messages from 2025-08-04 00:34:32 to 2025-08-04 00:42:55 UTC [more...]
[PATCH AUTOSEL 5.4 01/28] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:42 UTC (12+ messages)
` [PATCH AUTOSEL 5.4 02/28] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 5.4 03/28] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 5.4 04/28] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 5.4 05/28] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 5.4 06/28] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 5.4 07/28] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 5.4 08/28] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 5.4 09/28] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 5.4 10/28] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 5.4 11/28] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 5.4 12/28] ARM: tegra: Use I/O memcpy to write to IRAM
[PATCH AUTOSEL 5.10 01/39] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:40 UTC (39+ messages)
` [PATCH AUTOSEL 5.10 02/39] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 5.10 03/39] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 5.10 04/39] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 5.10 05/39] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 5.10 06/39] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 5.10 07/39] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 5.10 08/39] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 5.10 09/39] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 5.10 10/39] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 5.10 11/39] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 5.10 12/39] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 5.10 13/39] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 5.10 14/39] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 5.10 15/39] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 5.10 16/39] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 5.10 17/39] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 5.10 18/39] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 5.10 19/39] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 5.10 20/39] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 5.10 21/39] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 5.10 22/39] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 5.10 23/39] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 5.10 24/39] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 5.10 25/39] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 5.10 26/39] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 5.10 27/39] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 5.10 28/39] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 5.10 29/39] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 5.10 30/39] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 5.10 31/39] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 5.10 32/39] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 5.10 33/39] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 5.10 34/39] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 5.10 35/39] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 5.10 36/39] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 5.10 37/39] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 5.10 38/39] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 5.10 39/39] ASoC: codecs: rt5640: Retry DEVICE_ID verification
[PATCH AUTOSEL 5.15 01/44] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:38 UTC (44+ messages)
` [PATCH AUTOSEL 5.15 02/44] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 5.15 03/44] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 5.15 04/44] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 5.15 05/44] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 5.15 06/44] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 5.15 07/44] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 5.15 08/44] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 5.15 09/44] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 5.15 10/44] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 5.15 11/44] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 5.15 12/44] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 5.15 13/44] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 5.15 14/44] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 5.15 15/44] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 5.15 16/44] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 5.15 17/44] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 5.15 18/44] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 5.15 19/44] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 5.15 20/44] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 5.15 21/44] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 5.15 22/44] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 5.15 23/44] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 5.15 24/44] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 5.15 25/44] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 5.15 26/44] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 5.15 27/44] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 5.15 28/44] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 5.15 29/44] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 5.15 30/44] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 5.15 31/44] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 5.15 32/44] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 5.15 33/44] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 5.15 34/44] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 5.15 35/44] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 5.15 36/44] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 5.15 37/44] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 5.15 38/44] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 5.15 39/44] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 5.15 40/44] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 5.15 41/44] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 5.15 42/44] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 5.15 43/44] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 5.15 44/44] ASoC: codecs: rt5640: Retry DEVICE_ID verification
[PATCH AUTOSEL 6.1 01/51] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:36 UTC (51+ messages)
` [PATCH AUTOSEL 6.1 02/51] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.1 03/51] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.1 04/51] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.1 05/51] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.1 06/51] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.1 07/51] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.1 08/51] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.1 09/51] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.1 10/51] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.1 11/51] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.1 12/51] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 6.1 13/51] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.1 14/51] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 6.1 15/51] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.1 16/51] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.1 17/51] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.1 18/51] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.1 19/51] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.1 20/51] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.1 21/51] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.1 22/51] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.1 23/51] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.1 24/51] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.1 25/51] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.1 26/51] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.1 27/51] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.1 28/51] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.1 29/51] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.1 30/51] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.1 31/51] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.1 32/51] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.1 33/51] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.1 34/51] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.1 35/51] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.1 36/51] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.1 37/51] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.1 38/51] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.1 39/51] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.1 40/51] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.1 41/51] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.1 42/51] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.1 43/51] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.1 44/51] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.1 45/51] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.1 46/51] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.1 47/51] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.1 48/51] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.1 49/51] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.1 50/51] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.1 51/51] ASoC: codecs: rt5640: Retry DEVICE_ID verification
[PATCH AUTOSEL 6.6 01/59] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:34 UTC (54+ messages)
` [PATCH AUTOSEL 6.6 07/59] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.6 08/59] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.6 09/59] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.6 10/59] soc: qcom: rpmh-rsc: Add RSC version 4 support
` [PATCH AUTOSEL 6.6 11/59] ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
` [PATCH AUTOSEL 6.6 12/59] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.6 13/59] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.6 14/59] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.6 15/59] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 6.6 16/59] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.6 17/59] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 6.6 18/59] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.6 19/59] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.6 20/59] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.6 21/59] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.6 22/59] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.6 23/59] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.6 24/59] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.6 25/59] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.6 26/59] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.6 27/59] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.6 28/59] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.6 29/59] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.6 30/59] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.6 31/59] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.6 32/59] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.6 33/59] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.6 34/59] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.6 35/59] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.6 36/59] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.6 37/59] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.6 38/59] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.6 39/59] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.6 40/59] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.6 41/59] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.6 42/59] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.6 43/59] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.6 44/59] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.6 45/59] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.6 46/59] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.6 47/59] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.6 48/59] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.6 49/59] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.6 50/59] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.6 51/59] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.6 52/59] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.6 53/59] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.6 54/59] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.6 55/59] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.6 56/59] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.6 57/59] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.6 58/59] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.6 59/59] ASoC: qcom: use drvdata instead of component to keep id
[PATCH v4] mm: slub: avoid deref of invalid free pointer in object_err()
2025-08-04 0:35 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox