From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: RD Babiera <rdbabiera@google.com>
Cc: badhri@google.com, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH v1] usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach
Date: Wed, 30 Apr 2025 17:03:11 +0300 [thread overview]
Message-ID: <aBItn7_wakw5RqoH@kuha.fi.intel.com> (raw)
In-Reply-To: <20250429234743.3749129-2-rdbabiera@google.com>
On Tue, Apr 29, 2025 at 11:47:42PM +0000, RD Babiera wrote:
> This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect
> SNKAS.
>
> tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance
> testers can interpret the TryWait.Src to Attached.Src transition after
> Try.Snk as being in Attached.Src the entire time, so ~170ms is lost
> to the debounce timer.
>
> Setting the data role can be a costly operation in host mode, and when
> completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4
> to fail.
>
> Turn VBUS on before tcpm_set_roles to meet timing requirement.
>
> Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
> Cc: stable@vger.kernel.org
> Signed-off-by: RD Babiera <rdbabiera@google.com>
> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 34 +++++++++++++++++-----------------
> 1 file changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 784fa23102f9..e099a3c4428d 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -4355,17 +4355,6 @@ static int tcpm_src_attach(struct tcpm_port *port)
>
> tcpm_enable_auto_vbus_discharge(port, true);
>
> - ret = tcpm_set_roles(port, true, TYPEC_STATE_USB,
> - TYPEC_SOURCE, tcpm_data_role_for_source(port));
> - if (ret < 0)
> - return ret;
> -
> - if (port->pd_supported) {
> - ret = port->tcpc->set_pd_rx(port->tcpc, true);
> - if (ret < 0)
> - goto out_disable_mux;
> - }
> -
> /*
> * USB Type-C specification, version 1.2,
> * chapter 4.5.2.2.8.1 (Attached.SRC Requirements)
> @@ -4375,13 +4364,24 @@ static int tcpm_src_attach(struct tcpm_port *port)
> (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) {
> ret = tcpm_set_vconn(port, true);
> if (ret < 0)
> - goto out_disable_pd;
> + return ret;
> }
>
> ret = tcpm_set_vbus(port, true);
> if (ret < 0)
> goto out_disable_vconn;
>
> + ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, TYPEC_SOURCE,
> + tcpm_data_role_for_source(port));
> + if (ret < 0)
> + goto out_disable_vbus;
> +
> + if (port->pd_supported) {
> + ret = port->tcpc->set_pd_rx(port->tcpc, true);
> + if (ret < 0)
> + goto out_disable_mux;
> + }
> +
> port->pd_capable = false;
>
> port->partner = NULL;
> @@ -4392,14 +4392,14 @@ static int tcpm_src_attach(struct tcpm_port *port)
>
> return 0;
>
> -out_disable_vconn:
> - tcpm_set_vconn(port, false);
> -out_disable_pd:
> - if (port->pd_supported)
> - port->tcpc->set_pd_rx(port->tcpc, false);
> out_disable_mux:
> tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
> TYPEC_ORIENTATION_NONE);
> +out_disable_vbus:
> + tcpm_set_vbus(port, false);
> +out_disable_vconn:
> + tcpm_set_vconn(port, false);
> +
> return ret;
> }
>
>
> base-commit: 615dca38c2eae55aff80050275931c87a812b48c
> --
> 2.49.0.967.g6a0df3ecc3-goog
--
heikki
next prev parent reply other threads:[~2025-04-30 14:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-29 23:47 [PATCH v1] usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach RD Babiera
2025-04-30 14:03 ` Heikki Krogerus [this message]
2025-05-01 15:41 ` Greg KH
2025-05-06 17:57 ` RD Babiera
2025-05-09 14:44 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aBItn7_wakw5RqoH@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rdbabiera@google.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox