From: Stephen Johnson <steve@research.panasonic.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Problems accessing flash on OMAP 1510 Innovator
Date: Tue, 12 Oct 2004 12:15:56 -0400 [thread overview]
Message-ID: <002101c4b076$c0ee78e0$bb01a996@CLOYDWIN2K> (raw)
I'm trying to install and run u-boot in an OMAP Innovator 1510 board. I've
downloaded the CVS version of u-boot, configured it with "make
omap1510inn_config" and compiled it with no problem. It's installed in the
flash and runs. The problem is the flash can't be found -- on startup up
Flash: 0 kB is reported and I can't save anything. Other flash accesses are
similar. Sample output follows where I've powered on the board, run
"flinfo", and tried to do a "saveenv".
Any help would be appreciated.
Steve
--------------------------------------------------------------------
U-Boot 1.1.2 (Oct 8 2004 - 16:03:40)
U-Boot code: 11080000 -> 110953A8 BSS: -> 110998E8
RAM Configuration:
Bank #0: 10000000 32 MB
Flash: 0 kB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
OMAP1510 Innovator # flinfo
Bank # 1: missing or unknown FLASH type
OMAP1510 Innovator # setenv bootdelay 10
OMAP1510 Innovator # printenv
bootargs=console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp
bootcmd=bootp;tftp;bootm
baudrate=115200
autoload=n
stdin=serial
stdout=serial
stderr=serial
bootdelay=10
Environment size: 170/131068 bytes
OMAP1510 Innovator # saveenv
Saving Environment to Flash...
Error: start and/or end address not on sector boundary
OMAP1510 Innovator #
next reply other threads:[~2004-10-12 16:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-12 16:15 Stephen Johnson [this message]
2004-10-12 19:09 ` [U-Boot-Users] Problems accessing flash on OMAP 1510 Innovator George G. Davis
2004-10-13 13:59 ` Stephen Johnson
-- strict thread matches above, loose matches on Subject: below --
2004-10-12 16:31 Woodruff, Richard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002101c4b076$c0ee78e0$bb01a996@CLOYDWIN2K' \
--to=steve@research.panasonic.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox