From: Andy Pont <andy.pont@sdcsystems.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] UBI issues on SAMA5D31 NOR flash
Date: Thu, 2 Oct 2014 09:16:50 +0100 [thread overview]
Message-ID: <006301cfde19$3e253c10$ba6fb430$@pont@sdcsystems.com> (raw)
In-Reply-To: <542BE6EB.4080204@denx.de>
Hello Heiko,
> > UBI error: vtbl_check: reserved_pebs 81, ubi->good_peb_count 80
> > UBI error: vtbl_check: too large reserved_pebs, good PEBs 80
> >
> > Use of UBI is new to me so where are the PEBs configured?
>
> Good question ... looking into vtbl_check(), the "reserved_pebs" value
> is read from the record in the volume table:
>
> reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
>
> "@reserved_pebs: how many physical eraseblocks are reserved for this
> volume"
I have changed the size of the partition as defined in U-Boot and also
reduced the maximum image size when creating the UBI image and have found a
combination that moves me on to the next error:
U-Boot> ubi part rootfs
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 130944 bytes
UBI: smallest flash I/O unit: 1
UBI: VID header offset: 64 (aligned 64)
UBI: data offset: 128
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
- Warning: 1 protected sectors will not be erased!
UBI error: ubi_io_write: error -5 while writing 64 bytes to PEB 0:0, written
0 bytes
UBI error: erase_worker: failed to erase PEB 0, error -5
UBI error: erase_worker: bad physical eraseblock 0 detected
UBI warning: ubi_ro_mode: switch to read-only mode
UBI error: do_work: work failed with error code -5
UBI error: autoresize: cannot auto-resize volume 0
UBI error: ubi_init: cannot attach mtd2
UBI error: ubi_init: UBI error: cannot initialize UBI, error -30
UBI init error 30
Hopefully this may be the last hurdle to overcome but somehow I think maybe
not!
Regards,
Andy.
next prev parent reply other threads:[~2014-10-02 8:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 16:40 [U-Boot] UBI issues on SAMA5D31 NOR flash Andy Pont
2014-09-30 4:39 ` Heiko Schocher
2014-09-30 9:04 ` Andy Pont
2014-09-30 9:36 ` Heiko Schocher
2014-09-30 11:19 ` Andy Pont
2014-10-01 11:35 ` Heiko Schocher
2014-10-02 8:16 ` Andy Pont [this message]
2014-10-02 9:10 ` Heiko Schocher
2014-10-02 9:16 ` Andy Pont
2014-10-02 9:44 ` Andy Pont
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='006301cfde19$3e253c10$ba6fb430$@pont@sdcsystems.com' \
--to=andy.pont@sdcsystems.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox