[U-Boot] Save flash from U-Boot

[Szabolcs Sipos <labuwx@balfug.com>]

Dear Wolfgang Denk,

Unfortunately the bootloader isn't modified by the ISP, only the main firmware. If a knew that the main firmware was also covered by GPL, I would ask them but I am sure they would tell me nothing, they don't tell even my VOIP password.

Szabolcs Sipos

-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de] 
Sent: Tuesday, June 25, 2013 6:49 PM
To: Szabolcs Sipos
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] Save flash from U-Boot

Dear "Szabolcs Sipos",

In message <000301ce7196$32f25b20$98d71160$@balfug.com> you wrote:
> 
> I have a ZTE ZXV10 H201L, and want to back its flash up for future 
> recovery and for getting the VOIP settings. Since the firmware is 
> modified by the ISP, I have no access to it. It has U-Boot (with 
> serial console) but some commands are missing:

The easiest way (at least in theory) is to ask your provider for the source code.  AsU-Boot is covered by GPL, they must provide you the full source code when you request it.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Testing can show the presense of bugs, but not their absence.
                                                   -- Edsger Dijkstra