messages from 2013-03-18 04:22:49 to 2013-03-18 21:11:17 UTC [more...]
[ 00/40] 3.0.70-stable review
2013-03-18 21:11 UTC (40+ messages)
` [ 01/40] qcaux: add Franklin U600
` [ 02/40] virtio: rng: disallow multiple device registrations, fixes crashes
` [ 03/40] USB: option: add Huawei E5331
` [ 04/40] USB: cdc-wdm: fix buffer overflow
` [ 05/40] usb: cp210x new Vendor/Device IDs
` [ 06/40] USB: added support for Cinterions products AH6 and PLS8
` [ 07/40] usb: serial: Add Rigblaster Advantage to device table
` [ 08/40] USB: storage: fix Huawei mode switching regression
` [ 09/40] USB: EHCI: dont check DMA values in QH overlays
` [ 10/40] staging: vt6656: Fix oops on resume from suspend
` [ 11/40] signal: always clear sa_restorer on execve
` [ 12/40] ext3: Fix format string issues
` [ 13/40] tty: serial: fix typo "ARCH_S5P6450"
` [ 14/40] TTY: do not reset masters packet mode
` [ 15/40] md: protect against crash upon fsync on ro array
` [ 16/40] Revert duplicated perf commit
` [ 17/40] ALSA: seq: Fix missing error handling in snd_seq_timer_open()
` [ 18/40] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
` [ 19/40] w1: fix oops when w1_search is called from netlink connector
` [ 20/40] powerpc: Fix cputable entry for 970MP rev 1.0
` [ 21/40] selinux: use GFP_ATOMIC under spin_lock
` [ 22/40] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume
` [ 23/40] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume
` [ 24/40] perf,x86: fix link failure for non-Intel configs
` [ 25/40] s390/mm: fix flush_tlb_kernel_range()
` [ 26/40] btrfs: use rcu_barrier() to wait for bdev puts at unmount
` [ 27/40] drm/i915: EBUSY status handling added to i915_gem_fault()
` [ 28/40] hwmon: (sht15) Fix memory leak if regulator_enable() fails
` [ 29/40] block: use i_size_write() in bd_set_size()
` [ 30/40] loopdev: fix a deadlock
` [ 31/40] l2tp: Restore socket refcount when sendmsg succeeds
` [ 32/40] rds: limit the size allocated by rds_message_alloc()
` [ 33/40] net: ipv6: Dont purge default router if accept_ra=2
` [ 34/40] tcp: fix double-counted receiver RTT when leaving receiver fast path
` [ 35/40] tun: add a missing nf_reset() in tun_net_xmit()
` [ 36/40] netlabel: correctly list all the static label mappings
` [ 37/40] bridging: fix rx_handlers return code
` [ 38/40] ipv6: stop multicast forwarding to process interface scoped addresses
` [ 39/40] rtnl: fix info leak on RTM_GETLINK request for VF devices
[ 00/48] 3.4.37-stable review
2013-03-18 21:08 UTC (49+ messages)
` [ 01/48] qcaux: add Franklin U600
` [ 02/48] xen/pciback: Dont disable a PCI device that is already disabled
` [ 03/48] virtio: rng: disallow multiple device registrations, fixes crashes
` [ 04/48] USB: option: add Huawei E5331
` [ 05/48] USB: cdc-wdm: fix buffer overflow
` [ 06/48] usb: cp210x new Vendor/Device IDs
` [ 07/48] USB: added support for Cinterions products AH6 and PLS8
` [ 08/48] usb: serial: Add Rigblaster Advantage to device table
` [ 09/48] USB: storage: fix Huawei mode switching regression
` [ 10/48] USB: EHCI: dont check DMA values in QH overlays
` [ 11/48] staging: vt6656: Fix oops on resume from suspend
` [ 12/48] signal: always clear sa_restorer on execve
` [ 13/48] ext3: Fix format string issues
` [ 14/48] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller
` [ 15/48] tty: serial: fix typo "ARCH_S5P6450"
` [ 16/48] TTY: do not reset masters packet mode
` [ 17/48] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume
` [ 18/48] ALSA: seq: Fix missing error handling in snd_seq_timer_open()
` [ 19/48] hwmon: (pmbus/ltc2978) Fix temperature reporting
` [ 20/48] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
` [ 21/48] w1: fix oops when w1_search is called from netlink connector
` [ 22/48] powerpc: Fix STAB initialization
` [ 23/48] powerpc: Fix cputable entry for 970MP rev 1.0
` [ 24/48] selinux: use GFP_ATOMIC under spin_lock
` [ 25/48] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume
` [ 26/48] perf,x86: fix link failure for non-Intel configs
` [ 27/48] s390: critical section cleanup vs. machine checks
` [ 28/48] s390/mm: fix flush_tlb_kernel_range()
` [ 29/48] btrfs: use rcu_barrier() to wait for bdev puts at unmount
` [ 30/48] atmel_lcdfb: fix 16-bpp modes on older SOCs
` [ 31/48] drm/i915: EBUSY status handling added to i915_gem_fault()
` [ 32/48] hwmon: (sht15) Fix memory leak if regulator_enable() fails
` [ 33/48] block: use i_size_write() in bd_set_size()
` [ 34/48] loopdev: fix a deadlock
` [ 35/48] loopdev: remove an user triggerable oops
` [ 36/48] drm/i915: Increase the RC6p threshold
` [ 37/48] l2tp: Restore socket refcount when sendmsg succeeds
` [ 38/48] rds: limit the size allocated by rds_message_alloc()
` [ 39/48] net: ipv6: Dont purge default router if accept_ra=2
` [ 40/48] tcp: fix double-counted receiver RTT when leaving receiver fast path
` [ 41/48] tun: add a missing nf_reset() in tun_net_xmit()
` [ 42/48] macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode
` [ 43/48] netlabel: correctly list all the static label mappings
` [ 44/48] bridging: fix rx_handlers return code
` [ 45/48] ipv6: stop multicast forwarding to process interface scoped addresses
` [ 46/48] rtnl: fix info leak on RTM_GETLINK request for VF devices
` [ 47/48] dcbnl: fix various netlink info leaks
` [ 48/48] 6lowpan: Fix endianness issue in is_addr_link_local()
[ 00/75] 3.8.4-stable review
2013-03-18 21:07 UTC (76+ messages)
` [ 01/75] qcaux: add Franklin U600
` [ 02/75] xen/pciback: Dont disable a PCI device that is already disabled
` [ 03/75] virtio: rng: disallow multiple device registrations, fixes crashes
` [ 04/75] USB: option: add Huawei E5331
` [ 05/75] USB: cdc-wdm: fix buffer overflow
` [ 06/75] tools: usb: ffs-test: Fix build failure
` [ 07/75] usb: dwc3: core: dont forget to free coherent memory
` [ 08/75] usb: cp210x new Vendor/Device IDs
` [ 09/75] USB: added support for Cinterions products AH6 and PLS8
` [ 10/75] usb: serial: Add Rigblaster Advantage to device table
` [ 11/75] USB: storage: fix Huawei mode switching regression
` [ 12/75] USB: EHCI: work around silicon bug in Intels EHCI controllers
` [ 13/75] USB: EHCI: dont check DMA values in QH overlays
` [ 14/75] staging: vt6656: Fix oops on resume from suspend
` [ 15/75] staging: comedi: dt9812: use CR_CHAN() for channel number
` [ 16/75] qcserial: bind to DM/DIAG port on Gobi 1K devices
` [ 17/75] signal: always clear sa_restorer on execve
` [ 18/75] ext3: Fix format string issues
` [ 19/75] tty/8250_pnp: serial port detection regression since v3.7
` [ 20/75] serial: 8250: Keep 8250.<xxxx> module options functional after driver rename
` [ 21/75] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller
` [ 22/75] tty: serial: fix typo "ARCH_S5P6450"
` [ 23/75] tty: serial: fix typo "SERIAL_S3C2412"
` [ 24/75] tty/serial: Add support for Altera serial port
` [ 25/75] TTY: disable debugging warning
` [ 26/75] TTY: do not reset masters packet mode
` [ 27/75] Fix 4 port and add support for 8 port Unknown PCI serial port cards
` [ 28/75] ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels
` [ 29/75] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume
` [ 30/75] ALSA: seq: Fix missing error handling in snd_seq_timer_open()
` [ 31/75] ARM: w1-gpio: fix erroneous gpio requests
` [ 32/75] hwmon: (pmbus/ltc2978) Fix temperature reporting
` [ 33/75] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
` [ 34/75] w1-gpio: remove erroneous __exit and __exit_p()
` [ 35/75] w1: fix oops when w1_search is called from netlink connector
` [ 36/75] powerpc: Fix STAB initialization
` [ 37/75] powerpc: Fix cputable entry for 970MP rev 1.0
` [ 38/75] powerpc: Make VSID_BITS* dependency explicit
` [ 39/75] powerpc: Update kernel VSID range
` [ 40/75] powerpc: Rename USER_ESID_BITS* to ESID_BITS*
` [ 41/75] ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830
` [ 42/75] selinux: use GFP_ATOMIC under spin_lock
` [ 43/75] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume
` [ 44/75] perf,x86: fix link failure for non-Intel configs
` [ 45/75] s390: critical section cleanup vs. machine checks
` [ 46/75] s390/mm: fix flush_tlb_kernel_range()
` [ 47/75] btrfs: use rcu_barrier() to wait for bdev puts at unmount
` [ 48/75] mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY
` [ 49/75] kbuild: fix make headers_check with make 3.80
` [ 50/75] atmel_lcdfb: fix 16-bpp modes on older SOCs
` [ 51/75] net/mlx4_en: Initialize RFS filters lock and list in init_netdev
` [ 52/75] net/mlx4_en: Disable RFS when running in SRIOV mode
` [ 53/75] block: use i_size_write() in bd_set_size()
` [ 54/75] loopdev: fix a deadlock
` [ 55/75] loopdev: remove an user triggerable oops
` [ 56/75] net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATS
` [ 57/75] l2tp: Restore socket refcount when sendmsg succeeds
` [ 58/75] atl1c: restore buffer state
` [ 59/75] rds: limit the size allocated by rds_message_alloc()
` [ 60/75] net: ipv6: Dont purge default router if accept_ra=2
` [ 61/75] tcp: fix double-counted receiver RTT when leaving receiver fast path
` [ 62/75] tun: add a missing nf_reset() in tun_net_xmit()
` [ 63/75] vxlan: fix oops when delete netns containing vxlan
` [ 64/75] bonding: fire NETDEV_RELEASE event only on 0 slaves
` [ 65/75] team: unsyc the devices addresses when port is removed
` [ 66/75] macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode
` [ 67/75] netlabel: correctly list all the static label mappings
` [ 68/75] bridging: fix rx_handlers return code
` [ 69/75] ipv6: stop multicast forwarding to process interface scoped addresses
` [ 70/75] bridge: fix mdb info leaks
` [ 71/75] rtnl: fix info leak on RTM_GETLINK request for VF devices
` [ 72/75] dcbnl: fix various netlink info leaks
` [ 73/75] 6lowpan: Fix endianness issue in is_addr_link_local()
` [ 74/75] Revert "drm/i915: enable irqs earlier when resuming"
` [ 75/75] Revert "drm/i915: reorder setup sequence to have irqs for output setup"
[ 00/21] 3.0.69-stable review
2013-03-18 21:00 UTC (5+ messages)
` [ 04/21] target/pscsi: Fix page increment
Revert a bunch of patches in stable kernels
2013-03-18 20:18 UTC (3+ messages)
[tip:x86/urgent] x86-64: Fix the failure case in copy_user_handle_tail()
2013-03-18 20:05 UTC
[ 000/100] 3.8.3-stable review
2013-03-18 19:50 UTC (5+ messages)
` [ 052/100] drm/i915: Increase the RC6p threshold
Stable kernel 3.8.3 appears to break displayport on intel gen4
2013-03-18 19:24 UTC (3+ messages)
udelay function delays the wrong time interval in multiprocessor system, if ARCH_HAS_READ_CURRENT_TIMER is not defined and on current timer is used
2013-03-18 15:25 UTC (7+ messages)
[PATCH v2] gpio: stmpe: pass DT node to irqdomain
2013-03-18 10:45 UTC
[3.5.y.z extended stable] Linux 3.5.7.8
2013-03-18 9:45 UTC (2+ messages)
[ 00/82] 3.2.41-stable review
2013-03-18 5:00 UTC (20+ messages)
` [ 65/82] signal: always clear sa_restorer on execve
` [ 66/82] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes
` [ 67/82] hwmon: (pmbus/ltc2978) Fix temperature reporting
` [ 68/82] crypto: user - fix info leaks in report API
` [ 69/82] Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys
` [ 70/82] USB: Dont use EHCI port sempahore for USB 3.0 hubs
` [ 71/82] USB: Prepare for refactoring by adding extra udev checks
` [ 72/82] USB: Rip out recursive call on warm port reset
` [ 73/82] USB: Fix connected device switch to Inactive state
` [ 74/82] batman-adv: bat_socket_read missing checks
` [ 75/82] batman-adv: Only write requested number of byte to user buffer
` [ 76/82] mm/hotplug: correctly add new zone to all other nodes zone lists
` [ 77/82] xen-netfront: delay gARP until backend switches to Connected
` [ 78/82] block: use i_size_write() in bd_set_size()
` [ 79/82] loopdev: fix a deadlock
` [ 80/82] loopdev: remove an user triggerable oops
` [ 81/82] btrfs: use rcu_barrier() to wait for bdev puts at unmount
` [ 82/82] NLS: improve UTF8 -> UTF16 string conversion routine
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).