* [U-Boot-Users] How to make printf work?
@ 2005-08-31 13:51 zhangwk
0 siblings, 0 replies; only message in thread
From: zhangwk @ 2005-08-31 13:51 UTC (permalink / raw)
To: u-boot
Hi friends:
I am using u-boot.1.1.3 on my mpc8540 board now.When the u-boot code is running,printf() can not output any infomation even a single charactor,but puts() can.If printf() is not used,the monitor prompt "=>" is ok.I think both DDR and LBC are working well,maybe there is something wrong with the init_ram(cache)?
Regards,
zhangwk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050831/1ff8d7f9/attachment.htm
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-08-31 13:51 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-31 13:51 [U-Boot-Users] How to make printf work? zhangwk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox