From: Damien Le Moal <dlemoal@kernel.org>
To: Niklas Cassel <cassel@kernel.org>,
Mario Limonciello <mario.limonciello@amd.com>,
Jian-Hong Pan <jhp@endlessos.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org, Tim Teichmann <teichmanntim@outlook.de>,
linux-ide@vger.kernel.org
Subject: Re: [PATCH] ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
Date: Fri, 31 May 2024 09:00:09 +0900 [thread overview]
Message-ID: <b7e8b2df-7cfc-415c-99e7-f3fcd953d26d@kernel.org> (raw)
In-Reply-To: <20240530212703.561517-2-cassel@kernel.org>
On 5/31/24 6:27 AM, Niklas Cassel wrote:
> Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
> dropped the board_ahci_low_power board type, and instead enables LPM if:
> -The AHCI controller reports that it supports LPM (Partial/Slumber), and
> -CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
> -The port is not defined as external in the per port PxCMD register, and
> -The port is not defined as hotplug capable in the per port PxCMD
> register.
>
> Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
>
> For HIPM (host initiated power management) to get enabled, both the AHCI
> controller and the drive have to report that they support HIPM.
>
> For DIPM (device initiated power management) to get enabled, only the
> drive has to report that it supports DIPM. However, the HBA will reject
> device requests to enter LPM states which the HBA does not support.
>
> The problem is that Apacer AS340 drives do not handle low power modes
> correctly. The problem was most likely not seen before because no one
> had used this drive with a AHCI controller with LPM enabled.
>
> Add a quirk so that we do not enable LPM for this drive, since we see
> command timeouts if we do (even though the drive claims to support DIPM).
>
> Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
> Cc: stable@vger.kernel.org
> Reported-by: Tim Teichmann <teichmanntim@outlook.de>
> Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
--
Damien Le Moal
Western Digital Research
next prev parent reply other threads:[~2024-05-31 0:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-30 21:27 [PATCH] ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340 Niklas Cassel
2024-05-30 21:55 ` Niklas Cassel
2024-05-31 0:01 ` Damien Le Moal
2024-05-31 0:00 ` Damien Le Moal [this message]
2024-05-31 12:59 ` Mika Westerberg
2024-05-31 13:17 ` Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7e8b2df-7cfc-415c-99e7-f3fcd953d26d@kernel.org \
--to=dlemoal@kernel.org \
--cc=cassel@kernel.org \
--cc=jhp@endlessos.org \
--cc=linux-ide@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mika.westerberg@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=teichmanntim@outlook.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox