[PATCH v3 0/3] Locality support for tpm_crb

[PATCH v3 0/3] Locality support for tpm_crb

[Jarkko Sakkinen]

The tpm_crb driver should follow the policy of reserving and
relinquishing the locality it uses when multiple localities are used,
like when TXT is another locality.

Jarkko Sakkinen (3):
  tpm_crb: map locality registers
  tpm_crb: encapsulate crb_wait_for_reg_32
  tpm_crb: request and relinquish locality 0

 drivers/char/tpm/tpm_crb.c | 185 +++++++++++++++++++++++++++++++++------------
 1 file changed, 137 insertions(+), 48 deletions(-)

-- 
v2: 
added sanity check for start address of the control area
v3:
do locality request/relinquish as part of send/recv
check priv->regs_h before using it
just assing the base address to regs_h instead of using crb_map_res
2.9.3

[PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

In order to provide access to locality registers, this commits adds
mapping of the head of the CRB registers, which are located right
before the control area.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/char/tpm/tpm_crb.c | 89 +++++++++++++++++++++++++++++-----------------
 1 file changed, 57 insertions(+), 32 deletions(-)

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 717b6b4..80b9759 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -52,18 +52,28 @@ enum crb_cancel {
 	CRB_CANCEL_INVOKE	= BIT(0),
 };
 
-struct crb_control_area {
-	u32 req;
-	u32 sts;
-	u32 cancel;
-	u32 start;
-	u32 int_enable;
-	u32 int_sts;
-	u32 cmd_size;
-	u32 cmd_pa_low;
-	u32 cmd_pa_high;
-	u32 rsp_size;
-	u64 rsp_pa;
+struct crb_regs_head {
+	u32 loc_state;
+	u32 reserved1;
+	u32 loc_ctrl;
+	u32 loc_sts;
+	u8 reserved2[32];
+	u64 intf_id;
+	u64 ctrl_ext;
+} __packed;
+
+struct crb_regs_tail {
+	u32 ctrl_req;
+	u32 ctrl_sts;
+	u32 ctrl_cancel;
+	u32 ctrl_start;
+	u32 ctrl_int_enable;
+	u32 ctrl_int_sts;
+	u32 ctrl_cmd_size;
+	u32 ctrl_cmd_pa_low;
+	u32 ctrl_cmd_pa_high;
+	u32 ctrl_rsp_size;
+	u64 ctrl_rsp_pa;
 } __packed;
 
 enum crb_status {
@@ -78,7 +88,8 @@ enum crb_flags {
 struct crb_priv {
 	unsigned int flags;
 	void __iomem *iobase;
-	struct crb_control_area __iomem *cca;
+	struct crb_regs_head __iomem *regs_h;
+	struct crb_regs_tail __iomem *regs_t;
 	u8 __iomem *cmd;
 	u8 __iomem *rsp;
 	u32 cmd_size;
@@ -104,7 +115,7 @@ static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
 	if (priv->flags & CRB_FL_ACPI_START)
 		return 0;
 
-	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req);
+	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
 	/* we don't really care when this settles */
 
 	return 0;
@@ -128,21 +139,23 @@ static int __maybe_unused crb_cmd_ready(struct device *dev,
 					struct crb_priv *priv)
 {
 	ktime_t stop, start;
+	u32 req;
 
 	if (priv->flags & CRB_FL_ACPI_START)
 		return 0;
 
-	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req);
+	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
 
 	start = ktime_get();
 	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
 	do {
-		if (!(ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY))
+		req = ioread32(&priv->regs_t->ctrl_req);
+		if (!(req & CRB_CTRL_REQ_CMD_READY))
 			return 0;
 		usleep_range(50, 100);
 	} while (ktime_before(ktime_get(), stop));
 
-	if (ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY) {
+	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY) {
 		dev_warn(dev, "cmdReady timed out\n");
 		return -ETIME;
 	}
@@ -155,7 +168,7 @@ static u8 crb_status(struct tpm_chip *chip)
 	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
 	u8 sts = 0;
 
-	if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
+	if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
 	    CRB_START_INVOKE)
 		sts |= CRB_DRV_STS_COMPLETE;
 
@@ -171,7 +184,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 	if (count < 6)
 		return -EIO;
 
-	if (ioread32(&priv->cca->sts) & CRB_CTRL_STS_ERROR)
+	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
 		return -EIO;
 
 	memcpy_fromio(buf, priv->rsp, 6);
@@ -210,7 +223,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	/* Zero the cancel register so that the next command will not get
 	 * canceled.
 	 */
-	iowrite32(0, &priv->cca->cancel);
+	iowrite32(0, &priv->regs_t->ctrl_cancel);
 
 	if (len > priv->cmd_size) {
 		dev_err(&chip->dev, "invalid command count value %zd %d\n",
@@ -224,7 +237,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	wmb();
 
 	if (priv->flags & CRB_FL_CRB_START)
-		iowrite32(CRB_START_INVOKE, &priv->cca->start);
+		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
 
 	if (priv->flags & CRB_FL_ACPI_START)
 		rc = crb_do_acpi_start(chip);
@@ -236,7 +249,7 @@ static void crb_cancel(struct tpm_chip *chip)
 {
 	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
 
-	iowrite32(CRB_CANCEL_INVOKE, &priv->cca->cancel);
+	iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
 
 	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
 		dev_err(&chip->dev, "ACPI Start failed\n");
@@ -245,7 +258,7 @@ static void crb_cancel(struct tpm_chip *chip)
 static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
 {
 	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
-	u32 cancel = ioread32(&priv->cca->cancel);
+	u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
 
 	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;
 }
@@ -322,10 +335,22 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 	if (IS_ERR(priv->iobase))
 		return PTR_ERR(priv->iobase);
 
-	priv->cca = crb_map_res(dev, priv, &io_res, buf->control_address,
-				sizeof(struct crb_control_area));
-	if (IS_ERR(priv->cca))
-		return PTR_ERR(priv->cca);
+	/* The ACPI IO region starts at the head area and continues to include
+	 * the control area, as one nice sane region except for some older
+	 * stuff that puts the control area outside the ACPI IO region.
+	 */
+	if (!(priv->flags & CRB_FL_ACPI_START)) {
+		if (buf->control_address == io_res.start +
+		    sizeof(*priv->regs_h))
+			priv->regs_h = priv->iobase;
+		else
+			dev_warn(dev, FW_BUG "Bad ACPI memory layout");
+	}
+
+	priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address,
+				   sizeof(struct crb_regs_tail));
+	if (IS_ERR(priv->regs_t))
+		return PTR_ERR(priv->regs_t);
 
 	/*
 	 * PTT HW bug w/a: wake up the device to access
@@ -335,10 +360,10 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 	if (ret)
 		return ret;
 
-	pa_high = ioread32(&priv->cca->cmd_pa_high);
-	pa_low  = ioread32(&priv->cca->cmd_pa_low);
+	pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high);
+	pa_low  = ioread32(&priv->regs_t->ctrl_cmd_pa_low);
 	cmd_pa = ((u64)pa_high << 32) | pa_low;
-	cmd_size = ioread32(&priv->cca->cmd_size);
+	cmd_size = ioread32(&priv->regs_t->ctrl_cmd_size);
 
 	dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
 		pa_high, pa_low, cmd_size);
@@ -349,9 +374,9 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 		goto out;
 	}
 
-	memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
+	memcpy_fromio(&rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
 	rsp_pa = le64_to_cpu(rsp_pa);
-	rsp_size = ioread32(&priv->cca->rsp_size);
+	rsp_size = ioread32(&priv->regs_t->ctrl_rsp_size);
 
 	if (cmd_pa != rsp_pa) {
 		priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
-- 
2.9.3


------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/xeonphi

RE: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Winkler, Tomas]

> 
> In order to provide access to locality registers, this commits adds mapping of
> the head of the CRB registers, which are located right before the control area.
> 
> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
>  drivers/char/tpm/tpm_crb.c | 89 +++++++++++++++++++++++++++++------------
> -----
>  1 file changed, 57 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index
> 717b6b4..80b9759 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -52,18 +52,28 @@ enum crb_cancel {
>  	CRB_CANCEL_INVOKE	= BIT(0),
>  };
> 
> -struct crb_control_area {
> -	u32 req;
> -	u32 sts;
> -	u32 cancel;
> -	u32 start;
> -	u32 int_enable;
> -	u32 int_sts;
> -	u32 cmd_size;
> -	u32 cmd_pa_low;
> -	u32 cmd_pa_high;
> -	u32 rsp_size;
> -	u64 rsp_pa;
> +struct crb_regs_head {
> +	u32 loc_state;
> +	u32 reserved1;
> +	u32 loc_ctrl;
> +	u32 loc_sts;
> +	u8 reserved2[32];
> +	u64 intf_id;
> +	u64 ctrl_ext;
> +} __packed;
> +

> +struct crb_regs_tail {
Why to change the name this is still control_area 
> +	u32 ctrl_req;
> +	u32 ctrl_sts;
> +	u32 ctrl_cancel;
> +	u32 ctrl_start;
> +	u32 ctrl_int_enable;
> +	u32 ctrl_int_sts;
> +	u32 ctrl_cmd_size;
> +	u32 ctrl_cmd_pa_low;
> +	u32 ctrl_cmd_pa_high;
> +	u32 ctrl_rsp_size;
> +	u64 ctrl_rsp_pa;
>  } __packed;
> 
>  enum crb_status {
> @@ -78,7 +88,8 @@ enum crb_flags {
>  struct crb_priv {
>  	unsigned int flags;
>  	void __iomem *iobase;
> -	struct crb_control_area __iomem *cca;
> +	struct crb_regs_head __iomem *regs_h;
> +	struct crb_regs_tail __iomem *regs_t;

Same here, why to change the name, let's keep it cca it will reduce the size of patch and make it more back portable. 

>  	u8 __iomem *cmd;
>  	u8 __iomem *rsp;
>  	u32 cmd_size;
> @@ -104,7 +115,7 @@ static int __maybe_unused crb_go_idle(struct device
> *dev, struct crb_priv *priv)
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		return 0;
> 
> -	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req);
> +	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
>  	/* we don't really care when this settles */
> 
>  	return 0;
> @@ -128,21 +139,23 @@ static int __maybe_unused crb_cmd_ready(struct
> device *dev,
>  					struct crb_priv *priv)
>  {
>  	ktime_t stop, start;
> +	u32 req;
> 
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		return 0;
> 
> -	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req);
> +	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
> 
>  	start = ktime_get();
>  	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
>  	do {
> -		if (!(ioread32(&priv->cca->req) &
> CRB_CTRL_REQ_CMD_READY))
> +		req = ioread32(&priv->regs_t->ctrl_req);
> +		if (!(req & CRB_CTRL_REQ_CMD_READY))
>  			return 0;
>  		usleep_range(50, 100);
>  	} while (ktime_before(ktime_get(), stop));
> 
> -	if (ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY) {
> +	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY)
> {
>  		dev_warn(dev, "cmdReady timed out\n");
>  		return -ETIME;
>  	}
> @@ -155,7 +168,7 @@ static u8 crb_status(struct tpm_chip *chip)
>  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
>  	u8 sts = 0;
> 
> -	if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
> +	if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
>  	    CRB_START_INVOKE)
>  		sts |= CRB_DRV_STS_COMPLETE;
> 
> @@ -171,7 +184,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf,
> size_t count)
>  	if (count < 6)
>  		return -EIO;
> 
> -	if (ioread32(&priv->cca->sts) & CRB_CTRL_STS_ERROR)
> +	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
>  		return -EIO;
> 
>  	memcpy_fromio(buf, priv->rsp, 6);
> @@ -210,7 +223,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
>  	/* Zero the cancel register so that the next command will not get
>  	 * canceled.
>  	 */
> -	iowrite32(0, &priv->cca->cancel);
> +	iowrite32(0, &priv->regs_t->ctrl_cancel);
> 
>  	if (len > priv->cmd_size) {
>  		dev_err(&chip->dev, "invalid command count value %zd %d\n",
> @@ -224,7 +237,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
>  	wmb();
> 
>  	if (priv->flags & CRB_FL_CRB_START)
> -		iowrite32(CRB_START_INVOKE, &priv->cca->start);
> +		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
> 
>  	if (priv->flags & CRB_FL_ACPI_START)
>  		rc = crb_do_acpi_start(chip);
> @@ -236,7 +249,7 @@ static void crb_cancel(struct tpm_chip *chip)  {
>  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> 
> -	iowrite32(CRB_CANCEL_INVOKE, &priv->cca->cancel);
> +	iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
> 
>  	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
>  		dev_err(&chip->dev, "ACPI Start failed\n"); @@ -245,7 +258,7
> @@ static void crb_cancel(struct tpm_chip *chip)  static bool
> crb_req_canceled(struct tpm_chip *chip, u8 status)  {
>  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> -	u32 cancel = ioread32(&priv->cca->cancel);
> +	u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
> 
>  	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;  }
> @@ -322,10 +335,22 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
>  	if (IS_ERR(priv->iobase))
>  		return PTR_ERR(priv->iobase);
> 
> -	priv->cca = crb_map_res(dev, priv, &io_res, buf->control_address,
> -				sizeof(struct crb_control_area));
> -	if (IS_ERR(priv->cca))
> -		return PTR_ERR(priv->cca);
> +	/* The ACPI IO region starts at the head area and continues to include
> +	 * the control area, as one nice sane region except for some older
> +	 * stuff that puts the control area outside the ACPI IO region.


This is not explained correctly.  BDW and older platforms implement  only a PC subset of the spec. 
On those platforms there are only CCA registers, other registers are not implemented. 

> +	 */
> +	if (!(priv->flags & CRB_FL_ACPI_START)) {
> +		if (buf->control_address == io_res.start +
> +		    sizeof(*priv->regs_h))
> +			priv->regs_h = priv->iobase;
> +		else
> +			dev_warn(dev, FW_BUG "Bad ACPI memory layout");
> +	}
> +
> +	priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address,
> +				   sizeof(struct crb_regs_tail));
> +	if (IS_ERR(priv->regs_t))
> +		return PTR_ERR(priv->regs_t);
> 
>  	/*
>  	 * PTT HW bug w/a: wake up the device to access @@ -335,10 +360,10
> @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
>  	if (ret)
>  		return ret;
> 
> -	pa_high = ioread32(&priv->cca->cmd_pa_high);
> -	pa_low  = ioread32(&priv->cca->cmd_pa_low);
> +	pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high);
> +	pa_low  = ioread32(&priv->regs_t->ctrl_cmd_pa_low);
>  	cmd_pa = ((u64)pa_high << 32) | pa_low;
> -	cmd_size = ioread32(&priv->cca->cmd_size);
> +	cmd_size = ioread32(&priv->regs_t->ctrl_cmd_size);
> 
>  	dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
>  		pa_high, pa_low, cmd_size);
> @@ -349,9 +374,9 @@ static int crb_map_io(struct acpi_device *device, struct
> crb_priv *priv,
>  		goto out;
>  	}
> 
> -	memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
> +	memcpy_fromio(&rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
>  	rsp_pa = le64_to_cpu(rsp_pa);
> -	rsp_size = ioread32(&priv->cca->rsp_size);
> +	rsp_size = ioread32(&priv->regs_t->ctrl_rsp_size);
> 
>  	if (cmd_pa != rsp_pa) {
>  		priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
> --
> 2.9.3

