From: CKI Project <cki-project@redhat.com>
To: Linux Stable maillist <stable@vger.kernel.org>
Subject: ✅ PASS: Stable queue: queue-5.3
Date: Wed, 06 Nov 2019 18:57:43 -0000 [thread overview]
Message-ID: <cki.0BAFBAB745.ILCPBBD3JD@redhat.com> (raw)
Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 37b4d0c37c0b - Linux 5.3.9
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://artifacts.cki-project.org/pipelines/268099
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 37b4d0c37c0b - Linux 5.3.9
We grabbed the 39e18e74c57b commit of the stable queue repository.
We then merged the patchset with `git am`:
regulator-of-fix-suspend-min-max-voltage-parsing.patch
asoc-samsung-arndale-add-missing-of-node-dereferenci.patch
asoc-wm8994-do-not-register-inapplicable-controls-fo.patch
regulator-da9062-fix-suspend_enable-disable-preparat.patch
asoc-topology-fix-a-signedness-bug-in-soc_tplg_dapm_.patch
arm64-dts-allwinner-a64-pine64-plus-add-phy-regulato.patch
arm64-dts-allwinner-a64-drop-pmu-node.patch
arm64-dts-allwinner-a64-sopine-baseboard-add-phy-reg.patch
arm64-dts-fix-gpio-to-pinmux-mapping.patch
regulator-ti-abb-fix-timeout-in-ti_abb_wait_txdone-t.patch
pinctrl-intel-allocate-irq-chip-dynamic.patch
asoc-sof-loader-fix-kernel-oops-on-firmware-boot-fai.patch
asoc-sof-topology-fix-parse-fail-issue-for-byte-bool.patch
asoc-sof-intel-hda-fix-warnings-during-fw-load.patch
asoc-sof-intel-initialise-and-verify-fw-crash-dump-d.patch
asoc-sof-intel-hda-disable-dmi-l1-entry-during-captu.patch
asoc-rt5682-add-null-handler-to-set_jack-function.patch
asoc-intel-sof_rt5682-add-remove-function-to-disable.patch
asoc-intel-bytcr_rt5651-add-null-check-to-support_bu.patch
regulator-pfuze100-regulator-variable-val-in-pfuze10.patch
asoc-wm_adsp-don-t-generate-kcontrols-without-read-f.patch
asoc-rockchip-i2s-fix-rpm-imbalance.patch
arm64-dts-rockchip-fix-rockpro64-rk808-interrupt-lin.patch
arm-dts-logicpd-torpedo-som-remove-twl_keypad.patch
arm64-dts-rockchip-fix-rockpro64-vdd-log-regulator-s.patch
arm64-dts-rockchip-fix-rockpro64-sdhci-settings.patch
pinctrl-ns2-fix-off-by-one-bugs-in-ns2_pinmux_enable.patch
pinctrl-stmfx-fix-null-pointer-on-remove.patch
arm64-dts-zii-ultra-fix-arm-regulator-states.patch
arm-dts-am3874-iceboard-fix-i2c-mux-idle-disconnect-.patch
asoc-msm8916-wcd-digital-add-missing-mix2-path-for-r.patch
asoc-simple_card_utils.h-fix-potential-multiple-rede.patch
arm-dts-use-level-interrupt-for-omap4-5-wlcore.patch
arm-mm-fix-alignment-handler-faults-under-memory-pre.patch
scsi-qla2xxx-fix-a-potential-null-pointer-dereferenc.patch
scsi-scsi_dh_alua-handle-rtpg-sense-code-correctly-d.patch
scsi-sni_53c710-fix-compilation-error.patch
scsi-fix-kconfig-dependency-warning-related-to-53c70.patch
arm-8908-1-add-__always_inline-to-functions-called-f.patch
arm-8914-1-nommu-fix-exc_ret-for-xip.patch
arm64-dts-rockchip-fix-rockpro64-sdmmc-settings.patch
arm64-dts-rockchip-fix-usb-c-on-hugsun-x99-tv-box.patch
arm64-dts-lx2160a-correct-cpu-core-idle-state-name.patch
arm-dts-imx6q-logicpd-re-enable-snvs-power-key.patch
arm-dts-vf610-zii-scu4-aib-specify-i2c-mux-idle-disc.patch
arm-dts-imx7s-correct-gpt-s-ipg-clock-source.patch
arm64-dts-imx8mq-use-correct-clock-for-usdhc-s-ipg-c.patch
arm64-dts-imx8mm-use-correct-clock-for-usdhc-s-ipg-c.patch
perf-tools-fix-resource-leak-of-closedir-on-the-erro.patch
perf-c2c-fix-memory-leak-in-build_cl_output.patch
8250-men-mcb-fix-error-checking-when-get_num_ports-r.patch
perf-kmem-fix-memory-leak-in-compact_gfp_flags.patch
arm-davinci-dm365-fix-mcbsp-dma_slave_map-entry.patch
drm-amdgpu-fix-potential-vm-faults.patch
drm-amdgpu-fix-error-handling-in-amdgpu_bo_list_crea.patch
scsi-target-core-do-not-overwrite-cdb-byte-1.patch
scsi-hpsa-add-missing-hunks-in-reset-patch.patch
asoc-intel-sof-rt5682-add-a-check-for-devm_clk_get.patch
asoc-sof-control-return-true-when-kcontrol-values-ch.patch
tracing-fix-gfp_t-format-for-synthetic-events.patch
arm-dts-bcm2837-rpi-cm3-avoid-leds-gpio-probing-issu.patch
i2c-aspeed-fix-master-pending-state-handling.patch
drm-komeda-don-t-flush-inactive-pipes.patch
arm-8926-1-v7m-remove-register-save-to-stack-before-.patch
selftests-kvm-vmx_set_nested_state_test-don-t-check-.patch
selftests-kvm-fix-sync_regs_test-with-newer-gccs.patch
alsa-hda-add-tigerlake-jasperlake-pci-id.patch
of-unittest-fix-memory-leak-in-unittest_data_add.patch
mips-bmips-mark-exception-vectors-as-char-arrays.patch
irqchip-gic-v3-its-use-the-exact-itslist-for-vmovp.patch
i2c-mt65xx-fix-null-ptr-dereference.patch
i2c-stm32f7-fix-first-byte-to-send-in-slave-mode.patch
i2c-stm32f7-fix-a-race-in-slave-mode-with-arbitratio.patch
i2c-stm32f7-remove-warning-when-compiling-with-w-1.patch
cifs-fix-cifsinodeinfo-lock_sem-deadlock-when-reconn.patch
irqchip-sifive-plic-skip-contexts-except-supervisor-.patch
nbd-protect-cmd-status-with-cmd-lock.patch
nbd-handle-racing-with-error-ed-out-commands.patch
ata-libahci_platform-fix-regulator_get_optional-misu.patch
Compile testing
---------------
We compiled the kernel for 3 architectures:
aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP lite
✅ Loopdev Sanity
✅ jvm test suite
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ iotop: sanity
✅ tuned: tune-processes-through-perf
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ Usex - version 1.9-29
✅ storage: SCSI VPD
✅ stress: stress-ng
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
🚧 ✅ Storage blktests
ppc64le:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP lite
✅ Loopdev Sanity
✅ jvm test suite
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ iotop: sanity
✅ tuned: tune-processes-through-perf
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ Usex - version 1.9-29
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
x86_64:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
🚧 ✅ Storage blktests
Host 2:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ LTP lite
✅ Loopdev Sanity
✅ jvm test suite
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ iotop: sanity
✅ tuned: tune-processes-through-perf
✅ pciutils: sanity smoke test
✅ ALSA PCM loopback test
✅ ALSA Control (mixer) Userspace Element test
✅ Usex - version 1.9-29
✅ storage: SCSI VPD
✅ stress: stress-ng
✅ trace: ftrace/tracer
🚧 ✅ CIFS Connectathon
🚧 ✅ POSIX pjd-fstest suites
Test sources: https://github.com/CKI-project/tests-beaker
💚 Pull requests are welcome for new tests or improvements to existing tests!
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
Testing timeout
---------------
We aim to provide a report within reasonable timeframe. Tests that haven't
finished running are marked with ⏱. Reports for non-upstream kernels have
a Beaker recipe linked to next to each host.
next reply other threads:[~2019-11-06 18:57 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 18:57 CKI Project [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-11-21 23:40 ✅ PASS: Stable queue: queue-5.3 CKI Project
2019-11-19 0:03 CKI Project
2019-11-14 11:17 CKI Project
2019-11-13 1:03 CKI Project
2019-11-12 21:28 CKI Project
2019-11-11 23:27 CKI Project
2019-11-07 15:54 CKI Project
2019-11-07 1:28 CKI Project
2019-11-06 17:38 CKI Project
2019-11-05 12:37 CKI Project
2019-11-04 23:38 CKI Project
2019-11-04 17:29 CKI Project
2019-11-02 11:44 CKI Project
2019-10-21 10:41 CKI Project
2019-10-19 4:30 CKI Project
2019-10-17 4:26 CKI Project
2019-10-17 0:31 CKI Project
2019-10-16 22:45 CKI Project
2019-10-16 22:11 CKI Project
2019-10-14 20:38 CKI Project
2019-10-14 19:37 CKI Project
2019-10-14 18:28 CKI Project
2019-10-11 0:34 CKI Project
2019-10-08 23:59 CKI Project
2019-10-08 12:19 CKI Project
2019-10-07 0:07 CKI Project
2019-10-06 23:19 CKI Project
2019-10-06 14:06 CKI Project
2019-10-06 12:42 CKI Project
2019-10-04 9:03 CKI Project
2019-10-04 8:30 CKI Project
2019-10-04 5:21 CKI Project
2019-10-04 4:42 CKI Project
2019-10-04 4:32 CKI Project
2019-10-03 10:20 CKI Project
2019-09-26 0:49 CKI Project
2019-09-25 10:16 CKI Project
2019-09-24 21:37 CKI Project
2019-09-24 10:48 CKI Project
2019-09-23 15:50 CKI Project
2019-09-22 13:09 CKI Project
2019-09-21 16:27 CKI Project
2019-09-20 7:26 CKI Project
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cki.0BAFBAB745.ILCPBBD3JD@redhat.com \
--to=cki-project@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).