From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Marcin Wojtas <mw@semihalf.com>
Cc: Sasha Levin <sashal@kernel.org>,
Antoine Tenart <antoine.tenart@bootlin.com>,
stable@vger.kernel.org, Russell King <rmk+kernel@armlinux.org.uk>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, netdev <netdev@vger.kernel.org>,
Gabor Samu <samu_gabor@yahoo.ca>,
Jon Nettleton <jon@solid-run.com>,
Andrew Elwell <andrew.elwell@gmail.com>
Subject: Re: [PATCH net-next 2/4] net: mvpp2: add mvpp2_phylink_to_port() helper
Date: Wed, 9 Dec 2020 12:00:30 +0100 [thread overview]
Message-ID: <X9CuTjdgD3tDKWwo@kroah.com> (raw)
In-Reply-To: <CAPv3WKed9zhe0q2noGKiKdzd=jBNLtN6vRW0fnQddJhhiD=rkg@mail.gmail.com>
On Tue, Dec 08, 2020 at 04:02:50PM +0100, Marcin Wojtas wrote:
> Hi Sasha,
>
> wt., 8 gru 2020 o 14:35 Sasha Levin <sashal@kernel.org> napisał(a):
> >
> > On Tue, Dec 08, 2020 at 01:03:38PM +0100, Marcin Wojtas wrote:
> > >Hi Greg,
> > >
> > >Apologies for delayed response:.
> > >
> > >
> > >pon., 2 lis 2020 o 19:02 Greg Kroah-Hartman
> > ><gregkh@linuxfoundation.org> napisał(a):
> > >>
> > >> On Mon, Nov 02, 2020 at 06:38:54PM +0100, Marcin Wojtas wrote:
> > >> > Hi Greg and Sasha,
> > >> >
> > >> > pt., 9 paź 2020 o 05:43 Marcin Wojtas <mw@semihalf.com> napisał(a):
> > >> > >
> > >> > > Hi,
> > >> > >
> > >> > > sob., 20 cze 2020 o 11:21 Russell King <rmk+kernel@armlinux.org.uk> napisał(a):
> > >> > > >
> > >> > > > Add a helper to convert the struct phylink_config pointer passed in
> > >> > > > from phylink to the drivers internal struct mvpp2_port.
> > >> > > >
> > >> > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> > >> > > > ---
> > >> > > > .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 29 +++++++++----------
> > >> > > > 1 file changed, 14 insertions(+), 15 deletions(-)
> > >> > > >
> > >> > > > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > >> > > > index 7653277d03b7..313f5a60a605 100644
> > >> > > > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > >> > > > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > >> > > > @@ -4767,12 +4767,16 @@ static void mvpp2_port_copy_mac_addr(struct net_device *dev, struct mvpp2 *priv,
> > >> > > > eth_hw_addr_random(dev);
> > >> > > > }
> > >> > > >
> > >> > > > +static struct mvpp2_port *mvpp2_phylink_to_port(struct phylink_config *config)
> > >> > > > +{
> > >> > > > + return container_of(config, struct mvpp2_port, phylink_config);
> > >> > > > +}
> > >> > > > +
> > >> > > > static void mvpp2_phylink_validate(struct phylink_config *config,
> > >> > > > unsigned long *supported,
> > >> > > > struct phylink_link_state *state)
> > >> > > > {
> > >> > > > - struct mvpp2_port *port = container_of(config, struct mvpp2_port,
> > >> > > > - phylink_config);
> > >> > > > + struct mvpp2_port *port = mvpp2_phylink_to_port(config);
> > >> > > > __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
> > >> > > >
> > >> > > > /* Invalid combinations */
> > >> > > > @@ -4913,8 +4917,7 @@ static void mvpp2_gmac_pcs_get_state(struct mvpp2_port *port,
> > >> > > > static void mvpp2_phylink_mac_pcs_get_state(struct phylink_config *config,
> > >> > > > struct phylink_link_state *state)
> > >> > > > {
> > >> > > > - struct mvpp2_port *port = container_of(config, struct mvpp2_port,
> > >> > > > - phylink_config);
> > >> > > > + struct mvpp2_port *port = mvpp2_phylink_to_port(config);
> > >> > > >
> > >> > > > if (port->priv->hw_version == MVPP22 && port->gop_id == 0) {
> > >> > > > u32 mode = readl(port->base + MVPP22_XLG_CTRL3_REG);
> > >> > > > @@ -4931,8 +4934,7 @@ static void mvpp2_phylink_mac_pcs_get_state(struct phylink_config *config,
> > >> > > >
> > >> > > > static void mvpp2_mac_an_restart(struct phylink_config *config)
> > >> > > > {
> > >> > > > - struct mvpp2_port *port = container_of(config, struct mvpp2_port,
> > >> > > > - phylink_config);
> > >> > > > + struct mvpp2_port *port = mvpp2_phylink_to_port(config);
> > >> > > > u32 val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
> > >> > > >
> > >> > > > writel(val | MVPP2_GMAC_IN_BAND_RESTART_AN,
> > >> > > > @@ -5105,13 +5107,12 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
> > >> > > > static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
> > >> > > > const struct phylink_link_state *state)
> > >> > > > {
> > >> > > > - struct net_device *dev = to_net_dev(config->dev);
> > >> > > > - struct mvpp2_port *port = netdev_priv(dev);
> > >> > > > + struct mvpp2_port *port = mvpp2_phylink_to_port(config);
> > >> > > > bool change_interface = port->phy_interface != state->interface;
> > >> > > >
> > >> > > > /* Check for invalid configuration */
> > >> > > > if (mvpp2_is_xlg(state->interface) && port->gop_id != 0) {
> > >> > > > - netdev_err(dev, "Invalid mode on %s\n", dev->name);
> > >> > > > + netdev_err(port->dev, "Invalid mode on %s\n", port->dev->name);
> > >> > > > return;
> > >> > > > }
> > >> > > >
> > >> > > > @@ -5151,8 +5152,7 @@ static void mvpp2_mac_link_up(struct phylink_config *config,
> > >> > > > int speed, int duplex,
> > >> > > > bool tx_pause, bool rx_pause)
> > >> > > > {
> > >> > > > - struct net_device *dev = to_net_dev(config->dev);
> > >> > > > - struct mvpp2_port *port = netdev_priv(dev);
> > >> > > > + struct mvpp2_port *port = mvpp2_phylink_to_port(config);
> > >> > > > u32 val;
> > >> > > >
> > >> > > > if (mvpp2_is_xlg(interface)) {
> > >> > > > @@ -5199,14 +5199,13 @@ static void mvpp2_mac_link_up(struct phylink_config *config,
> > >> > > >
> > >> > > > mvpp2_egress_enable(port);
> > >> > > > mvpp2_ingress_enable(port);
> > >> > > > - netif_tx_wake_all_queues(dev);
> > >> > > > + netif_tx_wake_all_queues(port->dev);
> > >> > > > }
> > >> > > >
> > >> > > > static void mvpp2_mac_link_down(struct phylink_config *config,
> > >> > > > unsigned int mode, phy_interface_t interface)
> > >> > > > {
> > >> > > > - struct net_device *dev = to_net_dev(config->dev);
> > >> > > > - struct mvpp2_port *port = netdev_priv(dev);
> > >> > > > + struct mvpp2_port *port = mvpp2_phylink_to_port(config);
> > >> > > > u32 val;
> > >> > > >
> > >> > > > if (!phylink_autoneg_inband(mode)) {
> > >> > > > @@ -5223,7 +5222,7 @@ static void mvpp2_mac_link_down(struct phylink_config *config,
> > >> > > > }
> > >> > > > }
> > >> > > >
> > >> > > > - netif_tx_stop_all_queues(dev);
> > >> > > > + netif_tx_stop_all_queues(port->dev);
> > >> > > > mvpp2_egress_disable(port);
> > >> > > > mvpp2_ingress_disable(port);
> > >> > > >
> > >> > > > --
> > >> > > > 2.20.1
> > >> > > >
> > >> > >
> > >> > > This patch fixes a regression that was introduced in v5.3:
> > >> > > Commit 44cc27e43fa3 ("net: phylink: Add struct phylink_config to PHYLINK API")
> > >> > >
> > >> > > Above results in a NULL pointer dereference when booting the
> > >> > > Armada7k8k/CN913x with ACPI between 5.3 and 5.8, which will be
> > >> > > problematic especially for the distros using LTSv5.4 and above (the
> > >> > > issue was reported on Fedora 32).
