> -----Original Message----- > From: Franz Schnyder > Sent: 2026Äê3ÔÂ25ÈÕ 17:31 > To: Hongxing Zhu ; Lucas Stach > ; Lorenzo Pieralisi ; > Krzysztof Wilczy¨½ski ; Manivannan Sadhasivam > ; Rob Herring ; Bjorn Helgaas > ; Frank Li ; Sascha Hauer > ; Pengutronix Kernel Team > ; Fabio Estevam > Cc: Franz Schnyder ; > linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > imx@lists.linux.dev; linux-kernel@vger.kernel.org; Francesco Dolcini > ; stable@vger.kernel.org > Subject: [PATCH v1] PCI: imx6: Fix reference clock source selection > > From: Franz Schnyder > > In the PCIe PHY init for the iMX95, the reference clock source selection uses > a conditional instead of always passing the mask. This currently breaks > functionality if the internal refclk is used. > > Pass always IMX95_PCIE_REF_USE_PAD as the mask and clear the bit if > external refclk is not used. > > Fixes: d8574ce57d76 ("PCI: imx6: Add external reference clock input mode > support") > Cc: stable@vger.kernel.org > Signed-off-by: Franz Schnyder Apologies, I made an error when organizing the code. This bug was not caught during local testing because the external OSC clock input is permanently enabled on the EVK board. Acked-by: Richard Zhu Best Regards Richard Zhu > --- > drivers/pci/controller/dwc/pci-imx6.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c > b/drivers/pci/controller/dwc/pci-imx6.c > index 81a7093494c8..e0580d6efa57 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -268,8 +268,8 @@ static int imx95_pcie_init_phy(struct imx_pcie > *imx_pcie) > IMX95_PCIE_PHY_CR_PARA_SEL); > > regmap_update_bits(imx_pcie->iomuxc_gpr, > IMX95_PCIE_PHY_GEN_CTRL, > - ext ? IMX95_PCIE_REF_USE_PAD : 0, > - IMX95_PCIE_REF_USE_PAD); > + IMX95_PCIE_REF_USE_PAD, > + ext ? IMX95_PCIE_REF_USE_PAD : 0); > regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0, > IMX95_PCIE_REF_CLKEN, > ext ? 0 : IMX95_PCIE_REF_CLKEN); > -- > 2.43.0