stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2019-07-19 04:20:27 to 2019-07-19 04:32:32 UTC [more...]

[PATCH AUTOSEL 5.1 001/141] drm/panel: simple: Fix panel_simple_dsi_probe
 2019-07-19  4:02 UTC  (86+ messages)
` [PATCH AUTOSEL 5.1 031/141] drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry
` [PATCH AUTOSEL 5.1 034/141] memstick: Fix error cleanup path of memstick_init
` [PATCH AUTOSEL 5.1 036/141] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 5.1 037/141] serial: 8250: Fix TX interrupt handling condition
` [PATCH AUTOSEL 5.1 038/141] drm/amd/display: Always allocate initial connector state state
` [PATCH AUTOSEL 5.1 039/141] drm/virtio: Add memory barriers for capset cache
` [PATCH AUTOSEL 5.1 040/141] drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnect
` [PATCH AUTOSEL 5.1 041/141] phy: renesas: rcar-gen2: Fix memory leak at error paths
` [PATCH AUTOSEL 5.1 043/141] powerpc/pseries/mobility: prevent cpu hotplug during DT update
` [PATCH AUTOSEL 5.1 044/141] dma-remap: Avoid de-referencing NULL atomic_pool
` [PATCH AUTOSEL 5.1 045/141] drm/rockchip: Properly adjust to a true clock in adjusted_mode
` [PATCH AUTOSEL 5.1 046/141] platform/x86: asus-wmi: Increase input buffer size of WMI methods
` [PATCH AUTOSEL 5.1 048/141] iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 5.1 049/141] serial: imx: fix locking in set_termios()
` [PATCH AUTOSEL 5.1 050/141] serial: uartps: Use the same dynamic major number for all ports
` [PATCH AUTOSEL 5.1 051/141] tty: serial_core: Set port active bit in uart_port_activate
` [PATCH AUTOSEL 5.1 052/141] usb: gadget: Zero ffs_io_data
` [PATCH AUTOSEL 5.1 053/141] kvm: vmx: fix limit checking in get_vmx_mem_address()
` [PATCH AUTOSEL 5.1 054/141] usb: gadget: storage: Remove warning message
` [PATCH AUTOSEL 5.1 055/141] mmc: sdhci: sdhci-pci-o2micro: Check if controller supports 8-bit width
` [PATCH AUTOSEL 5.1 057/141] kvm: vmx: segment limit check: use access length
` [PATCH AUTOSEL 5.1 058/141] powerpc/pci/of: Fix OF flags parsing for 64bit BARs
` [PATCH AUTOSEL 5.1 059/141] drm/msm: Depopulate platform on probe failure
` [PATCH AUTOSEL 5.1 060/141] serial: mctrl_gpio: Check if GPIO property exisits before requesting it
` [PATCH AUTOSEL 5.1 061/141] staging: ks7010: Fix build error
` [PATCH AUTOSEL 5.1 062/141] PCI: sysfs: Ignore lockdep for remove attribute
` [PATCH AUTOSEL 5.1 063/141] i2c: stm32f7: fix the get_irq error cases
` [PATCH AUTOSEL 5.1 064/141] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 5.1 065/141] kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS
` [PATCH AUTOSEL 5.1 066/141] genksyms: Teach parser about 128-bit built-in types
` [PATCH AUTOSEL 5.1 067/141] PCI: xilinx-nwl: Fix Multi MSI data programming
` [PATCH AUTOSEL 5.1 068/141] iio: iio-utils: Fix possible incorrect mask calculation
` [PATCH AUTOSEL 5.1 070/141] powerpc/xmon: Fix disabling tracing while in xmon
` [PATCH AUTOSEL 5.1 071/141] powerpc/rtas: retry when cpu offline races with suspend/migration
` [PATCH AUTOSEL 5.1 075/141] mfd: core: Set fwnode for created devices
` [PATCH AUTOSEL 5.1 076/141] mfd: arizona: Fix undefined behavior
` [PATCH AUTOSEL 5.1 078/141] mm/swap: fix release_pages() when releasing devmap pages
` [PATCH AUTOSEL 5.1 079/141] um: Silence lockdep complaint about mmap_sem
` [PATCH AUTOSEL 5.1 080/141] f2fs: fix is_idle() check for discard type
` [PATCH AUTOSEL 5.1 082/141] RDMA/i40iw: Set queue pair state when being queried
` [PATCH AUTOSEL 5.1 083/141] serial: sh-sci: Terminate TX DMA during buffer flushing
` [PATCH AUTOSEL 5.1 084/141] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
` [PATCH AUTOSEL 5.1 085/141] IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE
` [PATCH AUTOSEL 5.1 087/141] IB/ipoib: Add child to parent list only if device initialized
` [PATCH AUTOSEL 5.1 088/141] arm64: assembler: Switch ESB-instruction with a vanilla nop if !ARM64_HAS_RAS
` [PATCH AUTOSEL 5.1 089/141] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
` [PATCH AUTOSEL 5.1 090/141] KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT
` [PATCH AUTOSEL 5.1 091/141] PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows
` [PATCH AUTOSEL 5.1 092/141] PCI: mobiveil: Fix the Class Code field
` [PATCH AUTOSEL 5.1 094/141] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers
` [PATCH AUTOSEL 5.1 095/141] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions
` [PATCH AUTOSEL 5.1 096/141] perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning
` [PATCH AUTOSEL 5.1 097/141] perf stat: Fix use-after-freed pointer detected by the smatch tool
` [PATCH AUTOSEL 5.1 098/141] perf top: Fix potential NULL pointer dereference "
` [PATCH AUTOSEL 5.1 100/141] perf session: Fix potential NULL pointer dereference found "
` [PATCH AUTOSEL 5.1 101/141] perf map: Fix potential NULL pointer dereference found by "
` [PATCH AUTOSEL 5.1 102/141] perf annotate: Fix dereferencing freed memory found by the "
` [PATCH AUTOSEL 5.1 103/141] perf hists browser: Fix potential NULL pointer dereference "
` [PATCH AUTOSEL 5.1 105/141] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
` [PATCH AUTOSEL 5.1 106/141] perf intel-bts: Fix potential NULL pointer dereference found by the smatch tool
` [PATCH AUTOSEL 5.1 108/141] nvme-pci: check for NULL return from pci_alloc_p2pmem()
` [PATCH AUTOSEL 5.1 109/141] nvme-pci: limit max_hw_sectors based on the DMA max mapping size
` [PATCH AUTOSEL 5.1 110/141] nvme-tcp: don't use sendpage for SLAB pages
` [PATCH AUTOSEL 5.1 111/141] nvme-tcp: set the STABLE_WRITES flag when data digests are enabled
` [PATCH AUTOSEL 5.1 112/141] powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
` [PATCH AUTOSEL 5.1 113/141] block: init flush rq ref count to 1
` [PATCH AUTOSEL 5.1 114/141] rds: Accept peer connection reject messages due to incompatible version
` [PATCH AUTOSEL 5.1 115/141] f2fs: fix to avoid long latency during umount
` [PATCH AUTOSEL 5.1 116/141] f2fs: avoid out-of-range memory access
` [PATCH AUTOSEL 5.1 117/141] mailbox: handle failed named mailbox channel request
` [PATCH AUTOSEL 5.1 118/141] dlm: check if workqueues are NULL before flushing/destroying
` [PATCH AUTOSEL 5.1 120/141] s390/dasd: Make layout analysis ESE compatible
` [PATCH AUTOSEL 5.1 121/141] net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn
` [PATCH AUTOSEL 5.1 122/141] platform/x86: Fix PCENGINES_APU2 Kconfig warning
` [PATCH AUTOSEL 5.1 123/141] block/bio-integrity: fix a memory leak bug
` [PATCH AUTOSEL 5.1 125/141] sh: prevent warnings when using iounmap
` [PATCH AUTOSEL 5.1 126/141] mm/kmemleak.c: fix check for softirq context
` [PATCH AUTOSEL 5.1 128/141] mm/mincore.c: fix race between swapoff and mincore
` [PATCH AUTOSEL 5.1 129/141] mm/gup.c: mark undo_dev_pagemap as __maybe_unused
` [PATCH AUTOSEL 5.1 130/141] mm/gup.c: remove some BUG_ONs from get_gate_page()
` [PATCH AUTOSEL 5.1 131/141] memcg, fsnotify: no oom-kill for remote memcg charging
` [PATCH AUTOSEL 5.1 132/141] mm/mmu_notifier: use hlist_add_head_rcu()
` [PATCH AUTOSEL 5.1 133/141] proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup
` [PATCH AUTOSEL 5.1 135/141] proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
` [PATCH AUTOSEL 5.1 141/141] mm, swap: fix race between swapoff and some swap operations

Floppy ioctl range clamping fixes
 2019-07-19  4:29 UTC 

[PATCH AUTOSEL 4.19 001/101] drm/panel: simple: Fix panel_simple_dsi_probe
 2019-07-19  4:07 UTC  (74+ messages)
` [PATCH AUTOSEL 4.19 004/101] staging: vt6656: use meaningful error code during buffer allocation
` [PATCH AUTOSEL 4.19 005/101] usb: core: hub: Disable hub-initiated U1/U2
` [PATCH AUTOSEL 4.19 006/101] tty: max310x: Fix invalid baudrate divisors calculator
` [PATCH AUTOSEL 4.19 007/101] pinctrl: rockchip: fix leaked of_node references
` [PATCH AUTOSEL 4.19 008/101] tty: serial: cpm_uart - fix init when SMC is relocated
` [PATCH AUTOSEL 4.19 011/101] drm/amdgpu/sriov: Need to initialize the HDP_NONSURFACE_BAStE
` [PATCH AUTOSEL 4.19 012/101] drm/amd/display: Disable ABM before destroy ABM struct
` [PATCH AUTOSEL 4.19 014/101] drm/amdkfd: Fix sdma queue map issue
` [PATCH AUTOSEL 4.19 015/101] drm/edid: Fix a missing-check bug in drm_load_edid_firmware()
` [PATCH AUTOSEL 4.19 016/101] PCI: Return error if cannot probe VF
` [PATCH AUTOSEL 4.19 017/101] drm/bridge: tc358767: read display_props in get_modes()
` [PATCH AUTOSEL 4.19 018/101] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
` [PATCH AUTOSEL 4.19 019/101] gpu: host1x: Increase maximum DMA segment size
` [PATCH AUTOSEL 4.19 020/101] drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry
` [PATCH AUTOSEL 4.19 022/101] memstick: Fix error cleanup path of memstick_init
` [PATCH AUTOSEL 4.19 023/101] tty/serial: digicolor: Fix digicolor-usart already registered warning
` [PATCH AUTOSEL 4.19 024/101] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 4.19 025/101] serial: 8250: Fix TX interrupt handling condition
` [PATCH AUTOSEL 4.19 026/101] drm/amd/display: Always allocate initial connector state state
` [PATCH AUTOSEL 4.19 028/101] phy: renesas: rcar-gen2: Fix memory leak at error paths
` [PATCH AUTOSEL 4.19 029/101] drm/amd/display: fix compilation error
` [PATCH AUTOSEL 4.19 031/101] drm/rockchip: Properly adjust to a true clock in adjusted_mode
` [PATCH AUTOSEL 4.19 032/101] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks
` [PATCH AUTOSEL 4.19 033/101] serial: imx: fix locking in set_termios()
` [PATCH AUTOSEL 4.19 034/101] tty: serial_core: Set port active bit in uart_port_activate
` [PATCH AUTOSEL 4.19 037/101] mmc: sdhci: sdhci-pci-o2micro: Check if controller supports 8-bit width
` [PATCH AUTOSEL 4.19 038/101] powerpc/pci/of: Fix OF flags parsing for 64bit BARs
` [PATCH AUTOSEL 4.19 039/101] drm/msm: Depopulate platform on probe failure
` [PATCH AUTOSEL 4.19 040/101] serial: mctrl_gpio: Check if GPIO property exisits before requesting it
` [PATCH AUTOSEL 4.19 041/101] PCI: sysfs: Ignore lockdep for remove attribute
` [PATCH AUTOSEL 4.19 042/101] i2c: stm32f7: fix the get_irq error cases
` [PATCH AUTOSEL 4.19 043/101] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 4.19 044/101] kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS
` [PATCH AUTOSEL 4.19 046/101] PCI: xilinx-nwl: Fix Multi MSI data programming
` [PATCH AUTOSEL 4.19 047/101] iio: iio-utils: Fix possible incorrect mask calculation
` [PATCH AUTOSEL 4.19 049/101] powerpc/xmon: Fix disabling tracing while in xmon
` [PATCH AUTOSEL 4.19 050/101] recordmcount: Fix spurious mcount entries on powerpc
` [PATCH AUTOSEL 4.19 051/101] mfd: madera: Add missing of table registration
` [PATCH AUTOSEL 4.19 053/101] mfd: arizona: Fix undefined behavior
` [PATCH AUTOSEL 4.19 055/101] mm/swap: fix release_pages() when releasing devmap pages
` [PATCH AUTOSEL 4.19 057/101] powerpc/4xx/uic: clear pending interrupt after irq type/pol change
` [PATCH AUTOSEL 4.19 059/101] serial: sh-sci: Terminate TX DMA during buffer flushing
` [PATCH AUTOSEL 4.19 060/101] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
` [PATCH AUTOSEL 4.19 061/101] IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE
` [PATCH AUTOSEL 4.19 062/101] powerpc/mm: Handle page table allocation failures
` [PATCH AUTOSEL 4.19 063/101] IB/ipoib: Add child to parent list only if device initialized
` [PATCH AUTOSEL 4.19 065/101] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
` [PATCH AUTOSEL 4.19 066/101] PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows
` [PATCH AUTOSEL 4.19 067/101] PCI: mobiveil: Fix the Class Code field
` [PATCH AUTOSEL 4.19 068/101] kallsyms: exclude kasan local symbols on s390
` [PATCH AUTOSEL 4.19 069/101] PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers
` [PATCH AUTOSEL 4.19 070/101] PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions
` [PATCH AUTOSEL 4.19 072/101] perf stat: Fix use-after-freed pointer detected by the smatch tool
` [PATCH AUTOSEL 4.19 076/101] perf hists browser: Fix potential NULL pointer dereference found "
` [PATCH AUTOSEL 4.19 078/101] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
` [PATCH AUTOSEL 4.19 079/101] powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
` [PATCH AUTOSEL 4.19 080/101] block: init flush rq ref count to 1
` [PATCH AUTOSEL 4.19 081/101] f2fs: avoid out-of-range memory access
` [PATCH AUTOSEL 4.19 082/101] mailbox: handle failed named mailbox channel request
` [PATCH AUTOSEL 4.19 083/101] dlm: check if workqueues are NULL before flushing/destroying
` [PATCH AUTOSEL 4.19 084/101] powerpc/eeh: Handle hugepages in ioremap space
` [PATCH AUTOSEL 4.19 085/101] s390/dasd: Make layout analysis ESE compatible
` [PATCH AUTOSEL 4.19 086/101] block/bio-integrity: fix a memory leak bug
` [PATCH AUTOSEL 4.19 087/101] sh: prevent warnings when using iounmap
` [PATCH AUTOSEL 4.19 088/101] mm/kmemleak.c: fix check for softirq context
` [PATCH AUTOSEL 4.19 089/101] 9p: pass the correct prototype to read_cache_page
` [PATCH AUTOSEL 4.19 090/101] mm/gup.c: mark undo_dev_pagemap as __maybe_unused
` [PATCH AUTOSEL 4.19 092/101] memcg, fsnotify: no oom-kill for remote memcg charging
` [PATCH AUTOSEL 4.19 095/101] proc: use down_read_killable mmap_sem for /proc/pid/pagemap
` [PATCH AUTOSEL 4.19 096/101] proc: use down_read_killable mmap_sem for /proc/pid/clear_refs
` [PATCH AUTOSEL 4.19 097/101] proc: use down_read_killable mmap_sem for /proc/pid/map_files
` [PATCH AUTOSEL 4.19 099/101] proc: use down_read_killable mmap_sem for /proc/pid/maps
` [PATCH AUTOSEL 4.19 101/101] mm: use down_read_killable for locking mmap_sem in access_remote_vm

[PATCH AUTOSEL 4.14 01/60] drm/panel: simple: Fix panel_simple_dsi_probe
 2019-07-19  4:10 UTC  (40+ messages)
` [PATCH AUTOSEL 4.14 02/60] usb: core: hub: Disable hub-initiated U1/U2
` [PATCH AUTOSEL 4.14 03/60] tty: max310x: Fix invalid baudrate divisors calculator
` [PATCH AUTOSEL 4.14 04/60] pinctrl: rockchip: fix leaked of_node references
` [PATCH AUTOSEL 4.14 05/60] tty: serial: cpm_uart - fix init when SMC is relocated
` [PATCH AUTOSEL 4.14 06/60] drm/edid: Fix a missing-check bug in drm_load_edid_firmware()
` [PATCH AUTOSEL 4.14 09/60] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
` [PATCH AUTOSEL 4.14 10/60] drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry
` [PATCH AUTOSEL 4.14 11/60] memstick: Fix error cleanup path of memstick_init
` [PATCH AUTOSEL 4.14 12/60] tty/serial: digicolor: Fix digicolor-usart already registered warning
` [PATCH AUTOSEL 4.14 13/60] tty: serial: msm_serial: avoid system lockup condition
` [PATCH AUTOSEL 4.14 14/60] serial: 8250: Fix TX interrupt handling condition
` [PATCH AUTOSEL 4.14 15/60] drm/virtio: Add memory barriers for capset cache
` [PATCH AUTOSEL 4.14 18/60] drm/rockchip: Properly adjust to a true clock in adjusted_mode
` [PATCH AUTOSEL 4.14 19/60] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks
` [PATCH AUTOSEL 4.14 20/60] tty: serial_core: Set port active bit in uart_port_activate
` [PATCH AUTOSEL 4.14 21/60] usb: gadget: Zero ffs_io_data
` [PATCH AUTOSEL 4.14 22/60] usb: gadget: storage: Remove warning message
` [PATCH AUTOSEL 4.14 23/60] powerpc/pci/of: Fix OF flags parsing for 64bit BARs
` [PATCH AUTOSEL 4.14 24/60] drm/msm: Depopulate platform on probe failure
` [PATCH AUTOSEL 4.14 25/60] serial: mctrl_gpio: Check if GPIO property exisits before requesting it
` [PATCH AUTOSEL 4.14 26/60] PCI: sysfs: Ignore lockdep for remove attribute
` [PATCH AUTOSEL 4.14 27/60] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
` [PATCH AUTOSEL 4.14 28/60] kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS
` [PATCH AUTOSEL 4.14 29/60] PCI: xilinx-nwl: Fix Multi MSI data programming
` [PATCH AUTOSEL 4.14 30/60] iio: iio-utils: Fix possible incorrect mask calculation
` [PATCH AUTOSEL 4.14 31/60] powerpc/xmon: Fix disabling tracing while in xmon
` [PATCH AUTOSEL 4.14 32/60] recordmcount: Fix spurious mcount entries on powerpc
` [PATCH AUTOSEL 4.14 33/60] mfd: core: Set fwnode for created devices
` [PATCH AUTOSEL 4.14 34/60] mfd: arizona: Fix undefined behavior
` [PATCH AUTOSEL 4.14 36/60] um: Silence lockdep complaint about mmap_sem
` [PATCH AUTOSEL 4.14 37/60] powerpc/4xx/uic: clear pending interrupt after irq type/pol change
` [PATCH AUTOSEL 4.14 38/60] RDMA/i40iw: Set queue pair state when being queried
` [PATCH AUTOSEL 4.14 39/60] serial: sh-sci: Terminate TX DMA during buffer flushing
` [PATCH AUTOSEL 4.14 40/60] serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
` [PATCH AUTOSEL 4.14 41/60] PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
` [PATCH AUTOSEL 4.14 43/60] perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning
` [PATCH AUTOSEL 4.14 45/60] perf annotate: Fix dereferencing freed memory found by the smatch tool
` [PATCH AUTOSEL 4.14 46/60] RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
` [PATCH AUTOSEL 4.14 47/60] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).