From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Sun, 5 Aug 2007 16:50:38 +0200 Subject: [U-Boot-Users] MAKEALL patch References: <20070805135130.2ACE3353DB4@atlas.denx.de> Message-ID: <001301c7d76f$fd1d5c50$0500a8c0@monstrone> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Wolfgang, > What is the specific bug you intend to fix here? Using ppc_8xx-size > in case CROSS_COMPILE is not set is not worse than using the native > "size" command, it seems. Actually, given the fact that the majority > supported of boards are PowerPC, it is right in most cases. > > So why do you think it should be changed? I think size utility do the same function as ppc_8xx-size. I tried 4 cross tools and the result is the same. (Logs are below) And in man page you can find: "size can automatically recognize many formats" in --target option. >From my point of view is size utility better than error message. And I think that many developers use different cross tools than ppc_8xx-. Best regards, Michal Simek microblaze at monstr u-boot-microblaze]$ ./MAKEALL xupv2p Configuring for xupv2p board... ./MAKEALL: line 351: ppc_8xx-size: command not found [microblaze at monstr u-boot-microblaze]$ ./MAKEALL xupv2p Configuring for xupv2p board... text data bss dec hex filename 89326 21479 214916 325721 4f859 ./u-boot [microblaze at monstr u-boot-microblaze]$ size u-boot text data bss dec hex filename 89326 21479 214916 325721 4f859 u-boot [microblaze at monstr u-boot-microblaze]$ microblaze-uclinux-size u-boot text data bss dec hex filename 89326 21479 214916 325721 4f859 u-boot [microblaze at monstr u-boot-microblaze]$ powerpc-405-linux-gnu-size u-boot text data bss dec hex filename 89326 21479 214916 325721 4f859 u-boot [microblaze at monstr u-boot-microblaze]$ [microblaze at monstr bin]$ powerpc-linux-uclibc-size u-boot text data bss dec hex filename 89326 21479 214916 325721 4f859 u-boot [microblaze at monstr bin]$