From mboxrd@z Thu Jan 1 00:00:00 1970 From: Szabolcs Sipos Date: Tue, 25 Jun 2013 19:55:38 +0200 Subject: [U-Boot] Save flash from U-Boot In-Reply-To: <20130625164908.497C7380468@gemini.denx.de> References: <000301ce7196$32f25b20$98d71160$@balfug.com> <20130625164908.497C7380468@gemini.denx.de> Message-ID: <000101ce71cd$34a620a0$9df261e0$@balfug.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang Denk, Unfortunately the bootloader isn't modified by the ISP, only the main firmware. If a knew that the main firmware was also covered by GPL, I would ask them but I am sure they would tell me nothing, they don't tell even my VOIP password. Szabolcs Sipos -----Original Message----- From: Wolfgang Denk [mailto:wd at denx.de] Sent: Tuesday, June 25, 2013 6:49 PM To: Szabolcs Sipos Cc: u-boot at lists.denx.de Subject: Re: [U-Boot] Save flash from U-Boot Dear "Szabolcs Sipos", In message <000301ce7196$32f25b20$98d71160$@balfug.com> you wrote: > > I have a ZTE ZXV10 H201L, and want to back its flash up for future > recovery and for getting the VOIP settings. Since the firmware is > modified by the ISP, I have no access to it. It has U-Boot (with > serial console) but some commands are missing: The easiest way (at least in theory) is to ask your provider for the source code. AsU-Boot is covered by GPL, they must provide you the full source code when you request it. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Testing can show the presense of bugs, but not their absence. -- Edsger Dijkstra