Re: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

On Mon, Dec 12, 2016 at 02:25:32PM +0000, Winkler, Tomas wrote:
> > 
> > In order to provide access to locality registers, this commits adds mapping of
> > the head of the CRB registers, which are located right before the control area.
> > 
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > ---
> >  drivers/char/tpm/tpm_crb.c | 89 +++++++++++++++++++++++++++++------------
> > -----
> >  1 file changed, 57 insertions(+), 32 deletions(-)
> > 
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index
> > 717b6b4..80b9759 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -52,18 +52,28 @@ enum crb_cancel {
> >  	CRB_CANCEL_INVOKE	= BIT(0),
> >  };
> > 
> > -struct crb_control_area {
> > -	u32 req;
> > -	u32 sts;
> > -	u32 cancel;
> > -	u32 start;
> > -	u32 int_enable;
> > -	u32 int_sts;
> > -	u32 cmd_size;
> > -	u32 cmd_pa_low;
> > -	u32 cmd_pa_high;
> > -	u32 rsp_size;
> > -	u64 rsp_pa;
> > +struct crb_regs_head {
> > +	u32 loc_state;
> > +	u32 reserved1;
> > +	u32 loc_ctrl;
> > +	u32 loc_sts;
> > +	u8 reserved2[32];
> > +	u64 intf_id;
> > +	u64 ctrl_ext;
> > +} __packed;
> > +
> 
> > +struct crb_regs_tail {
> Why to change the name this is still control_area 
> > +	u32 ctrl_req;
> > +	u32 ctrl_sts;
> > +	u32 ctrl_cancel;
> > +	u32 ctrl_start;
> > +	u32 ctrl_int_enable;
> > +	u32 ctrl_int_sts;
> > +	u32 ctrl_cmd_size;
> > +	u32 ctrl_cmd_pa_low;
> > +	u32 ctrl_cmd_pa_high;
> > +	u32 ctrl_rsp_size;
> > +	u64 ctrl_rsp_pa;
> >  } __packed;
> > 
> >  enum crb_status {
> > @@ -78,7 +88,8 @@ enum crb_flags {
> >  struct crb_priv {
> >  	unsigned int flags;
> >  	void __iomem *iobase;
> > -	struct crb_control_area __iomem *cca;
> > +	struct crb_regs_head __iomem *regs_h;
> > +	struct crb_regs_tail __iomem *regs_t;
> 
> Same here, why to change the name, let's keep it cca it will reduce the size of patch and make it more back portable. 
> 
> >  	u8 __iomem *cmd;
> >  	u8 __iomem *rsp;
> >  	u32 cmd_size;
> > @@ -104,7 +115,7 @@ static int __maybe_unused crb_go_idle(struct device
> > *dev, struct crb_priv *priv)
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		return 0;
> > 
> > -	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req);
> > +	iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
> >  	/* we don't really care when this settles */
> > 
> >  	return 0;
> > @@ -128,21 +139,23 @@ static int __maybe_unused crb_cmd_ready(struct
> > device *dev,
> >  					struct crb_priv *priv)
> >  {
> >  	ktime_t stop, start;
> > +	u32 req;
> > 
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		return 0;
> > 
> > -	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req);
> > +	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
> > 
> >  	start = ktime_get();
> >  	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
> >  	do {
> > -		if (!(ioread32(&priv->cca->req) &
> > CRB_CTRL_REQ_CMD_READY))
> > +		req = ioread32(&priv->regs_t->ctrl_req);
> > +		if (!(req & CRB_CTRL_REQ_CMD_READY))
> >  			return 0;
> >  		usleep_range(50, 100);
> >  	} while (ktime_before(ktime_get(), stop));
> > 
> > -	if (ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY) {
> > +	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY)
> > {
> >  		dev_warn(dev, "cmdReady timed out\n");
> >  		return -ETIME;
> >  	}
> > @@ -155,7 +168,7 @@ static u8 crb_status(struct tpm_chip *chip)
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >  	u8 sts = 0;
> > 
> > -	if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
> > +	if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
> >  	    CRB_START_INVOKE)
> >  		sts |= CRB_DRV_STS_COMPLETE;
> > 
> > @@ -171,7 +184,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf,
> > size_t count)
> >  	if (count < 6)
> >  		return -EIO;
> > 
> > -	if (ioread32(&priv->cca->sts) & CRB_CTRL_STS_ERROR)
> > +	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
> >  		return -EIO;
> > 
> >  	memcpy_fromio(buf, priv->rsp, 6);
> > @@ -210,7 +223,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> > size_t len)
> >  	/* Zero the cancel register so that the next command will not get
> >  	 * canceled.
> >  	 */
> > -	iowrite32(0, &priv->cca->cancel);
> > +	iowrite32(0, &priv->regs_t->ctrl_cancel);
> > 
> >  	if (len > priv->cmd_size) {
> >  		dev_err(&chip->dev, "invalid command count value %zd %d\n",
> > @@ -224,7 +237,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> > size_t len)
> >  	wmb();
> > 
> >  	if (priv->flags & CRB_FL_CRB_START)
> > -		iowrite32(CRB_START_INVOKE, &priv->cca->start);
> > +		iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
> > 
> >  	if (priv->flags & CRB_FL_ACPI_START)
> >  		rc = crb_do_acpi_start(chip);
> > @@ -236,7 +249,7 @@ static void crb_cancel(struct tpm_chip *chip)  {
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> > 
> > -	iowrite32(CRB_CANCEL_INVOKE, &priv->cca->cancel);
> > +	iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
> > 
> >  	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
> >  		dev_err(&chip->dev, "ACPI Start failed\n"); @@ -245,7 +258,7
> > @@ static void crb_cancel(struct tpm_chip *chip)  static bool
> > crb_req_canceled(struct tpm_chip *chip, u8 status)  {
> >  	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> > -	u32 cancel = ioread32(&priv->cca->cancel);
> > +	u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
> > 
> >  	return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;  }
> > @@ -322,10 +335,22 @@ static int crb_map_io(struct acpi_device *device,
> > struct crb_priv *priv,
> >  	if (IS_ERR(priv->iobase))
> >  		return PTR_ERR(priv->iobase);
> > 
> > -	priv->cca = crb_map_res(dev, priv, &io_res, buf->control_address,
> > -				sizeof(struct crb_control_area));
> > -	if (IS_ERR(priv->cca))
> > -		return PTR_ERR(priv->cca);
> > +	/* The ACPI IO region starts at the head area and continues to include
> > +	 * the control area, as one nice sane region except for some older
> > +	 * stuff that puts the control area outside the ACPI IO region.
> 
> 
> This is not explained correctly.  BDW and older platforms implement  only a PC subset of the spec. 
> On those platforms there are only CCA registers, other registers are not implemented. 

The region pointed by the TPM2 table at least in some (if not all) old
platforms I've tested is completley disjoint from the region pointed by
the ACPI device tree (SSDT in PTT's case). 

Here's example device from my x250:

Device (TPM)
{
Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
Name (_STR, Unicode ("TPM 2.0 Device"))  // _STR: Description String
Name (CRS, ResourceTemplate ()
{
Memory32Fixed (ReadOnly,
    0x00000000,         // Address Base
    0x00001000,         // Address Length
    _Y00)
Memory32Fixed (ReadOnly,
    0xFED70000,         // Address Base
    0x00001000,         // Address Length
    )
})


This is from TPM2.dsl:

[028h 0040   8]              Control Address : 00000000CCDFF000

/Jarkko

RE: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Winkler, Tomas]

> 
> I've tested is completley disjoint from the region pointed by the ACPI device
> tree (SSDT in PTT's case).
> 
> Here's example device from my x250:
> 
> Device (TPM)
> {
> Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
> Name (_STR, Unicode ("TPM 2.0 Device"))  // _STR: Description String Name
> (CRS, ResourceTemplate () { Memory32Fixed (ReadOnly,
>     0x00000000,         // Address Base
>     0x00001000,         // Address Length
>     _Y00)


I'm not sure what is that?

> Memory32Fixed (ReadOnly,
>     0xFED70000,         // Address Base
>     0x00001000,         // Address Length
>     )

But 0xFED70000 should point to CCA 

Tomas
Thanks

Re: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

On Mon, Dec 12, 2016 at 03:28:01PM +0000, Winkler, Tomas wrote:
> > 
> > I've tested is completley disjoint from the region pointed by the ACPI device
> > tree (SSDT in PTT's case).
> > 
> > Here's example device from my x250:
> > 
> > Device (TPM)
> > {
> > Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */)  // _HID: Hardware ID
> > Name (_STR, Unicode ("TPM 2.0 Device"))  // _STR: Description String Name
> > (CRS, ResourceTemplate () { Memory32Fixed (ReadOnly,
> >     0x00000000,         // Address Base
> >     0x00001000,         // Address Length
> >     _Y00)
> 
> 
> I'm not sure what is that?
> 
> > Memory32Fixed (ReadOnly,
> >     0xFED70000,         // Address Base
> >     0x00001000,         // Address Length
> >     )
> 
> But 0xFED70000 should point to CCA 

When I implemented originally the driver I followed the MS specification
and used the value from TPM2 ACPI table. 

The driver ioremaps 00000000CCDFF000, not the address from SSDT.

> Tomas
> Thanks

/Jarkko

Re: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

On Mon, Dec 12, 2016 at 05:20:01PM +0200, Jarkko Sakkinen wrote:
> On Mon, Dec 12, 2016 at 02:25:32PM +0000, Winkler, Tomas wrote:
> > > 
> > > In order to provide access to locality registers, this commits adds mapping of
> > > the head of the CRB registers, which are located right before the control area.
> > > 
> > > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > > ---
> > >  drivers/char/tpm/tpm_crb.c | 89 +++++++++++++++++++++++++++++------------
> > > -----
> > >  1 file changed, 57 insertions(+), 32 deletions(-)
> > > 
> > > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index
> > > 717b6b4..80b9759 100644
> > > --- a/drivers/char/tpm/tpm_crb.c
> > > +++ b/drivers/char/tpm/tpm_crb.c
> > > @@ -52,18 +52,28 @@ enum crb_cancel {
> > >  	CRB_CANCEL_INVOKE	= BIT(0),
> > >  };
> > > 
> > > -struct crb_control_area {
> > > -	u32 req;
> > > -	u32 sts;
> > > -	u32 cancel;
> > > -	u32 start;
> > > -	u32 int_enable;
> > > -	u32 int_sts;
> > > -	u32 cmd_size;
> > > -	u32 cmd_pa_low;
> > > -	u32 cmd_pa_high;
> > > -	u32 rsp_size;
> > > -	u64 rsp_pa;
> > > +struct crb_regs_head {
> > > +	u32 loc_state;
> > > +	u32 reserved1;
> > > +	u32 loc_ctrl;
> > > +	u32 loc_sts;
> > > +	u8 reserved2[32];
> > > +	u64 intf_id;
> > > +	u64 ctrl_ext;
> > > +} __packed;
> > > +
> > 
> > > +struct crb_regs_tail {
> > Why to change the name this is still control_area 

And how would you name struct crb_regs_h then?

In my opinion PC it makes a lot of sense to speak about registers here
rather than control area now that it is extended to the full range. The
PC Client Specification also speaks about registers.

> > > +	u32 ctrl_req;
> > > +	u32 ctrl_sts;
> > > +	u32 ctrl_cancel;
> > > +	u32 ctrl_start;
> > > +	u32 ctrl_int_enable;
> > > +	u32 ctrl_int_sts;
> > > +	u32 ctrl_cmd_size;
> > > +	u32 ctrl_cmd_pa_low;
> > > +	u32 ctrl_cmd_pa_high;
> > > +	u32 ctrl_rsp_size;
> > > +	u64 ctrl_rsp_pa;
> > >  } __packed;
> > > 
> > >  enum crb_status {
> > > @@ -78,7 +88,8 @@ enum crb_flags {
> > >  struct crb_priv {
> > >  	unsigned int flags;
> > >  	void __iomem *iobase;
> > > -	struct crb_control_area __iomem *cca;
> > > +	struct crb_regs_head __iomem *regs_h;
> > > +	struct crb_regs_tail __iomem *regs_t;
> > 
> > Same here, why to change the name, let's keep it cca it will reduce
> > the size of patch and make it more back portable. 

Backportability is a always a secondary priority for new features albeit
something that can be considered if it doesn't get in the way.

/Jarkko

Re: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

On Mon, Dec 12, 2016 at 05:31:08PM +0200, Jarkko Sakkinen wrote:
> On Mon, Dec 12, 2016 at 05:20:01PM +0200, Jarkko Sakkinen wrote:
> > On Mon, Dec 12, 2016 at 02:25:32PM +0000, Winkler, Tomas wrote:
> > > > 
> > > > In order to provide access to locality registers, this commits adds mapping of
> > > > the head of the CRB registers, which are located right before the control area.
> > > > 
> > > > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > > > ---
> > > >  drivers/char/tpm/tpm_crb.c | 89 +++++++++++++++++++++++++++++------------
> > > > -----
> > > >  1 file changed, 57 insertions(+), 32 deletions(-)
> > > > 
> > > > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index
> > > > 717b6b4..80b9759 100644
> > > > --- a/drivers/char/tpm/tpm_crb.c
> > > > +++ b/drivers/char/tpm/tpm_crb.c
> > > > @@ -52,18 +52,28 @@ enum crb_cancel {
> > > >  	CRB_CANCEL_INVOKE	= BIT(0),
> > > >  };
> > > > 
> > > > -struct crb_control_area {
> > > > -	u32 req;
> > > > -	u32 sts;
> > > > -	u32 cancel;
> > > > -	u32 start;
> > > > -	u32 int_enable;
> > > > -	u32 int_sts;
> > > > -	u32 cmd_size;
> > > > -	u32 cmd_pa_low;
> > > > -	u32 cmd_pa_high;
> > > > -	u32 rsp_size;
> > > > -	u64 rsp_pa;
> > > > +struct crb_regs_head {
> > > > +	u32 loc_state;
> > > > +	u32 reserved1;
> > > > +	u32 loc_ctrl;
> > > > +	u32 loc_sts;
> > > > +	u8 reserved2[32];
> > > > +	u64 intf_id;
> > > > +	u64 ctrl_ext;
> > > > +} __packed;
> > > > +
> > > 
> > > > +struct crb_regs_tail {
> > > Why to change the name this is still control_area 
> 
> And how would you name struct crb_regs_h then?
> 
> In my opinion PC it makes a lot of sense to speak about registers here
                ~~
Typo.