> > >> > >
> > >> > > Please help with backporting to the stable v5.3+ branches (it applies
> > >> > > smoothly on v5.4/v5.6/v5.8).
> > >> > >
> > >> >
> > >> > Any chances to backport this patch to relevant v5.3+ stable branches?
> > >>
> > >> What patch? What git commit id needs to be backported?
> > >>
> > >
> > >The actual patch is:
> > >Commit 6c2b49eb9671 ("net: mvpp2: add mvpp2_phylink_to_port() helper").
> > >
> > >URL for reference:
> > >https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/net/ethernet/marvell/mvpp2?h=v5.10-rc7&id=6c2b49eb96716e91f202756bfbd3f5fea3b2b172
> > >
> > >Do you think it would be possible to get it merged to v5.3+ stable branches?
> >
> > Could you explain how that patch fixes anything? It reads like a
> > cleanup.
> >
>
> Indeed, I am aware of it, but I'm not sure about the best way to fix
> it. In fact the mentioned patch is an unintentional fix. Commit
> 44cc27e43fa3 ("net: phylink: Add struct phylink_config to PHYLINK
> API") reworked an argument list of mvpp2_mac_config() routine in a way
> that resulted in a NULL pointer dereference when booting the
> Armada7k8k/CN913x with ACPI between 5.3 and 5.8. Part of Russell's
> patch resolves this issue.
What part fixes the issue? I can't see it...
thanks,
greg k-h
next prev parent reply other threads:[~2020-12-09 11:00 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200620092047.GR1551@shell.armlinux.org.uk>
[not found] ` <E1jmZgq-0001UG-1c@rmk-PC.armlinux.org.uk>
2020-10-09 3:43 ` [PATCH net-next 2/4] net: mvpp2: add mvpp2_phylink_to_port() helper Marcin Wojtas
2020-11-02 17:38 ` Marcin Wojtas
2020-11-02 18:03 ` Greg Kroah-Hartman
2020-12-08 12:03 ` Marcin Wojtas
2020-12-08 13:35 ` Sasha Levin
2020-12-08 15:02 ` Marcin Wojtas
2020-12-09 11:00 ` Greg Kroah-Hartman [this message]
2020-12-10 14:35 ` Marcin Wojtas
2020-12-10 15:46 ` Russell King - ARM Linux admin
2020-12-10 17:43 ` Marcin Wojtas
2020-12-10 17:56 ` Russell King - ARM Linux admin
2020-12-10 18:22 ` Marcin Wojtas
2020-12-10 20:26 ` Andrew Lunn
2020-12-10 23:45 ` Marcin Wojtas
2020-12-11 5:03 ` Jon Nettleton
2020-12-11 14:01 ` Andrew Lunn
2020-12-20 17:08 ` Marcin Wojtas
2020-12-21 18:25 ` Jakub Kicinski
2020-12-21 18:30 ` Russell King - ARM Linux admin
2020-12-21 18:47 ` Jakub Kicinski
2020-12-21 19:07 ` Sasha Levin
2020-12-21 21:12 ` Marcin Wojtas
2020-11-02 23:02 ` Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X9CuTjdgD3tDKWwo@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew.elwell@gmail.com \
--cc=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=jon@solid-run.com \
--cc=kuba@kernel.org \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=samu_gabor@yahoo.ca \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).