From: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Peter Huewe <peterhuewe-Mmb7MZpHnFY@public.gmane.org>,
Jason Gunthorpe
<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Cc: open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"moderated list:TPM DEVICE DRIVER"
<tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: [PATCH v3 3/5] tpm: return error code from tpm_gen_interrupt()
Date: Tue, 19 Jul 2016 16:32:47 +0300 [thread overview]
Message-ID: <1468935171-7815-4-git-send-email-jarkko.sakkinen@linux.intel.com> (raw)
In-Reply-To: <1468935171-7815-1-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Return error code from tpm_gen_interrupt() and fail tpm_tis family of
drivers on a system error. It doesn't make sense to continue if we
cannot even reach the TPM.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/char/tpm/tpm-interface.c | 6 +++---
drivers/char/tpm/tpm.h | 2 +-
drivers/char/tpm/tpm_tis_core.c | 4 +++-
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 88dafcd..35b2722 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -466,16 +466,16 @@ ssize_t tpm_getcap(struct tpm_chip *chip, __be32 subcap_id, cap_t *cap,
* Returns 0 on success, < 0 in case of fatal error or a value > 0 representing
* a TPM error code.
*/
-void tpm_gen_interrupt(struct tpm_chip *chip)
+int tpm_gen_interrupt(struct tpm_chip *chip)
{
const char *desc = "attempting to generate an interrupt";
u32 cap2;
cap_t cap;
if (chip->flags & TPM_CHIP_FLAG_TPM2)
- tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
+ return tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
else
- tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc);
+ return tpm_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc);
}
EXPORT_SYMBOL_GPL(tpm_gen_interrupt);
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index ec1f877..0cbb598 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -483,7 +483,7 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
ssize_t tpm_transmit_cmd(struct tpm_chip *chip, void *cmd, int len,
const char *desc);
int tpm_get_timeouts(struct tpm_chip *chip);
-void tpm_gen_interrupt(struct tpm_chip *chip);
+int tpm_gen_interrupt(struct tpm_chip *chip);
int tpm1_auto_startup(struct tpm_chip *chip);
int tpm_do_selftest(struct tpm_chip *chip);
unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index b67d225..45159e1 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -575,7 +575,9 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
/* Generate an interrupt by having the core call through to
* tpm_tis_send
*/
- tpm_gen_interrupt(chip);
+ rc = tpm_gen_interrupt(chip);
+ if (rc < 0)
+ return rc;
/* tpm_tis_send will either confirm the interrupt is working or it
* will call disable_irq which undoes all of the above.
--
2.7.4
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
next prev parent reply other threads:[~2016-07-19 13:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-19 13:32 [PATCH v3 0/5] Use tpm_transmit_cmd() consistently across kernel call sites Jarkko Sakkinen
2016-07-19 13:32 ` [PATCH v3 1/5] tpm: remove unnecessary externs from tpm.h Jarkko Sakkinen
[not found] ` <1468935171-7815-1-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-07-19 13:32 ` [PATCH v3 2/5] tpm: unify tpm_gen_interrupt() Jarkko Sakkinen
2016-07-19 13:32 ` Jarkko Sakkinen [this message]
[not found] ` <1468935171-7815-4-git-send-email-jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2016-07-19 20:27 ` [PATCH v3 3/5] tpm: return error code from tpm_gen_interrupt() Jason Gunthorpe
[not found] ` <20160719202741.GB16042-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-07-19 20:31 ` Jarkko Sakkinen
[not found] ` <20160719203147.GA26228-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-07-19 20:36 ` Jarkko Sakkinen
2016-07-19 20:39 ` [tpmdd-devel] " Jarkko Sakkinen
[not found] ` <20160719203634.GB26228-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-07-19 20:40 ` Jason Gunthorpe
2016-07-19 20:52 ` Jarkko Sakkinen
2016-07-19 13:32 ` [PATCH v3 4/5] tpm: use tpm_transmit_cmd() in tpm2_probe() Jarkko Sakkinen
2016-07-19 20:28 ` [PATCH v3 0/5] Use tpm_transmit_cmd() consistently across kernel call sites Jason Gunthorpe
2016-07-19 13:32 ` [PATCH v3 5/5] tpm: use tpm_pcr_read_dev() in tpm_do_selftest() Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468935171-7815-4-git-send-email-jarkko.sakkinen@linux.intel.com \
--to=jarkko.sakkinen-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=peterhuewe-Mmb7MZpHnFY@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).