/Jarkko

RE: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Winkler, Tomas]

> > On Mon, Dec 12, 2016 at 02:25:32PM +0000, Winkler, Tomas wrote:
> > > >
> > > > In order to provide access to locality registers, this commits
> > > > adds mapping of the head of the CRB registers, which are located right
> before the control area.
> > > >
> > > > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > > > ---
> > > >  drivers/char/tpm/tpm_crb.c | 89
> > > > +++++++++++++++++++++++++++++------------
> > > > -----
> > > >  1 file changed, 57 insertions(+), 32 deletions(-)
> > > >
> > > > diff --git a/drivers/char/tpm/tpm_crb.c
> > > > b/drivers/char/tpm/tpm_crb.c index
> > > > 717b6b4..80b9759 100644
> > > > --- a/drivers/char/tpm/tpm_crb.c
> > > > +++ b/drivers/char/tpm/tpm_crb.c
> > > > @@ -52,18 +52,28 @@ enum crb_cancel {
> > > >  	CRB_CANCEL_INVOKE	= BIT(0),
> > > >  };
> > > >
> > > > -struct crb_control_area {
> > > > -	u32 req;
> > > > -	u32 sts;
> > > > -	u32 cancel;
> > > > -	u32 start;
> > > > -	u32 int_enable;
> > > > -	u32 int_sts;
> > > > -	u32 cmd_size;
> > > > -	u32 cmd_pa_low;
> > > > -	u32 cmd_pa_high;
> > > > -	u32 rsp_size;
> > > > -	u64 rsp_pa;
> > > > +struct crb_regs_head {
> > > > +	u32 loc_state;
> > > > +	u32 reserved1;
> > > > +	u32 loc_ctrl;
> > > > +	u32 loc_sts;
> > > > +	u8 reserved2[32];
> > > > +	u64 intf_id;
> > > > +	u64 ctrl_ext;
> > > > +} __packed;
> > > > +
> > >
> > > > +struct crb_regs_tail {
> > > Why to change the name this is still control_area
> 
> And how would you name struct crb_regs_h then?

Just crb_regs
 
> In my opinion PC it makes a lot of sense to speak about registers here rather
> than control area now that it is extended to the full range. The PC Client
> Specification also speaks about registers.

Right so crb_regs is to be and the nonstandard implementation of the legacy platforms should be even factored out.

> 
> > > > +	u32 ctrl_req;
> > > > +	u32 ctrl_sts;
> > > > +	u32 ctrl_cancel;
> > > > +	u32 ctrl_start;
> > > > +	u32 ctrl_int_enable;
> > > > +	u32 ctrl_int_sts;
> > > > +	u32 ctrl_cmd_size;
> > > > +	u32 ctrl_cmd_pa_low;
> > > > +	u32 ctrl_cmd_pa_high;
> > > > +	u32 ctrl_rsp_size;
> > > > +	u64 ctrl_rsp_pa;
> > > >  } __packed;
> > > >
> > > >  enum crb_status {
> > > > @@ -78,7 +88,8 @@ enum crb_flags {  struct crb_priv {
> > > >  	unsigned int flags;
> > > >  	void __iomem *iobase;
> > > > -	struct crb_control_area __iomem *cca;
> > > > +	struct crb_regs_head __iomem *regs_h;
> > > > +	struct crb_regs_tail __iomem *regs_t;
> > >
> > > Same here, why to change the name, let's keep it cca it will reduce
> > > the size of patch and make it more back portable.
> 
> Backportability is a always a secondary priority for new features albeit
> something that can be considered if it doesn't get in the way.

I think of it as a staged steps. First do the minimal fix then do the overhaul. 
Anyway you are kind of counterproductive to yourself as you already know this need a back port.

Thanks
Tomas

Re: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

On Mon, Dec 12, 2016 at 03:57:54PM +0000, Winkler, Tomas wrote:
> > > On Mon, Dec 12, 2016 at 02:25:32PM +0000, Winkler, Tomas wrote:
> > > > >
> > > > > In order to provide access to locality registers, this commits
> > > > > adds mapping of the head of the CRB registers, which are located right
> > before the control area.
> > > > >
> > > > > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > > > > ---
> > > > >  drivers/char/tpm/tpm_crb.c | 89
> > > > > +++++++++++++++++++++++++++++------------
> > > > > -----
> > > > >  1 file changed, 57 insertions(+), 32 deletions(-)
> > > > >
> > > > > diff --git a/drivers/char/tpm/tpm_crb.c
> > > > > b/drivers/char/tpm/tpm_crb.c index
> > > > > 717b6b4..80b9759 100644
> > > > > --- a/drivers/char/tpm/tpm_crb.c
> > > > > +++ b/drivers/char/tpm/tpm_crb.c
> > > > > @@ -52,18 +52,28 @@ enum crb_cancel {
> > > > >  	CRB_CANCEL_INVOKE	= BIT(0),
> > > > >  };
> > > > >
> > > > > -struct crb_control_area {
> > > > > -	u32 req;
> > > > > -	u32 sts;
> > > > > -	u32 cancel;
> > > > > -	u32 start;
> > > > > -	u32 int_enable;
> > > > > -	u32 int_sts;
> > > > > -	u32 cmd_size;
> > > > > -	u32 cmd_pa_low;
> > > > > -	u32 cmd_pa_high;
> > > > > -	u32 rsp_size;
> > > > > -	u64 rsp_pa;
> > > > > +struct crb_regs_head {
> > > > > +	u32 loc_state;
> > > > > +	u32 reserved1;
> > > > > +	u32 loc_ctrl;
> > > > > +	u32 loc_sts;
> > > > > +	u8 reserved2[32];
> > > > > +	u64 intf_id;
> > > > > +	u64 ctrl_ext;
> > > > > +} __packed;
> > > > > +
> > > >
> > > > > +struct crb_regs_tail {
> > > > Why to change the name this is still control_area
> > 
> > And how would you name struct crb_regs_h then?
> 
> Just crb_regs
>  
> > In my opinion PC it makes a lot of sense to speak about registers here rather
> > than control area now that it is extended to the full range. The PC Client
> > Specification also speaks about registers.
> 
> Right so crb_regs is to be and the nonstandard implementation of the
> legacy platforms should be even factored out.

I do not see that we would stop supporting pre-Skylake platforms in the
near future so probably won't be factored out.

/Jarkko

Re: [tpmdd-devel] [PATCH v3 1/3] tpm_crb: map locality registers

[Jarkko Sakkinen]

On Mon, Dec 12, 2016 at 07:53:06PM +0200, Jarkko Sakkinen wrote:
> On Mon, Dec 12, 2016 at 03:57:54PM +0000, Winkler, Tomas wrote:
> > > > On Mon, Dec 12, 2016 at 02:25:32PM +0000, Winkler, Tomas wrote:
> > > > > >
> > > > > > In order to provide access to locality registers, this commits
> > > > > > adds mapping of the head of the CRB registers, which are located right
> > > before the control area.
> > > > > >
> > > > > > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > > > > > ---
> > > > > >  drivers/char/tpm/tpm_crb.c | 89
> > > > > > +++++++++++++++++++++++++++++------------
> > > > > > -----
> > > > > >  1 file changed, 57 insertions(+), 32 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/char/tpm/tpm_crb.c
> > > > > > b/drivers/char/tpm/tpm_crb.c index
> > > > > > 717b6b4..80b9759 100644
> > > > > > --- a/drivers/char/tpm/tpm_crb.c
> > > > > > +++ b/drivers/char/tpm/tpm_crb.c
> > > > > > @@ -52,18 +52,28 @@ enum crb_cancel {
> > > > > >  	CRB_CANCEL_INVOKE	= BIT(0),
> > > > > >  };
> > > > > >
> > > > > > -struct crb_control_area {
> > > > > > -	u32 req;
> > > > > > -	u32 sts;
> > > > > > -	u32 cancel;
> > > > > > -	u32 start;
> > > > > > -	u32 int_enable;
> > > > > > -	u32 int_sts;
> > > > > > -	u32 cmd_size;
> > > > > > -	u32 cmd_pa_low;
> > > > > > -	u32 cmd_pa_high;
> > > > > > -	u32 rsp_size;
> > > > > > -	u64 rsp_pa;
> > > > > > +struct crb_regs_head {
> > > > > > +	u32 loc_state;
> > > > > > +	u32 reserved1;
> > > > > > +	u32 loc_ctrl;
> > > > > > +	u32 loc_sts;
> > > > > > +	u8 reserved2[32];
> > > > > > +	u64 intf_id;
> > > > > > +	u64 ctrl_ext;
> > > > > > +} __packed;
> > > > > > +
> > > > >
> > > > > > +struct crb_regs_tail {
> > > > > Why to change the name this is still control_area
> > > 
> > > And how would you name struct crb_regs_h then?
> > 
> > Just crb_regs
> >  
> > > In my opinion PC it makes a lot of sense to speak about registers here rather
> > > than control area now that it is extended to the full range. The PC Client
> > > Specification also speaks about registers.
> > 
> > Right so crb_regs is to be and the nonstandard implementation of the
> > legacy platforms should be even factored out.
> 
> I do not see that we would stop supporting pre-Skylake platforms in the
> near future so probably won't be factored out.

s/near/forseeable/

/Jarkko

[PATCH v3 2/3] tpm_crb: encapsulate crb_wait_for_reg_32

[Jarkko Sakkinen]

Encapsulated crb_wait_for_reg32() so that state changes in other CRB
registers than TPM_CRB_CTRL_REQ_x can be waited.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/char/tpm/tpm_crb.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 80b9759..853bd7b 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -121,6 +121,25 @@ static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
 	return 0;
 }
 
+static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value,
+				unsigned long timeout)
+{
+	ktime_t start;
+	ktime_t stop;
+
+	start = ktime_get();
+	stop = ktime_add(start, ms_to_ktime(timeout));
+
+	do {
+		if ((ioread32(reg) & mask) == value)
+			return true;
+
+		usleep_range(50, 100);
+	} while (ktime_before(ktime_get(), stop));
+
+	return false;
+}
+
 /**
  * crb_cmd_ready - request tpm crb device to enter ready state
  *
@@ -138,24 +157,14 @@ static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
 static int __maybe_unused crb_cmd_ready(struct device *dev,
 					struct crb_priv *priv)
 {
-	ktime_t stop, start;
-	u32 req;
-
 	if (priv->flags & CRB_FL_ACPI_START)
 		return 0;
 
 	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
-
-	start = ktime_get();
-	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
-	do {
-		req = ioread32(&priv->regs_t->ctrl_req);
-		if (!(req & CRB_CTRL_REQ_CMD_READY))
-			return 0;
-		usleep_range(50, 100);
-	} while (ktime_before(ktime_get(), stop));
-
-	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY) {
+	if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req,
+				 CRB_CTRL_REQ_CMD_READY /* mask */,
+				 0, /* value */
+				 TPM2_TIMEOUT_C)) {
 		dev_warn(dev, "cmdReady timed out\n");
 		return -ETIME;
 	}
-- 
2.9.3


------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/xeonphi

[PATCH v3 3/3] tpm_crb: request and relinquish locality 0

[Jarkko Sakkinen]

Request and relinquish locality for the driver use in order to be a
better citizen in a multi locality environment like TXT.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/char/tpm/tpm_crb.c | 73 ++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 9 deletions(-)

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 853bd7b..96f661a 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -34,6 +34,15 @@ enum crb_defaults {
 	CRB_ACPI_START_INDEX = 1,
 };
 
+enum crb_loc_ctrl {
+	CRB_LOC_CTRL_REQUEST_ACCESS	= BIT(0),
+	CRB_LOC_CTRL_RELINQUISH		= BIT(1),
+};
+
+enum crb_loc_state {
+	CRB_LOC_STATE_LOC_ASSIGNED	= BIT(1),
+};
+
 enum crb_ctrl_req {
 	CRB_CTRL_REQ_CMD_READY	= BIT(0),
 	CRB_CTRL_REQ_GO_IDLE	= BIT(1),
@@ -165,13 +174,42 @@ static int __maybe_unused crb_cmd_ready(struct device *dev,
 				 CRB_CTRL_REQ_CMD_READY /* mask */,
 				 0, /* value */
 				 TPM2_TIMEOUT_C)) {
-		dev_warn(dev, "cmdReady timed out\n");
+		dev_warn(dev, "TPM_CRB_CTRL_REQ_x.cmdReady timed out\n");
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int crb_request_locality(struct tpm_chip *chip)
+{
+	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
+
+	if (!priv->regs_h)
+		return 0;
+
+	iowrite32(CRB_LOC_CTRL_REQUEST_ACCESS, &priv->regs_h->loc_ctrl);
+	if (!crb_wait_for_reg_32(&priv->regs_h->loc_state,
+				 CRB_LOC_STATE_LOC_ASSIGNED, /* mask */
+				 CRB_LOC_STATE_LOC_ASSIGNED, /* value */
+				 TPM2_TIMEOUT_C)) {
+		dev_warn(&chip->dev, "TPM_LOC_STATE_x.requestAccess timed out\n");
 		return -ETIME;
 	}
 
 	return 0;
 }
 
+static void crb_relinquish_locality(struct tpm_chip *chip)
+{
+	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
+
+	if (!priv->regs_h)
+		return;
+
+	iowrite32(CRB_LOC_CTRL_RELINQUISH, &priv->regs_h->loc_ctrl);
+}
+
 static u8 crb_status(struct tpm_chip *chip)
 {
 	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
@@ -188,23 +226,33 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
 	unsigned int expected;
+	int rc;
 
 	/* sanity check */
 	if (count < 6)
 		return -EIO;
 
-	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
-		return -EIO;
+	rc = crb_request_locality(chip);
+	if (rc)
+		return rc;
+
+	if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR) {
+		rc = -EIO;
+		goto out;
+	}
 
 	memcpy_fromio(buf, priv->rsp, 6);
 	expected = be32_to_cpup((__be32 *) &buf[2]);
-
-	if (expected > count)
-		return -EIO;
+	if (expected > count) {
+		rc = -EIO;
+		goto out;
+	}
 
 	memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6);
 
-	return expected;
+out:
+	crb_relinquish_locality(chip);
+	return rc ? rc : expected;
 }
 
 static int crb_do_acpi_start(struct tpm_chip *chip)
@@ -227,7 +275,11 @@ static int crb_do_acpi_start(struct tpm_chip *chip)
 static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 {
 	struct crb_priv *priv = dev_get_drvdata(&chip->dev);
-	int rc = 0;
+	int rc;
+
+	rc = crb_request_locality(chip);
+	if (rc)
+		return rc;
 
 	/* Zero the cancel register so that the next command will not get
 	 * canceled.
@@ -237,7 +289,8 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	if (len > priv->cmd_size) {
 		dev_err(&chip->dev, "invalid command count value %zd %d\n",
 			len, priv->cmd_size);
-		return -E2BIG;
+		rc = -E2BIG;
+		goto out;
 	}
 
 	memcpy_toio(priv->cmd, buf, len);
@@ -251,6 +304,8 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
 	if (priv->flags & CRB_FL_ACPI_START)
 		rc = crb_do_acpi_start(chip);
 
+out:
+	crb_relinquish_locality(chip);
 	return rc;
 }
 
-- 
2.9.3


------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/xeonphi

[PATCH v3 0/3] Locality support for tpm_crb

[Jarkko Sakkinen]

The tpm_crb driver should follow the policy of reserving and
relinquishing the locality it uses when multiple localities are used,
like when TXT is another locality.

[This is a resend of v3 as this has been asked from me for a few times
 now and there wasn't anything obvious to fix.]

Jarkko Sakkinen (3):
  tpm_crb: map locality registers
  tpm_crb: encapsulate crb_wait_for_reg_32
  tpm_crb: request and relinquish locality 0

 drivers/char/tpm/tpm_crb.c | 185 +++++++++++++++++++++++++++++++++------------
 1 file changed, 137 insertions(+), 48 deletions(-)

-- 
v2: 
added sanity check for start address of the control area
v3:
do locality request/relinquish as part of send/recv
check priv->regs_h before using it
just assing the base address to regs_h instead of using crb_map_res
2.9.3


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

[PATCH v3 2/3] tpm_crb: encapsulate crb_wait_for_reg_32

[Jarkko Sakkinen]

Encapsulated crb_wait_for_reg32() so that state changes in other CRB
registers than TPM_CRB_CTRL_REQ_x can be waited.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/char/tpm/tpm_crb.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 80b9759..853bd7b 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -121,6 +121,25 @@ static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
 	return 0;
 }
 
+static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value,
+				unsigned long timeout)
+{
+	ktime_t start;
+	ktime_t stop;
+
+	start = ktime_get();
+	stop = ktime_add(start, ms_to_ktime(timeout));
+
+	do {
+		if ((ioread32(reg) & mask) == value)
+			return true;
+
+		usleep_range(50, 100);
+	} while (ktime_before(ktime_get(), stop));
+
+	return false;
+}
+
 /**
  * crb_cmd_ready - request tpm crb device to enter ready state
  *
@@ -138,24 +157,14 @@ static int __maybe_unused crb_go_idle(struct device *dev, struct crb_priv *priv)
 static int __maybe_unused crb_cmd_ready(struct device *dev,
 					struct crb_priv *priv)
 {
-	ktime_t stop, start;
-	u32 req;
-
 	if (priv->flags & CRB_FL_ACPI_START)
 		return 0;
 
 	iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
-
-	start = ktime_get();
-	stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
-	do {
-		req = ioread32(&priv->regs_t->ctrl_req);
-		if (!(req & CRB_CTRL_REQ_CMD_READY))
-			return 0;
-		usleep_range(50, 100);
-	} while (ktime_before(ktime_get(), stop));
-
-	if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY) {
+	if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req,
+				 CRB_CTRL_REQ_CMD_READY /* mask */,
+				 0, /* value */
+				 TPM2_TIMEOUT_C)) {
 		dev_warn(dev, "cmdReady timed out\n");
 		return -ETIME;
 	}
-- 
2.9.3


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot