messages from 2025-08-04 00:29:14 to 2025-08-04 00:37:36 UTC [more...]
[PATCH AUTOSEL 6.1 01/51] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:36 UTC (23+ messages)
` [PATCH AUTOSEL 6.1 02/51] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.1 03/51] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.1 04/51] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.1 05/51] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.1 06/51] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.1 07/51] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.1 08/51] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.1 09/51] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.1 10/51] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.1 11/51] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.1 12/51] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 6.1 13/51] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.1 14/51] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 6.1 15/51] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.1 16/51] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.1 17/51] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.1 18/51] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.1 19/51] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.1 20/51] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.1 21/51] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.1 22/51] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.1 23/51] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
[PATCH AUTOSEL 6.6 01/59] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:34 UTC (59+ messages)
` [PATCH AUTOSEL 6.6 02/59] platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
` [PATCH AUTOSEL 6.6 03/59] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.6 04/59] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.6 05/59] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.6 06/59] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.6 07/59] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.6 08/59] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.6 09/59] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.6 10/59] soc: qcom: rpmh-rsc: Add RSC version 4 support
` [PATCH AUTOSEL 6.6 11/59] ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
` [PATCH AUTOSEL 6.6 12/59] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.6 13/59] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.6 14/59] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.6 15/59] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 6.6 16/59] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.6 17/59] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 6.6 18/59] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.6 19/59] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.6 20/59] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.6 21/59] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.6 22/59] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.6 23/59] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.6 24/59] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.6 25/59] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.6 26/59] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.6 27/59] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.6 28/59] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.6 29/59] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.6 30/59] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.6 31/59] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.6 32/59] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.6 33/59] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.6 34/59] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.6 35/59] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.6 36/59] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.6 37/59] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.6 38/59] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.6 39/59] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.6 40/59] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.6 41/59] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.6 42/59] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.6 43/59] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.6 44/59] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.6 45/59] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.6 46/59] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.6 47/59] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.6 48/59] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.6 49/59] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.6 50/59] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.6 51/59] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.6 52/59] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.6 53/59] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.6 54/59] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.6 55/59] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.6 56/59] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.6 57/59] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.6 58/59] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.6 59/59] ASoC: qcom: use drvdata instead of component to keep id
[PATCH v4] mm: slub: avoid deref of invalid free pointer in object_err()
2025-08-04 0:35 UTC (2+ messages)
[PATCH AUTOSEL 6.12 01/69] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:31 UTC (69+ messages)
` [PATCH AUTOSEL 6.12 02/69] platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
` [PATCH AUTOSEL 6.12 03/69] cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
` [PATCH AUTOSEL 6.12 04/69] selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
` [PATCH AUTOSEL 6.12 05/69] usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
` [PATCH AUTOSEL 6.12 06/69] regulator: core: repeat voltage setting request for stepped regulators
` [PATCH AUTOSEL 6.12 07/69] usb: xhci: Avoid showing warnings for dying controller
` [PATCH AUTOSEL 6.12 08/69] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command
` [PATCH AUTOSEL 6.12 09/69] usb: xhci: Avoid showing errors during surprise removal
` [PATCH AUTOSEL 6.12 10/69] firmware: qcom: scm: initialize tzmem before marking SCM as available
` [PATCH AUTOSEL 6.12 11/69] soc: qcom: rpmh-rsc: Add RSC version 4 support
` [PATCH AUTOSEL 6.12 12/69] ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
` [PATCH AUTOSEL 6.12 13/69] remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
` [PATCH AUTOSEL 6.12 14/69] usb: typec: tcpm/tcpci_maxim: fix irq wake usage
` [PATCH AUTOSEL 6.12 15/69] pmdomain: ti: Select PM_GENERIC_DOMAINS
` [PATCH AUTOSEL 6.12 16/69] gpio: wcd934x: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.12 17/69] cpufreq: Exit governor when failed to start old governor
` [PATCH AUTOSEL 6.12 18/69] cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
` [PATCH AUTOSEL 6.12 19/69] ARM: rockchip: fix kernel hang during smp initialization
` [PATCH AUTOSEL 6.12 20/69] PM / devfreq: governor: Replace sscanf() with kstrtoul() in set_freq_store()
` [PATCH AUTOSEL 6.12 21/69] EDAC/synopsys: Clear the ECC counters on init
` [PATCH AUTOSEL 6.12 22/69] ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
` [PATCH AUTOSEL 6.12 23/69] thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
` [PATCH AUTOSEL 6.12 24/69] tools/nolibc: define time_t in terms of __kernel_old_time_t
` [PATCH AUTOSEL 6.12 25/69] iio: adc: ad_sigma_delta: don't overallocate scan buffer
` [PATCH AUTOSEL 6.12 26/69] gpio: tps65912: check the return value of regmap_update_bits()
` [PATCH AUTOSEL 6.12 27/69] mfd: tps6594: Add TI TPS652G1 support
` [PATCH AUTOSEL 6.12 28/69] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.12 29/69] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.12 30/69] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.12 31/69] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.12 32/69] firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
` [PATCH AUTOSEL 6.12 33/69] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.12 34/69] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.12 35/69] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.12 36/69] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.12 37/69] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.12 38/69] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.12 39/69] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.12 40/69] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.12 41/69] selftests: vDSO: vdso_test_getrandom: Always print TAP header
` [PATCH AUTOSEL 6.12 42/69] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.12 43/69] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.12 44/69] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.12 45/69] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.12 46/69] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.12 47/69] platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
` [PATCH AUTOSEL 6.12 48/69] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.12 49/69] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.12 50/69] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.12 51/69] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.12 52/69] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.12 53/69] ASoC: SOF: topology: Parse the dapm_widget_tokens in case of DSPless mode
` [PATCH AUTOSEL 6.12 54/69] tty: serial: fix print format specifiers
` [PATCH AUTOSEL 6.12 55/69] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.12 56/69] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.12 57/69] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.12 58/69] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.12 59/69] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.12 60/69] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.12 61/69] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.12 62/69] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.12 63/69] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.12 64/69] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.12 65/69] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.12 66/69] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.12 67/69] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.12 68/69] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.12 69/69] ASoC: qcom: use drvdata instead of component to keep id
[PATCH AUTOSEL 6.15 01/80] usb: xhci: print xhci->xhc_state when queue_command failed
2025-08-04 0:27 UTC (49+ messages)
` [PATCH AUTOSEL 6.15 33/80] mfd: tps6594: Add TI TPS652G1 support
` [PATCH AUTOSEL 6.15 34/80] ARM: tegra: Use I/O memcpy to write to IRAM
` [PATCH AUTOSEL 6.15 35/80] tools/build: Fix s390(x) cross-compilation with clang
` [PATCH AUTOSEL 6.15 36/80] selftests: tracing: Use mutex_unlock for testing glob filter
` [PATCH AUTOSEL 6.15 37/80] ACPI: PRM: Reduce unnecessary printing to avoid user confusion
` [PATCH AUTOSEL 6.15 38/80] firmware: arm_scmi: power_control: Ensure SCMI_SYSPOWER_IDLE is set early during resume
` [PATCH AUTOSEL 6.15 39/80] firmware: tegra: Fix IVC dependency problems
` [PATCH AUTOSEL 6.15 40/80] pwm: sifive: Fix PWM algorithm and clarify inverted compare behavior
` [PATCH AUTOSEL 6.15 41/80] ALSA: hda: add MODULE_FIRMWARE for cs35l41/cs35l56
` [PATCH AUTOSEL 6.15 42/80] PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()
` [PATCH AUTOSEL 6.15 43/80] thermal: sysfs: Return ENODATA instead of EAGAIN for reads
` [PATCH AUTOSEL 6.15 44/80] PM: sleep: console: Fix the black screen issue
` [PATCH AUTOSEL 6.15 45/80] ACPI: processor: fix acpi_object initialization
` [PATCH AUTOSEL 6.15 46/80] mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
` [PATCH AUTOSEL 6.15 47/80] ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
` [PATCH AUTOSEL 6.15 48/80] irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
` [PATCH AUTOSEL 6.15 49/80] selftests: vDSO: vdso_test_getrandom: Always print TAP header
` [PATCH AUTOSEL 6.15 50/80] pps: clients: gpio: fix interrupt handling order in remove path
` [PATCH AUTOSEL 6.15 51/80] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
` [PATCH AUTOSEL 6.15 52/80] ASoC: SDCA: Add flag for unused IRQs
` [PATCH AUTOSEL 6.15 53/80] char: misc: Fix improper and inaccurate error code returned by misc_init()
` [PATCH AUTOSEL 6.15 54/80] mei: bus: Check for still connected devices in mei_cl_bus_dev_release()
` [PATCH AUTOSEL 6.15 55/80] mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()
` [PATCH AUTOSEL 6.15 56/80] platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
` [PATCH AUTOSEL 6.15 57/80] ALSA: hda: Handle the jack polling always via a work
` [PATCH AUTOSEL 6.15 58/80] ALSA: hda: Disable jack polling at shutdown
` [PATCH AUTOSEL 6.15 59/80] x86/bugs: Avoid warning when overriding return thunk
` [PATCH AUTOSEL 6.15 60/80] ASoC: hdac_hdmi: Rate limit logging on connection and disconnection
` [PATCH AUTOSEL 6.15 61/80] ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4
` [PATCH AUTOSEL 6.15 62/80] irqchip/mips-gic: Allow forced affinity
` [PATCH AUTOSEL 6.15 63/80] ASoC: SOF: topology: Parse the dapm_widget_tokens in case of DSPless mode
` [PATCH AUTOSEL 6.15 64/80] tty: serial: fix print format specifiers
` [PATCH AUTOSEL 6.15 65/80] ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime()
` [PATCH AUTOSEL 6.15 66/80] usb: typec: intel_pmc_mux: Defer probe if SCU IPC isn't present
` [PATCH AUTOSEL 6.15 67/80] usb: core: usb_submit_urb: downgrade type check
` [PATCH AUTOSEL 6.15 68/80] usb: typec: fusb302: fix scheduling while atomic when using virtio-gpio
` [PATCH AUTOSEL 6.15 69/80] usb: dwc3: xilinx: add shutdown callback
` [PATCH AUTOSEL 6.15 70/80] pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
` [PATCH AUTOSEL 6.15 71/80] imx8m-blk-ctrl: set ISI panic write hurry level
` [PATCH AUTOSEL 6.15 72/80] soc: qcom: mdt_loader: Actually use the e_phoff
` [PATCH AUTOSEL 6.15 73/80] platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches
` [PATCH AUTOSEL 6.15 74/80] platform/chrome: cros_ec_typec: Defer probe on missing EC parent
` [PATCH AUTOSEL 6.15 75/80] ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control
` [PATCH AUTOSEL 6.15 76/80] ALSA: pcm: Rewrite recalculate_boundary() to avoid costly loop
` [PATCH AUTOSEL 6.15 77/80] ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros
` [PATCH AUTOSEL 6.15 78/80] iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement
` [PATCH AUTOSEL 6.15 79/80] ASoC: codecs: rt5640: Retry DEVICE_ID verification
` [PATCH AUTOSEL 6.15 80/80] ASoC: qcom: use drvdata instead of component to keep id
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox