public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Michal Simek <monstr@seznam.cz>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 2/4] emaclite
Date: Sun, 5 Aug 2007 20:56:28 +0200	[thread overview]
Message-ID: <001801c7d792$54b4ca80$0500a8c0@monstrone> (raw)
In-Reply-To: 0a6b01c7d77e$905d8e50$0500a8c0@monstrone

Signed-off-by: Michal Simek <monstr@monstr.eu>

Emaclite driver for Microblaze

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index e69de29..99e7035 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -0,0 +1,378 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <config.h>
+#include <asm/io.h>
+
+#ifdef XILINX_EMACLITE_BASEADDR
+
+#undef DEBUG
+
+#define ENET_MAX_MTU  PKTSIZE
+#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
+#define ENET_ADDR_LENGTH 6
+
+/* EmacLite constants */
+#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
+#define XEL_TPLR_OFFSET  0x07F4 /* Tx packet length */
+#define XEL_TSR_OFFSET  0x07FC /* Tx status */
+#define XEL_RSR_OFFSET  0x17FC /* Rx status */
+#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
+
+/* Xmit complete */
+#define XEL_TSR_XMIT_BUSY_MASK  0x00000001UL
+/* Xmit interrupt enable bit */
+#define XEL_TSR_XMIT_IE_MASK  0x00000008UL
+/* Buffer is active, SW bit only */
+#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
+/* Program the MAC address */
+#define XEL_TSR_PROGRAM_MASK  0x00000002UL
+/* define for programming the MAC address into the EMAC Lite */
+#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | 
XEL_TSR_PROGRAM_MASK)
+
+/* Transmit packet length upper byte */
+#define XEL_TPLR_LENGTH_MASK_HI  0x0000FF00UL
+/* Transmit packet length lower byte */
+#define XEL_TPLR_LENGTH_MASK_LO  0x000000FFUL
+
+/* Recv complete */
+#define XEL_RSR_RECV_DONE_MASK  0x00000001UL
+/* Recv interrupt enable bit */
+#define XEL_RSR_RECV_IE_MASK  0x00000008UL
+
+typedef struct {
+ unsigned int BaseAddress; /* Base address for device (IPIF) */
+ unsigned int NextTxBufferToUse; /* Next TX buffer to write to */
+ unsigned int NextRxBufferToUse; /* Next RX buffer to read from */
+ unsigned char DeviceId;  /* Unique ID of device - for future */
+} XEmacLite;
+
+static XEmacLite EmacLite;
+
+static char etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */
+
+/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
+#ifdef CFG_ENV_IS_NOWHERE
+static u8 EMACAddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 
0x01 };
+#endif
+
+void XEmacLite_AlignedRead (u32 * SrcPtr, void *DestPtr, unsigned 
ByteCount)
+{
+ unsigned i;
+ unsigned Length = ByteCount;
+ u32 AlignBuffer;
+ u32 *To32Ptr;
+ u32 *From32Ptr;
+ u8 *To8Ptr;
+ u8 *From8Ptr;
+
+ From32Ptr = (u32 *) SrcPtr;
+
+ /* Word aligned buffer, no correction needed. */
+ To32Ptr = (u32 *) DestPtr;
+ while (Length > 3) {
+  *To32Ptr++ = *From32Ptr++;
+  Length -= 4;
+ }
+ To8Ptr = (u8 *) To32Ptr;
+
+ AlignBuffer = *From32Ptr++;
+ From8Ptr = (u8 *) & AlignBuffer;
+
+ for (i = 0; i < Length; i++) {
+  *To8Ptr++ = *From8Ptr++;
+ }
+}
+
+void XEmacLite_AlignedWrite (void *SrcPtr, u32 * DestPtr, unsigned 
ByteCount)
+{
+ unsigned i;
+ unsigned Length = ByteCount;
+ u32 AlignBuffer;
+ u32 *To32Ptr;
+ u32 *From32Ptr;
+ u8 *To8Ptr;
+ u8 *From8Ptr;
+ To32Ptr = DestPtr;
+
+ From32Ptr = (u32 *) SrcPtr;
+ while (Length > 3) {
+
+  *To32Ptr++ = *From32Ptr++;
+  Length -= 4;
+ }
+
+ AlignBuffer = 0;
+ To8Ptr = (u8 *) & AlignBuffer;
+ From8Ptr = (u8 *) From32Ptr;
+
+ for (i = 0; i < Length; i++) {
+  *To8Ptr++ = *From8Ptr++;
+ }
+
+ *To32Ptr++ = AlignBuffer;
+}
+
+void eth_halt (void)
+{
+#ifdef DEBUG
+ puts ("eth_halt\n");
+#endif
+}
+
+int eth_init (bd_t * bis)
+{
+#ifdef DEBUG
+ puts ("EmacLite Initialization Started\n");
+#endif
+ memset (&EmacLite, 0, sizeof (XEmacLite));
+ EmacLite.BaseAddress = XILINX_EMACLITE_BASEADDR;
+
+#ifdef CFG_ENV_IS_NOWHERE
+ memcpy (bis->bi_enetaddr, EMACAddr, ENET_ADDR_LENGTH);
+#endif
+/*
+ * TX - TX_PING & TX_PONG initialization
+ */
+ /* Restart PING TX */
+ out_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET, 0);
+ /* Copy MAC address */
+ XEmacLite_AlignedWrite (bis->bi_enetaddr,
+  EmacLite.BaseAddress, ENET_ADDR_LENGTH);
+ /* Set the length */
+ out_be32 (EmacLite.BaseAddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ /* Update the MAC address in the EMAC Lite */
+ out_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
+ /* Wait for EMAC Lite to finish with the MAC address update */
+ while ((in_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET) &
+  XEL_TSR_PROG_MAC_ADDR) != 0) ;
+
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+ /* The same operation with PONG TX */
+ out_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
+ XEmacLite_AlignedWrite (bis->bi_enetaddr,
+  EmacLite.BaseAddress + XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (EmacLite.BaseAddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
+  XEL_TSR_PROG_MAC_ADDR);
+ while ((in_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET +
+   XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
+#endif
+
+/*
+ * RX - RX_PING & RX_PONG initialization
+ */
+ /* Write out the value to flush the RX buffer */
+ out_be32 (EmacLite.BaseAddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
+#ifdef XILINX_EMACLITE_RX_PING_PONG
+ out_be32 (EmacLite.BaseAddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
+  XEL_RSR_RECV_IE_MASK);
+#endif
+
+#ifdef DEBUG
+ puts ("EmacLite Initialization complete\n");
+#endif
+ return 0;
+}
+
+int XEmacLite_TxBufferAvailable (XEmacLite * InstancePtr)
+{
+ u32 Register;
+ u32 TxPingBusy;
+ u32 TxPongBusy;
+ /*
+  * Read the other buffer register
+  * and determine if the other buffer is available
+  */
+ Register = in_be32 (InstancePtr->BaseAddress +
+   InstancePtr->NextTxBufferToUse + 0);
+ TxPingBusy = ((Register & XEL_TSR_XMIT_BUSY_MASK) ==
+   XEL_TSR_XMIT_BUSY_MASK);
+
+ Register = in_be32 (InstancePtr->BaseAddress +
+   (InstancePtr->NextTxBufferToUse ^ XEL_TSR_OFFSET) + 0);
+ TxPongBusy = ((Register & XEL_TSR_XMIT_BUSY_MASK) ==
+   XEL_TSR_XMIT_BUSY_MASK);
+
+ return (!(TxPingBusy && TxPongBusy));
+}
+
+int eth_send (volatile void *ptr, int len) {
+
+ unsigned int Register;
+ unsigned int BaseAddress;
+
+ unsigned maxtry = 1000;
+
+ if (len > ENET_MAX_MTU)
+  len = ENET_MAX_MTU;
+
+ while (!XEmacLite_TxBufferAvailable (&EmacLite) && maxtry) {
+  udelay (10);
+  maxtry--;
+ }
+
+ if (!maxtry) {
+  printf ("Error: Timeout waiting for ethernet TX buffer\n");
+  /* Restart PING TX */
+  out_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET, 0);
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+  out_be32 (EmacLite.BaseAddress + XEL_TSR_OFFSET +
+  XEL_BUFFER_OFFSET, 0);
+#endif
+  return 0;
+ }
+
+ /* Determine the expected TX buffer address */
+ BaseAddress = (EmacLite.BaseAddress + EmacLite.NextTxBufferToUse);
+
+ /* Determine if the expected buffer address is empty */
+ Register = in_be32 (BaseAddress + XEL_TSR_OFFSET);
+ if (((Register & XEL_TSR_XMIT_BUSY_MASK) == 0)
+  && ((in_be32 ((BaseAddress) + XEL_TSR_OFFSET)
+   & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+  EmacLite.NextTxBufferToUse ^= XEL_BUFFER_OFFSET;
+#endif
+#ifdef DEBUG
+  printf ("Send packet from 0x%x\n", BaseAddress);
+#endif
+  /* Write the frame to the buffer */
+  XEmacLite_AlignedWrite (ptr, (u32 *) BaseAddress, len);
+  out_be32 (BaseAddress + XEL_TPLR_OFFSET,(len &
+   (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+  Register = in_be32 (BaseAddress + XEL_TSR_OFFSET);
+  Register |= XEL_TSR_XMIT_BUSY_MASK;
+  if ((Register & XEL_TSR_XMIT_IE_MASK) != 0) {
+   Register |= XEL_TSR_XMIT_ACTIVE_MASK;
+  }
+  out_be32 (BaseAddress + XEL_TSR_OFFSET, Register);
+  return 1;
+ }
+#ifdef XILINX_EMACLITE_TX_PING_PONG
+ /* Switch to second buffer */
+ BaseAddress ^= XEL_BUFFER_OFFSET;
+ /* Determine if the expected buffer address is empty */
+ Register = in_be32 (BaseAddress + XEL_TSR_OFFSET);
+ if (((Register & XEL_TSR_XMIT_BUSY_MASK) == 0)
+  && ((in_be32 ((BaseAddress) + XEL_TSR_OFFSET)
+   & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+#ifdef DEBUG
+  printf ("Send packet from 0x%x\n", BaseAddress);
+#endif
+  /* Write the frame to the buffer */
+  XEmacLite_AlignedWrite (ptr, (u32 *) BaseAddress, len);
+  out_be32 (BaseAddress + XEL_TPLR_OFFSET,(len &
+   (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+  Register = in_be32 (BaseAddress + XEL_TSR_OFFSET);
+  Register |= XEL_TSR_XMIT_BUSY_MASK;
+  if ((Register & XEL_TSR_XMIT_IE_MASK) != 0) {
+   Register |= XEL_TSR_XMIT_ACTIVE_MASK;
+  }
+  out_be32 (BaseAddress + XEL_TSR_OFFSET, Register);
+  return 1;
+ }
+#endif
+ puts ("Error while sending frame\n");
+ return 0;
+}
+
+int eth_rx (void)
+{
+ unsigned int Length;
+ unsigned int Register;
+ unsigned int BaseAddress;
+
+ BaseAddress = EmacLite.BaseAddress + EmacLite.NextRxBufferToUse;
+ Register = in_be32 (BaseAddress + XEL_RSR_OFFSET);
+#ifdef DEBUG
+ printf ("Testing data at address 0x%x\n", BaseAddress);
+#endif
+ if ((Register & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+#ifdef XILINX_EMACLITE_RX_PING_PONG
+  EmacLite.NextRxBufferToUse ^= XEL_BUFFER_OFFSET;
+#endif
+ } else {
+#ifndef XILINX_EMACLITE_RX_PING_PONG
+#ifdef DEBUG
+  printf ("No data was available - address 0x%x\n", BaseAddress);
+#endif
+  return 0;
+#else
+  BaseAddress ^= XEL_BUFFER_OFFSET;
+  Register = in_be32 (BaseAddress + XEL_RSR_OFFSET);
+  if ((Register & XEL_RSR_RECV_DONE_MASK) !=
+     XEL_RSR_RECV_DONE_MASK) {
+#ifdef DEBUG
+   printf ("No data was available - address 0x%x\n",
+     BaseAddress);
+#endif
+   return 0;
+  }
+#endif
+ }
+ /* Get the length of the frame that arrived */
+ switch(((in_be32(BaseAddress + XEL_RXBUFF_OFFSET + 0xC)) &
+   0xFFFF0000 ) >> 16) {
+  case 0x806:
+   Length = 42 + 20; /* FIXME size of ARP */
+#ifdef DEBUG
+   puts ("ARP Packet\n");
+#endif
+   break;
+  case 0x800:
+   Length = 14 + 14 +
+   (((in_be32(BaseAddress + XEL_RXBUFF_OFFSET + 0x10)) &
+   0xFFFF0000) >> 16); /* FIXME size of IP packet */
+#ifdef DEBUG
+   puts("IP Packet\n");
+#endif
+   break;
+  default:
+#ifdef DEBUG
+   puts("Other Packet\n");
+#endif
+   Length = ENET_MAX_MTU;
+   break;
+ }
+
+ XEmacLite_AlignedRead ((BaseAddress + XEL_RXBUFF_OFFSET),
+   etherrxbuff, Length);
+
+ /* Acknowledge the frame */
+ Register = in_be32 (BaseAddress + XEL_RSR_OFFSET);
+ Register &= ~XEL_RSR_RECV_DONE_MASK;
+ out_be32 (BaseAddress + XEL_RSR_OFFSET, Register);
+
+#ifdef DEBUG
+ printf ("Packet receive from 0x%x, length %dB\n", BaseAddress, Length);
+#endif
+ NetReceive ((uchar *) etherrxbuff, Length);
+ return 1;
+
+}
+#endif

  parent reply	other threads:[~2007-08-05 18:56 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-05 13:38 [U-Boot-Users] Microblaze: PULL request Michal Simek
2007-08-05 14:47 ` Grant Likely
2007-08-05 14:52   ` Grant Likely
2007-08-05 15:13   ` Michal Simek
2007-08-05 16:12     ` Grant Likely
2007-08-05 16:34       ` Michal Simek
2007-08-05 18:56         ` [U-Boot-Users] [PATCH 1/4] emac Michal Simek
2007-08-05 20:07           ` Wolfgang Denk
2007-08-06 20:11             ` Michal Simek
2007-08-05 22:28           ` Grant Likely
2007-08-05 18:56         ` Michal Simek [this message]
2007-08-05 20:05           ` [U-Boot-Users] [PATCH 2/4] emaclite Wolfgang Denk
2007-08-06 20:00             ` Michal Simek
2007-08-06 20:54               ` Wolfgang Denk
2007-08-05 18:56         ` [U-Boot-Users] [PATCH 3/4] microblaze changes Michal Simek
2007-08-05 20:08           ` Wolfgang Denk
2007-08-05 18:56         ` [U-Boot-Users] [PATCH 4/4] romfs Michal Simek
2007-08-05 20:38           ` Wolfgang Denk
2007-08-05 20:01         ` [U-Boot-Users] Microblaze: PULL request Wolfgang Denk
2007-08-05 22:25           ` Grant Likely
2007-08-05 22:27             ` Wolfgang Denk
2007-08-05 22:32               ` Grant Likely
2007-08-06 17:03                 ` Michal Simek
2007-08-05 19:59     ` Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='001801c7d792$54b4ca80$0500a8c0@monstrone' \
    --to=monstr@seznam.cz \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox