* [PATCH 5.10 000/122] 5.10.211-rc1 review
@ 2024-02-27 13:26 Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 001/122] net/sched: Retire CBQ qdisc Greg Kroah-Hartman
` (127 more replies)
0 siblings, 128 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
This is the start of the stable review cycle for the 5.10.211 release.
There are 122 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.10.211-rc1
Baokun Li <libaokun1@huawei.com>
ext4: regenerate buddy after block freeing failed if under fc replay
Kuniyuki Iwashima <kuniyu@amazon.com>
arp: Prevent overflow in arp_req_get().
Bart Van Assche <bvanassche@acm.org>
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
Michael Schmitz <schmitzmic@gmail.com>
block: ataflop: more blk-mq refactoring fixes
Armin Wolf <W_Armin@gmx.de>
drm/amd/display: Fix memory leak in dm_sw_fini()
Erik Kurzinger <ekurzinger@nvidia.com>
drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
Christian König <christian.koenig@amd.com>
drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3
Florian Westphal <fw@strlen.de>
netfilter: nf_tables: set dormant flag on hook register failure
Sabrina Dubroca <sd@queasysnail.net>
tls: stop recv() if initial process_rx_list gave us non-DATA
Jakub Kicinski <kuba@kernel.org>
tls: rx: drop pointless else after goto
Jakub Kicinski <kuba@kernel.org>
tls: rx: jump to a more appropriate label
Jason Gunthorpe <jgg@ziepe.ca>
s390: use the correct count for __iowrite64_copy()
Kees Cook <keescook@chromium.org>
net: dev: Convert sa_data to flexible array in struct sockaddr
Wolfram Sang <wsa+renesas@sang-engineering.com>
packet: move from strlcpy with unused retval to strscpy
Vasiliy Kovalev <kovalev@altlinux.org>
ipv6: sr: fix possible use-after-free and null-ptr-deref
Daniil Dulov <d.dulov@aladdin.ru>
afs: Increase buffer size in afs_update_volume_status()
Eric Dumazet <edumazet@google.com>
ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid
Eric Dumazet <edumazet@google.com>
ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid
Arnd Bergmann <arnd@arndb.de>
nouveau: fix function cast warnings
Randy Dunlap <rdunlap@infradead.org>
scsi: jazz_esp: Only build if SCSI core is builtin
Gianmarco Lusvardi <glusvardi@posteo.net>
bpf, scripts: Correct GPL license name
Arnd Bergmann <arnd@arndb.de>
RDMA/srpt: fix function pointer cast warnings
Heiko Stuebner <heiko.stuebner@cherry.de>
arm64: dts: rockchip: set num-cs property for spi on px30
Kamal Heib <kheib@redhat.com>
RDMA/qedr: Fix qedr_create_user_qp error flow
Bart Van Assche <bvanassche@acm.org>
RDMA/srpt: Support specifying the srpt_service_guid parameter
Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
RDMA/bnxt_re: Return error for SRQ resize
Zhipeng Lu <alexious@zju.edu.cn>
IB/hfi1: Fix a memleak in init_credit_return
Paolo Abeni <pabeni@redhat.com>
mptcp: fix lockless access in subflow ULP diag
Xu Yang <xu.yang_2@nxp.com>
usb: roles: don't get/set_role() when usb_role_switch is unregistered
Xu Yang <xu.yang_2@nxp.com>
usb: roles: fix NULL pointer issue when put module's reference
Krishna Kurapati <quic_kriskura@quicinc.com>
usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Frank Li <Frank.Li@nxp.com>
usb: cdns3: fix memory double free when handle zero packet
Frank Li <Frank.Li@nxp.com>
usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
Peter Zijlstra <peterz@infradead.org>
x86/alternative: Make custom return thunk unconditional
Borislav Petkov (AMD) <bp@alien8.de>
Revert "x86/alternative: Make custom return thunk unconditional"
Peter Zijlstra <peterz@infradead.org>
x86/returnthunk: Allow different return thunks
Peter Zijlstra <peterz@infradead.org>
x86/ftrace: Use alternative RET encoding
Peter Zijlstra <peterz@infradead.org>
x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
Peter Zijlstra <peterz@infradead.org>
x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBR
Borislav Petkov (AMD) <bp@alien8.de>
Revert "x86/ftrace: Use alternative RET encoding"
Nikita Shubin <nikita.shubin@maquefel.me>
ARM: ep93xx: Add terminator to gpiod_lookup_table
Tom Parkin <tparkin@katalix.com>
l2tp: pass correct message length to ip6_append_data
Vidya Sagar <vidyas@nvidia.com>
PCI/MSI: Prevent MSI hardware interrupt number truncation
Vasiliy Kovalev <kovalev@altlinux.org>
gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
Oliver Upton <oliver.upton@linux.dev>
KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
Oliver Upton <oliver.upton@linux.dev>
KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
Mikulas Patocka <mpatocka@redhat.com>
dm-crypt: don't modify the data when using authenticated encryption
Peter Oberparleiter <oberpar@linux.ibm.com>
s390/cio: fix invalid -EBUSY on ccw_device_start
Daniel Vacek <neelx@redhat.com>
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Gao Xiang <hsiangkao@linux.alibaba.com>
erofs: fix lz4 inplace decompression
Jan Beulich <jbeulich@suse.com>
x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
Zhihao Cheng <chengzhihao1@huawei.com>
jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
Zhang Yi <yi.zhang@huawei.com>
jbd2: recheck chechpointing non-dirty buffer
Zhang Yi <yi.zhang@huawei.com>
jbd2: remove redundant buffer io error checks
Johannes Berg <johannes.berg@intel.com>
iwlwifi: mvm: write queue_sync_state only for sync
Johannes Berg <johannes.berg@intel.com>
iwlwifi: mvm: do more useful queue sync accounting
Max Verevkin <me@maxverevkin.tk>
platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
Sergej Bauer <sbauer@blackbox.su>
lan743x: fix for potential NULL pointer dereference with bare card
Filipe Manana <fdmanana@suse.com>
btrfs: do not pin logs too early during renames
Filipe Manana <fdmanana@suse.com>
btrfs: unify lookup return value when dir entry is missing
Marcos Paulo de Souza <mpdesouza@suse.com>
btrfs: introduce btrfs_lookup_match_dir
Josef Bacik <josef@toxicpanda.com>
btrfs: tree-checker: check for overlapping extent items
Borislav Petkov <bp@suse.de>
task_stack, x86/cea: Force-inline stack helpers
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
ASoC: Intel: boards: get codec device with ACPI instead of bus search
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
ASoC: Intel: boards: harden codec property handling
YouChing Lin <ycllin@mxic.com.tw>
mtd: spinand: macronix: Add support for MX35LFxGE4AD
Shyam Prasad N <sprasad@microsoft.com>
cifs: add a warning when the in-flight count goes negative
Benjamin Gray <bgray@linux.ibm.com>
powerpc/watchpoints: Annotate atomic context in more places
Ravi Bangoria <ravi.bangoria@linux.ibm.com>
powerpc/watchpoint: Workaround P10 DD1 issue with VSX-32 byte instructions
Michael Schmitz <schmitzmic@gmail.com>
block: ataflop: fix breakage introduced at blk-mq refactoring
Kees Cook <keescook@chromium.org>
seccomp: Invalidate seccomp mode to catch death failures
Peter Zijlstra <peterz@infradead.org>
x86/uaccess: Implement macros for CMPXCHG on user addresses
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
hsr: Avoid double remove of a node.
Roger Pau Monne <roger.pau@citrix.com>
hvc/xen: prevent concurrent accesses to the shared ring
Dan Carpenter <error27@gmail.com>
media: av7110: prevent underflow in write_ts_to_decoder()
Shengjiu Wang <shengjiu.wang@nxp.com>
ASoC: fsl_micfil: register platform component before registering cpu dai
Xiaolei Wang <xiaolei.wang@windriver.com>
ARM: dts: imx: Set default tuning step for imx6sx usdhc
Jiaxun Yang <jiaxun.yang@flygoat.com>
irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable
Rafał Miłecki <rafal@milecki.pl>
ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger
Geert Uytterhoeven <geert+renesas@glider.be>
pmdomain: renesas: r8a77980-sysc: CR7 must be always on
Yi Sun <yi.sun@unisoc.com>
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
Takashi Sakamoto <o-takashi@sakamocchi.jp>
firewire: core: send bus reset promptly on gap count error
Hannes Reinecke <hare@suse.de>
scsi: lpfc: Use unsigned type for num_sge
Zhang Rui <rui.zhang@intel.com>
hwmon: (coretemp) Enlarge per package core count limit
Andrew Bresticker <abrestic@rivosinc.com>
efi: Don't add memblocks for soft-reserved memory
Andrew Bresticker <abrestic@rivosinc.com>
efi: runtime: Fix potential overflow of soft-reserved region size
Szilard Fabian <szfabian@bluemarch.art>
Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Zhang Yi <yi.zhang@huawei.com>
ext4: correct the hole length returned by ext4_map_blocks()
Daniel Wagner <dwagner@suse.de>
nvmet-fc: abort command when there is no binding
Daniel Wagner <dwagner@suse.de>
nvmet-fc: release reference on target port
Daniel Wagner <dwagner@suse.de>
nvmet-fcloop: swap the list_add_tail arguments
Daniel Wagner <dwagner@suse.de>
nvme-fc: do not wait in vain when unloading module
Xin Long <lucien.xin@gmail.com>
netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
Wolfram Sang <wsa+renesas@sang-engineering.com>
spi: sh-msiof: avoid integer overflow in constants
Chen-Yu Tsai <wens@csie.org>
ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
Guixin Liu <kanie@linux.alibaba.com>
nvmet-tcp: fix nvme tcp ida memory leak
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
regulator: pwm-regulator: Add validity checks in continuous .get_voltage
Kunwu Chan <chentao@kylinos.cn>
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
Baokun Li <libaokun1@huawei.com>
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
Baokun Li <libaokun1@huawei.com>
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
Lennert Buytenhek <kernel@wantstofly.org>
ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
Conrad Kostecki <conikost@gentoo.org>
ahci: asm1166: correct count of reported ports
Devyn Liu <liudingyuan@huawei.com>
spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
Fullway Wang <fullwaywang@outlook.com>
fbdev: sis: Error out if pixclock equals zero
Fullway Wang <fullwaywang@outlook.com>
fbdev: savage: Error out if pixclock equals zero
Felix Fietkau <nbd@nbd.name>
wifi: mac80211: fix race condition on enabling fast-xmit
Michal Kazior <michal@plume.com>
wifi: cfg80211: fix missing interfaces when dumping
Vinod Koul <vkoul@kernel.org>
dmaengine: fsl-qdma: increase size of 'irq_name'
Vinod Koul <vkoul@kernel.org>
dmaengine: shdma: increase size of 'dev_id'
Dmitry Bogdanov <d.bogdanov@yadro.com>
scsi: target: core: Add TMF to tmr_list handling
Cyril Hrubis <chrubis@suse.cz>
sched/rt: Disallow writing invalid values to sched_rt_period_us
Cyril Hrubis <chrubis@suse.cz>
sched/rt: Fix sysctl_sched_rr_timeslice intial value
Damien Le Moal <dlemoal@kernel.org>
zonefs: Improve error handling
Lokesh Gidra <lokeshgidra@google.com>
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
Cyril Hrubis <chrubis@suse.cz>
sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
Paulo Alcantara <pc@manguebit.com>
smb: client: fix parsing of SMB3.1.1 POSIX create context
Paulo Alcantara <pc@manguebit.com>
smb: client: fix potential OOBs in smb2_parse_contexts()
Paulo Alcantara <pc@manguebit.com>
smb: client: fix OOB in receive_encrypted_standard()
Jamal Hadi Salim <jhs@mojatatu.com>
net/sched: Retire dsmark qdisc
Jamal Hadi Salim <jhs@mojatatu.com>
net/sched: Retire ATM qdisc
Jamal Hadi Salim <jhs@mojatatu.com>
net/sched: Retire CBQ qdisc
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 1 -
arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 2 -
arch/arm/boot/dts/imx6sx.dtsi | 6 +
arch/arm/mach-ep93xx/core.c | 1 +
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +
arch/arm64/kvm/vgic/vgic-its.c | 5 +
arch/powerpc/kernel/hw_breakpoint.c | 76 +-
arch/s390/pci/pci.c | 2 +-
arch/x86/include/asm/cpu_entry_area.h | 2 +-
arch/x86/include/asm/nospec-branch.h | 2 +
arch/x86/include/asm/text-patching.h | 46 +-
arch/x86/include/asm/uaccess.h | 142 ++
arch/x86/kernel/alternative.c | 13 +-
arch/x86/kernel/ftrace.c | 4 +-
arch/x86/kernel/paravirt.c | 22 +-
arch/x86/kernel/static_call.c | 2 +-
arch/x86/net/bpf_jit_comp.c | 2 +-
drivers/ata/ahci.c | 34 +-
drivers/ata/ahci.h | 1 +
drivers/block/ataflop.c | 56 +-
drivers/block/virtio_blk.c | 7 +-
drivers/dma/fsl-qdma.c | 2 +-
drivers/dma/sh/shdma.h | 2 +-
drivers/dma/ti/edma.c | 10 +
drivers/firewire/core-card.c | 18 +-
drivers/firmware/efi/arm-runtime.c | 2 +-
drivers/firmware/efi/efi-init.c | 19 +-
drivers/firmware/efi/riscv-runtime.c | 2 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 +
drivers/gpu/drm/drm_syncobj.c | 16 +-
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c | 8 +-
drivers/hwmon/coretemp.c | 2 +-
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 5 +-
drivers/infiniband/hw/hfi1/pio.c | 6 +-
drivers/infiniband/hw/hfi1/sdma.c | 2 +-
drivers/infiniband/hw/qedr/verbs.c | 11 +-
drivers/infiniband/ulp/srpt/ib_srpt.c | 17 +-
drivers/input/serio/i8042-acpipnpio.h | 8 +
drivers/irqchip/irq-mips-gic.c | 2 +
drivers/md/dm-crypt.c | 6 +
drivers/media/pci/ttpci/av7110_av.c | 4 +-
drivers/mtd/nand/spi/macronix.c | 20 +
drivers/net/ethernet/microchip/lan743x_ethtool.c | 9 +-
drivers/net/gtp.c | 10 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 14 +-
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 10 +-
drivers/nvme/host/fc.c | 47 +-
drivers/nvme/target/fc.c | 11 +-
drivers/nvme/target/fcloop.c | 6 +-
drivers/nvme/target/tcp.c | 1 +
drivers/pci/msi.c | 2 +-
drivers/platform/x86/intel-vbtn.c | 6 +
drivers/regulator/pwm-regulator.c | 3 +
drivers/s390/cio/device_ops.c | 6 +-
drivers/scsi/Kconfig | 2 +-
drivers/scsi/lpfc/lpfc_scsi.c | 12 +-
drivers/soc/renesas/r8a77980-sysc.c | 3 +-
drivers/spi/spi-hisi-sfc-v3xx.c | 5 +
drivers/spi/spi-sh-msiof.c | 16 +-
drivers/target/target_core_device.c | 5 -
drivers/target/target_core_transport.c | 4 +
drivers/tty/hvc/hvc_xen.c | 19 +-
drivers/usb/cdns3/gadget.c | 8 +-
drivers/usb/gadget/function/f_ncm.c | 10 +-
drivers/usb/roles/class.c | 29 +-
drivers/video/fbdev/savage/savagefb_driver.c | 3 +
drivers/video/fbdev/sis/sis_main.c | 2 +
fs/afs/volume.c | 4 +-
fs/aio.c | 9 +-
fs/btrfs/ctree.h | 2 +-
fs/btrfs/dir-item.c | 122 +-
fs/btrfs/inode.c | 48 +-
fs/btrfs/tree-checker.c | 25 +-
fs/btrfs/tree-log.c | 14 +-
fs/cifs/smb2ops.c | 19 +-
fs/cifs/smb2pdu.c | 95 +-
fs/cifs/smb2proto.h | 12 +-
fs/erofs/decompressor.c | 24 +-
fs/ext4/extents.c | 111 +-
fs/ext4/mballoc.c | 33 +-
fs/jbd2/checkpoint.c | 137 +-
fs/zonefs/super.c | 68 +-
include/linux/fs.h | 2 +
include/linux/lockdep.h | 5 +
include/linux/sched/task_stack.h | 2 +-
include/linux/socket.h | 5 +-
include/net/tcp.h | 2 +-
kernel/sched/rt.c | 10 +-
kernel/seccomp.c | 10 +
kernel/sysctl.c | 4 +
mm/userfaultfd.c | 14 +-
net/core/dev.c | 2 +-
net/core/dev_ioctl.c | 2 +-
net/hsr/hsr_framereg.c | 16 +-
net/hsr/hsr_framereg.h | 1 +
net/ipv4/arp.c | 3 +-
net/ipv4/devinet.c | 21 +-
net/ipv6/addrconf.c | 21 +-
net/ipv6/seg6.c | 20 +-
net/l2tp/l2tp_ip6.c | 2 +-
net/mac80211/sta_info.c | 2 +
net/mac80211/tx.c | 2 +-
net/mptcp/diag.c | 6 +-
net/netfilter/nf_conntrack_proto_sctp.c | 2 +-
net/netfilter/nf_tables_api.c | 1 +
net/packet/af_packet.c | 12 +-
net/sched/Kconfig | 42 -
net/sched/Makefile | 3 -
net/sched/sch_atm.c | 709 --------
net/sched/sch_cbq.c | 1816 ---------------------
net/sched/sch_dsmark.c | 521 ------
net/tls/tls_main.c | 2 +-
net/tls/tls_sw.c | 12 +-
net/wireless/nl80211.c | 1 +
scripts/bpf_helpers_doc.py | 2 +-
sound/soc/fsl/fsl_micfil.c | 15 +-
sound/soc/intel/boards/bytcht_es8316.c | 14 +-
sound/soc/intel/boards/bytcr_rt5640.c | 46 +-
sound/soc/intel/boards/bytcr_rt5651.c | 41 +-
sound/soc/sunxi/sun4i-spdif.c | 5 +
123 files changed, 1267 insertions(+), 3694 deletions(-)
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 001/122] net/sched: Retire CBQ qdisc
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 002/122] net/sched: Retire ATM qdisc Greg Kroah-Hartman
` (126 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jamal Hadi Salim, Jiri Pirko,
Paolo Abeni
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jamal Hadi Salim <jhs@mojatatu.com>
commit 051d442098421c28c7951625652f61b1e15c4bd5 upstream.
While this amazing qdisc has served us well over the years it has not been
getting any tender love and care and has bitrotted over time.
It has become mostly a shooting target for syzkaller lately.
For this reason, we are retiring it. Goodbye CBQ - we loved you.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/Kconfig | 17
net/sched/Makefile | 1
net/sched/sch_cbq.c | 1816 ----------------------------------------------------
3 files changed, 1834 deletions(-)
delete mode 100644 net/sched/sch_cbq.c
delete mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/cbq.json
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -45,23 +45,6 @@ if NET_SCHED
comment "Queueing/Scheduling"
-config NET_SCH_CBQ
- tristate "Class Based Queueing (CBQ)"
- help
- Say Y here if you want to use the Class-Based Queueing (CBQ) packet
- scheduling algorithm. This algorithm classifies the waiting packets
- into a tree-like hierarchy of classes; the leaves of this tree are
- in turn scheduled by separate algorithms.
-
- See the top of <file:net/sched/sch_cbq.c> for more details.
-
- CBQ is a commonly used scheduler, so if you're unsure, you should
- say Y here. Then say Y to all the queueing algorithms below that you
- want to use as leaf disciplines.
-
- To compile this code as a module, choose M here: the
- module will be called sch_cbq.
-
config NET_SCH_HTB
tristate "Hierarchical Token Bucket (HTB)"
help
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_NET_ACT_TUNNEL_KEY)+= act_t
obj-$(CONFIG_NET_ACT_CT) += act_ct.o
obj-$(CONFIG_NET_ACT_GATE) += act_gate.o
obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
-obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o
obj-$(CONFIG_NET_SCH_HFSC) += sch_hfsc.o
obj-$(CONFIG_NET_SCH_RED) += sch_red.o
--- a/net/sched/sch_cbq.c
+++ /dev/null
@@ -1,1816 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * net/sched/sch_cbq.c Class-Based Queueing discipline.
- *
- * Authors: Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/skbuff.h>
-#include <net/netlink.h>
-#include <net/pkt_sched.h>
-#include <net/pkt_cls.h>
-
-
-/* Class-Based Queueing (CBQ) algorithm.
- =======================================
-
- Sources: [1] Sally Floyd and Van Jacobson, "Link-sharing and Resource
- Management Models for Packet Networks",
- IEEE/ACM Transactions on Networking, Vol.3, No.4, 1995
-
- [2] Sally Floyd, "Notes on CBQ and Guaranteed Service", 1995
-
- [3] Sally Floyd, "Notes on Class-Based Queueing: Setting
- Parameters", 1996
-
- [4] Sally Floyd and Michael Speer, "Experimental Results
- for Class-Based Queueing", 1998, not published.
-
- -----------------------------------------------------------------------
-
- Algorithm skeleton was taken from NS simulator cbq.cc.
- If someone wants to check this code against the LBL version,
- he should take into account that ONLY the skeleton was borrowed,
- the implementation is different. Particularly:
-
- --- The WRR algorithm is different. Our version looks more
- reasonable (I hope) and works when quanta are allowed to be
- less than MTU, which is always the case when real time classes
- have small rates. Note, that the statement of [3] is
- incomplete, delay may actually be estimated even if class
- per-round allotment is less than MTU. Namely, if per-round
- allotment is W*r_i, and r_1+...+r_k = r < 1
-
- delay_i <= ([MTU/(W*r_i)]*W*r + W*r + k*MTU)/B
-
- In the worst case we have IntServ estimate with D = W*r+k*MTU
- and C = MTU*r. The proof (if correct at all) is trivial.
-
-
- --- It seems that cbq-2.0 is not very accurate. At least, I cannot
- interpret some places, which look like wrong translations
- from NS. Anyone is advised to find these differences
- and explain to me, why I am wrong 8).
-
- --- Linux has no EOI event, so that we cannot estimate true class
- idle time. Workaround is to consider the next dequeue event
- as sign that previous packet is finished. This is wrong because of
- internal device queueing, but on a permanently loaded link it is true.
- Moreover, combined with clock integrator, this scheme looks
- very close to an ideal solution. */
-
-struct cbq_sched_data;
-
-
-struct cbq_class {
- struct Qdisc_class_common common;
- struct cbq_class *next_alive; /* next class with backlog in this priority band */
-
-/* Parameters */
- unsigned char priority; /* class priority */
- unsigned char priority2; /* priority to be used after overlimit */
- unsigned char ewma_log; /* time constant for idle time calculation */
-
- u32 defmap;
-
- /* Link-sharing scheduler parameters */
- long maxidle; /* Class parameters: see below. */
- long offtime;
- long minidle;
- u32 avpkt;
- struct qdisc_rate_table *R_tab;
-
- /* General scheduler (WRR) parameters */
- long allot;
- long quantum; /* Allotment per WRR round */
- long weight; /* Relative allotment: see below */
-
- struct Qdisc *qdisc; /* Ptr to CBQ discipline */
- struct cbq_class *split; /* Ptr to split node */
- struct cbq_class *share; /* Ptr to LS parent in the class tree */
- struct cbq_class *tparent; /* Ptr to tree parent in the class tree */
- struct cbq_class *borrow; /* NULL if class is bandwidth limited;
- parent otherwise */
- struct cbq_class *sibling; /* Sibling chain */
- struct cbq_class *children; /* Pointer to children chain */
-
- struct Qdisc *q; /* Elementary queueing discipline */
-
-
-/* Variables */
- unsigned char cpriority; /* Effective priority */
- unsigned char delayed;
- unsigned char level; /* level of the class in hierarchy:
- 0 for leaf classes, and maximal
- level of children + 1 for nodes.
- */
-
- psched_time_t last; /* Last end of service */
- psched_time_t undertime;
- long avgidle;
- long deficit; /* Saved deficit for WRR */
- psched_time_t penalized;
- struct gnet_stats_basic_packed bstats;
- struct gnet_stats_queue qstats;
- struct net_rate_estimator __rcu *rate_est;
- struct tc_cbq_xstats xstats;
-
- struct tcf_proto __rcu *filter_list;
- struct tcf_block *block;
-
- int filters;
-
- struct cbq_class *defaults[TC_PRIO_MAX + 1];
-};
-
-struct cbq_sched_data {
- struct Qdisc_class_hash clhash; /* Hash table of all classes */
- int nclasses[TC_CBQ_MAXPRIO + 1];
- unsigned int quanta[TC_CBQ_MAXPRIO + 1];
-
- struct cbq_class link;
-
- unsigned int activemask;
- struct cbq_class *active[TC_CBQ_MAXPRIO + 1]; /* List of all classes
- with backlog */
-
-#ifdef CONFIG_NET_CLS_ACT
- struct cbq_class *rx_class;
-#endif
- struct cbq_class *tx_class;
- struct cbq_class *tx_borrowed;
- int tx_len;
- psched_time_t now; /* Cached timestamp */
- unsigned int pmask;
-
- struct hrtimer delay_timer;
- struct qdisc_watchdog watchdog; /* Watchdog timer,
- started when CBQ has
- backlog, but cannot
- transmit just now */
- psched_tdiff_t wd_expires;
- int toplevel;
- u32 hgenerator;
-};
-
-
-#define L2T(cl, len) qdisc_l2t((cl)->R_tab, len)
-
-static inline struct cbq_class *
-cbq_class_lookup(struct cbq_sched_data *q, u32 classid)
-{
- struct Qdisc_class_common *clc;
-
- clc = qdisc_class_find(&q->clhash, classid);
- if (clc == NULL)
- return NULL;
- return container_of(clc, struct cbq_class, common);
-}
-
-#ifdef CONFIG_NET_CLS_ACT
-
-static struct cbq_class *
-cbq_reclassify(struct sk_buff *skb, struct cbq_class *this)
-{
- struct cbq_class *cl;
-
- for (cl = this->tparent; cl; cl = cl->tparent) {
- struct cbq_class *new = cl->defaults[TC_PRIO_BESTEFFORT];
-
- if (new != NULL && new != this)
- return new;
- }
- return NULL;
-}
-
-#endif
-
-/* Classify packet. The procedure is pretty complicated, but
- * it allows us to combine link sharing and priority scheduling
- * transparently.
- *
- * Namely, you can put link sharing rules (f.e. route based) at root of CBQ,
- * so that it resolves to split nodes. Then packets are classified
- * by logical priority, or a more specific classifier may be attached
- * to the split node.
- */
-
-static struct cbq_class *
-cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *head = &q->link;
- struct cbq_class **defmap;
- struct cbq_class *cl = NULL;
- u32 prio = skb->priority;
- struct tcf_proto *fl;
- struct tcf_result res;
-
- /*
- * Step 1. If skb->priority points to one of our classes, use it.
- */
- if (TC_H_MAJ(prio ^ sch->handle) == 0 &&
- (cl = cbq_class_lookup(q, prio)) != NULL)
- return cl;
-
- *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
- for (;;) {
- int result = 0;
- defmap = head->defaults;
-
- fl = rcu_dereference_bh(head->filter_list);
- /*
- * Step 2+n. Apply classifier.
- */
- result = tcf_classify(skb, fl, &res, true);
- if (!fl || result < 0)
- goto fallback;
- if (result == TC_ACT_SHOT)
- return NULL;
-
- cl = (void *)res.class;
- if (!cl) {
- if (TC_H_MAJ(res.classid))
- cl = cbq_class_lookup(q, res.classid);
- else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL)
- cl = defmap[TC_PRIO_BESTEFFORT];
-
- if (cl == NULL)
- goto fallback;
- }
- if (cl->level >= head->level)
- goto fallback;
-#ifdef CONFIG_NET_CLS_ACT
- switch (result) {
- case TC_ACT_QUEUED:
- case TC_ACT_STOLEN:
- case TC_ACT_TRAP:
- *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
- fallthrough;
- case TC_ACT_RECLASSIFY:
- return cbq_reclassify(skb, cl);
- }
-#endif
- if (cl->level == 0)
- return cl;
-
- /*
- * Step 3+n. If classifier selected a link sharing class,
- * apply agency specific classifier.
- * Repeat this procdure until we hit a leaf node.
- */
- head = cl;
- }
-
-fallback:
- cl = head;
-
- /*
- * Step 4. No success...
- */
- if (TC_H_MAJ(prio) == 0 &&
- !(cl = head->defaults[prio & TC_PRIO_MAX]) &&
- !(cl = head->defaults[TC_PRIO_BESTEFFORT]))
- return head;
-
- return cl;
-}
-
-/*
- * A packet has just been enqueued on the empty class.
- * cbq_activate_class adds it to the tail of active class list
- * of its priority band.
- */
-
-static inline void cbq_activate_class(struct cbq_class *cl)
-{
- struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
- int prio = cl->cpriority;
- struct cbq_class *cl_tail;
-
- cl_tail = q->active[prio];
- q->active[prio] = cl;
-
- if (cl_tail != NULL) {
- cl->next_alive = cl_tail->next_alive;
- cl_tail->next_alive = cl;
- } else {
- cl->next_alive = cl;
- q->activemask |= (1<<prio);
- }
-}
-
-/*
- * Unlink class from active chain.
- * Note that this same procedure is done directly in cbq_dequeue*
- * during round-robin procedure.
- */
-
-static void cbq_deactivate_class(struct cbq_class *this)
-{
- struct cbq_sched_data *q = qdisc_priv(this->qdisc);
- int prio = this->cpriority;
- struct cbq_class *cl;
- struct cbq_class *cl_prev = q->active[prio];
-
- do {
- cl = cl_prev->next_alive;
- if (cl == this) {
- cl_prev->next_alive = cl->next_alive;
- cl->next_alive = NULL;
-
- if (cl == q->active[prio]) {
- q->active[prio] = cl_prev;
- if (cl == q->active[prio]) {
- q->active[prio] = NULL;
- q->activemask &= ~(1<<prio);
- return;
- }
- }
- return;
- }
- } while ((cl_prev = cl) != q->active[prio]);
-}
-
-static void
-cbq_mark_toplevel(struct cbq_sched_data *q, struct cbq_class *cl)
-{
- int toplevel = q->toplevel;
-
- if (toplevel > cl->level) {
- psched_time_t now = psched_get_time();
-
- do {
- if (cl->undertime < now) {
- q->toplevel = cl->level;
- return;
- }
- } while ((cl = cl->borrow) != NULL && toplevel > cl->level);
- }
-}
-
-static int
-cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
- struct sk_buff **to_free)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- int ret;
- struct cbq_class *cl = cbq_classify(skb, sch, &ret);
-
-#ifdef CONFIG_NET_CLS_ACT
- q->rx_class = cl;
-#endif
- if (cl == NULL) {
- if (ret & __NET_XMIT_BYPASS)
- qdisc_qstats_drop(sch);
- __qdisc_drop(skb, to_free);
- return ret;
- }
-
- ret = qdisc_enqueue(skb, cl->q, to_free);
- if (ret == NET_XMIT_SUCCESS) {
- sch->q.qlen++;
- cbq_mark_toplevel(q, cl);
- if (!cl->next_alive)
- cbq_activate_class(cl);
- return ret;
- }
-
- if (net_xmit_drop_count(ret)) {
- qdisc_qstats_drop(sch);
- cbq_mark_toplevel(q, cl);
- cl->qstats.drops++;
- }
- return ret;
-}
-
-/* Overlimit action: penalize leaf class by adding offtime */
-static void cbq_overlimit(struct cbq_class *cl)
-{
- struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
- psched_tdiff_t delay = cl->undertime - q->now;
-
- if (!cl->delayed) {
- delay += cl->offtime;
-
- /*
- * Class goes to sleep, so that it will have no
- * chance to work avgidle. Let's forgive it 8)
- *
- * BTW cbq-2.0 has a crap in this
- * place, apparently they forgot to shift it by cl->ewma_log.
- */
- if (cl->avgidle < 0)
- delay -= (-cl->avgidle) - ((-cl->avgidle) >> cl->ewma_log);
- if (cl->avgidle < cl->minidle)
- cl->avgidle = cl->minidle;
- if (delay <= 0)
- delay = 1;
- cl->undertime = q->now + delay;
-
- cl->xstats.overactions++;
- cl->delayed = 1;
- }
- if (q->wd_expires == 0 || q->wd_expires > delay)
- q->wd_expires = delay;
-
- /* Dirty work! We must schedule wakeups based on
- * real available rate, rather than leaf rate,
- * which may be tiny (even zero).
- */
- if (q->toplevel == TC_CBQ_MAXLEVEL) {
- struct cbq_class *b;
- psched_tdiff_t base_delay = q->wd_expires;
-
- for (b = cl->borrow; b; b = b->borrow) {
- delay = b->undertime - q->now;
- if (delay < base_delay) {
- if (delay <= 0)
- delay = 1;
- base_delay = delay;
- }
- }
-
- q->wd_expires = base_delay;
- }
-}
-
-static psched_tdiff_t cbq_undelay_prio(struct cbq_sched_data *q, int prio,
- psched_time_t now)
-{
- struct cbq_class *cl;
- struct cbq_class *cl_prev = q->active[prio];
- psched_time_t sched = now;
-
- if (cl_prev == NULL)
- return 0;
-
- do {
- cl = cl_prev->next_alive;
- if (now - cl->penalized > 0) {
- cl_prev->next_alive = cl->next_alive;
- cl->next_alive = NULL;
- cl->cpriority = cl->priority;
- cl->delayed = 0;
- cbq_activate_class(cl);
-
- if (cl == q->active[prio]) {
- q->active[prio] = cl_prev;
- if (cl == q->active[prio]) {
- q->active[prio] = NULL;
- return 0;
- }
- }
-
- cl = cl_prev->next_alive;
- } else if (sched - cl->penalized > 0)
- sched = cl->penalized;
- } while ((cl_prev = cl) != q->active[prio]);
-
- return sched - now;
-}
-
-static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
-{
- struct cbq_sched_data *q = container_of(timer, struct cbq_sched_data,
- delay_timer);
- struct Qdisc *sch = q->watchdog.qdisc;
- psched_time_t now;
- psched_tdiff_t delay = 0;
- unsigned int pmask;
-
- now = psched_get_time();
-
- pmask = q->pmask;
- q->pmask = 0;
-
- while (pmask) {
- int prio = ffz(~pmask);
- psched_tdiff_t tmp;
-
- pmask &= ~(1<<prio);
-
- tmp = cbq_undelay_prio(q, prio, now);
- if (tmp > 0) {
- q->pmask |= 1<<prio;
- if (tmp < delay || delay == 0)
- delay = tmp;
- }
- }
-
- if (delay) {
- ktime_t time;
-
- time = 0;
- time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay));
- hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS_PINNED);
- }
-
- __netif_schedule(qdisc_root(sch));
- return HRTIMER_NORESTART;
-}
-
-/*
- * It is mission critical procedure.
- *
- * We "regenerate" toplevel cutoff, if transmitting class
- * has backlog and it is not regulated. It is not part of
- * original CBQ description, but looks more reasonable.
- * Probably, it is wrong. This question needs further investigation.
- */
-
-static inline void
-cbq_update_toplevel(struct cbq_sched_data *q, struct cbq_class *cl,
- struct cbq_class *borrowed)
-{
- if (cl && q->toplevel >= borrowed->level) {
- if (cl->q->q.qlen > 1) {
- do {
- if (borrowed->undertime == PSCHED_PASTPERFECT) {
- q->toplevel = borrowed->level;
- return;
- }
- } while ((borrowed = borrowed->borrow) != NULL);
- }
-#if 0
- /* It is not necessary now. Uncommenting it
- will save CPU cycles, but decrease fairness.
- */
- q->toplevel = TC_CBQ_MAXLEVEL;
-#endif
- }
-}
-
-static void
-cbq_update(struct cbq_sched_data *q)
-{
- struct cbq_class *this = q->tx_class;
- struct cbq_class *cl = this;
- int len = q->tx_len;
- psched_time_t now;
-
- q->tx_class = NULL;
- /* Time integrator. We calculate EOS time
- * by adding expected packet transmission time.
- */
- now = q->now + L2T(&q->link, len);
-
- for ( ; cl; cl = cl->share) {
- long avgidle = cl->avgidle;
- long idle;
-
- cl->bstats.packets++;
- cl->bstats.bytes += len;
-
- /*
- * (now - last) is total time between packet right edges.
- * (last_pktlen/rate) is "virtual" busy time, so that
- *
- * idle = (now - last) - last_pktlen/rate
- */
-
- idle = now - cl->last;
- if ((unsigned long)idle > 128*1024*1024) {
- avgidle = cl->maxidle;
- } else {
- idle -= L2T(cl, len);
-
- /* true_avgidle := (1-W)*true_avgidle + W*idle,
- * where W=2^{-ewma_log}. But cl->avgidle is scaled:
- * cl->avgidle == true_avgidle/W,
- * hence:
- */
- avgidle += idle - (avgidle>>cl->ewma_log);
- }
-
- if (avgidle <= 0) {
- /* Overlimit or at-limit */
-
- if (avgidle < cl->minidle)
- avgidle = cl->minidle;
-
- cl->avgidle = avgidle;
-
- /* Calculate expected time, when this class
- * will be allowed to send.
- * It will occur, when:
- * (1-W)*true_avgidle + W*delay = 0, i.e.
- * idle = (1/W - 1)*(-true_avgidle)
- * or
- * idle = (1 - W)*(-cl->avgidle);
- */
- idle = (-avgidle) - ((-avgidle) >> cl->ewma_log);
-
- /*
- * That is not all.
- * To maintain the rate allocated to the class,
- * we add to undertime virtual clock,
- * necessary to complete transmitted packet.
- * (len/phys_bandwidth has been already passed
- * to the moment of cbq_update)
- */
-
- idle -= L2T(&q->link, len);
- idle += L2T(cl, len);
-
- cl->undertime = now + idle;
- } else {
- /* Underlimit */
-
- cl->undertime = PSCHED_PASTPERFECT;
- if (avgidle > cl->maxidle)
- cl->avgidle = cl->maxidle;
- else
- cl->avgidle = avgidle;
- }
- if ((s64)(now - cl->last) > 0)
- cl->last = now;
- }
-
- cbq_update_toplevel(q, this, q->tx_borrowed);
-}
-
-static inline struct cbq_class *
-cbq_under_limit(struct cbq_class *cl)
-{
- struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
- struct cbq_class *this_cl = cl;
-
- if (cl->tparent == NULL)
- return cl;
-
- if (cl->undertime == PSCHED_PASTPERFECT || q->now >= cl->undertime) {
- cl->delayed = 0;
- return cl;
- }
-
- do {
- /* It is very suspicious place. Now overlimit
- * action is generated for not bounded classes
- * only if link is completely congested.
- * Though it is in agree with ancestor-only paradigm,
- * it looks very stupid. Particularly,
- * it means that this chunk of code will either
- * never be called or result in strong amplification
- * of burstiness. Dangerous, silly, and, however,
- * no another solution exists.
- */
- cl = cl->borrow;
- if (!cl) {
- this_cl->qstats.overlimits++;
- cbq_overlimit(this_cl);
- return NULL;
- }
- if (cl->level > q->toplevel)
- return NULL;
- } while (cl->undertime != PSCHED_PASTPERFECT && q->now < cl->undertime);
-
- cl->delayed = 0;
- return cl;
-}
-
-static inline struct sk_buff *
-cbq_dequeue_prio(struct Qdisc *sch, int prio)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl_tail, *cl_prev, *cl;
- struct sk_buff *skb;
- int deficit;
-
- cl_tail = cl_prev = q->active[prio];
- cl = cl_prev->next_alive;
-
- do {
- deficit = 0;
-
- /* Start round */
- do {
- struct cbq_class *borrow = cl;
-
- if (cl->q->q.qlen &&
- (borrow = cbq_under_limit(cl)) == NULL)
- goto skip_class;
-
- if (cl->deficit <= 0) {
- /* Class exhausted its allotment per
- * this round. Switch to the next one.
- */
- deficit = 1;
- cl->deficit += cl->quantum;
- goto next_class;
- }
-
- skb = cl->q->dequeue(cl->q);
-
- /* Class did not give us any skb :-(
- * It could occur even if cl->q->q.qlen != 0
- * f.e. if cl->q == "tbf"
- */
- if (skb == NULL)
- goto skip_class;
-
- cl->deficit -= qdisc_pkt_len(skb);
- q->tx_class = cl;
- q->tx_borrowed = borrow;
- if (borrow != cl) {
-#ifndef CBQ_XSTATS_BORROWS_BYTES
- borrow->xstats.borrows++;
- cl->xstats.borrows++;
-#else
- borrow->xstats.borrows += qdisc_pkt_len(skb);
- cl->xstats.borrows += qdisc_pkt_len(skb);
-#endif
- }
- q->tx_len = qdisc_pkt_len(skb);
-
- if (cl->deficit <= 0) {
- q->active[prio] = cl;
- cl = cl->next_alive;
- cl->deficit += cl->quantum;
- }
- return skb;
-
-skip_class:
- if (cl->q->q.qlen == 0 || prio != cl->cpriority) {
- /* Class is empty or penalized.
- * Unlink it from active chain.
- */
- cl_prev->next_alive = cl->next_alive;
- cl->next_alive = NULL;
-
- /* Did cl_tail point to it? */
- if (cl == cl_tail) {
- /* Repair it! */
- cl_tail = cl_prev;
-
- /* Was it the last class in this band? */
- if (cl == cl_tail) {
- /* Kill the band! */
- q->active[prio] = NULL;
- q->activemask &= ~(1<<prio);
- if (cl->q->q.qlen)
- cbq_activate_class(cl);
- return NULL;
- }
-
- q->active[prio] = cl_tail;
- }
- if (cl->q->q.qlen)
- cbq_activate_class(cl);
-
- cl = cl_prev;
- }
-
-next_class:
- cl_prev = cl;
- cl = cl->next_alive;
- } while (cl_prev != cl_tail);
- } while (deficit);
-
- q->active[prio] = cl_prev;
-
- return NULL;
-}
-
-static inline struct sk_buff *
-cbq_dequeue_1(struct Qdisc *sch)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct sk_buff *skb;
- unsigned int activemask;
-
- activemask = q->activemask & 0xFF;
- while (activemask) {
- int prio = ffz(~activemask);
- activemask &= ~(1<<prio);
- skb = cbq_dequeue_prio(sch, prio);
- if (skb)
- return skb;
- }
- return NULL;
-}
-
-static struct sk_buff *
-cbq_dequeue(struct Qdisc *sch)
-{
- struct sk_buff *skb;
- struct cbq_sched_data *q = qdisc_priv(sch);
- psched_time_t now;
-
- now = psched_get_time();
-
- if (q->tx_class)
- cbq_update(q);
-
- q->now = now;
-
- for (;;) {
- q->wd_expires = 0;
-
- skb = cbq_dequeue_1(sch);
- if (skb) {
- qdisc_bstats_update(sch, skb);
- sch->q.qlen--;
- return skb;
- }
-
- /* All the classes are overlimit.
- *
- * It is possible, if:
- *
- * 1. Scheduler is empty.
- * 2. Toplevel cutoff inhibited borrowing.
- * 3. Root class is overlimit.
- *
- * Reset 2d and 3d conditions and retry.
- *
- * Note, that NS and cbq-2.0 are buggy, peeking
- * an arbitrary class is appropriate for ancestor-only
- * sharing, but not for toplevel algorithm.
- *
- * Our version is better, but slower, because it requires
- * two passes, but it is unavoidable with top-level sharing.
- */
-
- if (q->toplevel == TC_CBQ_MAXLEVEL &&
- q->link.undertime == PSCHED_PASTPERFECT)
- break;
-
- q->toplevel = TC_CBQ_MAXLEVEL;
- q->link.undertime = PSCHED_PASTPERFECT;
- }
-
- /* No packets in scheduler or nobody wants to give them to us :-(
- * Sigh... start watchdog timer in the last case.
- */
-
- if (sch->q.qlen) {
- qdisc_qstats_overlimit(sch);
- if (q->wd_expires)
- qdisc_watchdog_schedule(&q->watchdog,
- now + q->wd_expires);
- }
- return NULL;
-}
-
-/* CBQ class maintanance routines */
-
-static void cbq_adjust_levels(struct cbq_class *this)
-{
- if (this == NULL)
- return;
-
- do {
- int level = 0;
- struct cbq_class *cl;
-
- cl = this->children;
- if (cl) {
- do {
- if (cl->level > level)
- level = cl->level;
- } while ((cl = cl->sibling) != this->children);
- }
- this->level = level + 1;
- } while ((this = this->tparent) != NULL);
-}
-
-static void cbq_normalize_quanta(struct cbq_sched_data *q, int prio)
-{
- struct cbq_class *cl;
- unsigned int h;
-
- if (q->quanta[prio] == 0)
- return;
-
- for (h = 0; h < q->clhash.hashsize; h++) {
- hlist_for_each_entry(cl, &q->clhash.hash[h], common.hnode) {
- /* BUGGGG... Beware! This expression suffer of
- * arithmetic overflows!
- */
- if (cl->priority == prio) {
- cl->quantum = (cl->weight*cl->allot*q->nclasses[prio])/
- q->quanta[prio];
- }
- if (cl->quantum <= 0 ||
- cl->quantum > 32*qdisc_dev(cl->qdisc)->mtu) {
- pr_warn("CBQ: class %08x has bad quantum==%ld, repaired.\n",
- cl->common.classid, cl->quantum);
- cl->quantum = qdisc_dev(cl->qdisc)->mtu/2 + 1;
- }
- }
- }
-}
-
-static void cbq_sync_defmap(struct cbq_class *cl)
-{
- struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
- struct cbq_class *split = cl->split;
- unsigned int h;
- int i;
-
- if (split == NULL)
- return;
-
- for (i = 0; i <= TC_PRIO_MAX; i++) {
- if (split->defaults[i] == cl && !(cl->defmap & (1<<i)))
- split->defaults[i] = NULL;
- }
-
- for (i = 0; i <= TC_PRIO_MAX; i++) {
- int level = split->level;
-
- if (split->defaults[i])
- continue;
-
- for (h = 0; h < q->clhash.hashsize; h++) {
- struct cbq_class *c;
-
- hlist_for_each_entry(c, &q->clhash.hash[h],
- common.hnode) {
- if (c->split == split && c->level < level &&
- c->defmap & (1<<i)) {
- split->defaults[i] = c;
- level = c->level;
- }
- }
- }
- }
-}
-
-static void cbq_change_defmap(struct cbq_class *cl, u32 splitid, u32 def, u32 mask)
-{
- struct cbq_class *split = NULL;
-
- if (splitid == 0) {
- split = cl->split;
- if (!split)
- return;
- splitid = split->common.classid;
- }
-
- if (split == NULL || split->common.classid != splitid) {
- for (split = cl->tparent; split; split = split->tparent)
- if (split->common.classid == splitid)
- break;
- }
-
- if (split == NULL)
- return;
-
- if (cl->split != split) {
- cl->defmap = 0;
- cbq_sync_defmap(cl);
- cl->split = split;
- cl->defmap = def & mask;
- } else
- cl->defmap = (cl->defmap & ~mask) | (def & mask);
-
- cbq_sync_defmap(cl);
-}
-
-static void cbq_unlink_class(struct cbq_class *this)
-{
- struct cbq_class *cl, **clp;
- struct cbq_sched_data *q = qdisc_priv(this->qdisc);
-
- qdisc_class_hash_remove(&q->clhash, &this->common);
-
- if (this->tparent) {
- clp = &this->sibling;
- cl = *clp;
- do {
- if (cl == this) {
- *clp = cl->sibling;
- break;
- }
- clp = &cl->sibling;
- } while ((cl = *clp) != this->sibling);
-
- if (this->tparent->children == this) {
- this->tparent->children = this->sibling;
- if (this->sibling == this)
- this->tparent->children = NULL;
- }
- } else {
- WARN_ON(this->sibling != this);
- }
-}
-
-static void cbq_link_class(struct cbq_class *this)
-{
- struct cbq_sched_data *q = qdisc_priv(this->qdisc);
- struct cbq_class *parent = this->tparent;
-
- this->sibling = this;
- qdisc_class_hash_insert(&q->clhash, &this->common);
-
- if (parent == NULL)
- return;
-
- if (parent->children == NULL) {
- parent->children = this;
- } else {
- this->sibling = parent->children->sibling;
- parent->children->sibling = this;
- }
-}
-
-static void
-cbq_reset(struct Qdisc *sch)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl;
- int prio;
- unsigned int h;
-
- q->activemask = 0;
- q->pmask = 0;
- q->tx_class = NULL;
- q->tx_borrowed = NULL;
- qdisc_watchdog_cancel(&q->watchdog);
- hrtimer_cancel(&q->delay_timer);
- q->toplevel = TC_CBQ_MAXLEVEL;
- q->now = psched_get_time();
-
- for (prio = 0; prio <= TC_CBQ_MAXPRIO; prio++)
- q->active[prio] = NULL;
-
- for (h = 0; h < q->clhash.hashsize; h++) {
- hlist_for_each_entry(cl, &q->clhash.hash[h], common.hnode) {
- qdisc_reset(cl->q);
-
- cl->next_alive = NULL;
- cl->undertime = PSCHED_PASTPERFECT;
- cl->avgidle = cl->maxidle;
- cl->deficit = cl->quantum;
- cl->cpriority = cl->priority;
- }
- }
-}
-
-
-static int cbq_set_lss(struct cbq_class *cl, struct tc_cbq_lssopt *lss)
-{
- if (lss->change & TCF_CBQ_LSS_FLAGS) {
- cl->share = (lss->flags & TCF_CBQ_LSS_ISOLATED) ? NULL : cl->tparent;
- cl->borrow = (lss->flags & TCF_CBQ_LSS_BOUNDED) ? NULL : cl->tparent;
- }
- if (lss->change & TCF_CBQ_LSS_EWMA)
- cl->ewma_log = lss->ewma_log;
- if (lss->change & TCF_CBQ_LSS_AVPKT)
- cl->avpkt = lss->avpkt;
- if (lss->change & TCF_CBQ_LSS_MINIDLE)
- cl->minidle = -(long)lss->minidle;
- if (lss->change & TCF_CBQ_LSS_MAXIDLE) {
- cl->maxidle = lss->maxidle;
- cl->avgidle = lss->maxidle;
- }
- if (lss->change & TCF_CBQ_LSS_OFFTIME)
- cl->offtime = lss->offtime;
- return 0;
-}
-
-static void cbq_rmprio(struct cbq_sched_data *q, struct cbq_class *cl)
-{
- q->nclasses[cl->priority]--;
- q->quanta[cl->priority] -= cl->weight;
- cbq_normalize_quanta(q, cl->priority);
-}
-
-static void cbq_addprio(struct cbq_sched_data *q, struct cbq_class *cl)
-{
- q->nclasses[cl->priority]++;
- q->quanta[cl->priority] += cl->weight;
- cbq_normalize_quanta(q, cl->priority);
-}
-
-static int cbq_set_wrr(struct cbq_class *cl, struct tc_cbq_wrropt *wrr)
-{
- struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
-
- if (wrr->allot)
- cl->allot = wrr->allot;
- if (wrr->weight)
- cl->weight = wrr->weight;
- if (wrr->priority) {
- cl->priority = wrr->priority - 1;
- cl->cpriority = cl->priority;
- if (cl->priority >= cl->priority2)
- cl->priority2 = TC_CBQ_MAXPRIO - 1;
- }
-
- cbq_addprio(q, cl);
- return 0;
-}
-
-static int cbq_set_fopt(struct cbq_class *cl, struct tc_cbq_fopt *fopt)
-{
- cbq_change_defmap(cl, fopt->split, fopt->defmap, fopt->defchange);
- return 0;
-}
-
-static const struct nla_policy cbq_policy[TCA_CBQ_MAX + 1] = {
- [TCA_CBQ_LSSOPT] = { .len = sizeof(struct tc_cbq_lssopt) },
- [TCA_CBQ_WRROPT] = { .len = sizeof(struct tc_cbq_wrropt) },
- [TCA_CBQ_FOPT] = { .len = sizeof(struct tc_cbq_fopt) },
- [TCA_CBQ_OVL_STRATEGY] = { .len = sizeof(struct tc_cbq_ovl) },
- [TCA_CBQ_RATE] = { .len = sizeof(struct tc_ratespec) },
- [TCA_CBQ_RTAB] = { .type = NLA_BINARY, .len = TC_RTAB_SIZE },
- [TCA_CBQ_POLICE] = { .len = sizeof(struct tc_cbq_police) },
-};
-
-static int cbq_opt_parse(struct nlattr *tb[TCA_CBQ_MAX + 1],
- struct nlattr *opt,
- struct netlink_ext_ack *extack)
-{
- int err;
-
- if (!opt) {
- NL_SET_ERR_MSG(extack, "CBQ options are required for this operation");
- return -EINVAL;
- }
-
- err = nla_parse_nested_deprecated(tb, TCA_CBQ_MAX, opt,
- cbq_policy, extack);
- if (err < 0)
- return err;
-
- if (tb[TCA_CBQ_WRROPT]) {
- const struct tc_cbq_wrropt *wrr = nla_data(tb[TCA_CBQ_WRROPT]);
-
- if (wrr->priority > TC_CBQ_MAXPRIO) {
- NL_SET_ERR_MSG(extack, "priority is bigger than TC_CBQ_MAXPRIO");
- err = -EINVAL;
- }
- }
- return err;
-}
-
-static int cbq_init(struct Qdisc *sch, struct nlattr *opt,
- struct netlink_ext_ack *extack)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct nlattr *tb[TCA_CBQ_MAX + 1];
- struct tc_ratespec *r;
- int err;
-
- qdisc_watchdog_init(&q->watchdog, sch);
- hrtimer_init(&q->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_PINNED);
- q->delay_timer.function = cbq_undelay;
-
- err = cbq_opt_parse(tb, opt, extack);
- if (err < 0)
- return err;
-
- if (!tb[TCA_CBQ_RTAB] || !tb[TCA_CBQ_RATE]) {
- NL_SET_ERR_MSG(extack, "Rate specification missing or incomplete");
- return -EINVAL;
- }
-
- r = nla_data(tb[TCA_CBQ_RATE]);
-
- q->link.R_tab = qdisc_get_rtab(r, tb[TCA_CBQ_RTAB], extack);
- if (!q->link.R_tab)
- return -EINVAL;
-
- err = tcf_block_get(&q->link.block, &q->link.filter_list, sch, extack);
- if (err)
- goto put_rtab;
-
- err = qdisc_class_hash_init(&q->clhash);
- if (err < 0)
- goto put_block;
-
- q->link.sibling = &q->link;
- q->link.common.classid = sch->handle;
- q->link.qdisc = sch;
- q->link.q = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops,
- sch->handle, NULL);
- if (!q->link.q)
- q->link.q = &noop_qdisc;
- else
- qdisc_hash_add(q->link.q, true);
-
- q->link.priority = TC_CBQ_MAXPRIO - 1;
- q->link.priority2 = TC_CBQ_MAXPRIO - 1;
- q->link.cpriority = TC_CBQ_MAXPRIO - 1;
- q->link.allot = psched_mtu(qdisc_dev(sch));
- q->link.quantum = q->link.allot;
- q->link.weight = q->link.R_tab->rate.rate;
-
- q->link.ewma_log = TC_CBQ_DEF_EWMA;
- q->link.avpkt = q->link.allot/2;
- q->link.minidle = -0x7FFFFFFF;
-
- q->toplevel = TC_CBQ_MAXLEVEL;
- q->now = psched_get_time();
-
- cbq_link_class(&q->link);
-
- if (tb[TCA_CBQ_LSSOPT])
- cbq_set_lss(&q->link, nla_data(tb[TCA_CBQ_LSSOPT]));
-
- cbq_addprio(q, &q->link);
- return 0;
-
-put_block:
- tcf_block_put(q->link.block);
-
-put_rtab:
- qdisc_put_rtab(q->link.R_tab);
- return err;
-}
-
-static int cbq_dump_rate(struct sk_buff *skb, struct cbq_class *cl)
-{
- unsigned char *b = skb_tail_pointer(skb);
-
- if (nla_put(skb, TCA_CBQ_RATE, sizeof(cl->R_tab->rate), &cl->R_tab->rate))
- goto nla_put_failure;
- return skb->len;
-
-nla_put_failure:
- nlmsg_trim(skb, b);
- return -1;
-}
-
-static int cbq_dump_lss(struct sk_buff *skb, struct cbq_class *cl)
-{
- unsigned char *b = skb_tail_pointer(skb);
- struct tc_cbq_lssopt opt;
-
- opt.flags = 0;
- if (cl->borrow == NULL)
- opt.flags |= TCF_CBQ_LSS_BOUNDED;
- if (cl->share == NULL)
- opt.flags |= TCF_CBQ_LSS_ISOLATED;
- opt.ewma_log = cl->ewma_log;
- opt.level = cl->level;
- opt.avpkt = cl->avpkt;
- opt.maxidle = cl->maxidle;
- opt.minidle = (u32)(-cl->minidle);
- opt.offtime = cl->offtime;
- opt.change = ~0;
- if (nla_put(skb, TCA_CBQ_LSSOPT, sizeof(opt), &opt))
- goto nla_put_failure;
- return skb->len;
-
-nla_put_failure:
- nlmsg_trim(skb, b);
- return -1;
-}
-
-static int cbq_dump_wrr(struct sk_buff *skb, struct cbq_class *cl)
-{
- unsigned char *b = skb_tail_pointer(skb);
- struct tc_cbq_wrropt opt;
-
- memset(&opt, 0, sizeof(opt));
- opt.flags = 0;
- opt.allot = cl->allot;
- opt.priority = cl->priority + 1;
- opt.cpriority = cl->cpriority + 1;
- opt.weight = cl->weight;
- if (nla_put(skb, TCA_CBQ_WRROPT, sizeof(opt), &opt))
- goto nla_put_failure;
- return skb->len;
-
-nla_put_failure:
- nlmsg_trim(skb, b);
- return -1;
-}
-
-static int cbq_dump_fopt(struct sk_buff *skb, struct cbq_class *cl)
-{
- unsigned char *b = skb_tail_pointer(skb);
- struct tc_cbq_fopt opt;
-
- if (cl->split || cl->defmap) {
- opt.split = cl->split ? cl->split->common.classid : 0;
- opt.defmap = cl->defmap;
- opt.defchange = ~0;
- if (nla_put(skb, TCA_CBQ_FOPT, sizeof(opt), &opt))
- goto nla_put_failure;
- }
- return skb->len;
-
-nla_put_failure:
- nlmsg_trim(skb, b);
- return -1;
-}
-
-static int cbq_dump_attr(struct sk_buff *skb, struct cbq_class *cl)
-{
- if (cbq_dump_lss(skb, cl) < 0 ||
- cbq_dump_rate(skb, cl) < 0 ||
- cbq_dump_wrr(skb, cl) < 0 ||
- cbq_dump_fopt(skb, cl) < 0)
- return -1;
- return 0;
-}
-
-static int cbq_dump(struct Qdisc *sch, struct sk_buff *skb)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct nlattr *nest;
-
- nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
- if (nest == NULL)
- goto nla_put_failure;
- if (cbq_dump_attr(skb, &q->link) < 0)
- goto nla_put_failure;
- return nla_nest_end(skb, nest);
-
-nla_put_failure:
- nla_nest_cancel(skb, nest);
- return -1;
-}
-
-static int
-cbq_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
-
- q->link.xstats.avgidle = q->link.avgidle;
- return gnet_stats_copy_app(d, &q->link.xstats, sizeof(q->link.xstats));
-}
-
-static int
-cbq_dump_class(struct Qdisc *sch, unsigned long arg,
- struct sk_buff *skb, struct tcmsg *tcm)
-{
- struct cbq_class *cl = (struct cbq_class *)arg;
- struct nlattr *nest;
-
- if (cl->tparent)
- tcm->tcm_parent = cl->tparent->common.classid;
- else
- tcm->tcm_parent = TC_H_ROOT;
- tcm->tcm_handle = cl->common.classid;
- tcm->tcm_info = cl->q->handle;
-
- nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
- if (nest == NULL)
- goto nla_put_failure;
- if (cbq_dump_attr(skb, cl) < 0)
- goto nla_put_failure;
- return nla_nest_end(skb, nest);
-
-nla_put_failure:
- nla_nest_cancel(skb, nest);
- return -1;
-}
-
-static int
-cbq_dump_class_stats(struct Qdisc *sch, unsigned long arg,
- struct gnet_dump *d)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl = (struct cbq_class *)arg;
- __u32 qlen;
-
- cl->xstats.avgidle = cl->avgidle;
- cl->xstats.undertime = 0;
- qdisc_qstats_qlen_backlog(cl->q, &qlen, &cl->qstats.backlog);
-
- if (cl->undertime != PSCHED_PASTPERFECT)
- cl->xstats.undertime = cl->undertime - q->now;
-
- if (gnet_stats_copy_basic(qdisc_root_sleeping_running(sch),
- d, NULL, &cl->bstats) < 0 ||
- gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
- gnet_stats_copy_queue(d, NULL, &cl->qstats, qlen) < 0)
- return -1;
-
- return gnet_stats_copy_app(d, &cl->xstats, sizeof(cl->xstats));
-}
-
-static int cbq_graft(struct Qdisc *sch, unsigned long arg, struct Qdisc *new,
- struct Qdisc **old, struct netlink_ext_ack *extack)
-{
- struct cbq_class *cl = (struct cbq_class *)arg;
-
- if (new == NULL) {
- new = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops,
- cl->common.classid, extack);
- if (new == NULL)
- return -ENOBUFS;
- }
-
- *old = qdisc_replace(sch, new, &cl->q);
- return 0;
-}
-
-static struct Qdisc *cbq_leaf(struct Qdisc *sch, unsigned long arg)
-{
- struct cbq_class *cl = (struct cbq_class *)arg;
-
- return cl->q;
-}
-
-static void cbq_qlen_notify(struct Qdisc *sch, unsigned long arg)
-{
- struct cbq_class *cl = (struct cbq_class *)arg;
-
- cbq_deactivate_class(cl);
-}
-
-static unsigned long cbq_find(struct Qdisc *sch, u32 classid)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
-
- return (unsigned long)cbq_class_lookup(q, classid);
-}
-
-static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
-
- WARN_ON(cl->filters);
-
- tcf_block_put(cl->block);
- qdisc_put(cl->q);
- qdisc_put_rtab(cl->R_tab);
- gen_kill_estimator(&cl->rate_est);
- if (cl != &q->link)
- kfree(cl);
-}
-
-static void cbq_destroy(struct Qdisc *sch)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct hlist_node *next;
- struct cbq_class *cl;
- unsigned int h;
-
-#ifdef CONFIG_NET_CLS_ACT
- q->rx_class = NULL;
-#endif
- /*
- * Filters must be destroyed first because we don't destroy the
- * classes from root to leafs which means that filters can still
- * be bound to classes which have been destroyed already. --TGR '04
- */
- for (h = 0; h < q->clhash.hashsize; h++) {
- hlist_for_each_entry(cl, &q->clhash.hash[h], common.hnode) {
- tcf_block_put(cl->block);
- cl->block = NULL;
- }
- }
- for (h = 0; h < q->clhash.hashsize; h++) {
- hlist_for_each_entry_safe(cl, next, &q->clhash.hash[h],
- common.hnode)
- cbq_destroy_class(sch, cl);
- }
- qdisc_class_hash_destroy(&q->clhash);
-}
-
-static int
-cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **tca,
- unsigned long *arg, struct netlink_ext_ack *extack)
-{
- int err;
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl = (struct cbq_class *)*arg;
- struct nlattr *opt = tca[TCA_OPTIONS];
- struct nlattr *tb[TCA_CBQ_MAX + 1];
- struct cbq_class *parent;
- struct qdisc_rate_table *rtab = NULL;
-
- err = cbq_opt_parse(tb, opt, extack);
- if (err < 0)
- return err;
-
- if (tb[TCA_CBQ_OVL_STRATEGY] || tb[TCA_CBQ_POLICE]) {
- NL_SET_ERR_MSG(extack, "Neither overlimit strategy nor policing attributes can be used for changing class params");
- return -EOPNOTSUPP;
- }
-
- if (cl) {
- /* Check parent */
- if (parentid) {
- if (cl->tparent &&
- cl->tparent->common.classid != parentid) {
- NL_SET_ERR_MSG(extack, "Invalid parent id");
- return -EINVAL;
- }
- if (!cl->tparent && parentid != TC_H_ROOT) {
- NL_SET_ERR_MSG(extack, "Parent must be root");
- return -EINVAL;
- }
- }
-
- if (tb[TCA_CBQ_RATE]) {
- rtab = qdisc_get_rtab(nla_data(tb[TCA_CBQ_RATE]),
- tb[TCA_CBQ_RTAB], extack);
- if (rtab == NULL)
- return -EINVAL;
- }
-
- if (tca[TCA_RATE]) {
- err = gen_replace_estimator(&cl->bstats, NULL,
- &cl->rate_est,
- NULL,
- qdisc_root_sleeping_running(sch),
- tca[TCA_RATE]);
- if (err) {
- NL_SET_ERR_MSG(extack, "Failed to replace specified rate estimator");
- qdisc_put_rtab(rtab);
- return err;
- }
- }
-
- /* Change class parameters */
- sch_tree_lock(sch);
-
- if (cl->next_alive != NULL)
- cbq_deactivate_class(cl);
-
- if (rtab) {
- qdisc_put_rtab(cl->R_tab);
- cl->R_tab = rtab;
- }
-
- if (tb[TCA_CBQ_LSSOPT])
- cbq_set_lss(cl, nla_data(tb[TCA_CBQ_LSSOPT]));
-
- if (tb[TCA_CBQ_WRROPT]) {
- cbq_rmprio(q, cl);
- cbq_set_wrr(cl, nla_data(tb[TCA_CBQ_WRROPT]));
- }
-
- if (tb[TCA_CBQ_FOPT])
- cbq_set_fopt(cl, nla_data(tb[TCA_CBQ_FOPT]));
-
- if (cl->q->q.qlen)
- cbq_activate_class(cl);
-
- sch_tree_unlock(sch);
-
- return 0;
- }
-
- if (parentid == TC_H_ROOT)
- return -EINVAL;
-
- if (!tb[TCA_CBQ_WRROPT] || !tb[TCA_CBQ_RATE] || !tb[TCA_CBQ_LSSOPT]) {
- NL_SET_ERR_MSG(extack, "One of the following attributes MUST be specified: WRR, rate or link sharing");
- return -EINVAL;
- }
-
- rtab = qdisc_get_rtab(nla_data(tb[TCA_CBQ_RATE]), tb[TCA_CBQ_RTAB],
- extack);
- if (rtab == NULL)
- return -EINVAL;
-
- if (classid) {
- err = -EINVAL;
- if (TC_H_MAJ(classid ^ sch->handle) ||
- cbq_class_lookup(q, classid)) {
- NL_SET_ERR_MSG(extack, "Specified class not found");
- goto failure;
- }
- } else {
- int i;
- classid = TC_H_MAKE(sch->handle, 0x8000);
-
- for (i = 0; i < 0x8000; i++) {
- if (++q->hgenerator >= 0x8000)
- q->hgenerator = 1;
- if (cbq_class_lookup(q, classid|q->hgenerator) == NULL)
- break;
- }
- err = -ENOSR;
- if (i >= 0x8000) {
- NL_SET_ERR_MSG(extack, "Unable to generate classid");
- goto failure;
- }
- classid = classid|q->hgenerator;
- }
-
- parent = &q->link;
- if (parentid) {
- parent = cbq_class_lookup(q, parentid);
- err = -EINVAL;
- if (!parent) {
- NL_SET_ERR_MSG(extack, "Failed to find parentid");
- goto failure;
- }
- }
-
- err = -ENOBUFS;
- cl = kzalloc(sizeof(*cl), GFP_KERNEL);
- if (cl == NULL)
- goto failure;
-
- err = tcf_block_get(&cl->block, &cl->filter_list, sch, extack);
- if (err) {
- kfree(cl);
- goto failure;
- }
-
- if (tca[TCA_RATE]) {
- err = gen_new_estimator(&cl->bstats, NULL, &cl->rate_est,
- NULL,
- qdisc_root_sleeping_running(sch),
- tca[TCA_RATE]);
- if (err) {
- NL_SET_ERR_MSG(extack, "Couldn't create new estimator");
- tcf_block_put(cl->block);
- kfree(cl);
- goto failure;
- }
- }
-
- cl->R_tab = rtab;
- rtab = NULL;
- cl->q = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, classid,
- NULL);
- if (!cl->q)
- cl->q = &noop_qdisc;
- else
- qdisc_hash_add(cl->q, true);
-
- cl->common.classid = classid;
- cl->tparent = parent;
- cl->qdisc = sch;
- cl->allot = parent->allot;
- cl->quantum = cl->allot;
- cl->weight = cl->R_tab->rate.rate;
-
- sch_tree_lock(sch);
- cbq_link_class(cl);
- cl->borrow = cl->tparent;
- if (cl->tparent != &q->link)
- cl->share = cl->tparent;
- cbq_adjust_levels(parent);
- cl->minidle = -0x7FFFFFFF;
- cbq_set_lss(cl, nla_data(tb[TCA_CBQ_LSSOPT]));
- cbq_set_wrr(cl, nla_data(tb[TCA_CBQ_WRROPT]));
- if (cl->ewma_log == 0)
- cl->ewma_log = q->link.ewma_log;
- if (cl->maxidle == 0)
- cl->maxidle = q->link.maxidle;
- if (cl->avpkt == 0)
- cl->avpkt = q->link.avpkt;
- if (tb[TCA_CBQ_FOPT])
- cbq_set_fopt(cl, nla_data(tb[TCA_CBQ_FOPT]));
- sch_tree_unlock(sch);
-
- qdisc_class_hash_grow(sch, &q->clhash);
-
- *arg = (unsigned long)cl;
- return 0;
-
-failure:
- qdisc_put_rtab(rtab);
- return err;
-}
-
-static int cbq_delete(struct Qdisc *sch, unsigned long arg)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl = (struct cbq_class *)arg;
-
- if (cl->filters || cl->children || cl == &q->link)
- return -EBUSY;
-
- sch_tree_lock(sch);
-
- qdisc_purge_queue(cl->q);
-
- if (cl->next_alive)
- cbq_deactivate_class(cl);
-
- if (q->tx_borrowed == cl)
- q->tx_borrowed = q->tx_class;
- if (q->tx_class == cl) {
- q->tx_class = NULL;
- q->tx_borrowed = NULL;
- }
-#ifdef CONFIG_NET_CLS_ACT
- if (q->rx_class == cl)
- q->rx_class = NULL;
-#endif
-
- cbq_unlink_class(cl);
- cbq_adjust_levels(cl->tparent);
- cl->defmap = 0;
- cbq_sync_defmap(cl);
-
- cbq_rmprio(q, cl);
- sch_tree_unlock(sch);
-
- cbq_destroy_class(sch, cl);
- return 0;
-}
-
-static struct tcf_block *cbq_tcf_block(struct Qdisc *sch, unsigned long arg,
- struct netlink_ext_ack *extack)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl = (struct cbq_class *)arg;
-
- if (cl == NULL)
- cl = &q->link;
-
- return cl->block;
-}
-
-static unsigned long cbq_bind_filter(struct Qdisc *sch, unsigned long parent,
- u32 classid)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *p = (struct cbq_class *)parent;
- struct cbq_class *cl = cbq_class_lookup(q, classid);
-
- if (cl) {
- if (p && p->level <= cl->level)
- return 0;
- cl->filters++;
- return (unsigned long)cl;
- }
- return 0;
-}
-
-static void cbq_unbind_filter(struct Qdisc *sch, unsigned long arg)
-{
- struct cbq_class *cl = (struct cbq_class *)arg;
-
- cl->filters--;
-}
-
-static void cbq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
-{
- struct cbq_sched_data *q = qdisc_priv(sch);
- struct cbq_class *cl;
- unsigned int h;
-
- if (arg->stop)
- return;
-
- for (h = 0; h < q->clhash.hashsize; h++) {
- hlist_for_each_entry(cl, &q->clhash.hash[h], common.hnode) {
- if (arg->count < arg->skip) {
- arg->count++;
- continue;
- }
- if (arg->fn(sch, (unsigned long)cl, arg) < 0) {
- arg->stop = 1;
- return;
- }
- arg->count++;
- }
- }
-}
-
-static const struct Qdisc_class_ops cbq_class_ops = {
- .graft = cbq_graft,
- .leaf = cbq_leaf,
- .qlen_notify = cbq_qlen_notify,
- .find = cbq_find,
- .change = cbq_change_class,
- .delete = cbq_delete,
- .walk = cbq_walk,
- .tcf_block = cbq_tcf_block,
- .bind_tcf = cbq_bind_filter,
- .unbind_tcf = cbq_unbind_filter,
- .dump = cbq_dump_class,
- .dump_stats = cbq_dump_class_stats,
-};
-
-static struct Qdisc_ops cbq_qdisc_ops __read_mostly = {
- .next = NULL,
- .cl_ops = &cbq_class_ops,
- .id = "cbq",
- .priv_size = sizeof(struct cbq_sched_data),
- .enqueue = cbq_enqueue,
- .dequeue = cbq_dequeue,
- .peek = qdisc_peek_dequeued,
- .init = cbq_init,
- .reset = cbq_reset,
- .destroy = cbq_destroy,
- .change = NULL,
- .dump = cbq_dump,
- .dump_stats = cbq_dump_stats,
- .owner = THIS_MODULE,
-};
-
-static int __init cbq_module_init(void)
-{
- return register_qdisc(&cbq_qdisc_ops);
-}
-static void __exit cbq_module_exit(void)
-{
- unregister_qdisc(&cbq_qdisc_ops);
-}
-module_init(cbq_module_init)
-module_exit(cbq_module_exit)
-MODULE_LICENSE("GPL");
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 002/122] net/sched: Retire ATM qdisc
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 001/122] net/sched: Retire CBQ qdisc Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 003/122] net/sched: Retire dsmark qdisc Greg Kroah-Hartman
` (125 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jamal Hadi Salim, Jiri Pirko,
Paolo Abeni
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jamal Hadi Salim <jhs@mojatatu.com>
commit fb38306ceb9e770adfb5ffa6e3c64047b55f7a07 upstream.
The ATM qdisc has served us well over the years but has not been getting much
TLC due to lack of known users. Most recently it has become a shooting target
for syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/Kconfig | 14 -
net/sched/Makefile | 1
net/sched/sch_atm.c | 709 ----------------------------------------------------
3 files changed, 724 deletions(-)
delete mode 100644 net/sched/sch_atm.c
delete mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -68,20 +68,6 @@ config NET_SCH_HFSC
To compile this code as a module, choose M here: the
module will be called sch_hfsc.
-config NET_SCH_ATM
- tristate "ATM Virtual Circuits (ATM)"
- depends on ATM
- help
- Say Y here if you want to use the ATM pseudo-scheduler. This
- provides a framework for invoking classifiers, which in turn
- select classes of this queuing discipline. Each class maps
- the flow(s) it is handling to a given virtual circuit.
-
- See the top of <file:net/sched/sch_atm.c> for more details.
-
- To compile this code as a module, choose M here: the
- module will be called sch_atm.
-
config NET_SCH_PRIO
tristate "Multi Band Priority Queueing (PRIO)"
help
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o
obj-$(CONFIG_NET_SCH_TEQL) += sch_teql.o
obj-$(CONFIG_NET_SCH_PRIO) += sch_prio.o
obj-$(CONFIG_NET_SCH_MULTIQ) += sch_multiq.o
-obj-$(CONFIG_NET_SCH_ATM) += sch_atm.o
obj-$(CONFIG_NET_SCH_NETEM) += sch_netem.o
obj-$(CONFIG_NET_SCH_DRR) += sch_drr.o
obj-$(CONFIG_NET_SCH_PLUG) += sch_plug.o
--- a/net/sched/sch_atm.c
+++ /dev/null
@@ -1,709 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* net/sched/sch_atm.c - ATM VC selection "queueing discipline" */
-
-/* Written 1998-2000 by Werner Almesberger, EPFL ICA */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/skbuff.h>
-#include <linux/atmdev.h>
-#include <linux/atmclip.h>
-#include <linux/rtnetlink.h>
-#include <linux/file.h> /* for fput */
-#include <net/netlink.h>
-#include <net/pkt_sched.h>
-#include <net/pkt_cls.h>
-
-/*
- * The ATM queuing discipline provides a framework for invoking classifiers
- * (aka "filters"), which in turn select classes of this queuing discipline.
- * Each class maps the flow(s) it is handling to a given VC. Multiple classes
- * may share the same VC.
- *
- * When creating a class, VCs are specified by passing the number of the open
- * socket descriptor by which the calling process references the VC. The kernel
- * keeps the VC open at least until all classes using it are removed.
- *
- * In this file, most functions are named atm_tc_* to avoid confusion with all
- * the atm_* in net/atm. This naming convention differs from what's used in the
- * rest of net/sched.
- *
- * Known bugs:
- * - sometimes messes up the IP stack
- * - any manipulations besides the few operations described in the README, are
- * untested and likely to crash the system
- * - should lock the flow while there is data in the queue (?)
- */
-
-#define VCC2FLOW(vcc) ((struct atm_flow_data *) ((vcc)->user_back))
-
-struct atm_flow_data {
- struct Qdisc_class_common common;
- struct Qdisc *q; /* FIFO, TBF, etc. */
- struct tcf_proto __rcu *filter_list;
- struct tcf_block *block;
- struct atm_vcc *vcc; /* VCC; NULL if VCC is closed */
- void (*old_pop)(struct atm_vcc *vcc,
- struct sk_buff *skb); /* chaining */
- struct atm_qdisc_data *parent; /* parent qdisc */
- struct socket *sock; /* for closing */
- int ref; /* reference count */
- struct gnet_stats_basic_packed bstats;
- struct gnet_stats_queue qstats;
- struct list_head list;
- struct atm_flow_data *excess; /* flow for excess traffic;
- NULL to set CLP instead */
- int hdr_len;
- unsigned char hdr[]; /* header data; MUST BE LAST */
-};
-
-struct atm_qdisc_data {
- struct atm_flow_data link; /* unclassified skbs go here */
- struct list_head flows; /* NB: "link" is also on this
- list */
- struct tasklet_struct task; /* dequeue tasklet */
-};
-
-/* ------------------------- Class/flow operations ------------------------- */
-
-static inline struct atm_flow_data *lookup_flow(struct Qdisc *sch, u32 classid)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow;
-
- list_for_each_entry(flow, &p->flows, list) {
- if (flow->common.classid == classid)
- return flow;
- }
- return NULL;
-}
-
-static int atm_tc_graft(struct Qdisc *sch, unsigned long arg,
- struct Qdisc *new, struct Qdisc **old,
- struct netlink_ext_ack *extack)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow = (struct atm_flow_data *)arg;
-
- pr_debug("atm_tc_graft(sch %p,[qdisc %p],flow %p,new %p,old %p)\n",
- sch, p, flow, new, old);
- if (list_empty(&flow->list))
- return -EINVAL;
- if (!new)
- new = &noop_qdisc;
- *old = flow->q;
- flow->q = new;
- if (*old)
- qdisc_reset(*old);
- return 0;
-}
-
-static struct Qdisc *atm_tc_leaf(struct Qdisc *sch, unsigned long cl)
-{
- struct atm_flow_data *flow = (struct atm_flow_data *)cl;
-
- pr_debug("atm_tc_leaf(sch %p,flow %p)\n", sch, flow);
- return flow ? flow->q : NULL;
-}
-
-static unsigned long atm_tc_find(struct Qdisc *sch, u32 classid)
-{
- struct atm_qdisc_data *p __maybe_unused = qdisc_priv(sch);
- struct atm_flow_data *flow;
-
- pr_debug("%s(sch %p,[qdisc %p],classid %x)\n", __func__, sch, p, classid);
- flow = lookup_flow(sch, classid);
- pr_debug("%s: flow %p\n", __func__, flow);
- return (unsigned long)flow;
-}
-
-static unsigned long atm_tc_bind_filter(struct Qdisc *sch,
- unsigned long parent, u32 classid)
-{
- struct atm_qdisc_data *p __maybe_unused = qdisc_priv(sch);
- struct atm_flow_data *flow;
-
- pr_debug("%s(sch %p,[qdisc %p],classid %x)\n", __func__, sch, p, classid);
- flow = lookup_flow(sch, classid);
- if (flow)
- flow->ref++;
- pr_debug("%s: flow %p\n", __func__, flow);
- return (unsigned long)flow;
-}
-
-/*
- * atm_tc_put handles all destructions, including the ones that are explicitly
- * requested (atm_tc_destroy, etc.). The assumption here is that we never drop
- * anything that still seems to be in use.
- */
-static void atm_tc_put(struct Qdisc *sch, unsigned long cl)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow = (struct atm_flow_data *)cl;
-
- pr_debug("atm_tc_put(sch %p,[qdisc %p],flow %p)\n", sch, p, flow);
- if (--flow->ref)
- return;
- pr_debug("atm_tc_put: destroying\n");
- list_del_init(&flow->list);
- pr_debug("atm_tc_put: qdisc %p\n", flow->q);
- qdisc_put(flow->q);
- tcf_block_put(flow->block);
- if (flow->sock) {
- pr_debug("atm_tc_put: f_count %ld\n",
- file_count(flow->sock->file));
- flow->vcc->pop = flow->old_pop;
- sockfd_put(flow->sock);
- }
- if (flow->excess)
- atm_tc_put(sch, (unsigned long)flow->excess);
- if (flow != &p->link)
- kfree(flow);
- /*
- * If flow == &p->link, the qdisc no longer works at this point and
- * needs to be removed. (By the caller of atm_tc_put.)
- */
-}
-
-static void sch_atm_pop(struct atm_vcc *vcc, struct sk_buff *skb)
-{
- struct atm_qdisc_data *p = VCC2FLOW(vcc)->parent;
-
- pr_debug("sch_atm_pop(vcc %p,skb %p,[qdisc %p])\n", vcc, skb, p);
- VCC2FLOW(vcc)->old_pop(vcc, skb);
- tasklet_schedule(&p->task);
-}
-
-static const u8 llc_oui_ip[] = {
- 0xaa, /* DSAP: non-ISO */
- 0xaa, /* SSAP: non-ISO */
- 0x03, /* Ctrl: Unnumbered Information Command PDU */
- 0x00, /* OUI: EtherType */
- 0x00, 0x00,
- 0x08, 0x00
-}; /* Ethertype IP (0800) */
-
-static const struct nla_policy atm_policy[TCA_ATM_MAX + 1] = {
- [TCA_ATM_FD] = { .type = NLA_U32 },
- [TCA_ATM_EXCESS] = { .type = NLA_U32 },
-};
-
-static int atm_tc_change(struct Qdisc *sch, u32 classid, u32 parent,
- struct nlattr **tca, unsigned long *arg,
- struct netlink_ext_ack *extack)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow = (struct atm_flow_data *)*arg;
- struct atm_flow_data *excess = NULL;
- struct nlattr *opt = tca[TCA_OPTIONS];
- struct nlattr *tb[TCA_ATM_MAX + 1];
- struct socket *sock;
- int fd, error, hdr_len;
- void *hdr;
-
- pr_debug("atm_tc_change(sch %p,[qdisc %p],classid %x,parent %x,"
- "flow %p,opt %p)\n", sch, p, classid, parent, flow, opt);
- /*
- * The concept of parents doesn't apply for this qdisc.
- */
- if (parent && parent != TC_H_ROOT && parent != sch->handle)
- return -EINVAL;
- /*
- * ATM classes cannot be changed. In order to change properties of the
- * ATM connection, that socket needs to be modified directly (via the
- * native ATM API. In order to send a flow to a different VC, the old
- * class needs to be removed and a new one added. (This may be changed
- * later.)
- */
- if (flow)
- return -EBUSY;
- if (opt == NULL)
- return -EINVAL;
-
- error = nla_parse_nested_deprecated(tb, TCA_ATM_MAX, opt, atm_policy,
- NULL);
- if (error < 0)
- return error;
-
- if (!tb[TCA_ATM_FD])
- return -EINVAL;
- fd = nla_get_u32(tb[TCA_ATM_FD]);
- pr_debug("atm_tc_change: fd %d\n", fd);
- if (tb[TCA_ATM_HDR]) {
- hdr_len = nla_len(tb[TCA_ATM_HDR]);
- hdr = nla_data(tb[TCA_ATM_HDR]);
- } else {
- hdr_len = RFC1483LLC_LEN;
- hdr = NULL; /* default LLC/SNAP for IP */
- }
- if (!tb[TCA_ATM_EXCESS])
- excess = NULL;
- else {
- excess = (struct atm_flow_data *)
- atm_tc_find(sch, nla_get_u32(tb[TCA_ATM_EXCESS]));
- if (!excess)
- return -ENOENT;
- }
- pr_debug("atm_tc_change: type %d, payload %d, hdr_len %d\n",
- opt->nla_type, nla_len(opt), hdr_len);
- sock = sockfd_lookup(fd, &error);
- if (!sock)
- return error; /* f_count++ */
- pr_debug("atm_tc_change: f_count %ld\n", file_count(sock->file));
- if (sock->ops->family != PF_ATMSVC && sock->ops->family != PF_ATMPVC) {
- error = -EPROTOTYPE;
- goto err_out;
- }
- /* @@@ should check if the socket is really operational or we'll crash
- on vcc->send */
- if (classid) {
- if (TC_H_MAJ(classid ^ sch->handle)) {
- pr_debug("atm_tc_change: classid mismatch\n");
- error = -EINVAL;
- goto err_out;
- }
- } else {
- int i;
- unsigned long cl;
-
- for (i = 1; i < 0x8000; i++) {
- classid = TC_H_MAKE(sch->handle, 0x8000 | i);
- cl = atm_tc_find(sch, classid);
- if (!cl)
- break;
- }
- }
- pr_debug("atm_tc_change: new id %x\n", classid);
- flow = kzalloc(sizeof(struct atm_flow_data) + hdr_len, GFP_KERNEL);
- pr_debug("atm_tc_change: flow %p\n", flow);
- if (!flow) {
- error = -ENOBUFS;
- goto err_out;
- }
-
- error = tcf_block_get(&flow->block, &flow->filter_list, sch,
- extack);
- if (error) {
- kfree(flow);
- goto err_out;
- }
-
- flow->q = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, classid,
- extack);
- if (!flow->q)
- flow->q = &noop_qdisc;
- pr_debug("atm_tc_change: qdisc %p\n", flow->q);
- flow->sock = sock;
- flow->vcc = ATM_SD(sock); /* speedup */
- flow->vcc->user_back = flow;
- pr_debug("atm_tc_change: vcc %p\n", flow->vcc);
- flow->old_pop = flow->vcc->pop;
- flow->parent = p;
- flow->vcc->pop = sch_atm_pop;
- flow->common.classid = classid;
- flow->ref = 1;
- flow->excess = excess;
- list_add(&flow->list, &p->link.list);
- flow->hdr_len = hdr_len;
- if (hdr)
- memcpy(flow->hdr, hdr, hdr_len);
- else
- memcpy(flow->hdr, llc_oui_ip, sizeof(llc_oui_ip));
- *arg = (unsigned long)flow;
- return 0;
-err_out:
- sockfd_put(sock);
- return error;
-}
-
-static int atm_tc_delete(struct Qdisc *sch, unsigned long arg)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow = (struct atm_flow_data *)arg;
-
- pr_debug("atm_tc_delete(sch %p,[qdisc %p],flow %p)\n", sch, p, flow);
- if (list_empty(&flow->list))
- return -EINVAL;
- if (rcu_access_pointer(flow->filter_list) || flow == &p->link)
- return -EBUSY;
- /*
- * Reference count must be 2: one for "keepalive" (set at class
- * creation), and one for the reference held when calling delete.
- */
- if (flow->ref < 2) {
- pr_err("atm_tc_delete: flow->ref == %d\n", flow->ref);
- return -EINVAL;
- }
- if (flow->ref > 2)
- return -EBUSY; /* catch references via excess, etc. */
- atm_tc_put(sch, arg);
- return 0;
-}
-
-static void atm_tc_walk(struct Qdisc *sch, struct qdisc_walker *walker)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow;
-
- pr_debug("atm_tc_walk(sch %p,[qdisc %p],walker %p)\n", sch, p, walker);
- if (walker->stop)
- return;
- list_for_each_entry(flow, &p->flows, list) {
- if (walker->count >= walker->skip &&
- walker->fn(sch, (unsigned long)flow, walker) < 0) {
- walker->stop = 1;
- break;
- }
- walker->count++;
- }
-}
-
-static struct tcf_block *atm_tc_tcf_block(struct Qdisc *sch, unsigned long cl,
- struct netlink_ext_ack *extack)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow = (struct atm_flow_data *)cl;
-
- pr_debug("atm_tc_find_tcf(sch %p,[qdisc %p],flow %p)\n", sch, p, flow);
- return flow ? flow->block : p->link.block;
-}
-
-/* --------------------------- Qdisc operations ---------------------------- */
-
-static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
- struct sk_buff **to_free)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow;
- struct tcf_result res;
- int result;
- int ret = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
-
- pr_debug("atm_tc_enqueue(skb %p,sch %p,[qdisc %p])\n", skb, sch, p);
- result = TC_ACT_OK; /* be nice to gcc */
- flow = NULL;
- if (TC_H_MAJ(skb->priority) != sch->handle ||
- !(flow = (struct atm_flow_data *)atm_tc_find(sch, skb->priority))) {
- struct tcf_proto *fl;
-
- list_for_each_entry(flow, &p->flows, list) {
- fl = rcu_dereference_bh(flow->filter_list);
- if (fl) {
- result = tcf_classify(skb, fl, &res, true);
- if (result < 0)
- continue;
- if (result == TC_ACT_SHOT)
- goto done;
-
- flow = (struct atm_flow_data *)res.class;
- if (!flow)
- flow = lookup_flow(sch, res.classid);
- goto drop;
- }
- }
- flow = NULL;
-done:
- ;
- }
- if (!flow) {
- flow = &p->link;
- } else {
- if (flow->vcc)
- ATM_SKB(skb)->atm_options = flow->vcc->atm_options;
- /*@@@ looks good ... but it's not supposed to work :-) */
-#ifdef CONFIG_NET_CLS_ACT
- switch (result) {
- case TC_ACT_QUEUED:
- case TC_ACT_STOLEN:
- case TC_ACT_TRAP:
- __qdisc_drop(skb, to_free);
- return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
- case TC_ACT_SHOT:
- __qdisc_drop(skb, to_free);
- goto drop;
- case TC_ACT_RECLASSIFY:
- if (flow->excess)
- flow = flow->excess;
- else
- ATM_SKB(skb)->atm_options |= ATM_ATMOPT_CLP;
- break;
- }
-#endif
- }
-
- ret = qdisc_enqueue(skb, flow->q, to_free);
- if (ret != NET_XMIT_SUCCESS) {
-drop: __maybe_unused
- if (net_xmit_drop_count(ret)) {
- qdisc_qstats_drop(sch);
- if (flow)
- flow->qstats.drops++;
- }
- return ret;
- }
- /*
- * Okay, this may seem weird. We pretend we've dropped the packet if
- * it goes via ATM. The reason for this is that the outer qdisc
- * expects to be able to q->dequeue the packet later on if we return
- * success at this place. Also, sch->q.qdisc needs to reflect whether
- * there is a packet egligible for dequeuing or not. Note that the
- * statistics of the outer qdisc are necessarily wrong because of all
- * this. There's currently no correct solution for this.
- */
- if (flow == &p->link) {
- sch->q.qlen++;
- return NET_XMIT_SUCCESS;
- }
- tasklet_schedule(&p->task);
- return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
-}
-
-/*
- * Dequeue packets and send them over ATM. Note that we quite deliberately
- * avoid checking net_device's flow control here, simply because sch_atm
- * uses its own channels, which have nothing to do with any CLIP/LANE/or
- * non-ATM interfaces.
- */
-
-static void sch_atm_dequeue(unsigned long data)
-{
- struct Qdisc *sch = (struct Qdisc *)data;
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow;
- struct sk_buff *skb;
-
- pr_debug("sch_atm_dequeue(sch %p,[qdisc %p])\n", sch, p);
- list_for_each_entry(flow, &p->flows, list) {
- if (flow == &p->link)
- continue;
- /*
- * If traffic is properly shaped, this won't generate nasty
- * little bursts. Otherwise, it may ... (but that's okay)
- */
- while ((skb = flow->q->ops->peek(flow->q))) {
- if (!atm_may_send(flow->vcc, skb->truesize))
- break;
-
- skb = qdisc_dequeue_peeked(flow->q);
- if (unlikely(!skb))
- break;
-
- qdisc_bstats_update(sch, skb);
- bstats_update(&flow->bstats, skb);
- pr_debug("atm_tc_dequeue: sending on class %p\n", flow);
- /* remove any LL header somebody else has attached */
- skb_pull(skb, skb_network_offset(skb));
- if (skb_headroom(skb) < flow->hdr_len) {
- struct sk_buff *new;
-
- new = skb_realloc_headroom(skb, flow->hdr_len);
- dev_kfree_skb(skb);
- if (!new)
- continue;
- skb = new;
- }
- pr_debug("sch_atm_dequeue: ip %p, data %p\n",
- skb_network_header(skb), skb->data);
- ATM_SKB(skb)->vcc = flow->vcc;
- memcpy(skb_push(skb, flow->hdr_len), flow->hdr,
- flow->hdr_len);
- refcount_add(skb->truesize,
- &sk_atm(flow->vcc)->sk_wmem_alloc);
- /* atm.atm_options are already set by atm_tc_enqueue */
- flow->vcc->send(flow->vcc, skb);
- }
- }
-}
-
-static struct sk_buff *atm_tc_dequeue(struct Qdisc *sch)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct sk_buff *skb;
-
- pr_debug("atm_tc_dequeue(sch %p,[qdisc %p])\n", sch, p);
- tasklet_schedule(&p->task);
- skb = qdisc_dequeue_peeked(p->link.q);
- if (skb)
- sch->q.qlen--;
- return skb;
-}
-
-static struct sk_buff *atm_tc_peek(struct Qdisc *sch)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
-
- pr_debug("atm_tc_peek(sch %p,[qdisc %p])\n", sch, p);
-
- return p->link.q->ops->peek(p->link.q);
-}
-
-static int atm_tc_init(struct Qdisc *sch, struct nlattr *opt,
- struct netlink_ext_ack *extack)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- int err;
-
- pr_debug("atm_tc_init(sch %p,[qdisc %p],opt %p)\n", sch, p, opt);
- INIT_LIST_HEAD(&p->flows);
- INIT_LIST_HEAD(&p->link.list);
- list_add(&p->link.list, &p->flows);
- p->link.q = qdisc_create_dflt(sch->dev_queue,
- &pfifo_qdisc_ops, sch->handle, extack);
- if (!p->link.q)
- p->link.q = &noop_qdisc;
- pr_debug("atm_tc_init: link (%p) qdisc %p\n", &p->link, p->link.q);
- p->link.vcc = NULL;
- p->link.sock = NULL;
- p->link.common.classid = sch->handle;
- p->link.ref = 1;
-
- err = tcf_block_get(&p->link.block, &p->link.filter_list, sch,
- extack);
- if (err)
- return err;
-
- tasklet_init(&p->task, sch_atm_dequeue, (unsigned long)sch);
- return 0;
-}
-
-static void atm_tc_reset(struct Qdisc *sch)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow;
-
- pr_debug("atm_tc_reset(sch %p,[qdisc %p])\n", sch, p);
- list_for_each_entry(flow, &p->flows, list)
- qdisc_reset(flow->q);
-}
-
-static void atm_tc_destroy(struct Qdisc *sch)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow, *tmp;
-
- pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p);
- list_for_each_entry(flow, &p->flows, list) {
- tcf_block_put(flow->block);
- flow->block = NULL;
- }
-
- list_for_each_entry_safe(flow, tmp, &p->flows, list) {
- if (flow->ref > 1)
- pr_err("atm_destroy: %p->ref = %d\n", flow, flow->ref);
- atm_tc_put(sch, (unsigned long)flow);
- }
- tasklet_kill(&p->task);
-}
-
-static int atm_tc_dump_class(struct Qdisc *sch, unsigned long cl,
- struct sk_buff *skb, struct tcmsg *tcm)
-{
- struct atm_qdisc_data *p = qdisc_priv(sch);
- struct atm_flow_data *flow = (struct atm_flow_data *)cl;
- struct nlattr *nest;
-
- pr_debug("atm_tc_dump_class(sch %p,[qdisc %p],flow %p,skb %p,tcm %p)\n",
- sch, p, flow, skb, tcm);
- if (list_empty(&flow->list))
- return -EINVAL;
- tcm->tcm_handle = flow->common.classid;
- tcm->tcm_info = flow->q->handle;
-
- nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
- if (nest == NULL)
- goto nla_put_failure;
-
- if (nla_put(skb, TCA_ATM_HDR, flow->hdr_len, flow->hdr))
- goto nla_put_failure;
- if (flow->vcc) {
- struct sockaddr_atmpvc pvc;
- int state;
-
- memset(&pvc, 0, sizeof(pvc));
- pvc.sap_family = AF_ATMPVC;
- pvc.sap_addr.itf = flow->vcc->dev ? flow->vcc->dev->number : -1;
- pvc.sap_addr.vpi = flow->vcc->vpi;
- pvc.sap_addr.vci = flow->vcc->vci;
- if (nla_put(skb, TCA_ATM_ADDR, sizeof(pvc), &pvc))
- goto nla_put_failure;
- state = ATM_VF2VS(flow->vcc->flags);
- if (nla_put_u32(skb, TCA_ATM_STATE, state))
- goto nla_put_failure;
- }
- if (flow->excess) {
- if (nla_put_u32(skb, TCA_ATM_EXCESS, flow->common.classid))
- goto nla_put_failure;
- } else {
- if (nla_put_u32(skb, TCA_ATM_EXCESS, 0))
- goto nla_put_failure;
- }
- return nla_nest_end(skb, nest);
-
-nla_put_failure:
- nla_nest_cancel(skb, nest);
- return -1;
-}
-static int
-atm_tc_dump_class_stats(struct Qdisc *sch, unsigned long arg,
- struct gnet_dump *d)
-{
- struct atm_flow_data *flow = (struct atm_flow_data *)arg;
-
- if (gnet_stats_copy_basic(qdisc_root_sleeping_running(sch),
- d, NULL, &flow->bstats) < 0 ||
- gnet_stats_copy_queue(d, NULL, &flow->qstats, flow->q->q.qlen) < 0)
- return -1;
-
- return 0;
-}
-
-static int atm_tc_dump(struct Qdisc *sch, struct sk_buff *skb)
-{
- return 0;
-}
-
-static const struct Qdisc_class_ops atm_class_ops = {
- .graft = atm_tc_graft,
- .leaf = atm_tc_leaf,
- .find = atm_tc_find,
- .change = atm_tc_change,
- .delete = atm_tc_delete,
- .walk = atm_tc_walk,
- .tcf_block = atm_tc_tcf_block,
- .bind_tcf = atm_tc_bind_filter,
- .unbind_tcf = atm_tc_put,
- .dump = atm_tc_dump_class,
- .dump_stats = atm_tc_dump_class_stats,
-};
-
-static struct Qdisc_ops atm_qdisc_ops __read_mostly = {
- .cl_ops = &atm_class_ops,
- .id = "atm",
- .priv_size = sizeof(struct atm_qdisc_data),
- .enqueue = atm_tc_enqueue,
- .dequeue = atm_tc_dequeue,
- .peek = atm_tc_peek,
- .init = atm_tc_init,
- .reset = atm_tc_reset,
- .destroy = atm_tc_destroy,
- .dump = atm_tc_dump,
- .owner = THIS_MODULE,
-};
-
-static int __init atm_init(void)
-{
- return register_qdisc(&atm_qdisc_ops);
-}
-
-static void __exit atm_exit(void)
-{
- unregister_qdisc(&atm_qdisc_ops);
-}
-
-module_init(atm_init)
-module_exit(atm_exit)
-MODULE_LICENSE("GPL");
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 003/122] net/sched: Retire dsmark qdisc
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 001/122] net/sched: Retire CBQ qdisc Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 002/122] net/sched: Retire ATM qdisc Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 004/122] smb: client: fix OOB in receive_encrypted_standard() Greg Kroah-Hartman
` (124 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jamal Hadi Salim, Jiri Pirko,
Paolo Abeni
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jamal Hadi Salim <jhs@mojatatu.com>
commit bbe77c14ee6185a61ba6d5e435c1cbb489d2a9ed upstream.
The dsmark qdisc has served us well over the years for diffserv but has not
been getting much attention due to other more popular approaches to do diffserv
services. Most recently it has become a shooting target for syzkaller. For this
reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/Kconfig | 11 -
net/sched/Makefile | 1
net/sched/sch_dsmark.c | 521 -------------------------------------------------
3 files changed, 533 deletions(-)
delete mode 100644 net/sched/sch_dsmark.c
delete mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dsmark.json
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -186,17 +186,6 @@ config NET_SCH_GRED
To compile this code as a module, choose M here: the
module will be called sch_gred.
-config NET_SCH_DSMARK
- tristate "Differentiated Services marker (DSMARK)"
- help
- Say Y if you want to schedule packets according to the
- Differentiated Services architecture proposed in RFC 2475.
- Technical information on this method, with pointers to associated
- RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
-
- To compile this code as a module, choose M here: the
- module will be called sch_dsmark.
-
config NET_SCH_NETEM
tristate "Network emulator (NETEM)"
help
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_NET_SCH_HFSC) += sch_hfsc.o
obj-$(CONFIG_NET_SCH_RED) += sch_red.o
obj-$(CONFIG_NET_SCH_GRED) += sch_gred.o
obj-$(CONFIG_NET_SCH_INGRESS) += sch_ingress.o
-obj-$(CONFIG_NET_SCH_DSMARK) += sch_dsmark.o
obj-$(CONFIG_NET_SCH_SFB) += sch_sfb.o
obj-$(CONFIG_NET_SCH_SFQ) += sch_sfq.o
obj-$(CONFIG_NET_SCH_TBF) += sch_tbf.o
--- a/net/sched/sch_dsmark.c
+++ /dev/null
@@ -1,521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* net/sched/sch_dsmark.c - Differentiated Services field marker */
-
-/* Written 1998-2000 by Werner Almesberger, EPFL ICA */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/skbuff.h>
-#include <linux/rtnetlink.h>
-#include <linux/bitops.h>
-#include <net/pkt_sched.h>
-#include <net/pkt_cls.h>
-#include <net/dsfield.h>
-#include <net/inet_ecn.h>
-#include <asm/byteorder.h>
-
-/*
- * classid class marking
- * ------- ----- -------
- * n/a 0 n/a
- * x:0 1 use entry [0]
- * ... ... ...
- * x:y y>0 y+1 use entry [y]
- * ... ... ...
- * x:indices-1 indices use entry [indices-1]
- * ... ... ...
- * x:y y+1 use entry [y & (indices-1)]
- * ... ... ...
- * 0xffff 0x10000 use entry [indices-1]
- */
-
-
-#define NO_DEFAULT_INDEX (1 << 16)
-
-struct mask_value {
- u8 mask;
- u8 value;
-};
-
-struct dsmark_qdisc_data {
- struct Qdisc *q;
- struct tcf_proto __rcu *filter_list;
- struct tcf_block *block;
- struct mask_value *mv;
- u16 indices;
- u8 set_tc_index;
- u32 default_index; /* index range is 0...0xffff */
-#define DSMARK_EMBEDDED_SZ 16
- struct mask_value embedded[DSMARK_EMBEDDED_SZ];
-};
-
-static inline int dsmark_valid_index(struct dsmark_qdisc_data *p, u16 index)
-{
- return index <= p->indices && index > 0;
-}
-
-/* ------------------------- Class/flow operations ------------------------- */
-
-static int dsmark_graft(struct Qdisc *sch, unsigned long arg,
- struct Qdisc *new, struct Qdisc **old,
- struct netlink_ext_ack *extack)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
-
- pr_debug("%s(sch %p,[qdisc %p],new %p,old %p)\n",
- __func__, sch, p, new, old);
-
- if (new == NULL) {
- new = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops,
- sch->handle, NULL);
- if (new == NULL)
- new = &noop_qdisc;
- }
-
- *old = qdisc_replace(sch, new, &p->q);
- return 0;
-}
-
-static struct Qdisc *dsmark_leaf(struct Qdisc *sch, unsigned long arg)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- return p->q;
-}
-
-static unsigned long dsmark_find(struct Qdisc *sch, u32 classid)
-{
- return TC_H_MIN(classid) + 1;
-}
-
-static unsigned long dsmark_bind_filter(struct Qdisc *sch,
- unsigned long parent, u32 classid)
-{
- pr_debug("%s(sch %p,[qdisc %p],classid %x)\n",
- __func__, sch, qdisc_priv(sch), classid);
-
- return dsmark_find(sch, classid);
-}
-
-static void dsmark_unbind_filter(struct Qdisc *sch, unsigned long cl)
-{
-}
-
-static const struct nla_policy dsmark_policy[TCA_DSMARK_MAX + 1] = {
- [TCA_DSMARK_INDICES] = { .type = NLA_U16 },
- [TCA_DSMARK_DEFAULT_INDEX] = { .type = NLA_U16 },
- [TCA_DSMARK_SET_TC_INDEX] = { .type = NLA_FLAG },
- [TCA_DSMARK_MASK] = { .type = NLA_U8 },
- [TCA_DSMARK_VALUE] = { .type = NLA_U8 },
-};
-
-static int dsmark_change(struct Qdisc *sch, u32 classid, u32 parent,
- struct nlattr **tca, unsigned long *arg,
- struct netlink_ext_ack *extack)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- struct nlattr *opt = tca[TCA_OPTIONS];
- struct nlattr *tb[TCA_DSMARK_MAX + 1];
- int err = -EINVAL;
-
- pr_debug("%s(sch %p,[qdisc %p],classid %x,parent %x), arg 0x%lx\n",
- __func__, sch, p, classid, parent, *arg);
-
- if (!dsmark_valid_index(p, *arg)) {
- err = -ENOENT;
- goto errout;
- }
-
- if (!opt)
- goto errout;
-
- err = nla_parse_nested_deprecated(tb, TCA_DSMARK_MAX, opt,
- dsmark_policy, NULL);
- if (err < 0)
- goto errout;
-
- if (tb[TCA_DSMARK_VALUE])
- p->mv[*arg - 1].value = nla_get_u8(tb[TCA_DSMARK_VALUE]);
-
- if (tb[TCA_DSMARK_MASK])
- p->mv[*arg - 1].mask = nla_get_u8(tb[TCA_DSMARK_MASK]);
-
- err = 0;
-
-errout:
- return err;
-}
-
-static int dsmark_delete(struct Qdisc *sch, unsigned long arg)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
-
- if (!dsmark_valid_index(p, arg))
- return -EINVAL;
-
- p->mv[arg - 1].mask = 0xff;
- p->mv[arg - 1].value = 0;
-
- return 0;
-}
-
-static void dsmark_walk(struct Qdisc *sch, struct qdisc_walker *walker)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- int i;
-
- pr_debug("%s(sch %p,[qdisc %p],walker %p)\n",
- __func__, sch, p, walker);
-
- if (walker->stop)
- return;
-
- for (i = 0; i < p->indices; i++) {
- if (p->mv[i].mask == 0xff && !p->mv[i].value)
- goto ignore;
- if (walker->count >= walker->skip) {
- if (walker->fn(sch, i + 1, walker) < 0) {
- walker->stop = 1;
- break;
- }
- }
-ignore:
- walker->count++;
- }
-}
-
-static struct tcf_block *dsmark_tcf_block(struct Qdisc *sch, unsigned long cl,
- struct netlink_ext_ack *extack)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
-
- return p->block;
-}
-
-/* --------------------------- Qdisc operations ---------------------------- */
-
-static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch,
- struct sk_buff **to_free)
-{
- unsigned int len = qdisc_pkt_len(skb);
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- int err;
-
- pr_debug("%s(skb %p,sch %p,[qdisc %p])\n", __func__, skb, sch, p);
-
- if (p->set_tc_index) {
- int wlen = skb_network_offset(skb);
-
- switch (skb_protocol(skb, true)) {
- case htons(ETH_P_IP):
- wlen += sizeof(struct iphdr);
- if (!pskb_may_pull(skb, wlen) ||
- skb_try_make_writable(skb, wlen))
- goto drop;
-
- skb->tc_index = ipv4_get_dsfield(ip_hdr(skb))
- & ~INET_ECN_MASK;
- break;
-
- case htons(ETH_P_IPV6):
- wlen += sizeof(struct ipv6hdr);
- if (!pskb_may_pull(skb, wlen) ||
- skb_try_make_writable(skb, wlen))
- goto drop;
-
- skb->tc_index = ipv6_get_dsfield(ipv6_hdr(skb))
- & ~INET_ECN_MASK;
- break;
- default:
- skb->tc_index = 0;
- break;
- }
- }
-
- if (TC_H_MAJ(skb->priority) == sch->handle)
- skb->tc_index = TC_H_MIN(skb->priority);
- else {
- struct tcf_result res;
- struct tcf_proto *fl = rcu_dereference_bh(p->filter_list);
- int result = tcf_classify(skb, fl, &res, false);
-
- pr_debug("result %d class 0x%04x\n", result, res.classid);
-
- switch (result) {
-#ifdef CONFIG_NET_CLS_ACT
- case TC_ACT_QUEUED:
- case TC_ACT_STOLEN:
- case TC_ACT_TRAP:
- __qdisc_drop(skb, to_free);
- return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
-
- case TC_ACT_SHOT:
- goto drop;
-#endif
- case TC_ACT_OK:
- skb->tc_index = TC_H_MIN(res.classid);
- break;
-
- default:
- if (p->default_index != NO_DEFAULT_INDEX)
- skb->tc_index = p->default_index;
- break;
- }
- }
-
- err = qdisc_enqueue(skb, p->q, to_free);
- if (err != NET_XMIT_SUCCESS) {
- if (net_xmit_drop_count(err))
- qdisc_qstats_drop(sch);
- return err;
- }
-
- sch->qstats.backlog += len;
- sch->q.qlen++;
-
- return NET_XMIT_SUCCESS;
-
-drop:
- qdisc_drop(skb, sch, to_free);
- return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS;
-}
-
-static struct sk_buff *dsmark_dequeue(struct Qdisc *sch)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- struct sk_buff *skb;
- u32 index;
-
- pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
-
- skb = qdisc_dequeue_peeked(p->q);
- if (skb == NULL)
- return NULL;
-
- qdisc_bstats_update(sch, skb);
- qdisc_qstats_backlog_dec(sch, skb);
- sch->q.qlen--;
-
- index = skb->tc_index & (p->indices - 1);
- pr_debug("index %d->%d\n", skb->tc_index, index);
-
- switch (skb_protocol(skb, true)) {
- case htons(ETH_P_IP):
- ipv4_change_dsfield(ip_hdr(skb), p->mv[index].mask,
- p->mv[index].value);
- break;
- case htons(ETH_P_IPV6):
- ipv6_change_dsfield(ipv6_hdr(skb), p->mv[index].mask,
- p->mv[index].value);
- break;
- default:
- /*
- * Only complain if a change was actually attempted.
- * This way, we can send non-IP traffic through dsmark
- * and don't need yet another qdisc as a bypass.
- */
- if (p->mv[index].mask != 0xff || p->mv[index].value)
- pr_warn("%s: unsupported protocol %d\n",
- __func__, ntohs(skb_protocol(skb, true)));
- break;
- }
-
- return skb;
-}
-
-static struct sk_buff *dsmark_peek(struct Qdisc *sch)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
-
- pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
-
- return p->q->ops->peek(p->q);
-}
-
-static int dsmark_init(struct Qdisc *sch, struct nlattr *opt,
- struct netlink_ext_ack *extack)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- struct nlattr *tb[TCA_DSMARK_MAX + 1];
- int err = -EINVAL;
- u32 default_index = NO_DEFAULT_INDEX;
- u16 indices;
- int i;
-
- pr_debug("%s(sch %p,[qdisc %p],opt %p)\n", __func__, sch, p, opt);
-
- if (!opt)
- goto errout;
-
- err = tcf_block_get(&p->block, &p->filter_list, sch, extack);
- if (err)
- return err;
-
- err = nla_parse_nested_deprecated(tb, TCA_DSMARK_MAX, opt,
- dsmark_policy, NULL);
- if (err < 0)
- goto errout;
-
- err = -EINVAL;
- if (!tb[TCA_DSMARK_INDICES])
- goto errout;
- indices = nla_get_u16(tb[TCA_DSMARK_INDICES]);
-
- if (hweight32(indices) != 1)
- goto errout;
-
- if (tb[TCA_DSMARK_DEFAULT_INDEX])
- default_index = nla_get_u16(tb[TCA_DSMARK_DEFAULT_INDEX]);
-
- if (indices <= DSMARK_EMBEDDED_SZ)
- p->mv = p->embedded;
- else
- p->mv = kmalloc_array(indices, sizeof(*p->mv), GFP_KERNEL);
- if (!p->mv) {
- err = -ENOMEM;
- goto errout;
- }
- for (i = 0; i < indices; i++) {
- p->mv[i].mask = 0xff;
- p->mv[i].value = 0;
- }
- p->indices = indices;
- p->default_index = default_index;
- p->set_tc_index = nla_get_flag(tb[TCA_DSMARK_SET_TC_INDEX]);
-
- p->q = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops, sch->handle,
- NULL);
- if (p->q == NULL)
- p->q = &noop_qdisc;
- else
- qdisc_hash_add(p->q, true);
-
- pr_debug("%s: qdisc %p\n", __func__, p->q);
-
- err = 0;
-errout:
- return err;
-}
-
-static void dsmark_reset(struct Qdisc *sch)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
-
- pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
- if (p->q)
- qdisc_reset(p->q);
-}
-
-static void dsmark_destroy(struct Qdisc *sch)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
-
- pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
-
- tcf_block_put(p->block);
- qdisc_put(p->q);
- if (p->mv != p->embedded)
- kfree(p->mv);
-}
-
-static int dsmark_dump_class(struct Qdisc *sch, unsigned long cl,
- struct sk_buff *skb, struct tcmsg *tcm)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- struct nlattr *opts = NULL;
-
- pr_debug("%s(sch %p,[qdisc %p],class %ld\n", __func__, sch, p, cl);
-
- if (!dsmark_valid_index(p, cl))
- return -EINVAL;
-
- tcm->tcm_handle = TC_H_MAKE(TC_H_MAJ(sch->handle), cl - 1);
- tcm->tcm_info = p->q->handle;
-
- opts = nla_nest_start_noflag(skb, TCA_OPTIONS);
- if (opts == NULL)
- goto nla_put_failure;
- if (nla_put_u8(skb, TCA_DSMARK_MASK, p->mv[cl - 1].mask) ||
- nla_put_u8(skb, TCA_DSMARK_VALUE, p->mv[cl - 1].value))
- goto nla_put_failure;
-
- return nla_nest_end(skb, opts);
-
-nla_put_failure:
- nla_nest_cancel(skb, opts);
- return -EMSGSIZE;
-}
-
-static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb)
-{
- struct dsmark_qdisc_data *p = qdisc_priv(sch);
- struct nlattr *opts = NULL;
-
- opts = nla_nest_start_noflag(skb, TCA_OPTIONS);
- if (opts == NULL)
- goto nla_put_failure;
- if (nla_put_u16(skb, TCA_DSMARK_INDICES, p->indices))
- goto nla_put_failure;
-
- if (p->default_index != NO_DEFAULT_INDEX &&
- nla_put_u16(skb, TCA_DSMARK_DEFAULT_INDEX, p->default_index))
- goto nla_put_failure;
-
- if (p->set_tc_index &&
- nla_put_flag(skb, TCA_DSMARK_SET_TC_INDEX))
- goto nla_put_failure;
-
- return nla_nest_end(skb, opts);
-
-nla_put_failure:
- nla_nest_cancel(skb, opts);
- return -EMSGSIZE;
-}
-
-static const struct Qdisc_class_ops dsmark_class_ops = {
- .graft = dsmark_graft,
- .leaf = dsmark_leaf,
- .find = dsmark_find,
- .change = dsmark_change,
- .delete = dsmark_delete,
- .walk = dsmark_walk,
- .tcf_block = dsmark_tcf_block,
- .bind_tcf = dsmark_bind_filter,
- .unbind_tcf = dsmark_unbind_filter,
- .dump = dsmark_dump_class,
-};
-
-static struct Qdisc_ops dsmark_qdisc_ops __read_mostly = {
- .next = NULL,
- .cl_ops = &dsmark_class_ops,
- .id = "dsmark",
- .priv_size = sizeof(struct dsmark_qdisc_data),
- .enqueue = dsmark_enqueue,
- .dequeue = dsmark_dequeue,
- .peek = dsmark_peek,
- .init = dsmark_init,
- .reset = dsmark_reset,
- .destroy = dsmark_destroy,
- .change = NULL,
- .dump = dsmark_dump,
- .owner = THIS_MODULE,
-};
-
-static int __init dsmark_module_init(void)
-{
- return register_qdisc(&dsmark_qdisc_ops);
-}
-
-static void __exit dsmark_module_exit(void)
-{
- unregister_qdisc(&dsmark_qdisc_ops);
-}
-
-module_init(dsmark_module_init)
-module_exit(dsmark_module_exit)
-
-MODULE_LICENSE("GPL");
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 004/122] smb: client: fix OOB in receive_encrypted_standard()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 003/122] net/sched: Retire dsmark qdisc Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 005/122] smb: client: fix potential OOBs in smb2_parse_contexts() Greg Kroah-Hartman
` (123 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Morris,
Paulo Alcantara (SUSE), Steve French, Guruswamy Basavaiah
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit eec04ea119691e65227a97ce53c0da6b9b74b0b7 ]
Fix potential OOB in receive_encrypted_standard() if server returned a
large shdr->NextCommand that would end up writing off the end of
@next_buffer.
Fixes: b24df3e30cbf ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Guru: receive_encrypted_standard() is present in file smb2ops.c,
smb2ops.c file location is changed, modified patch accordingly.]
Signed-off-by: Guruswamy Basavaiah <guruswamy.basavaiah@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2ops.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -4892,6 +4892,7 @@ receive_encrypted_standard(struct TCP_Se
struct smb2_sync_hdr *shdr;
unsigned int pdu_length = server->pdu_size;
unsigned int buf_size;
+ unsigned int next_cmd;
struct mid_q_entry *mid_entry;
int next_is_large;
char *next_buffer = NULL;
@@ -4920,14 +4921,15 @@ receive_encrypted_standard(struct TCP_Se
next_is_large = server->large_buf;
one_more:
shdr = (struct smb2_sync_hdr *)buf;
- if (shdr->NextCommand) {
+ next_cmd = le32_to_cpu(shdr->NextCommand);
+ if (next_cmd) {
+ if (WARN_ON_ONCE(next_cmd > pdu_length))
+ return -1;
if (next_is_large)
next_buffer = (char *)cifs_buf_get();
else
next_buffer = (char *)cifs_small_buf_get();
- memcpy(next_buffer,
- buf + le32_to_cpu(shdr->NextCommand),
- pdu_length - le32_to_cpu(shdr->NextCommand));
+ memcpy(next_buffer, buf + next_cmd, pdu_length - next_cmd);
}
mid_entry = smb2_find_mid(server, buf);
@@ -4951,8 +4953,8 @@ one_more:
else
ret = cifs_handle_standard(server, mid_entry);
- if (ret == 0 && shdr->NextCommand) {
- pdu_length -= le32_to_cpu(shdr->NextCommand);
+ if (ret == 0 && next_cmd) {
+ pdu_length -= next_cmd;
server->large_buf = next_is_large;
if (next_is_large)
server->bigbuf = buf = next_buffer;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 005/122] smb: client: fix potential OOBs in smb2_parse_contexts()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 004/122] smb: client: fix OOB in receive_encrypted_standard() Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 006/122] smb: client: fix parsing of SMB3.1.1 POSIX create context Greg Kroah-Hartman
` (122 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Robert Morris,
Paulo Alcantara (SUSE), Steve French, Guruswamy Basavaiah
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit af1689a9b7701d9907dfc84d2a4b57c4bc907144 ]
Validate offsets and lengths before dereferencing create contexts in
smb2_parse_contexts().
This fixes following oops when accessing invalid create contexts from
server:
BUG: unable to handle page fault for address: ffff8881178d8cc3
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4a01067 P4D 4a01067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs]
Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00
00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7
7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00
RSP: 0018:ffffc900007939e0 EFLAGS: 00010216
RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90
RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000
RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000
R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000
R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22
FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x181/0x480
? search_module_extables+0x19/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x1b6/0x1c0
? asm_exc_page_fault+0x26/0x30
? smb2_parse_contexts+0xa0/0x3a0 [cifs]
SMB2_open+0x38d/0x5f0 [cifs]
? smb2_is_path_accessible+0x138/0x260 [cifs]
smb2_is_path_accessible+0x138/0x260 [cifs]
cifs_is_path_remote+0x8d/0x230 [cifs]
cifs_mount+0x7e/0x350 [cifs]
cifs_smb3_do_mount+0x128/0x780 [cifs]
smb3_get_tree+0xd9/0x290 [cifs]
vfs_get_tree+0x2c/0x100
? capable+0x37/0x70
path_mount+0x2d7/0xb80
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__x64_sys_mount+0x11a/0x150
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f8737657b1e
Reported-by: Robert Morris <rtm@csail.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Guru: Removed changes to cached_dir.c and checking return value
of smb2_parse_contexts in smb2ops.c]
Signed-off-by: Guruswamy Basavaiah <guruswamy.basavaiah@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2ops.c | 4 +-
fs/cifs/smb2pdu.c | 91 +++++++++++++++++++++++++++++++---------------------
fs/cifs/smb2proto.h | 12 ++++--
3 files changed, 65 insertions(+), 42 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -818,10 +818,12 @@ int open_shroot(unsigned int xid, struct
if (o_rsp->OplockLevel == SMB2_OPLOCK_LEVEL_LEASE) {
kref_get(&tcon->crfid.refcount);
tcon->crfid.has_lease = true;
- smb2_parse_contexts(server, o_rsp,
+ rc = smb2_parse_contexts(server, rsp_iov,
&oparms.fid->epoch,
oparms.fid->lease_key, &oplock,
NULL, NULL);
+ if (rc)
+ goto oshr_exit;
} else
goto oshr_exit;
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1991,17 +1991,18 @@ parse_posix_ctxt(struct create_context *
posix->nlink, posix->mode, posix->reparse_tag);
}
-void
-smb2_parse_contexts(struct TCP_Server_Info *server,
- struct smb2_create_rsp *rsp,
- unsigned int *epoch, char *lease_key, __u8 *oplock,
- struct smb2_file_all_info *buf,
- struct create_posix_rsp *posix)
+int smb2_parse_contexts(struct TCP_Server_Info *server,
+ struct kvec *rsp_iov,
+ unsigned int *epoch,
+ char *lease_key, __u8 *oplock,
+ struct smb2_file_all_info *buf,
+ struct create_posix_rsp *posix)
{
- char *data_offset;
+ struct smb2_create_rsp *rsp = rsp_iov->iov_base;
struct create_context *cc;
- unsigned int next;
- unsigned int remaining;
+ size_t rem, off, len;
+ size_t doff, dlen;
+ size_t noff, nlen;
char *name;
static const char smb3_create_tag_posix[] = {
0x93, 0xAD, 0x25, 0x50, 0x9C,
@@ -2010,45 +2011,63 @@ smb2_parse_contexts(struct TCP_Server_In
};
*oplock = 0;
- data_offset = (char *)rsp + le32_to_cpu(rsp->CreateContextsOffset);
- remaining = le32_to_cpu(rsp->CreateContextsLength);
- cc = (struct create_context *)data_offset;
+
+ off = le32_to_cpu(rsp->CreateContextsOffset);
+ rem = le32_to_cpu(rsp->CreateContextsLength);
+ if (check_add_overflow(off, rem, &len) || len > rsp_iov->iov_len)
+ return -EINVAL;
+ cc = (struct create_context *)((u8 *)rsp + off);
/* Initialize inode number to 0 in case no valid data in qfid context */
if (buf)
buf->IndexNumber = 0;
- while (remaining >= sizeof(struct create_context)) {
- name = le16_to_cpu(cc->NameOffset) + (char *)cc;
- if (le16_to_cpu(cc->NameLength) == 4 &&
- strncmp(name, SMB2_CREATE_REQUEST_LEASE, 4) == 0)
- *oplock = server->ops->parse_lease_buf(cc, epoch,
- lease_key);
- else if (buf && (le16_to_cpu(cc->NameLength) == 4) &&
- strncmp(name, SMB2_CREATE_QUERY_ON_DISK_ID, 4) == 0)
- parse_query_id_ctxt(cc, buf);
- else if ((le16_to_cpu(cc->NameLength) == 16)) {
- if (posix &&
- memcmp(name, smb3_create_tag_posix, 16) == 0)
+ while (rem >= sizeof(*cc)) {
+ doff = le16_to_cpu(cc->DataOffset);
+ dlen = le32_to_cpu(cc->DataLength);
+ if (check_add_overflow(doff, dlen, &len) || len > rem)
+ return -EINVAL;
+
+ noff = le16_to_cpu(cc->NameOffset);
+ nlen = le16_to_cpu(cc->NameLength);
+ if (noff + nlen >= doff)
+ return -EINVAL;
+
+ name = (char *)cc + noff;
+ switch (nlen) {
+ case 4:
+ if (!strncmp(name, SMB2_CREATE_REQUEST_LEASE, 4)) {
+ *oplock = server->ops->parse_lease_buf(cc, epoch,
+ lease_key);
+ } else if (buf &&
+ !strncmp(name, SMB2_CREATE_QUERY_ON_DISK_ID, 4)) {
+ parse_query_id_ctxt(cc, buf);
+ }
+ break;
+ case 16:
+ if (posix && !memcmp(name, smb3_create_tag_posix, 16))
parse_posix_ctxt(cc, buf, posix);
+ break;
+ default:
+ cifs_dbg(FYI, "%s: unhandled context (nlen=%zu dlen=%zu)\n",
+ __func__, nlen, dlen);
+ if (IS_ENABLED(CONFIG_CIFS_DEBUG2))
+ cifs_dump_mem("context data: ", cc, dlen);
+ break;
}
- /* else {
- cifs_dbg(FYI, "Context not matched with len %d\n",
- le16_to_cpu(cc->NameLength));
- cifs_dump_mem("Cctxt name: ", name, 4);
- } */
- next = le32_to_cpu(cc->Next);
- if (!next)
+ off = le32_to_cpu(cc->Next);
+ if (!off)
break;
- remaining -= next;
- cc = (struct create_context *)((char *)cc + next);
+ if (check_sub_overflow(rem, off, &rem))
+ return -EINVAL;
+ cc = (struct create_context *)((u8 *)cc + off);
}
if (rsp->OplockLevel != SMB2_OPLOCK_LEVEL_LEASE)
*oplock = rsp->OplockLevel;
- return;
+ return 0;
}
static int
@@ -2915,8 +2934,8 @@ SMB2_open(const unsigned int xid, struct
}
- smb2_parse_contexts(server, rsp, &oparms->fid->epoch,
- oparms->fid->lease_key, oplock, buf, posix);
+ rc = smb2_parse_contexts(server, &rsp_iov, &oparms->fid->epoch,
+ oparms->fid->lease_key, oplock, buf, posix);
creat_exit:
SMB2_open_free(&rqst);
free_rsp_buf(resp_buftype, rsp);
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -270,11 +270,13 @@ extern int smb3_validate_negotiate(const
extern enum securityEnum smb2_select_sectype(struct TCP_Server_Info *,
enum securityEnum);
-extern void smb2_parse_contexts(struct TCP_Server_Info *server,
- struct smb2_create_rsp *rsp,
- unsigned int *epoch, char *lease_key,
- __u8 *oplock, struct smb2_file_all_info *buf,
- struct create_posix_rsp *posix);
+int smb2_parse_contexts(struct TCP_Server_Info *server,
+ struct kvec *rsp_iov,
+ unsigned int *epoch,
+ char *lease_key, __u8 *oplock,
+ struct smb2_file_all_info *buf,
+ struct create_posix_rsp *posix);
+
extern int smb3_encryption_required(const struct cifs_tcon *tcon);
extern int smb2_validate_iov(unsigned int offset, unsigned int buffer_length,
struct kvec *iov, unsigned int min_buf_size);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 006/122] smb: client: fix parsing of SMB3.1.1 POSIX create context
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 005/122] smb: client: fix potential OOBs in smb2_parse_contexts() Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 007/122] sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset Greg Kroah-Hartman
` (121 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paulo Alcantara, Steve French,
Guruswamy Basavaiah
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit 76025cc2285d9ede3d717fe4305d66f8be2d9346 ]
The data offset for the SMB3.1.1 POSIX create context will always be
8-byte aligned so having the check 'noff + nlen >= doff' in
smb2_parse_contexts() is wrong as it will lead to -EINVAL because noff
+ nlen == doff.
Fix the sanity check to correctly handle aligned create context data.
Fixes: af1689a9b770 ("smb: client: fix potential OOBs in smb2_parse_contexts()")
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Guru:smb2_parse_contexts() is present in file smb2ops.c,
smb2ops.c file location is changed, modified patch accordingly.]
Signed-off-by: Guruswamy Basavaiah <guruswamy.basavaiah@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2pdu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2030,7 +2030,7 @@ int smb2_parse_contexts(struct TCP_Serve
noff = le16_to_cpu(cc->NameOffset);
nlen = le16_to_cpu(cc->NameLength);
- if (noff + nlen >= doff)
+ if (noff + nlen > doff)
return -EINVAL;
name = (char *)cc + noff;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 007/122] sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 006/122] smb: client: fix parsing of SMB3.1.1 POSIX create context Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 008/122] userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb Greg Kroah-Hartman
` (120 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cyril Hrubis, Peter Zijlstra (Intel),
Petr Vorel, Mel Gorman, Mahmoud Adam
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cyril Hrubis <chrubis@suse.cz>
commit c1fc6484e1fb7cc2481d169bfef129a1b0676abe upstream.
The sched_rr_timeslice can be reset to default by writing value that is
<= 0. However after reading from this file we always got the last value
written, which is not useful at all.
$ echo -1 > /proc/sys/kernel/sched_rr_timeslice_ms
$ cat /proc/sys/kernel/sched_rr_timeslice_ms
-1
Fix this by setting the variable that holds the sysctl file value to the
jiffies_to_msecs(RR_TIMESLICE) in case that <= 0 value was written.
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Petr Vorel <pvorel@suse.cz>
Cc: Mahmoud Adam <mngyadam@amazon.com>
Link: https://lore.kernel.org/r/20230802151906.25258-3-chrubis@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/rt.c | 3 +++
1 file changed, 3 insertions(+)
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2804,6 +2804,9 @@ int sched_rr_handler(struct ctl_table *t
sched_rr_timeslice =
sysctl_sched_rr_timeslice <= 0 ? RR_TIMESLICE :
msecs_to_jiffies(sysctl_sched_rr_timeslice);
+
+ if (sysctl_sched_rr_timeslice <= 0)
+ sysctl_sched_rr_timeslice = jiffies_to_msecs(RR_TIMESLICE);
}
mutex_unlock(&mutex);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 008/122] userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 007/122] sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 009/122] zonefs: Improve error handling Greg Kroah-Hartman
` (119 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lokesh Gidra, Andrea Arcangeli,
Mike Rapoport, Axel Rasmussen, Brian Geffon, David Hildenbrand,
Jann Horn, Kalesh Singh, Matthew Wilcox (Oracle),
Nicolas Geoffray, Peter Xu, Suren Baghdasaryan, Andrew Morton
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lokesh Gidra <lokeshgidra@google.com>
commit 67695f18d55924b2013534ef3bdc363bc9e14605 upstream.
In mfill_atomic_hugetlb(), mmap_changing isn't being checked
again if we drop mmap_lock and reacquire it. When the lock is not held,
mmap_changing could have been incremented. This is also inconsistent
with the behavior in mfill_atomic().
Link: https://lkml.kernel.org/r/20240117223729.1444522-1-lokeshgidra@google.com
Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races")
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/userfaultfd.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -209,6 +209,7 @@ static __always_inline ssize_t __mcopy_a
unsigned long dst_start,
unsigned long src_start,
unsigned long len,
+ bool *mmap_changing,
bool zeropage)
{
int vm_alloc_shared = dst_vma->vm_flags & VM_SHARED;
@@ -329,6 +330,15 @@ retry:
goto out;
}
mmap_read_lock(dst_mm);
+ /*
+ * If memory mappings are changing because of non-cooperative
+ * operation (e.g. mremap) running in parallel, bail out and
+ * request the user to retry later
+ */
+ if (mmap_changing && READ_ONCE(*mmap_changing)) {
+ err = -EAGAIN;
+ break;
+ }
dst_vma = NULL;
goto retry;
@@ -410,6 +420,7 @@ extern ssize_t __mcopy_atomic_hugetlb(st
unsigned long dst_start,
unsigned long src_start,
unsigned long len,
+ bool *mmap_changing,
bool zeropage);
#endif /* CONFIG_HUGETLB_PAGE */
@@ -529,7 +540,8 @@ retry:
*/
if (is_vm_hugetlb_page(dst_vma))
return __mcopy_atomic_hugetlb(dst_mm, dst_vma, dst_start,
- src_start, len, zeropage);
+ src_start, len, mmap_changing,
+ zeropage);
if (!vma_is_anonymous(dst_vma) && !vma_is_shmem(dst_vma))
goto out_unlock;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 009/122] zonefs: Improve error handling
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 008/122] userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 010/122] sched/rt: Fix sysctl_sched_rr_timeslice intial value Greg Kroah-Hartman
` (118 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shinichiro Kawasaki, Damien Le Moal,
Johannes Thumshirn, Himanshu Madhani
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal <dlemoal@kernel.org>
commit 14db5f64a971fce3d8ea35de4dfc7f443a3efb92 upstream.
Write error handling is racy and can sometime lead to the error recovery
path wrongly changing the inode size of a sequential zone file to an
incorrect value which results in garbage data being readable at the end
of a file. There are 2 problems:
1) zonefs_file_dio_write() updates a zone file write pointer offset
after issuing a direct IO with iomap_dio_rw(). This update is done
only if the IO succeed for synchronous direct writes. However, for
asynchronous direct writes, the update is done without waiting for
the IO completion so that the next asynchronous IO can be
immediately issued. However, if an asynchronous IO completes with a
failure right before the i_truncate_mutex lock protecting the update,
the update may change the value of the inode write pointer offset
that was corrected by the error path (zonefs_io_error() function).
2) zonefs_io_error() is called when a read or write error occurs. This
function executes a report zone operation using the callback function
zonefs_io_error_cb(), which does all the error recovery handling
based on the current zone condition, write pointer position and
according to the mount options being used. However, depending on the
zoned device being used, a report zone callback may be executed in a
context that is different from the context of __zonefs_io_error(). As
a result, zonefs_io_error_cb() may be executed without the inode
truncate mutex lock held, which can lead to invalid error processing.
Fix both problems as follows:
- Problem 1: Perform the inode write pointer offset update before a
direct write is issued with iomap_dio_rw(). This is safe to do as
partial direct writes are not supported (IOMAP_DIO_PARTIAL is not
set) and any failed IO will trigger the execution of zonefs_io_error()
which will correct the inode write pointer offset to reflect the
current state of the one on the device.
- Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error()
and call this function directly from __zonefs_io_error() after
obtaining the zone information using blkdev_report_zones() with a
simple callback function that copies to a local stack variable the
struct blk_zone obtained from the device. This ensures that error
handling is performed holding the inode truncate mutex.
This change also simplifies error handling for conventional zone files
by bypassing the execution of report zones entirely. This is safe to
do because the condition of conventional zones cannot be read-only or
offline and conventional zone files are always fully mapped with a
constant file size.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/zonefs/super.c | 70 ++++++++++++++++++++++++++++++------------------------
1 file changed, 40 insertions(+), 30 deletions(-)
--- a/fs/zonefs/super.c
+++ b/fs/zonefs/super.c
@@ -319,16 +319,18 @@ static loff_t zonefs_check_zone_conditio
}
}
-struct zonefs_ioerr_data {
- struct inode *inode;
- bool write;
-};
-
static int zonefs_io_error_cb(struct blk_zone *zone, unsigned int idx,
void *data)
{
- struct zonefs_ioerr_data *err = data;
- struct inode *inode = err->inode;
+ struct blk_zone *z = data;
+
+ *z = *zone;
+ return 0;
+}
+
+static void zonefs_handle_io_error(struct inode *inode, struct blk_zone *zone,
+ bool write)
+{
struct zonefs_inode_info *zi = ZONEFS_I(inode);
struct super_block *sb = inode->i_sb;
struct zonefs_sb_info *sbi = ZONEFS_SB(sb);
@@ -344,8 +346,8 @@ static int zonefs_io_error_cb(struct blk
isize = i_size_read(inode);
if (zone->cond != BLK_ZONE_COND_OFFLINE &&
zone->cond != BLK_ZONE_COND_READONLY &&
- !err->write && isize == data_size)
- return 0;
+ !write && isize == data_size)
+ return;
/*
* At this point, we detected either a bad zone or an inconsistency
@@ -366,8 +368,9 @@ static int zonefs_io_error_cb(struct blk
* In all cases, warn about inode size inconsistency and handle the
* IO error according to the zone condition and to the mount options.
*/
- if (zi->i_ztype == ZONEFS_ZTYPE_SEQ && isize != data_size)
- zonefs_warn(sb, "inode %lu: invalid size %lld (should be %lld)\n",
+ if (isize != data_size)
+ zonefs_warn(sb,
+ "inode %lu: invalid size %lld (should be %lld)\n",
inode->i_ino, isize, data_size);
/*
@@ -427,8 +430,6 @@ static int zonefs_io_error_cb(struct blk
zonefs_update_stats(inode, data_size);
zonefs_i_size_write(inode, data_size);
zi->i_wpoffset = data_size;
-
- return 0;
}
/*
@@ -442,23 +443,25 @@ static void __zonefs_io_error(struct ino
{
struct zonefs_inode_info *zi = ZONEFS_I(inode);
struct super_block *sb = inode->i_sb;
- struct zonefs_sb_info *sbi = ZONEFS_SB(sb);
unsigned int noio_flag;
- unsigned int nr_zones = 1;
- struct zonefs_ioerr_data err = {
- .inode = inode,
- .write = write,
- };
+ struct blk_zone zone;
int ret;
/*
- * The only files that have more than one zone are conventional zone
- * files with aggregated conventional zones, for which the inode zone
- * size is always larger than the device zone size.
- */
- if (zi->i_zone_size > bdev_zone_sectors(sb->s_bdev))
- nr_zones = zi->i_zone_size >>
- (sbi->s_zone_sectors_shift + SECTOR_SHIFT);
+ * Conventional zone have no write pointer and cannot become read-only
+ * or offline. So simply fake a report for a single or aggregated zone
+ * and let zonefs_handle_io_error() correct the zone inode information
+ * according to the mount options.
+ */
+ if (zi->i_ztype != ZONEFS_ZTYPE_SEQ) {
+ zone.start = zi->i_zsector;
+ zone.len = zi->i_max_size >> SECTOR_SHIFT;
+ zone.wp = zone.start + zone.len;
+ zone.type = BLK_ZONE_TYPE_CONVENTIONAL;
+ zone.cond = BLK_ZONE_COND_NOT_WP;
+ zone.capacity = zone.len;
+ goto handle_io_error;
+ }
/*
* Memory allocations in blkdev_report_zones() can trigger a memory
@@ -469,12 +472,19 @@ static void __zonefs_io_error(struct ino
* the GFP_NOIO context avoids both problems.
*/
noio_flag = memalloc_noio_save();
- ret = blkdev_report_zones(sb->s_bdev, zi->i_zsector, nr_zones,
- zonefs_io_error_cb, &err);
- if (ret != nr_zones)
+ ret = blkdev_report_zones(sb->s_bdev, zi->i_zsector, 1,
+ zonefs_io_error_cb, &zone);
+ memalloc_noio_restore(noio_flag);
+ if (ret != 1) {
zonefs_err(sb, "Get inode %lu zone information failed %d\n",
inode->i_ino, ret);
- memalloc_noio_restore(noio_flag);
+ zonefs_warn(sb, "remounting filesystem read-only\n");
+ sb->s_flags |= SB_RDONLY;
+ return;
+ }
+
+handle_io_error:
+ zonefs_handle_io_error(inode, &zone, write);
}
static void zonefs_io_error(struct inode *inode, bool write)
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 010/122] sched/rt: Fix sysctl_sched_rr_timeslice intial value
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 009/122] zonefs: Improve error handling Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 011/122] sched/rt: Disallow writing invalid values to sched_rt_period_us Greg Kroah-Hartman
` (117 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Cyril Hrubis, Peter Zijlstra (Intel),
Petr Vorel, Mel Gorman
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cyril Hrubis <chrubis@suse.cz>
commit c7fcb99877f9f542c918509b2801065adcaf46fa upstream.
There is a 10% rounding error in the intial value of the
sysctl_sched_rr_timeslice with CONFIG_HZ_300=y.
This was found with LTP test sched_rr_get_interval01:
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
What this test does is to compare the return value from the
sched_rr_get_interval() and the sched_rr_timeslice_ms sysctl file and
fails if they do not match.
The problem it found is the intial sysctl file value which was computed as:
static int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;
which works fine as long as MSEC_PER_SEC is multiple of HZ, however it
introduces 10% rounding error for CONFIG_HZ_300:
(MSEC_PER_SEC / HZ) * (100 * HZ / 1000)
(1000 / 300) * (100 * 300 / 1000)
3 * 30 = 90
This can be easily fixed by reversing the order of the multiplication
and division. After this fix we get:
(MSEC_PER_SEC * (100 * HZ / 1000)) / HZ
(1000 * (100 * 300 / 1000)) / 300
(1000 * 30) / 300 = 100
Fixes: 975e155ed873 ("sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds")
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/r/20230802151906.25258-2-chrubis@suse.cz
[ pvorel: rebased for 5.15, 5.10 ]
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/rt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -8,7 +8,7 @@
#include "pelt.h"
int sched_rr_timeslice = RR_TIMESLICE;
-int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;
+int sysctl_sched_rr_timeslice = (MSEC_PER_SEC * RR_TIMESLICE) / HZ;
/* More than 4 hours if BW_SHIFT equals 20. */
static const u64 max_rt_runtime = MAX_BW;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 011/122] sched/rt: Disallow writing invalid values to sched_rt_period_us
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 010/122] sched/rt: Fix sysctl_sched_rr_timeslice intial value Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 012/122] scsi: target: core: Add TMF to tmr_list handling Greg Kroah-Hartman
` (116 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Cyril Hrubis, Ingo Molnar,
Petr Vorel
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cyril Hrubis <chrubis@suse.cz>
commit 079be8fc630943d9fc70a97807feb73d169ee3fc upstream.
The validation of the value written to sched_rt_period_us was broken
because:
- the sysclt_sched_rt_period is declared as unsigned int
- parsed by proc_do_intvec()
- the range is asserted after the value parsed by proc_do_intvec()
Because of this negative values written to the file were written into a
unsigned integer that were later on interpreted as large positive
integers which did passed the check:
if (sysclt_sched_rt_period <= 0)
return EINVAL;
This commit fixes the parsing by setting explicit range for both
perid_us and runtime_us into the sched_rt_sysctls table and processes
the values with proc_dointvec_minmax() instead.
Alternatively if we wanted to use full range of unsigned int for the
period value we would have to split the proc_handler and use
proc_douintvec() for it however even the
Documentation/scheduller/sched-rt-group.rst describes the range as 1 to
INT_MAX.
As far as I can tell the only problem this causes is that the sysctl
file allows writing negative values which when read back may confuse
userspace.
There is also a LTP test being submitted for these sysctl files at:
http://patchwork.ozlabs.org/project/ltp/patch/20230901144433.2526-1-chrubis@suse.cz/
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231002115553.3007-2-chrubis@suse.cz
[ pvorel: rebased for 5.15, 5.10 ]
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/rt.c | 5 +----
kernel/sysctl.c | 4 ++++
2 files changed, 5 insertions(+), 4 deletions(-)
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2727,9 +2727,6 @@ static int sched_rt_global_constraints(v
static int sched_rt_global_validate(void)
{
- if (sysctl_sched_rt_period <= 0)
- return -EINVAL;
-
if ((sysctl_sched_rt_runtime != RUNTIME_INF) &&
((sysctl_sched_rt_runtime > sysctl_sched_rt_period) ||
((u64)sysctl_sched_rt_runtime *
@@ -2760,7 +2757,7 @@ int sched_rt_handler(struct ctl_table *t
old_period = sysctl_sched_rt_period;
old_runtime = sysctl_sched_rt_runtime;
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (!ret && write) {
ret = sched_rt_global_validate();
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1859,6 +1859,8 @@ static struct ctl_table kern_table[] = {
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = sched_rt_handler,
+ .extra1 = SYSCTL_ONE,
+ .extra2 = SYSCTL_INT_MAX,
},
{
.procname = "sched_rt_runtime_us",
@@ -1866,6 +1868,8 @@ static struct ctl_table kern_table[] = {
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = sched_rt_handler,
+ .extra1 = SYSCTL_NEG_ONE,
+ .extra2 = SYSCTL_INT_MAX,
},
{
.procname = "sched_deadline_period_max_us",
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 012/122] scsi: target: core: Add TMF to tmr_list handling
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 011/122] sched/rt: Disallow writing invalid values to sched_rt_period_us Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 013/122] dmaengine: shdma: increase size of dev_id Greg Kroah-Hartman
` (115 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dmitry Bogdanov, Mike Christie,
Martin K. Petersen, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Bogdanov <d.bogdanov@yadro.com>
[ Upstream commit 83ab68168a3d990d5ff39ab030ad5754cbbccb25 ]
An abort that is responded to by iSCSI itself is added to tmr_list but does
not go to target core. A LUN_RESET that goes through tmr_list takes a
refcounter on the abort and waits for completion. However, the abort will
be never complete because it was not started in target core.
Unable to locate ITT: 0x05000000 on CID: 0
Unable to locate RefTaskTag: 0x05000000 on CID: 0.
wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
...
INFO: task kworker/0:2:49 blocked for more than 491 seconds.
task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800
Workqueue: events target_tmr_work [target_core_mod]
Call Trace:
__switch_to+0x2c4/0x470
_schedule+0x314/0x1730
schedule+0x64/0x130
schedule_timeout+0x168/0x430
wait_for_completion+0x140/0x270
target_put_cmd_and_wait+0x64/0xb0 [target_core_mod]
core_tmr_lun_reset+0x30/0xa0 [target_core_mod]
target_tmr_work+0xc8/0x1b0 [target_core_mod]
process_one_work+0x2d4/0x5d0
worker_thread+0x78/0x6c0
To fix this, only add abort to tmr_list if it will be handled by target
core.
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20240111125941.8688-1-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/target/target_core_device.c | 5 -----
drivers/target/target_core_transport.c | 4 ++++
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 9aeedcff7d02e..daa4d06ce2336 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -150,7 +150,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd)
struct se_session *se_sess = se_cmd->se_sess;
struct se_node_acl *nacl = se_sess->se_node_acl;
struct se_tmr_req *se_tmr = se_cmd->se_tmr_req;
- unsigned long flags;
rcu_read_lock();
deve = target_nacl_find_deve(nacl, se_cmd->orig_fe_lun);
@@ -181,10 +180,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd)
se_cmd->se_dev = rcu_dereference_raw(se_lun->lun_se_dev);
se_tmr->tmr_dev = rcu_dereference_raw(se_lun->lun_se_dev);
- spin_lock_irqsave(&se_tmr->tmr_dev->se_tmr_lock, flags);
- list_add_tail(&se_tmr->tmr_list, &se_tmr->tmr_dev->dev_tmr_list);
- spin_unlock_irqrestore(&se_tmr->tmr_dev->se_tmr_lock, flags);
-
return 0;
}
EXPORT_SYMBOL(transport_lookup_tmr_lun);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 2e97937f005ff..8d294b658592c 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3436,6 +3436,10 @@ int transport_generic_handle_tmr(
unsigned long flags;
bool aborted = false;
+ spin_lock_irqsave(&cmd->se_dev->se_tmr_lock, flags);
+ list_add_tail(&cmd->se_tmr_req->tmr_list, &cmd->se_dev->dev_tmr_list);
+ spin_unlock_irqrestore(&cmd->se_dev->se_tmr_lock, flags);
+
spin_lock_irqsave(&cmd->t_state_lock, flags);
if (cmd->transport_state & CMD_T_ABORTED) {
aborted = true;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 013/122] dmaengine: shdma: increase size of dev_id
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 012/122] scsi: target: core: Add TMF to tmr_list handling Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 014/122] dmaengine: fsl-qdma: increase size of irq_name Greg Kroah-Hartman
` (114 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Vinod Koul, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinod Koul <vkoul@kernel.org>
[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ]
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'
drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~
In function ‘sh_dmae_chan_probe’,
inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
541 | "sh-dmae%d.%d", pdev->id, id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/sh/shdma.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h
index 9c121a4b33ad8..f97d80343aea4 100644
--- a/drivers/dma/sh/shdma.h
+++ b/drivers/dma/sh/shdma.h
@@ -25,7 +25,7 @@ struct sh_dmae_chan {
const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
int xmit_shift; /* log_2(bytes_per_xfer) */
void __iomem *base;
- char dev_id[16]; /* unique name per DMAC of channel */
+ char dev_id[32]; /* unique name per DMAC of channel */
int pm_error;
dma_addr_t slave_addr;
};
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 014/122] dmaengine: fsl-qdma: increase size of irq_name
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 013/122] dmaengine: shdma: increase size of dev_id Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 015/122] wifi: cfg80211: fix missing interfaces when dumping Greg Kroah-Hartman
` (113 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Vinod Koul, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinod Koul <vkoul@kernel.org>
[ Upstream commit 6386f6c995b3ab91c72cfb76e4465553c555a8da ]
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'
drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/fsl-qdma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
index 69385f32e2756..f383f219ed008 100644
--- a/drivers/dma/fsl-qdma.c
+++ b/drivers/dma/fsl-qdma.c
@@ -805,7 +805,7 @@ fsl_qdma_irq_init(struct platform_device *pdev,
int i;
int cpu;
int ret;
- char irq_name[20];
+ char irq_name[32];
fsl_qdma->error_irq =
platform_get_irq_byname(pdev, "qdma-error");
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 015/122] wifi: cfg80211: fix missing interfaces when dumping
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 014/122] dmaengine: fsl-qdma: increase size of irq_name Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 016/122] wifi: mac80211: fix race condition on enabling fast-xmit Greg Kroah-Hartman
` (112 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michal Kazior, Johannes Berg,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Kazior <michal@plume.com>
[ Upstream commit a6e4f85d3820d00694ed10f581f4c650445dbcda ]
The nl80211_dump_interface() supports resumption
in case nl80211_send_iface() doesn't have the
resources to complete its work.
The logic would store the progress as iteration
offsets for rdev and wdev loops.
However the logic did not properly handle
resumption for non-last rdev. Assuming a system
with 2 rdevs, with 2 wdevs each, this could
happen:
dump(cb=[0, 0]):
if_start=cb[1] (=0)
send rdev0.wdev0 -> ok
send rdev0.wdev1 -> yield
cb[1] = 1
dump(cb=[0, 1]):
if_start=cb[1] (=1)
send rdev0.wdev1 -> ok
// since if_start=1 the rdev0.wdev0 got skipped
// through if_idx < if_start
send rdev1.wdev1 -> ok
The if_start needs to be reset back to 0 upon wdev
loop end.
The problem is actually hard to hit on a desktop,
and even on most routers. The prerequisites for
this manifesting was:
- more than 1 wiphy
- a few handful of interfaces
- dump without rdev or wdev filter
I was seeing this with 4 wiphys 9 interfaces each.
It'd miss 6 interfaces from the last wiphy
reported to userspace.
Signed-off-by: Michal Kazior <michal@plume.com>
Link: https://msgid.link/20240116142340.89678-1-kazikcz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/wireless/nl80211.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0ac829c8f1888..279f4977e2eed 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3595,6 +3595,7 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
if_idx++;
}
+ if_start = 0;
wp_idx++;
}
out:
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 016/122] wifi: mac80211: fix race condition on enabling fast-xmit
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 015/122] wifi: cfg80211: fix missing interfaces when dumping Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 017/122] fbdev: savage: Error out if pixclock equals zero Greg Kroah-Hartman
` (111 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Felix Fietkau, Johannes Berg,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <nbd@nbd.name>
[ Upstream commit bcbc84af1183c8cf3d1ca9b78540c2185cd85e7f ]
fast-xmit must only be enabled after the sta has been uploaded to the driver,
otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls
to the driver, leading to potential crashes because of uninitialized drv_priv
data.
Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240104181059.84032-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/mac80211/sta_info.c | 2 ++
net/mac80211/tx.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 2e84360990f0c..44bd03c6b8473 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -700,6 +700,8 @@ static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU)
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_accept_plinks_update(sdata);
+ ieee80211_check_fast_xmit(sta);
+
return 0;
out_remove:
sta_info_hash_del(local, sta);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 55abc06214c4d..0d6d12fc3c07e 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2959,7 +2959,7 @@ void ieee80211_check_fast_xmit(struct sta_info *sta)
sdata->vif.type == NL80211_IFTYPE_STATION)
goto out;
- if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED))
+ if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED) || !sta->uploaded)
goto out;
if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 017/122] fbdev: savage: Error out if pixclock equals zero
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 016/122] wifi: mac80211: fix race condition on enabling fast-xmit Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 018/122] fbdev: sis: " Greg Kroah-Hartman
` (110 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Fullway Wang, Helge Deller,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fullway Wang <fullwaywang@outlook.com>
[ Upstream commit 04e5eac8f3ab2ff52fa191c187a46d4fdbc1e288 ]
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
Although pixclock is checked in savagefb_decode_var(), but it is not
checked properly in savagefb_probe(). Fix this by checking whether
pixclock is zero in the function savagefb_check_var() before
info->var.pixclock is used as the divisor.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/savage/savagefb_driver.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
index 0ac750cc5ea13..94ebd8af50cf7 100644
--- a/drivers/video/fbdev/savage/savagefb_driver.c
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
@@ -868,6 +868,9 @@ static int savagefb_check_var(struct fb_var_screeninfo *var,
DBG("savagefb_check_var");
+ if (!var->pixclock)
+ return -EINVAL;
+
var->transp.offset = 0;
var->transp.length = 0;
switch (var->bits_per_pixel) {
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 018/122] fbdev: sis: Error out if pixclock equals zero
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 017/122] fbdev: savage: Error out if pixclock equals zero Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 019/122] spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected Greg Kroah-Hartman
` (109 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Fullway Wang, Helge Deller,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fullway Wang <fullwaywang@outlook.com>
[ Upstream commit e421946be7d9bf545147bea8419ef8239cb7ca52 ]
The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of pixclock,
it may cause divide-by-zero error.
In sisfb_check_var(), var->pixclock is used as a divisor to caculate
drate before it is checked against zero. Fix this by checking it
at the beginning.
This is similar to CVE-2022-3061 in i740fb which was fixed by
commit 15cf0b8.
Signed-off-by: Fullway Wang <fullwaywang@outlook.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/sis/sis_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/video/fbdev/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
index 03c736f6f3d08..e540cb0c51726 100644
--- a/drivers/video/fbdev/sis/sis_main.c
+++ b/drivers/video/fbdev/sis/sis_main.c
@@ -1474,6 +1474,8 @@ sisfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
vtotal = var->upper_margin + var->lower_margin + var->vsync_len;
+ if (!var->pixclock)
+ return -EINVAL;
pixclock = var->pixclock;
if((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED) {
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 019/122] spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 018/122] fbdev: sis: " Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 020/122] ahci: asm1166: correct count of reported ports Greg Kroah-Hartman
` (108 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Devyn Liu, Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Devyn Liu <liudingyuan@huawei.com>
[ Upstream commit de8b6e1c231a95abf95ad097b993d34b31458ec9 ]
Return IRQ_NONE from the interrupt handler when no interrupt was
detected. Because an empty interrupt will cause a null pointer error:
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
complete+0x54/0x100
hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx]
__handle_irq_event_percpu+0x64/0x1e0
handle_irq_event+0x7c/0x1cc
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-hisi-sfc-v3xx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c
index 4650b483a33d3..e0c3ad73c576d 100644
--- a/drivers/spi/spi-hisi-sfc-v3xx.c
+++ b/drivers/spi/spi-hisi-sfc-v3xx.c
@@ -365,6 +365,11 @@ static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = {
static irqreturn_t hisi_sfc_v3xx_isr(int irq, void *data)
{
struct hisi_sfc_v3xx_host *host = data;
+ u32 reg;
+
+ reg = readl(host->regbase + HISI_SFC_V3XX_INT_STAT);
+ if (!reg)
+ return IRQ_NONE;
hisi_sfc_v3xx_disable_int(host);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 020/122] ahci: asm1166: correct count of reported ports
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 019/122] spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 021/122] ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers Greg Kroah-Hartman
` (107 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Conrad Kostecki, Hans de Goede,
Niklas Cassel, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Conrad Kostecki <conikost@gentoo.org>
[ Upstream commit 0077a504e1a4468669fd2e011108db49133db56e ]
The ASM1166 SATA host controller always reports wrongly,
that it has 32 ports. But in reality, it only has six ports.
This seems to be a hardware issue, as all tested ASM1166
SATA host controllers reports such high count of ports.
Example output: ahci 0000:09:00.0: AHCI 0001.0301
32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode.
By adjusting the port_map, the count is limited to six ports.
New output: ahci 0000:09:00.0: AHCI 0001.0301
32 slots 32 ports 6 Gbps 0x3f impl SATA mode.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/ahci.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 4297a8d69dbf7..8bfada4843d83 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -654,6 +654,11 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets");
static void ahci_pci_save_initial_config(struct pci_dev *pdev,
struct ahci_host_priv *hpriv)
{
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) {
+ dev_info(&pdev->dev, "ASM1166 has only six ports\n");
+ hpriv->saved_port_map = 0x3f;
+ }
+
if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
dev_info(&pdev->dev, "JMB361 has only one port\n");
hpriv->force_port_map = 1;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 021/122] ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 020/122] ahci: asm1166: correct count of reported ports Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 022/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Greg Kroah-Hartman
` (106 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lennert Buytenhek, Niklas Cassel,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lennert Buytenhek <kernel@wantstofly.org>
[ Upstream commit 20730e9b277873deeb6637339edcba64468f3da3 ]
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an
ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was
observed that was immediately preceded by the following kernel
messages:
ahci 0000:28:00.0: Using 64-bit DMA addresses
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000]
The first message is produced by code in drivers/iommu/dma-iommu.c
which is accompanied by the following comment that seems to apply:
/*
* Try to use all the 32-bit PCI addresses first. The original SAC vs.
* DAC reasoning loses relevance with PCIe, but enough hardware and
* firmware bugs are still lurking out there that it's safest not to
* venture into the 64-bit space until necessary.
*
* If your device goes wrong after seeing the notice then likely either
* its driver is not setting DMA masks accurately, the hardware has
* some inherent bug in handling >32-bit addresses, or not all the
* expected address bits are wired up between the device and the IOMMU.
*/
Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual
address 0xffffffff00000000 produces the following I/O page faults:
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010]
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010]
Note that the upper 21 bits of the logged DMA address are zero. (When
asking a different PCIe device in the same PCIe slot to DMA to the
same I/O virtual address, we do see all the upper 32 bits of the DMA
address as 1, so this is not an issue with the chipset or IOMMU
configuration on the test system.)
Also, hacking libahci to always set the upper 21 bits of all DMA
addresses to 1 produces no discernible effect on the behavior of the
ASM1061, and mkfs/mount/scrub/etc work as without this hack.
This all strongly suggests that the ASM1061 has a 43 bit DMA address
limit, and this commit therefore adds a quirk to deal with this limit.
This issue probably applies to (some of) the other supported ASMedia
parts as well, but we limit it to the PCI IDs known to refer to
ASM1061 parts, as that's the only part we know for sure to be affected
by this issue at this point.
Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/
Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org>
[cassel: drop date from error messages in commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/ahci.c | 29 +++++++++++++++++++++++------
drivers/ata/ahci.h | 1 +
2 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8bfada4843d83..6f7f8e41404dc 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -49,6 +49,7 @@ enum {
enum board_ids {
/* board IDs by feature in alphabetical order */
board_ahci,
+ board_ahci_43bit_dma,
board_ahci_ign_iferr,
board_ahci_low_power,
board_ahci_no_debounce_delay,
@@ -129,6 +130,13 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_43bit_dma] = {
+ AHCI_HFLAGS (AHCI_HFLAG_43BIT_ONLY),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
[board_ahci_ign_iferr] = {
AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
.flags = AHCI_FLAG_COMMON,
@@ -594,11 +602,11 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
{ PCI_VDEVICE(PROMISE, 0x3781), board_ahci }, /* FastTrak TX8660 ahci-mode */
- /* Asmedia */
+ /* ASMedia */
{ PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */
{ PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */
- { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
- { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
+ { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci_43bit_dma }, /* ASM1061 */
+ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci_43bit_dma }, /* ASM1061/1062 */
{ PCI_VDEVICE(ASMEDIA, 0x0621), board_ahci }, /* ASM1061R */
{ PCI_VDEVICE(ASMEDIA, 0x0622), board_ahci }, /* ASM1062R */
@@ -951,11 +959,20 @@ static int ahci_pci_device_resume(struct device *dev)
#endif /* CONFIG_PM */
-static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
+static int ahci_configure_dma_masks(struct pci_dev *pdev,
+ struct ahci_host_priv *hpriv)
{
- const int dma_bits = using_dac ? 64 : 32;
+ int dma_bits;
int rc;
+ if (hpriv->cap & HOST_CAP_64) {
+ dma_bits = 64;
+ if (hpriv->flags & AHCI_HFLAG_43BIT_ONLY)
+ dma_bits = 43;
+ } else {
+ dma_bits = 32;
+ }
+
/*
* If the device fixup already set the dma_mask to some non-standard
* value, don't extend it here. This happens on STA2X11, for example.
