From mboxrd@z Thu Jan  1 00:00:00 1970
From: Adam Bezanson <bezanson@comcast.net>
Date: Sun, 23 Nov 2003 13:44:38 -0500
Subject: [U-Boot-Users] Binary file cat 
In-Reply-To: <20031123155113.A17E9C5F5F@atlas.denx.de>
Message-ID: <005e01c3b1f1$dc912400$e199fea9@amlp>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Thanks, I'll give that a try. I should have clarified "my processor" a
little more. It's a Cirrus Logic EP9312 and yes indeed there is a boot
rom internal to the processor that does these checks for a signature
that I've put in this header. Essentially it's a way for it to determine
if there's a valid image in flash to boot from, otherwise it tries to
boot from other interfaces. 

I certainly didn't want to do a global change to a Makefile for
something like this.

Regards,
Adam

-----Original Message-----
From: wd@denx.de [mailto:wd at denx.de] 
Sent: Sunday, November 23, 2003 10:51 AM
To: Adam Bezanson
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Binary file cat 

Dear Adam,

in message <002301c3b0bc$19651120$e199fea9@amlp> you wrote:
> 
> I have ported u-boot to my arm920t based system. I have a unique
> situation in that my processor requires a binary header to be placed

Your _processor_? I never head something like that. Are you sure it's
not another existing boot loader on your system?

> Currently I have the header file as a separate file in the root
...
> I don't have to run this script every time. Before I go editing a
> top-level Makefile, I wanted to ask for advice on how I should go
> About doing this? Anything I can do in my board-specific directory
would
> make me feel better.

Me too, and it's actually easier that way. trun your binary header in
an object file and edit the linker script for your board to load this
object first.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"I've finally learned what `upward compatible' means. It means we get
to keep all our old mistakes." - Dennie van Tassel