[U-Boot-Users] LCD Initialisation for PXA255 Custom board

[U-Boot-Users] LCD Initialisation for PXA255 Custom board

[Praveen VS]

Hello,

We have a custom board on PXA 255 .But for LCD ,the on chip LCd
controller is not being used.
The LCD is being controlled by SMASUNG LCD Controller S6B33B0A.
It is connected on Datalines D0 to D15.It is not using standarad LCD
GPIO pins of PXA255

How can this type of setup be initialised n the U-Boot
Any reference is available for initialisting this type of setup ?

Regards
Praveen

[U-Boot-Users] LCD Initialisation for PXA255 Custom board

[Wolfgang Denk]

In message <000901c4ff04$af39a840$0400a8c0@praveenvs> you wrote:
> 
> The LCD is being controlled by SMASUNG LCD Controller S6B33B0A.
...
> How can this type of setup be initialised n the U-Boot

Implement a driver for the S6B33B0A LCD controller.

> Any reference is available for initialisting this type of setup ?

See the other existing LCD drivers.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"A child is a person who can't understand why someone would give away
a perfectly good kitten."                               - Doug Larson