Re: Limit logins or connections to the same target LUN

[Gionatan Danti <g.danti@assyoma.it>]

Il 28-02-2019 16:19 Gionatan Danti ha scritto:
> Hi all,
> I would like to understand if, and how to, limit the maximum number of
> simultaneous connections (or logins) to a specific LUN (similar in how
> the "MaxSession" option worked in the old ietd).
> 
> I am exporting a LUN with a general purpose filesystem (non cluster
> aware) and I would be 100% sure that only a single machine at a time
> can mount it.
> 
> At the moment, I protected the iSCSI LUN with both an IP-based access
> list and a username/password combo, but hard limiting the maximum
> number of connections opened against it to 1 (one) would be a nice
> thing...
> 
> Also, I am aware of SCSI persistent reservations (sg_persist) but,
> while working well, they are somewhat harder to setup.
> 
> Thank you,
> regards.

Hi all,
any suggestions?

Thanks.

-- 
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti@assyoma.it - info@assyoma.it
GPG public key ID: FF5F32A8