From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andy Hawkins <a.hawkins@cabletime.com>
Date: Fri, 10 Jun 2005 10:46:46 +0100
Subject: [U-Boot-Users] Problem transferring file using kermit
Message-ID: <002101c56da1$536dbc70$153335bf@cabletime.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,

I am trying to transfer a file to u-boot using kermit under linux.

I am using the following in kermit:

set line /dev/ttyS1
set speed 115200
set carrier-watch off
set handshake none
set flow-control none
robust
set file type bin
set file name lit
set rec pack 1000
set send pack 1000
set window 5

connect
(I type "loadb 40000 CR")
CTRL-\ C
send /bin update_eeprom.bin

At this point, the file transfer screen appears, and all I get is the error
count going up by 2 every 8 seconds or so.

Can anyone offer any assistance? I've checked in the manual, and all it says
is to ensure that kermit is set up as above.

I have previously managed to transfer files using loadb using Hyperterminal,
so I know that the serial port and everything is working correctly.

Can anyone offer any assistance?

Thanks

Andy