messages from 2011-11-09 21:26:00 to 2011-11-09 21:29:18 UTC [more...]
[000/262] 3.0.9-stable review
2011-11-09 21:29 UTC (200+ messages)
` [038/262] epoll: fix spurious lockdep warnings
` [039/262] leds: save the delay values after a successful call to blink_set()
` [040/262] leds: turn the blink_timer off before starting to blink
` [041/262] usbmon vs. tcpdump: fix dropped packet count
` [042/262] USB: storage: Use normalized sense when emulating autosense
` [043/262] USB: Fix runtime wakeup on OHCI
` [044/262] USB: g_printer: fix bug in unregistration
` [045/262] usb/core/devio.c: Check for printer class specific request
` [046/262] USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid
` [047/262] usb: cdc-acm: Owen SI-30 support
` [048/262] USB: add RESET_RESUME for webcams shown to be quirky
` [049/262] USB: add quirk for Logitech C300 web cam
` [050/262] USB: pl2303: add id for SMART device
` [051/262] USB: ftdi_sio: add PID for Sony Ericsson Urban
` [052/262] USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
` [053/262] USB: option: convert interface blacklisting to bitfields
` [054/262] USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist
` [055/262] USB: option: add ZTE product 0x0037 to sendsetup blacklist
` [056/262] USB: option: add various ZTE device network interfaces to the blacklist
` [057/262] MAINTANERS: update Qualcomm Atheros addresses
` [058/262] ath9k_hw: Fix descriptor status of TxOpExceeded
` [059/262] ath9k_hw: Fix magnitude/phase coeff correction
` [060/262] ath9k_htc: add AVM FRITZ!WLAN 11N v2 support
` [061/262] ath9k_hw: Fix number of GPIO pins for AR9287/9300
` [062/262] ath9k: disable unnecessary PHY error reporting
` [063/262] HID: ACRUX - fix enabling force feedback support
` [064/262] QE/FHCI: fixed the CONTROL bug
` [065/262] Update email address for stable patch submission
` [066/262] xen-pcifront: Update warning comment to use e820_host option
` [067/262] xen-swiotlb: Fix wrong panic
` [068/262] kobj_uevent: Ignore if some listeners cannot handle message
` [069/262] caif: Fix BUG() with network namespaces
` [070/262] platform: samsung_laptop: add dmi information for Samsung R700 laptops
` [071/262] Platform: samsung_laptop: add support for X520 machines
` [072/262] Platform: samsung_laptop: samsung backlight for R528/R728
` [073/262] platform: samsung_laptop: fix samsung brightness min/max calculations
` [074/262] Platform: Fix error path in samsung-laptop init
` [075/262] kmod: prevent kmod_loop_msg overflow in __request_module()
` [076/262] Revert "NFS: Ensure that writeback_single_inode() calls write_inode() when syncing"
` [077/262] nfs: dont redirty inode when ncommit == 0 in nfs_commit_unstable_pages
` [078/262] ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)
` [079/262] rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
` [080/262] dp83640: free packet queues on remove
` [081/262] mac80211: fix offchannel TX cookie matching
` [082/262] net: hold sock reference while processing tx timestamps
` [083/262] wl12xx: fix forced passive scans
` [084/262] time: Change jiffies_to_clock_t() argument type to unsigned long
` [085/262] apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches
` [086/262] md/raid5: fix bug that could result in reads from a failed device
` [087/262] perf probe: Fix to show correct error string
` [088/262] tracing: Fix returning of duplicate data after EOF in trace_pipe_raw
` [089/262] genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
` [090/262] nfs: dont try to migrate pages with active requests
` [091/262] nfsd4: Remove check for a 32-bit cookie in nfsd4_readdir()
` [092/262] nfsd4: stop using nfserr_resource for transitory errors
` [093/262] nfsd4: fix seqid_mutating_error
` [094/262] nfsd4: permit read opens of executable-only files
` [095/262] nfsd4: fix open downgrade, again
` [096/262] nfsd4: ignore WANT bits in open downgrade
` [097/262] hppfs: missing include
` [098/262] vfs: add "device" tag to /proc/self/mountstats
` [099/262] io-mapping: ensure io_mapping_map_atomic _is_ atomic
` [100/262] ASoC: wm8940: Properly set codec->dapm.bias_level
` [101/262] ASoC: wm8741: Fix setting interface format for DSP modes
` [102/262] ASoC: ak4642: fixup cache register table
` [103/262] ASoC: ak4535: "
` [104/262] ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture
` [105/262] ASoC: Remove direct register cache accesses from WM8962 driver
` [106/262] ASoC: Fix a bug in WM8962 DSP_A and DSP_B settings
` [107/262] KVM: s390: check cpu_id prior to using it
` [108/262] [S390] user per registers vs. ptrace single stepping
` [109/262] [S390] memory leak with RCU_TABLE_FREE
` [110/262] [S390] ccwgroup: move attributes to attribute group
` [111/262] WMI: properly cleanup devices to avoid crashes
` [112/262] iommu/amd: Fix wrong shift direction
` [113/262] carminefb: Fix module parameters permissions
` [114/262] fb: avoid possible deadlock caused by fb_set_suspend
` [115/262] fb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock()
` [116/262] viafb: use display information in info not in var for panning
` [117/262] viafb: improve pitch handling
` [118/262] [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset
` [119/262] [media] DiBcom: protect the I2C bufer access
` [120/262] [media] dib0700: protect the dib0700 buffer access
` [121/262] [media] tuner_xc2028: Allow selection of the frequency adjustment code for XC3028
` [122/262] /proc/self/numa_maps: restore "huge" tag for hugetlb vmas
` [123/262] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when thats desired
` [124/262] ARM: mach-ux500: unlock I&D l2x0 caches before init
` [125/262] mm: avoid null pointer access in vm_struct via /proc/vmallocinfo
` [126/262] ALSA: hda - Fix ADC input-amp handling for Cx20549 codec
` [127/262] um: fix ubd cow size
` [128/262] readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
` [129/262] VFS: Fix automount for negative autofs dentries
` [130/262] vfs: automount should ignore LOOKUP_FOLLOW
` [131/262] VFS: Fix the remaining automounter semantics regressions
` [132/262] vfs pathname lookup: Add LOOKUP_AUTOMOUNT flag
` [133/262] ptrace: dont clear GROUP_STOP_SIGMASK on double-stop
` [134/262] jsm: remove buggy write queue
` [135/262] bonding: use local function pointer of bond->recv_probe in bond_handle_frame
` [136/262] bridge: fix hang on removal of bridge via netlink
` [137/262] can bcm: fix tx_setup off-by-one errors
` [138/262] ipv4: fix ipsec forward performance regression
` [139/262] l2tp: fix a potential skb leak in l2tp_xmit_skb()
` [140/262] macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
` [141/262] netconsole: enable netconsole can make net_device refcnt incorrent
` [142/262] tcp: properly handle md5sig_pool references
` [143/262] tcp: properly update lost_cnt_hint during shifting
` [144/262] tg3: negate USE_PHYLIB flag check
` [145/262] ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
` [146/262] make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
` [147/262] net: xen-netback: correctly restart Tx after a VM restore/migrate
` [148/262] mm: thp: tail page refcounting fix
` [149/262] binfmt_elf: fix PIE execution with randomization disabled
` [150/262] vfs: show O_CLOEXE bit properly in /proc/<pid>/fdinfo/<fd> files
` [151/262] iwlagn: do not use interruptible waits
` [152/262] drivers/net/rionet.c: fix ethernet address macros for LE platforms
` [153/262] hwspinlock/core: use a mutex to protect the radix tree
` [154/262] drivers/power/ds2780_battery.c: create central point for calling w1 interface
` [155/262] drivers/power/ds2780_battery.c: add a nolock function to "
` [156/262] drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
` [157/262] ext2,ext3,ext4: dont inherit APPEND_FL or IMMUTABLE_FL for new inodes
` [158/262] ext4: ext4_rename should dirty dir_bh with the correct directory
` [159/262] ext4: ext4_mkdir should dirty dir_block with newly created directory inode
` [160/262] ext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry
` [161/262] ext4: fix race in xattr block allocation path
` [162/262] enic: Bug Fix: Fix hardware transmit queue indexing in enic_poll_controller
` [163/262] rtl8150: rtl8150_disconnect(...) does not need tasklet_disable(...)
` [164/262] USB: EHCI: Fix test mode sequence
` [165/262] usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlink
` [166/262] USB: Serial: Add device ID for Sierra Wireless MC8305
` [167/262] USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-device
` [168/262] usbnet/cdc_ncm: Dont use stack variables for DMA
` [169/262] USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth
` [170/262] ipheth: iPhone 4 Verizon CDMA USB Product ID add
` [171/262] USB: xHCI: prevent infinite loop when processing MSE event
` [172/262] ASIX: Simplify condition in rx_fixup()
` [173/262] ASIX: Use only 11 bits of header for data size
` [174/262] Bluetooth: Add MacBookAir4,1 support
` [175/262] Bluetooth: Add Toshiba laptops AR30XX device ID
` [176/262] Bluetooth: Add Atheros AR3012 one PID/VID supported
` [177/262] Bluetooth: add support for 2011 mac mini
` [178/262] btusb: add device entry for Broadcom SoftSailing
` [179/262] usb_storage: Dont freeze in usb-stor-scan
` [180/262] xhci: If no endpoints changed, dont issue BW command
` [181/262] xHCI: test and clear RWC bit
` [182/262] xHCI: Clear PLC for USB2 root hub ports
` [183/262] can bcm: fix incomplete tx_setup fix
` [184/262] powerpc: remove superfluous PageTail checks on the pte gup_fast
` [185/262] powerpc: get_hugepte() dont put_page() the wrong page
` [186/262] powerpc: gup_hugepte() avoid freeing the head page too many times
` [187/262] powerpc: gup_hugepte() support THP based tail recounting
` [188/262] powerpc: gup_huge_pmd() return 0 if pte changes
` [189/262] s390: gup_huge_pmd() support THP tail recounting
` [190/262] s390: gup_huge_pmd() return 0 if pte changes
` [191/262] thp: share get_huge_page_tail()
` [192/262] bridge: leave carrier on for empty bridge
` [193/262] net: Unlock sock before calling sk_free()
` [194/262] ALSA: ua101: fix crash when unplugging
` [195/262] ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default
` [196/262] ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs
` [197/262] ALSA: hda/realtek - Skip invalid digital out pins
` [198/262] drm/radeon: avoid bouncing connector status btw disconnected & unknown
` [199/262] drm/radeon/kms: split MSI check into a separate function
` [200/262] drm/radeon/kms: Add MSI quirk for HP RS690
` [201/262] drm/radeon: set hpd polarity at init time so hotplug detect works
` [202/262] drm/radeon/kms: properly set panel mode for eDP
` [203/262] drm/radeon/kms: Add MSI quirk for Dell RS690
` [204/262] drm/radeon/kms: add MSI module parameter
` [205/262] drm/radeon/kms: set HPD polarity in hpd_init()
` [206/262] kbuild: Fix help text not displayed in choice option
` [207/262] PM / Runtime: Automatically retry failed autosuspends
` [208/262] USB: Update last_busy time after autosuspend fails
` [209/262] cciss: add small delay when using PCI Power Management to reset for kump
` [210/262] hwmon: (coretemp) Fix for non-SMP builds
` [211/262] hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types
` [212/262] hwmon: (w83627ehf) Fix broken driver init
` [213/262] tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB
` [214/262] [SCSI] st: fix race in st_scsi_execute_end
` [215/262] [SCSI] scsi_dh: check queuedata pointer before proceeding further
` [216/262] [SCSI] Make scsi_free_queue() kill pending SCSI commands
` [217/262] [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev
` [218/262] [SCSI] mpt2sas: Fix for system hang when discovery in progress
` [219/262] ASoC: wm8711: Fix wrong mask for setting input audio data bit length select
` [220/262] ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt
` [221/262] ASoC: WM8904: Set `invert bit for Capture Switch
` [222/262] ASoC: Ensure WM8962 PLL registers are reset
` [223/262] ASoC: Ensure the WM8962 oscillator and PLLs start up disabled
` [224/262] NFS/sunrpc: dont use a credential with extra groups
` [225/262] block: make gendisk hold a reference to its queue
` [226/262] xen/blkback: Report VBD_WSECT (wr_sect) properly
` [227/262] VFS: fix statfs() automounter semantics regression
` [228/262] hpsa: add small delay when using PCI Power Management to reset for kump
` [229/262] VFS: we need to set LOOKUP_JUMPED on mountpoint crossing
` [230/262] powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nid
` [231/262] powerpc: Fix oops when echoing bad values to /sys/devices/system/memory/probe
` [232/262] powerpc/pseries: Avoid spurious error during hotplug CPU add
` [233/262] powerpc/eeh: Fix /proc/ppc64/eeh creation
` [234/262] powerpc: Fix deadlock in icswx code
` [235/262] ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast()
` [236/262] netlink: validate NLA_MSECS length
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox