From: "Jaehoon Chung" <jh80.chung@samsung.com>
To: "'Henrik Grimler'" <henrik@grimler.se>, <joost@diskos.nl>,
<jh80.chung@gmail.com>, <sjg@chromium.org>,
<m.szyprowski@samsung.com>, <u-boot@lists.denx.de>,
<~postmarketos/upstreaming@lists.sr.ht>
Subject: RE: [PATCH 1/2] Revert "mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B"
Date: Fri, 10 Feb 2023 09:00:33 +0900 [thread overview]
Message-ID: <000901d93ce2$b28c12a0$17a437e0$@samsung.com> (raw)
In-Reply-To: <20230208190421.62661-2-henrik@grimler.se>
Hi,
> -----Original Message-----
> From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Henrik Grimler
> Sent: Thursday, February 9, 2023 4:04 AM
> To: joost@diskos.nl; jh80.chung@gmail.com; andy.wu@sony.com; sjg@chromium.org;
> m.szyprowski@samsung.com; u-boot@lists.denx.de; ~postmarketos/upstreaming@lists.sr.ht
> Cc: Henrik Grimler <henrik@grimler.se>
> Subject: [PATCH 1/2] Revert "mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B"
>
> This reverts commit a034ec06ff1d558bbe11d5ee05edbb4de3ee2215.
>
> Commit 4a3ea75de4c5 ("Revert "mmc: sdhci: set to INT_DATA_END when
> there are data"") reverted the alternative fix that was added for
> Exynos 4 devices, causing an error when trying to boot from an sdcard:
>
> <...>
> Loading Environment from MMC... sdhci_send_command: Timeout for status update!
> mmc fail to send stop cmd
> <...>
Thanks for sharing issue.
I will check this on Exynos Board. Frankly, I hope not to re-add QUIRK.
Because it was verified that it was working fine without SDHCI_QUIKR_BROKEN_RIB.
Best Regards,
Jaehoon Chung
>
> Re-add the quirk to allow booting from sdcards again.
>
> Signed-off-by: Henrik Grimler <henrik@grimler.se>
> ---
> drivers/mmc/s5p_sdhci.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index dee84263c3fd..3b74feae68c7 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -90,7 +90,7 @@ static int s5p_sdhci_core_init(struct sdhci_host *host)
> host->name = S5P_NAME;
>
> host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
> - SDHCI_QUIRK_32BIT_DMA_ADDR |
> + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
> SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
> host->max_clk = 52000000;
> host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
> --
> 2.30.2
next prev parent reply other threads:[~2023-02-10 0:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 19:04 [PATCH 0/2] odroid: fix boot issues on u2, xu4 and siblings Henrik Grimler
2023-02-08 19:04 ` [PATCH 1/2] Revert "mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B" Henrik Grimler
2023-02-10 0:00 ` Jaehoon Chung [this message]
2023-02-13 7:28 ` Henrik Grimler
2023-03-11 10:31 ` Henrik Grimler
2023-03-13 5:41 ` Jaehoon Chung
2023-03-13 13:02 ` Jaehoon Chung
2023-03-15 5:26 ` Andy.Wu
2023-03-23 5:18 ` Jaehoon Chung
2023-04-28 19:15 ` Henrik Grimler
2023-02-08 19:04 ` [PATCH 2/2] samsung: common: only load CROS_EC if enabled in config Henrik Grimler
2023-02-09 1:08 ` Simon Glass
2023-02-13 7:22 ` Henrik Grimler
2023-02-08 19:14 ` [PATCH 0/2] odroid: fix boot issues on u2, xu4 and siblings Henrik Grimler
2023-02-08 23:03 ` Joost van Zwieten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000901d93ce2$b28c12a0$17a437e0$@samsung.com' \
--to=jh80.chung@samsung.com \
--cc=henrik@grimler.se \
--cc=jh80.chung@gmail.com \
--cc=joost@diskos.nl \
--cc=m.szyprowski@samsung.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox