Hi While updating from 6.12.116 to 6.12.117 on one system the following warning is seen: [ 0.991048] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.992476] Run /init as init process [ 0.993426] with arguments: [ 0.993428] /init [ 0.993428] with environment: [ 0.993429] HOME=/ [ 0.993429] TERM=linux [ 1.091378] ------------[ cut here ]------------ [ 1.092538] CPA detected W^X violation: 0000000000000121 -> 0000000000000123 range: 0xffffffffc0477000 - 0x ffffffffc0477fff PFN 109c1f [ 1.093994] WARNING: CPU: 5 PID: 222 at arch/x86/mm/pat/set_memory.c:665 __change_page_attr_set_clr+0xf62/0xfb0 [ 1.095730] Modules linked in: [ 1.097101] CPU: 5 UID: 0 PID: 222 Comm: (udev-worker) Not tainted 6.12.117+deb13-amd64 #1 Debian 6.12.117-1 [ 1.098671] Hardware name: LENOVO 20XXS1FU00/20XXS1FU00, BIOS N32ETA2W (1.78 ) 07/23/2026 [ 1.100096] RIP: 0010:__change_page_attr_set_clr+0xf62/0xfb0 [ 1.101357] Code: 09 ea e9 19 fa ff ff 48 8b 4c 24 10 49 89 d9 4c 89 d6 48 89 54 24 08 48 c7 c7 38 43 95 a6 c6 05 d1 fd d7 01 01 e8 9e 76 01 00 <0f> 0b 48 8b 54 24 08 e9 22 fc ff ff 80 3d ba fd d7 01 00 0f 85 15 [ 1.102928] RSP: 0018:ffffd02d40557648 EFLAGS: 00010286 [ 1.104241] RAX: 0000000000000000 RBX: 0000000000109c1f RCX: 0000000000000003 [ 1.105561] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000001 [ 1.107204] RBP: 0000000109c1f121 R08: 0000000000000000 R09: ffffd02d405574c8 [ 1.108503] R10: ffffffffa70b43a8 R11: 0000000000000003 R12: 0000000000000001 [ 1.109816] R13: 0000000109c1f121 R14: 0000000000000001 R15: ffffffffc0477000 [ 1.111556] FS: 00007fcf08a6b980(0000) GS:ffff88c4bf680000(0000) knlGS:0000000000000000 [ 1.112888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.114279] CR2: 000055cf7979a138 CR3: 000000014061e006 CR4: 0000000000f70ef0 [ 1.115600] PKRU: 55555554 [ 1.116935] Call Trace: [ 1.118345] [ 1.119677] ? __purge_vmap_area_lazy+0x13c/0x320 [ 1.120979] ? _vm_unmap_aliases+0x217/0x260 [ 1.122392] change_page_attr_set_clr+0x104/0x1a0 [ 1.123702] set_memory_rw+0x28/0x40 [ 1.125019] apply_retpolines+0x19c/0x4c0 [ 1.126404] module_finalize+0x209/0x3e0 [ 1.127690] ? add_kallsyms+0x293/0x310 [ 1.128985] load_module+0x17f1/0x1e90 [ 1.130318] ? init_module_from_file+0x89/0xe0 [ 1.131586] init_module_from_file+0x89/0xe0 [ 1.132873] idempotent_init_module+0x11e/0x310 [ 1.134175] __x64_sys_finit_module+0x5e/0xb0 [ 1.135433] do_syscall_64+0x87/0x1b0 [ 1.136706] ? vfs_read+0x24d/0x370 [ 1.137967] ? __x64_sys_pread64+0x98/0xd0 [ 1.139652] ? arch_exit_to_user_mode_prepare.isra.0+0x16/0xa0 [ 1.140905] ? syscall_exit_to_user_mode+0x37/0x1b0 [ 1.142172] ? do_syscall_64+0x93/0x1b0 [ 1.143402] ? __count_memcg_events+0x53/0xf0 [ 1.144644] ? count_memcg_events.constprop.0+0x1a/0x30 [ 1.145859] ? handle_mm_fault+0x1bb/0x2c0 [ 1.147452] ? do_user_addr_fault+0x367/0x650 [ 1.148626] ? clear_bhb_loop+0x70/0xc0 [ 1.149809] ? clear_bhb_loop+0x70/0xc0 [ 1.151303] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 1.152445] RIP: 0033:0x7fcf095cf4f9 [ 1.153586] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e7 68 0d 00 f7 d8 64 89 01 48 [ 1.155067] RSP: 002b:00007fffd10634a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 1.156238] RAX: ffffffffffffffda RBX: 000055cf79783110 RCX: 00007fcf095cf4f9 [ 1.157419] RDX: 0000000000000004 RSI: 00007fcf07cf944d RDI: 0000000000000010 [ 1.158766] RBP: 0000000000000004 R08: 0000000000000000 R09: 000055cf79763ba0 [ 1.159927] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcf07cf944d [ 1.161090] R13: 0000000000020000 R14: 000055cf79784bc0 R15: 0000000000000000 [ 1.162318] [ 1.163460] ---[ end trace 0000000000000000 ]--- I'm attaching for comparison as well the log from 6.12.116 which does not show any CPA detected W^X violation message, while the 6.12.117 shows it twice, with one WARNING. Regards, Salvatore