Re: [PATCH v3 2/5] ASoC: codecs: wsa883x: lower default PA gain

[Johan Hovold <johan@kernel.org>]

On Fri, Jan 19, 2024 at 07:15:33AM +0000, Srinivas Kandagatla wrote:
> 
> 
> On 18/01/2024 16:58, Johan Hovold wrote:
> > The default PA gain is set to a pretty high level of 15 dB. Initialise
> > the register to the minimum -3 dB level instead.
> > 
> > This is specifically needed to allow machine drivers to use the lowest
> > level as a volume limit.
> > 
> > Cc: stable@vger.kernel.org      # 6.5
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> >   sound/soc/codecs/wsa883x.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
> > index 32983ca9afba..8942c88dee09 100644
> > --- a/sound/soc/codecs/wsa883x.c
> > +++ b/sound/soc/codecs/wsa883x.c
> > @@ -722,7 +722,7 @@ static struct reg_default wsa883x_defaults[] = {
> >   	{ WSA883X_WAVG_PER_6_7, 0x88 },
> >   	{ WSA883X_WAVG_STA, 0x00 },
> >   	{ WSA883X_DRE_CTL_0, 0x70 },
> > -	{ WSA883X_DRE_CTL_1, 0x08 },
> 
> this is hw default value.

Indeed. This was a last minute change when I noticed I could actually
set the lowest limit in the machine driver after I offset it, but then
the reset value was never updated. Didn't think this through.

> > +	{ WSA883X_DRE_CTL_1, 0x1e },
> >   	{ WSA883X_DRE_IDLE_DET_CTL, 0x1F },
> >   	{ WSA883X_CLSH_CTL_0, 0x37 },
> >   	{ WSA883X_CLSH_CTL_1, 0x81 },

Johan