@@ -1933,7 +1950,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ahci_gtf_filter_workaround(host);
/* initialize adapter */
- rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
+ rc = ahci_configure_dma_masks(pdev, hpriv);
if (rc)
return rc;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 7cc6feb17e972..b8db2b0d74146 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -244,6 +244,7 @@ enum {
AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = BIT(27), /* ignore -EOPNOTSUPP
from phy_power_on() */
AHCI_HFLAG_NO_SXS = BIT(28), /* SXS not supported */
+ AHCI_HFLAG_43BIT_ONLY = BIT(29), /* 43bit DMA addr limit */
/* ap->flags bits */
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 022/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 021/122] ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 023/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Greg Kroah-Hartman
` (105 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Baokun Li, Jan Kara, Theodore Tso,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <libaokun1@huawei.com>
[ Upstream commit 4530b3660d396a646aad91a787b6ab37cf604b53 ]
Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.
ext4_mb_regular_allocator
ext4_lock_group(sb, group)
ext4_mb_good_group
// check if the group bbitmap is corrupted
ext4_mb_complex_scan_group
// Scan group gets ac_b_ex but doesn't use it
ext4_unlock_group(sb, group)
ext4_mark_group_bitmap_corrupted(group)
// The block bitmap was corrupted during
// the group unlock gap.
ext4_mb_try_best_found
ext4_lock_group(ac->ac_sb, group)
ext4_mb_use_best_found
mb_mark_used
// Allocating blocks in block bitmap corrupted group
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ext4/mballoc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9bec75847b856..ebb79f10330a8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1854,6 +1854,9 @@ int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
return err;
ext4_lock_group(ac->ac_sb, group);
+ if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+ goto out;
+
max = mb_find_extent(e4b, ex.fe_start, ex.fe_len, &ex);
if (max > 0) {
@@ -1861,6 +1864,7 @@ int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
ext4_mb_use_best_found(ac, e4b);
}
+out:
ext4_unlock_group(ac->ac_sb, group);
ext4_mb_unload_buddy(e4b);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 023/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 022/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 024/122] dmaengine: ti: edma: Add some null pointer checks to the edma_probe Greg Kroah-Hartman
` (104 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Baokun Li, Jan Kara, Theodore Tso,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <libaokun1@huawei.com>
[ Upstream commit 832698373a25950942c04a512daa652c18a9b513 ]
Places the logic for checking if the group's block bitmap is corrupt under
the protection of the group lock to avoid allocating blocks from the group
with a corrupted block bitmap.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ext4/mballoc.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index ebb79f10330a8..46da6845c3072 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1893,12 +1893,10 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
if (err)
return err;
- if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) {
- ext4_mb_unload_buddy(e4b);
- return 0;
- }
-
ext4_lock_group(ac->ac_sb, group);
+ if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+ goto out;
+
max = mb_find_extent(e4b, ac->ac_g_ex.fe_start,
ac->ac_g_ex.fe_len, &ex);
ex.fe_logical = 0xDEADFA11; /* debug value */
@@ -1931,6 +1929,7 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
ac->ac_b_ex = ex;
ext4_mb_use_best_found(ac, e4b);
}
+out:
ext4_unlock_group(ac->ac_sb, group);
ext4_mb_unload_buddy(e4b);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 024/122] dmaengine: ti: edma: Add some null pointer checks to the edma_probe
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 023/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 025/122] regulator: pwm-regulator: Add validity checks in continuous .get_voltage Greg Kroah-Hartman
` (103 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Kunwu Chan, Vinod Koul, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunwu Chan <chentao@kylinos.cn>
[ Upstream commit 6e2276203ac9ff10fc76917ec9813c660f627369 ]
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/ti/edma.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index a1adc8d91fd8d..69292d4a0c441 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2462,6 +2462,11 @@ static int edma_probe(struct platform_device *pdev)
if (irq > 0) {
irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
dev_name(dev));
+ if (!irq_name) {
+ ret = -ENOMEM;
+ goto err_disable_pm;
+ }
+
ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
ecc);
if (ret) {
@@ -2478,6 +2483,11 @@ static int edma_probe(struct platform_device *pdev)
if (irq > 0) {
irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
dev_name(dev));
+ if (!irq_name) {
+ ret = -ENOMEM;
+ goto err_disable_pm;
+ }
+
ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
ecc);
if (ret) {
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 025/122] regulator: pwm-regulator: Add validity checks in continuous .get_voltage
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 024/122] dmaengine: ti: edma: Add some null pointer checks to the edma_probe Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 026/122] nvmet-tcp: fix nvme tcp ida memory leak Greg Kroah-Hartman
` (102 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König,
Martin Blumenstingl, Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit c92688cac239794e4a1d976afa5203a4d3a2ac0e ]
Continuous regulators can be configured to operate only in a certain
duty cycle range (for example from 0..91%). Add a check to error out if
the duty cycle translates to an unsupported (or out of range) voltage.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/pwm-regulator.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 7629476d94aeb..f4d9d9455dea6 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -158,6 +158,9 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
pwm_get_state(drvdata->pwm, &pstate);
voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+ if (voltage < min(max_uV_duty, min_uV_duty) ||
+ voltage > max(max_uV_duty, min_uV_duty))
+ return -ENOTRECOVERABLE;
/*
* The dutycycle for min_uV might be greater than the one for max_uV.
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 026/122] nvmet-tcp: fix nvme tcp ida memory leak
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 025/122] regulator: pwm-regulator: Add validity checks in continuous .get_voltage Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 027/122] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 Greg Kroah-Hartman
` (101 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Guixin Liu, Christoph Hellwig,
Chaitanya Kulkarni, Keith Busch, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guixin Liu <kanie@linux.alibaba.com>
[ Upstream commit 47c5dd66c1840524572dcdd956f4af2bdb6fbdff ]
The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module
exit.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/tcp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 116ae6fd35e2d..d70a2fa4ba45f 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1852,6 +1852,7 @@ static void __exit nvmet_tcp_exit(void)
flush_scheduled_work();
destroy_workqueue(nvmet_tcp_wq);
+ ida_destroy(&nvmet_tcp_queue_ida);
}
module_init(nvmet_tcp_init);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 027/122] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 026/122] nvmet-tcp: fix nvme tcp ida memory leak Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 028/122] spi: sh-msiof: avoid integer overflow in constants Greg Kroah-Hartman
` (100 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chen-Yu Tsai, Andre Przywara,
Jernej Skrabec, Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen-Yu Tsai <wens@csie.org>
[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ]
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/sunxi/sun4i-spdif.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 228485fe07342..6dcad1aa25037 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -464,6 +464,11 @@ static const struct of_device_id sun4i_spdif_of_match[] = {
.compatible = "allwinner,sun50i-h6-spdif",
.data = &sun50i_h6_spdif_quirks,
},
+ {
+ .compatible = "allwinner,sun50i-h616-spdif",
+ /* Essentially the same as the H6, but without RX */
+ .data = &sun50i_h6_spdif_quirks,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 028/122] spi: sh-msiof: avoid integer overflow in constants
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 027/122] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 029/122] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new Greg Kroah-Hartman
` (99 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wolfram Sang, Geert Uytterhoeven,
Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
[ Upstream commit 6500ad28fd5d67d5ca0fee9da73c463090842440 ]
cppcheck rightfully warned:
drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow]
sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1);
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-sh-msiof.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 35d30378256f6..12fd02f92e37b 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -137,14 +137,14 @@ struct sh_msiof_spi_priv {
/* SIFCTR */
#define SIFCTR_TFWM_MASK GENMASK(31, 29) /* Transmit FIFO Watermark */
-#define SIFCTR_TFWM_64 (0 << 29) /* Transfer Request when 64 empty stages */
-#define SIFCTR_TFWM_32 (1 << 29) /* Transfer Request when 32 empty stages */
-#define SIFCTR_TFWM_24 (2 << 29) /* Transfer Request when 24 empty stages */
-#define SIFCTR_TFWM_16 (3 << 29) /* Transfer Request when 16 empty stages */
-#define SIFCTR_TFWM_12 (4 << 29) /* Transfer Request when 12 empty stages */
-#define SIFCTR_TFWM_8 (5 << 29) /* Transfer Request when 8 empty stages */
-#define SIFCTR_TFWM_4 (6 << 29) /* Transfer Request when 4 empty stages */
-#define SIFCTR_TFWM_1 (7 << 29) /* Transfer Request when 1 empty stage */
+#define SIFCTR_TFWM_64 (0UL << 29) /* Transfer Request when 64 empty stages */
+#define SIFCTR_TFWM_32 (1UL << 29) /* Transfer Request when 32 empty stages */
+#define SIFCTR_TFWM_24 (2UL << 29) /* Transfer Request when 24 empty stages */
+#define SIFCTR_TFWM_16 (3UL << 29) /* Transfer Request when 16 empty stages */
+#define SIFCTR_TFWM_12 (4UL << 29) /* Transfer Request when 12 empty stages */
+#define SIFCTR_TFWM_8 (5UL << 29) /* Transfer Request when 8 empty stages */
+#define SIFCTR_TFWM_4 (6UL << 29) /* Transfer Request when 4 empty stages */
+#define SIFCTR_TFWM_1 (7UL << 29) /* Transfer Request when 1 empty stage */
#define SIFCTR_TFUA_MASK GENMASK(26, 20) /* Transmit FIFO Usable Area */
#define SIFCTR_TFUA_SHIFT 20
#define SIFCTR_TFUA(i) ((i) << SIFCTR_TFUA_SHIFT)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 029/122] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 028/122] spi: sh-msiof: avoid integer overflow in constants Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 030/122] nvme-fc: do not wait in vain when unloading module Greg Kroah-Hartman
` (98 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xin Long, Pablo Neira Ayuso,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <lucien.xin@gmail.com>
[ Upstream commit 6e348067ee4bc5905e35faa3a8fafa91c9124bc7 ]
The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we
expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)".
However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY]
in the conntrack entry(ct).
Because of that, if the ct in Router disappears for some reason in [1]
with the packet sequence like below:
Client > Server: sctp (1) [INIT] [init tag: 3201533963]
Server > Client: sctp (1) [INIT ACK] [init tag: 972498433]
Client > Server: sctp (1) [COOKIE ECHO]
Server > Client: sctp (1) [COOKIE ACK]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809]
Server > Client: sctp (1) [SACK] [cum ack 3075057809]
Server > Client: sctp (1) [HB REQ]
(the ct in Router disappears somehow) <-------- [1]
Client > Server: sctp (1) [HB ACK]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [HB REQ]
Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
Client > Server: sctp (1) [HB REQ]
Client > Server: sctp (1) [ABORT]
when processing HB ACK packet in Router it calls sctp_new() to initialize
the new ct with vtag[REPLY] set to HB_ACK packet's vtag.
Later when sending DATA from Client, all the SACKs from Server will get
dropped in Router, as the SACK packet's vtag does not match vtag[REPLY]
in the ct. The worst thing is the vtag in this ct will never get fixed
by the upcoming packets from Server.
This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting
vtag[REPLY] in the ct in sctp_new() as the annotation says. With this
fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the
next HB REQ/ACK from Server is able to fix the vtag as its value is 0
in nf_conntrack_sctp_packet().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_proto_sctp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index e7545bcca805e..6b2a215b27862 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -299,7 +299,7 @@ sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
pr_debug("Setting vtag %x for secondary conntrack\n",
sh->vtag);
ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] = sh->vtag;
- } else {
+ } else if (sch->type == SCTP_CID_SHUTDOWN_ACK) {
/* If it is a shutdown ack OOTB packet, we expect a return
shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
pr_debug("Setting vtag %x for new conn OOTB\n",
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 030/122] nvme-fc: do not wait in vain when unloading module
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 029/122] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 031/122] nvmet-fcloop: swap the list_add_tail arguments Greg Kroah-Hartman
` (97 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Hannes Reinecke,
Daniel Wagner, Keith Busch, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner <dwagner@suse.de>
[ Upstream commit 70fbfc47a392b98e5f8dba70c6efc6839205c982 ]
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/host/fc.c | 47 ++++++------------------------------------
1 file changed, 6 insertions(+), 41 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 906cab35afe7a..8e05239073ef2 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -220,11 +220,6 @@ static LIST_HEAD(nvme_fc_lport_list);
static DEFINE_IDA(nvme_fc_local_port_cnt);
static DEFINE_IDA(nvme_fc_ctrl_cnt);
-static struct workqueue_struct *nvme_fc_wq;
-
-static bool nvme_fc_waiting_to_unload;
-static DECLARE_COMPLETION(nvme_fc_unload_proceed);
-
/*
* These items are short-term. They will eventually be moved into
* a generic FC class. See comments in module init.
@@ -254,8 +249,6 @@ nvme_fc_free_lport(struct kref *ref)
/* remove from transport list */
spin_lock_irqsave(&nvme_fc_lock, flags);
list_del(&lport->port_list);
- if (nvme_fc_waiting_to_unload && list_empty(&nvme_fc_lport_list))
- complete(&nvme_fc_unload_proceed);
spin_unlock_irqrestore(&nvme_fc_lock, flags);
ida_simple_remove(&nvme_fc_local_port_cnt, lport->localport.port_num);
@@ -3823,10 +3816,6 @@ static int __init nvme_fc_init_module(void)
{
int ret;
- nvme_fc_wq = alloc_workqueue("nvme_fc_wq", WQ_MEM_RECLAIM, 0);
- if (!nvme_fc_wq)
- return -ENOMEM;
-
/*
* NOTE:
* It is expected that in the future the kernel will combine
@@ -3844,7 +3833,7 @@ static int __init nvme_fc_init_module(void)
ret = class_register(&fc_class);
if (ret) {
pr_err("couldn't register class fc\n");
- goto out_destroy_wq;
+ return ret;
}
/*
@@ -3868,8 +3857,6 @@ static int __init nvme_fc_init_module(void)
device_destroy(&fc_class, MKDEV(0, 0));
out_destroy_class:
class_unregister(&fc_class);
-out_destroy_wq:
- destroy_workqueue(nvme_fc_wq);
return ret;
}
@@ -3889,45 +3876,23 @@ nvme_fc_delete_controllers(struct nvme_fc_rport *rport)
spin_unlock(&rport->lock);
}
-static void
-nvme_fc_cleanup_for_unload(void)
+static void __exit nvme_fc_exit_module(void)
{
struct nvme_fc_lport *lport;
struct nvme_fc_rport *rport;
-
- list_for_each_entry(lport, &nvme_fc_lport_list, port_list) {
- list_for_each_entry(rport, &lport->endp_list, endp_list) {
- nvme_fc_delete_controllers(rport);
- }
- }
-}
-
-static void __exit nvme_fc_exit_module(void)
-{
unsigned long flags;
- bool need_cleanup = false;
spin_lock_irqsave(&nvme_fc_lock, flags);
- nvme_fc_waiting_to_unload = true;
- if (!list_empty(&nvme_fc_lport_list)) {
- need_cleanup = true;
- nvme_fc_cleanup_for_unload();
- }
+ list_for_each_entry(lport, &nvme_fc_lport_list, port_list)
+ list_for_each_entry(rport, &lport->endp_list, endp_list)
+ nvme_fc_delete_controllers(rport);
spin_unlock_irqrestore(&nvme_fc_lock, flags);
- if (need_cleanup) {
- pr_info("%s: waiting for ctlr deletes\n", __func__);
- wait_for_completion(&nvme_fc_unload_proceed);
- pr_info("%s: ctrl deletes complete\n", __func__);
- }
+ flush_workqueue(nvme_delete_wq);
nvmf_unregister_transport(&nvme_fc_transport);
- ida_destroy(&nvme_fc_local_port_cnt);
- ida_destroy(&nvme_fc_ctrl_cnt);
-
device_destroy(&fc_class, MKDEV(0, 0));
class_unregister(&fc_class);
- destroy_workqueue(nvme_fc_wq);
}
module_init(nvme_fc_init_module);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 031/122] nvmet-fcloop: swap the list_add_tail arguments
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 030/122] nvme-fc: do not wait in vain when unloading module Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 032/122] nvmet-fc: release reference on target port Greg Kroah-Hartman
` (96 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christoph Hellwig, Hannes Reinecke,
Daniel Wagner, Keith Busch, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner <dwagner@suse.de>
[ Upstream commit dcfad4ab4d6733f2861cd241d8532a0004fc835a ]
The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/fcloop.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index 80a208fb34f52..f2c5136bf2b82 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -358,7 +358,7 @@ fcloop_h2t_ls_req(struct nvme_fc_local_port *localport,
if (!rport->targetport) {
tls_req->status = -ECONNREFUSED;
spin_lock(&rport->lock);
- list_add_tail(&rport->ls_list, &tls_req->ls_list);
+ list_add_tail(&tls_req->ls_list, &rport->ls_list);
spin_unlock(&rport->lock);
schedule_work(&rport->ls_work);
return ret;
@@ -391,7 +391,7 @@ fcloop_h2t_xmt_ls_rsp(struct nvmet_fc_target_port *targetport,
if (remoteport) {
rport = remoteport->private;
spin_lock(&rport->lock);
- list_add_tail(&rport->ls_list, &tls_req->ls_list);
+ list_add_tail(&tls_req->ls_list, &rport->ls_list);
spin_unlock(&rport->lock);
schedule_work(&rport->ls_work);
}
@@ -446,7 +446,7 @@ fcloop_t2h_ls_req(struct nvmet_fc_target_port *targetport, void *hosthandle,
if (!tport->remoteport) {
tls_req->status = -ECONNREFUSED;
spin_lock(&tport->lock);
- list_add_tail(&tport->ls_list, &tls_req->ls_list);
+ list_add_tail(&tls_req->ls_list, &tport->ls_list);
spin_unlock(&tport->lock);
schedule_work(&tport->ls_work);
return ret;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 032/122] nvmet-fc: release reference on target port
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 031/122] nvmet-fcloop: swap the list_add_tail arguments Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 033/122] nvmet-fc: abort command when there is no binding Greg Kroah-Hartman
` (95 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hannes Reinecke, Christoph Hellwig,
Daniel Wagner, Keith Busch, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner <dwagner@suse.de>
[ Upstream commit c691e6d7e13dab81ac8c7489c83b5dea972522a5 ]
In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/fc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 46fc44ce86712..18a64a4fd8da9 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -357,7 +357,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
if (!lsop->req_queued) {
spin_unlock_irqrestore(&tgtport->lock, flags);
- return;
+ goto out_puttgtport;
}
list_del(&lsop->lsreq_list);
@@ -370,6 +370,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
(lsreq->rqstlen + lsreq->rsplen),
DMA_BIDIRECTIONAL);
+out_puttgtport:
nvmet_fc_tgtport_put(tgtport);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 033/122] nvmet-fc: abort command when there is no binding
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 032/122] nvmet-fc: release reference on target port Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 034/122] ext4: correct the hole length returned by ext4_map_blocks() Greg Kroah-Hartman
` (94 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hannes Reinecke, Christoph Hellwig,
Daniel Wagner, Keith Busch, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner <dwagner@suse.de>
[ Upstream commit 3146345c2e9c2f661527054e402b0cfad80105a4 ]
When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/fc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 18a64a4fd8da9..846fb41da6430 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1102,6 +1102,9 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
int idx;
bool needrandom = true;
+ if (!tgtport->pe)
+ return NULL;
+
assoc = kzalloc(sizeof(*assoc), GFP_KERNEL);
if (!assoc)
return NULL;
@@ -2529,8 +2532,9 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
fod->req.cmd = &fod->cmdiubuf.sqe;
fod->req.cqe = &fod->rspiubuf.cqe;
- if (tgtport->pe)
- fod->req.port = tgtport->pe->port;
+ if (!tgtport->pe)
+ goto transport_error;
+ fod->req.port = tgtport->pe->port;
/* clear any response payload */
memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 034/122] ext4: correct the hole length returned by ext4_map_blocks()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 033/122] nvmet-fc: abort command when there is no binding Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 035/122] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table Greg Kroah-Hartman
` (93 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Yi, Jan Kara, Theodore Tso,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Yi <yi.zhang@huawei.com>
[ Upstream commit 6430dea07e85958fa87d0276c0c4388dd51e630b ]
In ext4_map_blocks(), if we can't find a range of mapping in the
extents cache, we are calling ext4_ext_map_blocks() to search the real
path and ext4_ext_determine_hole() to determine the hole range. But if
the querying range was partially or completely overlaped by a delalloc
extent, we can't find it in the real extent path, so the returned hole
length could be incorrect.
Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc
extent, but it searches start from the expanded hole_start, doesn't
start from the querying range, so the delalloc extent found could not be
the one that overlaped the querying range, plus, it also didn't adjust
the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle
delalloc and insert adjusted hole extent in ext4_ext_determine_hole().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ext4/extents.c | 111 +++++++++++++++++++++++++++++-----------------
1 file changed, 70 insertions(+), 41 deletions(-)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 193b13630ac1e..68aa8760cb465 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2222,7 +2222,7 @@ static int ext4_fill_es_cache_info(struct inode *inode,
/*
- * ext4_ext_determine_hole - determine hole around given block
+ * ext4_ext_find_hole - find hole around given block according to the given path
* @inode: inode we lookup in
* @path: path in extent tree to @lblk
* @lblk: pointer to logical block around which we want to determine hole
@@ -2234,9 +2234,9 @@ static int ext4_fill_es_cache_info(struct inode *inode,
* The function returns the length of a hole starting at @lblk. We update @lblk
* to the beginning of the hole if we managed to find it.
*/
-static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
- struct ext4_ext_path *path,
- ext4_lblk_t *lblk)
+static ext4_lblk_t ext4_ext_find_hole(struct inode *inode,
+ struct ext4_ext_path *path,
+ ext4_lblk_t *lblk)
{
int depth = ext_depth(inode);
struct ext4_extent *ex;
@@ -2263,30 +2263,6 @@ static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
return len;
}
-/*
- * ext4_ext_put_gap_in_cache:
- * calculate boundaries of the gap that the requested block fits into
- * and cache this gap
- */
-static void
-ext4_ext_put_gap_in_cache(struct inode *inode, ext4_lblk_t hole_start,
- ext4_lblk_t hole_len)
-{
- struct extent_status es;
-
- ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
- hole_start + hole_len - 1, &es);
- if (es.es_len) {
- /* There's delayed extent containing lblock? */
- if (es.es_lblk <= hole_start)
- return;
- hole_len = min(es.es_lblk - hole_start, hole_len);
- }
- ext_debug(inode, " -> %u:%u\n", hole_start, hole_len);
- ext4_es_insert_extent(inode, hole_start, hole_len, ~0,
- EXTENT_STATUS_HOLE);
-}
-
/*
* ext4_ext_rm_idx:
* removes index from the index block.
@@ -4058,6 +4034,69 @@ static int get_implied_cluster_alloc(struct super_block *sb,
return 0;
}
+/*
+ * Determine hole length around the given logical block, first try to
+ * locate and expand the hole from the given @path, and then adjust it
+ * if it's partially or completely converted to delayed extents, insert
+ * it into the extent cache tree if it's indeed a hole, finally return
+ * the length of the determined extent.
+ */
+static ext4_lblk_t ext4_ext_determine_insert_hole(struct inode *inode,
+ struct ext4_ext_path *path,
+ ext4_lblk_t lblk)
+{
+ ext4_lblk_t hole_start, len;
+ struct extent_status es;
+
+ hole_start = lblk;
+ len = ext4_ext_find_hole(inode, path, &hole_start);
+again:
+ ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
+ hole_start + len - 1, &es);
+ if (!es.es_len)
+ goto insert_hole;
+
+ /*
+ * There's a delalloc extent in the hole, handle it if the delalloc
+ * extent is in front of, behind and straddle the queried range.
+ */
+ if (lblk >= es.es_lblk + es.es_len) {
+ /*
+ * The delalloc extent is in front of the queried range,
+ * find again from the queried start block.
+ */
+ len -= lblk - hole_start;
+ hole_start = lblk;
+ goto again;
+ } else if (in_range(lblk, es.es_lblk, es.es_len)) {
+ /*
+ * The delalloc extent containing lblk, it must have been
+ * added after ext4_map_blocks() checked the extent status
+ * tree, adjust the length to the delalloc extent's after
+ * lblk.
+ */
+ len = es.es_lblk + es.es_len - lblk;
+ return len;
+ } else {
+ /*
+ * The delalloc extent is partially or completely behind
+ * the queried range, update hole length until the
+ * beginning of the delalloc extent.
+ */
+ len = min(es.es_lblk - hole_start, len);
+ }
+
+insert_hole:
+ /* Put just found gap into cache to speed up subsequent requests */
+ ext_debug(inode, " -> %u:%u\n", hole_start, len);
+ ext4_es_insert_extent(inode, hole_start, len, ~0, EXTENT_STATUS_HOLE);
+
+ /* Update hole_len to reflect hole size after lblk */
+ if (hole_start != lblk)
+ len -= lblk - hole_start;
+
+ return len;
+}
/*
* Block allocation/map/preallocation routine for extents based files
@@ -4175,22 +4214,12 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
* we couldn't try to create block if create flag is zero
*/
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
- ext4_lblk_t hole_start, hole_len;
+ ext4_lblk_t len;
- hole_start = map->m_lblk;
- hole_len = ext4_ext_determine_hole(inode, path, &hole_start);
- /*
- * put just found gap into cache to speed up
- * subsequent requests
- */
- ext4_ext_put_gap_in_cache(inode, hole_start, hole_len);
+ len = ext4_ext_determine_insert_hole(inode, path, map->m_lblk);
- /* Update hole_len to reflect hole size after map->m_lblk */
- if (hole_start != map->m_lblk)
- hole_len -= map->m_lblk - hole_start;
map->m_pblk = 0;
- map->m_len = min_t(unsigned int, map->m_len, hole_len);
-
+ map->m_len = min_t(unsigned int, map->m_len, len);
goto out;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 035/122] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 034/122] ext4: correct the hole length returned by ext4_map_blocks() Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 036/122] efi: runtime: Fix potential overflow of soft-reserved region size Greg Kroah-Hartman
` (92 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Szilard Fabian, Dmitry Torokhov,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Szilard Fabian <szfabian@bluemarch.art>
[ Upstream commit 4255447ad34c5c3785fcdcf76cfa0271d6e5ed39 ]
Another Fujitsu-related patch.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.
So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index cd21c92a6b2cd..6804970d8f51a 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -625,6 +625,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOAUX)
},
+ {
+ /* Fujitsu Lifebook U728 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX)
+ },
{
/* Gigabyte M912 */
.matches = {
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 036/122] efi: runtime: Fix potential overflow of soft-reserved region size
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 035/122] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 037/122] efi: Dont add memblocks for soft-reserved memory Greg Kroah-Hartman
` (91 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrew Bresticker, Ard Biesheuvel,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Bresticker <abrestic@rivosinc.com>
[ Upstream commit de1034b38a346ef6be25fe8792f5d1e0684d5ff4 ]
md_size will have been narrowed if we have >= 4GB worth of pages in a
soft-reserved region.
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/efi/arm-runtime.c | 2 +-
drivers/firmware/efi/riscv-runtime.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c
index 3359ae2adf24b..9054c2852580d 100644
--- a/drivers/firmware/efi/arm-runtime.c
+++ b/drivers/firmware/efi/arm-runtime.c
@@ -107,7 +107,7 @@ static int __init arm_enable_runtime_services(void)
efi_memory_desc_t *md;
for_each_efi_memory_desc(md) {
- int md_size = md->num_pages << EFI_PAGE_SHIFT;
+ u64 md_size = md->num_pages << EFI_PAGE_SHIFT;
struct resource *res;
if (!(md->attribute & EFI_MEMORY_SP))
diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c
index d28e715d2bcc8..6711e64eb0b16 100644
--- a/drivers/firmware/efi/riscv-runtime.c
+++ b/drivers/firmware/efi/riscv-runtime.c
@@ -85,7 +85,7 @@ static int __init riscv_enable_runtime_services(void)
efi_memory_desc_t *md;
for_each_efi_memory_desc(md) {
- int md_size = md->num_pages << EFI_PAGE_SHIFT;
+ u64 md_size = md->num_pages << EFI_PAGE_SHIFT;
struct resource *res;
if (!(md->attribute & EFI_MEMORY_SP))
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 037/122] efi: Dont add memblocks for soft-reserved memory
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 036/122] efi: runtime: Fix potential overflow of soft-reserved region size Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 038/122] hwmon: (coretemp) Enlarge per package core count limit Greg Kroah-Hartman
` (90 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andrew Bresticker, Ard Biesheuvel,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Bresticker <abrestic@rivosinc.com>
[ Upstream commit 0bcff59ef7a652fcdc6d535554b63278c2406c8f ]
Adding memblocks for soft-reserved regions prevents them from later being
hotplugged in by dax_kmem.
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firmware/efi/efi-init.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
index f55a92ff12c0f..86da3c7a5036a 100644
--- a/drivers/firmware/efi/efi-init.c
+++ b/drivers/firmware/efi/efi-init.c
@@ -141,15 +141,6 @@ static __init int is_usable_memory(efi_memory_desc_t *md)
case EFI_BOOT_SERVICES_DATA:
case EFI_CONVENTIONAL_MEMORY:
case EFI_PERSISTENT_MEMORY:
- /*
- * Special purpose memory is 'soft reserved', which means it
- * is set aside initially, but can be hotplugged back in or
- * be assigned to the dax driver after boot.
- */
- if (efi_soft_reserve_enabled() &&
- (md->attribute & EFI_MEMORY_SP))
- return false;
-
/*
* According to the spec, these regions are no longer reserved
* after calling ExitBootServices(). However, we can only use
@@ -194,6 +185,16 @@ static __init void reserve_regions(void)
size = npages << PAGE_SHIFT;
if (is_memory(md)) {
+ /*
+ * Special purpose memory is 'soft reserved', which
+ * means it is set aside initially. Don't add a memblock
+ * for it now so that it can be hotplugged back in or
+ * be assigned to the dax driver after boot.
+ */
+ if (efi_soft_reserve_enabled() &&
+ (md->attribute & EFI_MEMORY_SP))
+ continue;
+
early_init_dt_add_memory_arch(paddr, size);
if (!is_usable_memory(md))
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 038/122] hwmon: (coretemp) Enlarge per package core count limit
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 037/122] efi: Dont add memblocks for soft-reserved memory Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 039/122] scsi: lpfc: Use unsigned type for num_sge Greg Kroah-Hartman
` (89 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zhang Rui, Guenter Roeck,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Rui <rui.zhang@intel.com>
[ Upstream commit 34cf8c657cf0365791cdc658ddbca9cc907726ce ]
Currently, coretemp driver supports only 128 cores per package.
This loses some core temperature information on systems that have more
than 128 cores per package.
[ 58.685033] coretemp coretemp.0: Adding Core 128 failed
[ 58.692009] coretemp coretemp.0: Adding Core 129 failed
...
Enlarge the limitation to 512 because there are platforms with more than
256 cores per package.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-4-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/coretemp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index d67d972d18aa2..cbe2f874b5e2f 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
#define PKG_SYSFS_ATTR_NO 1 /* Sysfs attribute for package temp */
#define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */
-#define NUM_REAL_CORES 128 /* Number of Real cores per cpu */
+#define NUM_REAL_CORES 512 /* Number of Real cores per cpu */
#define CORETEMP_NAME_LENGTH 28 /* String Length of attrs */
#define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */
#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 039/122] scsi: lpfc: Use unsigned type for num_sge
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 038/122] hwmon: (coretemp) Enlarge per package core count limit Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 040/122] firewire: core: send bus reset promptly on gap count error Greg Kroah-Hartman
` (88 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hannes Reinecke, Daniel Wagner,
Martin K. Petersen, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <hare@suse.de>
[ Upstream commit d6c1b19153f92e95e5e1801d540e98771053afae ]
LUNs going into "failed ready running" state observed on >1T and on even
numbers of size (2T, 4T, 6T, 8T and 10T). The issue occurs when DIF is
enabled at the host.
The kernel logs:
Cannot setup S/G List for HBAIO segs 1/1 SGL 512 SCSI 256: 3 0
The host lpfc driver is failing to setup scatter/gather list (protection
data) for the I/Os.
The return type lpfc_bg_setup_sgl()/lpfc_bg_setup_sgl_prot() causes the
compiler to remove the most significant bit. Use an unsigned type instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: added commit message]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20231220162658.12392-1-dwagner@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/lpfc/lpfc_scsi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 983eeb0e3d07e..b4b87e5d8b291 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1944,7 +1944,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
*
* Returns the number of SGEs added to the SGL.
**/
-static int
+static uint32_t
lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
struct sli4_sge *sgl, int datasegcnt,
struct lpfc_io_buf *lpfc_cmd)
@@ -1952,8 +1952,8 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
struct scatterlist *sgde = NULL; /* s/g data entry */
struct sli4_sge_diseed *diseed = NULL;
dma_addr_t physaddr;
- int i = 0, num_sge = 0, status;
- uint32_t reftag;
+ int i = 0, status;
+ uint32_t reftag, num_sge = 0;
uint8_t txop, rxop;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
uint32_t rc;
@@ -2124,7 +2124,7 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
*
* Returns the number of SGEs added to the SGL.
**/
-static int
+static uint32_t
lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
struct sli4_sge *sgl, int datacnt, int protcnt,
struct lpfc_io_buf *lpfc_cmd)
@@ -2148,8 +2148,8 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
uint32_t rc;
#endif
uint32_t checking = 1;
- uint32_t dma_offset = 0;
- int num_sge = 0, j = 2;
+ uint32_t dma_offset = 0, num_sge = 0;
+ int j = 2;
struct sli4_hybrid_sgl *sgl_xtra = NULL;
sgpe = scsi_prot_sglist(sc);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 040/122] firewire: core: send bus reset promptly on gap count error
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 039/122] scsi: lpfc: Use unsigned type for num_sge Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 041/122] virtio-blk: Ensure no requests in virtqueues before deleting vqs Greg Kroah-Hartman
` (87 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Adam Goldman, Takashi Sakamoto,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
[ Upstream commit 7ed4380009e96d9e9c605e12822e987b35b05648 ]
If we are bus manager and the bus has inconsistent gap counts, send a
bus reset immediately instead of trying to read the root node's config
ROM first. Otherwise, we could spend a lot of time trying to read the
config ROM but never succeeding.
This eliminates a 50+ second delay before the FireWire bus is usable after
a newly connected device is powered on in certain circumstances.
The delay occurs if a gap count inconsistency occurs, we are not the root
node, and we become bus manager. One scenario that causes this is with a TI
XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being
connected to the FireWire cable. In this configuration, the Linux box will
not receive the initial PHY configuration packet sent by the DSR-25 as IRM,
resulting in the DSR-25 having a gap count of 44 while the Linux box has a
gap count of 63.
FireWire devices have a gap count parameter, which is set to 63 on power-up
and can be changed with a PHY configuration packet. This determines the
duration of the subaction and arbitration gaps. For reliable communication,
all nodes on a FireWire bus must have the same gap count.
A node may have zero or more of the following roles: root node, bus manager
(BM), isochronous resource manager (IRM), and cycle master. Unless a root
node was forced with a PHY configuration packet, any node might become root
node after a bus reset. Only the root node can become cycle master. If the
root node is not cycle master capable, the BM or IRM should force a change
of root node.
After a bus reset, each node sends a self-ID packet, which contains its
current gap count. A single bus reset does not change the gap count, but
two bus resets in a row will set the gap count to 63. Because a consistent
gap count is required for reliable communication, IEEE 1394a-2000 requires
that the bus manager generate a bus reset if it detects that the gap count
is inconsistent.
When the gap count is inconsistent, build_tree() will notice this after the
self identification process. It will set card->gap_count to the invalid
value 0. If we become bus master, this will force bm_work() to send a bus
reset when it performs gap count optimization.
After a bus reset, there is no bus manager. We will almost always try to
become bus manager. Once we become bus manager, we will first determine
whether the root node is cycle master capable. Then, we will determine if
the gap count should be changed. If either the root node or the gap count
should be changed, we will generate a bus reset.
To determine if the root node is cycle master capable, we read its
configuration ROM. bm_work() will wait until we have finished trying to
read the configuration ROM.
However, an inconsistent gap count can make this take a long time.
read_config_rom() will read the first few quadlets from the config ROM. Due
to the gap count inconsistency, eventually one of the reads will time out.
When read_config_rom() fails, fw_device_init() calls it again until
MAX_RETRIES is reached. This takes 50+ seconds.
Once we give up trying to read the configuration ROM, bm_work() will wake
up, assume that the root node is not cycle master capable, and do a bus
reset. Hopefully, this will resolve the gap count inconsistency.
This change makes bm_work() check for an inconsistent gap count before
waiting for the root node's configuration ROM. If the gap count is
inconsistent, bm_work() will immediately do a bus reset. This eliminates
the 50+ second delay and rapidly brings the bus to a working state.
I considered that if the gap count is inconsistent, a PHY configuration
packet might not be successful, so it could be desirable to skip the PHY
configuration packet before the bus reset in this case. However, IEEE
1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY
configuration packet before a bus reset when correcting a gap count error.
Since the standard endorses this, I decided it's safe to retain the PHY
configuration packet transmission.
Normally, after a topology change, we will reset the bus a maximum of 5
times to change the root node and perform gap count optimization. However,
if there is a gap count inconsistency, we must always generate a bus reset.
Otherwise the gap count inconsistency will persist and communication will
be unreliable. For that reason, if there is a gap count inconstency, we
generate a bus reset even if we already reached the 5 reset limit.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/firewire/core-card.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index f3b3953cac834..be195ba834632 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -429,7 +429,23 @@ static void bm_work(struct work_struct *work)
*/
card->bm_generation = generation;
- if (root_device == NULL) {
+ if (card->gap_count == 0) {
+ /*
+ * If self IDs have inconsistent gap counts, do a
+ * bus reset ASAP. The config rom read might never
+ * complete, so don't wait for it. However, still
+ * send a PHY configuration packet prior to the
+ * bus reset. The PHY configuration packet might
+ * fail, but 1394-2008 8.4.5.2 explicitly permits
+ * it in this case, so it should be safe to try.
+ */
+ new_root_id = local_id;
+ /*
+ * We must always send a bus reset if the gap count
+ * is inconsistent, so bypass the 5-reset limit.
+ */
+ card->bm_retries = 0;
+ } else if (root_device == NULL) {
/*
* Either link_on is false, or we failed to read the
* config rom. In either case, pick another root.
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 041/122] virtio-blk: Ensure no requests in virtqueues before deleting vqs.
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 040/122] firewire: core: send bus reset promptly on gap count error Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 042/122] pmdomain: renesas: r8a77980-sysc: CR7 must be always on Greg Kroah-Hartman
` (86 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yi Sun, Stefan Hajnoczi, Jens Axboe,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Sun <yi.sun@unisoc.com>
[ Upstream commit 4ce6e2db00de8103a0687fb0f65fd17124a51aaa ]
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/virtio_blk.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 9b54eec9b17eb..7eae3f3732336 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -952,14 +952,15 @@ static int virtblk_freeze(struct virtio_device *vdev)
{
struct virtio_blk *vblk = vdev->priv;
+ /* Ensure no requests in virtqueues before deleting vqs. */
+ blk_mq_freeze_queue(vblk->disk->queue);
+
/* Ensure we don't receive any more interrupts */
vdev->config->reset(vdev);
/* Make sure no work handler is accessing the device. */
flush_work(&vblk->config_work);
- blk_mq_quiesce_queue(vblk->disk->queue);
-
vdev->config->del_vqs(vdev);
kfree(vblk->vqs);
@@ -977,7 +978,7 @@ static int virtblk_restore(struct virtio_device *vdev)
virtio_device_ready(vdev);
- blk_mq_unquiesce_queue(vblk->disk->queue);
+ blk_mq_unfreeze_queue(vblk->disk->queue);
return 0;
}
#endif
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 042/122] pmdomain: renesas: r8a77980-sysc: CR7 must be always on
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 041/122] virtio-blk: Ensure no requests in virtqueues before deleting vqs Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 043/122] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger Greg Kroah-Hartman
` (85 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geert Uytterhoeven, Ulf Hansson,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <geert+renesas@glider.be>
[ Upstream commit f0e4a1356466ec1858ae8e5c70bea2ce5e55008b ]
The power domain containing the Cortex-R7 CPU core on the R-Car V3H SoC
must always be in power-on state, unlike on other SoCs in the R-Car Gen3
family. See Table 9.4 "Power domains" in the R-Car Series, 3rd
Generation Hardware User’s Manual Rev.1.00 and later.
Fix this by marking the domain as a CPU domain without control
registers, so the driver will not touch it.
Fixes: 41d6d8bd8ae9 ("soc: renesas: rcar-sysc: add R8A77980 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/fdad9a86132d53ecddf72b734dac406915c4edc0.1705076735.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/soc/renesas/r8a77980-sysc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c
index 39ca84a67daad..621e411fc9991 100644
--- a/drivers/soc/renesas/r8a77980-sysc.c
+++ b/drivers/soc/renesas/r8a77980-sysc.c
@@ -25,7 +25,8 @@ static const struct rcar_sysc_area r8a77980_areas[] __initconst = {
PD_CPU_NOCR },
{ "ca53-cpu3", 0x200, 3, R8A77980_PD_CA53_CPU3, R8A77980_PD_CA53_SCU,
PD_CPU_NOCR },
- { "cr7", 0x240, 0, R8A77980_PD_CR7, R8A77980_PD_ALWAYS_ON },
+ { "cr7", 0x240, 0, R8A77980_PD_CR7, R8A77980_PD_ALWAYS_ON,
+ PD_CPU_NOCR },
{ "a3ir", 0x180, 0, R8A77980_PD_A3IR, R8A77980_PD_ALWAYS_ON },
{ "a2ir0", 0x400, 0, R8A77980_PD_A2IR0, R8A77980_PD_A3IR },
{ "a2ir1", 0x400, 1, R8A77980_PD_A2IR1, R8A77980_PD_A3IR },
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 043/122] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 042/122] pmdomain: renesas: r8a77980-sysc: CR7 must be always on Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 044/122] irqchip/mips-gic: Dont touch vl_map if a local interrupt is not routable Greg Kroah-Hartman
` (84 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Rafał Miłecki,
Florian Fainelli, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafał Miłecki <rafal@milecki.pl>
[ Upstream commit be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 ]
There is no such trigger documented or implemented in Linux. It was a
copy & paste mistake.
This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'default-off' does not match '^cpu[0-9]*$'
'default-off' does not match '^hci[0-9]+-power$'
'default-off' does not match '^mmc[0-9]+$'
'default-off' does not match '^phy[0-9]+tx$'
From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 1 -
arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 2 --
2 files changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index 00e688b45d981..5901160919dcd 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -26,7 +26,6 @@ leds {
wlan {
label = "bcm53xx:blue:wlan";
gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
system {
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 78c80a5d3f4fa..8e7483272d47d 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -26,7 +26,6 @@ leds {
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
system {
@@ -42,7 +41,6 @@ pcie0_leds {
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 044/122] irqchip/mips-gic: Dont touch vl_map if a local interrupt is not routable
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 043/122] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 045/122] ARM: dts: imx: Set default tuning step for imx6sx usdhc Greg Kroah-Hartman
` (83 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jiaxun Yang, Serge Semin,
Marc Zyngier, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
[ Upstream commit 2c6c9c049510163090b979ea5f92a68ae8d93c45 ]
When a GIC local interrupt is not routable, it's vl_map will be used
to control some internal states for core (providing IPTI, IPPCI, IPFDC
input signal for core). Overriding it will interfere core's intetrupt
controller.
Do not touch vl_map if a local interrupt is not routable, we are not
going to remap it.
Before dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on
irq_cpu_online()"), if a local interrupt is not routable, then it won't
be requested from GIC Local domain, and thus gic_all_vpes_irq_cpu_online
won't be called for that particular interrupt.
Fixes: dd098a0e0319 (" irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230424103156.66753-2-jiaxun.yang@flygoat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/irqchip/irq-mips-gic.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index fc25b900cef71..7888e3c08df40 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -398,6 +398,8 @@ static void gic_all_vpes_irq_cpu_online(void)
unsigned int intr = local_intrs[i];
struct gic_all_vpes_chip_data *cd;
+ if (!gic_local_irq_is_routable(intr))
+ continue;
cd = &gic_all_vpes_chip_data[intr];
write_gic_vl_map(mips_gic_vx_map_reg(intr), cd->map);
if (cd->mask)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 045/122] ARM: dts: imx: Set default tuning step for imx6sx usdhc
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 044/122] irqchip/mips-gic: Dont touch vl_map if a local interrupt is not routable Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 046/122] ASoC: fsl_micfil: register platform component before registering cpu dai Greg Kroah-Hartman
` (82 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiaolei Wang, Fabio Estevam,
Shawn Guo, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaolei Wang <xiaolei.wang@windriver.com>
[ Upstream commit 0a2b96e42a0284c4fc03022236f656a085ca714a ]
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109
Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6sx.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 08332f70a8dc2..51491b7418e40 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -981,6 +981,8 @@ usdhc1: mmc@2190000 {
<&clks IMX6SX_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
status = "disabled";
};
@@ -993,6 +995,8 @@ usdhc2: mmc@2194000 {
<&clks IMX6SX_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
status = "disabled";
};
@@ -1005,6 +1009,8 @@ usdhc3: mmc@2198000 {
<&clks IMX6SX_CLK_USDHC3>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
status = "disabled";
};
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 046/122] ASoC: fsl_micfil: register platform component before registering cpu dai
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 045/122] ARM: dts: imx: Set default tuning step for imx6sx usdhc Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 047/122] media: av7110: prevent underflow in write_ts_to_decoder() Greg Kroah-Hartman
` (81 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Shengjiu Wang, Mark Brown,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shengjiu Wang <shengjiu.wang@nxp.com>
[ Upstream commit 0adf292069dcca8bab76a603251fcaabf77468ca ]
There is no defer probe when adding platform component to
snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime()
snd_soc_register_card()
-> snd_soc_bind_card()
-> snd_soc_add_pcm_runtime()
-> adding cpu dai
-> adding codec dai
-> adding platform component.
So if the platform component is not ready at that time, then the
sound card still registered successfully, but platform component
is empty, the sound card can't be used.
As there is defer probe checking for cpu dai component, then register
platform component before cpu dai to avoid such issue.
Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl_micfil.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 97f83c63e7652..826829e3ff7a2 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -756,18 +756,23 @@ static int fsl_micfil_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
+ /*
+ * Register platform component before registering cpu dai for there
+ * is not defer probe for platform component in snd_soc_add_pcm_runtime().
+ */
+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to pcm register\n");
+ return ret;
+ }
+
ret = devm_snd_soc_register_component(&pdev->dev, &fsl_micfil_component,
&fsl_micfil_dai, 1);
if (ret) {
dev_err(&pdev->dev, "failed to register component %s\n",
fsl_micfil_component.name);
- return ret;
}
- ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
- if (ret)
- dev_err(&pdev->dev, "failed to pcm register\n");
-
return ret;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 047/122] media: av7110: prevent underflow in write_ts_to_decoder()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 046/122] ASoC: fsl_micfil: register platform component before registering cpu dai Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 048/122] hvc/xen: prevent concurrent accesses to the shared ring Greg Kroah-Hartman
` (80 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Hans Verkuil,
Mauro Carvalho Chehab, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <error27@gmail.com>
[ Upstream commit eed9496a0501357aa326ddd6b71408189ed872eb ]
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.
Fixes: fd46d16d602a ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/ttpci/av7110_av.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/ttpci/av7110_av.c b/drivers/media/pci/ttpci/av7110_av.c
index ea9f7d0058a21..e201d5a56bc65 100644
--- a/drivers/media/pci/ttpci/av7110_av.c
+++ b/drivers/media/pci/ttpci/av7110_av.c
@@ -822,10 +822,10 @@ static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, s
av7110_ipack_flush(ipack);
if (buf[3] & ADAPT_FIELD) {
+ if (buf[4] > len - 1 - 4)
+ return 0;
len -= buf[4] + 1;
buf += buf[4] + 1;
- if (!len)
- return 0;
}
av7110_ipack_instant_repack(buf + 4, len - 4, ipack);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 048/122] hvc/xen: prevent concurrent accesses to the shared ring
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 047/122] media: av7110: prevent underflow in write_ts_to_decoder() Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 049/122] hsr: Avoid double remove of a node Greg Kroah-Hartman
` (79 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Roger Pau Monné, Juergen Gross,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roger Pau Monne <roger.pau@citrix.com>
[ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ]
The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation. Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.
Introduce a lock to xencons_info to serialize accesses to the shared
ring. This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.
Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.
Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/hvc/hvc_xen.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index cf0fb650a9247..4886cad0fde61 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -43,6 +43,7 @@ struct xencons_info {
int irq;
int vtermno;
grant_ref_t gntref;
+ spinlock_t ring_lock;
};
static LIST_HEAD(xenconsoles);
@@ -89,12 +90,15 @@ static int __write_console(struct xencons_info *xencons,
XENCONS_RING_IDX cons, prod;
struct xencons_interface *intf = xencons->intf;
int sent = 0;
+ unsigned long flags;
+ spin_lock_irqsave(&xencons->ring_lock, flags);
cons = intf->out_cons;
prod = intf->out_prod;
mb(); /* update queue values before going on */
if ((prod - cons) > sizeof(intf->out)) {
+ spin_unlock_irqrestore(&xencons->ring_lock, flags);
pr_err_once("xencons: Illegal ring page indices");
return -EINVAL;
}
@@ -104,6 +108,7 @@ static int __write_console(struct xencons_info *xencons,
wmb(); /* write ring before updating pointer */
intf->out_prod = prod;
+ spin_unlock_irqrestore(&xencons->ring_lock, flags);
if (sent)
notify_daemon(xencons);
@@ -146,16 +151,19 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
int recv = 0;
struct xencons_info *xencons = vtermno_to_xencons(vtermno);
unsigned int eoiflag = 0;
+ unsigned long flags;
if (xencons == NULL)
return -EINVAL;
intf = xencons->intf;
+ spin_lock_irqsave(&xencons->ring_lock, flags);
cons = intf->in_cons;
prod = intf->in_prod;
mb(); /* get pointers before reading ring */
if ((prod - cons) > sizeof(intf->in)) {
+ spin_unlock_irqrestore(&xencons->ring_lock, flags);
pr_err_once("xencons: Illegal ring page indices");
return -EINVAL;
}
@@ -179,10 +187,13 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
xencons->out_cons = intf->out_cons;
xencons->out_cons_same = 0;
}
+ if (!recv && xencons->out_cons_same++ > 1) {
+ eoiflag = XEN_EOI_FLAG_SPURIOUS;
+ }
+ spin_unlock_irqrestore(&xencons->ring_lock, flags);
+
if (recv) {
notify_daemon(xencons);
- } else if (xencons->out_cons_same++ > 1) {
- eoiflag = XEN_EOI_FLAG_SPURIOUS;
}
xen_irq_lateeoi(xencons->irq, eoiflag);
@@ -239,6 +250,7 @@ static int xen_hvm_console_init(void)
info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
+ spin_lock_init(&info->ring_lock);
} else if (info->intf != NULL) {
/* already configured */
return 0;
@@ -275,6 +287,7 @@ static int xen_hvm_console_init(void)
static int xencons_info_pv_init(struct xencons_info *info, int vtermno)
{
+ spin_lock_init(&info->ring_lock);
info->evtchn = xen_start_info->console.domU.evtchn;
/* GFN == MFN for PV guest */
info->intf = gfn_to_virt(xen_start_info->console.domU.mfn);
@@ -325,6 +338,7 @@ static int xen_initial_domain_console_init(void)
info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
+ spin_lock_init(&info->ring_lock);
}
info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false);
@@ -485,6 +499,7 @@ static int xencons_probe(struct xenbus_device *dev,
info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
+ spin_lock_init(&info->ring_lock);
dev_set_drvdata(&dev->dev, info);
info->xbdev = dev;
info->vtermno = xenbus_devid_to_vtermno(devid);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 049/122] hsr: Avoid double remove of a node.
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 048/122] hvc/xen: prevent concurrent accesses to the shared ring Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 050/122] x86/uaccess: Implement macros for CMPXCHG on user addresses Greg Kroah-Hartman
` (78 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sebastian Andrzej Siewior,
Jakub Kicinski, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Upstream commit 0c74d9f79ec4299365bbe803baa736ae0068179e ]
Due to the hashed-MAC optimisation one problem become visible:
hsr_handle_sup_frame() walks over the list of available nodes and merges
two node entries into one if based on the information in the supervision
both MAC addresses belong to one node. The list-walk happens on a RCU
protected list and delete operation happens under a lock.
If the supervision arrives on both slave interfaces at the same time
then this delete operation can occur simultaneously on two CPUs. The
result is the first-CPU deletes the from the list and the second CPUs
BUGs while attempting to dereference a poisoned list-entry. This happens
more likely with the optimisation because a new node for the mac_B entry
is created once a packet has been received and removed (merged) once the
supervision frame has been received.
Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field
which is set to true after the removal and checked before the removal.
Fixes: f266a683a4804 ("net/hsr: Better frame dispatch")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/hsr/hsr_framereg.c | 16 +++++++++++-----
net/hsr/hsr_framereg.h | 1 +
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c
index afc97d65cf2d8..87fc86aade5c9 100644
--- a/net/hsr/hsr_framereg.c
+++ b/net/hsr/hsr_framereg.c
@@ -327,9 +327,12 @@ void hsr_handle_sup_frame(struct hsr_frame_info *frame)
node_real->addr_B_port = port_rcv->type;
spin_lock_bh(&hsr->list_lock);
- list_del_rcu(&node_curr->mac_list);
+ if (!node_curr->removed) {
+ list_del_rcu(&node_curr->mac_list);
+ node_curr->removed = true;
+ kfree_rcu(node_curr, rcu_head);
+ }
spin_unlock_bh(&hsr->list_lock);
- kfree_rcu(node_curr, rcu_head);
done:
/* PRP uses v0 header */
@@ -506,9 +509,12 @@ void hsr_prune_nodes(struct timer_list *t)
if (time_is_before_jiffies(timestamp +
msecs_to_jiffies(HSR_NODE_FORGET_TIME))) {
hsr_nl_nodedown(hsr, node->macaddress_A);
- list_del_rcu(&node->mac_list);
- /* Note that we need to free this entry later: */
- kfree_rcu(node, rcu_head);
+ if (!node->removed) {
+ list_del_rcu(&node->mac_list);
+ node->removed = true;
+ /* Note that we need to free this entry later: */
+ kfree_rcu(node, rcu_head);
+ }
}
}
spin_unlock_bh(&hsr->list_lock);
diff --git a/net/hsr/hsr_framereg.h b/net/hsr/hsr_framereg.h
index 5a771cb3f0325..48990166e4c4e 100644
--- a/net/hsr/hsr_framereg.h
+++ b/net/hsr/hsr_framereg.h
@@ -82,6 +82,7 @@ struct hsr_node {
bool san_a;
bool san_b;
u16 seq_out[HSR_PT_PORTS];
+ bool removed;
struct rcu_head rcu_head;
};
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 050/122] x86/uaccess: Implement macros for CMPXCHG on user addresses
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 049/122] hsr: Avoid double remove of a node Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 051/122] seccomp: Invalidate seccomp mode to catch death failures Greg Kroah-Hartman
` (77 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Sean Christopherson, Paolo Bonzini, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 989b5db215a2f22f89d730b607b071d964780f10 ]
Add support for CMPXCHG loops on userspace addresses. Provide both an
"unsafe" version for tight loops that do their own uaccess begin/end, as
well as a "safe" version for use cases where the CMPXCHG is not buried in
a loop, e.g. KVM will resume the guest instead of looping when emulation
of a guest atomic accesses fails the CMPXCHG.
Provide 8-byte versions for 32-bit kernels so that KVM can do CMPXCHG on
guest PAE PTEs, which are accessed via userspace addresses.
Guard the asm_volatile_goto() variation with CC_HAS_ASM_GOTO_TIED_OUTPUT,
the "+m" constraint fails on some compilers that otherwise support
CC_HAS_ASM_GOTO_OUTPUT.
Cc: stable@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/uaccess.h | 142 +++++++++++++++++++++++++++++++++
1 file changed, 142 insertions(+)
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index bf2561a5eb581..68b910f30b222 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -414,6 +414,103 @@ do { \
#endif // CONFIG_CC_ASM_GOTO_OUTPUT
+#ifdef CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT
+#define __try_cmpxchg_user_asm(itype, ltype, _ptr, _pold, _new, label) ({ \
+ bool success; \
+ __typeof__(_ptr) _old = (__typeof__(_ptr))(_pold); \
+ __typeof__(*(_ptr)) __old = *_old; \
+ __typeof__(*(_ptr)) __new = (_new); \
+ asm_volatile_goto("\n" \
+ "1: " LOCK_PREFIX "cmpxchg"itype" %[new], %[ptr]\n"\
+ _ASM_EXTABLE_UA(1b, %l[label]) \
+ : CC_OUT(z) (success), \
+ [ptr] "+m" (*_ptr), \
+ [old] "+a" (__old) \
+ : [new] ltype (__new) \
+ : "memory" \
+ : label); \
+ if (unlikely(!success)) \
+ *_old = __old; \
+ likely(success); })
+
+#ifdef CONFIG_X86_32
+#define __try_cmpxchg64_user_asm(_ptr, _pold, _new, label) ({ \
+ bool success; \
+ __typeof__(_ptr) _old = (__typeof__(_ptr))(_pold); \
+ __typeof__(*(_ptr)) __old = *_old; \
+ __typeof__(*(_ptr)) __new = (_new); \
+ asm_volatile_goto("\n" \
+ "1: " LOCK_PREFIX "cmpxchg8b %[ptr]\n" \
+ _ASM_EXTABLE_UA(1b, %l[label]) \
+ : CC_OUT(z) (success), \
+ "+A" (__old), \
+ [ptr] "+m" (*_ptr) \
+ : "b" ((u32)__new), \
+ "c" ((u32)((u64)__new >> 32)) \
+ : "memory" \
+ : label); \
+ if (unlikely(!success)) \
+ *_old = __old; \
+ likely(success); })
+#endif // CONFIG_X86_32
+#else // !CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT
+#define __try_cmpxchg_user_asm(itype, ltype, _ptr, _pold, _new, label) ({ \
+ int __err = 0; \
+ bool success; \
+ __typeof__(_ptr) _old = (__typeof__(_ptr))(_pold); \
+ __typeof__(*(_ptr)) __old = *_old; \
+ __typeof__(*(_ptr)) __new = (_new); \
+ asm volatile("\n" \
+ "1: " LOCK_PREFIX "cmpxchg"itype" %[new], %[ptr]\n"\
+ CC_SET(z) \
+ "2:\n" \
+ _ASM_EXTABLE_TYPE_REG(1b, 2b, EX_TYPE_EFAULT_REG, \
+ %[errout]) \
+ : CC_OUT(z) (success), \
+ [errout] "+r" (__err), \
+ [ptr] "+m" (*_ptr), \
+ [old] "+a" (__old) \
+ : [new] ltype (__new) \
+ : "memory", "cc"); \
+ if (unlikely(__err)) \
+ goto label; \
+ if (unlikely(!success)) \
+ *_old = __old; \
+ likely(success); })
+
+#ifdef CONFIG_X86_32
+/*
+ * Unlike the normal CMPXCHG, hardcode ECX for both success/fail and error.
+ * There are only six GPRs available and four (EAX, EBX, ECX, and EDX) are
+ * hardcoded by CMPXCHG8B, leaving only ESI and EDI. If the compiler uses
+ * both ESI and EDI for the memory operand, compilation will fail if the error
+ * is an input+output as there will be no register available for input.
+ */
+#define __try_cmpxchg64_user_asm(_ptr, _pold, _new, label) ({ \
+ int __result; \
+ __typeof__(_ptr) _old = (__typeof__(_ptr))(_pold); \
+ __typeof__(*(_ptr)) __old = *_old; \
+ __typeof__(*(_ptr)) __new = (_new); \
+ asm volatile("\n" \
+ "1: " LOCK_PREFIX "cmpxchg8b %[ptr]\n" \
+ "mov $0, %%ecx\n\t" \
+ "setz %%cl\n" \
+ "2:\n" \
+ _ASM_EXTABLE_TYPE_REG(1b, 2b, EX_TYPE_EFAULT_REG, %%ecx) \
+ : [result]"=c" (__result), \
+ "+A" (__old), \
+ [ptr] "+m" (*_ptr) \
+ : "b" ((u32)__new), \
+ "c" ((u32)((u64)__new >> 32)) \
+ : "memory", "cc"); \
+ if (unlikely(__result < 0)) \
+ goto label; \
+ if (unlikely(!__result)) \
+ *_old = __old; \
+ likely(__result); })
+#endif // CONFIG_X86_32
+#endif // CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT
+
/* FIXME: this hack is definitely wrong -AK */
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct __user *)(x))
@@ -506,6 +603,51 @@ do { \
} while (0)
#endif // CONFIG_CC_HAS_ASM_GOTO_OUTPUT
+extern void __try_cmpxchg_user_wrong_size(void);
+
+#ifndef CONFIG_X86_32
+#define __try_cmpxchg64_user_asm(_ptr, _oldp, _nval, _label) \
+ __try_cmpxchg_user_asm("q", "r", (_ptr), (_oldp), (_nval), _label)
+#endif
+
+/*
+ * Force the pointer to u<size> to match the size expected by the asm helper.
+ * clang/LLVM compiles all cases and only discards the unused paths after
+ * processing errors, which breaks i386 if the pointer is an 8-byte value.
+ */
+#define unsafe_try_cmpxchg_user(_ptr, _oldp, _nval, _label) ({ \
+ bool __ret; \
+ __chk_user_ptr(_ptr); \
+ switch (sizeof(*(_ptr))) { \
+ case 1: __ret = __try_cmpxchg_user_asm("b", "q", \
+ (__force u8 *)(_ptr), (_oldp), \
+ (_nval), _label); \
+ break; \
+ case 2: __ret = __try_cmpxchg_user_asm("w", "r", \
+ (__force u16 *)(_ptr), (_oldp), \
+ (_nval), _label); \
+ break; \
+ case 4: __ret = __try_cmpxchg_user_asm("l", "r", \
+ (__force u32 *)(_ptr), (_oldp), \
+ (_nval), _label); \
+ break; \
+ case 8: __ret = __try_cmpxchg64_user_asm((__force u64 *)(_ptr), (_oldp),\
+ (_nval), _label); \
+ break; \
+ default: __try_cmpxchg_user_wrong_size(); \
+ } \
+ __ret; })
+
+/* "Returns" 0 on success, 1 on failure, -EFAULT if the access faults. */
+#define __try_cmpxchg_user(_ptr, _oldp, _nval, _label) ({ \
+ int __ret = -EFAULT; \
+ __uaccess_begin_nospec(); \
+ __ret = !unsafe_try_cmpxchg_user(_ptr, _oldp, _nval, _label); \
+_label: \
+ __uaccess_end(); \
+ __ret; \
+ })
+
/*
* We want the unsafe accessors to always be inlined and use
* the error labels - thus the macro games.
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 051/122] seccomp: Invalidate seccomp mode to catch death failures
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 050/122] x86/uaccess: Implement macros for CMPXCHG on user addresses Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 052/122] block: ataflop: fix breakage introduced at blk-mq refactoring Greg Kroah-Hartman
` (76 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Lutomirski, Will Drewry,
Kees Cook, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <keescook@chromium.org>
[ Upstream commit 495ac3069a6235bfdf516812a2a9b256671bbdf9 ]
If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/seccomp.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 305f0eca163ed..0b0331346e4be 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -29,6 +29,9 @@
#include <linux/syscalls.h>
#include <linux/sysctl.h>
+/* Not exposed in headers: strictly internal use only. */
+#define SECCOMP_MODE_DEAD (SECCOMP_MODE_FILTER + 1)
+
#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
#include <asm/syscall.h>
#endif
@@ -795,6 +798,7 @@ static void __secure_computing_strict(int this_syscall)
#ifdef SECCOMP_DEBUG
dump_stack();
#endif
+ current->seccomp.mode = SECCOMP_MODE_DEAD;
seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true);
do_exit(SIGKILL);
}
@@ -1023,6 +1027,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
case SECCOMP_RET_KILL_THREAD:
case SECCOMP_RET_KILL_PROCESS:
default:
+ current->seccomp.mode = SECCOMP_MODE_DEAD;
seccomp_log(this_syscall, SIGSYS, action, true);
/* Dump core only if this is the last remaining thread. */
if (action != SECCOMP_RET_KILL_THREAD ||
@@ -1075,6 +1080,11 @@ int __secure_computing(const struct seccomp_data *sd)
return 0;
case SECCOMP_MODE_FILTER:
return __seccomp_filter(this_syscall, sd, false);
+ /* Surviving SECCOMP_RET_KILL_* must be proactively impossible. */
+ case SECCOMP_MODE_DEAD:
+ WARN_ON_ONCE(1);
+ do_exit(SIGKILL);
+ return -1;
default:
BUG();
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 052/122] block: ataflop: fix breakage introduced at blk-mq refactoring
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 051/122] seccomp: Invalidate seccomp mode to catch death failures Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 053/122] powerpc/watchpoint: Workaround P10 DD1 issue with VSX-32 byte instructions Greg Kroah-Hartman
` (75 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Schmitz, linux-block,
Tetsuo Handa, Jens Axboe, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Schmitz <schmitzmic@gmail.com>
[ Upstream commit 86d46fdaa12ae5befc16b8d73fc85a3ca0399ea6 ]
Refactoring of the Atari floppy driver when converting to blk-mq
has broken the state machine in not-so-subtle ways:
finish_fdc() must be called when operations on the floppy device
have completed. This is crucial in order to relase the ST-DMA
lock, which protects against concurrent access to the ST-DMA
controller by other drivers (some DMA related, most just related
to device register access - broken beyond compare, I know).
When rewriting the driver's old do_request() function, the fact
that finish_fdc() was called only when all queued requests had
completed appears to have been overlooked. Instead, the new
request function calls finish_fdc() immediately after the last
request has been queued. finish_fdc() executes a dummy seek after
most requests, and this overwrites the state machine's interrupt
hander that was set up to wait for completion of the read/write
request just prior. To make matters worse, finish_fdc() is called
before device interrupts are re-enabled, making certain that the
read/write interupt is missed.
Shifting the finish_fdc() call into the read/write request
completion handler ensures the driver waits for the request to
actually complete. With a queue depth of 2, we won't see long
request sequences, so calling finish_fdc() unconditionally just
adds a little overhead for the dummy seeks, and keeps the code
simple.
While we're at it, kill ataflop_commit_rqs() which does nothing
but run finish_fdc() unconditionally, again likely wiping out an
in-flight request.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95 ("ataflop: convert to blk-mq")
CC: linux-block@vger.kernel.org
CC: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/r/20211019061321.26425-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/block/ataflop.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 3e881fdb06e0a..cd612cd04767a 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -653,9 +653,6 @@ static inline void copy_buffer(void *from, void *to)
*p2++ = *p1++;
}
-
-
-
/* General Interrupt Handling */
static void (*FloppyIRQHandler)( int status ) = NULL;
@@ -1225,6 +1222,7 @@ static void fd_rwsec_done1(int status)
}
else {
/* all sectors finished */
+ finish_fdc();
fd_end_request_cur(BLK_STS_OK);
}
return;
@@ -1472,15 +1470,6 @@ static void setup_req_params( int drive )
ReqTrack, ReqSector, (unsigned long)ReqData ));
}
-static void ataflop_commit_rqs(struct blk_mq_hw_ctx *hctx)
-{
- spin_lock_irq(&ataflop_lock);
- atari_disable_irq(IRQ_MFP_FDC);
- finish_fdc();
- atari_enable_irq(IRQ_MFP_FDC);
- spin_unlock_irq(&ataflop_lock);
-}
-
static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
const struct blk_mq_queue_data *bd)
{
@@ -1488,6 +1477,8 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
int drive = floppy - unit;
int type = floppy->type;
+ DPRINT(("Queue request: drive %d type %d last %d\n", drive, type, bd->last));
+
spin_lock_irq(&ataflop_lock);
if (fd_request) {
spin_unlock_irq(&ataflop_lock);
@@ -1547,8 +1538,6 @@ static blk_status_t ataflop_queue_rq(struct blk_mq_hw_ctx *hctx,
setup_req_params( drive );
do_fd_action( drive );
- if (bd->last)
- finish_fdc();
atari_enable_irq( IRQ_MFP_FDC );
out:
@@ -1959,7 +1948,6 @@ static const struct block_device_operations floppy_fops = {
static const struct blk_mq_ops ataflop_mq_ops = {
.queue_rq = ataflop_queue_rq,
- .commit_rqs = ataflop_commit_rqs,
};
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 053/122] powerpc/watchpoint: Workaround P10 DD1 issue with VSX-32 byte instructions
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 052/122] block: ataflop: fix breakage introduced at blk-mq refactoring Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 054/122] powerpc/watchpoints: Annotate atomic context in more places Greg Kroah-Hartman
` (74 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ravi Bangoria, Michael Ellerman,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
[ Upstream commit 3d2ffcdd2a982e8bbe65fa0f94fb21bf304c281e ]
POWER10 DD1 has an issue where it generates watchpoint exceptions when
it shouldn't. The conditions where this occur are:
- octword op
- ending address of DAWR range is less than starting address of op
- those addresses need to be in the same or in two consecutive 512B
blocks
- 'op address + 64B' generates an address that has a carry into bit
52 (crosses 2K boundary)
Handle such spurious exception by considering them as extraneous and
emulating/single-steeping instruction without generating an event.
[ravi: Fixed build warning reported by lkp@intel.com]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201106045650.278987-1-ravi.bangoria@linux.ibm.com
Stable-dep-of: 27646b2e02b0 ("powerpc/watchpoints: Annotate atomic context in more places")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/hw_breakpoint.c | 67 ++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 6e5bed50c3578..49273f67c7498 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -504,6 +504,11 @@ static bool is_larx_stcx_instr(int type)
return type == LARX || type == STCX;
}
+static bool is_octword_vsx_instr(int type, int size)
+{
+ return ((type == LOAD_VSX || type == STORE_VSX) && size == 32);
+}
+
/*
* We've failed in reliably handling the hw-breakpoint. Unregister
* it and throw a warning message to let the user know about it.
@@ -554,6 +559,58 @@ static bool stepping_handler(struct pt_regs *regs, struct perf_event **bp,
return true;
}
+static void handle_p10dd1_spurious_exception(struct arch_hw_breakpoint **info,
+ int *hit, unsigned long ea)
+{
+ int i;
+ unsigned long hw_end_addr;
+
+ /*
+ * Handle spurious exception only when any bp_per_reg is set.
+ * Otherwise this might be created by xmon and not actually a
+ * spurious exception.
+ */
+ for (i = 0; i < nr_wp_slots(); i++) {
+ if (!info[i])
+ continue;
+
+ hw_end_addr = ALIGN(info[i]->address + info[i]->len, HW_BREAKPOINT_SIZE);
+
+ /*
+ * Ending address of DAWR range is less than starting
+ * address of op.
+ */
+ if ((hw_end_addr - 1) >= ea)
+ continue;
+
+ /*
+ * Those addresses need to be in the same or in two
+ * consecutive 512B blocks;
+ */
+ if (((hw_end_addr - 1) >> 10) != (ea >> 10))
+ continue;
+
+ /*
+ * 'op address + 64B' generates an address that has a
+ * carry into bit 52 (crosses 2K boundary).
+ */
+ if ((ea & 0x800) == ((ea + 64) & 0x800))
+ continue;
+
+ break;
+ }
+
+ if (i == nr_wp_slots())
+ return;
+
+ for (i = 0; i < nr_wp_slots(); i++) {
+ if (info[i]) {
+ hit[i] = 1;
+ info[i]->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
+ }
+ }
+}
+
int hw_breakpoint_handler(struct die_args *args)
{
bool err = false;
@@ -612,8 +669,14 @@ int hw_breakpoint_handler(struct die_args *args)
goto reset;
if (!nr_hit) {
- rc = NOTIFY_DONE;
- goto out;
+ /* Workaround for Power10 DD1 */
+ if (!IS_ENABLED(CONFIG_PPC_8xx) && mfspr(SPRN_PVR) == 0x800100 &&
+ is_octword_vsx_instr(type, size)) {
+ handle_p10dd1_spurious_exception(info, hit, ea);
+ } else {
+ rc = NOTIFY_DONE;
+ goto out;
+ }
}
/*
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 054/122] powerpc/watchpoints: Annotate atomic context in more places
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 053/122] powerpc/watchpoint: Workaround P10 DD1 issue with VSX-32 byte instructions Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 055/122] cifs: add a warning when the in-flight count goes negative Greg Kroah-Hartman
` (73 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Benjamin Gray, Michael Ellerman,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Gray <bgray@linux.ibm.com>
[ Upstream commit 27646b2e02b096a6936b3e3b6ba334ae20763eab ]
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-4-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/powerpc/kernel/hw_breakpoint.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 49273f67c7498..ca3374c6f3749 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -611,6 +611,11 @@ static void handle_p10dd1_spurious_exception(struct arch_hw_breakpoint **info,
}
}
+/*
+ * Handle a DABR or DAWR exception.
+ *
+ * Called in atomic context.
+ */
int hw_breakpoint_handler(struct die_args *args)
{
bool err = false;
@@ -737,6 +742,8 @@ NOKPROBE_SYMBOL(hw_breakpoint_handler);
/*
* Handle single-step exceptions following a DABR hit.
+ *
+ * Called in atomic context.
*/
static int single_step_dabr_instruction(struct die_args *args)
{
@@ -794,6 +801,8 @@ NOKPROBE_SYMBOL(single_step_dabr_instruction);
/*
* Handle debug exception notifications.
+ *
+ * Called in atomic context.
*/
int hw_breakpoint_exceptions_notify(
struct notifier_block *unused, unsigned long val, void *data)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 055/122] cifs: add a warning when the in-flight count goes negative
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 054/122] powerpc/watchpoints: Annotate atomic context in more places Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 056/122] mtd: spinand: macronix: Add support for MX35LFxGE4AD Greg Kroah-Hartman
` (72 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shyam Prasad N, Bharath SM,
Steve French, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N <sprasad@microsoft.com>
[ Upstream commit e4645cc2f1e2d6f268bb8dcfac40997c52432aed ]
We've seen the in-flight count go into negative with some
internal stress testing in Microsoft.
Adding a WARN when this happens, in hope of understanding
why this happens when it happens.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smb2ops.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index f83901c1c17a5..b2a7238a34221 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -82,6 +82,7 @@ smb2_add_credits(struct TCP_Server_Info *server,
*val = 65000; /* Don't get near 64K credits, avoid srv bugs */
pr_warn_once("server overflowed SMB3 credits\n");
}
+ WARN_ON_ONCE(server->in_flight == 0);
server->in_flight--;
if (server->in_flight == 0 && (optype & CIFS_OP_MASK) != CIFS_NEG_OP)
rc = change_conf(server);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 056/122] mtd: spinand: macronix: Add support for MX35LFxGE4AD
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 055/122] cifs: add a warning when the in-flight count goes negative Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 057/122] ASoC: Intel: boards: harden codec property handling Greg Kroah-Hartman
` (71 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, YouChing Lin, Miquel Raynal,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: YouChing Lin <ycllin@mxic.com.tw>
[ Upstream commit 5ece78de88739b4c68263e9f2582380c1fd8314f ]
The Macronix MX35LF2GE4AD / MX35LF4GE4AD are 3V, 2G / 4Gbit serial
SLC NAND flash device (with on-die ECC).
Validated by read, erase, read back, write, read back and nandtest
on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host
(drivers/spi/spi-mxic.c).
Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1604561020-13499-1-git-send-email-ycllin@mxic.com.tw
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/spi/macronix.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index cd7a9cacc3fbf..8bd3f6bf9b103 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -119,6 +119,26 @@ static const struct spinand_info macronix_spinand_table[] = {
&update_cache_variants),
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
+ SPINAND_INFO("MX35LF2GE4AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x26),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35LF4GE4AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x37),
+ NAND_MEMORG(1, 4096, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
SPINAND_INFO("MX31LF1GE4BC",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x1e),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 057/122] ASoC: Intel: boards: harden codec property handling
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 056/122] mtd: spinand: macronix: Add support for MX35LFxGE4AD Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 058/122] ASoC: Intel: boards: get codec device with ACPI instead of bus search Greg Kroah-Hartman
` (70 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Hans de Goede,
Pierre-Louis Bossart, Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ Upstream commit c50f126b3c9ebb77585838726a3a490ad33b92cd ]
In current ACPI-based devices, the DSDT does not include any of the
properties required by the codec driver. This is not an ACPI
limitation proper since the _DSD method could be used, as done for
Camera and SoundWire in newer platforms. For legacy devices, there is
unfortunately no other option than using a work-around: we add
properties to the codec device from the machine driver.
To avoid any issues with the codec driver being unbound, we need to
keep a reference to the codec device until the card is removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 721858823d7c ("ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/boards/bytcht_es8316.c | 12 +++++--
sound/soc/intel/boards/bytcr_rt5640.c | 47 +++++++++++++++++---------
sound/soc/intel/boards/bytcr_rt5651.c | 37 +++++++++++++-------
3 files changed, 64 insertions(+), 32 deletions(-)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 81269ed5a2aaa..91351b8536aa1 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -37,6 +37,7 @@ struct byt_cht_es8316_private {
struct clk *mclk;
struct snd_soc_jack jack;
struct gpio_desc *speaker_en_gpio;
+ struct device *codec_dev;
bool speaker_en;
};
@@ -569,7 +570,7 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
gpiod_get_index(codec_dev, "speaker-enable", 0,
/* see comment in byt_cht_es8316_resume */
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
- put_device(codec_dev);
+ priv->codec_dev = codec_dev;
if (IS_ERR(priv->speaker_en_gpio)) {
ret = PTR_ERR(priv->speaker_en_gpio);
@@ -581,7 +582,7 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
dev_err(dev, "get speaker GPIO failed: %d\n", ret);
fallthrough;
case -EPROBE_DEFER:
- return ret;
+ goto err_put_codec;
}
}
@@ -604,10 +605,14 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
if (ret) {
gpiod_put(priv->speaker_en_gpio);
dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
- return ret;
+ goto err_put_codec;
}
platform_set_drvdata(pdev, &byt_cht_es8316_card);
return 0;
+
+err_put_codec:
+ put_device(priv->codec_dev);
+ return ret;
}
static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev)
@@ -616,6 +621,7 @@ static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev)
struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
gpiod_put(priv->speaker_en_gpio);
+ put_device(priv->codec_dev);
return 0;
}
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 9a5ab96f917d3..b531c348fb697 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -86,6 +86,7 @@ enum {
struct byt_rt5640_private {
struct snd_soc_jack jack;
struct clk *mclk;
+ struct device *codec_dev;
};
static bool is_bytcr;
@@ -941,15 +942,11 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
* Note this MUST be called before snd_soc_register_card(), so that the props
* are in place before the codec component driver's probe function parses them.
*/
-static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name)
+static int byt_rt5640_add_codec_device_props(struct device *i2c_dev,
+ struct byt_rt5640_private *priv)
{
struct property_entry props[MAX_NO_PROPS] = {};
- struct device *i2c_dev;
- int ret, cnt = 0;
-
- i2c_dev = bus_find_device_by_name(&i2c_bus_type, NULL, i2c_dev_name);
- if (!i2c_dev)
- return -EPROBE_DEFER;
+ int cnt = 0;
switch (BYT_RT5640_MAP(byt_rt5640_quirk)) {
case BYT_RT5640_DMIC1_MAP:
@@ -989,10 +986,7 @@ static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name)
if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV)
props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted");
- ret = device_add_properties(i2c_dev, props);
- put_device(i2c_dev);
-
- return ret;
+ return device_add_properties(i2c_dev, props);
}
static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
@@ -1324,6 +1318,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
struct snd_soc_acpi_mach *mach;
const char *platform_name;
struct acpi_device *adev;
+ struct device *codec_dev;
int ret_val = 0;
int dai_index = 0;
int i, cfg_spk;
@@ -1430,10 +1425,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
byt_rt5640_quirk = quirk_override;
}
+ codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, byt_rt5640_codec_name);
+ if (!codec_dev)
+ return -EPROBE_DEFER;
+
+ priv->codec_dev = codec_dev;
+
/* Must be called before register_card, also see declaration comment. */
- ret_val = byt_rt5640_add_codec_device_props(byt_rt5640_codec_name);
+ ret_val = byt_rt5640_add_codec_device_props(codec_dev, priv);
if (ret_val)
- return ret_val;
+ goto err;
log_quirks(&pdev->dev);
@@ -1460,7 +1461,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
* for all other errors, including -EPROBE_DEFER
*/
if (ret_val != -ENOENT)
- return ret_val;
+ goto err;
byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
}
}
@@ -1493,17 +1494,30 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5640_card,
platform_name);
if (ret_val)
- return ret_val;
+ goto err;
ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card);
if (ret_val) {
dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
ret_val);
- return ret_val;
+ goto err;
}
platform_set_drvdata(pdev, &byt_rt5640_card);
return ret_val;
+
+err:
+ put_device(priv->codec_dev);
+ return ret_val;
+}
+
+static int snd_byt_rt5640_mc_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card);
+
+ put_device(priv->codec_dev);
+ return 0;
}
static struct platform_driver snd_byt_rt5640_mc_driver = {
@@ -1514,6 +1528,7 @@ static struct platform_driver snd_byt_rt5640_mc_driver = {
#endif
},
.probe = snd_byt_rt5640_mc_probe,
+ .remove = snd_byt_rt5640_mc_remove,
};
module_platform_driver(snd_byt_rt5640_mc_driver);
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index bf8b87d45cb0a..acea83e814acb 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -85,6 +85,7 @@ struct byt_rt5651_private {
struct gpio_desc *ext_amp_gpio;
struct gpio_desc *hp_detect;
struct snd_soc_jack jack;
+ struct device *codec_dev;
};
static const struct acpi_gpio_mapping *byt_rt5651_gpios;
@@ -995,12 +996,12 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
byt_rt5651_quirk = quirk_override;
}
+ priv->codec_dev = codec_dev;
+
/* Must be called before register_card, also see declaration comment. */
ret_val = byt_rt5651_add_codec_device_props(codec_dev);
- if (ret_val) {
- put_device(codec_dev);
- return ret_val;
- }
+ if (ret_val)
+ goto err;
/* Cherry Trail devices use an external amplifier enable gpio */
if (soc_intel_is_cht() && !byt_rt5651_gpios)
@@ -1024,8 +1025,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
ret_val);
fallthrough;
case -EPROBE_DEFER:
- put_device(codec_dev);
- return ret_val;
+ goto err;
}
}
priv->hp_detect = devm_fwnode_gpiod_get(&pdev->dev,
@@ -1044,14 +1044,11 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
ret_val);
fallthrough;
case -EPROBE_DEFER:
- put_device(codec_dev);
- return ret_val;
+ goto err;
}
}
}
- put_device(codec_dev);
-
log_quirks(&pdev->dev);
if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) ||
@@ -1075,7 +1072,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
* for all other errors, including -EPROBE_DEFER
*/
if (ret_val != -ENOENT)
- return ret_val;
+ goto err;
byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
}
}
@@ -1104,17 +1101,30 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5651_card,
platform_name);
if (ret_val)
- return ret_val;
+ goto err;
ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
if (ret_val) {
dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
ret_val);
- return ret_val;
+ goto err;
}
platform_set_drvdata(pdev, &byt_rt5651_card);
return ret_val;
+
+err:
+ put_device(priv->codec_dev);
+ return ret_val;
+}
+
+static int snd_byt_rt5651_mc_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
+
+ put_device(priv->codec_dev);
+ return 0;
}
static struct platform_driver snd_byt_rt5651_mc_driver = {
@@ -1125,6 +1135,7 @@ static struct platform_driver snd_byt_rt5651_mc_driver = {
#endif
},
.probe = snd_byt_rt5651_mc_probe,
+ .remove = snd_byt_rt5651_mc_remove,
};
module_platform_driver(snd_byt_rt5651_mc_driver);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 058/122] ASoC: Intel: boards: get codec device with ACPI instead of bus search
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 057/122] ASoC: Intel: boards: harden codec property handling Greg Kroah-Hartman
@ 2024-02-27 13:26 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 059/122] ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use Greg Kroah-Hartman
` (69 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:26 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Hans de Goede,
Pierre-Louis Bossart, Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ Upstream commit d3409eb20d3ed7d9e021cd13243e9e63255a315f ]
We have an existing 'adev' handle from which we can find the codec
device, no need for an I2C bus search.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 721858823d7c ("ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/boards/bytcht_es8316.c | 4 ++--
sound/soc/intel/boards/bytcr_rt5640.c | 5 ++---
sound/soc/intel/boards/bytcr_rt5651.c | 6 ++----
3 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 91351b8536aa1..03b9cdbd3170f 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -550,9 +550,10 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
}
/* get speaker enable GPIO */
- codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, codec_name);
+ codec_dev = acpi_get_first_physical_node(adev);
if (!codec_dev)
return -EPROBE_DEFER;
+ priv->codec_dev = get_device(codec_dev);
if (quirk & BYT_CHT_ES8316_JD_INVERTED)
props[cnt++] = PROPERTY_ENTRY_BOOL("everest,jack-detect-inverted");
@@ -570,7 +571,6 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
gpiod_get_index(codec_dev, "speaker-enable", 0,
/* see comment in byt_cht_es8316_resume */
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
- priv->codec_dev = codec_dev;
if (IS_ERR(priv->speaker_en_gpio)) {
ret = PTR_ERR(priv->speaker_en_gpio);
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index b531c348fb697..f5b1b3b876980 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -1425,11 +1425,10 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
byt_rt5640_quirk = quirk_override;
}
- codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, byt_rt5640_codec_name);
+ codec_dev = acpi_get_first_physical_node(adev);
if (!codec_dev)
return -EPROBE_DEFER;
-
- priv->codec_dev = codec_dev;
+ priv->codec_dev = get_device(codec_dev);
/* Must be called before register_card, also see declaration comment. */
ret_val = byt_rt5640_add_codec_device_props(codec_dev, priv);
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index acea83e814acb..472f6e3327960 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -926,10 +926,10 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
return -ENODEV;
}
- codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL,
- byt_rt5651_codec_name);
+ codec_dev = acpi_get_first_physical_node(adev);
if (!codec_dev)
return -EPROBE_DEFER;
+ priv->codec_dev = get_device(codec_dev);
/*
* swap SSP0 if bytcr is detected
@@ -996,8 +996,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
byt_rt5651_quirk = quirk_override;
}
- priv->codec_dev = codec_dev;
-
/* Must be called before register_card, also see declaration comment. */
ret_val = byt_rt5651_add_codec_device_props(codec_dev);
if (ret_val)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 059/122] ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2024-02-27 13:26 ` [PATCH 5.10 058/122] ASoC: Intel: boards: get codec device with ACPI instead of bus search Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 060/122] task_stack, x86/cea: Force-inline stack helpers Greg Kroah-Hartman
` (68 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko,
Pierre-Louis Bossart, Mark Brown, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 721858823d7cdc8f2a897579b040e935989f6f02 ]
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 02c0a3b3047f ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230112112852.67714-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 472f6e3327960..a8289f74463e9 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -919,7 +919,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
if (adev) {
snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name),
"i2c-%s", acpi_dev_name(adev));
- put_device(&adev->dev);
byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name;
} else {
dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
@@ -927,6 +926,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
}
codec_dev = acpi_get_first_physical_node(adev);
+ acpi_dev_put(adev);
if (!codec_dev)
return -EPROBE_DEFER;
priv->codec_dev = get_device(codec_dev);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 060/122] task_stack, x86/cea: Force-inline stack helpers
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 059/122] ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 061/122] btrfs: tree-checker: check for overlapping extent items Greg Kroah-Hartman
` (67 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Borislav Petkov,
Peter Zijlstra (Intel), Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <bp@suse.de>
[ Upstream commit e87f4152e542610d0b4c6c8548964a68a59d2040 ]
Force-inline two stack helpers to fix the following objtool warnings:
vmlinux.o: warning: objtool: in_task_stack()+0xc: call to task_stack_page() leaves .noinstr.text section
vmlinux.o: warning: objtool: in_entry_stack()+0x10: call to cpu_entry_stack() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220324183607.31717-2-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/include/asm/cpu_entry_area.h | 2 +-
include/linux/sched/task_stack.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h
index dd5ea1bdf04c5..75efc4c6f0766 100644
--- a/arch/x86/include/asm/cpu_entry_area.h
+++ b/arch/x86/include/asm/cpu_entry_area.h
@@ -143,7 +143,7 @@ extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags);
extern struct cpu_entry_area *get_cpu_entry_area(int cpu);
-static inline struct entry_stack *cpu_entry_stack(int cpu)
+static __always_inline struct entry_stack *cpu_entry_stack(int cpu)
{
return &get_cpu_entry_area(cpu)->entry_stack_page.stack;
}
diff --git a/include/linux/sched/task_stack.h b/include/linux/sched/task_stack.h
index f24575942dabe..879a5c8f930b6 100644
--- a/include/linux/sched/task_stack.h
+++ b/include/linux/sched/task_stack.h
@@ -16,7 +16,7 @@
* try_get_task_stack() instead. task_stack_page will return a pointer
* that could get freed out from under you.
*/
-static inline void *task_stack_page(const struct task_struct *task)
+static __always_inline void *task_stack_page(const struct task_struct *task)
{
return task->stack;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 061/122] btrfs: tree-checker: check for overlapping extent items
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 060/122] task_stack, x86/cea: Force-inline stack helpers Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 062/122] btrfs: introduce btrfs_lookup_match_dir Greg Kroah-Hartman
` (66 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Qu Wenruo, Josef Bacik, David Sterba,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josef Bacik <josef@toxicpanda.com>
[ Upstream commit 899b7f69f244e539ea5df1b4d756046337de44a5 ]
We're seeing a weird problem in production where we have overlapping
extent items in the extent tree. It's unclear where these are coming
from, and in debugging we realized there's no check in the tree checker
for this sort of problem. Add a check to the tree-checker to make sure
that the extents do not overlap each other.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/tree-checker.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c
index c0eda3816f685..5b952f69bc1f6 100644
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -1189,7 +1189,8 @@ static void extent_err(const struct extent_buffer *eb, int slot,
}
static int check_extent_item(struct extent_buffer *leaf,
- struct btrfs_key *key, int slot)
+ struct btrfs_key *key, int slot,
+ struct btrfs_key *prev_key)
{
struct btrfs_fs_info *fs_info = leaf->fs_info;
struct btrfs_extent_item *ei;
@@ -1400,6 +1401,26 @@ static int check_extent_item(struct extent_buffer *leaf,
total_refs, inline_refs);
return -EUCLEAN;
}
+
+ if ((prev_key->type == BTRFS_EXTENT_ITEM_KEY) ||
+ (prev_key->type == BTRFS_METADATA_ITEM_KEY)) {
+ u64 prev_end = prev_key->objectid;
+
+ if (prev_key->type == BTRFS_METADATA_ITEM_KEY)
+ prev_end += fs_info->nodesize;
+ else
+ prev_end += prev_key->offset;
+
+ if (unlikely(prev_end > key->objectid)) {
+ extent_err(leaf, slot,
+ "previous extent [%llu %u %llu] overlaps current extent [%llu %u %llu]",
+ prev_key->objectid, prev_key->type,
+ prev_key->offset, key->objectid, key->type,
+ key->offset);
+ return -EUCLEAN;
+ }
+ }
+
return 0;
}
@@ -1568,7 +1589,7 @@ static int check_leaf_item(struct extent_buffer *leaf,
break;
case BTRFS_EXTENT_ITEM_KEY:
case BTRFS_METADATA_ITEM_KEY:
- ret = check_extent_item(leaf, key, slot);
+ ret = check_extent_item(leaf, key, slot, prev_key);
break;
case BTRFS_TREE_BLOCK_REF_KEY:
case BTRFS_SHARED_DATA_REF_KEY:
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 062/122] btrfs: introduce btrfs_lookup_match_dir
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 061/122] btrfs: tree-checker: check for overlapping extent items Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 063/122] btrfs: unify lookup return value when dir entry is missing Greg Kroah-Hartman
` (65 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marcos Paulo de Souza, David Sterba,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcos Paulo de Souza <mpdesouza@suse.com>
[ Upstream commit a7d1c5dc8632e9b370ad26478c468d4e4e29f263 ]
btrfs_search_slot is called in multiple places in dir-item.c to search
for a dir entry, and then calling btrfs_match_dir_name to return a
btrfs_dir_item.
In order to reduce the number of callers of btrfs_search_slot, create a
common function that looks for the dir key, and if found call
btrfs_match_dir_item_name.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8dcbc26194eb ("btrfs: unify lookup return value when dir entry is missing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/dir-item.c | 76 +++++++++++++++++++++++----------------------
1 file changed, 39 insertions(+), 37 deletions(-)
diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c
index 863367c2c6205..1c0a7cd6b9b0a 100644
--- a/fs/btrfs/dir-item.c
+++ b/fs/btrfs/dir-item.c
@@ -171,6 +171,25 @@ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, const char *name,
return 0;
}
+static struct btrfs_dir_item *btrfs_lookup_match_dir(
+ struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct btrfs_path *path,
+ struct btrfs_key *key, const char *name,
+ int name_len, int mod)
+{
+ const int ins_len = (mod < 0 ? -1 : 0);
+ const int cow = (mod != 0);
+ int ret;
+
+ ret = btrfs_search_slot(trans, root, key, path, ins_len, cow);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ if (ret > 0)
+ return ERR_PTR(-ENOENT);
+
+ return btrfs_match_dir_item_name(root->fs_info, path, name, name_len);
+}
+
/*
* lookup a directory item based on name. 'dir' is the objectid
* we're searching in, and 'mod' tells us if you plan on deleting the
@@ -182,23 +201,18 @@ struct btrfs_dir_item *btrfs_lookup_dir_item(struct btrfs_trans_handle *trans,
const char *name, int name_len,
int mod)
{
- int ret;
struct btrfs_key key;
- int ins_len = mod < 0 ? -1 : 0;
- int cow = mod != 0;
+ struct btrfs_dir_item *di;
key.objectid = dir;
key.type = BTRFS_DIR_ITEM_KEY;
-
key.offset = btrfs_name_hash(name, name_len);
- ret = btrfs_search_slot(trans, root, &key, path, ins_len, cow);
- if (ret < 0)
- return ERR_PTR(ret);
- if (ret > 0)
+ di = btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod);
+ if (IS_ERR(di) && PTR_ERR(di) == -ENOENT)
return NULL;
- return btrfs_match_dir_item_name(root->fs_info, path, name, name_len);
+ return di;
}
int btrfs_check_dir_item_collision(struct btrfs_root *root, u64 dir,
@@ -212,7 +226,6 @@ int btrfs_check_dir_item_collision(struct btrfs_root *root, u64 dir,
int slot;
struct btrfs_path *path;
-
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
@@ -221,20 +234,20 @@ int btrfs_check_dir_item_collision(struct btrfs_root *root, u64 dir,
key.type = BTRFS_DIR_ITEM_KEY;
key.offset = btrfs_name_hash(name, name_len);
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
-
- /* return back any errors */
- if (ret < 0)
- goto out;
+ di = btrfs_lookup_match_dir(NULL, root, path, &key, name, name_len, 0);
+ if (IS_ERR(di)) {
+ ret = PTR_ERR(di);
+ /* Nothing found, we're safe */
+ if (ret == -ENOENT) {
+ ret = 0;
+ goto out;
+ }
- /* nothing found, we're safe */
- if (ret > 0) {
- ret = 0;
- goto out;
+ if (ret < 0)
+ goto out;
}
/* we found an item, look for our name in the item */
- di = btrfs_match_dir_item_name(root->fs_info, path, name, name_len);
if (di) {
/* our exact name was found */
ret = -EEXIST;
@@ -275,21 +288,13 @@ btrfs_lookup_dir_index_item(struct btrfs_trans_handle *trans,
u64 objectid, const char *name, int name_len,
int mod)
{
- int ret;
struct btrfs_key key;
- int ins_len = mod < 0 ? -1 : 0;
- int cow = mod != 0;
key.objectid = dir;
key.type = BTRFS_DIR_INDEX_KEY;
key.offset = objectid;
- ret = btrfs_search_slot(trans, root, &key, path, ins_len, cow);
- if (ret < 0)
- return ERR_PTR(ret);
- if (ret > 0)
- return ERR_PTR(-ENOENT);
- return btrfs_match_dir_item_name(root->fs_info, path, name, name_len);
+ return btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod);
}
struct btrfs_dir_item *
@@ -346,21 +351,18 @@ struct btrfs_dir_item *btrfs_lookup_xattr(struct btrfs_trans_handle *trans,
const char *name, u16 name_len,
int mod)
{
- int ret;
struct btrfs_key key;
- int ins_len = mod < 0 ? -1 : 0;
- int cow = mod != 0;
+ struct btrfs_dir_item *di;
key.objectid = dir;
key.type = BTRFS_XATTR_ITEM_KEY;
key.offset = btrfs_name_hash(name, name_len);
- ret = btrfs_search_slot(trans, root, &key, path, ins_len, cow);
- if (ret < 0)
- return ERR_PTR(ret);
- if (ret > 0)
+
+ di = btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod);
+ if (IS_ERR(di) && PTR_ERR(di) == -ENOENT)
return NULL;
- return btrfs_match_dir_item_name(root->fs_info, path, name, name_len);
+ return di;
}
/*
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 063/122] btrfs: unify lookup return value when dir entry is missing
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 062/122] btrfs: introduce btrfs_lookup_match_dir Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 064/122] btrfs: do not pin logs too early during renames Greg Kroah-Hartman
` (64 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Filipe Manana, David Sterba,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
[ Upstream commit 8dcbc26194eb872cc3430550fb70bb461424d267 ]
btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir
entries and both are used during log replay or when updating a log tree
during an unlink.
However when the dir item does not exists, btrfs_lookup_dir_item() returns
NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if
the dir item exists but there is no matching entry for a given name or
index, both return NULL. This makes the call sites during log replay to
be more verbose than necessary and it makes it easy to miss this slight
difference. Since we don't need to distinguish between those two cases,
make btrfs_lookup_dir_index_item() always return NULL when there is no
matching directory entry - either because there isn't any dir entry or
because there is one but it does not match the given name and index.
Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to
'index' since it is supposed to match an index number, and the name
'objectid' is not very good because it can easily be confused with an
inode number (like the inode number a dir entry points to).
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/ctree.h | 2 +-
fs/btrfs/dir-item.c | 48 ++++++++++++++++++++++++++++++++++-----------
fs/btrfs/tree-log.c | 14 ++++---------
3 files changed, 42 insertions(+), 22 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 67831868ef0de..3ddb09f2b1685 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2879,7 +2879,7 @@ struct btrfs_dir_item *
btrfs_lookup_dir_index_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, u64 dir,
- u64 objectid, const char *name, int name_len,
+ u64 index, const char *name, int name_len,
int mod);
struct btrfs_dir_item *
btrfs_search_dir_index_item(struct btrfs_root *root,
diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c
index 1c0a7cd6b9b0a..98c6faa8ce15b 100644
--- a/fs/btrfs/dir-item.c
+++ b/fs/btrfs/dir-item.c
@@ -191,9 +191,20 @@ static struct btrfs_dir_item *btrfs_lookup_match_dir(
}
/*
- * lookup a directory item based on name. 'dir' is the objectid
- * we're searching in, and 'mod' tells us if you plan on deleting the
- * item (use mod < 0) or changing the options (use mod > 0)
+ * Lookup for a directory item by name.
+ *
+ * @trans: The transaction handle to use. Can be NULL if @mod is 0.
+ * @root: The root of the target tree.
+ * @path: Path to use for the search.
+ * @dir: The inode number (objectid) of the directory.
+ * @name: The name associated to the directory entry we are looking for.
+ * @name_len: The length of the name.
+ * @mod: Used to indicate if the tree search is meant for a read only
+ * lookup, for a modification lookup or for a deletion lookup, so
+ * its value should be 0, 1 or -1, respectively.
+ *
+ * Returns: NULL if the dir item does not exists, an error pointer if an error
+ * happened, or a pointer to a dir item if a dir item exists for the given name.
*/
struct btrfs_dir_item *btrfs_lookup_dir_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
@@ -274,27 +285,42 @@ int btrfs_check_dir_item_collision(struct btrfs_root *root, u64 dir,
}
/*
- * lookup a directory item based on index. 'dir' is the objectid
- * we're searching in, and 'mod' tells us if you plan on deleting the
- * item (use mod < 0) or changing the options (use mod > 0)
+ * Lookup for a directory index item by name and index number.
*
- * The name is used to make sure the index really points to the name you were
- * looking for.
+ * @trans: The transaction handle to use. Can be NULL if @mod is 0.
+ * @root: The root of the target tree.
+ * @path: Path to use for the search.
+ * @dir: The inode number (objectid) of the directory.
+ * @index: The index number.
+ * @name: The name associated to the directory entry we are looking for.
+ * @name_len: The length of the name.
+ * @mod: Used to indicate if the tree search is meant for a read only
+ * lookup, for a modification lookup or for a deletion lookup, so
+ * its value should be 0, 1 or -1, respectively.
+ *
+ * Returns: NULL if the dir index item does not exists, an error pointer if an
+ * error happened, or a pointer to a dir item if the dir index item exists and
+ * matches the criteria (name and index number).
*/
struct btrfs_dir_item *
btrfs_lookup_dir_index_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, u64 dir,
- u64 objectid, const char *name, int name_len,
+ u64 index, const char *name, int name_len,
int mod)
{
+ struct btrfs_dir_item *di;
struct btrfs_key key;
key.objectid = dir;
key.type = BTRFS_DIR_INDEX_KEY;
- key.offset = objectid;
+ key.offset = index;
- return btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod);
+ di = btrfs_lookup_match_dir(trans, root, path, &key, name, name_len, mod);
+ if (di == ERR_PTR(-ENOENT))
+ return NULL;
+
+ return di;
}
struct btrfs_dir_item *
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 10a0913ffb492..34e9eb5010cda 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -912,8 +912,7 @@ static noinline int inode_in_dir(struct btrfs_root *root,
di = btrfs_lookup_dir_index_item(NULL, root, path, dirid,
index, name, name_len, 0);
if (IS_ERR(di)) {
- if (PTR_ERR(di) != -ENOENT)
- ret = PTR_ERR(di);
+ ret = PTR_ERR(di);
goto out;
} else if (di) {
btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
@@ -1149,8 +1148,7 @@ static inline int __add_inode_ref(struct btrfs_trans_handle *trans,
di = btrfs_lookup_dir_index_item(trans, root, path, btrfs_ino(dir),
ref_index, name, namelen, 0);
if (IS_ERR(di)) {
- if (PTR_ERR(di) != -ENOENT)
- return PTR_ERR(di);
+ return PTR_ERR(di);
} else if (di) {
ret = drop_one_dir_item(trans, root, path, dir, di);
if (ret)
@@ -1976,9 +1974,6 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans,
goto out;
}
- if (dst_di == ERR_PTR(-ENOENT))
- dst_di = NULL;
-
if (IS_ERR(dst_di)) {
ret = PTR_ERR(dst_di);
goto out;
@@ -2286,7 +2281,7 @@ static noinline int check_item_in_log(struct btrfs_trans_handle *trans,
dir_key->offset,
name, name_len, 0);
}
- if (!log_di || log_di == ERR_PTR(-ENOENT)) {
+ if (!log_di) {
btrfs_dir_item_key_to_cpu(eb, di, &location);
btrfs_release_path(path);
btrfs_release_path(log_path);
@@ -3495,8 +3490,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans,
if (err == -ENOSPC) {
btrfs_set_log_full_commit(trans);
err = 0;
- } else if (err < 0 && err != -ENOENT) {
- /* ENOENT can be returned if the entry hasn't been fsynced yet */
+ } else if (err < 0) {
btrfs_abort_transaction(trans, err);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 064/122] btrfs: do not pin logs too early during renames
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 063/122] btrfs: unify lookup return value when dir entry is missing Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 065/122] lan743x: fix for potential NULL pointer dereference with bare card Greg Kroah-Hartman
` (63 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Filipe Manana, David Sterba,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
[ Upstream commit bd54f381a12ac695593271a663d36d14220215b2 ]
During renames we pin the logs of the roots a bit too early, before the
calls to btrfs_insert_inode_ref(). We can pin the logs after those calls,
since those will not change anything in a log tree.
In a scenario where we have multiple and diverse filesystem operations
running in parallel, those calls can take a significant amount of time,
due to lock contention on extent buffers, and delay log commits from other
tasks for longer than necessary.
So just pin logs after calls to btrfs_insert_inode_ref() and right before
the first operation that can update a log tree.
The following script that uses dbench was used for testing:
$ cat dbench-test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 16
umount $MNT
The tests were run on a machine with 12 cores, 64G of RAN, a NVMe device
and using a non-debug kernel config (Debian's default config).
The results compare a branch without this patch and without the previous
patch in the series, that has the subject:
"btrfs: eliminate some false positives when checking if inode was logged"
Versus the same branch with these two patches applied.
dbench with 8 clients, results before:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4391359 0.009 249.745
Close 3225882 0.001 3.243
Rename 185953 0.065 240.643
Unlink 886669 0.049 249.906
Deltree 112 2.455 217.433
Mkdir 56 0.002 0.004
Qpathinfo 3980281 0.004 3.109
Qfileinfo 697579 0.001 0.187
Qfsinfo 729780 0.002 2.424
Sfileinfo 357764 0.004 1.415
Find 1538861 0.016 4.863
WriteX 2189666 0.010 3.327
ReadX 6883443 0.002 0.729
LockX 14298 0.002 0.073
UnlockX 14298 0.001 0.042
Flush 307777 2.447 303.663
Throughput 1149.6 MB/sec 8 clients 8 procs max_latency=303.666 ms
dbench with 8 clients, results after:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4269920 0.009 213.532
Close 3136653 0.001 0.690
Rename 180805 0.082 213.858
Unlink 862189 0.050 172.893
Deltree 112 2.998 218.328
Mkdir 56 0.002 0.003
Qpathinfo 3870158 0.004 5.072
Qfileinfo 678375 0.001 0.194
Qfsinfo 709604 0.002 0.485
Sfileinfo 347850 0.004 1.304
Find 1496310 0.017 5.504
WriteX 2129613 0.010 2.882
ReadX 6693066 0.002 1.517
LockX 13902 0.002 0.075
UnlockX 13902 0.001 0.055
Flush 299276 2.511 220.189
Throughput 1187.33 MB/sec 8 clients 8 procs max_latency=220.194 ms
+3.2% throughput, -31.8% max latency
dbench with 16 clients, results before:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5978334 0.028 156.507
Close 4391598 0.001 1.345
Rename 253136 0.241 155.057
Unlink 1207220 0.182 257.344
Deltree 160 6.123 36.277
Mkdir 80 0.003 0.005
Qpathinfo 5418817 0.012 6.867
Qfileinfo 949929 0.001 0.941
Qfsinfo 993560 0.002 1.386
Sfileinfo 486904 0.004 2.829
Find 2095088 0.059 8.164
WriteX 2982319 0.017 9.029
ReadX 9371484 0.002 4.052
LockX 19470 0.002 0.461
UnlockX 19470 0.001 0.990
Flush 418936 2.740 347.902
Throughput 1495.31 MB/sec 16 clients 16 procs max_latency=347.909 ms
dbench with 16 clients, results after:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5711833 0.029 131.240
Close 4195897 0.001 1.732
Rename 241849 0.204 147.831
Unlink 1153341 0.184 231.322
Deltree 160 6.086 30.198
Mkdir 80 0.003 0.021
Qpathinfo 5177011 0.012 7.150
Qfileinfo 907768 0.001 0.793
Qfsinfo 949205 0.002 1.431
Sfileinfo 465317 0.004 2.454
Find 2001541 0.058 7.819
WriteX 2850661 0.017 9.110
ReadX 8952289 0.002 3.991
LockX 18596 0.002 0.655
UnlockX 18596 0.001 0.179
Flush 400342 2.879 293.607
Throughput 1565.73 MB/sec 16 clients 16 procs max_latency=293.611 ms
+4.6% throughput, -16.9% max latency
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/inode.c | 48 ++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 42 insertions(+), 6 deletions(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 250b6064876de..591caac2bf814 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -8968,8 +8968,6 @@ static int btrfs_rename_exchange(struct inode *old_dir,
/* force full log commit if subvolume involved. */
btrfs_set_log_full_commit(trans);
} else {
- btrfs_pin_log_trans(root);
- root_log_pinned = true;
ret = btrfs_insert_inode_ref(trans, dest,
new_dentry->d_name.name,
new_dentry->d_name.len,
@@ -8986,8 +8984,6 @@ static int btrfs_rename_exchange(struct inode *old_dir,
/* force full log commit if subvolume involved. */
btrfs_set_log_full_commit(trans);
} else {
- btrfs_pin_log_trans(dest);
- dest_log_pinned = true;
ret = btrfs_insert_inode_ref(trans, root,
old_dentry->d_name.name,
old_dentry->d_name.len,
@@ -9018,6 +9014,29 @@ static int btrfs_rename_exchange(struct inode *old_dir,
BTRFS_I(new_inode), 1);
}
+ /*
+ * Now pin the logs of the roots. We do it to ensure that no other task
+ * can sync the logs while we are in progress with the rename, because
+ * that could result in an inconsistency in case any of the inodes that
+ * are part of this rename operation were logged before.
+ *
+ * We pin the logs even if at this precise moment none of the inodes was
+ * logged before. This is because right after we checked for that, some
+ * other task fsyncing some other inode not involved with this rename
+ * operation could log that one of our inodes exists.
+ *
+ * We don't need to pin the logs before the above calls to
+ * btrfs_insert_inode_ref(), since those don't ever need to change a log.
+ */
+ if (old_ino != BTRFS_FIRST_FREE_OBJECTID) {
+ btrfs_pin_log_trans(root);
+ root_log_pinned = true;
+ }
+ if (new_ino != BTRFS_FIRST_FREE_OBJECTID) {
+ btrfs_pin_log_trans(dest);
+ dest_log_pinned = true;
+ }
+
/* src is a subvolume */
if (old_ino == BTRFS_FIRST_FREE_OBJECTID) {
ret = btrfs_unlink_subvol(trans, old_dir, old_dentry);
@@ -9267,8 +9286,6 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
/* force full log commit if subvolume involved. */
btrfs_set_log_full_commit(trans);
} else {
- btrfs_pin_log_trans(root);
- log_pinned = true;
ret = btrfs_insert_inode_ref(trans, dest,
new_dentry->d_name.name,
new_dentry->d_name.len,
@@ -9292,6 +9309,25 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
if (unlikely(old_ino == BTRFS_FIRST_FREE_OBJECTID)) {
ret = btrfs_unlink_subvol(trans, old_dir, old_dentry);
} else {
+ /*
+ * Now pin the log. We do it to ensure that no other task can
+ * sync the log while we are in progress with the rename, as
+ * that could result in an inconsistency in case any of the
+ * inodes that are part of this rename operation were logged
+ * before.
+ *
+ * We pin the log even if at this precise moment none of the
+ * inodes was logged before. This is because right after we
+ * checked for that, some other task fsyncing some other inode
+ * not involved with this rename operation could log that one of
+ * our inodes exists.
+ *
+ * We don't need to pin the logs before the above call to
+ * btrfs_insert_inode_ref(), since that does not need to change
+ * a log.
+ */
+ btrfs_pin_log_trans(root);
+ log_pinned = true;
ret = __btrfs_unlink_inode(trans, root, BTRFS_I(old_dir),
BTRFS_I(d_inode(old_dentry)),
old_dentry->d_name.name,
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 065/122] lan743x: fix for potential NULL pointer dereference with bare card
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 064/122] btrfs: do not pin logs too early during renames Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 066/122] platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC Greg Kroah-Hartman
` (62 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sergej Bauer, Jakub Kicinski,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergej Bauer <sbauer@blackbox.su>
[ Upstream commit e9e13b6adc338be1eb88db87bcb392696144bd02 ]
This is the 3rd revision of the patch fix for potential null pointer dereference
with lan743x card.
The simpliest way to reproduce: boot with bare lan743x and issue "ethtool ethN"
commant where ethN is the interface with lan743x card. Example:
$ sudo ethtool eth7
dmesg:
[ 103.510336] BUG: kernel NULL pointer dereference, address: 0000000000000340
...
[ 103.510836] RIP: 0010:phy_ethtool_get_wol+0x5/0x30 [libphy]
...
[ 103.511629] Call Trace:
[ 103.511666] lan743x_ethtool_get_wol+0x21/0x40 [lan743x]
[ 103.511724] dev_ethtool+0x1507/0x29d0
[ 103.511769] ? avc_has_extended_perms+0x17f/0x440
[ 103.511820] ? tomoyo_init_request_info+0x84/0x90
[ 103.511870] ? tomoyo_path_number_perm+0x68/0x1e0
[ 103.511919] ? tty_insert_flip_string_fixed_flag+0x82/0xe0
[ 103.511973] ? inet_ioctl+0x187/0x1d0
[ 103.512016] dev_ioctl+0xb5/0x560
[ 103.512055] sock_do_ioctl+0xa0/0x140
[ 103.512098] sock_ioctl+0x2cb/0x3c0
[ 103.512139] __x64_sys_ioctl+0x84/0xc0
[ 103.512183] do_syscall_64+0x33/0x80
[ 103.512224] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 103.512274] RIP: 0033:0x7f54a9cba427
...
Previous versions can be found at:
v1:
initial version
https://lkml.org/lkml/2020/10/28/921
v2:
do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip
the call of phy_ethtool_set_wol() instead.
https://lkml.org/lkml/2020/10/31/380
v3:
in function lan743x_ethtool_set_wol:
use ternary operator instead of if-else sentence (review by Markus Elfring)
return -ENETDOWN insted of -EIO (review by Andrew Lunn)
Signed-off-by: Sergej Bauer <sbauer@blackbox.su>
Link: https://lore.kernel.org/r/20201101223556.16116-1-sbauer@blackbox.su
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/microchip/lan743x_ethtool.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index dcde496da7fb4..c5de8f46cdd35 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -780,7 +780,9 @@ static void lan743x_ethtool_get_wol(struct net_device *netdev,
wol->supported = 0;
wol->wolopts = 0;
- phy_ethtool_get_wol(netdev->phydev, wol);
+
+ if (netdev->phydev)
+ phy_ethtool_get_wol(netdev->phydev, wol);
wol->supported |= WAKE_BCAST | WAKE_UCAST | WAKE_MCAST |
WAKE_MAGIC | WAKE_PHY | WAKE_ARP;
@@ -809,9 +811,8 @@ static int lan743x_ethtool_set_wol(struct net_device *netdev,
device_set_wakeup_enable(&adapter->pdev->dev, (bool)wol->wolopts);
- phy_ethtool_set_wol(netdev->phydev, wol);
-
- return 0;
+ return netdev->phydev ? phy_ethtool_set_wol(netdev->phydev, wol)
+ : -ENETDOWN;
}
#endif /* CONFIG_PM */
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 066/122] platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 065/122] lan743x: fix for potential NULL pointer dereference with bare card Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 067/122] iwlwifi: mvm: do more useful queue sync accounting Greg Kroah-Hartman
` (61 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Max Verevkin, Hans de Goede,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Verevkin <me@maxverevkin.tk>
[ Upstream commit 07b211992d6c0d80b321403244d43bbd2d6cf48c ]
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Signed-off-by: Max Verevkin <me@maxverevkin.tk>
Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/intel-vbtn.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index a90c32d072da3..9c8a6722f115e 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -230,6 +230,12 @@ static const struct dmi_system_id dmi_switches_allow_list[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7352"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"),
+ },
+ },
{} /* Array terminator */
};
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 067/122] iwlwifi: mvm: do more useful queue sync accounting
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 066/122] platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 068/122] iwlwifi: mvm: write queue_sync_state only for sync Greg Kroah-Hartman
` (60 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Johannes Berg, Luca Coelho,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <johannes.berg@intel.com>
[ Upstream commit 2f7a04c7b03b7fd63b7618e29295fc25732faac1 ]
We're currently doing accounting on the queue sync with an
atomic variable that counts down the number of remaining
notifications that we still need.
As we've been hitting issues in this area, modify this to
track a bitmap of queues, not just the number of queues,
and print out the remaining bitmap in the warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.0a3fa177cd6b.I7c69ff999419368266279ec27dd618eb450908b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Stable-dep-of: 5f8a3561ea8b ("iwlwifi: mvm: write queue_sync_state only for sync")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 11 ++++++-----
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 10 +++++++---
4 files changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index d2c6fdb702732..f2096729ac5ac 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -5155,8 +5155,7 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm,
if (notif->sync) {
notif->cookie = mvm->queue_sync_cookie;
- atomic_set(&mvm->queue_sync_counter,
- mvm->trans->num_rx_queues);
+ mvm->queue_sync_state = (1 << mvm->trans->num_rx_queues) - 1;
}
ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)notif,
@@ -5169,14 +5168,16 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm,
if (notif->sync) {
lockdep_assert_held(&mvm->mutex);
ret = wait_event_timeout(mvm->rx_sync_waitq,
- atomic_read(&mvm->queue_sync_counter) == 0 ||
+ READ_ONCE(mvm->queue_sync_state) == 0 ||
iwl_mvm_is_radio_killed(mvm),
HZ);
- WARN_ON_ONCE(!ret && !iwl_mvm_is_radio_killed(mvm));
+ WARN_ONCE(!ret && !iwl_mvm_is_radio_killed(mvm),
+ "queue sync: failed to sync, state is 0x%lx\n",
+ mvm->queue_sync_state);
}
out:
- atomic_set(&mvm->queue_sync_counter, 0);
+ mvm->queue_sync_state = 0;
if (notif->sync)
mvm->queue_sync_cookie++;
}
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
index 64f5a4cb3d3ac..8b779c3a92d43 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
@@ -842,7 +842,7 @@ struct iwl_mvm {
unsigned long status;
u32 queue_sync_cookie;
- atomic_t queue_sync_counter;
+ unsigned long queue_sync_state;
/*
* for beacon filtering -
* currently only one interface can be supported
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index 5b173f21e87bf..3548eb57f1f30 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -725,7 +725,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
init_waitqueue_head(&mvm->rx_sync_waitq);
- atomic_set(&mvm->queue_sync_counter, 0);
+ mvm->queue_sync_state = 0;
SET_IEEE80211_DEV(mvm->hw, mvm->trans->dev);
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 86b3fb321dfdd..e2a39e8b98d07 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -853,9 +853,13 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct napi_struct *napi,
WARN_ONCE(1, "Invalid identifier %d", internal_notif->type);
}
- if (internal_notif->sync &&
- !atomic_dec_return(&mvm->queue_sync_counter))
- wake_up(&mvm->rx_sync_waitq);
+ if (internal_notif->sync) {
+ WARN_ONCE(!test_and_clear_bit(queue, &mvm->queue_sync_state),
+ "queue sync: queue %d responded a second time!\n",
+ queue);
+ if (READ_ONCE(mvm->queue_sync_state) == 0)
+ wake_up(&mvm->rx_sync_waitq);
+ }
}
static void iwl_mvm_oldsn_workaround(struct iwl_mvm *mvm,
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 068/122] iwlwifi: mvm: write queue_sync_state only for sync
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 067/122] iwlwifi: mvm: do more useful queue sync accounting Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 069/122] jbd2: remove redundant buffer io error checks Greg Kroah-Hartman
` (59 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Johannes Berg, Luca Coelho,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <johannes.berg@intel.com>
[ Upstream commit 5f8a3561ea8bf75ad52cb16dafe69dd550fa542e ]
We use mvm->queue_sync_state to wait for synchronous queue sync
messages, but if an async one happens inbetween we shouldn't
clear mvm->queue_sync_state after sending the async one, that
can run concurrently (at least from the CPU POV) with another
synchronous queue sync.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d11c9bcdb4aa.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index f2096729ac5ac..08008b0c0637c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -5177,9 +5177,10 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm,
}
out:
- mvm->queue_sync_state = 0;
- if (notif->sync)
+ if (notif->sync) {
+ mvm->queue_sync_state = 0;
mvm->queue_sync_cookie++;
+ }
}
static void iwl_mvm_sync_rx_queues(struct ieee80211_hw *hw)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 069/122] jbd2: remove redundant buffer io error checks
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 068/122] iwlwifi: mvm: write queue_sync_state only for sync Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 070/122] jbd2: recheck chechpointing non-dirty buffer Greg Kroah-Hartman
` (58 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhang Yi, Jan Kara, Theodore Tso,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Yi <yi.zhang@huawei.com>
[ Upstream commit 214eb5a4d8a2032fb9f0711d1b202eb88ee02920 ]
Now that __jbd2_journal_remove_checkpoint() can detect buffer io error
and mark journal checkpoint error, then we abort the journal later
before updating log tail to ensure the filesystem works consistently.
So we could remove other redundant buffer io error checkes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: e34c8dd238d0 ("jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/checkpoint.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 472932b9e6bca..ea08adcea84c3 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -91,8 +91,7 @@ static int __try_to_free_cp_buf(struct journal_head *jh)
int ret = 0;
struct buffer_head *bh = jh2bh(jh);
- if (jh->b_transaction == NULL && !buffer_locked(bh) &&
- !buffer_dirty(bh) && !buffer_write_io_error(bh)) {
+ if (!jh->b_transaction && !buffer_locked(bh) && !buffer_dirty(bh)) {
JBUFFER_TRACE(jh, "remove from checkpoint list");
ret = __jbd2_journal_remove_checkpoint(jh) + 1;
}
@@ -228,7 +227,6 @@ int jbd2_log_do_checkpoint(journal_t *journal)
* OK, we need to start writing disk blocks. Take one transaction
* and write it.
*/
- result = 0;
spin_lock(&journal->j_list_lock);
if (!journal->j_checkpoint_transactions)
goto out;
@@ -295,8 +293,6 @@ int jbd2_log_do_checkpoint(journal_t *journal)
goto restart;
}
if (!buffer_dirty(bh)) {
- if (unlikely(buffer_write_io_error(bh)) && !result)
- result = -EIO;
BUFFER_TRACE(bh, "remove from checkpoint");
if (__jbd2_journal_remove_checkpoint(jh))
/* The transaction was released; we're done */
@@ -356,8 +352,6 @@ int jbd2_log_do_checkpoint(journal_t *journal)
spin_lock(&journal->j_list_lock);
goto restart2;
}
- if (unlikely(buffer_write_io_error(bh)) && !result)
- result = -EIO;
/*
* Now in whatever state the buffer currently is, we
@@ -369,10 +363,7 @@ int jbd2_log_do_checkpoint(journal_t *journal)
}
out:
spin_unlock(&journal->j_list_lock);
- if (result < 0)
- jbd2_journal_abort(journal, result);
- else
- result = jbd2_cleanup_journal_tail(journal);
+ result = jbd2_cleanup_journal_tail(journal);
return (result < 0) ? result : 0;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 070/122] jbd2: recheck chechpointing non-dirty buffer
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 069/122] jbd2: remove redundant buffer io error checks Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 071/122] jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint Greg Kroah-Hartman
` (57 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jan Kara, Zhang Yi, Zhihao Cheng,
Theodore Tso, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Yi <yi.zhang@huawei.com>
[ Upstream commit c2d6fd9d6f35079f1669f0100f05b46708c74b7f ]
There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.
jbd2_log_do_checkpoint() //transaction X
//buffer A is dirty and not belones to any transaction
__buffer_relink_io() //move it to the IO list
__flush_batch()
write_dirty_buffer()
do_get_write_access()
clear_buffer_dirty
__jbd2_journal_file_buffer()
//add buffer A to a new transaction Y
lock_buffer(bh)
//doesn't write out
__jbd2_journal_remove_checkpoint()
//finish checkpoint except buffer A
//filesystem corrupt if the new transaction Y isn't fully write out.
Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.
Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: e34c8dd238d0 ("jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/checkpoint.c | 102 ++++++++++++-------------------------------
1 file changed, 29 insertions(+), 73 deletions(-)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index ea08adcea84c3..aac17c59b7ece 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -57,28 +57,6 @@ static inline void __buffer_unlink(struct journal_head *jh)
}
}
-/*
- * Move a buffer from the checkpoint list to the checkpoint io list
- *
- * Called with j_list_lock held
- */
-static inline void __buffer_relink_io(struct journal_head *jh)
-{
- transaction_t *transaction = jh->b_cp_transaction;
-
- __buffer_unlink_first(jh);
-
- if (!transaction->t_checkpoint_io_list) {
- jh->b_cpnext = jh->b_cpprev = jh;
- } else {
- jh->b_cpnext = transaction->t_checkpoint_io_list;
- jh->b_cpprev = transaction->t_checkpoint_io_list->b_cpprev;
- jh->b_cpprev->b_cpnext = jh;
- jh->b_cpnext->b_cpprev = jh;
- }
- transaction->t_checkpoint_io_list = jh;
-}
-
/*
* Try to release a checkpointed buffer from its transaction.
* Returns 1 if we released it and 2 if we also released the
@@ -190,6 +168,7 @@ __flush_batch(journal_t *journal, int *batch_count)
struct buffer_head *bh = journal->j_chkpt_bhs[i];
BUFFER_TRACE(bh, "brelse");
__brelse(bh);
+ journal->j_chkpt_bhs[i] = NULL;
}
*batch_count = 0;
}
@@ -249,6 +228,11 @@ int jbd2_log_do_checkpoint(journal_t *journal)
jh = transaction->t_checkpoint_list;
bh = jh2bh(jh);
+ /*
+ * The buffer may be writing back, or flushing out in the
+ * last couple of cycles, or re-adding into a new transaction,
+ * need to check it again until it's unlocked.
+ */
if (buffer_locked(bh)) {
get_bh(bh);
spin_unlock(&journal->j_list_lock);
@@ -294,28 +278,32 @@ int jbd2_log_do_checkpoint(journal_t *journal)
}
if (!buffer_dirty(bh)) {
BUFFER_TRACE(bh, "remove from checkpoint");
- if (__jbd2_journal_remove_checkpoint(jh))
- /* The transaction was released; we're done */
+ /*
+ * If the transaction was released or the checkpoint
+ * list was empty, we're done.
+ */
+ if (__jbd2_journal_remove_checkpoint(jh) ||
+ !transaction->t_checkpoint_list)
goto out;
- continue;
+ } else {
+ /*
+ * We are about to write the buffer, it could be
+ * raced by some other transaction shrink or buffer
+ * re-log logic once we release the j_list_lock,
+ * leave it on the checkpoint list and check status
+ * again to make sure it's clean.
+ */
+ BUFFER_TRACE(bh, "queue");
+ get_bh(bh);
+ J_ASSERT_BH(bh, !buffer_jwrite(bh));
+ journal->j_chkpt_bhs[batch_count++] = bh;
+ transaction->t_chp_stats.cs_written++;
+ transaction->t_checkpoint_list = jh->b_cpnext;
}
- /*
- * Important: we are about to write the buffer, and
- * possibly block, while still holding the journal
- * lock. We cannot afford to let the transaction
- * logic start messing around with this buffer before
- * we write it to disk, as that would break
- * recoverability.
- */
- BUFFER_TRACE(bh, "queue");
- get_bh(bh);
- J_ASSERT_BH(bh, !buffer_jwrite(bh));
- journal->j_chkpt_bhs[batch_count++] = bh;
- __buffer_relink_io(jh);
- transaction->t_chp_stats.cs_written++;
+
if ((batch_count == JBD2_NR_BATCH) ||
- need_resched() ||
- spin_needbreak(&journal->j_list_lock))
+ need_resched() || spin_needbreak(&journal->j_list_lock) ||
+ jh2bh(transaction->t_checkpoint_list) == journal->j_chkpt_bhs[0])
goto unlock_and_flush;
}
@@ -329,38 +317,6 @@ int jbd2_log_do_checkpoint(journal_t *journal)
goto restart;
}
- /*
- * Now we issued all of the transaction's buffers, let's deal
- * with the buffers that are out for I/O.
- */
-restart2:
- /* Did somebody clean up the transaction in the meanwhile? */
- if (journal->j_checkpoint_transactions != transaction ||
- transaction->t_tid != this_tid)
- goto out;
-
- while (transaction->t_checkpoint_io_list) {
- jh = transaction->t_checkpoint_io_list;
- bh = jh2bh(jh);
- if (buffer_locked(bh)) {
- get_bh(bh);
- spin_unlock(&journal->j_list_lock);
- wait_on_buffer(bh);
- /* the journal_head may have gone by now */
- BUFFER_TRACE(bh, "brelse");
- __brelse(bh);
- spin_lock(&journal->j_list_lock);
- goto restart2;
- }
-
- /*
- * Now in whatever state the buffer currently is, we
- * know that it has been written out and so we can
- * drop it from the list
- */
- if (__jbd2_journal_remove_checkpoint(jh))
- break;
- }
out:
spin_unlock(&journal->j_list_lock);
result = jbd2_cleanup_journal_tail(journal);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 071/122] jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 070/122] jbd2: recheck chechpointing non-dirty buffer Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 072/122] x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm() Greg Kroah-Hartman
` (56 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhihao Cheng, Zhang Yi, Jan Kara,
Theodore Tso, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhihao Cheng <chengzhihao1@huawei.com>
[ Upstream commit e34c8dd238d0c9368b746480f313055f5bab5040 ]
Following process,
jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
P1 wb_workfn
jbd2_log_do_checkpoint
if (buffer_locked(bh)) // false
__block_write_full_page
trylock_buffer(bh)
test_clear_buffer_dirty(bh)
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
if (buffer_write_io_error(bh)) // false
>> bh IO error occurs <<
jbd2_cleanup_journal_tail
__jbd2_update_log_tail
jbd2_write_superblock
// The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].
Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Fixes: 470decc613ab ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/jbd2/checkpoint.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index aac17c59b7ece..7898983c9fba0 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -228,20 +228,6 @@ int jbd2_log_do_checkpoint(journal_t *journal)
jh = transaction->t_checkpoint_list;
bh = jh2bh(jh);
- /*
- * The buffer may be writing back, or flushing out in the
- * last couple of cycles, or re-adding into a new transaction,
- * need to check it again until it's unlocked.
- */
- if (buffer_locked(bh)) {
- get_bh(bh);
- spin_unlock(&journal->j_list_lock);
- wait_on_buffer(bh);
- /* the journal_head may have gone by now */
- BUFFER_TRACE(bh, "brelse");
- __brelse(bh);
- goto retry;
- }
if (jh->b_transaction != NULL) {
transaction_t *t = jh->b_transaction;
tid_t tid = t->t_tid;
@@ -276,7 +262,22 @@ int jbd2_log_do_checkpoint(journal_t *journal)
spin_lock(&journal->j_list_lock);
goto restart;
}
- if (!buffer_dirty(bh)) {
+ if (!trylock_buffer(bh)) {
+ /*
+ * The buffer is locked, it may be writing back, or
+ * flushing out in the last couple of cycles, or
+ * re-adding into a new transaction, need to check
+ * it again until it's unlocked.
+ */
+ get_bh(bh);
+ spin_unlock(&journal->j_list_lock);
+ wait_on_buffer(bh);
+ /* the journal_head may have gone by now */
+ BUFFER_TRACE(bh, "brelse");
+ __brelse(bh);
+ goto retry;
+ } else if (!buffer_dirty(bh)) {
+ unlock_buffer(bh);
BUFFER_TRACE(bh, "remove from checkpoint");
/*
* If the transaction was released or the checkpoint
@@ -286,6 +287,7 @@ int jbd2_log_do_checkpoint(journal_t *journal)
!transaction->t_checkpoint_list)
goto out;
} else {
+ unlock_buffer(bh);
/*
* We are about to write the buffer, it could be
* raced by some other transaction shrink or buffer
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 072/122] x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 071/122] jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 073/122] erofs: fix lz4 inplace decompression Greg Kroah-Hartman
` (55 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Beulich, Paolo Bonzini
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Beulich <jbeulich@suse.com>
commit 1df931d95f4dc1c11db1123e85d4e08156e46ef9 upstream.
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215a2 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/uaccess.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -471,7 +471,7 @@ do { \
[ptr] "+m" (*_ptr), \
[old] "+a" (__old) \
: [new] ltype (__new) \
- : "memory", "cc"); \
+ : "memory"); \
if (unlikely(__err)) \
goto label; \
if (unlikely(!success)) \
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 073/122] erofs: fix lz4 inplace decompression
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 072/122] x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 074/122] IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Greg Kroah-Hartman
` (54 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Yifan Zhao, Gao Xiang, Juhyung Park
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <hsiangkao@linux.alibaba.com>
commit 3c12466b6b7bf1e56f9b32c366a3d83d87afb4de upstream.
Currently EROFS can map another compressed buffer for inplace
decompression, that was used to handle the cases that some pages of
compressed data are actually not in-place I/O.
However, like most simple LZ77 algorithms, LZ4 expects the compressed
data is arranged at the end of the decompressed buffer and it
explicitly uses memmove() to handle overlapping:
__________________________________________________________
|_ direction of decompression --> ____ |_ compressed data _|
Although EROFS arranges compressed data like this, it typically maps two
individual virtual buffers so the relative order is uncertain.
Previously, it was hardly observed since LZ4 only uses memmove() for
short overlapped literals and x86/arm64 memmove implementations seem to
completely cover it up and they don't have this issue. Juhyung reported
that EROFS data corruption can be found on a new Intel x86 processor.
After some analysis, it seems that recent x86 processors with the new
FSRM feature expose this issue with "rep movsb".
Let's strictly use the decompressed buffer for lz4 inplace
decompression for now. Later, as an useful improvement, we could try
to tie up these two buffers together in the correct order.
Reported-and-tested-by: Juhyung Park <qkrwngud825@gmail.com>
Closes: https://lore.kernel.org/r/CAD14+f2AVKf8Fa2OO1aAUdDNTDsVzzR6ctU_oJSmTyd6zSYR2Q@mail.gmail.com
Fixes: 0ffd71bcc3a0 ("staging: erofs: introduce LZ4 decompression inplace")
Fixes: 598162d05080 ("erofs: support decompress big pcluster for lz4 backend")
Cc: stable <stable@vger.kernel.org> # 5.4+
Tested-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231206045534.3920847-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/erofs/decompressor.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- a/fs/erofs/decompressor.c
+++ b/fs/erofs/decompressor.c
@@ -24,7 +24,8 @@ struct z_erofs_decompressor {
*/
int (*prepare_destpages)(struct z_erofs_decompress_req *rq,
struct list_head *pagepool);
- int (*decompress)(struct z_erofs_decompress_req *rq, u8 *out);
+ int (*decompress)(struct z_erofs_decompress_req *rq, u8 *out,
+ u8 *obase);
char *name;
};
@@ -114,10 +115,13 @@ static void *generic_copy_inplace_data(s
return tmp;
}
-static int z_erofs_lz4_decompress(struct z_erofs_decompress_req *rq, u8 *out)
+static int z_erofs_lz4_decompress(struct z_erofs_decompress_req *rq, u8 *out,
+ u8 *obase)
{
+ const uint nrpages_out = PAGE_ALIGN(rq->pageofs_out +
+ rq->outputsize) >> PAGE_SHIFT;
unsigned int inputmargin, inlen;
- u8 *src;
+ u8 *src, *src2;
bool copied, support_0padding;
int ret;
@@ -125,6 +129,7 @@ static int z_erofs_lz4_decompress(struct
return -EOPNOTSUPP;
src = kmap_atomic(*rq->in);
+ src2 = src;
inputmargin = 0;
support_0padding = false;
@@ -148,16 +153,15 @@ static int z_erofs_lz4_decompress(struct
if (rq->inplace_io) {
const uint oend = (rq->pageofs_out +
rq->outputsize) & ~PAGE_MASK;
- const uint nr = PAGE_ALIGN(rq->pageofs_out +
- rq->outputsize) >> PAGE_SHIFT;
-
if (rq->partial_decoding || !support_0padding ||
- rq->out[nr - 1] != rq->in[0] ||
+ rq->out[nrpages_out - 1] != rq->in[0] ||
rq->inputsize - oend <
LZ4_DECOMPRESS_INPLACE_MARGIN(inlen)) {
src = generic_copy_inplace_data(rq, src, inputmargin);
inputmargin = 0;
copied = true;
+ } else {
+ src = obase + ((nrpages_out - 1) << PAGE_SHIFT);
}
}
@@ -187,7 +191,7 @@ static int z_erofs_lz4_decompress(struct
if (copied)
erofs_put_pcpubuf(src);
else
- kunmap_atomic(src);
+ kunmap_atomic(src2);
return ret;
}
@@ -257,7 +261,7 @@ static int z_erofs_decompress_generic(st
return PTR_ERR(dst);
rq->inplace_io = false;
- ret = alg->decompress(rq, dst);
+ ret = alg->decompress(rq, dst, NULL);
if (!ret)
copy_from_pcpubuf(rq->out, dst, rq->pageofs_out,
rq->outputsize);
@@ -291,7 +295,7 @@ static int z_erofs_decompress_generic(st
dst_maptype = 2;
dstmap_out:
- ret = alg->decompress(rq, dst + rq->pageofs_out);
+ ret = alg->decompress(rq, dst + rq->pageofs_out, dst);
if (!dst_maptype)
kunmap_atomic(dst);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 074/122] IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 073/122] erofs: fix lz4 inplace decompression Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 075/122] s390/cio: fix invalid -EBUSY on ccw_device_start Greg Kroah-Hartman
` (53 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mats Kronberg, Daniel Vacek,
Leon Romanovsky
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vacek <neelx@redhat.com>
commit e6f57c6881916df39db7d95981a8ad2b9c3458d6 upstream.
Unfortunately the commit `fd8958efe877` introduced another error
causing the `descs` array to overflow. This reults in further crashes
easily reproducible by `sendmsg` system call.
[ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI
[ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1]
--
[ 1080.974535] Call Trace:
[ 1080.976990] <TASK>
[ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1]
[ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1]
[ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1]
[ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib]
[ 1081.046978] dev_hard_start_xmit+0xc4/0x210
--
[ 1081.148347] __sys_sendmsg+0x59/0xa0
crash> ipoib_txreq 0xffff9cfeba229f00
struct ipoib_txreq {
txreq = {
list = {
next = 0xffff9cfeba229f00,
prev = 0xffff9cfeba229f00
},
descp = 0xffff9cfeba229f40,
coalesce_buf = 0x0,
wait = 0xffff9cfea4e69a48,
complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>,
packet_len = 0x46d,
tlen = 0x0,
num_desc = 0x0,
desc_limit = 0x6,
next_descq_idx = 0x45c,
coalesce_idx = 0x0,
flags = 0x0,
descs = {{
qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63)
}, {
qw = { 0x3800014231b108, 0x4}
}, {
qw = { 0x310000e4ee0fcf0, 0x8}
}, {
qw = { 0x3000012e9f8000, 0x8}
}, {
qw = { 0x59000dfb9d0000, 0x8}
}, {
qw = { 0x78000e02e40000, 0x8}
}}
},
sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure
sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62)
complete = 0x0,
priv = 0x0,
txq = 0xffff9cfea4e69880,
skb = 0xffff9d099809f400
}
If an SDMA send consists of exactly 6 descriptors and requires dword
padding (in the 7th descriptor), the sdma_txreq descriptor array is not
properly expanded and the packet will overflow into the container
structure. This results in a panic when the send completion runs. The
exact panic varies depending on what elements of the container structure
get corrupted. The fix is to use the correct expression in
_pad_sdma_tx_descs() to test the need to expand the descriptor array.
With this patch the crashes are no longer reproducible and the machine is
stable.
Fixes: fd8958efe877 ("IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors")
Cc: stable@vger.kernel.org
Reported-by: Mats Kronberg <kronberg@nsc.liu.se>
Tested-by: Mats Kronberg <kronberg@nsc.liu.se>
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Link: https://lore.kernel.org/r/20240201081009.1109442-1-neelx@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/hw/hfi1/sdma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hfi1/sdma.c
+++ b/drivers/infiniband/hw/hfi1/sdma.c
@@ -3200,7 +3200,7 @@ int _pad_sdma_tx_descs(struct hfi1_devda
{
int rval = 0;
- if ((unlikely(tx->num_desc + 1 == tx->desc_limit))) {
+ if ((unlikely(tx->num_desc == tx->desc_limit))) {
rval = _extend_sdma_tx_descs(dd, tx);
if (rval) {
__sdma_txclean(dd, tx);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 075/122] s390/cio: fix invalid -EBUSY on ccw_device_start
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 074/122] IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 076/122] dm-crypt: dont modify the data when using authenticated encryption Greg Kroah-Hartman
` (52 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Thorsten Winkler,
Peter Oberparleiter, Heiko Carstens
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Oberparleiter <oberpar@linux.ibm.com>
commit 5ef1dc40ffa6a6cb968b0fdc43c3a61727a9e950 upstream.
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/s390/cio/device_ops.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index c533d1dadc6b..a5dba3829769 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -202,7 +202,8 @@ int ccw_device_start_timeout_key(struct ccw_device *cdev, struct ccw1 *cpa,
return -EINVAL;
if (cdev->private->state == DEV_STATE_NOT_OPER)
return -ENODEV;
- if (cdev->private->state == DEV_STATE_VERIFY) {
+ if (cdev->private->state == DEV_STATE_VERIFY ||
+ cdev->private->flags.doverify) {
/* Remember to fake irb when finished. */
if (!cdev->private->flags.fake_irb) {
cdev->private->flags.fake_irb = FAKE_CMD_IRB;
@@ -214,8 +215,7 @@ int ccw_device_start_timeout_key(struct ccw_device *cdev, struct ccw1 *cpa,
}
if (cdev->private->state != DEV_STATE_ONLINE ||
((sch->schib.scsw.cmd.stctl & SCSW_STCTL_PRIM_STATUS) &&
- !(sch->schib.scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS)) ||
- cdev->private->flags.doverify)
+ !(sch->schib.scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS)))
return -EBUSY;
ret = cio_set_options (sch, flags);
if (ret)
--
2.44.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 076/122] dm-crypt: dont modify the data when using authenticated encryption
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 075/122] s390/cio: fix invalid -EBUSY on ccw_device_start Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 077/122] KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler Greg Kroah-Hartman
` (51 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mikulas Patocka, Mike Snitzer
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <mpatocka@redhat.com>
commit 50c70240097ce41fe6bce6478b80478281e4d0f7 upstream.
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
[1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-crypt.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -2064,6 +2064,12 @@ static void kcryptd_crypt_write_convert(
io->ctx.bio_out = clone;
io->ctx.iter_out = clone->bi_iter;
+ if (crypt_integrity_aead(cc)) {
+ bio_copy_data(clone, io->base_bio);
+ io->ctx.bio_in = clone;
+ io->ctx.iter_in = clone->bi_iter;
+ }
+
sector += bio_sectors(clone);
crypt_inc_pending(io);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 077/122] KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 076/122] dm-crypt: dont modify the data when using authenticated encryption Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 078/122] KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table() Greg Kroah-Hartman
` (50 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Oliver Upton, Marc Zyngier
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Upton <oliver.upton@linux.dev>
commit 85a71ee9a0700f6c18862ef3b0011ed9dad99aca upstream.
It is possible that an LPI mapped in a different ITS gets unmapped while
handling the MOVALL command. If that is the case, there is no state that
can be migrated to the destination. Silently ignore it and continue
migrating other LPIs.
Cc: stable@vger.kernel.org
Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/vgic/vgic-its.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -1374,6 +1374,8 @@ static int vgic_its_cmd_handle_movall(st
for (i = 0; i < irq_count; i++) {
irq = vgic_get_irq(kvm, NULL, intids[i]);
+ if (!irq)
+ continue;
update_affinity(irq, vcpu2);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 078/122] KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 077/122] KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 079/122] gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() Greg Kroah-Hartman
` (49 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Oliver Upton, Marc Zyngier
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Upton <oliver.upton@linux.dev>
commit 8d3a7dfb801d157ac423261d7cd62c33e95375f8 upstream.
vgic_get_irq() may not return a valid descriptor if there is no ITS that
holds a valid translation for the specified INTID. If that is the case,
it is safe to silently ignore it and continue processing the LPI pending
table.
Cc: stable@vger.kernel.org
Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/vgic/vgic-its.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -462,6 +462,9 @@ static int its_sync_lpi_pending_table(st
}
irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]);
+ if (!irq)
+ continue;
+
raw_spin_lock_irqsave(&irq->irq_lock, flags);
irq->pending_latch = pendmask & (1U << bit_nr);
vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 079/122] gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 078/122] KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 080/122] PCI/MSI: Prevent MSI hardware interrupt number truncation Greg Kroah-Hartman
` (48 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Vasiliy Kovalev, Jakub Kicinski
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev <kovalev@altlinux.org>
commit 136cfaca22567a03bbb3bf53a43d8cb5748b80ec upstream.
The gtp_net_ops pernet operations structure for the subsystem must be
registered before registering the generic netlink family.
Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp]
Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86
df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80>
3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74
RSP: 0018:ffff888014107220 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000
FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? show_regs+0x90/0xa0
? die_addr+0x50/0xd0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? gtp_genl_dump_pdp+0x1be/0x800 [gtp]
? __alloc_skb+0x1dd/0x350
? __pfx___alloc_skb+0x10/0x10
genl_dumpit+0x11d/0x230
netlink_dump+0x5b9/0xce0
? lockdep_hardirqs_on_prepare+0x253/0x430
? __pfx_netlink_dump+0x10/0x10
? kasan_save_track+0x10/0x40
? __kasan_kmalloc+0x9b/0xa0
? genl_start+0x675/0x970
__netlink_dump_start+0x6fc/0x9f0
genl_family_rcv_msg_dumpit+0x1bb/0x2d0
? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10
? genl_op_from_small+0x2a/0x440
? cap_capable+0x1d0/0x240
? __pfx_genl_start+0x10/0x10
? __pfx_genl_dumpit+0x10/0x10
? __pfx_genl_done+0x10/0x10
? security_capable+0x9d/0xe0
Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Link: https://lore.kernel.org/r/20240214162733.34214-1-kovalev@altlinux.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/gtp.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1410,20 +1410,20 @@ static int __init gtp_init(void)
if (err < 0)
goto error_out;
- err = genl_register_family(>p_genl_family);
+ err = register_pernet_subsys(>p_net_ops);
if (err < 0)
goto unreg_rtnl_link;
- err = register_pernet_subsys(>p_net_ops);
+ err = genl_register_family(>p_genl_family);
if (err < 0)
- goto unreg_genl_family;
+ goto unreg_pernet_subsys;
pr_info("GTP module loaded (pdp ctx size %zd bytes)\n",
sizeof(struct pdp_ctx));
return 0;
-unreg_genl_family:
- genl_unregister_family(>p_genl_family);
+unreg_pernet_subsys:
+ unregister_pernet_subsys(>p_net_ops);
unreg_rtnl_link:
rtnl_link_unregister(>p_link_ops);
error_out:
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 080/122] PCI/MSI: Prevent MSI hardware interrupt number truncation
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 079/122] gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 081/122] l2tp: pass correct message length to ip6_append_data Greg Kroah-Hartman
` (47 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vidya Sagar, Thomas Gleixner,
Shanker Donthineni
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vidya Sagar <vidyas@nvidia.com>
commit db744ddd59be798c2627efbfc71f707f5a935a40 upstream.
While calculating the hardware interrupt number for a MSI interrupt, the
higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI
domain number gets truncated because of the shifted value casting to return
type of pci_domain_nr() which is 'int'. This for example is resulting in
same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.
To address this cast the PCI domain number to 'irq_hw_number_t' before left
shifting it to calculate the hardware interrupt number.
Please note that this fixes the issue only on 64-bit systems and doesn't
change the behavior for 32-bit systems i.e. the 32-bit systems continue to
have the issue. Since the issue surfaces only if there are too many PCIe
controllers in the system which usually is the case in modern server
systems and they don't tend to run 32-bit kernels.
Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/msi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1409,7 +1409,7 @@ static irq_hw_number_t pci_msi_domain_ca
return (irq_hw_number_t)desc->msi_attrib.entry_nr |
pci_dev_id(dev) << 11 |
- (pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 27;
+ ((irq_hw_number_t)(pci_domain_nr(dev->bus) & 0xFFFFFFFF)) << 27;
}
static inline bool pci_msi_desc_is_multi_msi(struct msi_desc *desc)
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 081/122] l2tp: pass correct message length to ip6_append_data
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 080/122] PCI/MSI: Prevent MSI hardware interrupt number truncation Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 082/122] ARM: ep93xx: Add terminator to gpiod_lookup_table Greg Kroah-Hartman
` (46 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, David Howells, Tom Parkin,
Simon Horman, Paolo Abeni
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tom Parkin <tparkin@katalix.com>
commit 359e54a93ab43d32ee1bff3c2f9f10cb9f6b6e79 upstream.
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent.
Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/l2tp/l2tp_ip6.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -628,7 +628,7 @@ static int l2tp_ip6_sendmsg(struct sock
back_from_confirm:
lock_sock(sk);
- ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
+ ulen = len + (skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0);
err = ip6_append_data(sk, ip_generic_getfrag, msg,
ulen, transhdrlen, &ipc6,
&fl6, (struct rt6_info *)dst,
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 082/122] ARM: ep93xx: Add terminator to gpiod_lookup_table
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 081/122] l2tp: pass correct message length to ip6_append_data Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 083/122] Revert "x86/ftrace: Use alternative RET encoding" Greg Kroah-Hartman
` (45 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko, Nikita Shubin,
Linus Walleij, Alexander Sverdlin, Arnd Bergmann
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikita Shubin <nikita.shubin@maquefel.me>
commit fdf87a0dc26d0550c60edc911cda42f9afec3557 upstream.
Without the terminator, if a con_id is passed to gpio_find() that
does not exist in the lookup table the function will not stop looping
correctly, and eventually cause an oops.
Cc: stable@vger.kernel.org
Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-ep93xx/core.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -337,6 +337,7 @@ static struct gpiod_lookup_table ep93xx_
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
GPIO_LOOKUP_IDX("G", 0, NULL, 1,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ { }
},
};
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 083/122] Revert "x86/ftrace: Use alternative RET encoding"
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 082/122] ARM: ep93xx: Add terminator to gpiod_lookup_table Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 084/122] x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBR Greg Kroah-Hartman
` (44 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Borislav Petkov (AMD)" <bp@alien8.de>
This reverts commit 3eb602ad6a94a76941f93173131a71ad36fa1324.
Revert the backport of upstream commit
1f001e9da6bb ("x86/ftrace: Use alternative RET encoding")
in favor of a proper backport after backporting the commit which adds
__text_gen_insn().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/ftrace.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -311,7 +311,7 @@ union ftrace_op_code_union {
} __attribute__((packed));
};
-#define RET_SIZE (IS_ENABLED(CONFIG_RETPOLINE) ? 5 : 1 + IS_ENABLED(CONFIG_SLS))
+#define RET_SIZE 1 + IS_ENABLED(CONFIG_SLS)
static unsigned long
create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
@@ -367,12 +367,7 @@ create_trampoline(struct ftrace_ops *ops
goto fail;
ip = trampoline + size;
-
- /* The trampoline ends with ret(q) */
- if (cpu_feature_enabled(X86_FEATURE_RETHUNK))
- memcpy(ip, text_gen_insn(JMP32_INSN_OPCODE, ip, &__x86_return_thunk), JMP32_INSN_SIZE);
- else
- memcpy(ip, retq, sizeof(retq));
+ memcpy(ip, retq, RET_SIZE);
/* No need to test direct calls on created trampolines */
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 084/122] x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBR
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 083/122] Revert "x86/ftrace: Use alternative RET encoding" Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Greg Kroah-Hartman
` (43 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Josh Poimboeuf, Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
Upstream commit: bbf92368b0b1fe472d489e62d3340d7897e9c697
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.638561109@infradead.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/text-patching.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/text-patching.h
+++ b/arch/x86/include/asm/text-patching.h
@@ -101,13 +101,21 @@ void *text_gen_insn(u8 opcode, const voi
static union text_poke_insn insn; /* per instance */
int size = text_opcode_size(opcode);
+ /*
+ * Hide the addresses to avoid the compiler folding in constants when
+ * referencing code, these can mess up annotations like
+ * ANNOTATE_NOENDBR.
+ */
+ OPTIMIZER_HIDE_VAR(addr);
+ OPTIMIZER_HIDE_VAR(dest);
+
insn.opcode = opcode;
if (size > 1) {
insn.disp = (long)dest - (long)(addr + size);
if (size == 2) {
/*
- * Ensure that for JMP9 the displacement
+ * Ensure that for JMP8 the displacement
* actually fits the signed byte.
*/
BUG_ON((insn.disp >> 31) != (insn.disp >> 7));
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 084/122] x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBR Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-03-04 18:49 ` Omar Sandoval
2024-02-27 13:27 ` [PATCH 5.10 086/122] x86/ftrace: Use alternative RET encoding Greg Kroah-Hartman
` (42 subsequent siblings)
127 siblings, 1 reply; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Josh Poimboeuf, Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
Upstream commit: ba27d1a80871eb8dbeddf34ec7d396c149cbb8d7
Less duplication is more better.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.697253958@infradead.org
[ Keep struct branch. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/text-patching.h | 20 ++++++++++++++------
arch/x86/kernel/paravirt.c | 22 +++++-----------------
2 files changed, 19 insertions(+), 23 deletions(-)
--- a/arch/x86/include/asm/text-patching.h
+++ b/arch/x86/include/asm/text-patching.h
@@ -96,32 +96,40 @@ union text_poke_insn {
};
static __always_inline
-void *text_gen_insn(u8 opcode, const void *addr, const void *dest)
+void __text_gen_insn(void *buf, u8 opcode, const void *addr, const void *dest, int size)
{
- static union text_poke_insn insn; /* per instance */
- int size = text_opcode_size(opcode);
+ union text_poke_insn *insn = buf;
+
+ BUG_ON(size < text_opcode_size(opcode));
/*
* Hide the addresses to avoid the compiler folding in constants when
* referencing code, these can mess up annotations like
* ANNOTATE_NOENDBR.
*/
+ OPTIMIZER_HIDE_VAR(insn);
OPTIMIZER_HIDE_VAR(addr);
OPTIMIZER_HIDE_VAR(dest);
- insn.opcode = opcode;
+ insn->opcode = opcode;
if (size > 1) {
- insn.disp = (long)dest - (long)(addr + size);
+ insn->disp = (long)dest - (long)(addr + size);
if (size == 2) {
/*
* Ensure that for JMP8 the displacement
* actually fits the signed byte.
*/
- BUG_ON((insn.disp >> 31) != (insn.disp >> 7));
+ BUG_ON((insn->disp >> 31) != (insn->disp >> 7));
}
}
+}
+static __always_inline
+void *text_gen_insn(u8 opcode, const void *addr, const void *dest)
+{
+ static union text_poke_insn insn; /* per instance */
+ __text_gen_insn(&insn, opcode, addr, dest, text_opcode_size(opcode));
return &insn.text;
}
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -55,28 +55,16 @@ void __init default_banner(void)
static const unsigned char ud2a[] = { 0x0f, 0x0b };
struct branch {
- unsigned char opcode;
- u32 delta;
+ unsigned char opcode;
+ u32 delta;
} __attribute__((packed));
static unsigned paravirt_patch_call(void *insn_buff, const void *target,
unsigned long addr, unsigned len)
{
- const int call_len = 5;
- struct branch *b = insn_buff;
- unsigned long delta = (unsigned long)target - (addr+call_len);
-
- if (len < call_len) {
- pr_warn("paravirt: Failed to patch indirect CALL at %ps\n", (void *)addr);
- /* Kernel might not be viable if patching fails, bail out: */
- BUG_ON(1);
- }
-
- b->opcode = 0xe8; /* call */
- b->delta = delta;
- BUILD_BUG_ON(sizeof(*b) != call_len);
-
- return call_len;
+ __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
+ (void *)addr, target, CALL_INSN_SIZE);
+ return CALL_INSN_SIZE;
}
#ifdef CONFIG_PARAVIRT_XXL
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 086/122] x86/ftrace: Use alternative RET encoding
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 087/122] x86/returnthunk: Allow different return thunks Greg Kroah-Hartman
` (41 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Borislav Petkov, Josh Poimboeuf, Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
Upstream commit: 1f001e9da6bbf482311e45e48f53c2bd2179e59c
Use the return thunk in ftrace trampolines, if needed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/ftrace.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -311,7 +311,7 @@ union ftrace_op_code_union {
} __attribute__((packed));
};
-#define RET_SIZE 1 + IS_ENABLED(CONFIG_SLS)
+#define RET_SIZE (IS_ENABLED(CONFIG_RETPOLINE) ? 5 : 1 + IS_ENABLED(CONFIG_SLS))
static unsigned long
create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
@@ -367,7 +367,10 @@ create_trampoline(struct ftrace_ops *ops
goto fail;
ip = trampoline + size;
- memcpy(ip, retq, RET_SIZE);
+ if (cpu_feature_enabled(X86_FEATURE_RETHUNK))
+ __text_gen_insn(ip, JMP32_INSN_OPCODE, ip, &__x86_return_thunk, JMP32_INSN_SIZE);
+ else
+ memcpy(ip, retq, sizeof(retq));
/* No need to test direct calls on created trampolines */
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 087/122] x86/returnthunk: Allow different return thunks
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 086/122] x86/ftrace: Use alternative RET encoding Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 088/122] Revert "x86/alternative: Make custom return thunk unconditional" Greg Kroah-Hartman
` (40 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Thomas Gleixner, Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
Upstream commit: 770ae1b709528a6a173b5c7b183818ee9b45e376
In preparation for call depth tracking on Intel SKL CPUs, make it possible
to patch in a SKL specific return thunk.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111147.680469665@infradead.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/nospec-branch.h | 6 ++++++
arch/x86/kernel/alternative.c | 19 ++++++++++++++-----
arch/x86/kernel/cpu/bugs.c | 2 ++
arch/x86/kernel/ftrace.c | 2 +-
arch/x86/kernel/static_call.c | 2 +-
arch/x86/net/bpf_jit_comp.c | 2 +-
6 files changed, 25 insertions(+), 8 deletions(-)
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -207,6 +207,12 @@ extern void srso_alias_untrain_ret(void)
extern void entry_untrain_ret(void);
extern void entry_ibpb(void);
+#ifdef CONFIG_CALL_THUNKS
+extern void (*x86_return_thunk)(void);
+#else
+#define x86_return_thunk (&__x86_return_thunk)
+#endif
+
#ifdef CONFIG_RETPOLINE
typedef u8 retpoline_thunk_t[RETPOLINE_THUNK_SIZE];
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -676,6 +676,11 @@ void __init_or_module noinline apply_ret
}
#ifdef CONFIG_RETHUNK
+
+#ifdef CONFIG_CALL_THUNKS
+void (*x86_return_thunk)(void) __ro_after_init = &__x86_return_thunk;
+#endif
+
/*
* Rewrite the compiler generated return thunk tail-calls.
*
@@ -691,14 +696,18 @@ static int patch_return(void *addr, stru
{
int i = 0;
- if (cpu_feature_enabled(X86_FEATURE_RETHUNK))
- return -1;
-
- bytes[i++] = RET_INSN_OPCODE;
+ if (cpu_feature_enabled(X86_FEATURE_RETHUNK)) {
+ if (x86_return_thunk == __x86_return_thunk)
+ return -1;
+
+ i = JMP32_INSN_SIZE;
+ __text_gen_insn(bytes, JMP32_INSN_OPCODE, addr, x86_return_thunk, i);
+ } else {
+ bytes[i++] = RET_INSN_OPCODE;
+ }
for (; i < insn->length;)
bytes[i++] = INT3_INSN_OPCODE;
-
return i;
}
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -61,7 +61,9 @@ EXPORT_SYMBOL_GPL(x86_pred_cmd);
static DEFINE_MUTEX(spec_ctrl_mutex);
+#ifdef CONFIG_CALL_THUNKS
void (*x86_return_thunk)(void) __ro_after_init = &__x86_return_thunk;
+#endif
/* Update SPEC_CTRL MSR and its cached copy unconditionally */
static void update_spec_ctrl(u64 val)
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -368,7 +368,7 @@ create_trampoline(struct ftrace_ops *ops
ip = trampoline + size;
if (cpu_feature_enabled(X86_FEATURE_RETHUNK))
- __text_gen_insn(ip, JMP32_INSN_OPCODE, ip, &__x86_return_thunk, JMP32_INSN_SIZE);
+ __text_gen_insn(ip, JMP32_INSN_OPCODE, ip, x86_return_thunk, JMP32_INSN_SIZE);
else
memcpy(ip, retq, sizeof(retq));
--- a/arch/x86/kernel/static_call.c
+++ b/arch/x86/kernel/static_call.c
@@ -41,7 +41,7 @@ static void __ref __static_call_transfor
case RET:
if (cpu_feature_enabled(X86_FEATURE_RETHUNK))
- code = text_gen_insn(JMP32_INSN_OPCODE, insn, &__x86_return_thunk);
+ code = text_gen_insn(JMP32_INSN_OPCODE, insn, x86_return_thunk);
else
code = &retinsn;
break;
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -405,7 +405,7 @@ static void emit_return(u8 **pprog, u8 *
int cnt = 0;
if (cpu_feature_enabled(X86_FEATURE_RETHUNK)) {
- emit_jump(&prog, &__x86_return_thunk, ip);
+ emit_jump(&prog, x86_return_thunk, ip);
} else {
EMIT1(0xC3); /* ret */
if (IS_ENABLED(CONFIG_SLS))
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 088/122] Revert "x86/alternative: Make custom return thunk unconditional"
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 087/122] x86/returnthunk: Allow different return thunks Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 089/122] x86/alternative: Make custom return thunk unconditional Greg Kroah-Hartman
` (39 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Borislav Petkov (AMD)" <bp@alien8.de>
This reverts commit 08f7cfd44f77b2796582bc26164fdef44dd33b6c.
Revert the backport of upstream commit:
095b8303f383 ("x86/alternative: Make custom return thunk unconditional")
in order to backport the full version now that
770ae1b70952 ("x86/returnthunk: Allow different return thunks")
has been backported.
Revert it here so that the build breakage is kept at minimum.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/nospec-branch.h | 4 ----
arch/x86/kernel/cpu/bugs.c | 4 ----
2 files changed, 8 deletions(-)
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -190,11 +190,7 @@
_ASM_PTR " 999b\n\t" \
".popsection\n\t"
-#ifdef CONFIG_RETHUNK
extern void __x86_return_thunk(void);
-#else
-static inline void __x86_return_thunk(void) {}
-#endif
extern void retbleed_return_thunk(void);
extern void srso_return_thunk(void);
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -61,10 +61,6 @@ EXPORT_SYMBOL_GPL(x86_pred_cmd);
static DEFINE_MUTEX(spec_ctrl_mutex);
-#ifdef CONFIG_CALL_THUNKS
-void (*x86_return_thunk)(void) __ro_after_init = &__x86_return_thunk;
-#endif
-
/* Update SPEC_CTRL MSR and its cached copy unconditionally */
static void update_spec_ctrl(u64 val)
{
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 089/122] x86/alternative: Make custom return thunk unconditional
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 088/122] Revert "x86/alternative: Make custom return thunk unconditional" Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 090/122] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() Greg Kroah-Hartman
` (38 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Zijlstra (Intel),
Borislav Petkov (AMD)
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
Upstream commit: 095b8303f3835c68ac4a8b6d754ca1c3b6230711
There is infrastructure to rewrite return thunks to point to any
random thunk one desires, unwrap that from CALL_THUNKS, which up to
now was the sole user of that.
[ bp: Make the thunks visible on 32-bit and add ifdeffery for the
32-bit builds. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.775293785@infradead.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/nospec-branch.h | 8 ++++----
arch/x86/kernel/alternative.c | 4 ----
arch/x86/kernel/cpu/bugs.c | 2 ++
3 files changed, 6 insertions(+), 8 deletions(-)
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -190,7 +190,11 @@
_ASM_PTR " 999b\n\t" \
".popsection\n\t"
+#ifdef CONFIG_RETHUNK
extern void __x86_return_thunk(void);
+#else
+static inline void __x86_return_thunk(void) {}
+#endif
extern void retbleed_return_thunk(void);
extern void srso_return_thunk(void);
@@ -203,11 +207,7 @@ extern void srso_alias_untrain_ret(void)
extern void entry_untrain_ret(void);
extern void entry_ibpb(void);
-#ifdef CONFIG_CALL_THUNKS
extern void (*x86_return_thunk)(void);
-#else
-#define x86_return_thunk (&__x86_return_thunk)
-#endif
#ifdef CONFIG_RETPOLINE
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -677,10 +677,6 @@ void __init_or_module noinline apply_ret
#ifdef CONFIG_RETHUNK
-#ifdef CONFIG_CALL_THUNKS
-void (*x86_return_thunk)(void) __ro_after_init = &__x86_return_thunk;
-#endif
-
/*
* Rewrite the compiler generated return thunk tail-calls.
*
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -61,6 +61,8 @@ EXPORT_SYMBOL_GPL(x86_pred_cmd);
static DEFINE_MUTEX(spec_ctrl_mutex);
+void (*x86_return_thunk)(void) __ro_after_init = &__x86_return_thunk;
+
/* Update SPEC_CTRL MSR and its cached copy unconditionally */
static void update_spec_ctrl(u64 val)
{
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 090/122] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 089/122] x86/alternative: Make custom return thunk unconditional Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 091/122] usb: cdns3: fix memory double free when handle zero packet Greg Kroah-Hartman
` (37 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Frank Li, Roger Quadros, Peter Chen
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li <Frank.Li@nxp.com>
commit cd45f99034b0c8c9cb346dd0d6407a95ca3d36f6 upstream.
...
cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request);
list_del_init(&priv_req->list);
...
'priv_req' actually free at cdns3_gadget_ep_free_request(). But
list_del_init() use priv_req->list after it.
[ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4
[ 1542.642868][ T534]
[ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3):
[ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4
[ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3]
[ 1542.671571][ T534] usb_ep_disable+0x44/0xe4
[ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8
[ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368
[ 1542.685478][ T534] ffs_func_disable+0x18/0x28
Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this
problem.
Cc: stable@vger.kernel.org
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/cdns3/gadget.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2538,11 +2538,11 @@ static int cdns3_gadget_ep_disable(struc
while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+ list_del_init(&priv_req->list);
kfree(priv_req->request.buf);
cdns3_gadget_ep_free_request(&priv_ep->endpoint,
&priv_req->request);
- list_del_init(&priv_req->list);
--priv_ep->wa2_counter;
}
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 091/122] usb: cdns3: fix memory double free when handle zero packet
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 090/122] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 092/122] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Greg Kroah-Hartman
` (36 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Frank Li, Roger Quadros, Peter Chen
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li <Frank.Li@nxp.com>
commit 5fd9e45f1ebcd57181358af28506e8a661a260b3 upstream.
829 if (request->complete) {
830 spin_unlock(&priv_dev->lock);
831 usb_gadget_giveback_request(&priv_ep->endpoint,
832 request);
833 spin_lock(&priv_dev->lock);
834 }
835
836 if (request->buf == priv_dev->zlp_buf)
837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
Driver append an additional zero packet request when queue a packet, which
length mod max packet size is 0. When transfer complete, run to line 831,
usb_gadget_giveback_request() will free this requestion. 836 condition is
true, so cdns3_gadget_ep_free_request() free this request again.
Log:
[ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3]
[ 1920.140696][ T150]
[ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36):
[ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3]
[ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3]
Add check at line 829, skip call usb_gadget_giveback_request() if it is
additional zero length packet request. Needn't call
usb_gadget_giveback_request() because it is allocated in this driver.
Cc: stable@vger.kernel.org
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/cdns3/gadget.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -837,7 +837,11 @@ void cdns3_gadget_giveback(struct cdns3_
return;
}
- if (request->complete) {
+ /*
+ * zlp request is appended by driver, needn't call usb_gadget_giveback_request() to notify
+ * gadget composite driver.
+ */
+ if (request->complete && request->buf != priv_dev->zlp_buf) {
spin_unlock(&priv_dev->lock);
usb_gadget_giveback_request(&priv_ep->endpoint,
request);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 092/122] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 091/122] usb: cdns3: fix memory double free when handle zero packet Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 093/122] usb: roles: fix NULL pointer issue when put modules reference Greg Kroah-Hartman
` (35 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krishna Kurapati,
Maciej Żenczykowski
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati <quic_kriskura@quicinc.com>
commit 76c51146820c5dac629f21deafab0a7039bc3ccd upstream.
It is observed sometimes when tethering is used over NCM with Windows 11
as host, at some instances, the gadget_giveback has one byte appended at
the end of a proper NTB. When the NTB is parsed, unwrap call looks for
any leftover bytes in SKB provided by u_ether and if there are any pending
bytes, it treats them as a separate NTB and parses it. But in case the
second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that
were parsed properly in the first NTB and saved in rx_list are dropped.
Adding a few custom traces showed the following:
[002] d..1 7828.532866: dwc3_gadget_giveback: ep1out:
req 000000003868811a length 1025/16384 zsI ==> 0
[002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025
[002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10
[002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames
In this case, the giveback is of 1025 bytes and block length is 1024.
The rest 1 byte (which is 0x00) won't be parsed resulting in drop of
all datagrams in rx_list.
Same is case with packets of size 2048:
[002] d..1 7828.557948: dwc3_gadget_giveback: ep1out:
req 0000000011dfd96e length 2049/16384 zsI ==> 0
[002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800
Lecroy shows one byte coming in extra confirming that the byte is coming
in from PC:
Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590)
- Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590)
--- Packet 4063861
Data(1024 bytes)
Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590)
--- Packet 4063863
Data(1 byte)
Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722)
According to Windows driver, no ZLP is needed if wBlockLength is non-zero,
because the non-zero wBlockLength has already told the function side the
size of transfer to be expected. However, there are in-market NCM devices
that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize.
To deal with such devices, it pads an extra 0 at end so the transfer is no
longer multiple of wMaxPacketSize.
Cc: <stable@vger.kernel.org>
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240205074650.200304-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/function/f_ncm.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1349,7 +1349,15 @@ parse_ntb:
"Parsed NTB with %d frames\n", dgram_counter);
to_process -= block_len;
- if (to_process != 0) {
+
+ /*
+ * Windows NCM driver avoids USB ZLPs by adding a 1-byte
+ * zero pad as needed.
+ */
+ if (to_process == 1 &&
+ (*(unsigned char *)(ntb_ptr + block_len) == 0x00)) {
+ to_process--;
+ } else if (to_process > 0) {
ntb_ptr = (unsigned char *)(ntb_ptr + block_len);
goto parse_ntb;
}
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 093/122] usb: roles: fix NULL pointer issue when put modules reference
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 092/122] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 094/122] usb: roles: dont get/set_role() when usb_role_switch is unregistered Greg Kroah-Hartman
` (34 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Xu Yang, Heikki Krogerus
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang <xu.yang_2@nxp.com>
commit 1c9be13846c0b2abc2480602f8ef421360e1ad9e upstream.
In current design, usb role class driver will get usb_role_switch parent's
module reference after the user get usb_role_switch device and put the
reference after the user put the usb_role_switch device. However, the
parent device of usb_role_switch may be removed before the user put the
usb_role_switch. If so, then, NULL pointer issue will be met when the user
put the parent module's reference.
This will save the module pointer in structure of usb_role_switch. Then,
we don't need to find module by iterating long relations.
Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting")
cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/roles/class.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -19,6 +19,7 @@ static struct class *role_class;
struct usb_role_switch {
struct device dev;
struct mutex lock; /* device lock*/
+ struct module *module; /* the module this device depends on */
enum usb_role role;
/* From descriptor */
@@ -133,7 +134,7 @@ struct usb_role_switch *usb_role_switch_
usb_role_switch_match);
if (!IS_ERR_OR_NULL(sw))
- WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+ WARN_ON(!try_module_get(sw->module));
return sw;
}
@@ -155,7 +156,7 @@ struct usb_role_switch *fwnode_usb_role_
sw = fwnode_connection_find_match(fwnode, "usb-role-switch",
NULL, usb_role_switch_match);
if (!IS_ERR_OR_NULL(sw))
- WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+ WARN_ON(!try_module_get(sw->module));
return sw;
}
@@ -170,7 +171,7 @@ EXPORT_SYMBOL_GPL(fwnode_usb_role_switch
void usb_role_switch_put(struct usb_role_switch *sw)
{
if (!IS_ERR_OR_NULL(sw)) {
- module_put(sw->dev.parent->driver->owner);
+ module_put(sw->module);
put_device(&sw->dev);
}
}
@@ -187,15 +188,18 @@ struct usb_role_switch *
usb_role_switch_find_by_fwnode(const struct fwnode_handle *fwnode)
{
struct device *dev;
+ struct usb_role_switch *sw = NULL;
if (!fwnode)
return NULL;
dev = class_find_device_by_fwnode(role_class, fwnode);
- if (dev)
- WARN_ON(!try_module_get(dev->parent->driver->owner));
+ if (dev) {
+ sw = to_role_switch(dev);
+ WARN_ON(!try_module_get(sw->module));
+ }
- return dev ? to_role_switch(dev) : NULL;
+ return sw;
}
EXPORT_SYMBOL_GPL(usb_role_switch_find_by_fwnode);
@@ -328,6 +332,7 @@ usb_role_switch_register(struct device *
sw->set = desc->set;
sw->get = desc->get;
+ sw->module = parent->driver->owner;
sw->dev.parent = parent;
sw->dev.fwnode = desc->fwnode;
sw->dev.class = role_class;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 094/122] usb: roles: dont get/set_role() when usb_role_switch is unregistered
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 093/122] usb: roles: fix NULL pointer issue when put modules reference Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 095/122] mptcp: fix lockless access in subflow ULP diag Greg Kroah-Hartman
` (33 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Xu Yang, Heikki Krogerus
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang <xu.yang_2@nxp.com>
commit b787a3e781759026a6212736ef8e52cf83d1821a upstream.
There is a possibility that usb_role_switch device is unregistered before
the user put usb_role_switch. In this case, the user may still want to
get/set_role() since the user can't sense the changes of usb_role_switch.
This will add a flag to show if usb_role_switch is already registered and
avoid unwanted behaviors.
Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches")
cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/roles/class.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -21,6 +21,7 @@ struct usb_role_switch {
struct mutex lock; /* device lock*/
struct module *module; /* the module this device depends on */
enum usb_role role;
+ bool registered;
/* From descriptor */
struct device *usb2_port;
@@ -47,6 +48,9 @@ int usb_role_switch_set_role(struct usb_
if (IS_ERR_OR_NULL(sw))
return 0;
+ if (!sw->registered)
+ return -EOPNOTSUPP;
+
mutex_lock(&sw->lock);
ret = sw->set(sw, role);
@@ -72,7 +76,7 @@ enum usb_role usb_role_switch_get_role(s
{
enum usb_role role;
- if (IS_ERR_OR_NULL(sw))
+ if (IS_ERR_OR_NULL(sw) || !sw->registered)
return USB_ROLE_NONE;
mutex_lock(&sw->lock);
@@ -347,6 +351,8 @@ usb_role_switch_register(struct device *
return ERR_PTR(ret);
}
+ sw->registered = true;
+
/* TODO: Symlinks for the host port and the device controller. */
return sw;
@@ -361,8 +367,10 @@ EXPORT_SYMBOL_GPL(usb_role_switch_regist
*/
void usb_role_switch_unregister(struct usb_role_switch *sw)
{
- if (!IS_ERR_OR_NULL(sw))
+ if (!IS_ERR_OR_NULL(sw)) {
+ sw->registered = false;
device_unregister(&sw->dev);
+ }
}
EXPORT_SYMBOL_GPL(usb_role_switch_unregister);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 095/122] mptcp: fix lockless access in subflow ULP diag
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 094/122] usb: roles: dont get/set_role() when usb_role_switch is unregistered Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 096/122] IB/hfi1: Fix a memleak in init_credit_return Greg Kroah-Hartman
` (32 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paolo Abeni, Mat Martineau,
Matthieu Baerts (NGI0), David S. Miller
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <pabeni@redhat.com>
commit b8adb69a7d29c2d33eb327bca66476fb6066516b upstream.
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/tcp.h | 2 +-
net/mptcp/diag.c | 6 +++++-
net/tls/tls_main.c | 2 +-
3 files changed, 7 insertions(+), 3 deletions(-)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -2224,7 +2224,7 @@ struct tcp_ulp_ops {
/* cleanup ulp */
void (*release)(struct sock *sk);
/* diagnostic */
- int (*get_info)(const struct sock *sk, struct sk_buff *skb);
+ int (*get_info)(struct sock *sk, struct sk_buff *skb);
size_t (*get_info_size)(const struct sock *sk);
/* clone ulp */
void (*clone)(const struct request_sock *req, struct sock *newsk,
--- a/net/mptcp/diag.c
+++ b/net/mptcp/diag.c
@@ -13,17 +13,19 @@
#include <uapi/linux/mptcp.h>
#include "protocol.h"
-static int subflow_get_info(const struct sock *sk, struct sk_buff *skb)
+static int subflow_get_info(struct sock *sk, struct sk_buff *skb)
{
struct mptcp_subflow_context *sf;
struct nlattr *start;
u32 flags = 0;
+ bool slow;
int err;
start = nla_nest_start_noflag(skb, INET_ULP_INFO_MPTCP);
if (!start)
return -EMSGSIZE;
+ slow = lock_sock_fast(sk);
rcu_read_lock();
sf = rcu_dereference(inet_csk(sk)->icsk_ulp_data);
if (!sf) {
@@ -69,11 +71,13 @@ static int subflow_get_info(const struct
}
rcu_read_unlock();
+ unlock_sock_fast(sk, slow);
nla_nest_end(skb, start);
return 0;
nla_failure:
rcu_read_unlock();
+ unlock_sock_fast(sk, slow);
nla_nest_cancel(skb, start);
return err;
}
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -800,7 +800,7 @@ static void tls_update(struct sock *sk,
}
}
-static int tls_get_info(const struct sock *sk, struct sk_buff *skb)
+static int tls_get_info(struct sock *sk, struct sk_buff *skb)
{
u16 version, cipher_type;
struct tls_context *ctx;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 096/122] IB/hfi1: Fix a memleak in init_credit_return
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 095/122] mptcp: fix lockless access in subflow ULP diag Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 097/122] RDMA/bnxt_re: Return error for SRQ resize Greg Kroah-Hartman
` (31 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zhipeng Lu, Dennis Dalessandro,
Leon Romanovsky, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhipeng Lu <alexious@zju.edu.cn>
[ Upstream commit 809aa64ebff51eb170ee31a95f83b2d21efa32e2 ]
When dma_alloc_coherent fails to allocate dd->cr_base[i].va,
init_credit_return should deallocate dd->cr_base and
dd->cr_base[i] that allocated before. Or those resources
would be never freed and a memleak is triggered.
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Link: https://lore.kernel.org/r/20240112085523.3731720-1-alexious@zju.edu.cn
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/hfi1/pio.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c
index 60eb3a64518f3..969004258692b 100644
--- a/drivers/infiniband/hw/hfi1/pio.c
+++ b/drivers/infiniband/hw/hfi1/pio.c
@@ -2131,7 +2131,7 @@ int init_credit_return(struct hfi1_devdata *dd)
"Unable to allocate credit return DMA range for NUMA %d\n",
i);
ret = -ENOMEM;
- goto done;
+ goto free_cr_base;
}
}
set_dev_node(&dd->pcidev->dev, dd->node);
@@ -2139,6 +2139,10 @@ int init_credit_return(struct hfi1_devdata *dd)
ret = 0;
done:
return ret;
+
+free_cr_base:
+ free_credit_return(dd);
+ goto done;
}
void free_credit_return(struct hfi1_devdata *dd)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 097/122] RDMA/bnxt_re: Return error for SRQ resize
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 096/122] IB/hfi1: Fix a memleak in init_credit_return Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 098/122] RDMA/srpt: Support specifying the srpt_service_guid parameter Greg Kroah-Hartman
` (30 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kalesh AP, Selvin Xavier,
Leon Romanovsky, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
[ Upstream commit 3687b450c5f32e80f179ce4b09e0454da1449eac ]
SRQ resize is not supported in the driver. But driver is not
returning error from bnxt_re_modify_srq() for SRQ resize.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1705985677-15551-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 2a973a1390a4a..a0d7777acb6d4 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -1711,7 +1711,7 @@ int bnxt_re_modify_srq(struct ib_srq *ib_srq, struct ib_srq_attr *srq_attr,
switch (srq_attr_mask) {
case IB_SRQ_MAX_WR:
/* SRQ resize is not supported */
- break;
+ return -EINVAL;
case IB_SRQ_LIMIT:
/* Change the SRQ threshold */
if (srq_attr->srq_limit > srq->qplib_srq.max_wqe)
@@ -1726,13 +1726,12 @@ int bnxt_re_modify_srq(struct ib_srq *ib_srq, struct ib_srq_attr *srq_attr,
/* On success, update the shadow */
srq->srq_limit = srq_attr->srq_limit;
/* No need to Build and send response back to udata */
- break;
+ return 0;
default:
ibdev_err(&rdev->ibdev,
"Unsupported srq_attr_mask 0x%x", srq_attr_mask);
return -EINVAL;
}
- return 0;
}
int bnxt_re_query_srq(struct ib_srq *ib_srq, struct ib_srq_attr *srq_attr)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 098/122] RDMA/srpt: Support specifying the srpt_service_guid parameter
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 097/122] RDMA/bnxt_re: Return error for SRQ resize Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 099/122] RDMA/qedr: Fix qedr_create_user_qp error flow Greg Kroah-Hartman
` (29 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, LiHonggang, Bart Van Assche,
Leon Romanovsky, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <bvanassche@acm.org>
[ Upstream commit fdfa083549de5d50ebf7f6811f33757781e838c0 ]
Make loading ib_srpt with this parameter set work. The current behavior is
that setting that parameter while loading the ib_srpt kernel module
triggers the following kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
parse_one+0x18c/0x1d0
parse_args+0xe1/0x230
load_module+0x8de/0xa60
init_module_from_file+0x8b/0xd0
idempotent_init_module+0x181/0x240
__x64_sys_finit_module+0x5a/0xb0
do_syscall_64+0x5f/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: LiHonggang <honggangli@163.com>
Reported-by: LiHonggang <honggangli@163.com>
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 983f59c87b79f..80e99e9e97172 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -79,12 +79,16 @@ module_param(srpt_srq_size, int, 0444);
MODULE_PARM_DESC(srpt_srq_size,
"Shared receive queue (SRQ) size.");
+static int srpt_set_u64_x(const char *buffer, const struct kernel_param *kp)
+{
+ return kstrtou64(buffer, 16, (u64 *)kp->arg);
+}
static int srpt_get_u64_x(char *buffer, const struct kernel_param *kp)
{
return sprintf(buffer, "0x%016llx\n", *(u64 *)kp->arg);
}
-module_param_call(srpt_service_guid, NULL, srpt_get_u64_x, &srpt_service_guid,
- 0444);
+module_param_call(srpt_service_guid, srpt_set_u64_x, srpt_get_u64_x,
+ &srpt_service_guid, 0444);
MODULE_PARM_DESC(srpt_service_guid,
"Using this value for ioc_guid, id_ext, and cm_listen_id instead of using the node_guid of the first HCA.");
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 099/122] RDMA/qedr: Fix qedr_create_user_qp error flow
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 098/122] RDMA/srpt: Support specifying the srpt_service_guid parameter Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 100/122] arm64: dts: rockchip: set num-cs property for spi on px30 Greg Kroah-Hartman
` (28 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kamal Heib, Leon Romanovsky,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kamal Heib <kheib@redhat.com>
[ Upstream commit 5ba4e6d5863c53e937f49932dee0ecb004c65928 ]
Avoid the following warning by making sure to free the allocated
resources in case that qedr_init_user_queue() fail.
-----------[ cut here ]-----------
WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3
ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt]
CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1
Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022
RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff
RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286
RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016
RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80
R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? ib_uverbs_close+0x1f/0xb0 [ib_uverbs]
? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
? __warn+0x81/0x110
? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
? report_bug+0x10a/0x140
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs]
ib_uverbs_close+0x1f/0xb0 [ib_uverbs]
__fput+0x94/0x250
task_work_run+0x5c/0x90
do_exit+0x270/0x4a0
do_group_exit+0x2d/0x90
get_signal+0x87c/0x8c0
arch_do_signal_or_restart+0x25/0x100
? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs]
exit_to_user_mode_loop+0x9c/0x130
exit_to_user_mode_prepare+0xb6/0x100
syscall_exit_to_user_mode+0x12/0x40
do_syscall_64+0x69/0x90
? syscall_exit_work+0x103/0x130
? syscall_exit_to_user_mode+0x22/0x40
? do_syscall_64+0x69/0x90
? syscall_exit_work+0x103/0x130
? syscall_exit_to_user_mode+0x22/0x40
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
? common_interrupt+0x43/0xa0
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x1470abe3ec6b
Code: Unable to access opcode bytes at RIP 0x1470abe3ec41.
RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b
RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004
RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00
R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358
R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470
</TASK>
--[ end trace 888a9b92e04c5c97 ]--
Fixes: df15856132bc ("RDMA/qedr: restructure functions that create/destroy QPs")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Link: https://lore.kernel.org/r/20240208223628.2040841-1-kheib@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/qedr/verbs.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 3543b9af10b7a..d382ac21159c2 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -1865,8 +1865,17 @@ static int qedr_create_user_qp(struct qedr_dev *dev,
/* RQ - read access only (0) */
rc = qedr_init_user_queue(udata, dev, &qp->urq, ureq.rq_addr,
ureq.rq_len, true, 0, alloc_and_init);
- if (rc)
+ if (rc) {
+ ib_umem_release(qp->usq.umem);
+ qp->usq.umem = NULL;
+ if (rdma_protocol_roce(&dev->ibdev, 1)) {
+ qedr_free_pbl(dev, &qp->usq.pbl_info,
+ qp->usq.pbl_tbl);
+ } else {
+ kfree(qp->usq.pbl_tbl);
+ }
return rc;
+ }
}
memset(&in_params, 0, sizeof(in_params));
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 100/122] arm64: dts: rockchip: set num-cs property for spi on px30
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 099/122] RDMA/qedr: Fix qedr_create_user_qp error flow Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 101/122] RDMA/srpt: fix function pointer cast warnings Greg Kroah-Hartman
` (27 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Heiko Stuebner, Quentin Schulz,
Heiko Stuebner, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Stuebner <heiko.stuebner@cherry.de>
[ Upstream commit 334bf0710c98d391f4067b72f535d6c4c84dfb6f ]
The px30 has two spi controllers with two chip-selects each.
The num-cs property is specified as the total number of chip
selects a controllers has and is used since 2020 to find uses
of chipselects outside that range in the Rockchip spi driver.
Without the property set, the default is 1, so spi devices
using the second chipselect will not be created.
Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240119101656.965744-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 0d6761074b11a..f241e7c318bcd 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -577,6 +577,7 @@
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 12>, <&dmac 13>;
dma-names = "tx", "rx";
+ num-cs = <2>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
#address-cells = <1>;
@@ -592,6 +593,7 @@
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 14>, <&dmac 15>;
dma-names = "tx", "rx";
+ num-cs = <2>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
#address-cells = <1>;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 101/122] RDMA/srpt: fix function pointer cast warnings
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 100/122] arm64: dts: rockchip: set num-cs property for spi on px30 Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 102/122] bpf, scripts: Correct GPL license name Greg Kroah-Hartman
` (26 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Bart Van Assche,
Leon Romanovsky, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit eb5c7465c3240151cd42a55c7ace9da0026308a1 ]
clang-16 notices that srpt_qp_event() gets called through an incompatible
pointer here:
drivers/infiniband/ulp/srpt/ib_srpt.c:1815:5: error: cast from 'void (*)(struct ib_event *, struct srpt_rdma_ch *)' to 'void (*)(struct ib_event *, void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1815 | = (void(*)(struct ib_event *, void*))srpt_qp_event;
Change srpt_qp_event() to use the correct prototype and adjust the
argument inside of it.
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213100728.458348-1-arnd@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 80e99e9e97172..41abf9cf11c67 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -214,10 +214,12 @@ static const char *get_ch_state_name(enum rdma_ch_state s)
/**
* srpt_qp_event - QP event callback function
* @event: Description of the event that occurred.
- * @ch: SRPT RDMA channel.
+ * @ptr: SRPT RDMA channel.
*/
-static void srpt_qp_event(struct ib_event *event, struct srpt_rdma_ch *ch)
+static void srpt_qp_event(struct ib_event *event, void *ptr)
{
+ struct srpt_rdma_ch *ch = ptr;
+
pr_debug("QP event %d on ch=%p sess_name=%s-%d state=%s\n",
event->event, ch, ch->sess_name, ch->qp->qp_num,
get_ch_state_name(ch->state));
@@ -1807,8 +1809,7 @@ static int srpt_create_ch_ib(struct srpt_rdma_ch *ch)
ch->cq_size = ch->rq_size + sq_size;
qp_init->qp_context = (void *)ch;
- qp_init->event_handler
- = (void(*)(struct ib_event *, void*))srpt_qp_event;
+ qp_init->event_handler = srpt_qp_event;
qp_init->send_cq = ch->cq;
qp_init->recv_cq = ch->cq;
qp_init->sq_sig_type = IB_SIGNAL_REQ_WR;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 102/122] bpf, scripts: Correct GPL license name
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 101/122] RDMA/srpt: fix function pointer cast warnings Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 103/122] scsi: jazz_esp: Only build if SCSI core is builtin Greg Kroah-Hartman
` (25 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gianmarco Lusvardi, Daniel Borkmann,
Quentin Monnet, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gianmarco Lusvardi <glusvardi@posteo.net>
[ Upstream commit e37243b65d528a8a9f8b9a57a43885f8e8dfc15c ]
The bpf_doc script refers to the GPL as the "GNU Privacy License".
I strongly suspect that the author wanted to refer to the GNU General
Public License, under which the Linux kernel is released, as, to the
best of my knowledge, there is no license named "GNU Privacy License".
This patch corrects the license name in the script accordingly.
Fixes: 56a092c89505 ("bpf: add script and prepare bpf.h for new helpers documentation")
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
scripts/bpf_helpers_doc.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/bpf_helpers_doc.py b/scripts/bpf_helpers_doc.py
index 31484377b8b11..806240dda6090 100755
--- a/scripts/bpf_helpers_doc.py
+++ b/scripts/bpf_helpers_doc.py
@@ -284,7 +284,7 @@ eBPF programs can have an associated license, passed along with the bytecode
instructions to the kernel when the programs are loaded. The format for that
string is identical to the one in use for kernel modules (Dual licenses, such
as "Dual BSD/GPL", may be used). Some helper functions are only accessible to
-programs that are compatible with the GNU Privacy License (GPL).
+programs that are compatible with the GNU General Public License (GNU GPL).
In order to use such helpers, the eBPF program must be loaded with the correct
license string passed (via **attr**) to the **bpf**\ () system call, and this
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 103/122] scsi: jazz_esp: Only build if SCSI core is builtin
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 102/122] bpf, scripts: Correct GPL license name Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 104/122] nouveau: fix function cast warnings Greg Kroah-Hartman
` (24 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Randy Dunlap, Thomas Bogendoerfer,
linux-mips, Arnd Bergmann, Masahiro Yamada, Nicolas Schier,
James E.J. Bottomley, Martin K. Petersen, linux-scsi,
Geert Uytterhoeven, kernel test robot, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit 9ddf190a7df77b77817f955fdb9c2ae9d1c9c9a3 ]
JAZZ_ESP is a bool kconfig symbol that selects SCSI_SPI_ATTRS. When
CONFIG_SCSI=m, this results in SCSI_SPI_ATTRS=m while JAZZ_ESP=y, which
causes many undefined symbol linker errors.
Fix this by only offering to build this driver when CONFIG_SCSI=y.
[mkp: JAZZ_ESP is unique in that it does not support being compiled as a
module unlike the remaining SPI SCSI HBA drivers]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240214055953.9612-1-rdunlap@infradead.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402112222.Gl0udKyU-lkp@intel.com/
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6524e1fe54d2e..f59c9002468cc 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1289,7 +1289,7 @@ source "drivers/scsi/arm/Kconfig"
config JAZZ_ESP
bool "MIPS JAZZ FAS216 SCSI support"
- depends on MACH_JAZZ && SCSI
+ depends on MACH_JAZZ && SCSI=y
select SCSI_SPI_ATTRS
help
This is the driver for the onboard SCSI host adapter of MIPS Magnum
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 104/122] nouveau: fix function cast warnings
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 103/122] scsi: jazz_esp: Only build if SCSI core is builtin Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 105/122] ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid Greg Kroah-Hartman
` (23 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Danilo Krummrich,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
[ Upstream commit 0affdba22aca5573f9d989bcb1d71d32a6a03efe ]
clang-16 warns about casting between incompatible function types:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
161 | .fini = (void(*)(void *))release_firmware,
This one was done to use the generic shadow_fw_release() function as a
callback for struct nvbios_source. Change it to use the same prototype
as the other five instances, with a trivial helper function that actually
calls release_firmware.
Fixes: 70c0f263cc2e ("drm/nouveau/bios: pull in basic vbios subdev, more to come later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c
index 4b571cc6bc70f..6597def18627e 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c
@@ -154,11 +154,17 @@ shadow_fw_init(struct nvkm_bios *bios, const char *name)
return (void *)fw;
}
+static void
+shadow_fw_release(void *fw)
+{
+ release_firmware(fw);
+}
+
static const struct nvbios_source
shadow_fw = {
.name = "firmware",
.init = shadow_fw_init,
- .fini = (void(*)(void *))release_firmware,
+ .fini = shadow_fw_release,
.read = shadow_fw_read,
.rw = false,
};
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 105/122] ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 104/122] nouveau: fix function cast warnings Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 106/122] ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid Greg Kroah-Hartman
` (22 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, Nicolas Dichtel,
David S. Miller, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 081a0e3b0d4c061419d3f4679dec9f68725b17e4 ]
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/devinet.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index da1ca8081c035..9ac7d47d27b81 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1798,6 +1798,21 @@ static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb,
return err;
}
+/* Combine dev_addr_genid and dev_base_seq to detect changes.
+ */
+static u32 inet_base_seq(const struct net *net)
+{
+ u32 res = atomic_read(&net->ipv4.dev_addr_genid) +
+ net->dev_base_seq;
+
+ /* Must not return 0 (see nl_dump_check_consistent()).
+ * Chose a value far away from 0.
+ */
+ if (!res)
+ res = 0x80000000;
+ return res;
+}
+
static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb)
{
const struct nlmsghdr *nlh = cb->nlh;
@@ -1849,8 +1864,7 @@ static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb)
idx = 0;
head = &tgt_net->dev_index_head[h];
rcu_read_lock();
- cb->seq = atomic_read(&tgt_net->ipv4.dev_addr_genid) ^
- tgt_net->dev_base_seq;
+ cb->seq = inet_base_seq(tgt_net);
hlist_for_each_entry_rcu(dev, head, index_hlist) {
if (idx < s_idx)
goto cont;
@@ -2249,8 +2263,7 @@ static int inet_netconf_dump_devconf(struct sk_buff *skb,
idx = 0;
head = &net->dev_index_head[h];
rcu_read_lock();
- cb->seq = atomic_read(&net->ipv4.dev_addr_genid) ^
- net->dev_base_seq;
+ cb->seq = inet_base_seq(net);
hlist_for_each_entry_rcu(dev, head, index_hlist) {
if (idx < s_idx)
goto cont;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 106/122] ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 105/122] ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 107/122] afs: Increase buffer size in afs_update_volume_status() Greg Kroah-Hartman
` (21 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Dumazet, Nicolas Dichtel,
David S. Miller, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit e898e4cd1aab271ca414f9ac6e08e4c761f6913c ]
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/addrconf.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 79787a1f5ab34..150c2f71ec89f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -698,6 +698,22 @@ static int inet6_netconf_get_devconf(struct sk_buff *in_skb,
return err;
}
+/* Combine dev_addr_genid and dev_base_seq to detect changes.
+ */
+static u32 inet6_base_seq(const struct net *net)
+{
+ u32 res = atomic_read(&net->ipv6.dev_addr_genid) +
+ net->dev_base_seq;
+
+ /* Must not return 0 (see nl_dump_check_consistent()).
+ * Chose a value far away from 0.
+ */
+ if (!res)
+ res = 0x80000000;
+ return res;
+}
+
+
static int inet6_netconf_dump_devconf(struct sk_buff *skb,
struct netlink_callback *cb)
{
@@ -731,8 +747,7 @@ static int inet6_netconf_dump_devconf(struct sk_buff *skb,
idx = 0;
head = &net->dev_index_head[h];
rcu_read_lock();
- cb->seq = atomic_read(&net->ipv6.dev_addr_genid) ^
- net->dev_base_seq;
+ cb->seq = inet6_base_seq(net);
hlist_for_each_entry_rcu(dev, head, index_hlist) {
if (idx < s_idx)
goto cont;
@@ -5288,7 +5303,7 @@ static int inet6_dump_addr(struct sk_buff *skb, struct netlink_callback *cb,
}
rcu_read_lock();
- cb->seq = atomic_read(&tgt_net->ipv6.dev_addr_genid) ^ tgt_net->dev_base_seq;
+ cb->seq = inet6_base_seq(tgt_net);
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &tgt_net->dev_index_head[h];
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 107/122] afs: Increase buffer size in afs_update_volume_status()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 106/122] ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 108/122] ipv6: sr: fix possible use-after-free and null-ptr-deref Greg Kroah-Hartman
` (20 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Daniil Dulov, David Howells,
Christian Brauner, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniil Dulov <d.dulov@aladdin.ru>
[ Upstream commit 6ea38e2aeb72349cad50e38899b0ba6fbcb2af3d ]
The max length of volume->vid value is 20 characters.
So increase idbuf[] size up to 24 to avoid overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240211150442.3416-1-d.dulov@aladdin.ru/ # v1
Link: https://lore.kernel.org/r/20240212083347.10742-1-d.dulov@aladdin.ru/ # v2
Link: https://lore.kernel.org/r/20240219143906.138346-3-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/afs/volume.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index f84194b791d3e..fb19c69284ab2 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -302,7 +302,7 @@ static int afs_update_volume_status(struct afs_volume *volume, struct key *key)
{
struct afs_server_list *new, *old, *discard;
struct afs_vldb_entry *vldb;
- char idbuf[16];
+ char idbuf[24];
int ret, idsz;
_enter("");
@@ -310,7 +310,7 @@ static int afs_update_volume_status(struct afs_volume *volume, struct key *key)
/* We look up an ID by passing it as a decimal string in the
* operation's name parameter.
*/
- idsz = sprintf(idbuf, "%llu", volume->vid);
+ idsz = snprintf(idbuf, sizeof(idbuf), "%llu", volume->vid);
vldb = afs_vl_lookup_vldb(volume->cell, key, idbuf, idsz);
if (IS_ERR(vldb)) {
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 108/122] ipv6: sr: fix possible use-after-free and null-ptr-deref
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 107/122] afs: Increase buffer size in afs_update_volume_status() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 109/122] packet: move from strlcpy with unused retval to strscpy Greg Kroah-Hartman
` (19 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vasiliy Kovalev, Paolo Abeni,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev <kovalev@altlinux.org>
[ Upstream commit 5559cea2d5aa3018a5f00dd2aca3427ba09b386b ]
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/seg6.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index 2278c0234c497..a8439fded12dc 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -451,22 +451,24 @@ int __init seg6_init(void)
{
int err;
- err = genl_register_family(&seg6_genl_family);
+ err = register_pernet_subsys(&ip6_segments_ops);
if (err)
goto out;
- err = register_pernet_subsys(&ip6_segments_ops);
+ err = genl_register_family(&seg6_genl_family);
if (err)
- goto out_unregister_genl;
+ goto out_unregister_pernet;
#ifdef CONFIG_IPV6_SEG6_LWTUNNEL
err = seg6_iptunnel_init();
if (err)
- goto out_unregister_pernet;
+ goto out_unregister_genl;
err = seg6_local_init();
- if (err)
- goto out_unregister_pernet;
+ if (err) {
+ seg6_iptunnel_exit();
+ goto out_unregister_genl;
+ }
#endif
#ifdef CONFIG_IPV6_SEG6_HMAC
@@ -487,11 +489,11 @@ int __init seg6_init(void)
#endif
#endif
#ifdef CONFIG_IPV6_SEG6_LWTUNNEL
-out_unregister_pernet:
- unregister_pernet_subsys(&ip6_segments_ops);
-#endif
out_unregister_genl:
genl_unregister_family(&seg6_genl_family);
+#endif
+out_unregister_pernet:
+ unregister_pernet_subsys(&ip6_segments_ops);
goto out;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 109/122] packet: move from strlcpy with unused retval to strscpy
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 108/122] ipv6: sr: fix possible use-after-free and null-ptr-deref Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 110/122] net: dev: Convert sa_data to flexible array in struct sockaddr Greg Kroah-Hartman
` (18 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wolfram Sang, Jakub Kicinski,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
[ Upstream commit 8fc9d51ea2d32a05f7d7cf86a25cc86ecc57eb45 ]
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818210227.8611-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7d6027790ac ("arp: Prevent overflow in arp_req_get().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/packet/af_packet.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index b292d58fdcc4c..1052cbcdd3c8d 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1871,7 +1871,7 @@ static int packet_rcv_spkt(struct sk_buff *skb, struct net_device *dev,
*/
spkt->spkt_family = dev->type;
- strlcpy(spkt->spkt_device, dev->name, sizeof(spkt->spkt_device));
+ strscpy(spkt->spkt_device, dev->name, sizeof(spkt->spkt_device));
spkt->spkt_protocol = skb->protocol;
/*
@@ -3540,7 +3540,7 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr,
rcu_read_lock();
dev = dev_get_by_index_rcu(sock_net(sk), READ_ONCE(pkt_sk(sk)->ifindex));
if (dev)
- strlcpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data));
+ strscpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data));
rcu_read_unlock();
return sizeof(*uaddr);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 110/122] net: dev: Convert sa_data to flexible array in struct sockaddr
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 109/122] packet: move from strlcpy with unused retval to strscpy Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 111/122] s390: use the correct count for __iowrite64_copy() Greg Kroah-Hartman
` (17 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jens Axboe, Pavel Begunkov,
David Ahern, Dylan Yudaken, Yajun Deng, Petr Machata, Hangbin Liu,
Leon Romanovsky, syzbot, Willem de Bruijn, Pablo Neira Ayuso,
Kees Cook, Jakub Kicinski, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <keescook@chromium.org>
[ Upstream commit b5f0de6df6dce8d641ef58ef7012f3304dffb9a1 ]
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7d6027790ac ("arp: Prevent overflow in arp_req_get().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/socket.h | 5 ++++-
net/core/dev.c | 2 +-
net/core/dev_ioctl.c | 2 +-
net/packet/af_packet.c | 10 +++++-----
4 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/include/linux/socket.h b/include/linux/socket.h
index c3b35d18bcd30..daf51fef5a8d1 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -31,7 +31,10 @@ typedef __kernel_sa_family_t sa_family_t;
struct sockaddr {
sa_family_t sa_family; /* address family, AF_xxx */
- char sa_data[14]; /* 14 bytes of protocol address */
+ union {
+ char sa_data_min[14]; /* Minimum 14 bytes of protocol address */
+ DECLARE_FLEX_ARRAY(char, sa_data);
+ };
};
struct linger {
diff --git a/net/core/dev.c b/net/core/dev.c
index fc881d60a9dcc..0619d2253aa24 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -8787,7 +8787,7 @@ EXPORT_SYMBOL(dev_set_mac_address_user);
int dev_get_mac_address(struct sockaddr *sa, struct net *net, char *dev_name)
{
- size_t size = sizeof(sa->sa_data);
+ size_t size = sizeof(sa->sa_data_min);
struct net_device *dev;
int ret = 0;
diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c
index 993420da29307..60e815a71909a 100644
--- a/net/core/dev_ioctl.c
+++ b/net/core/dev_ioctl.c
@@ -245,7 +245,7 @@ static int dev_ifsioc(struct net *net, struct ifreq *ifr, unsigned int cmd)
if (ifr->ifr_hwaddr.sa_family != dev->type)
return -EINVAL;
memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data,
- min(sizeof(ifr->ifr_hwaddr.sa_data),
+ min(sizeof(ifr->ifr_hwaddr.sa_data_min),
(size_t)dev->addr_len));
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
return 0;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 1052cbcdd3c8d..6cc054dd53b6e 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3252,7 +3252,7 @@ static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr,
int addr_len)
{
struct sock *sk = sock->sk;
- char name[sizeof(uaddr->sa_data) + 1];
+ char name[sizeof(uaddr->sa_data_min) + 1];
/*
* Check legality
@@ -3263,8 +3263,8 @@ static int packet_bind_spkt(struct socket *sock, struct sockaddr *uaddr,
/* uaddr->sa_data comes from the userspace, it's not guaranteed to be
* zero-terminated.
*/
- memcpy(name, uaddr->sa_data, sizeof(uaddr->sa_data));
- name[sizeof(uaddr->sa_data)] = 0;
+ memcpy(name, uaddr->sa_data, sizeof(uaddr->sa_data_min));
+ name[sizeof(uaddr->sa_data_min)] = 0;
return packet_do_bind(sk, name, 0, 0);
}
@@ -3536,11 +3536,11 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr,
return -EOPNOTSUPP;
uaddr->sa_family = AF_PACKET;
- memset(uaddr->sa_data, 0, sizeof(uaddr->sa_data));
+ memset(uaddr->sa_data, 0, sizeof(uaddr->sa_data_min));
rcu_read_lock();
dev = dev_get_by_index_rcu(sock_net(sk), READ_ONCE(pkt_sk(sk)->ifindex));
if (dev)
- strscpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data));
+ strscpy(uaddr->sa_data, dev->name, sizeof(uaddr->sa_data_min));
rcu_read_unlock();
return sizeof(*uaddr);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 111/122] s390: use the correct count for __iowrite64_copy()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 110/122] net: dev: Convert sa_data to flexible array in struct sockaddr Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 112/122] tls: rx: jump to a more appropriate label Greg Kroah-Hartman
` (16 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Niklas Schnelle, Jason Gunthorpe,
Heiko Carstens, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <jgg@nvidia.com>
[ Upstream commit 723a2cc8d69d4342b47dfddbfe6c19f1b135f09b ]
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()
Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn")
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/s390/pci/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 74799439b2598..beecc36c30276 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -225,7 +225,7 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
/* combine single writes by using store-block insn */
void __iowrite64_copy(void __iomem *to, const void *from, size_t count)
{
- zpci_memcpy_toio(to, from, count);
+ zpci_memcpy_toio(to, from, count * 8);
}
static void __iomem *__ioremap(phys_addr_t addr, size_t size, pgprot_t prot)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 112/122] tls: rx: jump to a more appropriate label
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 111/122] s390: use the correct count for __iowrite64_copy() Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 113/122] tls: rx: drop pointless else after goto Greg Kroah-Hartman
` (15 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jakub Kicinski, David S. Miller,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit bfc06e1aaa130b86a81ce3c41ec71a2f5e191690 ]
'recv_end:' checks num_async and decrypted, and is then followed
by the 'end' label. Since we know that decrypted and num_async
are 0 at the start we can jump to 'end'.
Move the init of decrypted and num_async to let the compiler
catch if I'm wrong.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fdfbaec5923d ("tls: stop recv() if initial process_rx_list gave us non-DATA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_sw.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index dd980438f201f..d11094a81ee6c 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -1754,6 +1754,7 @@ int tls_sw_recvmsg(struct sock *sk,
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
struct tls_prot_info *prot = &tls_ctx->prot_info;
struct sk_psock *psock;
+ int num_async, pending;
unsigned char control = 0;
ssize_t decrypted = 0;
struct strp_msg *rxm;
@@ -1766,8 +1767,6 @@ int tls_sw_recvmsg(struct sock *sk,
bool is_kvec = iov_iter_is_kvec(&msg->msg_iter);
bool is_peek = flags & MSG_PEEK;
bool bpf_strp_enabled;
- int num_async = 0;
- int pending;
flags |= nonblock;
@@ -1789,12 +1788,14 @@ int tls_sw_recvmsg(struct sock *sk,
}
if (len <= copied)
- goto recv_end;
+ goto end;
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
len = len - copied;
timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
+ decrypted = 0;
+ num_async = 0;
while (len && (decrypted + copied < target || ctx->recv_pkt)) {
bool retain_skb = false;
bool zc = false;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 113/122] tls: rx: drop pointless else after goto
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 112/122] tls: rx: jump to a more appropriate label Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 114/122] tls: stop recv() if initial process_rx_list gave us non-DATA Greg Kroah-Hartman
` (14 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jakub Kicinski, David S. Miller,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski <kuba@kernel.org>
[ Upstream commit d5123edd10cf9d324fcb88e276bdc7375f3c5321 ]
Pointless else branch after goto makes the code harder to refactor
down the line.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fdfbaec5923d ("tls: stop recv() if initial process_rx_list gave us non-DATA")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_sw.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index d11094a81ee6c..732f96b7bafc8 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -1783,10 +1783,9 @@ int tls_sw_recvmsg(struct sock *sk,
if (err < 0) {
tls_err_abort(sk, err);
goto end;
- } else {
- copied = err;
}
+ copied = err;
if (len <= copied)
goto end;
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 114/122] tls: stop recv() if initial process_rx_list gave us non-DATA
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 113/122] tls: rx: drop pointless else after goto Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 115/122] netfilter: nf_tables: set dormant flag on hook register failure Greg Kroah-Hartman
` (13 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sabrina Dubroca, Jakub Kicinski,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <sd@queasysnail.net>
[ Upstream commit fdfbaec5923d9359698cbb286bc0deadbb717504 ]
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_sw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index 732f96b7bafc8..46f1c19f7c60b 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -1786,7 +1786,7 @@ int tls_sw_recvmsg(struct sock *sk,
}
copied = err;
- if (len <= copied)
+ if (len <= copied || (copied && control != TLS_RECORD_TYPE_DATA))
goto end;
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 115/122] netfilter: nf_tables: set dormant flag on hook register failure
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 114/122] tls: stop recv() if initial process_rx_list gave us non-DATA Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 116/122] drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3 Greg Kroah-Hartman
` (12 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Florian Westphal, Pablo Neira Ayuso,
Sasha Levin, syzbot+de4025c006ec68ac56fc
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <fw@strlen.de>
[ Upstream commit bccebf64701735533c8db37773eeacc6566cc8ec ]
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.
Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_tables_api.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index f586e8b3c6cfa..73b0a6925304c 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1132,6 +1132,7 @@ static int nf_tables_updtable(struct nft_ctx *ctx)
return 0;
err_register_hooks:
+ ctx->table->flags |= NFT_TABLE_F_DORMANT;
nft_trans_destroy(trans);
return ret;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 116/122] drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 115/122] netfilter: nf_tables: set dormant flag on hook register failure Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 117/122] drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set Greg Kroah-Hartman
` (11 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian König, Daniel Vetter,
Peter Zijlstra (Intel), Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian König <christian.koenig@amd.com>
[ Upstream commit 7621350c6bb20fb6ab7eb988833ab96eac3dcbef ]
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT can't be used when we hold locks
since we are basically waiting for userspace to do something.
Holding a lock while doing so can trivial deadlock with page faults
etc...
So make lockdep complain when a driver tries to do this.
v2: Add lockdep_assert_none_held() macro.
v3: Add might_sleep() and also use lockdep_assert_none_held() in the
IOCTL path.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patchwork.freedesktop.org/patch/414944/
Stable-dep-of: 3c43177ffb54 ("drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_syncobj.c | 12 ++++++++++++
include/linux/lockdep.h | 5 +++++
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c
index 738e60139db90..4c3c8f8da0215 100644
--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -387,6 +387,15 @@ int drm_syncobj_find_fence(struct drm_file *file_private,
if (!syncobj)
return -ENOENT;
+ /* Waiting for userspace with locks help is illegal cause that can
+ * trivial deadlock with page faults for example. Make lockdep complain
+ * about it early on.
+ */
+ if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT) {
+ might_sleep();
+ lockdep_assert_none_held_once();
+ }
+
*fence = drm_syncobj_fence_get(syncobj);
if (*fence) {
@@ -951,6 +960,9 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs,
uint64_t *points;
uint32_t signaled_count, i;
+ if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT)
+ lockdep_assert_none_held_once();
+
points = kmalloc_array(count, sizeof(*points), GFP_KERNEL);
if (points == NULL)
return -ENOMEM;
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index 2c2586312b447..3eca9f91b9a56 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -321,6 +321,10 @@ extern void lock_unpin_lock(struct lockdep_map *lock, struct pin_cookie);
WARN_ON_ONCE(debug_locks && !lockdep_is_held(l)); \
} while (0)
+#define lockdep_assert_none_held_once() do { \
+ WARN_ON_ONCE(debug_locks && current->lockdep_depth); \
+ } while (0)
+
#define lockdep_recursing(tsk) ((tsk)->lockdep_recursion)
#define lockdep_pin_lock(l) lock_pin_lock(&(l)->dep_map)
@@ -394,6 +398,7 @@ static inline void lockdep_unregister_key(struct lock_class_key *key)
#define lockdep_assert_held_write(l) do { (void)(l); } while (0)
#define lockdep_assert_held_read(l) do { (void)(l); } while (0)
#define lockdep_assert_held_once(l) do { (void)(l); } while (0)
+#define lockdep_assert_none_held_once() do { } while (0)
#define lockdep_recursing(tsk) (0)
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 117/122] drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 116/122] drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3 Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 118/122] drm/amd/display: Fix memory leak in dm_sw_fini() Greg Kroah-Hartman
` (10 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Erik Kurzinger, Simon Ser,
Daniel Vetter, Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Kurzinger <ekurzinger@nvidia.com>
[ Upstream commit 3c43177ffb54ea5be97505eb8e2690e99ac96bc9 ]
When waiting for a syncobj timeline point whose fence has not yet been
submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using
drm_syncobj_fence_add_wait and the thread is put to sleep until the
timeout expires. If the fence is submitted before then,
drm_syncobj_add_point will wake up the sleeping thread immediately which
will proceed to wait for the fence to be signaled.
However, if the WAIT_AVAILABLE flag is used instead,
drm_syncobj_fence_add_wait won't get called, meaning the waiting thread
will always sleep for the full timeout duration, even if the fence gets
submitted earlier. If it turns out that the fence *has* been submitted
by the time it eventually wakes up, it will still indicate to userspace
that the wait completed successfully (it won't return -ETIME), but it
will have taken much longer than it should have.
To fix this, we must call drm_syncobj_fence_add_wait if *either* the
WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only
difference being that with WAIT_FOR_SUBMIT we will also wait for the
fence to be signaled after it has been submitted while with
WAIT_AVAILABLE we will return immediately.
IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html
v1 -> v2: adjust lockdep_assert_none_held_once condition
(cherry picked from commit 8c44ea81634a4a337df70a32621a5f3791be23df)
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_syncobj.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c
index 4c3c8f8da0215..6ce446cc88780 100644
--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -960,7 +960,8 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs,
uint64_t *points;
uint32_t signaled_count, i;
- if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT)
+ if (flags & (DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT |
+ DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE))
lockdep_assert_none_held_once();
points = kmalloc_array(count, sizeof(*points), GFP_KERNEL);
@@ -1029,7 +1030,8 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs,
* fallthough and try a 0 timeout wait!
*/
- if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT) {
+ if (flags & (DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT |
+ DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE)) {
for (i = 0; i < count; ++i)
drm_syncobj_fence_add_wait(syncobjs[i], &entries[i]);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 118/122] drm/amd/display: Fix memory leak in dm_sw_fini()
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 117/122] drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set Greg Kroah-Hartman
@ 2024-02-27 13:27 ` Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 119/122] block: ataflop: more blk-mq refactoring fixes Greg Kroah-Hartman
` (9 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:27 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Armin Wolf, Alex Deucher,
Sasha Levin
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Armin Wolf <W_Armin@gmx.de>
[ Upstream commit bae67893578d608e35691dcdfa90c4957debf1d3 ]
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024):
comm "(udev-worker)", pid 222, jiffies 4294894636
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6265fd77):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
[<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
[<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
[<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
[<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
[<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
[<ffffffff996918a3>] pci_device_probe+0xc3/0x230
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 54d6b4128721e..3578e3b3536e3 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1456,6 +1456,7 @@ static int dm_sw_fini(void *handle)
if (adev->dm.dmub_srv) {
dmub_srv_destroy(adev->dm.dmub_srv);
+ kfree(adev->dm.dmub_srv);
adev->dm.dmub_srv = NULL;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 140+ messages in thread
* [PATCH 5.10 119/122] block: ataflop: more blk-mq refactoring fixes
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2024-02-27 13:27 ` [PATCH 5.10 118/122] drm/amd/display: Fix memory leak in dm_sw_fini() Greg Kroah-Hartman
@ 2024-02-27 13:28 ` Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 120/122] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio Greg Kroah-Hartman
` (8 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:28 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Schmitz, linux-block,
Jens Axboe
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Schmitz <schmitzmic@gmail.com>
commit d28e4dff085c5a87025c9a0a85fb798bd8e9ca17 upstream.
As it turns out, my earlier patch in commit 86d46fdaa12a (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.
Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).
Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.
Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.
After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95f (ataflop: convert to blk-mq)
CC: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[MSch: v5.10 backport merge conflict fix]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/ataflop.c | 42 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 5 deletions(-)
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -456,10 +456,20 @@ static DEFINE_TIMER(fd_timer, check_chan
static void fd_end_request_cur(blk_status_t err)
{
+ DPRINT(("fd_end_request_cur(), bytes %d of %d\n",
+ blk_rq_cur_bytes(fd_request),
+ blk_rq_bytes(fd_request)));
+
if (!blk_update_request(fd_request, err,
blk_rq_cur_bytes(fd_request))) {
+ DPRINT(("calling __blk_mq_end_request()\n"));
__blk_mq_end_request(fd_request, err);
fd_request = NULL;
+ } else {
+ /* requeue rest of request */
+ DPRINT(("calling blk_mq_requeue_request()\n"));
+ blk_mq_requeue_request(fd_request, true);
+ fd_request = NULL;
}
}
@@ -697,12 +707,21 @@ static void fd_error( void )
if (fd_request->error_count >= MAX_ERRORS) {
printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
fd_end_request_cur(BLK_STS_IOERR);
+ finish_fdc();
+ return;
}
else if (fd_request->error_count == RECALIBRATE_ERRORS) {
printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
if (SelectedDrive != -1)
SUD.track = -1;
}
+ /* need to re-run request to recalibrate */
+ atari_disable_irq( IRQ_MFP_FDC );
+
+ setup_req_params( SelectedDrive );
+ do_fd_action( SelectedDrive );
+
+ atari_enable_irq( IRQ_MFP_FDC );
}
@@ -737,6 +756,7 @@ static int do_format(int drive, int type
if (type) {
if (--type >= NUM_DISK_MINORS ||
minor2disktype[type].drive_types > DriveType) {
+ finish_fdc();
ret = -EINVAL;
goto out;
}
@@ -745,6 +765,7 @@ static int do_format(int drive, int type
}
if (!UDT || desc->track >= UDT->blocks/UDT->spt/2 || desc->head >= 2) {
+ finish_fdc();
ret = -EINVAL;
goto out;
}
@@ -785,6 +806,7 @@ static int do_format(int drive, int type
wait_for_completion(&format_wait);
+ finish_fdc();
ret = FormatError ? -EIO : 0;
out:
blk_mq_unquiesce_queue(q);
@@ -819,6 +841,7 @@ static void do_fd_action( int drive )
else {
/* all sectors finished */
fd_end_request_cur(BLK_STS_OK);
+ finish_fdc();
return;
}
}
@@ -1222,8 +1245,8 @@ static void fd_rwsec_done1(int status)
}
else {
/* all sectors finished */
- finish_fdc();
fd_end_request_cur(BLK_STS_OK);
+ finish_fdc();
}
return;
@@ -1345,7 +1368,7 @@ static void fd_times_out(struct timer_li
static void finish_fdc( void )
{
- if (!NeedSeek) {
+ if (!NeedSeek || !stdma_is_locked_by(floppy_irq)) {
finish_fdc_done( 0 );
}
else {
@@ -1380,7 +1403,8 @@ static void finish_fdc_done( int dummy )
start_motor_off_timer();
local_irq_save(flags);
- stdma_release();
+ if (stdma_is_locked_by(floppy_irq))
+ stdma_release();
local_irq_restore(flags);
DPRINT(("finish_fdc() finished\n"));
@@ -1477,7 +1501,9 @@ static blk_status_t ataflop_queue_rq(str
int drive = floppy - unit;
int type = floppy->type;
- DPRINT(("Queue request: drive %d type %d last %d\n", drive, type, bd->last));
+ DPRINT(("Queue request: drive %d type %d sectors %d of %d last %d\n",
+ drive, type, blk_rq_cur_sectors(bd->rq),
+ blk_rq_sectors(bd->rq), bd->last));
spin_lock_irq(&ataflop_lock);
if (fd_request) {
@@ -1499,6 +1525,7 @@ static blk_status_t ataflop_queue_rq(str
/* drive not connected */
printk(KERN_ERR "Unknown Device: fd%d\n", drive );
fd_end_request_cur(BLK_STS_IOERR);
+ stdma_release();
goto out;
}
@@ -1515,11 +1542,13 @@ static blk_status_t ataflop_queue_rq(str
if (--type >= NUM_DISK_MINORS) {
printk(KERN_WARNING "fd%d: invalid disk format", drive );
fd_end_request_cur(BLK_STS_IOERR);
+ stdma_release();
goto out;
}
if (minor2disktype[type].drive_types > DriveType) {
printk(KERN_WARNING "fd%d: unsupported disk format", drive );
fd_end_request_cur(BLK_STS_IOERR);
+ stdma_release();
goto out;
}
type = minor2disktype[type].index;
@@ -1620,6 +1649,7 @@ static int fd_locked_ioctl(struct block_
/* what if type > 0 here? Overwrite specified entry ? */
if (type) {
/* refuse to re-set a predefined type for now */
+ finish_fdc();
return -EINVAL;
}
@@ -1687,8 +1717,10 @@ static int fd_locked_ioctl(struct block_
/* sanity check */
if (setprm.track != dtp->blocks/dtp->spt/2 ||
- setprm.head != 2)
+ setprm.head != 2) {
+ finish_fdc();
return -EINVAL;
+ }
UDT = dtp;
set_capacity(floppy->disk, UDT->blocks);
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 120/122] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2024-02-27 13:28 ` [PATCH 5.10 119/122] block: ataflop: more blk-mq refactoring fixes Greg Kroah-Hartman
@ 2024-02-27 13:28 ` Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 121/122] arp: Prevent overflow in arp_req_get() Greg Kroah-Hartman
` (7 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:28 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jens Axboe, Christoph Hellwig,
Avi Kivity, Sandeep Dhavale, Kent Overstreet, Bart Van Assche,
Christian Brauner
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <bvanassche@acm.org>
commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream.
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:
WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
kiocb_set_cancel_fn+0x9c/0xa8
ffs_epfile_read_iter+0x144/0x1d0
io_read+0x19c/0x498
io_issue_sqe+0x118/0x27c
io_submit_sqes+0x25c/0x5fc
__arm64_sys_io_uring_enter+0x104/0xab0
invoke_syscall+0x58/0x11c
el0_svc_common+0xb4/0xf4
do_el0_svc+0x2c/0xb0
el0_svc+0x2c/0xa4
el0t_64_sync_handler+0x68/0xb4
el0t_64_sync+0x1a4/0x1a8
Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is
submitted by libaio.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/aio.c | 9 ++++++++-
include/linux/fs.h | 2 ++
2 files changed, 10 insertions(+), 1 deletion(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -569,6 +569,13 @@ void kiocb_set_cancel_fn(struct kiocb *i
struct kioctx *ctx = req->ki_ctx;
unsigned long flags;
+ /*
+ * kiocb didn't come from aio or is neither a read nor a write, hence
+ * ignore it.
+ */
+ if (!(iocb->ki_flags & IOCB_AIO_RW))
+ return;
+
if (WARN_ON_ONCE(!list_empty(&req->ki_list)))
return;
@@ -1454,7 +1461,7 @@ static int aio_prep_rw(struct kiocb *req
req->ki_complete = aio_complete_rw;
req->private = NULL;
req->ki_pos = iocb->aio_offset;
- req->ki_flags = iocb_flags(req->ki_filp);
+ req->ki_flags = iocb_flags(req->ki_filp) | IOCB_AIO_RW;
if (iocb->aio_flags & IOCB_FLAG_RESFD)
req->ki_flags |= IOCB_EVENTFD;
req->ki_hint = ki_hint_validate(file_write_hint(req->ki_filp));
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -316,6 +316,8 @@ enum rw_hint {
/* iocb->ki_waitq is valid */
#define IOCB_WAITQ (1 << 19)
#define IOCB_NOIO (1 << 20)
+/* kiocb is a read or write operation submitted by fs/aio.c. */
+#define IOCB_AIO_RW (1 << 23)
struct kiocb {
struct file *ki_filp;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 121/122] arp: Prevent overflow in arp_req_get().
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2024-02-27 13:28 ` [PATCH 5.10 120/122] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio Greg Kroah-Hartman
@ 2024-02-27 13:28 ` Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 122/122] ext4: regenerate buddy after block freeing failed if under fc replay Greg Kroah-Hartman
` (6 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:28 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzkaller, Bjoern Doebel,
Kuniyuki Iwashima, Paolo Abeni
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima <kuniyu@amazon.com>
commit a7d6027790acea24446ddd6632d394096c0f4667 upstream.
syzkaller reported an overflown write in arp_req_get(). [0]
When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour
entry and copies neigh->ha to struct arpreq.arp_ha.sa_data.
The arp_ha here is struct sockaddr, not struct sockaddr_storage, so
the sa_data buffer is just 14 bytes.
In the splat below, 2 bytes are overflown to the next int field,
arp_flags. We initialise the field just after the memcpy(), so it's
not a problem.
However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN),
arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL)
in arp_ioctl() before calling arp_req_get().
To avoid the overflow, let's limit the max length of memcpy().
Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible
array in struct sockaddr") just silenced syzkaller.
[0]:
memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14)
WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128
Modules linked in:
CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014
RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128
Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6
RSP: 0018:ffffc900050b7998 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001
RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000
R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010
FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261
inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981
sock_do_ioctl+0xdf/0x260 net/socket.c:1204
sock_ioctl+0x3ef/0x650 net/socket.c:1321
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x64/0xce
RIP: 0033:0x7f172b262b8d
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d
RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003
RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Bjoern Doebel <doebel@amazon.de>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240215230516.31330-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/arp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1104,7 +1104,8 @@ static int arp_req_get(struct arpreq *r,
if (neigh) {
if (!(neigh->nud_state & NUD_NOARP)) {
read_lock_bh(&neigh->lock);
- memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
+ memcpy(r->arp_ha.sa_data, neigh->ha,
+ min(dev->addr_len, sizeof(r->arp_ha.sa_data_min)));
r->arp_flags = arp_state_to_flags(neigh);
read_unlock_bh(&neigh->lock);
r->arp_ha.sa_family = dev->type;
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH 5.10 122/122] ext4: regenerate buddy after block freeing failed if under fc replay
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2024-02-27 13:28 ` [PATCH 5.10 121/122] arp: Prevent overflow in arp_req_get() Greg Kroah-Hartman
@ 2024-02-27 13:28 ` Greg Kroah-Hartman
2024-02-27 18:28 ` [PATCH 5.10 000/122] 5.10.211-rc1 review Pavel Machek
` (5 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-27 13:28 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jan Kara, Baokun Li, Theodore Tso
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <libaokun1@huawei.com>
commit c9b528c35795b711331ed36dc3dbee90d5812d4e upstream.
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case.
Reported-by: Jan Kara <jack@suse.cz>
Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ext4/mballoc.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -823,6 +823,24 @@ void ext4_mb_generate_buddy(struct super
atomic64_add(period, &sbi->s_mb_generation_time);
}
+static void mb_regenerate_buddy(struct ext4_buddy *e4b)
+{
+ int count;
+ int order = 1;
+ void *buddy;
+
+ while ((buddy = mb_find_buddy(e4b, order++, &count)))
+ ext4_set_bits(buddy, 0, count);
+
+ e4b->bd_info->bb_fragments = 0;
+ memset(e4b->bd_info->bb_counters, 0,
+ sizeof(*e4b->bd_info->bb_counters) *
+ (e4b->bd_sb->s_blocksize_bits + 2));
+
+ ext4_mb_generate_buddy(e4b->bd_sb, e4b->bd_buddy,
+ e4b->bd_bitmap, e4b->bd_group, e4b->bd_info);
+}
+
/* The buddy information is attached the buddy cache inode
* for convenience. The information regarding each group
* is loaded via ext4_mb_load_buddy. The information involve
@@ -1505,6 +1523,8 @@ static void mb_free_blocks(struct inode
ext4_mark_group_bitmap_corrupted(
sb, e4b->bd_group,
EXT4_GROUP_INFO_BBITMAP_CORRUPT);
+ } else {
+ mb_regenerate_buddy(e4b);
}
goto done;
}
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2024-02-27 13:28 ` [PATCH 5.10 122/122] ext4: regenerate buddy after block freeing failed if under fc replay Greg Kroah-Hartman
@ 2024-02-27 18:28 ` Pavel Machek
2024-02-27 18:56 ` Daniel Díaz
` (4 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Pavel Machek @ 2024-02-27 18:28 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
[-- Attachment #1: Type: text/plain, Size: 664 bytes --]
Hi!
> This is the start of the stable review cycle for the 5.10.211 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2024-02-27 18:28 ` [PATCH 5.10 000/122] 5.10.211-rc1 review Pavel Machek
@ 2024-02-27 18:56 ` Daniel Díaz
2024-02-27 18:56 ` Florian Fainelli
2024-02-28 6:03 ` Greg Kroah-Hartman
2024-02-27 18:58 ` Florian Fainelli
` (3 subsequent siblings)
127 siblings, 2 replies; 140+ messages in thread
From: Daniel Díaz @ 2024-02-27 18:56 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, conor, allen.lkml, kuniyu
Hello!
On 27/02/24 7:26 a. m., Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.211 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
We're seeing new warnings on 32-bits architectures: Arm, i386, PowerPC, RISC-V and System/390:
-----8<-----
builds/linux/net/ipv4/arp.c: In function 'arp_req_get':
/builds/linux/include/linux/minmax.h:20:35: warning: comparison of distinct pointer types lacks a cast
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
/builds/linux/include/linux/minmax.h:26:18: note: in expansion of macro '__typecheck'
26 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
/builds/linux/include/linux/minmax.h:36:31: note: in expansion of macro '__safe_cmp'
36 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
/builds/linux/include/linux/minmax.h:45:25: note: in expansion of macro '__careful_cmp'
45 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
/builds/linux/net/ipv4/arp.c:1108:32: note: in expansion of macro 'min'
1108 | min(dev->addr_len, sizeof(r->arp_ha.sa_data_min)));
| ^~~
----->8-----
Bisection points to:
commit 5a2d57992eca13530ac79ae287243b3ff6b01128
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Thu Feb 15 15:05:16 2024 -0800
arp: Prevent overflow in arp_req_get().
commit a7d6027790acea24446ddd6632d394096c0f4667 upstream.
Tuxmake reproducers:
tuxmake --runtime podman --target-arch arm --toolchain gcc-12 --kconfig davinci_all_defconfig
tuxmake --runtime podman --target-arch i386 --toolchain gcc-12 --kconfig defconfig
tuxmake --runtime podman --target-arch powerpc --toolchain gcc-12 --kconfig maple_defconfig
tuxmake --runtime podman --target-arch riscv --toolchain gcc-12 --kconfig defconfig
Reverting the change made the build pass again without warnings.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Greetings!
Daniel Díaz
daniel.diaz@linaro.org
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 18:56 ` Daniel Díaz
@ 2024-02-27 18:56 ` Florian Fainelli
2024-02-28 6:03 ` Greg Kroah-Hartman
1 sibling, 0 replies; 140+ messages in thread
From: Florian Fainelli @ 2024-02-27 18:56 UTC (permalink / raw)
To: Daniel Díaz, Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, sudipm.mukherjee, srw, rwarsow,
conor, allen.lkml, kuniyu
On 2/27/24 10:56, Daniel Díaz wrote:
> Hello!
>
> On 27/02/24 7:26 a. m., Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.10.211 release.
>> There are 122 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
>> or in the git tree and branch at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>
> We're seeing new warnings on 32-bits architectures: Arm, i386, PowerPC,
> RISC-V and System/390:
Seeing the same thing here.
--
Florian
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2024-02-27 18:56 ` Daniel Díaz
@ 2024-02-27 18:58 ` Florian Fainelli
2024-02-27 23:59 ` Dominique Martinet
` (2 subsequent siblings)
127 siblings, 0 replies; 140+ messages in thread
From: Florian Fainelli @ 2024-02-27 18:58 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, sudipm.mukherjee, srw, rwarsow,
conor, allen.lkml
On 2/27/24 05:26, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.211 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Same warning as what Daniel reported for ARM 32-bit:
In file included from ./include/linux/kernel.h:15,
from ./include/linux/list.h:9,
from ./include/linux/module.h:12,
from net/ipv4/arp.c:74:
net/ipv4/arp.c: In function 'arp_req_get':
./include/linux/minmax.h:20:35: warning: comparison of distinct pointer
types lacks a cast
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
./include/linux/minmax.h:26:18: note: in expansion of macro '__typecheck'
26 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
./include/linux/minmax.h:36:31: note: in expansion of macro '__safe_cmp'
36 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
./include/linux/minmax.h:45:25: note: in expansion of macro '__careful_cmp'
45 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
net/ipv4/arp.c:1108:32: note: in expansion of macro 'min'
1108 | min(dev->addr_len,
sizeof(r->arp_ha.sa_data_min)));
| ^~~
--
Florian
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2024-02-27 18:58 ` Florian Fainelli
@ 2024-02-27 23:59 ` Dominique Martinet
2024-02-28 6:06 ` Greg Kroah-Hartman
2024-02-28 13:42 ` Jon Hunter
2024-02-29 10:56 ` Shreeya Patel
127 siblings, 1 reply; 140+ messages in thread
From: Dominique Martinet @ 2024-02-27 23:59 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
Greg Kroah-Hartman wrote on Tue, Feb 27, 2024 at 02:26:01PM +0100:
> Kees Cook <keescook@chromium.org>
> net: dev: Convert sa_data to flexible array in struct sockaddr
> (ca13c2b1e9e4b5d982c2f1e75f28b1586e5c0f7f in this tree,
> b5f0de6df6dce8d641ef58ef7012f3304dffb9a1 upstream)
This commit breaks build of some 3rd party wireless module we use here
(because sizeof(sa->sa_data) no longer works and needs to use
sa_data_min)
With that said I guess it really is a dependency on the arp_req_get
overflow, so probably necessary evil, and I don't think we explicitly
pretend to preserve APIs for 3rd party modules so this is probably
fine... The new warnings that poped up (and were reported in other
messages) a probably worth checking though.
That aside no particular problem actually running this, so--
Tested 5d69d611e74d ("Linux 5.10.211-rc1") on:
- arm i.MX6ULL (Armadillo 640)
- arm64 i.MX8MP (Armadillo G4)
No obvious regression in dmesg or basic tests:
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
--
Dominique Martinet | Asmadeus
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 18:56 ` Daniel Díaz
2024-02-27 18:56 ` Florian Fainelli
@ 2024-02-28 6:03 ` Greg Kroah-Hartman
1 sibling, 0 replies; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-28 6:03 UTC (permalink / raw)
To: Daniel Díaz
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, kuniyu
On Tue, Feb 27, 2024 at 12:56:00PM -0600, Daniel Díaz wrote:
> Hello!
>
> On 27/02/24 7:26 a. m., Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.211 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> We're seeing new warnings on 32-bits architectures: Arm, i386, PowerPC, RISC-V and System/390:
>
> -----8<-----
> builds/linux/net/ipv4/arp.c: In function 'arp_req_get':
> /builds/linux/include/linux/minmax.h:20:35: warning: comparison of distinct pointer types lacks a cast
> 20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
> | ^~
> /builds/linux/include/linux/minmax.h:26:18: note: in expansion of macro '__typecheck'
> 26 | (__typecheck(x, y) && __no_side_effects(x, y))
> | ^~~~~~~~~~~
> /builds/linux/include/linux/minmax.h:36:31: note: in expansion of macro '__safe_cmp'
> 36 | __builtin_choose_expr(__safe_cmp(x, y), \
> | ^~~~~~~~~~
> /builds/linux/include/linux/minmax.h:45:25: note: in expansion of macro '__careful_cmp'
> 45 | #define min(x, y) __careful_cmp(x, y, <)
> | ^~~~~~~~~~~~~
> /builds/linux/net/ipv4/arp.c:1108:32: note: in expansion of macro 'min'
> 1108 | min(dev->addr_len, sizeof(r->arp_ha.sa_data_min)));
> | ^~~
> ----->8-----
>
> Bisection points to:
>
> commit 5a2d57992eca13530ac79ae287243b3ff6b01128
> Author: Kuniyuki Iwashima <kuniyu@amazon.com>
> Date: Thu Feb 15 15:05:16 2024 -0800
>
> arp: Prevent overflow in arp_req_get().
> commit a7d6027790acea24446ddd6632d394096c0f4667 upstream.
Ugh, I fixed this up for 5.15, but forgot to do so for older kernels, my
fault. I'll go update it now.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 23:59 ` Dominique Martinet
@ 2024-02-28 6:06 ` Greg Kroah-Hartman
2024-02-28 20:39 ` Kees Cook
0 siblings, 1 reply; 140+ messages in thread
From: Greg Kroah-Hartman @ 2024-02-28 6:06 UTC (permalink / raw)
To: Dominique Martinet
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
On Wed, Feb 28, 2024 at 08:59:36AM +0900, Dominique Martinet wrote:
> Greg Kroah-Hartman wrote on Tue, Feb 27, 2024 at 02:26:01PM +0100:
> > Kees Cook <keescook@chromium.org>
> > net: dev: Convert sa_data to flexible array in struct sockaddr
> > (ca13c2b1e9e4b5d982c2f1e75f28b1586e5c0f7f in this tree,
> > b5f0de6df6dce8d641ef58ef7012f3304dffb9a1 upstream)
>
> This commit breaks build of some 3rd party wireless module we use here
> (because sizeof(sa->sa_data) no longer works and needs to use
> sa_data_min)
> With that said I guess it really is a dependency on the arp_req_get
> overflow, so probably necessary evil, and I don't think we explicitly
> pretend to preserve APIs for 3rd party modules so this is probably
> fine... The new warnings that poped up (and were reported in other
> messages) a probably worth checking though.
We NEVER preserve in-kernel APIs for any out-of-tree code as obviously,
we have no idea what out-of-tree code is actually using, so it would be
impossible to do so.
Also, it's odd that a driver is hit by this as no in-kernel driver was,
so perhaps it's using the wrong api to start with :)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2024-02-27 23:59 ` Dominique Martinet
@ 2024-02-28 13:42 ` Jon Hunter
2024-02-29 10:56 ` Shreeya Patel
127 siblings, 0 replies; 140+ messages in thread
From: Jon Hunter @ 2024-02-28 13:42 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, linux-tegra,
stable
On Tue, 27 Feb 2024 14:26:01 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.211 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.10:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
68 tests: 68 pass, 0 fail
Linux version: 5.10.211-rc1-g5d69d611e74d
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-28 6:06 ` Greg Kroah-Hartman
@ 2024-02-28 20:39 ` Kees Cook
2024-02-29 2:22 ` Dominique Martinet
0 siblings, 1 reply; 140+ messages in thread
From: Kees Cook @ 2024-02-28 20:39 UTC (permalink / raw)
To: Dominique Martinet
Cc: Greg Kroah-Hartman, stable, patches, linux-kernel, torvalds, akpm,
linux, shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
On Wed, Feb 28, 2024 at 07:06:38AM +0100, Greg Kroah-Hartman wrote:
> On Wed, Feb 28, 2024 at 08:59:36AM +0900, Dominique Martinet wrote:
> > Greg Kroah-Hartman wrote on Tue, Feb 27, 2024 at 02:26:01PM +0100:
> > > Kees Cook <keescook@chromium.org>
> > > net: dev: Convert sa_data to flexible array in struct sockaddr
> > > (ca13c2b1e9e4b5d982c2f1e75f28b1586e5c0f7f in this tree,
> > > b5f0de6df6dce8d641ef58ef7012f3304dffb9a1 upstream)
> >
> > This commit breaks build of some 3rd party wireless module we use here
> > (because sizeof(sa->sa_data) no longer works and needs to use
> > sa_data_min)
Just FYI, it's possible that things using sizeof(sa->sa_data) were buggy
to begin with since the struct size isn't actually dictated by that size
(it's only the minimum possible size).
> > With that said I guess it really is a dependency on the arp_req_get
> > overflow, so probably necessary evil, and I don't think we explicitly
> > pretend to preserve APIs for 3rd party modules so this is probably
> > fine... The new warnings that poped up (and were reported in other
> > messages) a probably worth checking though.
>
> We NEVER preserve in-kernel APIs for any out-of-tree code as obviously,
> we have no idea what out-of-tree code is actually using, so it would be
> impossible to do so.
>
> Also, it's odd that a driver is hit by this as no in-kernel driver was,
> so perhaps it's using the wrong api to start with :)
The reason is that most drivers don't want this size (see above) and
all the in-tree code that did need adjustment got adjusted (visible in
the referenced patch). :) But that's the risk of an out-of-tree driver:
it doesn't get those fixes automatically.
Out of curiosity, which drivers broke and what's needed to get them into
upstream (or at least staging)?
-Kees
--
Kees Cook
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-28 20:39 ` Kees Cook
@ 2024-02-29 2:22 ` Dominique Martinet
0 siblings, 0 replies; 140+ messages in thread
From: Dominique Martinet @ 2024-02-29 2:22 UTC (permalink / raw)
To: Kees Cook
Cc: Greg Kroah-Hartman, stable, patches, linux-kernel, torvalds, akpm,
linux, shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
Kees Cook wrote on Wed, Feb 28, 2024 at 12:39:42PM -0800:
> > > This commit breaks build of some 3rd party wireless module we use here
> > > (because sizeof(sa->sa_data) no longer works and needs to use
> > > sa_data_min)
>
> Just FYI, it's possible that things using sizeof(sa->sa_data) were buggy
> to begin with since the struct size isn't actually dictated by that size
> (it's only the minimum possible size).
Yes, I definitely agree with this.
As it's "vendor stuff" I just replaced with sa_data_min because that
preserves the values, but it ought to get a second look.
I'd love to pretend that driver's upstream will do the right thing and
use proper values here on newer kernel but upon checking its >6.2 tree
support now they apparently did the same instead of getting the size
properly.
> > We NEVER preserve in-kernel APIs for any out-of-tree code as obviously,
> > we have no idea what out-of-tree code is actually using, so it would be
> > impossible to do so.
Right, I just don't see much "common struct" changes in stable tree
patches -- stuff like livepatches or weak modules and whatsnot don't
like these so some downstreams (redhat to name them) try very hard to
keep these constants for the lifetime of a given stable release... iirc
they go as far as adding some padding fields to some structs that are
likely to need fiddling so they can do this while preserving binary
compatibility.
I understand the upstream stable kernels don't make such promise (and
given the amount of work that probably goes into it, rightfully so! I
wouldn't exect you or anyone to do this here), just pointed it out
as part of my usual test round for anyone else who'd care.
> Out of curiosity, which drivers broke and what's needed to get them into
> upstream (or at least staging)?
Sure, it was NXP's wifi chips driver:
https://github.com/nxp-imx/mwifiex/
It's mostly based on drivers/net/wireless/marvell/mwifiex but has since
been quite extensively modified, so it'd take quite a bit of effort to
upstream as a separate entity (changing a few names to avoid conflcts so
both can be built together... Add to that the requirement for a
compatible firmware with a restrictive license... And that NXP isn't
exactly focused on upstreaming); I have little hope of seeing it
upstream at this point unfortunately and gave up on it as part of
maintaining an embedded kernel "port" as it's sadly far from being
only one :/
(I especially don't get it as I consider maintaining a bunch of
spaghetti ifdef on kernel versions to be much more work than getting the
driver upstream once, but I guess I'm barking at the wrong tree here)
Thanks,
--
Dominique Martinet | Asmadeus
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 000/122] 5.10.211-rc1 review
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2024-02-28 13:42 ` Jon Hunter
@ 2024-02-29 10:56 ` Shreeya Patel
127 siblings, 0 replies; 140+ messages in thread
From: Shreeya Patel @ 2024-02-29 10:56 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml,
Gustavo Padovan, kernelci-regressions mailing list
On Tuesday, February 27, 2024 18:56 IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.211 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.211-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
KernelCI report for stable-rc/linux-5.10.y for this week.
## stable-rc HEAD for linux-5.10.y:
Date: 2024-02-27
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/log/?h=5d69d611e74dd9f58af23f171ccd3405a650c6ed
## Build failures:
No build failures seen for the stable-rc/linux-5.10.y commit head \o/
## Boot failures:
No **new** boot failures seen for the stable-rc/linux-5.10.y commit head \o/
Tested-by: kernelci.org bot <bot@kernelci.org>
Thanks,
Shreeya Patel
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
2024-02-27 13:27 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Greg Kroah-Hartman
@ 2024-03-04 18:49 ` Omar Sandoval
2024-03-05 11:27 ` [PATCH for 5.10-stable] x86/paravirt: Fix build due to __text_gen_insn() backport Borislav Petkov
2024-03-18 10:17 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Emeric Brun
0 siblings, 2 replies; 140+ messages in thread
From: Omar Sandoval @ 2024-03-04 18:49 UTC (permalink / raw)
To: Greg Kroah-Hartman, Peter Zijlstra, Josh Poimboeuf,
Borislav Petkov
Cc: stable, patches, Peter Zijlstra (Intel), Josh Poimboeuf,
Borislav Petkov (AMD)
[-- Attachment #1: Type: text/plain, Size: 5120 bytes --]
On Tue, Feb 27, 2024 at 02:27:26PM +0100, Greg Kroah-Hartman wrote:
> 5.10-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Peter Zijlstra <peterz@infradead.org>
>
> Upstream commit: ba27d1a80871eb8dbeddf34ec7d396c149cbb8d7
>
> Less duplication is more better.
>
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
> Link: https://lore.kernel.org/r/20220308154317.697253958@infradead.org
> [ Keep struct branch. ]
> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> arch/x86/include/asm/text-patching.h | 20 ++++++++++++++------
> arch/x86/kernel/paravirt.c | 22 +++++-----------------
> 2 files changed, 19 insertions(+), 23 deletions(-)
>
> --- a/arch/x86/include/asm/text-patching.h
> +++ b/arch/x86/include/asm/text-patching.h
> @@ -96,32 +96,40 @@ union text_poke_insn {
> };
>
> static __always_inline
> -void *text_gen_insn(u8 opcode, const void *addr, const void *dest)
> +void __text_gen_insn(void *buf, u8 opcode, const void *addr, const void *dest, int size)
> {
> - static union text_poke_insn insn; /* per instance */
> - int size = text_opcode_size(opcode);
> + union text_poke_insn *insn = buf;
> +
> + BUG_ON(size < text_opcode_size(opcode));
>
> /*
> * Hide the addresses to avoid the compiler folding in constants when
> * referencing code, these can mess up annotations like
> * ANNOTATE_NOENDBR.
> */
> + OPTIMIZER_HIDE_VAR(insn);
> OPTIMIZER_HIDE_VAR(addr);
> OPTIMIZER_HIDE_VAR(dest);
>
> - insn.opcode = opcode;
> + insn->opcode = opcode;
>
> if (size > 1) {
> - insn.disp = (long)dest - (long)(addr + size);
> + insn->disp = (long)dest - (long)(addr + size);
> if (size == 2) {
> /*
> * Ensure that for JMP8 the displacement
> * actually fits the signed byte.
> */
> - BUG_ON((insn.disp >> 31) != (insn.disp >> 7));
> + BUG_ON((insn->disp >> 31) != (insn->disp >> 7));
> }
> }
> +}
>
> +static __always_inline
> +void *text_gen_insn(u8 opcode, const void *addr, const void *dest)
> +{
> + static union text_poke_insn insn; /* per instance */
> + __text_gen_insn(&insn, opcode, addr, dest, text_opcode_size(opcode));
> return &insn.text;
> }
>
> --- a/arch/x86/kernel/paravirt.c
> +++ b/arch/x86/kernel/paravirt.c
> @@ -55,28 +55,16 @@ void __init default_banner(void)
> static const unsigned char ud2a[] = { 0x0f, 0x0b };
>
> struct branch {
> - unsigned char opcode;
> - u32 delta;
> + unsigned char opcode;
> + u32 delta;
> } __attribute__((packed));
>
> static unsigned paravirt_patch_call(void *insn_buff, const void *target,
> unsigned long addr, unsigned len)
> {
> - const int call_len = 5;
> - struct branch *b = insn_buff;
> - unsigned long delta = (unsigned long)target - (addr+call_len);
> -
> - if (len < call_len) {
> - pr_warn("paravirt: Failed to patch indirect CALL at %ps\n", (void *)addr);
> - /* Kernel might not be viable if patching fails, bail out: */
> - BUG_ON(1);
> - }
> -
> - b->opcode = 0xe8; /* call */
> - b->delta = delta;
> - BUILD_BUG_ON(sizeof(*b) != call_len);
> -
> - return call_len;
> + __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
> + (void *)addr, target, CALL_INSN_SIZE);
> + return CALL_INSN_SIZE;
v5.10.211 is failing to build with the attached .config with the
following error:
/home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c: In function 'paravirt_patch_call':
/home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:65:9: error: implicit declaration of function '__text_gen_insn' [-Werror=implicit-function-declaration]
65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
| ^~~~~~~~~~~~~~~
/home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:65:36: error: 'CALL_INSN_OPCODE' undeclared (first use in this function)
65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
| ^~~~~~~~~~~~~~~~
/home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:65:36: note: each undeclared identifier is reported only once for each function it appears in
/home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:66:47: error: 'CALL_INSN_SIZE' undeclared (first use in this function)
66 | (void *)addr, target, CALL_INSN_SIZE);
| ^~~~~~~~~~~~~~
/home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:68:1: error: control reaches end of non-void function [-Werror=return-type]
68 | }
| ^
Newer versions include asm/text-patching.h through the include of
linux/static-call.h added by a0e2bf7cb700 ("x86/paravirt: Switch time
pvops functions to use static_call()"). This code is gone in mainline as
of commit f7af6977621a ("x86/paravirt: Remove no longer needed paravirt
patching code"). What's the preferred way to resolve this?
Thanks,
Omar
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 76567 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.10.211 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (GCC) 13.2.1 20231205 (Red Hat 13.2.1-6)"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130201
CONFIG_LD_VERSION=240000000
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24000
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# CONFIG_BPF_PRELOAD is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_KCMP is not set
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_X2APIC is not set
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
# CONFIG_MICROCODE_LATE_LOADING is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x0
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_RETPOLINE=y
CONFIG_RETHUNK=y
CONFIG_CPU_UNRET_ENTRY=y
CONFIG_CPU_IBPB_ENTRY=y
CONFIG_CPU_IBRS_ENTRY=y
CONFIG_CPU_SRSO=y
# CONFIG_SLS is not set
# CONFIG_GDS_FORCE_MITIGATION is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
# CONFIG_X86_X32 is not set
# end of Binary Emulations
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_READ_ONLY_THP_FOR_FS=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_I40E is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_TRACE_SINK is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_AMD_ENERGY is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_MADERA is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
#
# SPI RTC drivers
#
#
# SPI and I2C RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_DCDBAS is not set
# CONFIG_DELL_SMBIOS is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_SYSTEM76_ACPI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
# CONFIG_INTEL_TURBO_MAX_3 is not set
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_AMD_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
# CONFIG_LIBNVDIMM is not set
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FS_POSIX_ACL is not set
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
#
# Certificates for signature checking
#
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_XXHASH=m
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_XARRAY_MULTI=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_IRQ_POLL is not set
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_DEBUG_INFO_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 140+ messages in thread
* [PATCH for 5.10-stable] x86/paravirt: Fix build due to __text_gen_insn() backport
2024-03-04 18:49 ` Omar Sandoval
@ 2024-03-05 11:27 ` Borislav Petkov
2024-03-11 20:43 ` Omar Sandoval
2024-03-18 10:17 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Emeric Brun
1 sibling, 1 reply; 140+ messages in thread
From: Borislav Petkov @ 2024-03-05 11:27 UTC (permalink / raw)
To: Omar Sandoval
Cc: Greg Kroah-Hartman, Peter Zijlstra, Josh Poimboeuf, stable,
patches
On Mon, Mar 04, 2024 at 10:49:33AM -0800, Omar Sandoval wrote:
> v5.10.211 is failing to build with the attached .config with the
> following error:
Ok, let's try this:
---
From: "Borislav Petkov (AMD)" <bp@alien8.de>
The Link tag has all the details but basically due to missing upstream
commits, the header which contains __text_gen_insn() is not in the
includes in paravirt.c, leading to:
arch/x86/kernel/paravirt.c: In function 'paravirt_patch_call':
arch/x86/kernel/paravirt.c:65:9: error: implicit declaration of function '__text_gen_insn' \
[-Werror=implicit-function-declaration]
65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
| ^~~~~~~~~~~~~~~
Add the missing include.
Reported-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ZeYXvd1-rVkPGvvW@telecaster
---
arch/x86/kernel/paravirt.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 5bea8d93883a..f0e4ad8595ca 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -31,6 +31,7 @@
#include <asm/special_insns.h>
#include <asm/tlb.h>
#include <asm/io_bitmap.h>
+#include <asm/text-patching.h>
/*
* nop stub, which must not clobber anything *including the stack* to
--
2.43.0
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply related [flat|nested] 140+ messages in thread
* Re: [PATCH for 5.10-stable] x86/paravirt: Fix build due to __text_gen_insn() backport
2024-03-05 11:27 ` [PATCH for 5.10-stable] x86/paravirt: Fix build due to __text_gen_insn() backport Borislav Petkov
@ 2024-03-11 20:43 ` Omar Sandoval
0 siblings, 0 replies; 140+ messages in thread
From: Omar Sandoval @ 2024-03-11 20:43 UTC (permalink / raw)
To: Borislav Petkov
Cc: Greg Kroah-Hartman, Peter Zijlstra, Josh Poimboeuf, stable,
patches
On Tue, Mar 05, 2024 at 12:27:11PM +0100, Borislav Petkov wrote:
> On Mon, Mar 04, 2024 at 10:49:33AM -0800, Omar Sandoval wrote:
> > v5.10.211 is failing to build with the attached .config with the
> > following error:
>
> Ok, let's try this:
>
> ---
> From: "Borislav Petkov (AMD)" <bp@alien8.de>
>
> The Link tag has all the details but basically due to missing upstream
> commits, the header which contains __text_gen_insn() is not in the
> includes in paravirt.c, leading to:
>
> arch/x86/kernel/paravirt.c: In function 'paravirt_patch_call':
> arch/x86/kernel/paravirt.c:65:9: error: implicit declaration of function '__text_gen_insn' \
> [-Werror=implicit-function-declaration]
> 65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
> | ^~~~~~~~~~~~~~~
>
> Add the missing include.
>
> Reported-by: Omar Sandoval <osandov@osandov.com>
> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
> Link: https://lore.kernel.org/r/ZeYXvd1-rVkPGvvW@telecaster
> ---
> arch/x86/kernel/paravirt.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
> index 5bea8d93883a..f0e4ad8595ca 100644
> --- a/arch/x86/kernel/paravirt.c
> +++ b/arch/x86/kernel/paravirt.c
> @@ -31,6 +31,7 @@
> #include <asm/special_insns.h>
> #include <asm/tlb.h>
> #include <asm/io_bitmap.h>
> +#include <asm/text-patching.h>
>
> /*
> * nop stub, which must not clobber anything *including the stack* to
> --
> 2.43.0
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
Tested-by: Omar Sandoval <osandov@osandov.com>
Thanks!
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
2024-03-04 18:49 ` Omar Sandoval
2024-03-05 11:27 ` [PATCH for 5.10-stable] x86/paravirt: Fix build due to __text_gen_insn() backport Borislav Petkov
@ 2024-03-18 10:17 ` Emeric Brun
2024-03-18 14:20 ` Borislav Petkov
1 sibling, 1 reply; 140+ messages in thread
From: Emeric Brun @ 2024-03-18 10:17 UTC (permalink / raw)
To: Omar Sandoval, Greg Kroah-Hartman, Peter Zijlstra, Josh Poimboeuf,
Borislav Petkov
Cc: stable, patches
[-- Attachment #1: Type: text/plain, Size: 1699 bytes --]
Hi All,
> v5.10.211 is failing to build with the attached .config with the
> following error:
>
> /home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c: In function 'paravirt_patch_call':
> /home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:65:9: error: implicit declaration of function '__text_gen_insn' [-Werror=implicit-function-declaration]
> 65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
> | ^~~~~~~~~~~~~~~
> /home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:65:36: error: 'CALL_INSN_OPCODE' undeclared (first use in this function)
> 65 | __text_gen_insn(insn_buff, CALL_INSN_OPCODE,
> | ^~~~~~~~~~~~~~~~
> /home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:65:36: note: each undeclared identifier is reported only once for each function it appears in
> /home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:66:47: error: 'CALL_INSN_SIZE' undeclared (first use in this function)
> 66 | (void *)addr, target, CALL_INSN_SIZE);
> | ^~~~~~~~~~~~~~
> /home/runner/work/drgn/drgn/build/vmtest/linux.git/arch/x86/kernel/paravirt.c:68:1: error: control reaches end of non-void function [-Werror=return-type]
> 68 | }
> | ^
>
Exact same issue here, also since 5.10.211 and still present in 5.10.213.
A bisect shows the same commit:
[b253061d4b863f0e9ebf25a3cf0313501a5d51b4] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
I add the used config file in attachment.
Regards,
Emeric Brun
[-- Attachment #2: config.txt --]
[-- Type: text/plain, Size: 97871 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.10.213 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110400
CONFIG_LD_VERSION=238000000
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=16
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
CONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_KCMP is not set
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_PROFILING is not set
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_X2APIC is not set
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_AMD_MEM_ENCRYPT is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_X86_SMAP is not set
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_EFI is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
# CONFIG_SPECULATION_MITIGATIONS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_TINY_POWER_BUTTON=y
CONFIG_ACPI_TINY_POWER_BUTTON_SIGNAL=30
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_XEN=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_UNUSED_KSYMS_WHITELIST=""
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_FAST_GUP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_NV=y
CONFIG_TCP_CONG_SCALABLE=y
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_CT=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
# CONFIG_IP_SET is not set
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=19
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=10
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_MATCH_FRAG=m
# CONFIG_IP6_NF_MATCH_OPTS is not set
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
# CONFIG_NET_ACT_BPF is not set
CONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_PCI_HYPERV is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_VMD is not set
# CONFIG_PCI_HYPERV_INTERFACE is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_PARTITIONED_MASTER=y
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers
#
# NAND
#
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
#
# ECC engine support
#
# end of ECC engine support
# end of NAND
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers
# CONFIG_MTD_UBI is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_PVPANIC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=y
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=y
# CONFIG_IPVTAP is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_ARCNET is not set
#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=m
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=m
# CONFIG_FIXED_PHY is not set
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
CONFIG_MDIO_DEVRES=m
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_HYPERV_KEYBOARD=y
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_HVC_XEN is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_BA431 is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
CONFIG_NVRAM=y
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_KVM=y
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_XEN_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_XEN is not set
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_HYPERV_MOUSE is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=m
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IDXD is not set
CONFIG_INTEL_IOATDMA=y
# CONFIG_PLX_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
# CONFIG_SF_PDMA is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_TIMER=y
# CONFIG_HYPERV_BALLOON is not set
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
# CONFIG_XEN_DEV_EVTCHN is not set
# CONFIG_XEN_BACKEND is not set
# CONFIG_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not set
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=m
# CONFIG_XEN_MCE_LOG is not set
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_HAVE_VPMU=y
# end of Xen driver support
# CONFIG_GREYBUS is not set
CONFIG_STAGING=y
# CONFIG_COMEDI is not set
# CONFIG_RTS5208 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# end of Android
# CONFIG_LTE_GDM724X is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
#
# Gasket devices
#
# CONFIG_STAGING_GASKET_FRAMEWORK is not set
# end of Gasket devices
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
# CONFIG_LIBNVDIMM is not set
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_EXPORTFS=m
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_TMPFS_INODE64 is not set
# CONFIG_HUGETLBFS is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SQUASHFS_LZ4 is not set
# CONFIG_SQUASHFS_LZO is not set
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=y
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_HW is not set
#
# Certificates for signature checking
#
# end of Certificates for signature checking
#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_IRQ_POLL is not set
CONFIG_UCS2_STRING=m
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=4
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
2024-03-18 10:17 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Emeric Brun
@ 2024-03-18 14:20 ` Borislav Petkov
2024-03-20 16:03 ` Sasha Levin
0 siblings, 1 reply; 140+ messages in thread
From: Borislav Petkov @ 2024-03-18 14:20 UTC (permalink / raw)
To: Sasha Levin
Cc: Emeric Brun, Omar Sandoval, Greg Kroah-Hartman, Peter Zijlstra,
Josh Poimboeuf, stable, patches
On Mon, Mar 18, 2024 at 11:17:10AM +0100, Emeric Brun wrote:
> Exact same issue here, also since 5.10.211 and still present in 5.10.213.
Sasha,
can you pls pick up this one:
https://lore.kernel.org/r/20240305112711.GAZecBj5TMaQDSz6Ym@fat_crate.local
?
See upthread for what it fixes.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 140+ messages in thread
* Re: [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()
2024-03-18 14:20 ` Borislav Petkov
@ 2024-03-20 16:03 ` Sasha Levin
0 siblings, 0 replies; 140+ messages in thread
From: Sasha Levin @ 2024-03-20 16:03 UTC (permalink / raw)
To: Borislav Petkov
Cc: Emeric Brun, Omar Sandoval, Greg Kroah-Hartman, Peter Zijlstra,
Josh Poimboeuf, stable, patches
On Mon, Mar 18, 2024 at 03:20:14PM +0100, Borislav Petkov wrote:
>On Mon, Mar 18, 2024 at 11:17:10AM +0100, Emeric Brun wrote:
>> Exact same issue here, also since 5.10.211 and still present in 5.10.213.
>
>Sasha,
>
>can you pls pick up this one:
>
>https://lore.kernel.org/r/20240305112711.GAZecBj5TMaQDSz6Ym@fat_crate.local
I'll take it, thanks!
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 140+ messages in thread
end of thread, other threads:[~2024-03-20 16:55 UTC | newest]
Thread overview: 140+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-02-27 13:26 [PATCH 5.10 000/122] 5.10.211-rc1 review Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 001/122] net/sched: Retire CBQ qdisc Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 002/122] net/sched: Retire ATM qdisc Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 003/122] net/sched: Retire dsmark qdisc Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 004/122] smb: client: fix OOB in receive_encrypted_standard() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 005/122] smb: client: fix potential OOBs in smb2_parse_contexts() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 006/122] smb: client: fix parsing of SMB3.1.1 POSIX create context Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 007/122] sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 008/122] userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 009/122] zonefs: Improve error handling Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 010/122] sched/rt: Fix sysctl_sched_rr_timeslice intial value Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 011/122] sched/rt: Disallow writing invalid values to sched_rt_period_us Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 012/122] scsi: target: core: Add TMF to tmr_list handling Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 013/122] dmaengine: shdma: increase size of dev_id Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 014/122] dmaengine: fsl-qdma: increase size of irq_name Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 015/122] wifi: cfg80211: fix missing interfaces when dumping Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 016/122] wifi: mac80211: fix race condition on enabling fast-xmit Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 017/122] fbdev: savage: Error out if pixclock equals zero Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 018/122] fbdev: sis: " Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 019/122] spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 020/122] ahci: asm1166: correct count of reported ports Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 021/122] ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 022/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 023/122] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 024/122] dmaengine: ti: edma: Add some null pointer checks to the edma_probe Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 025/122] regulator: pwm-regulator: Add validity checks in continuous .get_voltage Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 026/122] nvmet-tcp: fix nvme tcp ida memory leak Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 027/122] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616 Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 028/122] spi: sh-msiof: avoid integer overflow in constants Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 029/122] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 030/122] nvme-fc: do not wait in vain when unloading module Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 031/122] nvmet-fcloop: swap the list_add_tail arguments Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 032/122] nvmet-fc: release reference on target port Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 033/122] nvmet-fc: abort command when there is no binding Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 034/122] ext4: correct the hole length returned by ext4_map_blocks() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 035/122] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 036/122] efi: runtime: Fix potential overflow of soft-reserved region size Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 037/122] efi: Dont add memblocks for soft-reserved memory Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 038/122] hwmon: (coretemp) Enlarge per package core count limit Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 039/122] scsi: lpfc: Use unsigned type for num_sge Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 040/122] firewire: core: send bus reset promptly on gap count error Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 041/122] virtio-blk: Ensure no requests in virtqueues before deleting vqs Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 042/122] pmdomain: renesas: r8a77980-sysc: CR7 must be always on Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 043/122] ARM: dts: BCM53573: Drop nonexistent "default-off" LED trigger Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 044/122] irqchip/mips-gic: Dont touch vl_map if a local interrupt is not routable Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 045/122] ARM: dts: imx: Set default tuning step for imx6sx usdhc Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 046/122] ASoC: fsl_micfil: register platform component before registering cpu dai Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 047/122] media: av7110: prevent underflow in write_ts_to_decoder() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 048/122] hvc/xen: prevent concurrent accesses to the shared ring Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 049/122] hsr: Avoid double remove of a node Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 050/122] x86/uaccess: Implement macros for CMPXCHG on user addresses Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 051/122] seccomp: Invalidate seccomp mode to catch death failures Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 052/122] block: ataflop: fix breakage introduced at blk-mq refactoring Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 053/122] powerpc/watchpoint: Workaround P10 DD1 issue with VSX-32 byte instructions Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 054/122] powerpc/watchpoints: Annotate atomic context in more places Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 055/122] cifs: add a warning when the in-flight count goes negative Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 056/122] mtd: spinand: macronix: Add support for MX35LFxGE4AD Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 057/122] ASoC: Intel: boards: harden codec property handling Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 5.10 058/122] ASoC: Intel: boards: get codec device with ACPI instead of bus search Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 059/122] ASoC: Intel: bytcr_rt5651: Drop reference count of ACPI device after use Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 060/122] task_stack, x86/cea: Force-inline stack helpers Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 061/122] btrfs: tree-checker: check for overlapping extent items Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 062/122] btrfs: introduce btrfs_lookup_match_dir Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 063/122] btrfs: unify lookup return value when dir entry is missing Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 064/122] btrfs: do not pin logs too early during renames Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 065/122] lan743x: fix for potential NULL pointer dereference with bare card Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 066/122] platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 067/122] iwlwifi: mvm: do more useful queue sync accounting Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 068/122] iwlwifi: mvm: write queue_sync_state only for sync Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 069/122] jbd2: remove redundant buffer io error checks Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 070/122] jbd2: recheck chechpointing non-dirty buffer Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 071/122] jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 072/122] x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm() Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 073/122] erofs: fix lz4 inplace decompression Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 074/122] IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 075/122] s390/cio: fix invalid -EBUSY on ccw_device_start Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 076/122] dm-crypt: dont modify the data when using authenticated encryption Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 077/122] KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 078/122] KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table() Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 079/122] gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 080/122] PCI/MSI: Prevent MSI hardware interrupt number truncation Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 081/122] l2tp: pass correct message length to ip6_append_data Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 082/122] ARM: ep93xx: Add terminator to gpiod_lookup_table Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 083/122] Revert "x86/ftrace: Use alternative RET encoding" Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 084/122] x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBR Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Greg Kroah-Hartman
2024-03-04 18:49 ` Omar Sandoval
2024-03-05 11:27 ` [PATCH for 5.10-stable] x86/paravirt: Fix build due to __text_gen_insn() backport Borislav Petkov
2024-03-11 20:43 ` Omar Sandoval
2024-03-18 10:17 ` [PATCH 5.10 085/122] x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch() Emeric Brun
2024-03-18 14:20 ` Borislav Petkov
2024-03-20 16:03 ` Sasha Levin
2024-02-27 13:27 ` [PATCH 5.10 086/122] x86/ftrace: Use alternative RET encoding Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 087/122] x86/returnthunk: Allow different return thunks Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 088/122] Revert "x86/alternative: Make custom return thunk unconditional" Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 089/122] x86/alternative: Make custom return thunk unconditional Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 090/122] usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 091/122] usb: cdns3: fix memory double free when handle zero packet Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 092/122] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 093/122] usb: roles: fix NULL pointer issue when put modules reference Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 094/122] usb: roles: dont get/set_role() when usb_role_switch is unregistered Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 095/122] mptcp: fix lockless access in subflow ULP diag Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 096/122] IB/hfi1: Fix a memleak in init_credit_return Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 097/122] RDMA/bnxt_re: Return error for SRQ resize Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 098/122] RDMA/srpt: Support specifying the srpt_service_guid parameter Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 099/122] RDMA/qedr: Fix qedr_create_user_qp error flow Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 100/122] arm64: dts: rockchip: set num-cs property for spi on px30 Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 101/122] RDMA/srpt: fix function pointer cast warnings Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 102/122] bpf, scripts: Correct GPL license name Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 103/122] scsi: jazz_esp: Only build if SCSI core is builtin Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 104/122] nouveau: fix function cast warnings Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 105/122] ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 106/122] ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 107/122] afs: Increase buffer size in afs_update_volume_status() Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 108/122] ipv6: sr: fix possible use-after-free and null-ptr-deref Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 109/122] packet: move from strlcpy with unused retval to strscpy Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 110/122] net: dev: Convert sa_data to flexible array in struct sockaddr Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 111/122] s390: use the correct count for __iowrite64_copy() Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 112/122] tls: rx: jump to a more appropriate label Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 113/122] tls: rx: drop pointless else after goto Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 114/122] tls: stop recv() if initial process_rx_list gave us non-DATA Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 115/122] netfilter: nf_tables: set dormant flag on hook register failure Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 116/122] drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3 Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 117/122] drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set Greg Kroah-Hartman
2024-02-27 13:27 ` [PATCH 5.10 118/122] drm/amd/display: Fix memory leak in dm_sw_fini() Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 119/122] block: ataflop: more blk-mq refactoring fixes Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 120/122] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 121/122] arp: Prevent overflow in arp_req_get() Greg Kroah-Hartman
2024-02-27 13:28 ` [PATCH 5.10 122/122] ext4: regenerate buddy after block freeing failed if under fc replay Greg Kroah-Hartman
2024-02-27 18:28 ` [PATCH 5.10 000/122] 5.10.211-rc1 review Pavel Machek
2024-02-27 18:56 ` Daniel Díaz
2024-02-27 18:56 ` Florian Fainelli
2024-02-28 6:03 ` Greg Kroah-Hartman
2024-02-27 18:58 ` Florian Fainelli
2024-02-27 23:59 ` Dominique Martinet
2024-02-28 6:06 ` Greg Kroah-Hartman
2024-02-28 20:39 ` Kees Cook
2024-02-29 2:22 ` Dominique Martinet
2024-02-28 13:42 ` Jon Hunter
2024-02-29 10:56 ` Shreeya Patel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).