From: "Julian Ruess" <julianr@linux.ibm.com>
To: "Farhan Ali" <alifm@linux.ibm.com>, <linux-s390@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>
Cc: <helgaas@kernel.org>, <lukas@wunner.de>, <alex@shazbot.org>,
<clg@redhat.com>, <stable@vger.kernel.org>,
<schnelle@linux.ibm.com>, <mjrosato@linux.ibm.com>,
<julianr@linux.ibm.com>
Subject: Re: [PATCH v8 9/9] vfio: Remove the pcie check for VFIO_PCI_ERR_IRQ_INDEX
Date: Tue, 27 Jan 2026 09:15:21 +0100 [thread overview]
Message-ID: <DFZ80CU1BHRM.1OALN64S2ULP@linux.ibm.com> (raw)
In-Reply-To: <20260122194437.1903-10-alifm@linux.ibm.com>
On Thu Jan 22, 2026 at 8:44 PM CET, Farhan Ali wrote:
> We are configuring the error signaling on the vast majority of devices and
> it's extremely rare that it fires anyway. This allows userspace to be
> notified on errors for legacy PCI devices. The Internal Shared Memory (ISM)
> device on s390x is one such device. For PCI devices on IBM s390x error
> recovery involves platform firmware and notification to operating system
> is done by architecture specific way. So the ISM device can still be
> recovered when notified of an error.
>
> Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
> ---
> drivers/vfio/pci/vfio_pci_core.c | 8 ++------
> drivers/vfio/pci/vfio_pci_intrs.c | 3 +--
> 2 files changed, 3 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
> index c92c6c512b24..9d44df9e21db 100644
> --- a/drivers/vfio/pci/vfio_pci_core.c
> +++ b/drivers/vfio/pci/vfio_pci_core.c
> @@ -778,8 +778,7 @@ static int vfio_pci_get_irq_count(struct vfio_pci_core_device *vdev, int irq_typ
> return (flags & PCI_MSIX_FLAGS_QSIZE) + 1;
> }
> } else if (irq_type == VFIO_PCI_ERR_IRQ_INDEX) {
> - if (pci_is_pcie(vdev->pdev))
> - return 1;
> + return 1;
> } else if (irq_type == VFIO_PCI_REQ_IRQ_INDEX) {
> return 1;
> }
> @@ -1155,11 +1154,8 @@ static int vfio_pci_ioctl_get_irq_info(struct vfio_pci_core_device *vdev,
> switch (info.index) {
> case VFIO_PCI_INTX_IRQ_INDEX ... VFIO_PCI_MSIX_IRQ_INDEX:
> case VFIO_PCI_REQ_IRQ_INDEX:
> - break;
> case VFIO_PCI_ERR_IRQ_INDEX:
> - if (pci_is_pcie(vdev->pdev))
> - break;
> - fallthrough;
> + break;
> default:
> return -EINVAL;
> }
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index c76e753b3cec..b6cedaf0bcca 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -859,8 +859,7 @@ int vfio_pci_set_irqs_ioctl(struct vfio_pci_core_device *vdev, uint32_t flags,
> case VFIO_PCI_ERR_IRQ_INDEX:
> switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
> case VFIO_IRQ_SET_ACTION_TRIGGER:
> - if (pci_is_pcie(vdev->pdev))
> - func = vfio_pci_set_err_trigger;
> + func = vfio_pci_set_err_trigger;
> break;
> }
> break;
Feel free to add my
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Thanks,
Julian
next prev parent reply other threads:[~2026-01-27 8:15 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-22 19:44 [PATCH v8 0/9] Error recovery for vfio-pci devices on s390x Farhan Ali
2026-01-22 19:44 ` [PATCH v8 1/9] PCI: Allow per function PCI slots Farhan Ali
2026-01-22 19:44 ` [PATCH v8 2/9] s390/pci: Add architecture specific resource/bus address translation Farhan Ali
2026-01-22 19:44 ` [PATCH v8 3/9] PCI: Avoid saving config space state if inaccessible Farhan Ali
2026-01-26 21:00 ` Niklas Schnelle
2026-02-07 0:39 ` Bjorn Helgaas
2026-02-09 18:20 ` Farhan Ali
2026-01-22 19:44 ` [PATCH v8 4/9] PCI: Add additional checks for flr reset Farhan Ali
2026-01-26 13:11 ` Julian Ruess
2026-01-22 19:44 ` [PATCH v8 5/9] s390/pci: Update the logic for detecting passthrough device Farhan Ali
2026-01-22 19:44 ` [PATCH v8 6/9] s390/pci: Store PCI error information for passthrough devices Farhan Ali
2026-01-22 19:44 ` [PATCH v8 7/9] vfio-pci/zdev: Add a device feature for error information Farhan Ali
2026-01-27 10:53 ` Niklas Schnelle
2026-01-27 21:44 ` Farhan Ali
2026-01-22 19:44 ` [PATCH v8 8/9] vfio: Add a reset_done callback for vfio-pci driver Farhan Ali
2026-01-27 11:02 ` Niklas Schnelle
2026-01-22 19:44 ` [PATCH v8 9/9] vfio: Remove the pcie check for VFIO_PCI_ERR_IRQ_INDEX Farhan Ali
2026-01-26 15:31 ` Julian Ruess
2026-01-26 17:38 ` Farhan Ali
2026-01-27 8:15 ` Julian Ruess [this message]
2026-01-27 11:16 ` Niklas Schnelle
2026-02-06 19:03 ` [PATCH v8 0/9] Error recovery for vfio-pci devices on s390x Farhan Ali
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DFZ80CU1BHRM.1OALN64S2ULP@linux.ibm.com \
--to=julianr@linux.ibm.com \
--cc=alex@shazbot.org \
--cc=alifm@linux.ibm.com \
--cc=clg@redhat.com \
--cc=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mjrosato@linux.ibm.com \
--cc=schnelle@linux.ibm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox