From: Vitaly Chikunov <vt@altlinux.org>
To: Junjie Cao <junjie.cao@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>,
Simona Vetter <simona@ffwll.ch>, Helge Deller <deller@gmx.de>,
Zsolt Kajtar <soci@c64.rulez.org>,
Albin Babu Varghese <albinbabuvarghese20@gmail.com>,
linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
regressions@lists.linux.dev
Subject: Re: [PATCH v2] fbdev: bitblit: bound-check glyph index in bit_putcs*
Date: Fri, 26 Dec 2025 01:29:13 +0300 [thread overview]
Message-ID: <aU23brU4lZqIkw4Z@altlinux.org> (raw)
In-Reply-To: <20251020134701.84082-1-junjie.cao@intel.com>
Dear linux-fbdev, stable,
On Mon, Oct 20, 2025 at 09:47:01PM +0800, Junjie Cao wrote:
> bit_putcs_aligned()/unaligned() derived the glyph pointer from the
> character value masked by 0xff/0x1ff, which may exceed the actual font's
> glyph count and read past the end of the built-in font array.
> Clamp the index to the actual glyph count before computing the address.
>
> This fixes a global out-of-bounds read reported by syzbot.
>
> Reported-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
> Closes: https://syzkaller.appspot.com/bug?extid=793cf822d213be1a74f2
> Tested-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
> Signed-off-by: Junjie Cao <junjie.cao@intel.com>
This commit is applied to v5.10.247 and causes a regression: when
switching VT with ctrl-alt-f2 the screen is blank or completely filled
with angle characters, then new text is not appearing (or not visible).
This commit is found with git bisect from v5.10.246 to v5.10.247:
0998a6cb232674408a03e8561dc15aa266b2f53b is the first bad commit
commit 0998a6cb232674408a03e8561dc15aa266b2f53b
Author: Junjie Cao <junjie.cao@intel.com>
AuthorDate: 2025-10-20 21:47:01 +0800
Commit: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CommitDate: 2025-12-07 06:08:07 +0900
fbdev: bitblit: bound-check glyph index in bit_putcs*
commit 18c4ef4e765a798b47980555ed665d78b71aeadf upstream.
bit_putcs_aligned()/unaligned() derived the glyph pointer from the
character value masked by 0xff/0x1ff, which may exceed the actual font's
glyph count and read past the end of the built-in font array.
Clamp the index to the actual glyph count before computing the address.
This fixes a global out-of-bounds read reported by syzbot.
Reported-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=793cf822d213be1a74f2
Tested-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/video/fbdev/core/bitblit.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
The minimal reproducer in cli, after kernel is booted:
date >/dev/tty2; chvt 2
and the date does not appear.
Thanks,
#regzbot introduced: 0998a6cb232674408a03e8561dc15aa266b2f53b
> ---
> v1: https://lore.kernel.org/linux-fbdev/5d237d1a-a528-4205-a4d8-71709134f1e1@suse.de/
> v1 -> v2:
> - Fix indentation and add blank line after declarations with the .pl helper
> - No functional changes
>
> drivers/video/fbdev/core/bitblit.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/video/fbdev/core/bitblit.c b/drivers/video/fbdev/core/bitblit.c
> index 9d2e59796c3e..085ffb44c51a 100644
> --- a/drivers/video/fbdev/core/bitblit.c
> +++ b/drivers/video/fbdev/core/bitblit.c
> @@ -79,12 +79,16 @@ static inline void bit_putcs_aligned(struct vc_data *vc, struct fb_info *info,
> struct fb_image *image, u8 *buf, u8 *dst)
> {
> u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
> + unsigned int charcnt = vc->vc_font.charcount;
> u32 idx = vc->vc_font.width >> 3;
> u8 *src;
>
> while (cnt--) {
> - src = vc->vc_font.data + (scr_readw(s++)&
> - charmask)*cellsize;
> + u16 ch = scr_readw(s++) & charmask;
> +
> + if (ch >= charcnt)
> + ch = 0;
> + src = vc->vc_font.data + (unsigned int)ch * cellsize;
>
> if (attr) {
> update_attr(buf, src, attr, vc);
> @@ -112,14 +116,18 @@ static inline void bit_putcs_unaligned(struct vc_data *vc,
> u8 *dst)
> {
> u16 charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff;
> + unsigned int charcnt = vc->vc_font.charcount;
> u32 shift_low = 0, mod = vc->vc_font.width % 8;
> u32 shift_high = 8;
> u32 idx = vc->vc_font.width >> 3;
> u8 *src;
>
> while (cnt--) {
> - src = vc->vc_font.data + (scr_readw(s++)&
> - charmask)*cellsize;
> + u16 ch = scr_readw(s++) & charmask;
> +
> + if (ch >= charcnt)
> + ch = 0;
> + src = vc->vc_font.data + (unsigned int)ch * cellsize;
>
> if (attr) {
> update_attr(buf, src, attr, vc);
> --
> 2.48.1
>
next parent reply other threads:[~2025-12-25 22:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20251020134701.84082-1-junjie.cao@intel.com>
2025-12-25 22:29 ` Vitaly Chikunov [this message]
2025-12-26 12:21 ` [PATCH v2] fbdev: bitblit: bound-check glyph index in bit_putcs* Vitaly Chikunov
2025-12-27 2:04 ` Barry K. Nathan
2026-01-06 9:04 ` Thorsten Leemhuis
2026-01-10 13:20 ` Woody Suwalski
2026-01-11 5:26 ` Woody Suwalski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aU23brU4lZqIkw4Z@altlinux.org \
--to=vt@altlinux.org \
--cc=albinbabuvarghese20@gmail.com \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=junjie.cao@intel.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=regressions@lists.linux.dev \
--cc=simona@ffwll.ch \
--cc=soci@c64.rulez.org \
--cc=stable@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox