On Tue, Mar 24, 2026 at 10:29:03AM +0000, Andrei Kuchynski wrote: > The typec plug alternate mode is already registered as part of the bus. > When both class and bus are set for a device, device_add() attempts to > create the "subsystem" symlink in the device's sysfs directory twice, once > for the bus and once for the class. > This results in a duplicate filename error during registration, > causing the alternate mode registration to fail with warnings: > > cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/ > PNP0C09:00/GOOG0004:00/cros-ec-dev.1.auto/cros_ec_ucsi.3.auto/typec/ > port1/port1-cable/port1-plug0/port1-plug0.0/subsystem' > typec port0-plug0: failed to register alternate mode (-17) > cros_ec_ucsi.3.auto: failed to registers svid 0x8087 mode 1 > > Cc: stable@vger.kernel.org > Fixes: 67ab45426215 ("usb: typec: Set the bus also for the port and plug altmodes") > Tested-by: Madhu M > Signed-off-by: Andrei Kuchynski Reviewed-by: Benson Leung > --- > Changes in V2: > - Marked as a Fix > > drivers/usb/typec/class.c | 4 ---- > 1 file changed, 4 deletions(-) > > diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c > index 8314309094719..0977581ad1b6e 100644 > --- a/drivers/usb/typec/class.c > +++ b/drivers/usb/typec/class.c > @@ -686,10 +686,6 @@ typec_register_altmode(struct device *parent, > > alt->adev.dev.bus = &typec_bus; > > - /* Plug alt modes need a class to generate udev events. */ > - if (is_typec_plug(parent)) > - alt->adev.dev.class = &typec_class; > - > ret = device_register(&alt->adev.dev); > if (ret) { > dev_err(parent, "failed to register alternate mode (%d)\n", > -- > 2.53.0.983.g0bb29b3bc5-goog > >