From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Alexey Charkov <alchark@flipper.net>
Cc: Badhri Jagan Sridharan <badhri@google.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
RD Babiera <rdbabiera@google.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH 2/5] usb: typec: tcpci: Receive SOP' only while sourcing VCONN
Date: Thu, 12 Nov 2026 01:26:49 +0100 [thread overview]
Message-ID: <avUHqKJtDv2MNV7m@venus> (raw)
In-Reply-To: <20261103-husb311-cable-comm-v1-2-6217dabc1a85@flipper.net>
[-- Attachment #1: Type: text/plain, Size: 4923 bytes --]
Hi,
On Tue, Nov 03, 2026 at 03:21:23PM +0400, Alexey Charkov wrote:
> A TCPC acks every message type enabled in RECEIVE_DETECT and passes it
> on to TCPM. With SOP' enabled while the partner sources VCONN, the port
> acks the partner's requests to the cable plug and the plug's replies to
> the partner, colliding with the GoodCRC that the plug or the partner
> sends. TCPM also tries to answer these messages as if they were destined
> to it, which for the case of a partner's SOP' Discover Identity on a
> HUSB311 made the partner soft reset the contract every time.
>
> TCPM talks to the cable plug only while it is the VCONN Source, as USB
> PD 3.0 section 6.3.11 requires, so listen for SOP' only then.
>
> Switch SOP' reception off before VCONN goes off and on only once it is
> on. If that fails, warn instead of failing the VCONN switch: SOP'
> reception left off only costs cable discovery, and left on is no worse
> than before this change.
>
> Cc: stable@vger.kernel.org
> Fixes: 3bbb9ba4f660 ("usb: typec: tcpci: add tcpm_transmit_type to tcpm_pd_receive")
> Signed-off-by: Alexey Charkov <alchark@flipper.net>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Greetings,
-- Sebastian
> drivers/usb/typec/tcpm/tcpci.c | 72 ++++++++++++++++++++++++++++--------------
> 1 file changed, 49 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
> index 6717ac914c6a..af8db6b4497a 100644
> --- a/drivers/usb/typec/tcpm/tcpci.c
> +++ b/drivers/usb/typec/tcpm/tcpci.c
> @@ -41,6 +41,7 @@ struct tcpci {
> unsigned int rx_type_mask;
>
> bool controls_vbus;
> + bool vconn_enabled;
>
> struct tcpc_dev tcpc;
> struct tcpci_data *data;
> @@ -344,11 +345,45 @@ static void tcpci_set_partner_usb_comm_capable(struct tcpc_dev *tcpc, bool capab
> tcpci->data->set_partner_usb_comm_capable(tcpci, tcpci->data, capable);
> }
>
> +static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable)
> +{
> + struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> + unsigned int reg = 0;
> + int ret;
> +
> + if (enable) {
> + reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET;
> + /* Only the VCONN Source talks to the cable plug */
> + if (tcpci->data->cable_comm_capable && tcpci->vconn_enabled)
> + reg |= TCPC_RX_DETECT_SOP1;
> + }
> +
> + tcpci->rx_type_mask = reg;
> + ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
> {
> struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> int ret;
>
> + /*
> + * Without VCONN from us, SOP' traffic is between the partner and the
> + * cable plug, and our GoodCRC would collide with theirs. So stop
> + * receiving SOP' before VCONN goes off, and start only once it is on.
> + * Neither is worth failing the VCONN switch over.
> + */
> + if (!enable) {
> + tcpci->vconn_enabled = false;
> + if ((tcpci->rx_type_mask & TCPC_RX_DETECT_SOP1) &&
> + tcpci_set_pd_rx(tcpc, true) < 0)
> + dev_warn(tcpci->dev, "Failed to disable SOP' reception\n");
> + }
> +
> /* Handle vendor set vconn */
> if (tcpci->data->set_vconn) {
> ret = tcpci->data->set_vconn(tcpci, tcpci->data, enable);
> @@ -356,9 +391,20 @@ static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
> return ret;
> }
>
> - return regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL,
> - TCPC_POWER_CTRL_VCONN_ENABLE,
> - enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0);
> + ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL,
> + TCPC_POWER_CTRL_VCONN_ENABLE,
> + enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0);
> + if (ret < 0)
> + return ret;
> +
> + if (enable) {
> + tcpci->vconn_enabled = true;
> + if (tcpci->data->cable_comm_capable && tcpci->rx_type_mask &&
> + tcpci_set_pd_rx(tcpc, true) < 0)
> + dev_warn(tcpci->dev, "Failed to enable SOP' reception\n");
> + }
> +
> + return 0;
> }
>
> static int tcpci_enable_auto_vbus_discharge(struct tcpc_dev *dev, bool enable)
> @@ -478,26 +524,6 @@ static int tcpci_set_roles(struct tcpc_dev *tcpc, bool attached,
> return 0;
> }
>
> -static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable)
> -{
> - struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> - unsigned int reg = 0;
> - int ret;
> -
> - if (enable) {
> - reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET;
> - if (tcpci->data->cable_comm_capable)
> - reg |= TCPC_RX_DETECT_SOP1;
> - }
> -
> - tcpci->rx_type_mask = reg;
> - ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg);
> - if (ret < 0)
> - return ret;
> -
> - return 0;
> -}
> -
> static int tcpci_get_vbus(struct tcpc_dev *tcpc)
> {
> struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
>
> --
> 2.56.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2026-11-12 0:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 11:21 [PATCH 0/5] usb: typec: cable comms on RT1711H-compatible TCPCs and FUSB302 Alexey Charkov
2026-11-03 11:21 ` [PATCH 1/5] usb: typec: tcpm: Stop a source from repeating a cable Soft_Reset Alexey Charkov
2026-11-03 11:21 ` [PATCH 2/5] usb: typec: tcpci: Receive SOP' only while sourcing VCONN Alexey Charkov
2026-11-12 0:26 ` Sebastian Reichel [this message]
2026-11-11 14:00 ` [PATCH 0/5] usb: typec: cable comms on RT1711H-compatible TCPCs and FUSB302 Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avUHqKJtDv2MNV7m@venus \
--to=sebastian.reichel@collabora.com \
--cc=alchark@flipper.net \
--cc=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rdbabiera@google.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox