[U-Boot-Users] mpc83xx boot error

[Russell McGuire <rmcguire@videopresence.com>]

All,

I have downloaded the latest U-boot 1.3.0 dirty <a week old> and compiled it
up for a 8360E-MDS board.
I have downloaded the latest version of the DTC 1.0.0-ge1109207 today, and
compiled up a preconfigured dts file 
and burnt that into flash. Also I have downloaded denx's latest linux-git
tree 2.6.23.1 and configured it for said board.

However, when I try to boot Linux, I get an immediate error as follows:

> bootm $kerneladdr - $blobaddr
.. Bla bla standard printf.. 

Uncompressing the Kernel Image . OK
Booting using the fdt at 0xe0080000
Loading device tree to 0x007fe000, end 0x007ff432 . ERROR: fdt move failed -
must reset board to recover. Resetting the board.

I am coming at this from my experience with U-boot 1.1.2 and 1.1.6 and a 1
yr old version of the dtc compiler.
Are there new options, or less options that should be used with the dtc
compiler to avoid this error? 
I know before we had to fix the version of the blob, so perhaps I am
compiling the blob wrong? The dts file compiles fine with no warnings.

dtc -I dts -O dtb -f -V 0x10


Using this without -V 0x10 gives me a different error
dtc -I dts -O dtb -f

WARNING: could not create /chosen FDT_ERR_NOSPACE
ERROR: /chosen node create failed - must RESET the board to recover

Anybody have any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071212/eb38ff1f/attachment.htm