From: Pratyush Yadav <ptyadav@amazon.de>
To: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: <Takahiro.Kuwano@infineon.com>, <tkuw584924@gmail.com>,
<linux-mtd@lists.infradead.org>, <pratyush@kernel.org>,
<michael@walle.cc>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
<Bacem.Daassi@infineon.com>, Dhruva Gole <d-gole@ti.com>,
<stable@vger.kernel.org>
Subject: Re: [PATCH 1/2] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register
Date: Mon, 23 Jan 2023 15:37:00 +0100 [thread overview]
Message-ID: <mafs0v8kxb9mb.fsf_-_@amazon.de> (raw)
In-Reply-To: <20230110164703.83413-1-tudor.ambarus@linaro.org> (Tudor Ambarus's message of "Tue, 10 Jan 2023 18:47:02 +0200")
+Cc Dhruva
Hi Tudor,
On Tue, Jan 10 2023, Tudor Ambarus wrote:
> CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
> requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
> definition, stop using magic numbers and describe the missing bit fields
> in CFR5 register. This is useful for both readability and future possible
> addition of Octal STR mode support.
>
> Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
> Cc: stable@vger.kernel.org
> Reported-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> ---
> drivers/mtd/spi-nor/spansion.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> index b621cdfd506f..07fe0f6fdfe3 100644
> --- a/drivers/mtd/spi-nor/spansion.c
> +++ b/drivers/mtd/spi-nor/spansion.c
> @@ -21,8 +21,13 @@
> #define SPINOR_REG_CYPRESS_CFR3V 0x00800004
> #define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */
> #define SPINOR_REG_CYPRESS_CFR5V 0x00800006
> -#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3
> -#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0
> +#define SPINOR_REG_CYPRESS_CFR5_BIT6 BIT(6)
Perhaps comment here that this bit is reserved. Otherwise it is not
obvious what this does and why we are setting it without going through
git-blame. No need for a re-roll, I think it is fine if you add this
when applying.
> +#define SPINOR_REG_CYPRESS_CFR5_DDR BIT(1)
> +#define SPINOR_REG_CYPRESS_CFR5_OPI BIT(0)
> +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN \
> + (SPINOR_REG_CYPRESS_CFR5_BIT6 | SPINOR_REG_CYPRESS_CFR5_DDR | \
> + SPINOR_REG_CYPRESS_CFR5_OPI)
> +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS SPINOR_REG_CYPRESS_CFR5_BIT6
I would say don't fix what isn't broken. But if you do, test it. Do you
or Takahiro have a Cypress S28* flash to test this change on? If no,
then perhaps Dhruva can help here since TI uses this flash on a bunch of
their boards?
The change looks fine to me with the above comment added, I just would
like someone to test it once.
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
> #define SPINOR_OP_CYPRESS_RD_FAST 0xee
>
> /* Cypress SPI NOR flash operations. */
> --
> 2.34.1
>
>
--
Regards,
Pratyush Yadav
Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879
next prev parent reply other threads:[~2023-01-23 14:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-06 3:06 [PATCH] mtd: spi-nor: spansion: Keep CFR5V[6] as 1 in Octal DTR enable/disable tkuw584924
2023-01-06 9:47 ` Tudor Ambarus
2023-01-06 9:55 ` Tudor Ambarus
2023-01-10 4:39 ` Takahiro Kuwano
2023-01-10 16:47 ` [PATCH 1/2] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register Tudor Ambarus
2023-01-11 6:28 ` Dhruva Gole
2023-01-18 7:34 ` Takahiro Kuwano
2023-01-23 14:37 ` Pratyush Yadav [this message]
2023-01-23 16:31 ` Dhruva Gole
2023-01-24 10:43 ` Pratyush Yadav
2023-01-24 11:12 ` Dhruva Gole
2023-01-24 12:03 ` Pratyush Yadav
2023-02-01 7:14 ` Takahiro Kuwano
2023-01-31 9:00 ` Tudor Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mafs0v8kxb9mb.fsf_-_@amazon.de \
--to=ptyadav@amazon.de \
--cc=Bacem.Daassi@infineon.com \
--cc=Takahiro.Kuwano@infineon.com \
--cc=d-gole@ti.com \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
--cc=tkuw584924@gmail.com \
--cc=tudor.ambarus@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox