From: Ara Avanesyan <araav@hylink.am>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Re: PCI, Ethernet, IXDP425
Date: Wed, 12 Jan 2005 11:41:16 +0400 [thread overview]
Message-ID: <002501c4f87a$199fad10$1000000a@araav> (raw)
In-Reply-To: 698a2fda050111224157cccdf9@mail.gmail.com
Thanks Rodel,
I think we'll switch to one supported by u-boot right now, as poritng will
take a long time.
Ok, I'm going to play with u-boot's net paramters.
Thanks,
Ara
----- Original Message -----
From: "Rodel Miguel" <rodelfmiguel@gmail.com>
To: "Ara Avanesyan" <araav@hylink.am>
Cc: "Wolfgang Denk" <wd@denx.de>; <u-boot-users@lists.sourceforge.net>
Sent: Wednesday, January 12, 2005 10:41 AM
Subject: Re: [U-Boot-Users] Re: PCI, Ethernet, IXDP425
> Ara,
>
> If you see the driver for your PCI Ethernet card on the drivers
> directory, then you'll be fine. However, you may need to write your
> own driver if it does not exist. So check on the drivers directory
> first and then, if it exists, write the appropriate CFG parameter on
> the configs/ixdp425.h file. try removing the ~CFG_CMD_NET, and other
> parameters that the driver might require.
>
> Regards,
> Rodel
>
> P.S. Anyone working on ethernet MAC's with MII-only interfaces??? I'm
> actually lost... Please help.
>
> On Wed, 12 Jan 2005 10:18:28 +0400, Ara Avanesyan <araav@hylink.am> wrote:
>> Thanks for so helpful and informative reply.
>>
>> configs/ixdp425.h, line 59:
>> #define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
>>
>> So how about checking the code before posting?;-)
>>
>> Thanks,
>> Ara
>>
>> ----- Original Message -----
>> From: "Wolfgang Denk" <wd@denx.de>
>> To: "Ara Avanesyan" <araav@hylink.am>
>> Cc: <u-boot-users@lists.sourceforge.net>
>> Sent: Wednesday, January 12, 2005 2:40 AM
>> Subject: Re: [U-Boot-Users] PCI, Ethernet, IXDP425
>>
>> > In message <002d01c4f7bf$e180b7e0$1000000a@araav> you wrote:
>> >>
>> >> I have a PCI Ethernet card on the board. I need to connect to the
>> >> network
>> >> from u-boot via this device.
>> >
>> > Just do it.
>> >
>> >> Are there any ways to do so? What I will have to do to enable this
>> >> support?
>> >> Or at least are there ANY PCI Ethernet drivers in u-boot?
>> >
>> > How about checking the code before posting?
>> >
>> > Yes, there are.
>> >
>> > Best regards,
>> >
>> > Wolfgang Denk
>> >
>> > --
>> > Software Engineering: Embedded and Realtime Systems, Embedded Linux
>> > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
>> > "Confound these ancestors.... They've stolen our best ideas!"
>> > - Ben Jonson
>> >
>>
>> -------------------------------------------------------
>> The SF.Net email is sponsored by: Beat the post-holiday blues
>> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
>> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
>> _______________________________________________
>> U-Boot-Users mailing list
>> U-Boot-Users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>>
>
next prev parent reply other threads:[~2005-01-12 7:41 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-11 9:28 [U-Boot-Users] PCI, Ethernet, IXDP425 Ara Avanesyan
2005-01-11 22:40 ` Wolfgang Denk
2005-01-12 6:18 ` [U-Boot-Users] " Ara Avanesyan
2005-01-12 6:41 ` Rodel Miguel
2005-01-12 7:41 ` Ara Avanesyan [this message]
2005-01-12 8:08 ` Ing.Gianfranco Morandi
2005-01-12 9:01 ` Wolfgang Denk
2005-01-12 9:32 ` Ara Avanesyan
2005-01-12 10:13 ` Anders Larsen
2005-01-12 14:16 ` Wolfgang Denk
2005-01-12 14:16 ` Wolfgang Denk
2005-01-12 15:07 ` Ara Avanesyan
-- strict thread matches above, loose matches on Subject: below --
2003-11-12 17:23 [U-Boot-Users] [PATCH] fix the ARM memory layout Anders Larsen
2003-11-12 19:52 ` Kyle Harris
2003-11-13 9:14 ` Anders Larsen
2003-11-13 14:19 ` Kyle Harris
2003-11-21 3:52 ` Kyle Harris
2003-11-21 7:47 ` Anders Larsen
2003-11-21 8:13 ` Wolfgang Denk
2003-12-07 0:17 ` Wolfgang Denk
2003-12-07 17:03 ` Anders Larsen
2004-01-09 11:14 ` Anders Larsen
2004-02-08 19:36 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002501c4f87a$199fad10$1000000a@araav' \
--to=araav@hylink.am \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox