From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from down.free-electrons.com ([37.187.137.238]:49781 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932136AbbLGRYK convert rfc822-to-8bit (ORCPT ); Mon, 7 Dec 2015 12:24:10 -0500 From: Gregory CLEMENT To: Thomas Petazzoni Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Nadav Haklai , Lior Amsalem , linux-arm-kernel@lists.infradead.org, "# v4 . 0+" Subject: Re: [PATCH] ARM: mvebu: remove duplicated regulator definition in Armada 388 GP References: <1449235742-5785-1-git-send-email-thomas.petazzoni@free-electrons.com> Date: Mon, 07 Dec 2015 18:24:09 +0100 In-Reply-To: <1449235742-5785-1-git-send-email-thomas.petazzoni@free-electrons.com> (Thomas Petazzoni's message of "Fri, 4 Dec 2015 14:29:02 +0100") Message-ID: <87wpsqb29y.fsf@free-electrons.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8BIT Sender: stable-owner@vger.kernel.org List-ID: Hi Thomas, On ven., déc. 04 2015, Thomas Petazzoni wrote: > The Armada 388 GP Device Tree file describes two times a regulator > named 'reg_usb2_1_vbus', with the exact same description. This has > been wrong since Armada 388 GP support was introduced. > > Fixes: 928413bd859c0 ("ARM: mvebu: Add Armada 388 General Purpose Development Board support") > Signed-off-by: Thomas Petazzoni > Cc: # v4.0+ Applied on mvebu/dt Thanks, Gregory > --- > arch/arm/boot/dts/armada-388-gp.dts | 10 ---------- > 1 file changed, 10 deletions(-) > > diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts > index a633be3..cd31602 100644 > --- a/arch/arm/boot/dts/armada-388-gp.dts > +++ b/arch/arm/boot/dts/armada-388-gp.dts > @@ -303,16 +303,6 @@ > gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; > }; > > - reg_usb2_1_vbus: v5-vbus1 { > - compatible = "regulator-fixed"; > - regulator-name = "v5.0-vbus1"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - enable-active-high; > - regulator-always-on; > - gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; > - }; > - > reg_sata0: pwr-sata0 { > compatible = "regulator-fixed"; > regulator-name = "pwr_en_sata0"; > -- > 2.6.3 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com