From: Daniel Golle <daniel@makrotopia.org>
To: stable@vger.kernel.org
Cc: gregkh@linuxfoundation.org, chunkuang.hu@kernel.org, ck.hu@mediatek.com
Subject: [PATCH 6.12.y] drm/mediatek: Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
Date: Tue, 14 Jan 2025 19:24:22 +0000 [thread overview]
Message-ID: <Z4PLxgujddAwrJaR@makrotopia.org> (raw)
In-Reply-To: <2025011258-registrar-obsessed-eb25@gregkh>
Touching DISP_REG_OVL_PITCH_MSB leads to video overlay on MT2701, MT7623N
and probably other older SoCs being broken.
Move setting up AFBC layer configuration into a separate function only
being called on hardware which actually supports AFBC which restores the
behavior as it was before commit c410fa9b07c3 ("drm/mediatek: Add AFBC
support to Mediatek DRM driver") on non-AFBC hardware.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/c7fbd3c3e633c0b7dd6d1cd78ccbdded31e1ca0f.1734397800.git.daniel@makrotopia.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
(cherry picked from commit f8d9b91739e1fb436447c437a346a36deb676a36)
---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 57 +++++++++++++------------
1 file changed, 29 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index e0c0bb01f65a..0e4da239cbeb 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -460,6 +460,29 @@ static unsigned int mtk_ovl_fmt_convert(struct mtk_disp_ovl *ovl,
}
}
+static void mtk_ovl_afbc_layer_config(struct mtk_disp_ovl *ovl,
+ unsigned int idx,
+ struct mtk_plane_pending_state *pending,
+ struct cmdq_pkt *cmdq_pkt)
+{
+ unsigned int pitch_msb = pending->pitch >> 16;
+ unsigned int hdr_pitch = pending->hdr_pitch;
+ unsigned int hdr_addr = pending->hdr_addr;
+
+ if (pending->modifier != DRM_FORMAT_MOD_LINEAR) {
+ mtk_ddp_write_relaxed(cmdq_pkt, hdr_addr, &ovl->cmdq_reg, ovl->regs,
+ DISP_REG_OVL_HDR_ADDR(ovl, idx));
+ mtk_ddp_write_relaxed(cmdq_pkt,
+ OVL_PITCH_MSB_2ND_SUBBUF | pitch_msb,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH_MSB(idx));
+ mtk_ddp_write_relaxed(cmdq_pkt, hdr_pitch, &ovl->cmdq_reg, ovl->regs,
+ DISP_REG_OVL_HDR_PITCH(ovl, idx));
+ } else {
+ mtk_ddp_write_relaxed(cmdq_pkt, pitch_msb,
+ &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH_MSB(idx));
+ }
+}
+
void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
struct mtk_plane_state *state,
struct cmdq_pkt *cmdq_pkt)
@@ -467,25 +490,13 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
struct mtk_disp_ovl *ovl = dev_get_drvdata(dev);
struct mtk_plane_pending_state *pending = &state->pending;
unsigned int addr = pending->addr;
- unsigned int hdr_addr = pending->hdr_addr;
- unsigned int pitch = pending->pitch;
- unsigned int hdr_pitch = pending->hdr_pitch;
+ unsigned int pitch_lsb = pending->pitch & GENMASK(15, 0);
unsigned int fmt = pending->format;
unsigned int offset = (pending->y << 16) | pending->x;
unsigned int src_size = (pending->height << 16) | pending->width;
unsigned int blend_mode = state->base.pixel_blend_mode;
unsigned int ignore_pixel_alpha = 0;
unsigned int con;
- bool is_afbc = pending->modifier != DRM_FORMAT_MOD_LINEAR;
- union overlay_pitch {
- struct split_pitch {
- u16 lsb;
- u16 msb;
- } split_pitch;
- u32 pitch;
- } overlay_pitch;
-
- overlay_pitch.pitch = pitch;
if (!pending->enable) {
mtk_ovl_layer_off(dev, idx, cmdq_pkt);
@@ -524,11 +535,12 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
}
if (ovl->data->supports_afbc)
- mtk_ovl_set_afbc(ovl, cmdq_pkt, idx, is_afbc);
+ mtk_ovl_set_afbc(ovl, cmdq_pkt, idx,
+ pending->modifier != DRM_FORMAT_MOD_LINEAR);
mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_CON(idx));
- mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb | ignore_pixel_alpha,
+ mtk_ddp_write_relaxed(cmdq_pkt, pitch_lsb | ignore_pixel_alpha,
&ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH(idx));
mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_SRC_SIZE(idx));
@@ -537,19 +549,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl->regs,
DISP_REG_OVL_ADDR(ovl, idx));
- if (is_afbc) {
- mtk_ddp_write_relaxed(cmdq_pkt, hdr_addr, &ovl->cmdq_reg, ovl->regs,
- DISP_REG_OVL_HDR_ADDR(ovl, idx));
- mtk_ddp_write_relaxed(cmdq_pkt,
- OVL_PITCH_MSB_2ND_SUBBUF | overlay_pitch.split_pitch.msb,
- &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH_MSB(idx));
- mtk_ddp_write_relaxed(cmdq_pkt, hdr_pitch, &ovl->cmdq_reg, ovl->regs,
- DISP_REG_OVL_HDR_PITCH(ovl, idx));
- } else {
- mtk_ddp_write_relaxed(cmdq_pkt,
- overlay_pitch.split_pitch.msb,
- &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH_MSB(idx));
- }
+ if (ovl->data->supports_afbc)
+ mtk_ovl_afbc_layer_config(ovl, idx, pending, cmdq_pkt);
mtk_ovl_set_bit_depth(dev, idx, fmt, cmdq_pkt);
mtk_ovl_layer_on(dev, idx, cmdq_pkt);
--
2.47.1
prev parent reply other threads:[~2025-01-14 19:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-12 9:14 FAILED: patch "[PATCH] drm/mediatek: Only touch DISP_REG_OVL_PITCH_MSB if AFBC is" failed to apply to 6.12-stable tree gregkh
2025-01-14 19:24 ` Daniel Golle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z4PLxgujddAwrJaR@makrotopia.org \
--to=daniel@makrotopia.org \
--cc=chunkuang.hu@kernel.org \
--cc=ck.hu@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox