From: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Tomas Winkler <tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 4/4] tmp/tpm_crb: implement runtime pm for tpm_crb
Date: Sat, 8 Oct 2016 15:47:08 +0300 [thread overview]
Message-ID: <20161008124708.GA10317@intel.com> (raw)
In-Reply-To: <1475927979-23484-5-git-send-email-tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
On Sat, Oct 08, 2016 at 02:59:39PM +0300, Tomas Winkler wrote:
> From: "Winkler, Tomas" <tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>
> Utilize runtime_pm for driving tpm crb idle states.
> The framework calls cmd_ready from the pm_runtime_resume handler
> and go idle from the pm_runtime_suspend handler.
> The TPM framework should wake the device before transmit and receive.
> In case the runtime_pm framework is not compiled in or enabled, the device
> will be in the permanent ready state.
>
> Signed-off-by: Tomas Winkler <tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
I would rather want the fix as a separate patch to make review + testing
easier (without and with). Thanks.
/Jarkko
> ---
> V2: new in the series
> V3: resend
> V4: fix unbalanced runtime pm put and get
>
> drivers/char/tpm/tpm-interface.c | 5 +++++
> drivers/char/tpm/tpm_crb.c | 42 ++++++++++++++++++++++++++++++++++++----
> 2 files changed, 43 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> index 8de61876f633..7743e8a21b82 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -29,6 +29,7 @@
> #include <linux/mutex.h>
> #include <linux/spinlock.h>
> #include <linux/freezer.h>
> +#include <linux/pm_runtime.h>
>
> #include "tpm.h"
> #include "tpm_eventlog.h"
> @@ -356,6 +357,8 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
> if (!(flags & TPM_TRANSMIT_UNLOCKED))
> mutex_lock(&chip->tpm_mutex);
>
> + pm_runtime_get_sync(chip->dev.parent);
> +
> rc = chip->ops->send(chip, (u8 *) buf, count);
> if (rc < 0) {
> dev_err(&chip->dev,
> @@ -397,6 +400,8 @@ out_recv:
> dev_err(&chip->dev,
> "tpm_transmit: tpm_recv: error %zd\n", rc);
> out:
> + pm_runtime_put_sync(chip->dev.parent);
> +
> if (!(flags & TPM_TRANSMIT_UNLOCKED))
> mutex_unlock(&chip->tpm_mutex);
> return rc;
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> index def50b7d47b2..eccd82af6215 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -19,6 +19,7 @@
> #include <linux/highmem.h>
> #include <linux/rculist.h>
> #include <linux/module.h>
> +#include <linux/pm_runtime.h>
> #include "tpm.h"
>
> #define ACPI_SIG_TPM2 "TPM2"
> @@ -153,8 +154,6 @@ static int __maybe_unused crb_cmd_ready(struct device *dev,
> return 0;
> }
>
> -static SIMPLE_DEV_PM_OPS(crb_pm, tpm_pm_suspend, tpm_pm_resume);
> -
> static u8 crb_status(struct tpm_chip *chip)
> {
> struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> @@ -437,11 +436,21 @@ static int crb_acpi_add(struct acpi_device *device)
> if (rc)
> return rc;
>
> + pm_runtime_get_noresume(dev);
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> +
> rc = tpm_chip_register(chip);
> - if (rc)
> + if (rc) {
> crb_go_idle(dev, priv);
> + pm_runtime_put_noidle(dev);
> + pm_runtime_disable(dev);
> + return rc;
> + }
>
> - return rc;
> + pm_runtime_put(dev);
> +
> + return 0;
> }
>
> static int crb_acpi_remove(struct acpi_device *device)
> @@ -451,9 +460,34 @@ static int crb_acpi_remove(struct acpi_device *device)
>
> tpm_chip_unregister(chip);
>
> + pm_runtime_disable(dev);
> +
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int crb_pm_runtime_suspend(struct device *dev)
> +{
> + struct tpm_chip *chip = dev_get_drvdata(dev);
> + struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> +
> + return crb_go_idle(dev, priv);
> +}
> +
> +static int crb_pm_runtime_resume(struct device *dev)
> +{
> + struct tpm_chip *chip = dev_get_drvdata(dev);
> + struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> +
> + return crb_cmd_ready(dev, priv);
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops crb_pm = {
> + SET_SYSTEM_SLEEP_PM_OPS(tpm_pm_suspend, tpm_pm_resume)
> + SET_RUNTIME_PM_OPS(crb_pm_runtime_suspend, crb_pm_runtime_resume, NULL)
> +};
> +
> static struct acpi_device_id crb_device_ids[] = {
> {"MSFT0101", 0},
> {"", 0},
> --
> 2.7.4
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
next prev parent reply other threads:[~2016-10-08 12:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-08 11:59 [PATCH v4 0/4] tpm/tpm_crb: implement power management Tomas Winkler
[not found] ` <1475927979-23484-1-git-send-email-tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 11:59 ` [PATCH v4 1/4] tpm/tpm_crb: implement tpm crb idle state Tomas Winkler
[not found] ` <1475927979-23484-2-git-send-email-tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 16:30 ` Jarkko Sakkinen
2016-10-08 11:59 ` [PATCH 2/4] tmp/tpm_crb: fix Intel PTT hw bug during " Tomas Winkler
[not found] ` <1475927979-23484-3-git-send-email-tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 12:50 ` Jarkko Sakkinen
[not found] ` <20161008125003.GB10317-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 14:27 ` Winkler, Tomas
[not found] ` <5B8DA87D05A7694D9FA63FD143655C1B542F6768-Jy8z56yoSI8MvF1YICWikbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-10-08 16:00 ` Jarkko Sakkinen
[not found] ` <20161008160006.GA25893-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 16:42 ` Jason Gunthorpe
[not found] ` <20161008164203.GB29734-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-10-08 16:58 ` Winkler, Tomas
2016-10-08 17:08 ` Jarkko Sakkinen
2016-10-08 16:56 ` Winkler, Tomas
[not found] ` <5B8DA87D05A7694D9FA63FD143655C1B542F67C8-Jy8z56yoSI8MvF1YICWikbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-10-08 17:06 ` Jarkko Sakkinen
[not found] ` <20161008170651.GA8747-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 17:27 ` Winkler, Tomas
2016-10-08 18:53 ` [tpmdd-devel] " Winkler, Tomas
2016-10-08 11:59 ` [PATCH 3/4] tpm/tpm_crb: open code the crb_init into acpi_add Tomas Winkler
2016-10-08 11:59 ` [PATCH 4/4] tmp/tpm_crb: implement runtime pm for tpm_crb Tomas Winkler
[not found] ` <1475927979-23484-5-git-send-email-tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 12:47 ` Jarkko Sakkinen [this message]
[not found] ` <20161008124708.GA10317-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 13:37 ` Winkler, Tomas
2016-10-08 16:01 ` Jarkko Sakkinen
[not found] ` <20161008160112.GB25893-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-10-08 18:18 ` Winkler, Tomas
[not found] ` <5B8DA87D05A7694D9FA63FD143655C1B542F684D-Jy8z56yoSI8MvF1YICWikbfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-10-08 18:43 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161008124708.GA10317@intel.com \
--to=jarkko.sakkinen-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).