stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ralf Baechle <ralf@linux-mips.org>
To: stable@vger.kernel.org
Subject: [PATCH v2 00/23] MIPS and SSB fixes for 4.0-stable
Date: Fri, 8 May 2015 13:25:08 +0100	[thread overview]
Message-ID: <cover.1431087908.git.ralf@linux-mips.org> (raw)

This is a large number of fixes for MIPS plus one patch for the SSB bus
that didn't make 4.0.  All of these patches are in 4.1

Changes from v1:
  - Dropped patches that got already applied to v4.0.2.

Aaro Koskinen (2):
  MIPS: OCTEON: dma-octeon: fix OHCI USB config check
  MIPS: OCTEON: fix PCI interrupt mapping for D-Link DSR-1000N

Adrien Schildknecht (1):
  SSB: fix Kconfig dependencies

Alexander Sverdlin (1):
  MIPS: Octeon: Remove udelay() causing huge IRQ latency

Chandrakala Chavva (1):
  MIPS: OCTEON: Use correct CSR to soft reset

Ganesan Ramalingam (1):
  MIPS: Netlogic: Fix for SATA PHY init

John Crispin (2):
  MIPS: ralink: Fix bad config symbol in PCI makefile.
  MIPS: ralink: add missing symbol for RALINK_ILL_ACC

Lars Persson (2):
  Revert "MIPS: Remove race window in page fault handling"
  MIPS: Fix race condition in lazy cache flushing.

Markos Chandras (7):
  MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
  MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
  MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
  MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
  MIPS: Kconfig: Disable SMP/CPS for 64-bit
  MIPS: asm: elf: Set O32 default FPU flags
  MIPS: Makefile: Fix MIPS ASE detection code

Nicolas Schichan (1):
  MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices().

Niklas Cassel (1):
  MIPS: smp-cps: cpu_set FPU mask if FPU present

Rafał Miłecki (1):
  MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G

Ralf Baechle (3):
  MIPS: Fix cpu_has_mips_r2_exec_hazard.
  MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
  Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."

 arch/mips/Kconfig                                  |  4 +-
 arch/mips/Makefile                                 | 14 +++-
 arch/mips/bcm47xx/board.c                          |  4 +-
 arch/mips/bcm63xx/prom.c                           |  4 -
 arch/mips/bcm63xx/setup.c                          |  4 +
 arch/mips/cavium-octeon/dma-octeon.c               |  2 +-
 arch/mips/cavium-octeon/setup.c                    |  5 +-
 arch/mips/include/asm/cacheflush.h                 | 38 +++++----
 arch/mips/include/asm/cpu-features.h               | 33 +++++++-
 arch/mips/include/asm/elf.h                        |  5 ++
 .../asm/mach-cavium-octeon/cpu-feature-overrides.h |  1 -
 arch/mips/include/asm/octeon/cvmx.h                |  8 --
 arch/mips/include/asm/octeon/pci-octeon.h          |  3 -
 arch/mips/include/asm/pgtable.h                    |  9 ++-
 arch/mips/include/asm/r4kcache.h                   | 89 +++++++++++-----------
 arch/mips/include/asm/spinlock.h                   |  2 +-
 arch/mips/kernel/entry.S                           |  3 +-
 arch/mips/kernel/smp-cps.c                         |  6 ++
 arch/mips/mm/cache.c                               | 39 +++++-----
 arch/mips/mm/tlbex.c                               | 21 +----
 arch/mips/netlogic/xlp/ahci-init-xlp2.c            | 13 ++++
 arch/mips/pci/Makefile                             |  2 +-
 arch/mips/pci/pci-octeon.c                         |  8 +-
 arch/mips/pci/pcie-octeon.c                        |  8 --
 arch/mips/ralink/Kconfig                           |  5 ++
 drivers/ssb/Kconfig                                |  1 +
 26 files changed, 186 insertions(+), 145 deletions(-)

-- 
1.9.3


             reply	other threads:[~2015-05-08 14:01 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-08 12:25 Ralf Baechle [this message]
2014-11-25  9:15 ` [PATCH v2 20/23] MIPS: Kconfig: Disable SMP/CPS for 64-bit Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Kconfig: Disable SMP/CPS for 64-bit" has been added to the 4.0-stable tree gregkh
2015-01-07 11:28 ` [PATCH v2 08/23] MIPS: Netlogic: Fix for SATA PHY init Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Netlogic: Fix for SATA PHY init" has been added to the 4.0-stable tree gregkh
2015-01-15 15:41 ` [PATCH v2 19/23] MIPS: smp-cps: cpu_set FPU mask if FPU present Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: smp-cps: cpu_set FPU mask if FPU present" has been added to the 4.0-stable tree gregkh
2015-02-23  5:17 ` [PATCH v2 17/23] MIPS: ralink: Fix bad config symbol in PCI makefile Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: ralink: Fix bad config symbol in PCI makefile." has been added to the 4.0-stable tree gregkh
2015-02-23  5:17 ` [PATCH v2 18/23] MIPS: ralink: add missing symbol for RALINK_ILL_ACC Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: ralink: add missing symbol for RALINK_ILL_ACC" has been added to the 4.0-stable tree gregkh
2015-02-26 11:11 ` [PATCH v2 22/23] MIPS: asm: elf: Set O32 default FPU flags Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: asm: elf: Set O32 default FPU flags" has been added to the 4.0-stable tree gregkh
2015-02-26 13:16 ` [PATCH v2 04/23] Revert "MIPS: Remove race window in page fault handling" Ralf Baechle
2015-05-08 14:43   ` Patch "Revert "MIPS: Remove race window in page fault handling"" has been added to the 4.0-stable tree gregkh
2015-02-26 13:16 ` [PATCH v2 05/23] MIPS: Fix race condition in lazy cache flushing Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Fix race condition in lazy cache flushing." has been added to the 4.0-stable tree gregkh
2015-08-01 21:16   ` [PATCH v2 05/23] MIPS: Fix race condition in lazy cache flushing Ben Hutchings
2015-03-03 18:48 ` [PATCH v2 10/23] MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes" has been added to the 4.0-stable tree gregkh
2015-03-03 18:48 ` [PATCH v2 11/23] MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case" has been added to the 4.0-stable tree gregkh
2015-03-03 18:48 ` [PATCH v2 12/23] MIPS: kernel: entry.S: Set correct ISA level for mips_ihb Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: kernel: entry.S: Set correct ISA level for mips_ihb" has been added to the 4.0-stable tree gregkh
2015-03-04 21:08 ` [PATCH v2 02/23] MIPS: OCTEON: dma-octeon: fix OHCI USB config check Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: OCTEON: dma-octeon: fix OHCI USB config check" has been added to the 4.0-stable tree gregkh
2015-03-06 11:02 ` [PATCH v2 03/23] MIPS: OCTEON: Use correct CSR to soft reset Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: OCTEON: Use correct CSR to soft reset" has been added to the 4.0-stable tree gregkh
2015-03-10 12:30 ` [PATCH v2 09/23] MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter" has been added to the 4.0-stable tree gregkh
2015-03-12 16:00 ` [PATCH v2 01/23] MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices() Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices()." has been added to the 4.0-stable tree gregkh
2015-03-18 13:05 ` [PATCH v2 06/23] MIPS: Octeon: Remove udelay() causing huge IRQ latency Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Octeon: Remove udelay() causing huge IRQ latency" has been added to the 4.0-stable tree gregkh
2015-08-01 21:17   ` [PATCH v2 06/23] MIPS: Octeon: Remove udelay() causing huge IRQ latency Ben Hutchings
2015-03-22 15:55 ` [PATCH v2 07/23] MIPS: OCTEON: fix PCI interrupt mapping for D-Link DSR-1000N Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: OCTEON: fix PCI interrupt mapping for D-Link DSR-1000N" has been added to the 4.0-stable tree gregkh
2015-03-25 12:14 ` [PATCH v2 13/23] MIPS: Fix cpu_has_mips_r2_exec_hazard Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Fix cpu_has_mips_r2_exec_hazard." has been added to the 4.0-stable tree gregkh
2015-08-01 21:17   ` [PATCH v2 13/23] MIPS: Fix cpu_has_mips_r2_exec_hazard Ben Hutchings
2015-03-25 12:18 ` [PATCH v2 15/23] Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." Ralf Baechle
2015-05-08 14:43   ` Patch "Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."" has been added to the 4.0-stable tree gregkh
2015-03-25 12:21 ` [PATCH v2 14/23] MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard." has been added to the 4.0-stable tree gregkh
2015-08-01 21:18   ` [PATCH v2 14/23] MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard Ben Hutchings
2015-03-25 15:31 ` [PATCH v2 16/23] SSB: fix Kconfig dependencies Ralf Baechle
2015-05-08 14:43   ` Patch "SSB: fix Kconfig dependencies" has been added to the 4.0-stable tree gregkh
2015-04-01 14:01 ` [PATCH v2 21/23] MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G" has been added to the 4.0-stable tree gregkh
2015-04-02 13:42 ` [PATCH v2 23/23] MIPS: Makefile: Fix MIPS ASE detection code Ralf Baechle
2015-05-08 14:43   ` Patch "MIPS: Makefile: Fix MIPS ASE detection code" has been added to the 4.0-stable tree gregkh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1431087908.git.ralf@linux-mips.org \
    --to=ralf@linux-mips.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).