[U-Boot] Set TEXT_BASE via <project>.h file?

[A. Geisreiter <ageisreiter@dh-electronics.de>]

Hi Wolfgang,

>> Thanks for the fast response.
>> I have tried you're suggestion, but then U-Boot doesn't start. But I
don't
>> get an compiler error. What could be the problem? 
>> I work with an PXA270 CPU and TEXT_BASE defines the base address of the
RAM
>> copy monitor code.

> remote diagnosis is always difficult. ;-)
> Did you issue a "make mrproper", re-configure and the rebuild?
> For Coldfire targets I had some problems that all objects originating
> from C sources were correctly rebuilt after changing <project>.h, but
> not the objects originating from assembler sources. In the case of
> Coldfire, TEXT_BASE is also used in the assembler CPU startup code, so
> this would lead to the exact problem you describe...

> Currently I have no other ideas.

"make mrproper" sadly also not help. So I must search a little bit, but
thanks for your help. 

Regards,
Andreas