Re: [PATCH net 1/2] net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errata

[Andrei Botila <andrei.botila@oss.nxp.com>]

On 3/4/2025 2:16 AM, Andrei Botila wrote:
> The most recent sillicon versions of TJA1120 and TJA1121 can achieve
> full silicon performance by putting the PHY in managed mode.
> 
> It is necessary to apply these PHY writes before link gets established.
> Application of this fix is required after restart of device and wakeup
> from sleep.
> 
> Cc: stable@vger.kernel.org
> Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support")
> Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com>
> ---
>  drivers/net/phy/nxp-c45-tja11xx.c | 52 +++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
> index 34231b5b9175..e083b1a714fd 100644
> --- a/drivers/net/phy/nxp-c45-tja11xx.c
> +++ b/drivers/net/phy/nxp-c45-tja11xx.c
> @@ -22,6 +22,11 @@
>  #define PHY_ID_TJA_1103			0x001BB010
>  #define PHY_ID_TJA_1120			0x001BB031
>  
> +#define VEND1_DEVICE_ID3		0x0004
> +#define TJA1120_DEV_ID3_SILICON_VERSION	GENMASK(15, 12)
> +#define TJA1120_DEV_ID3_SAMPLE_TYPE	GENMASK(11, 8)
> +#define DEVICE_ID3_SAMPLE_TYPE_R	0x9
> +
>  #define VEND1_DEVICE_CONTROL		0x0040
>  #define DEVICE_CONTROL_RESET		BIT(15)
>  #define DEVICE_CONTROL_CONFIG_GLOBAL_EN	BIT(14)
> @@ -1593,6 +1598,50 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev)
>  	return 0;
>  }
>  
> +/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 */
> +static void nxp_c45_tja1120_errata(struct phy_device *phydev)
> +{
> +	int silicon_version, sample_type;
> +	bool macsec_ability;
> +	int phy_abilities;
> +	int ret = 0;
> +
> +	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_ID3);
> +	if (ret < 0)
> +		return;
> +
> +	sample_type = FIELD_GET(TJA1120_DEV_ID3_SAMPLE_TYPE, ret);
> +	if (sample_type != DEVICE_ID3_SAMPLE_TYPE_R)
> +		return;
> +
> +	silicon_version = FIELD_GET(TJA1120_DEV_ID3_SILICON_VERSION, ret);
> +
> +	phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1,
> +				     VEND1_PORT_ABILITIES);
> +	macsec_ability = !!(phy_abilities & MACSEC_ABILITY);
> +	if ((!macsec_ability && silicon_version == 2) ||
> +	    (macsec_ability && silicon_version == 1)) {
> +		/* TJA1120/TJA1121 PHY configuration errata workaround.
> +		 * Apply PHY writes sequence before link up.
> +		 */
> +		if (!macsec_ability) {
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x4b95);
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0xf3cd);
> +		} else {
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x89c7);
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0893);
> +		}
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x0476, 0x58a0);
> +
> +		phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x8921, 0xa3a);
> +		phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x89F1, 0x16c1);
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0);
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0);
> +	}
> +}
> +
>  static int nxp_c45_config_init(struct phy_device *phydev)
>  {
>  	int ret;
> @@ -1609,6 +1658,9 @@ static int nxp_c45_config_init(struct phy_device *phydev)
>  	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 1);
>  	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 2);
>  
> +	if (phydev->drv->phy_id == PHY_ID_TJA_1120)

Will send a v2 because the PHY_ID_MATCH_MODEL(PHY_ID_TJA_1120) needed for setting 
phy_id used in this check is removed in the changes from
https://lore.kernel.org/netdev/20250228154320.2979000-3-andrei.botila@oss.nxp.com/ .
I will use a phy_id_compare() for this check.

> +		nxp_c45_tja1120_errata(phydev);
> +
>  	phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG,
>  			 PHY_CONFIG_AUTO);
>