler. > > */ > > sched_init(); > > + current->flags &= ~PF_IDLE; > > > > if (WARN(!irqs_disabled(), > > "Interrupts were enabled *very* early, fixing it\n")) > > ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 10:00 ` Paul E. McKenney 2023-09-12 13:56 ` Liam R. Howlett @ 2023-09-13 13:14 ` Geert Uytterhoeven 2023-09-13 13:24 ` Liam R. Howlett 1 sibling, 1 reply; 43+ messages in thread From: Geert Uytterhoeven @ 2023-09-13 13:14 UTC (permalink / raw) To: paulmck Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni Hi Paul, On Tue, Sep 12, 2023 at 12:00 PM Paul E. McKenney <paulmck@kernel.org> wrote: > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > TL;DR: > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > instead be as follows: > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > fully operational scheduler. > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > after interrupts have been enabled and the scheduler is fully > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > good idea. ;-) > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > just before that mutex_lock() in __setup_irq(). > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > been enabled is a bad idea. ;-) > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > Thank you, looking forward to hearing the outcome! On a typical arm32 system with global or architectured timer, I get: WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xcc/0x6d0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.6.0-rc1-shmobile-02354-g24e058b77f5a #1655 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x40/0x4c dump_stack_lvl from __warn+0x78/0x10c __warn from warn_slowpath_fmt+0x90/0x11c warn_slowpath_fmt from __setup_irq+0xcc/0x6d0 __setup_irq from __request_percpu_irq+0xb8/0xd0 __request_percpu_irq from set_smp_ipi_range+0x88/0xdc set_smp_ipi_range from gic_of_init+0x1a4/0x4d8 gic_of_init from of_irq_init+0x1f0/0x320 of_irq_init from init_IRQ+0x74/0x104 init_IRQ from start_kernel+0x360/0x5d0 start_kernel from 0x0 Likewise on arm64 with architectured timer. But on these systems I do not see the issue I reported. On RISC-V: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0x4e6/0x5ee Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-02355-g63165363c6a3 #63 Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) epc : __setup_irq+0x4e6/0x5ee ra : __setup_irq+0x38/0x5ee epc : ffffffff80049472 ra : ffffffff80048fc4 sp : ffffffff81203cd0 gp : ffffffff812ee760 tp : ffffffff8120d5c0 t0 : ffffffd801854300 t1 : 0000000000000000 t2 : ffffffff81000ad8 s0 : ffffffff81203d20 s1 : ffffffd801855000 a0 : 0000000000000001 a1 : ffffffd801855000 a2 : ffffffd801854280 a3 : 0000000000000001 a4 : 0000000000000000 a5 : 0000000000000000 a6 : ffffffd801852108 a7 : ffffffd801852100 s2 : ffffffd801854280 s3 : 0000000000000005 s4 : ffffffff812c54c0 s5 : 0000000000000005 s6 : ffffffff80dd83a0 s7 : ffffffff805c0cc0 s8 : ffffffd801855018 s9 : 0000000000000000 s10: 0000000000000000 s11: 000000007bf638a0 t3 : 0000000000000000 t4 : 0000000000000002 t5 : ffffffff812882a0 t6 : 0000000000000001 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff80049472>] __setup_irq+0x4e6/0x5ee [<ffffffff800497a8>] __request_percpu_irq+0x98/0xcc [<ffffffff8082501e>] riscv_timer_init_dt+0x186/0x22e [<ffffffff80824b62>] timer_probe+0x62/0xd2 [<ffffffff80803c36>] time_init+0x86/0xa6 [<ffffffff80800ae2>] start_kernel+0x436/0x618 ---[ end trace 0000000000000000 ]--- Also, no issue here. On the affected systems (RZ/A1 and RZ/A2), the WARN_ON_ONCE() did not trigger, until I applied Liam's patch ("init/main: Clear boot task idle flag"), which got rid of the "Interrupts were enabled early" warning, and now tells me, as expected: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xc8/0x654 CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-rskrza1-02357-g237e09fd64b8-dirty #829 Hardware name: Generic R7S72100 (Flattened Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x24/0x3c dump_stack_lvl from __warn+0x74/0xb8 __warn from warn_slowpath_fmt+0x78/0xb0 warn_slowpath_fmt from __setup_irq+0xc8/0x654 __setup_irq from request_threaded_irq+0xac/0x13c request_threaded_irq from timer_of_init+0x238/0x2c8 timer_of_init from ostm_init+0x98/0x208 ostm_init from timer_probe+0x90/0xe4 timer_probe from start_kernel+0x2c0/0x488 start_kernel from 0x0 ---[ end trace 0000000000000000 ]--- However, Liam's patch causes lots of warnings on the other systems... > > > > Note that there are (possibly different) issues seen on ppc32 and on arm32 > > > > (Renesas RZ/A in particular, but not on other Renesas ARM systems). > > > > > > > > I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. > > > > Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and > > > > cfeb6ae8bcb96ccf^. > > > > > > I look forward to hearing what is the issue in both cases. > > > > For RZ/A, my problem report is > > https://lore.kernel.org/all/3f86d58e-7f36-c6b4-c43a-2a7bcffd3bd@linux-m68k.org/ > > Thank you, Geert! > > Huh. Is that patch you reverted causing Maple Tree or related code > to attempt to acquire mutexes in early boot before interrupts have > been enabled? > > If that added WARN_ON_ONCE() doesn't trigger early, another approach > would be to put it at the beginning of mutex_lock(). Or for that matter > at the beginning of might_sleep(). With the WARN_ON_ONCE() moved from __setup_irq() to mutex_lock(), it does trigger on RZ/A1: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Built 1 zonelists, mobility grouping off. Total pages: 8128 +------------[ cut here ]------------ +WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:283 mutex_lock+0x3c/0x68 +CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-rskrza1-02360-gd762084b1737-dirty #831 +Hardware name: Generic R7S72100 (Flattened Device Tree) + unwind_backtrace from show_stack+0x10/0x14 + show_stack from dump_stack_lvl+0x24/0x3c + dump_stack_lvl from __warn+0x74/0xb8 + __warn from warn_slowpath_fmt+0x78/0xb0 + warn_slowpath_fmt from mutex_lock+0x3c/0x68 + mutex_lock from __cpuhp_setup_state_cpuslocked+0x44/0x1c0 + __cpuhp_setup_state_cpuslocked from page_alloc_init_cpuhp+0x28/0x64 + page_alloc_init_cpuhp from mm_core_init+0x18/0x2a4 + mm_core_init from start_kernel+0x250/0x47c + start_kernel from 0x0 +---[ end trace 0000000000000000 ]--- mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 22876K/32768K available (5120K kernel code, 951K rwdata, 1208K rodata, 1024K init, 321K bss, 9892K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=1, Nodes=1 Thanks! Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-13 13:14 ` Geert Uytterhoeven @ 2023-09-13 13:24 ` Liam R. Howlett 2023-09-13 13:26 ` Geert Uytterhoeven 0 siblings, 1 reply; 43+ messages in thread From: Liam R. Howlett @ 2023-09-13 13:24 UTC (permalink / raw) To: Geert Uytterhoeven Cc: paulmck, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Geert Uytterhoeven <geert@linux-m68k.org> [230913 09:15]: > Hi Paul, > > On Tue, Sep 12, 2023 at 12:00 PM Paul E. McKenney <paulmck@kernel.org> wrote: > > On Tue, Sep 12, 2023 at 10:34:44AM +0200, Geert Uytterhoeven wrote: > > > On Tue, Sep 12, 2023 at 10:30 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > On Tue, Sep 12, 2023 at 10:23:37AM +0200, Geert Uytterhoeven wrote: > > > > > On Tue, Sep 12, 2023 at 10:14 AM Paul E. McKenney <paulmck@kernel.org> wrote: > > > > > > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: > > > > > > > > On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: > > > > > > > > > * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: > > > > > > > > > > On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: > > > > > > > > > > > (Adding Paul & Shanker to Cc list.. please see below for why) > > > > > > > > > > > > > > > > > > > > > > Apologies on the late response, I was away and have been struggling to > > > > > > > > > > > get a working PPC32 test environment. > > > > > > > > > > > > > > > > > > > > > > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > > > > > > > > > > > Hi Liam, > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > > > > > > > > > > > The current implementation of append may cause duplicate data and/or > > > > > > > > > > > > > incorrect ranges to be returned to a reader during an update. Although > > > > > > > > > > > > > this has not been reported or seen, disable the append write operation > > > > > > > > > > > > > while the tree is in rcu mode out of an abundance of caution. > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > > > > > > > > > ... > > > > > > > > > > > > > > > > > > > RCU-related configs: > > > > > > > > > > > > > > > > > > > > > > > > $ grep RCU .config > > > > > > > > > > > > # RCU Subsystem > > > > > > > > > > > > CONFIG_TINY_RCU=y > > > > > > > > > > > > I must have been asleep last time I looked at this. I was looking at > > > > > > Tree RCU. Please accept my apologies for my lapse. :-/ > > > > > > > > > > > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > > > > > > have said the same thing, albeit after looking at a lot less RCU code. > > > > > > > > > > > > TL;DR: > > > > > > > > > > > > 1. Try making the __setup_irq() function's call to mutex_lock() > > > > > > instead be as follows: > > > > > > > > > > > > if (!mutex_trylock(&desc->request_mutex)) > > > > > > mutex_lock(&desc->request_mutex); > > > > > > > > > > > > This might fail if __setup_irq() has other dependencies on a > > > > > > fully operational scheduler. > > > > > > > > > > > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > > > > > > after interrupts have been enabled and the scheduler is fully > > > > > > operational. Invoking mutex_lock() before that time is not a > > > > > > good idea. ;-) > > > > > > > > > > There is no call to __setup_irq() from arch/powerpc/? > > > > > > > > Glad it is not just me, given that I didn't see a direct call, either. So > > > > later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) > > > > just before that mutex_lock() in __setup_irq(). > > > > > > > > Either way, invoking mutex_lock() early in boot before interrupts have > > > > been enabled is a bad idea. ;-) > > > > > > I'll add that WARN_ON_ONCE() too, and will report back later today... > > > > Thank you, looking forward to hearing the outcome! > > On a typical arm32 system with global or architectured timer, I get: > > WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xcc/0x6d0 > CPU: 0 PID: 0 Comm: swapper/0 Not tainted > 6.6.0-rc1-shmobile-02354-g24e058b77f5a #1655 > Hardware name: Generic R-Car Gen2 (Flattened Device Tree) > unwind_backtrace from show_stack+0x10/0x14 > show_stack from dump_stack_lvl+0x40/0x4c > dump_stack_lvl from __warn+0x78/0x10c > __warn from warn_slowpath_fmt+0x90/0x11c > warn_slowpath_fmt from __setup_irq+0xcc/0x6d0 > __setup_irq from __request_percpu_irq+0xb8/0xd0 > __request_percpu_irq from set_smp_ipi_range+0x88/0xdc > set_smp_ipi_range from gic_of_init+0x1a4/0x4d8 > gic_of_init from of_irq_init+0x1f0/0x320 > of_irq_init from init_IRQ+0x74/0x104 > init_IRQ from start_kernel+0x360/0x5d0 > start_kernel from 0x0 > > Likewise on arm64 with architectured timer. > But on these systems I do not see the issue I reported. > > On RISC-V: > > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0x4e6/0x5ee > Modules linked in: > CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-02355-g63165363c6a3 #63 > Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) > epc : __setup_irq+0x4e6/0x5ee > ra : __setup_irq+0x38/0x5ee > epc : ffffffff80049472 ra : ffffffff80048fc4 sp : ffffffff81203cd0 > gp : ffffffff812ee760 tp : ffffffff8120d5c0 t0 : ffffffd801854300 > t1 : 0000000000000000 t2 : ffffffff81000ad8 s0 : ffffffff81203d20 > s1 : ffffffd801855000 a0 : 0000000000000001 a1 : ffffffd801855000 > a2 : ffffffd801854280 a3 : 0000000000000001 a4 : 0000000000000000 > a5 : 0000000000000000 a6 : ffffffd801852108 a7 : ffffffd801852100 > s2 : ffffffd801854280 s3 : 0000000000000005 s4 : ffffffff812c54c0 > s5 : 0000000000000005 s6 : ffffffff80dd83a0 s7 : ffffffff805c0cc0 > s8 : ffffffd801855018 s9 : 0000000000000000 s10: 0000000000000000 > s11: 000000007bf638a0 t3 : 0000000000000000 t4 : 0000000000000002 > t5 : ffffffff812882a0 t6 : 0000000000000001 > status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 > [<ffffffff80049472>] __setup_irq+0x4e6/0x5ee > [<ffffffff800497a8>] __request_percpu_irq+0x98/0xcc > [<ffffffff8082501e>] riscv_timer_init_dt+0x186/0x22e > [<ffffffff80824b62>] timer_probe+0x62/0xd2 > [<ffffffff80803c36>] time_init+0x86/0xa6 > [<ffffffff80800ae2>] start_kernel+0x436/0x618 > ---[ end trace 0000000000000000 ]--- > > Also, no issue here. > > On the affected systems (RZ/A1 and RZ/A2), the WARN_ON_ONCE() did > not trigger, until I applied Liam's patch ("init/main: Clear boot task > idle flag"), which got rid of the "Interrupts were enabled early" warning, > and now tells me, as expected: > > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xc8/0x654 > CPU: 0 PID: 0 Comm: swapper Not tainted > 6.6.0-rc1-rskrza1-02357-g237e09fd64b8-dirty #829 > Hardware name: Generic R7S72100 (Flattened Device Tree) > unwind_backtrace from show_stack+0x10/0x14 > show_stack from dump_stack_lvl+0x24/0x3c > dump_stack_lvl from __warn+0x74/0xb8 > __warn from warn_slowpath_fmt+0x78/0xb0 > warn_slowpath_fmt from __setup_irq+0xc8/0x654 > __setup_irq from request_threaded_irq+0xac/0x13c > request_threaded_irq from timer_of_init+0x238/0x2c8 > timer_of_init from ostm_init+0x98/0x208 > ostm_init from timer_probe+0x90/0xe4 > timer_probe from start_kernel+0x2c0/0x488 > start_kernel from 0x0 > ---[ end trace 0000000000000000 ]--- > > However, Liam's patch causes lots of warnings on the other systems... > What patch? The "init/main" patch? What systems and what are they? Thanks, Liam ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-13 13:24 ` Liam R. Howlett @ 2023-09-13 13:26 ` Geert Uytterhoeven 0 siblings, 0 replies; 43+ messages in thread From: Geert Uytterhoeven @ 2023-09-13 13:26 UTC (permalink / raw) To: Liam R. Howlett, Geert Uytterhoeven, paulmck, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni Hi Liam, On Wed, Sep 13, 2023 at 3:24 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote: > * Geert Uytterhoeven <geert@linux-m68k.org> [230913 09:15]: > > On the affected systems (RZ/A1 and RZ/A2), the WARN_ON_ONCE() did > > not trigger, until I applied Liam's patch ("init/main: Clear boot task > > idle flag"), which got rid of the "Interrupts were enabled early" warning, > > and now tells me, as expected: [...] > > However, Liam's patch causes lots of warnings on the other systems... > > > > What patch? The "init/main" patch? Indeed. > What systems and what are they? Reported in the thread: https://lore.kernel.org/all/CAMuHMdWR68a49=vthdp03stpvaHLS5BRa+rhVdnr7gQDFkNotQ@mail.gmail.com Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 8:14 ` Paul E. McKenney 2023-09-12 8:23 ` Geert Uytterhoeven @ 2023-09-12 14:37 ` Christophe Leroy 2023-09-12 15:06 ` Christophe Leroy 1 sibling, 1 reply; 43+ messages in thread From: Christophe Leroy @ 2023-09-12 14:37 UTC (permalink / raw) To: paulmck@kernel.org, Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni Le 12/09/2023 à 10:14, Paul E. McKenney a écrit : > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: >> * Paul E. McKenney <paulmck@kernel.org> [230906 14:03]: >>> On Wed, Sep 06, 2023 at 01:29:54PM -0400, Liam R. Howlett wrote: >>>> * Paul E. McKenney <paulmck@kernel.org> [230906 13:24]: >>>>> On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote: >>>>>> (Adding Paul & Shanker to Cc list.. please see below for why) >>>>>> >>>>>> Apologies on the late response, I was away and have been struggling to >>>>>> get a working PPC32 test environment. >>>>>> >>>>>> * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: >>>>>>> Hi Liam, >>>>>>> >>>>>>> On Fri, 18 Aug 2023, Liam R. Howlett wrote: >>>>>>>> The current implementation of append may cause duplicate data and/or >>>>>>>> incorrect ranges to be returned to a reader during an update. Although >>>>>>>> this has not been reported or seen, disable the append write operation >>>>>>>> while the tree is in rcu mode out of an abundance of caution. >>>>>> >>>>>> ... >>>>>>>> >> >> ... >> >>>>>>> RCU-related configs: >>>>>>> >>>>>>> $ grep RCU .config >>>>>>> # RCU Subsystem >>>>>>> CONFIG_TINY_RCU=y > > I must have been asleep last time I looked at this. I was looking at > Tree RCU. Please accept my apologies for my lapse. :-/ > > However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would > have said the same thing, albeit after looking at a lot less RCU code. > > TL;DR: > > 1. Try making the __setup_irq() function's call to mutex_lock() > instead be as follows: > > if (!mutex_trylock(&desc->request_mutex)) > mutex_lock(&desc->request_mutex); > > This might fail if __setup_irq() has other dependencies on a > fully operational scheduler. > > 2. Move that ppc32 call to __setup_irq() much later, most definitely > after interrupts have been enabled and the scheduler is fully > operational. Invoking mutex_lock() before that time is not a > good idea. ;-) > > For more detail, please read on! > >>>>>>> # CONFIG_RCU_EXPERT is not set >>>>>>> CONFIG_TINY_SRCU=y >>>>>>> # end of RCU Subsystem >>>>>>> # RCU Debugging >>>>>>> # CONFIG_RCU_SCALE_TEST is not set >>>>>>> # CONFIG_RCU_TORTURE_TEST is not set >>>>>>> # CONFIG_RCU_REF_SCALE_TEST is not set >>>>>>> # CONFIG_RCU_TRACE is not set >>>>>>> # CONFIG_RCU_EQS_DEBUG is not set >>>>>>> # end of RCU Debugging >>>>>> >>>>>> I used the configuration from debian 8 and ran 'make oldconfig' to build >>>>>> my kernel. I have attached the configuration. >> >> ... >> >>>>>> It appears to be something to do with struct maple_tree sparse_irqs. If >>>>>> you drop the rcu flag from that maple tree, then my configuration boots >>>>>> without the warning. >>>>>> >>>>>> I *think* this is because we will reuse a lot more nodes. And I *think* >>>>>> the rcu flag is not needed, since there is a comment about reading the >>>>>> tree being protected by the mutex sparse_irq_lock within the >>>>>> kernel/irq/irqdesc.c file. Shanker, can you comment on that? >>>>>> >>>>>> I wonder if there is a limit to the number of RCU free events before >>>>>> something is triggered to flush them out which could trigger IRQ >>>>>> enabling? Paul, could this be the case? >>>>> >>>>> Are you asking if call_rcu() will re-enable interrupts in the following >>>>> use case? >>>>> >>>>> local_irq_disable(); >>>>> call_rcu(&p->rh, my_cb_func); >>>>> local_irq_enable(); >> >> I am not. >> >> ... >> >>>>> >>>>> Or am I missing your point? >>>> >>>> This is very early in the boot sequence when interrupts have not been >>>> enabled. What we are seeing is a WARN_ON() that is triggered by >>>> interrupts being enabled before they should be enabled. >>>> >>>> I was wondering if, for example, I called call_rcu() a lot *before* >>>> interrupts were enabled, that something could trigger that would either >>>> enable interrupts or indicate the task needs rescheduling? >>> >>> You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU >>> callback invocations won't happen until some time after the scheduler >>> starts up. >> >> I am not, it's just a detection of IRQs being enabled early. >> >>> >>>> Specifically the rescheduling part is suspect. I tracked down the call >>>> to a mutex_lock() which calls cond_resched(), so could rcu be >>>> 'encouraging' the rcu window by a reschedule request? >>> >>> During boot before interrupts are enabled, RCU has not yet spawned any of >>> its kthreads. Therefore, all of its attempts to do wakeups would notice >>> a NULL task_struct pointer and refrain from actually doing the wakeup. >>> If it did do the wakeup, you would see a NULL-pointer exception. See >>> for example, invoke_rcu_core_kthread(), though that won't happen unless >>> you booted with rcutree.use_softirq=0. >>> >>> Besides, since when did doing a wakeup enable interrupts? That would >>> make it hard to do wakeups from hardware interrupt handlers, not? >> >> Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a >> cond_resched(). >> >> >From what Michael said [1] in this thread, since something has already >> set TIF_NEED_RESCHED, it will eventually enable interrupts on us. >> >> I've traced this to running call_rcu() in kernel/rcu/tiny.c and >> is_idle_task(current) is true, which means rcu runs: >> /* force scheduling for rcu_qs() */ >> resched_cpu(0); >> >> the task is set idle in sched_init() -> init_idle() and never changed, >> afaict. > > Yes, because RCU eventually needs a context switch in order to make > a grace period happen. And Maple Tree isn't the only thing invoking > call_rcu() early, so this has been in place for a very long time. > >> Removing the RCU option from the maple tree in kernel/irq/irqdesc.c >> fixes the issue by avoiding the maple tree running call_rcu(). I am not >> sure on the locking of the tree so I feel this change may cause other >> issues...also it's before lockdep_init(), so any issue I introduce may >> not be detected. >> >> When CONFIG_DEBUG_ATOMIC_SLEEP is configured, it seems that rcu does the >> same thing, but the IRQs are not enabled on return. So, resched_cpu(0) >> is called, but the IRQs warning of enabled isn't triggered. I failed to >> find a reason why. > > Here you mean IRQs being enabled upon return from __setup_irq(), correct? > > But yes, __setup_irq() does call mutex_lock(). Which will call > preempt_schedule_common() via might_sleep() and __cond_resched(), even > though that is clearly a very bad thing this early. And let's face it, > the whole purpose of mutex_lock() is to block when needed. And a big > purpose of that might_sleep() is to yell at people invoking this with > interrupts disabled. > > And most of the wrappers around __setup_irq() look to be intended > for much later, after interrupts have been enabled. One exception is > setup_percpu_irq(), which says that it is for "the early boot process", > whenever that might be. But this is only invoked from mips in v6.5. > > The __request_percpu_irq() function is wrappered by request_percpu_irq(), > and its header comment suggests that it is to be called after there are > multiple CPUs. I am not seeing a call that is obviously from ppc32, > but there are a number of drivers using this with which I am unfamiliar. > > The request_percpu_nmi() has to be followed up on each CPU using > prepare_percpu_nmi() and enable_percpu_nmi(), so it is not clear that > it is useful to invoke this before interrupts are enabled. But this is > used by ARM, not ppc32 from what I can see. > > So even though I am not seeing how ppc32 invokes __setup_irq() early, > your testing clearly indicates that it is doing so. > >> I am not entirely sure what makes ppc32 different than other platforms >> in that the initial task is configured to an idle task and the first >> call to call_rcu (tiny!) would cause the observed behaviour. > > Maybe something like this in __setup_irq(), right before the > mutex_lock()? > > WARN_ON_ONCE(irqs_disabled()); > > This will dump the stack trace showing how __setup_irq() is being invoked > in early boot on ppc32. > > Again, given that __setup_irq() invokes mutex_lock(), invoking this > function in its current form before interrupts have been enabled is a > bad idea. > No trigger of that WARN_ON() I added in __setup_irq() as instructed above, still getting (pmac32_defconfig on MAC99 QEMU) ------------[ cut here ]------------ Interrupts were enabled early WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x4d8/0x5c0 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-dirty #481 Hardware name: PowerMac3,1 7400 0xc0209 PowerMac NIP: c0a6052c LR: c0a6052c CTR: 00000000 REGS: c0c4dee0 TRAP: 0700 Not tainted (6.6.0-rc1-dirty) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24000282 XER: 20000000 GPR00: c0a6052c c0c4dfa0 c0b92580 0000001d c0b9d128 00000001 c0b9d148 3ffffdff GPR08: c0ba80f0 00000000 00000000 3ffffe00 44000282 00000000 00000000 0199abfc GPR16: 0199b0a4 7fde7fa4 7fc5ac0c 000000bb 41000000 01c690c8 c0b92014 c09b4bdc GPR24: c0c55220 c0ac0000 00000000 efff9109 efff9100 0000000a c0c6d000 c0b920a0 NIP [c0a6052c] start_kernel+0x4d8/0x5c0 LR [c0a6052c] start_kernel+0x4d8/0x5c0 Call Trace: [c0c4dfa0] [c0a6052c] start_kernel+0x4d8/0x5c0 (unreliable) [c0c4dff0] [00003540] 0x3540 Code: 480037b1 48023c05 4bab88ed 90620260 480139e9 4b657ced 7d2000a6 71298000 41a20014 3c60c09a 3863b78c 4b5e9ccd <0fe00000> 39200000 99380008 7d2000a6 ---[ end trace 0000000000000000 ]--- ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 14:37 ` Christophe Leroy @ 2023-09-12 15:06 ` Christophe Leroy 0 siblings, 0 replies; 43+ messages in thread From: Christophe Leroy @ 2023-09-12 15:06 UTC (permalink / raw) To: paulmck@kernel.org, Liam R. Howlett, Geert Uytterhoeven, Andrew Morton, maple-tree@lists.infradead.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Shanker Donthineni Le 12/09/2023 à 16:37, Christophe Leroy a écrit : > > >> >> Maybe something like this in __setup_irq(), right before the >> mutex_lock()? >> >> WARN_ON_ONCE(irqs_disabled()); >> >> This will dump the stack trace showing how __setup_irq() is being invoked >> in early boot on ppc32. >> >> Again, given that __setup_irq() invokes mutex_lock(), invoking this >> function in its current form before interrupts have been enabled is a >> bad idea. >> > > No trigger of that WARN_ON() I added in __setup_irq() as instructed > above, still getting (pmac32_defconfig on MAC99 QEMU) > > ------------[ cut here ]------------ > Interrupts were enabled early > WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x4d8/0x5c0 > Modules linked in: > CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-dirty #481 > Hardware name: PowerMac3,1 7400 0xc0209 PowerMac > NIP: c0a6052c LR: c0a6052c CTR: 00000000 > REGS: c0c4dee0 TRAP: 0700 Not tainted (6.6.0-rc1-dirty) > MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24000282 XER: 20000000 > > GPR00: c0a6052c c0c4dfa0 c0b92580 0000001d c0b9d128 00000001 c0b9d148 > 3ffffdff > GPR08: c0ba80f0 00000000 00000000 3ffffe00 44000282 00000000 00000000 > 0199abfc > GPR16: 0199b0a4 7fde7fa4 7fc5ac0c 000000bb 41000000 01c690c8 c0b92014 > c09b4bdc > GPR24: c0c55220 c0ac0000 00000000 efff9109 efff9100 0000000a c0c6d000 > c0b920a0 > NIP [c0a6052c] start_kernel+0x4d8/0x5c0 > LR [c0a6052c] start_kernel+0x4d8/0x5c0 > Call Trace: > [c0c4dfa0] [c0a6052c] start_kernel+0x4d8/0x5c0 (unreliable) > [c0c4dff0] [00003540] 0x3540 > Code: 480037b1 48023c05 4bab88ed 90620260 480139e9 4b657ced 7d2000a6 > 71298000 41a20014 3c60c09a 3863b78c 4b5e9ccd <0fe00000> 39200000 > 99380008 7d2000a6 > ---[ end trace 0000000000000000 ]--- > For what it's worth, the interrupts seems to be enabled by the call to init_IRQ(). Diging into it that's enabled by the call to __vmalloc_node() in alloc_vm_stack() static void *__init alloc_vm_stack(void) { return __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, THREADINFO_GFP, NUMA_NO_NODE, (void *)_RET_IP_); } static void __init vmap_irqstack_init(void) { int i; for_each_possible_cpu(i) { softirq_ctx[i] = alloc_vm_stack(); hardirq_ctx[i] = alloc_vm_stack(); } } void __init init_IRQ(void) { if (IS_ENABLED(CONFIG_VMAP_STACK)) vmap_irqstack_init(); if (ppc_md.init_IRQ) ppc_md.init_IRQ(); if (!WARN_ON(!ppc_md.get_irq)) static_call_update(ppc_get_irq, ppc_md.get_irq); } Christophe ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-11 23:54 ` Liam R. Howlett 2023-09-12 8:14 ` Paul E. McKenney @ 2023-09-12 14:10 ` Matthew Wilcox 2023-09-12 14:17 ` Liam R. Howlett 1 sibling, 1 reply; 43+ messages in thread From: Matthew Wilcox @ 2023-09-12 14:10 UTC (permalink / raw) To: Liam R. Howlett, Paul E. McKenney, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a > cond_resched(). > > >From what Michael said [1] in this thread, since something has already > set TIF_NEED_RESCHED, it will eventually enable interrupts on us. > > I've traced this to running call_rcu() in kernel/rcu/tiny.c and > is_idle_task(current) is true, which means rcu runs: > /* force scheduling for rcu_qs() */ > resched_cpu(0); > > the task is set idle in sched_init() -> init_idle() and never changed, > afaict. Should calling init_idle() be deferred until after interrupts are all set up? ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 14:10 ` Matthew Wilcox @ 2023-09-12 14:17 ` Liam R. Howlett 0 siblings, 0 replies; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 14:17 UTC (permalink / raw) To: Matthew Wilcox Cc: Paul E. McKenney, Geert Uytterhoeven, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni * Matthew Wilcox <willy@infradead.org> [230912 10:10]: > On Mon, Sep 11, 2023 at 07:54:52PM -0400, Liam R. Howlett wrote: > > Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a > > cond_resched(). > > > > >From what Michael said [1] in this thread, since something has already > > set TIF_NEED_RESCHED, it will eventually enable interrupts on us. > > > > I've traced this to running call_rcu() in kernel/rcu/tiny.c and > > is_idle_task(current) is true, which means rcu runs: > > /* force scheduling for rcu_qs() */ > > resched_cpu(0); > > > > the task is set idle in sched_init() -> init_idle() and never changed, > > afaict. > > Should calling init_idle() be deferred until after interrupts are > all set up? At this point it is not platform specific code so I don't know what kind of fallout I'll produce with a change like that, but I was wondering if the thread running the boot process is really 'idle'? ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-06 15:23 ` Liam R. Howlett 2023-09-06 17:23 ` Paul E. McKenney @ 2023-09-06 19:06 ` Geert Uytterhoeven 1 sibling, 0 replies; 43+ messages in thread From: Geert Uytterhoeven @ 2023-09-06 19:06 UTC (permalink / raw) To: Liam R. Howlett Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc, Shanker Donthineni, Paul E. McKenney Hi Liam, On Wed, Sep 6, 2023 at 5:24 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote: > * Geert Uytterhoeven <geert@linux-m68k.org> [230829 12:42]: > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: > > > The current implementation of append may cause duplicate data and/or > > > incorrect ranges to be returned to a reader during an update. Although > > > this has not been reported or seen, disable the append write operation > > > while the tree is in rcu mode out of an abundance of caution. > > ... > > > > > > Fixes: 54a611b60590 ("Maple Tree: add new data structure") > > > Cc: stable@vger.kernel.org > > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> > > > > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > > ("maple_tree: disable mas_wr_append() when other readers are > > possible") in v6.5, and is being backported to stable. > > > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > > following warning: > > > > clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns > > sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns > > /soc/timer@e803b000: used for clocksource > > /soc/timer@e803c000: used for clock events > > +------------[ cut here ]------------ > > +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480 > > +Interrupts were enabled early > > Note that the maple tree is involved in tracking the interrupts, see > kernel/irq/irqdesc.c irq_insert_desc(), etc. > > > +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 > > I cannot find commit id 99b80d6b92b5. That's my local tree, based on renesas-drivers-2023-08-29-v6.5. > > > +Hardware name: Generic R7S9210 (Flattened Device Tree) > > + unwind_backtrace from show_stack+0x10/0x14 > > + show_stack from dump_stack_lvl+0x24/0x3c > > + dump_stack_lvl from __warn+0x74/0xb8 > > + __warn from warn_slowpath_fmt+0x78/0xb0 > > + warn_slowpath_fmt from start_kernel+0x2f0/0x480 > > + start_kernel from 0x0 > > +---[ end trace 0000000000000000 ]--- > > Console: colour dummy device 80x30 > > printk: console [tty0] enabled > > Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000) > > > > Reverting this commit fixes the issue. > > I have set up testing with qemu for powerpc 32b, and reverting this > patch does not fix it for me. Did you revert the patch or bisect to the > issue? I did bisect the issue (on RZ/A) to cfeb6ae8bcb96ccf. Reverting that commit on top of my local tree fixed the issue. > It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to > get the commit immediately before cfeb6ae8bcb96ccf). That is not the case on Renesas RZ/A (which is arm32). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-29 16:42 ` Geert Uytterhoeven 2023-08-31 5:39 ` Michael Ellerman 2023-09-06 15:23 ` Liam R. Howlett @ 2023-09-11 12:27 ` Linux regression tracking #adding (Thorsten Leemhuis) 2 siblings, 0 replies; 43+ messages in thread From: Linux regression tracking #adding (Thorsten Leemhuis) @ 2023-09-11 12:27 UTC (permalink / raw) To: Geert Uytterhoeven, Liam R. Howlett Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linux-renesas-soc [TLDR: I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form. See link in footer if these mails annoy you.] On 29.08.23 18:42, Geert Uytterhoeven wrote: > > On Fri, 18 Aug 2023, Liam R. Howlett wrote: >> The current implementation of append may cause duplicate data and/or >> incorrect ranges to be returned to a reader during an update. Although >> this has not been reported or seen, disable the append write operation >> while the tree is in rcu mode out of an abundance of caution. >> >> During the analysis of the mas_next_slot() the following was >> artificially created by separating the writer and reader code: > [...] > Thanks for your patch, which is now commit cfeb6ae8bcb96ccf > ("maple_tree: disable mas_wr_append() when other readers are > possible") in v6.5, and is being backported to stable. > > On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the > following warning: > > […] > Reverting this commit fixes the issue. Thanks for the report. To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot: #regzbot ^introduced cfeb6ae8bcb96ccf #regzbot title maple_tree: warning on Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9 #regzbot ignore-activity This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail. Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (the parent of this mail). See page linked in footer for details. Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) -- Everything you wanna know about Linux kernel regression tracking: https://linux-regtracking.leemhuis.info/about/#tldr That page also explains what to do if mails like this annoy you. ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-19 0:43 ` [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible Liam R. Howlett 2023-08-29 16:42 ` Geert Uytterhoeven @ 2023-08-30 19:49 ` Andreas Schwab 2023-08-31 5:37 ` Michael Ellerman 2023-09-12 18:15 ` Andreas Schwab 1 sibling, 2 replies; 43+ messages in thread From: Andreas Schwab @ 2023-08-30 19:49 UTC (permalink / raw) To: Liam R. Howlett Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linuxppc-dev This breaks booting on ppc32: Kernel attemptd to writ user page (1ff0) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on write at 0x00001ff0 Faulting instruction address: 0xc0009554 Vector: 300 (Data Access) at [c0b09d10] pc: c0009554: do_softirq_own_stack+0x18/0x30 lr: c004f480: __irq_exit_rcu+0x70/0xc0 sp: c0b09dd0 msr: 1032 dar: 1ff0 dsisr: 42000000 current = 0xc0a08360 pid = 0, comm = swapper Linux version 6.5.0 ... enter ? for help [c0b09de0] c00ff480 __irq_exit_rcu+0x70/0xc0 [c0b09df0] c0005a98 Decrementer_virt+0x108/0x10c --- Exception: 900 (Decrementer) at c06cfa0c __schedule+0x4fc/0x510 [c0b09ec0] c06cf75c __schedule+0x1cc/0x510 (unreliable) [c0b09ef0] c06cfc90 __cond_resched+0x2c/0x54 [c0b09f00] c06d07f8 mutex_lock_killable+0x18/0x5c [c0b09f10] c013c404 pcpu_alloc+0x110/0x4dc [c0b09f70] c000cc34 alloc_descr.isra.18+0x48/0x144 [c0b09f90] c0988aa0 early_irq_init+0x64/0x8c [c0b09fa0] c097a5a4 start_kernel+0x5b4/0x7b0 [c0b09ff0] 00003dc0 mon> -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different." ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-30 19:49 ` Andreas Schwab @ 2023-08-31 5:37 ` Michael Ellerman 2023-08-31 19:01 ` Andreas Schwab 2023-09-12 18:15 ` Andreas Schwab 1 sibling, 1 reply; 43+ messages in thread From: Michael Ellerman @ 2023-08-31 5:37 UTC (permalink / raw) To: Andreas Schwab, Liam R. Howlett Cc: Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linuxppc-dev Andreas Schwab <schwab@linux-m68k.org> writes: > This breaks booting on ppc32: Does enabling CONFIG_DEBUG_ATOMIC_SLEEP fix the crash? It did for me on qemu. cheers > Kernel attemptd to writ user page (1ff0) - exploit attempt? (uid: 0) > BUG: Unable to handle kernel data access on write at 0x00001ff0 > Faulting instruction address: 0xc0009554 > Vector: 300 (Data Access) at [c0b09d10] > pc: c0009554: do_softirq_own_stack+0x18/0x30 > lr: c004f480: __irq_exit_rcu+0x70/0xc0 > sp: c0b09dd0 > msr: 1032 > dar: 1ff0 > dsisr: 42000000 > current = 0xc0a08360 > pid = 0, comm = swapper > Linux version 6.5.0 ... > enter ? for help > [c0b09de0] c00ff480 __irq_exit_rcu+0x70/0xc0 > [c0b09df0] c0005a98 Decrementer_virt+0x108/0x10c > --- Exception: 900 (Decrementer) at c06cfa0c __schedule+0x4fc/0x510 > [c0b09ec0] c06cf75c __schedule+0x1cc/0x510 (unreliable) > [c0b09ef0] c06cfc90 __cond_resched+0x2c/0x54 > [c0b09f00] c06d07f8 mutex_lock_killable+0x18/0x5c > [c0b09f10] c013c404 pcpu_alloc+0x110/0x4dc > [c0b09f70] c000cc34 alloc_descr.isra.18+0x48/0x144 > [c0b09f90] c0988aa0 early_irq_init+0x64/0x8c > [c0b09fa0] c097a5a4 start_kernel+0x5b4/0x7b0 > [c0b09ff0] 00003dc0 > mon> > > -- > Andreas Schwab, schwab@linux-m68k.org > GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 > "And now for something completely different." ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-31 5:37 ` Michael Ellerman @ 2023-08-31 19:01 ` Andreas Schwab 0 siblings, 0 replies; 43+ messages in thread From: Andreas Schwab @ 2023-08-31 19:01 UTC (permalink / raw) To: Michael Ellerman Cc: Liam R. Howlett, Andrew Morton, maple-tree, linux-mm, linux-kernel, stable, linuxppc-dev On Aug 31 2023, Michael Ellerman wrote: > Andreas Schwab <schwab@linux-m68k.org> writes: >> This breaks booting on ppc32: > > Does enabling CONFIG_DEBUG_ATOMIC_SLEEP fix the crash? Yes, it does. -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different." ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-08-30 19:49 ` Andreas Schwab 2023-08-31 5:37 ` Michael Ellerman @ 2023-09-12 18:15 ` Andreas Schwab 2023-09-12 19:09 ` Liam R. Howlett 1 sibling, 1 reply; 43+ messages in thread From: Andreas Schwab @ 2023-09-12 18:15 UTC (permalink / raw) To: Liam R. Howlett Cc: linux-kernel, stable, maple-tree, linux-mm, Andrew Morton, linuxppc-dev, Michael Ellerman Any news? This is still broken. -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different." ^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 18:15 ` Andreas Schwab @ 2023-09-12 19:09 ` Liam R. Howlett 2023-09-12 20:01 ` Andreas Schwab 0 siblings, 1 reply; 43+ messages in thread From: Liam R. Howlett @ 2023-09-12 19:09 UTC (permalink / raw) To: Andreas Schwab Cc: linux-kernel, stable, maple-tree, linux-mm, Andrew Morton, linuxppc-dev, Michael Ellerman, Geert Uytterhoeven [-- Attachment #1: Type: text/plain, Size: 268 bytes --] * Andreas Schwab <schwab@linux-m68k.org> [230912 14:15]: > Any news? This is still broken. I have a proposed fix. I seem to have caused a pre-existing problem to show up. Please see if the attached works for you, and I'll send it to a lot of people. Thanks, Liam [-- Attachment #2: 0001-init-main-Clear-boot-task-idle-flag.patch --] [-- Type: text/x-diff, Size: 1607 bytes --] From 9ef8f834bb0342dc26464b9dd0165929d3e6a7e5 Mon Sep 17 00:00:00 2001 From: "Liam R. Howlett" <Liam.Howlett@oracle.com> Date: Tue, 12 Sep 2023 13:45:29 -0400 Subject: [PATCH] init/main: Clear boot task idle flag Initial booting was setting the task flag to idle (PF_IDLE) by the call path sched_init() -> init_idle(). Having the task idle and calling call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be enabled. Subsequent calls to any cond_resched() will enable IRQs, potentially earlier than the enabling of IRQs. This causes a warning later in start_kernel() as interrupts are enabled before the are fully set up. Fix this issue by clearing the PF_IDLE flag on return from sched_init() and restore the flag in rest_init(). Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> --- init/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/init/main.c b/init/main.c index ad920fac325c..46b35be8f00a 100644 --- a/init/main.c +++ b/init/main.c @@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void) */ rcu_read_lock(); tsk = find_task_by_pid_ns(pid, &init_pid_ns); - tsk->flags |= PF_NO_SETAFFINITY; + tsk->flags |= PF_NO_SETAFFINITY | PF_IDLE; set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id())); rcu_read_unlock(); @@ -938,6 +938,7 @@ void start_kernel(void) * time - but meanwhile we still have a functioning scheduler. */ sched_init(); + current->flags &= ~PF_IDLE; if (WARN(!irqs_disabled(), "Interrupts were enabled *very* early, fixing it\n")) -- 2.39.2 ^ permalink raw reply related [flat|nested] 43+ messages in thread
* Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible 2023-09-12 19:09 ` Liam R. Howlett @ 2023-09-12 20:01 ` Andreas Schwab 0 siblings, 0 replies; 43+ messages in thread From: Andreas Schwab @ 2023-09-12 20:01 UTC (permalink / raw) To: Liam R. Howlett Cc: linux-kernel, stable, maple-tree, linux-mm, Andrew Morton, linuxppc-dev, Michael Ellerman, Geert Uytterhoeven On Sep 12 2023, Liam R. Howlett wrote: > * Andreas Schwab <schwab@linux-m68k.org> [230912 14:15]: >> Any news? This is still broken. > > I have a proposed fix. I seem to have caused a pre-existing problem to > show up. Please see if the attached works for you, and I'll send it > to a lot of people. Thanks, it fixes the issue for me (tested both 6.5 and 6.6-rc1). -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different." ^ permalink raw reply [flat|nested] 43+ messages in thread
end of thread, other threads:[~2023-09-13 13:27 UTC | newest]
Thread overview: 43+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20230819004356.1454718-1-Liam.Howlett@oracle.com>
2023-08-19 0:43 ` [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible Liam R. Howlett
2023-08-29 16:42 ` Geert Uytterhoeven
2023-08-31 5:39 ` Michael Ellerman
2023-08-31 8:25 ` Geert Uytterhoeven
2023-08-31 8:45 ` Peng Zhang
2023-08-31 9:43 ` Geert Uytterhoeven
2023-09-06 15:23 ` Liam R. Howlett
2023-09-06 17:23 ` Paul E. McKenney
2023-09-06 17:29 ` Liam R. Howlett
2023-09-06 18:02 ` Paul E. McKenney
2023-09-11 23:54 ` Liam R. Howlett
2023-09-12 8:14 ` Paul E. McKenney
2023-09-12 8:23 ` Geert Uytterhoeven
2023-09-12 8:30 ` Paul E. McKenney
2023-09-12 8:34 ` Geert Uytterhoeven
2023-09-12 10:00 ` Paul E. McKenney
2023-09-12 13:56 ` Liam R. Howlett
2023-09-12 14:29 ` Liam R. Howlett
2023-09-12 15:08 ` Paul E. McKenney
2023-09-12 15:27 ` Christophe Leroy
2023-09-12 15:49 ` Liam R. Howlett
2023-09-12 15:07 ` Paul E. McKenney
2023-09-12 15:44 ` Liam R. Howlett
2023-09-12 16:49 ` Paul E. McKenney
2023-09-12 17:02 ` Christophe Leroy
2023-09-13 6:33 ` Christophe Leroy
2023-09-12 17:09 ` Christophe Leroy
2023-09-12 17:38 ` Liam R. Howlett
2023-09-13 13:14 ` Geert Uytterhoeven
2023-09-13 13:24 ` Liam R. Howlett
2023-09-13 13:26 ` Geert Uytterhoeven
2023-09-12 14:37 ` Christophe Leroy
2023-09-12 15:06 ` Christophe Leroy
2023-09-12 14:10 ` Matthew Wilcox
2023-09-12 14:17 ` Liam R. Howlett
2023-09-06 19:06 ` Geert Uytterhoeven
2023-09-11 12:27 ` Linux regression tracking #adding (Thorsten Leemhuis)
2023-08-30 19:49 ` Andreas Schwab
2023-08-31 5:37 ` Michael Ellerman
2023-08-31 19:01 ` Andreas Schwab
2023-09-12 18:15 ` Andreas Schwab
2023-09-12 19:09 ` Liam R. Howlett
2023-09-12 20:01 ` Andreas Schwab
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox