From: Ulf Samuelsson <ulf@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Proposal for patch to configurenetwork parameters
Date: Sat, 21 Apr 2007 08:17:23 +0200 [thread overview]
Message-ID: <004801c783dd$567ca990$01c4af0a@Glamdring> (raw)
In-Reply-To: 20070421003117.8F2583535D2@atlas.denx.de
>> No, I think you need to understand my situation.
>
> I think I do. Been there, done that before.
>
>> This configuration is only used at initial production to get access to
>> the
>> tftp server
>
> There are easier ways to get there.
>
>> They are not separated, both networking and environment are but examples
>> on how you can use the patch.
>> None of them are part of the patch.
>
> In fact you can use this to modify U-Boot in arbitray ways,
No I can use it for *configuring* it in a different way than available
with the current board configs.
By the rules of the game, any such additions becomes GPL.
I guess this means that you would be against configuring U-boot with Eclipse
as well...
> without
> allowing a user who looks at the source code to see what's going on.
> If this is your intention, than the patch is evil, as it inherently
> opens doors and gates for GPL violations.
>
> I say no.
>
There is already a wide open door for GPL violations called "editing the
source"
so this does not change anything.
Just makes life difficult for people with honest intentions.
Best Regards
Ulf Samuelsson
next prev parent reply other threads:[~2007-04-21 6:17 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-20 19:22 [U-Boot-Users] Proposal for patch to configure network parameters Ulf Samuelsson
2007-04-20 20:40 ` Timur Tabi
2007-04-20 20:49 ` Wolfgang Denk
2007-04-20 20:55 ` Ben Warren
2007-04-20 21:51 ` [U-Boot-Users] Proposal for patch to configurenetwork parameters Ulf Samuelsson
2007-04-20 23:12 ` Wolfgang Denk
2007-04-20 23:39 ` Ulf Samuelsson
2007-04-21 0:31 ` Wolfgang Denk
2007-04-21 6:07 ` Ulf Samuelsson
2007-04-21 6:17 ` Ulf Samuelsson [this message]
2007-04-22 19:56 ` Timur Tabi
2007-04-22 20:25 ` Wolfgang Denk
2007-04-22 20:30 ` Timur Tabi
2007-04-22 21:27 ` Ulf Samuelsson
2007-04-20 21:59 ` [U-Boot-Users] Proposal for patch to configure network parameters Ulf Samuelsson
2007-04-20 23:14 ` Wolfgang Denk
2007-04-20 23:46 ` [U-Boot-Users] Proposal for patch to configure networkparameters Ulf Samuelsson
2007-04-20 20:47 ` [U-Boot-Users] Proposal for patch to configure network parameters Wolfgang Denk
2007-04-20 21:35 ` [U-Boot-Users] Proposal for patch to configure networkparameters Ulf Samuelsson
2007-04-20 22:59 ` Wolfgang Denk
2007-04-20 23:29 ` Ulf Samuelsson
2007-04-21 0:25 ` Wolfgang Denk
2007-04-21 6:05 ` Ulf Samuelsson
2007-04-21 10:37 ` Robert Schwebel
2007-04-22 5:30 ` Ulf Samuelsson
2007-04-22 7:27 ` Robert Schwebel
2007-04-22 8:45 ` Ulf Samuelsson
2007-04-22 11:05 ` Wolfgang Denk
2007-04-22 13:16 ` Ulf Samuelsson
2007-04-22 13:58 ` Wolfgang Denk
2007-04-22 14:28 ` Ulf Samuelsson
2007-04-22 18:48 ` Wolfgang Denk
2007-04-22 10:30 ` Wolfgang Denk
2007-04-20 23:03 ` [U-Boot-Users] Proposal for patch to configure network parameters Timur Tabi
2007-04-20 23:29 ` Wolfgang Denk
2007-04-20 23:58 ` [U-Boot-Users] Proposal for patch to configure networkparameters Ulf Samuelsson
2007-04-21 12:41 ` [U-Boot-Users] Proposal for patch to configure network parameters Andreas Schweigstill
2007-04-22 20:11 ` Timur Tabi
2007-04-22 20:31 ` Wolfgang Denk
2007-04-22 21:50 ` [U-Boot-Users] Proposal for patch to configure networkparameters Ulf Samuelsson
2007-04-22 23:57 ` Wolfgang Denk
2007-04-23 5:43 ` Ulf Samuelsson
2007-04-23 6:46 ` [U-Boot-Users] MPC8343 I2C problem Monstr at seznam.cz
2007-04-23 14:46 ` Timur Tabi
2007-04-23 7:00 ` [U-Boot-Users] MPC8343 NET without PHY Monstr at seznam.cz
2007-04-23 14:51 ` Timur Tabi
2007-04-23 8:59 ` [U-Boot-Users] Proposal for patch to configure networkparameters Wolfgang Denk
2007-04-23 9:24 ` Ulf Samuelsson
2007-04-23 10:50 ` Wolfgang Denk
2007-04-23 9:01 ` Ulf Samuelsson
2007-04-22 21:38 ` Ulf Samuelsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='004801c783dd$567ca990$01c4af0a@Glamdring' \
--to=ulf@atmel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox