From: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Peter Huewe <peterhuewe-Mmb7MZpHnFY@public.gmane.org>
Cc: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] tpm: drop int_queue from tpm_vendor_specific
Date: Tue, 22 Mar 2016 06:20:09 +0200 [thread overview]
Message-ID: <1458620409-15603-1-git-send-email-jarkko.sakkinen@linux.intel.com> (raw)
Drop field int_queue from tpm_vendor_specific as it is used only by
tpm_tis. Probably all of the fields should be eventually dropped and
moved to the private structures of different drivers but it is better to
do this one step at a time in order not to break anything.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/char/tpm/tpm.h | 1 -
drivers/char/tpm/tpm_i2c_nuvoton.c | 1 -
drivers/char/tpm/tpm_tis.c | 19 ++++++++++++-------
3 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index f197eef..4764545 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -148,7 +148,6 @@ struct tpm_vendor_specific {
void *priv;
wait_queue_head_t read_queue;
- wait_queue_head_t int_queue;
u16 manufacturer_id;
};
diff --git a/drivers/char/tpm/tpm_i2c_nuvoton.c b/drivers/char/tpm/tpm_i2c_nuvoton.c
index d61d43f..a43b5f3 100644
--- a/drivers/char/tpm/tpm_i2c_nuvoton.c
+++ b/drivers/char/tpm/tpm_i2c_nuvoton.c
@@ -540,7 +540,6 @@ static int i2c_nuvoton_probe(struct i2c_client *client,
return -ENOMEM;
init_waitqueue_head(&chip->vendor.read_queue);
- init_waitqueue_head(&chip->vendor.int_queue);
/* Default timeouts */
chip->vendor.timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index eed3bf5..7d7a776 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -95,6 +95,7 @@ struct tpm_info {
struct priv_data {
bool irq_tested;
+ wait_queue_head_t int_queue;
};
#if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
@@ -157,6 +158,7 @@ static void release_locality(struct tpm_chip *chip, int l, int force)
static int request_locality(struct tpm_chip *chip, int l)
{
+ struct priv_data *priv = chip->vendor.priv;
unsigned long stop, timeout;
long rc;
@@ -173,7 +175,7 @@ again:
timeout = stop - jiffies;
if ((long)timeout <= 0)
return -1;
- rc = wait_event_interruptible_timeout(chip->vendor.int_queue,
+ rc = wait_event_interruptible_timeout(priv->int_queue,
(check_locality
(chip, l) >= 0),
timeout);
@@ -249,6 +251,7 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
+ struct priv_data *priv = chip->vendor.priv;
int size = 0;
int expected, status;
@@ -279,7 +282,7 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
}
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
- &chip->vendor.int_queue, false);
+ &priv->int_queue, false);
status = tpm_tis_status(chip);
if (status & TPM_STS_DATA_AVAIL) { /* retry? */
dev_err(&chip->dev, "Error left over data\n");
@@ -304,6 +307,7 @@ MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
*/
static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
{
+ struct priv_data *priv = chip->vendor.priv;
int rc, status, burstcnt;
size_t count = 0;
@@ -315,7 +319,7 @@ static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
tpm_tis_ready(chip);
if (wait_for_tpm_stat
(chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
- &chip->vendor.int_queue, false) < 0) {
+ &priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
}
@@ -330,7 +334,7 @@ static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
}
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
- &chip->vendor.int_queue, false);
+ &priv->int_queue, false);
status = tpm_tis_status(chip);
if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
rc = -EIO;
@@ -342,7 +346,7 @@ static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
iowrite8(buf[count],
chip->vendor.iobase + TPM_DATA_FIFO(chip->vendor.locality));
wait_for_tpm_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
- &chip->vendor.int_queue, false);
+ &priv->int_queue, false);
status = tpm_tis_status(chip);
if ((status & TPM_STS_DATA_EXPECT) != 0) {
rc = -EIO;
@@ -537,6 +541,7 @@ static const struct tpm_class_ops tpm_tis = {
static irqreturn_t tis_int_handler(int dummy, void *dev_id)
{
struct tpm_chip *chip = dev_id;
+ struct priv_data *priv = chip->vendor.priv;
u32 interrupt;
int i;
@@ -556,7 +561,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
if (interrupt &
(TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
TPM_INTF_CMD_READY_INT))
- wake_up_interruptible(&chip->vendor.int_queue);
+ wake_up_interruptible(&priv->int_queue);
/* Clear interrupts handled with TPM_EOI */
iowrite32(interrupt,
@@ -773,7 +778,7 @@ static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
/* INTERRUPT Setup */
init_waitqueue_head(&chip->vendor.read_queue);
- init_waitqueue_head(&chip->vendor.int_queue);
+ init_waitqueue_head(&priv->int_queue);
if (interrupts && tpm_info->irq != -1) {
if (tpm_info->irq) {
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
--
2.7.3
------------------------------------------------------------------------------
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more.
http://pubads.g.doubleclick.net/gampad/clk?id=278785351&iu=/4140
next reply other threads:[~2016-03-22 4:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-22 4:20 Jarkko Sakkinen [this message]
[not found] ` <1458620409-15603-1-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-03-22 16:31 ` [PATCH] tpm: drop int_queue from tpm_vendor_specific Jason Gunthorpe
-- strict thread matches above, loose matches on Subject: below --
2016-03-23 7:55 [PATCH 0/3] Few st33zp24 fixes Christophe Ricard
2016-03-23 8:17 ` Jarkko Sakkinen
2016-03-23 8:21 ` Christophe Ricard
[not found] ` <56F251F2.6050709-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-03-23 21:58 ` [PATCH] tpm: drop int_queue from tpm_vendor_specific Christophe Ricard
[not found] ` <56F31170.4020702-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-03-24 13:25 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458620409-15603-1-git-send-email-jarkko.sakkinen@linux.intel.com \
--to=jarkko.sakkinen-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=peterhuewe-Mmb7MZpHnFY@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).